feat(reboot): Add a standalone reboot-cycle macro

5_Blanton_Script_Reboot_Cycle.ttl loops: login -> sudo -i -> date -s -> fan
speed -> wait_init -> Check Pt1..Pt13 -> show uptime -> reboot -> wait for the
next boot. The cycle number is printed in the banner of every round.

Like Script 4 it is standalone: it does not chain to A -> B -> C and does not
use hw-test-session. Every cycle is a fresh boot, so there is nothing to carry
over and nothing to tear down.

The cdc_ncm probe was copied out of Script B without its :skip_ping label, so
'goto skip_ping' had no target. Tera Term does not check labels at load time -
it raises the error only when it actually jumps, i.e. only when the NCM
interface is missing, which is exactly the run where something is already
wrong. The label is now there, and timeout is restored BEFORE the branch so
one line covers both paths: the ping block waits on a 'sleep 10', already two
thirds of the 15 s cap on a loaded DUT.

Dmesg_i2c and PCIE Error Counters both announced themselves as Check Pt12;
the second is now Pt13.

Not verified on hardware yet. Two things to confirm on the bench: that
wait "Booting in blind mode" really appears in this build's boot output (it
has no timeout guard, so a changed string waits forever), and that re-running
bmc-first-enroll every cycle is safe.

Also ignore tmp/ - scripts not yet run on a DUT stage there, so an unverified
script cannot reach the publish bundle where the tester cannot tell it apart
from the rest.

Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_014RetWKFZFG1ZHcitQAyhwM

.gitignore

@@ -28,3 +28,6 @@ publish/*
 # 客戶板 schematic 原始檔（機密，勿入 repo）
 *.DSN
 *.dsn
+
+# 尚未上機驗證的腳本暫存區（不入 repo，測過再搬進 src/）
+tmp/

src/Script_ABC_Blanton/5_Blanton_Script_Reboot_Cycle.ttl

@@ -0,0 +1,419 @@
+include "config.ttl"
+
+flushrecv
+;================================================================
+; Log File Creation
+;================================================================
+gettime str_starttime "%Y%m%d-%H%M%S"
+getdir mdir
+
+if EN_log = 1 then
+    sprintf2 filename '%s\Logs\%s_%s_%s.log' mdir project_name "Reboot_Cycle" str_starttime
+    logopen filename 0 1 1 1
+endif
+
+cnt_cycle = 0
+
+while 1
+    cnt_cycle = cnt_cycle + 1
+    ; ========== Root Login ==========
+    wait prompt_login
+    sendln "admin"
+    wait "Password:"
+    sendln "YourPaSsWoRd"
+    wait prompt_sonic
+    sendln "sudo -i"
+    wait prompt_sonic_root
+    sendln "sleep 10"
+
+    wait prompt_sonic_root
+    sprintf2 strTitle "echo -e '\033[1;32mReboot Cycle : %d \033[0m'" cnt_cycle
+    sendln strTitle
+
+    ; ========== Pre Setting ==========
+    ; Make log directory
+    wait prompt_sonic_root
+    sendln "mkdir ./logs"
+
+    ; Setting System Time
+    getdate datestr
+    gettime timestr
+    sprintf2 cmd 'sudo date -s "%s %s"' datestr timestr
+    sendln cmd
+
+    ; ========== FAN SPEED ==========
+    wait prompt_sonic_root
+    sendln "echo 18-0020 > /sys/bus/i2c/drivers/max31790/unbind"
+    wait prompt_sonic_root
+    sendln "sleep .5"
+    wait prompt_sonic_root
+    sendln "echo 18-0020 > /sys/bus/i2c/drivers/max31790/bind"
+    wait prompt_sonic_root
+    sendln "echo 25-0020 > /sys/bus/i2c/drivers/max31790/unbind"
+    wait prompt_sonic_root
+    sendln "sleep .5"
+    wait prompt_sonic_root
+    sendln "echo 25-0020 > /sys/bus/i2c/drivers/max31790/bind"
+
+    wait prompt_sonic_root
+    sprintf2 fan_ctrl_cmd 'fan-speed-control.sh %d' FAN_SPEED
+    sendln fan_ctrl_cmd
+
+    wait "Set all configured fan channels to"
+    sendln "y"
+
+    ; ========== Wait DUT Init ==========
+    include "utils/wait_init.ttl"
+
+    ; ========== DUT Info ==========
+    wait prompt_sonic_root
+    sprintf2 strCKPt1 "echo -e '\033[36mCheck Pt1 : DUT Info\033[0m'"
+    sendln strCKPt1
+
+    wait prompt_sonic_root
+    sendln "show boot"
+    wait prompt_sonic_root
+    sendln "show version"
+    wait prompt_sonic_root
+    sendln "fwutil show status"
+    wait prompt_sonic_root
+    sendln "show system-memory"
+    wait prompt_sonic_root
+    sendln "show service"
+    wait prompt_sonic_root
+    sendln "show platform syseeprom"
+    wait prompt_sonic_root
+    sendln "show platform ssdhealth"
+    wait prompt_sonic_root
+    sendln "qfx5252-tpm-version"
+    wait prompt_sonic_root
+    sendln "/usr/sbin/nvme smart-log -H /dev/nvme0"
+    wait prompt_sonic_root
+    sendln "/usr/sbin/smartctl -x /dev/nvme0"
+
+    ; ========== BMC version ==========
+    wait prompt_sonic_root
+    sprintf2 strCKPt2 "echo -e '\033[36mCheck Pt2 : BMC Info\033[0m'"
+    sendln strCKPt2
+
+    wait prompt_sonic_root
+    sendln "bmc-first-enroll"
+    wait prompt_sonic_root
+    sendln "bmc-manager version"
+    wait prompt_sonic_root
+    sendln "bmc-manager status"
+
+    ; ========== Load Shell Script ==========
+    wait prompt_sonic_root
+    sendln "source ~/Blanton_Script/blanton_fpga_pcimem.sh"
+    wait prompt_sonic_root
+    sendln "source ~/Blanton_Script/blanton_cb_i2c.sh"
+    wait prompt_sonic_root
+    sendln "source ~/Blanton_Script/blanton_icb_vi2c.sh"
+    wait prompt_sonic_root
+    sendln "source ~/Blanton_Script/blanton_pwr_data.sh"
+    wait prompt_sonic_root
+    sendln "source ~/Blanton_Script/blanton_traffic_linespeed.sh"
+    wait prompt_sonic_root
+    sendln "source ~/Blanton_Script/LTC2980_Margin_Script/margin.sh"
+
+    ; ========== CLEAR PCIE Error ==========
+    include "utils/show_pcie_error_reg_TH6_SWB0.ttl"
+    include "utils/show_pcie_error_reg_TH6_SWB1.ttl"
+    include "utils/show_pcie_error_reg_FPGA.ttl"
+    include "utils/show_pcie_error_reg_BMC.ttl"
+    include "utils/show_pcie_error_reg_DDR.ttl"
+    include "utils/show_pcie_error_reg_I210.ttl"
+    include "utils/show_pcie_error_reg_SSD.ttl"
+
+    wait prompt_sonic_root
+    sendln "/usr/sbin/ras-mc-ctl --summary"
+
+    ; ========== Check PCIE tree + PCIE link status + GET PCIE bandwidth Test ==========
+    include "utils/pcie_bus.ttl"
+
+    ; ========== TAKE DATA ==========
+    include "utils/setup_pmon.ttl"
+    include "utils/show_dmesg.ttl"
+
+    ; ========== 10G/1G MGMT Ping Test ==========
+    wait prompt_sonic_root
+    sprintf2 strCKPt3 "echo -e '\033[36mCheck Pt3 : Mgmt Ping Test\033[0m'"
+    sendln strCKPt3
+
+    wait prompt_sonic_root
+    sendln "./Blanton_Script/mgmt_ping_monitor.sh start"
+    wait prompt_sonic_root
+    pause 30
+    sendln "~/Blanton_Script/mgmt_ping_monitor.sh stop"
+    wait prompt_sonic_root
+    sendln "cat ~/Blanton_Script/log/mgmt_ping.log"
+    wait prompt_sonic_root
+    sendln "~/Blanton_Script/mgmt_ping_monitor.sh clear"
+
+    ; ========== NFC Test ==========
+    wait prompt_sonic_root
+    sprintf2 strCKPt4 "echo -e '\033[36mCheck Pt4 : NFC Test\033[0m'"
+    sendln strCKPt4
+
+    wait prompt_sonic_root
+    sendln "~/Blanton_Script/nfc_polling.sh start"
+    wait prompt_sonic_root
+    sendln "~/Blanton_Script/nfc_polling.sh status"
+    wait prompt_sonic_root
+    sendln "sleep 20"
+    wait prompt_sonic_root
+    sendln "~/Blanton_Script/nfc_polling.sh stop"
+    wait prompt_sonic_root
+    sendln "~/Blanton_Script/nfc_polling.sh report"
+
+    ; ========== SSD read/write ==========
+    wait prompt_sonic_root
+    sprintf2 strCKPt5 "echo -e '\033[36mCheck Pt5 : SSD Test\033[0m'"
+    sendln strCKPt5
+
+    wait prompt_sonic_root
+    sendln "qfx5252-stress-ssd 1G --runtime 30 --passes 2 --write --force --log /host/hw-eval/jobs/qfx5252-stress-ssd.log"
+    wait prompt_sonic_root
+    sendln "cat /host/hw-eval/jobs/qfx5252-stress-ssd.log"
+
+    ; ========== USB read/write ==========
+    wait prompt_sonic_root
+    sprintf2 strCKPt6 "echo -e '\033[36mCheck Pt6 : USB Test\033[0m'"
+    sendln strCKPt6
+
+    ; ---- Get USB partition node -> usb_dev ----
+    usb_dev = ''
+    wait prompt_sonic_root
+    sendln 'D=$(bash ~/Blanton_Script/usb_target.sh -o dev 2>/dev/null); echo "<<D""EV=${D:-NONE}>>"'
+    waitregex '<<DEV=([^>]*)>>'
+    usb_dev = groupmatchstr1
+
+    wait prompt_sonic_root
+    sprintf2 cmd "qfx5252-stress-usb %s 256M --runtime 30 --passes 2 --write --log /host/hw-eval/jobs/qfx5252-stress-usb.log" usb_dev
+    sendln cmd
+    wait prompt_sonic_root
+    sendln "cat /host/hw-eval/jobs/qfx5252-stress-usb.log"
+
+    ; ========== BMC USB Test ==========
+    wait prompt_sonic_root
+    sprintf2 strCKPt7 "echo -e '\033[36mCheck Pt7 : BMC USB Test\033[0m'"
+    sendln strCKPt7
+
+    wait prompt_sonic_root
+    sendln 'echo "NCMIF=$(ls -d /sys/bus/usb/drivers/cdc_ncm/*/net/* 2>/dev/null | head -n 1 | xargs -r basename)"'
+    ; timeout is GLOBAL and sticky: left at 15, every 'wait' below gives up after
+    ; 15 s instead of blocking, the macro runs ahead of the DUT and the whole
+    ; cycle desynchronises. Restore it BEFORE the branch so both paths are
+    ; covered - the ping block below waits on 'sleep 10', which is already two
+    ; thirds of the 15 s cap on a loaded DUT.
+    timeout = 15
+    waitregex 'NCMIF=[A-Za-z0-9_-]+'
+    ncm_found = result                      ; hold it: 'result' is reused below
+    timeout = 0                             ; restore, both paths
+    if ncm_found = 0 then
+        messagebox 'cdc_ncm interface not found. Ping test skipped.' 'ERROR'
+        goto skip_ping
+    endif
+    strlen matchstr
+    cut_len = result - 6                    ; 'NCMIF=' = 6 chars
+    strcopy matchstr 7 cut_len ncm_if       ; -> ncm_if = "eth2" / "eth3"
+
+    sprintf2 cmd 'ip -br link show %s' ncm_if
+    wait prompt_sonic_root
+    sendln cmd
+
+    wait prompt_sonic_root
+    sendln 'systemctl stop qfx5252-bmc-usb-net-test.service 2>/dev/null || true'
+    wait prompt_sonic_root
+    sendln 'systemctl reset-failed qfx5252-bmc-usb-net-test.service 2>/dev/null || true'
+    sprintf2 cmd 'systemd-run --unit=qfx5252-bmc-usb-net-test --property=Type=exec /usr/bin/ping -I %s -i 1 -W 2 -w 14400 192.168.200.200' ncm_if
+    wait prompt_sonic_root
+    sendln cmd
+    wait prompt_sonic_root
+    sendln "sleep 10"
+    wait prompt_sonic_root
+    sendln "systemctl stop qfx5252-bmc-usb-net-test.service"
+    wait prompt_sonic_root
+    sendln "journalctl -u qfx5252-bmc-usb-net-test.service --no-pager"
+
+:skip_ping
+    timeout = 0                             ; backstop, same as Script B
+
+    ; ========== 100G Port Setting ==========
+    wait prompt_sonic_root
+    sendln "sudo sfputil lpmode off Ethernet513"
+    wait prompt_sonic_root
+    sendln "sudo sfputil lpmode off Ethernet514"
+    wait prompt_sonic_root
+    sendln "config interface -n asic0 startup  Ethernet513"
+    wait prompt_sonic_root
+    sendln "config interface -n asic1 startup  Ethernet514"
+    wait prompt_sonic_root
+    sendln "config save -y"
+
+    ; ========== First Traffic Test ==========
+    ; Silent MAC
+    wait prompt_sonic_root
+    sendln "config feature state lldp disabled"
+    wait prompt_sonic_root
+    sendln "config save -y"
+
+    ; ========== 100G Port Status ==========
+    wait prompt_sonic_root
+    sprintf2 strCKPt8 "echo -e '\033[36mCheck Pt8 : Port Status and 15sec Traffic \033[0m'"
+    sendln strCKPt8
+
+    wait prompt_sonic_root
+    sendln "show interfaces status Ethernet513,Ethernet514"
+
+    ; ========== Traffic Test ==========
+    if SWB_UNIT0 = 1 && SWB_UNIT1 = 1 then
+        wait prompt_sonic_root
+        sendln "blanton_traffic_linespeed ps"
+        wait prompt_sonic_root
+        sendln "blanton_traffic_linespeed init"
+        wait prompt_sonic_root
+        sendln "blanton_traffic_linespeed clear"
+        wait prompt_sonic_root
+        sendln "blanton_traffic_linespeed show"
+        wait prompt_sonic_root
+        sendln "blanton_traffic_linespeed start"
+        wait prompt_sonic_root
+        pause 15
+        sendln "blanton_traffic_linespeed stop"
+        wait prompt_sonic_root
+        sendln "blanton_traffic_linespeed report"
+    elseif SWB_UNIT0 = 1 && SWB_UNIT1 = 0 then
+        wait prompt_sonic_root
+        sendln "blanton_traffic_linespeed ps -u 0"
+        wait prompt_sonic_root
+        sendln "blanton_traffic_linespeed init -u 0"
+        wait prompt_sonic_root
+        sendln "blanton_traffic_linespeed clear -u 0"
+        wait prompt_sonic_root
+        sendln "blanton_traffic_linespeed show -u 0"
+        wait prompt_sonic_root
+        sendln "blanton_traffic_linespeed start -u 0"
+        wait prompt_sonic_root
+        pause 15
+        sendln "blanton_traffic_linespeed stop -u 0"
+        wait prompt_sonic_root
+        sendln "blanton_traffic_linespeed report -u 0"
+    elseif SWB_UNIT0 = 0 && SWB_UNIT1 = 1 then
+        wait prompt_sonic_root
+        sendln "blanton_traffic_linespeed ps -u 1"
+        wait prompt_sonic_root
+        sendln "blanton_traffic_linespeed init -u 1"
+        wait prompt_sonic_root
+        sendln "blanton_traffic_linespeed clear -u 1"
+        wait prompt_sonic_root
+        sendln "blanton_traffic_linespeed show -u 1"
+        wait prompt_sonic_root
+        sendln "blanton_traffic_linespeed start -u 1"
+        wait prompt_sonic_root
+        pause 15
+        sendln "blanton_traffic_linespeed stop -u 1"
+        wait prompt_sonic_root
+        sendln "blanton_traffic_linespeed report -u 1"
+    else
+
+    endif
+
+    ; ========== BER ==========
+    ; PRBS takes the SerDes out of normal operation, so this runs AFTER the
+    ; traffic report. sleep 30 matches blanton_ber.sh BER_INTERVAL - reporting
+    ; earlier reads an interval that has not finished accumulating.
+    wait prompt_sonic_root
+    sprintf2 strCKPt8 "echo -e '\033[36mCheck Pt9 : BER Test \033[0m'"
+    sendln strCKPt8
+
+    if SWB_UNIT0 = 1 && SWB_UNIT1 = 1 then
+        wait prompt_sonic_root
+        sendln "./Blanton_Script/blanton_ber.sh init"
+        wait prompt_sonic_root
+        sendln "./Blanton_Script/blanton_ber.sh start"
+        wait prompt_sonic_root
+        sendln "sleep 30"
+        wait prompt_sonic_root
+        sendln "./Blanton_Script/blanton_ber.sh report"
+        wait prompt_sonic_root
+        sendln "./Blanton_Script/blanton_ber.sh stop"
+        wait prompt_sonic_root
+        sendln "./Blanton_Script/blanton_ber.sh clear"
+    elseif SWB_UNIT0 = 1 && SWB_UNIT1 = 0 then
+        wait prompt_sonic_root
+        sendln "./Blanton_Script/blanton_ber.sh init -u 0"
+        wait prompt_sonic_root
+        sendln "./Blanton_Script/blanton_ber.sh start -u 0"
+        wait prompt_sonic_root
+        sendln "sleep 30"
+        wait prompt_sonic_root
+        sendln "./Blanton_Script/blanton_ber.sh report -u 0"
+        wait prompt_sonic_root
+        sendln "./Blanton_Script/blanton_ber.sh stop -u 0"
+        wait prompt_sonic_root
+        sendln "./Blanton_Script/blanton_ber.sh clear -u 0"
+    elseif SWB_UNIT0 = 0 && SWB_UNIT1 = 1 then
+        wait prompt_sonic_root
+        sendln "./Blanton_Script/blanton_ber.sh init -u 1"
+        wait prompt_sonic_root
+        sendln "./Blanton_Script/blanton_ber.sh start -u 1"
+        wait prompt_sonic_root
+        sendln "sleep 30"
+        wait prompt_sonic_root
+        sendln "./Blanton_Script/blanton_ber.sh report -u 1"
+        wait prompt_sonic_root
+        sendln "./Blanton_Script/blanton_ber.sh stop -u 1"
+        wait prompt_sonic_root
+        sendln "./Blanton_Script/blanton_ber.sh clear -u 1"
+    else
+
+    endif
+
+    ; ========== NVME Err Info ==========
+    wait prompt_sonic_root
+    sprintf2 strCKPt9 "echo -e '\033[36mCheck Pt10 : NVME Err Info \033[0m'"
+    sendln strCKPt9
+
+    wait prompt_sonic_root
+    sendln "/usr/sbin/nvme smart-log -H /dev/nvme0"
+    wait prompt_sonic_root
+    sendln "/usr/sbin/smartctl -x /dev/nvme0"
+
+    ; ========== TAKE DATA ==========
+    wait prompt_sonic_root
+    sprintf2 strCKPt10 "echo -e '\033[36mCheck Pt11 : Platform Data \033[0m'"
+    sendln strCKPt10
+    include "utils/setup_pmon.ttl"
+
+    wait prompt_sonic_root
+    sprintf2 strCKPt12 "echo -e '\033[36mCheck Pt12 : Dmesg_i2c \033[0m'"
+    sendln strCKPt12
+    include "utils/show_dmesg.ttl"
+
+    ; ========== Check PCIE error counters ==========
+    wait prompt_sonic_root
+    sprintf2 strCKPt13 "echo -e '\033[36mCheck Pt13 : PCIE Error Counters \033[0m'"
+    sendln strCKPt13
+    include "utils/show_pcie_error_reg_TH6_SWB0.ttl"
+    include "utils/show_pcie_error_reg_TH6_SWB1.ttl"
+    include "utils/show_pcie_error_reg_FPGA.ttl"
+    include "utils/show_pcie_error_reg_BMC.ttl"
+    include "utils/show_pcie_error_reg_DDR.ttl"
+    include "utils/show_pcie_error_reg_I210.ttl"
+    include "utils/show_pcie_error_reg_SSD.ttl"
+
+    wait prompt_sonic_root
+    sendln "/usr/sbin/ras-mc-ctl --summary"
+
+    ; ========== Show Power on uptime ==========
+    wait prompt_sonic_root
+    sendln "show uptime"
+
+    ; ========== Show Power on uptime ==========
+    wait prompt_sonic_root
+    sendln "reboot"
+
+    wait "Booting in blind mode"
+endwhile