etwen/Blanton_TTL_Script
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases 18 Wiki Activity

feat(reboot): Add a standalone reboot-cycle macro

Browse Source 
5_Blanton_Script_Reboot_Cycle.ttl loops: login -> sudo -i -> date -s -> fan
speed -> wait_init -> Check Pt1..Pt13 -> show uptime -> reboot -> wait for the
next boot. The cycle number is printed in the banner of every round.

Like Script 4 it is standalone: it does not chain to A -> B -> C and does not
use hw-test-session. Every cycle is a fresh boot, so there is nothing to carry
over and nothing to tear down.

The cdc_ncm probe was copied out of Script B without its :skip_ping label, so
'goto skip_ping' had no target. Tera Term does not check labels at load time -
it raises the error only when it actually jumps, i.e. only when the NCM
interface is missing, which is exactly the run where something is already
wrong. The label is now there, and timeout is restored BEFORE the branch so
one line covers both paths: the ping block waits on a 'sleep 10', already two
thirds of the 15 s cap on a loaded DUT.

Dmesg_i2c and PCIE Error Counters both announced themselves as Check Pt12;
the second is now Pt13.

Not verified on hardware yet. Two things to confirm on the bench: that
wait "Booting in blind mode" really appears in this build's boot output (it
has no timeout guard, so a changed string waits forever), and that re-running
bmc-first-enroll every cycle is safe.

Also ignore tmp/ - scripts not yet run on a DUT stage there, so an unverified
script cannot reach the publish bundle where the tester cannot tell it apart
from the rest.

Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_014RetWKFZFG1ZHcitQAyhwM
This commit is contained in:
etwen
2026-09-04 22:44:21 +08:00
co-authored by Claude Opus 5
parent 0d2faef565
commit 1fbdcc23d6
2 changed files with 422 additions and 0 deletions
Download Patch File Download Diff File Expand all files Collapse all files
.gitignore
+3
View File
@@ -28,3 +28,6 @@ publish/*
# 客戶板 schematic 原始檔（機密，勿入 repo）
*.DSN
*.dsn
# 尚未上機驗證的腳本暫存區（不入 repo，測過再搬進 src/）
tmp/
src/Script_ABC_Blanton/5_Blanton_Script_Reboot_Cycle.ttl
+419
View File
@@ -0,0 +1,419 @@
include "config.ttl"
flushrecv
;================================================================
; Log File Creation
;================================================================
gettime str_starttime "%Y%m%d-%H%M%S"
getdir mdir
if EN_log = 1 then
sprintf2 filename '%s\Logs\%s_%s_%s.log' mdir project_name "Reboot_Cycle" str_starttime
logopen filename 0 1 1 1
endif
cnt_cycle = 0
while 1
cnt_cycle = cnt_cycle + 1
; ========== Root Login ==========
wait prompt_login
sendln "admin"
wait "Password:"
sendln "YourPaSsWoRd"
wait prompt_sonic
sendln "sudo -i"
wait prompt_sonic_root
sendln "sleep 10"
wait prompt_sonic_root
sprintf2 strTitle "echo -e '\033[1;32mReboot Cycle : %d \033[0m'" cnt_cycle
sendln strTitle
; ========== Pre Setting ==========
; Make log directory
wait prompt_sonic_root
sendln "mkdir ./logs"
; Setting System Time
getdate datestr
gettime timestr
sprintf2 cmd 'sudo date -s "%s %s"' datestr timestr
sendln cmd
; ========== FAN SPEED ==========
wait prompt_sonic_root
sendln "echo 18-0020 > /sys/bus/i2c/drivers/max31790/unbind"
wait prompt_sonic_root
sendln "sleep .5"
wait prompt_sonic_root
sendln "echo 18-0020 > /sys/bus/i2c/drivers/max31790/bind"
wait prompt_sonic_root
sendln "echo 25-0020 > /sys/bus/i2c/drivers/max31790/unbind"
wait prompt_sonic_root
sendln "sleep .5"
wait prompt_sonic_root
sendln "echo 25-0020 > /sys/bus/i2c/drivers/max31790/bind"
wait prompt_sonic_root
sprintf2 fan_ctrl_cmd 'fan-speed-control.sh %d' FAN_SPEED
sendln fan_ctrl_cmd
wait "Set all configured fan channels to"
sendln "y"
; ========== Wait DUT Init ==========
include "utils/wait_init.ttl"
; ========== DUT Info ==========
wait prompt_sonic_root
sprintf2 strCKPt1 "echo -e '\033[36mCheck Pt1 : DUT Info\033[0m'"
sendln strCKPt1
wait prompt_sonic_root
sendln "show boot"
wait prompt_sonic_root
sendln "show version"
wait prompt_sonic_root
sendln "fwutil show status"
wait prompt_sonic_root
sendln "show system-memory"
wait prompt_sonic_root
sendln "show service"
wait prompt_sonic_root
sendln "show platform syseeprom"
wait prompt_sonic_root
sendln "show platform ssdhealth"
wait prompt_sonic_root
sendln "qfx5252-tpm-version"
wait prompt_sonic_root
sendln "/usr/sbin/nvme smart-log -H /dev/nvme0"
wait prompt_sonic_root
sendln "/usr/sbin/smartctl -x /dev/nvme0"
; ========== BMC version ==========
wait prompt_sonic_root
sprintf2 strCKPt2 "echo -e '\033[36mCheck Pt2 : BMC Info\033[0m'"
sendln strCKPt2
wait prompt_sonic_root
sendln "bmc-first-enroll"
wait prompt_sonic_root
sendln "bmc-manager version"
wait prompt_sonic_root
sendln "bmc-manager status"
; ========== Load Shell Script ==========
wait prompt_sonic_root
sendln "source ~/Blanton_Script/blanton_fpga_pcimem.sh"
wait prompt_sonic_root
sendln "source ~/Blanton_Script/blanton_cb_i2c.sh"
wait prompt_sonic_root
sendln "source ~/Blanton_Script/blanton_icb_vi2c.sh"
wait prompt_sonic_root
sendln "source ~/Blanton_Script/blanton_pwr_data.sh"
wait prompt_sonic_root
sendln "source ~/Blanton_Script/blanton_traffic_linespeed.sh"
wait prompt_sonic_root
sendln "source ~/Blanton_Script/LTC2980_Margin_Script/margin.sh"
; ========== CLEAR PCIE Error ==========
include "utils/show_pcie_error_reg_TH6_SWB0.ttl"
include "utils/show_pcie_error_reg_TH6_SWB1.ttl"
include "utils/show_pcie_error_reg_FPGA.ttl"
include "utils/show_pcie_error_reg_BMC.ttl"
include "utils/show_pcie_error_reg_DDR.ttl"
include "utils/show_pcie_error_reg_I210.ttl"
include "utils/show_pcie_error_reg_SSD.ttl"
wait prompt_sonic_root
sendln "/usr/sbin/ras-mc-ctl --summary"
; ========== Check PCIE tree + PCIE link status + GET PCIE bandwidth Test ==========
include "utils/pcie_bus.ttl"
; ========== TAKE DATA ==========
include "utils/setup_pmon.ttl"
include "utils/show_dmesg.ttl"
; ========== 10G/1G MGMT Ping Test ==========
wait prompt_sonic_root
sprintf2 strCKPt3 "echo -e '\033[36mCheck Pt3 : Mgmt Ping Test\033[0m'"
sendln strCKPt3
wait prompt_sonic_root
sendln "./Blanton_Script/mgmt_ping_monitor.sh start"
wait prompt_sonic_root
pause 30
sendln "~/Blanton_Script/mgmt_ping_monitor.sh stop"
wait prompt_sonic_root
sendln "cat ~/Blanton_Script/log/mgmt_ping.log"
wait prompt_sonic_root
sendln "~/Blanton_Script/mgmt_ping_monitor.sh clear"
; ========== NFC Test ==========
wait prompt_sonic_root
sprintf2 strCKPt4 "echo -e '\033[36mCheck Pt4 : NFC Test\033[0m'"
sendln strCKPt4
wait prompt_sonic_root
sendln "~/Blanton_Script/nfc_polling.sh start"
wait prompt_sonic_root
sendln "~/Blanton_Script/nfc_polling.sh status"
wait prompt_sonic_root
sendln "sleep 20"
wait prompt_sonic_root
sendln "~/Blanton_Script/nfc_polling.sh stop"
wait prompt_sonic_root
sendln "~/Blanton_Script/nfc_polling.sh report"
; ========== SSD read/write ==========
wait prompt_sonic_root
sprintf2 strCKPt5 "echo -e '\033[36mCheck Pt5 : SSD Test\033[0m'"
sendln strCKPt5
wait prompt_sonic_root
sendln "qfx5252-stress-ssd 1G --runtime 30 --passes 2 --write --force --log /host/hw-eval/jobs/qfx5252-stress-ssd.log"
wait prompt_sonic_root
sendln "cat /host/hw-eval/jobs/qfx5252-stress-ssd.log"
; ========== USB read/write ==========
wait prompt_sonic_root
sprintf2 strCKPt6 "echo -e '\033[36mCheck Pt6 : USB Test\033[0m'"
sendln strCKPt6
; ---- Get USB partition node -> usb_dev ----
usb_dev = ''
wait prompt_sonic_root
sendln 'D=$(bash ~/Blanton_Script/usb_target.sh -o dev 2>/dev/null); echo "<<D""EV=${D:-NONE}>>"'
waitregex '<<DEV=([^>]*)>>'
usb_dev = groupmatchstr1
wait prompt_sonic_root
sprintf2 cmd "qfx5252-stress-usb %s 256M --runtime 30 --passes 2 --write --log /host/hw-eval/jobs/qfx5252-stress-usb.log" usb_dev
sendln cmd
wait prompt_sonic_root
sendln "cat /host/hw-eval/jobs/qfx5252-stress-usb.log"
; ========== BMC USB Test ==========
wait prompt_sonic_root
sprintf2 strCKPt7 "echo -e '\033[36mCheck Pt7 : BMC USB Test\033[0m'"
sendln strCKPt7
wait prompt_sonic_root
sendln 'echo "NCMIF=$(ls -d /sys/bus/usb/drivers/cdc_ncm/*/net/* 2>/dev/null | head -n 1 | xargs -r basename)"'
; timeout is GLOBAL and sticky: left at 15, every 'wait' below gives up after
; 15 s instead of blocking, the macro runs ahead of the DUT and the whole
; cycle desynchronises. Restore it BEFORE the branch so both paths are
; covered - the ping block below waits on 'sleep 10', which is already two
; thirds of the 15 s cap on a loaded DUT.
timeout = 15
waitregex 'NCMIF=[A-Za-z0-9_-]+'
ncm_found = result ; hold it: 'result' is reused below
timeout = 0 ; restore, both paths
if ncm_found = 0 then
messagebox 'cdc_ncm interface not found. Ping test skipped.' 'ERROR'
goto skip_ping
endif
strlen matchstr
cut_len = result - 6 ; 'NCMIF=' = 6 chars
strcopy matchstr 7 cut_len ncm_if ; -> ncm_if = "eth2" / "eth3"
sprintf2 cmd 'ip -br link show %s' ncm_if
wait prompt_sonic_root
sendln cmd
wait prompt_sonic_root
sendln 'systemctl stop qfx5252-bmc-usb-net-test.service 2>/dev/null || true'
wait prompt_sonic_root
sendln 'systemctl reset-failed qfx5252-bmc-usb-net-test.service 2>/dev/null || true'
sprintf2 cmd 'systemd-run --unit=qfx5252-bmc-usb-net-test --property=Type=exec /usr/bin/ping -I %s -i 1 -W 2 -w 14400 192.168.200.200' ncm_if
wait prompt_sonic_root
sendln cmd
wait prompt_sonic_root
sendln "sleep 10"
wait prompt_sonic_root
sendln "systemctl stop qfx5252-bmc-usb-net-test.service"
wait prompt_sonic_root
sendln "journalctl -u qfx5252-bmc-usb-net-test.service --no-pager"
:skip_ping
timeout = 0 ; backstop, same as Script B
; ========== 100G Port Setting ==========
wait prompt_sonic_root
sendln "sudo sfputil lpmode off Ethernet513"
wait prompt_sonic_root
sendln "sudo sfputil lpmode off Ethernet514"
wait prompt_sonic_root
sendln "config interface -n asic0 startup Ethernet513"
wait prompt_sonic_root
sendln "config interface -n asic1 startup Ethernet514"
wait prompt_sonic_root
sendln "config save -y"
; ========== First Traffic Test ==========
; Silent MAC
wait prompt_sonic_root
sendln "config feature state lldp disabled"
wait prompt_sonic_root
sendln "config save -y"
; ========== 100G Port Status ==========
wait prompt_sonic_root
sprintf2 strCKPt8 "echo -e '\033[36mCheck Pt8 : Port Status and 15sec Traffic \033[0m'"
sendln strCKPt8
wait prompt_sonic_root
sendln "show interfaces status Ethernet513,Ethernet514"
; ========== Traffic Test ==========
if SWB_UNIT0 = 1 && SWB_UNIT1 = 1 then
wait prompt_sonic_root
sendln "blanton_traffic_linespeed ps"
wait prompt_sonic_root
sendln "blanton_traffic_linespeed init"
wait prompt_sonic_root
sendln "blanton_traffic_linespeed clear"
wait prompt_sonic_root
sendln "blanton_traffic_linespeed show"
wait prompt_sonic_root
sendln "blanton_traffic_linespeed start"
wait prompt_sonic_root
pause 15
sendln "blanton_traffic_linespeed stop"
wait prompt_sonic_root
sendln "blanton_traffic_linespeed report"
elseif SWB_UNIT0 = 1 && SWB_UNIT1 = 0 then
wait prompt_sonic_root
sendln "blanton_traffic_linespeed ps -u 0"
wait prompt_sonic_root
sendln "blanton_traffic_linespeed init -u 0"
wait prompt_sonic_root
sendln "blanton_traffic_linespeed clear -u 0"
wait prompt_sonic_root
sendln "blanton_traffic_linespeed show -u 0"
wait prompt_sonic_root
sendln "blanton_traffic_linespeed start -u 0"
wait prompt_sonic_root
pause 15
sendln "blanton_traffic_linespeed stop -u 0"
wait prompt_sonic_root
sendln "blanton_traffic_linespeed report -u 0"
elseif SWB_UNIT0 = 0 && SWB_UNIT1 = 1 then
wait prompt_sonic_root
sendln "blanton_traffic_linespeed ps -u 1"
wait prompt_sonic_root
sendln "blanton_traffic_linespeed init -u 1"
wait prompt_sonic_root
sendln "blanton_traffic_linespeed clear -u 1"
wait prompt_sonic_root
sendln "blanton_traffic_linespeed show -u 1"
wait prompt_sonic_root
sendln "blanton_traffic_linespeed start -u 1"
wait prompt_sonic_root
pause 15
sendln "blanton_traffic_linespeed stop -u 1"
wait prompt_sonic_root
sendln "blanton_traffic_linespeed report -u 1"
else
endif
; ========== BER ==========
; PRBS takes the SerDes out of normal operation, so this runs AFTER the
; traffic report. sleep 30 matches blanton_ber.sh BER_INTERVAL - reporting
; earlier reads an interval that has not finished accumulating.
wait prompt_sonic_root
sprintf2 strCKPt8 "echo -e '\033[36mCheck Pt9 : BER Test \033[0m'"
sendln strCKPt8
if SWB_UNIT0 = 1 && SWB_UNIT1 = 1 then
wait prompt_sonic_root
sendln "./Blanton_Script/blanton_ber.sh init"
wait prompt_sonic_root
sendln "./Blanton_Script/blanton_ber.sh start"
wait prompt_sonic_root
sendln "sleep 30"
wait prompt_sonic_root
sendln "./Blanton_Script/blanton_ber.sh report"
wait prompt_sonic_root
sendln "./Blanton_Script/blanton_ber.sh stop"
wait prompt_sonic_root
sendln "./Blanton_Script/blanton_ber.sh clear"
elseif SWB_UNIT0 = 1 && SWB_UNIT1 = 0 then
wait prompt_sonic_root
sendln "./Blanton_Script/blanton_ber.sh init -u 0"
wait prompt_sonic_root
sendln "./Blanton_Script/blanton_ber.sh start -u 0"
wait prompt_sonic_root
sendln "sleep 30"
wait prompt_sonic_root
sendln "./Blanton_Script/blanton_ber.sh report -u 0"
wait prompt_sonic_root
sendln "./Blanton_Script/blanton_ber.sh stop -u 0"
wait prompt_sonic_root
sendln "./Blanton_Script/blanton_ber.sh clear -u 0"
elseif SWB_UNIT0 = 0 && SWB_UNIT1 = 1 then
wait prompt_sonic_root
sendln "./Blanton_Script/blanton_ber.sh init -u 1"
wait prompt_sonic_root
sendln "./Blanton_Script/blanton_ber.sh start -u 1"
wait prompt_sonic_root
sendln "sleep 30"
wait prompt_sonic_root
sendln "./Blanton_Script/blanton_ber.sh report -u 1"
wait prompt_sonic_root
sendln "./Blanton_Script/blanton_ber.sh stop -u 1"
wait prompt_sonic_root
sendln "./Blanton_Script/blanton_ber.sh clear -u 1"
else
endif
; ========== NVME Err Info ==========
wait prompt_sonic_root
sprintf2 strCKPt9 "echo -e '\033[36mCheck Pt10 : NVME Err Info \033[0m'"
sendln strCKPt9
wait prompt_sonic_root
sendln "/usr/sbin/nvme smart-log -H /dev/nvme0"
wait prompt_sonic_root
sendln "/usr/sbin/smartctl -x /dev/nvme0"
; ========== TAKE DATA ==========
wait prompt_sonic_root
sprintf2 strCKPt10 "echo -e '\033[36mCheck Pt11 : Platform Data \033[0m'"
sendln strCKPt10
include "utils/setup_pmon.ttl"
wait prompt_sonic_root
sprintf2 strCKPt12 "echo -e '\033[36mCheck Pt12 : Dmesg_i2c \033[0m'"
sendln strCKPt12
include "utils/show_dmesg.ttl"
; ========== Check PCIE error counters ==========
wait prompt_sonic_root
sprintf2 strCKPt13 "echo -e '\033[36mCheck Pt13 : PCIE Error Counters \033[0m'"
sendln strCKPt13
include "utils/show_pcie_error_reg_TH6_SWB0.ttl"
include "utils/show_pcie_error_reg_TH6_SWB1.ttl"
include "utils/show_pcie_error_reg_FPGA.ttl"
include "utils/show_pcie_error_reg_BMC.ttl"
include "utils/show_pcie_error_reg_DDR.ttl"
include "utils/show_pcie_error_reg_I210.ttl"
include "utils/show_pcie_error_reg_SSD.ttl"
wait prompt_sonic_root
sendln "/usr/sbin/ras-mc-ctl --summary"
; ========== Show Power on uptime ==========
wait prompt_sonic_root
sendln "show uptime"
; ========== Show Power on uptime ==========
wait prompt_sonic_root
sendln "reboot"
wait "Booting in blind mode"
endwhile