etwen/Blanton_TTL_Script
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases 18 Wiki Activity

feat(boot): Name the log and the banner after the kind of boot

Browse Source 
EN_Cold_Warm_boot = 1 opens Logs\Blanton_Reboot_Cycle_<ts>.log and prints
a "Reboot Cycle : N" banner each round; = 2 opens
Blanton_Power_Cycle_<ts>.log and prints "Power Cycle : N". Three sites
branch on the flag now: the log name, the banner, and the boot itself.

Two things follow from it.

With EN_Cold_Warm_boot = 0 there is no longer a logopen either, so the
run that already hangs at wait "Booting in blind mode" now also leaves no
log to show where it stopped. EN_log = 1 on its own no longer produces a
log from this macro.

And anything that parses these logs has to accept both banners. The cycle
banner is the record separator the check-point and per-segment timing
reports are built on, so a parser that only greps "Reboot Cycle :" finds
zero cycles in a power-cycle log and reports nothing without complaining.

The logopen timestamp flag stays a literal 1 rather than EN_timestamp the
way Script A does it. That is the right call here - the per-segment
timing analysis is derived from those timestamps and there is no other
way to recover them - but it does mean this macro ignores
EN_timestamp = 0.

Recorded under V1.2.2 in Script A's history; the header version is
unchanged because V1.2.2 has not been tagged.

Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_014RetWKFZFG1ZHcitQAyhwM
This commit is contained in:
etwen
2026-09-09 10:15:39 +08:00
co-authored by Claude Opus 5
parent f5694345fb
commit a5b7c4757b
2 changed files with 41 additions and 5 deletions
Download Patch File Download Diff File Expand all files Collapse all files
src/Script_ABC_Blanton/1_Blanton_Script_A.ttl
+23
View File
@@ -607,6 +607,29 @@
; eleven segments between check points drifted by less than ; eleven segments between check points drifted by less than
; 1.5 s each. The DUT was never getting slower; the test ; 1.5 s each. The DUT was never getting slower; the test
; was reading its own history aloud once per cycle ; was reading its own history aloud once per cycle
; 5_.._Boot_Cycle.ttl Name the log file and the banner after the kind of boot
; EN_Cold_Warm_boot = 1 gives
; Logs\Blanton_Reboot_Cycle_<ts>.log and a 'Reboot Cycle :
; N' banner; = 2 gives Blanton_Power_Cycle_<ts>.log and
; 'Power Cycle : N'. Three sites now branch on the flag:
; the log name, the banner and the boot itself
; !! with 0 there is no longer a logopen either, so the run
; that already hangs at wait "Booting in blind mode" now
; also leaves no log to show where it stopped. EN_log =
; 1 no longer guarantees a log in this macro -
; EN_Cold_Warm_boot has to be 1 or 2 as well
; !! anything that parses these logs has to accept BOTH
; banners. The cycle banner is the record separator the
; check-point and per-segment timing reports are built
; on, so a parser that only greps 'Reboot Cycle :' finds
; zero cycles in a power-cycle log and silently reports
; nothing at all
; The logopen timestamp flag is still a literal 1 here
; rather than EN_timestamp the way ScriptA does it. Leaving
; it on is the right call - the per-segment timing analysis
; is derived from those timestamps and there is nothing
; else to recover them from - but it does mean this macro
; ignores EN_timestamp = 0
; config.ttl Add EN_Cold_Warm_boot ; config.ttl Add EN_Cold_Warm_boot
; 0 = normal test (A/B/C), 1 = reboot cycle, 2 = power ; 0 = normal test (A/B/C), 1 = reboot cycle, 2 = power
; cycle. Default 0 so that opening the shared config cannot ; cycle. Default 0 so that opening the shared config cannot
src/Script_ABC_Blanton/5_Blanton_Script_Boot_Cycle.ttl
+13
View File
@@ -8,8 +8,14 @@ gettime str_starttime "%Y%m%d-%H%M%S"
getdir mdir getdir mdir
if EN_log = 1 then if EN_log = 1 then
if EN_Cold_Warm_boot = 1 then
sprintf2 filename '%s\Logs\%s_%s_%s.log' mdir project_name "Reboot_Cycle" str_starttime sprintf2 filename '%s\Logs\%s_%s_%s.log' mdir project_name "Reboot_Cycle" str_starttime
logopen filename 0 1 1 1 logopen filename 0 1 1 1
elseif EN_Cold_Warm_boot = 2 then
sprintf2 filename '%s\Logs\%s_%s_%s.log' mdir project_name "Power_Cycle" str_starttime
logopen filename 0 1 1 1
else
endif
endif endif
cnt_cycle = 0 cnt_cycle = 0
@@ -26,9 +32,16 @@ while 1
wait prompt_sonic_root wait prompt_sonic_root
sendln "sleep 10" sendln "sleep 10"
if EN_Cold_Warm_boot = 1 then
wait prompt_sonic_root wait prompt_sonic_root
sprintf2 strTitle "echo -e '\033[1;32mReboot Cycle : %d \033[0m'" cnt_cycle sprintf2 strTitle "echo -e '\033[1;32mReboot Cycle : %d \033[0m'" cnt_cycle
sendln strTitle sendln strTitle
elseif EN_Cold_Warm_boot = 2 then
wait prompt_sonic_root
sprintf2 strTitle "echo -e '\033[1;32mPower Cycle : %d \033[0m'" cnt_cycle
sendln strTitle
else
endif
; ========== Pre Setting ========== ; ========== Pre Setting ==========
; Make log directory ; Make log directory