fix(session): Clear the last run's jobs and session before starting

After a run that ended badly - Tera Term closed, DUT rebooted mid-soak,
macro stopped by hand - the stress jobs kept running and the test session
stayed open. The next run then started on a box that was already loaded.
Nothing errored; the numbers were just quietly wrong.

Script A now opens with hw-test-session finish, bgctl reset --yes,
bgctl stop --all, then bgctl list. The list is the point of the sequence:
it is the one line in the log that proves the DUT was idle at the start.

Script A -> V1.1.1.

Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_014RetWKFZFG1ZHcitQAyhwM

ARCHITECTURE.md

@@ -342,7 +342,7 @@ PROFILE_CHANNELS=( "0:high:8" "1:low:8" ... )   # "channel:operation:change_perc
 
 | 模組 | 進入點 | 功能 |
 |------|--------|------|
-| **Script A（Pre-test）** | `1_Blanton_Script_A.ttl` V1.0.7 | root 登入 → `date -s` 對時 → 清 job log → `hw-test-session start` → **設定風扇轉速** → **等資料面就緒**（`wait_init.ttl`）→ DUT 清單（boot/version/fwutil/syseeprom/ssdhealth/TPM/NVMe）→ BMC enroll + version/status → source bash 工具 → 清/讀 7 組 PCIe AER + `ras-mc-ctl --summary` → `lspci` → margin → PMON → dmesg → **10G/1G 管理網路 ping** → 100G uplink 設定與狀態 → **一輪流量基線** → `show uptime` |
+| **Script A（Pre-test）** | `1_Blanton_Script_A.ttl` V1.1.1 | root 登入 → `date -s` 對時 → 清 job log → **收掉前一輪殘留**（`hw-test-session finish` → `bgctl reset --yes` → `bgctl stop --all` → `bgctl list` 確認清空）→ `hw-test-session start` → **設定風扇轉速** → **等資料面就緒**（`wait_init.ttl`）→ DUT 清單（boot/version/fwutil/syseeprom/ssdhealth/TPM/NVMe）→ BMC enroll + version/status → source bash 工具 → 清/讀 7 組 PCIe AER + `ras-mc-ctl --summary` → `lspci` → margin → PMON → dmesg → **10G/1G 管理網路 ping** → 100G uplink 設定與狀態 → **一輪流量基線** → `show uptime` |
 | **Script B（Stress）** | `2_Blanton_Script_B.ttl` | `mlucas-avx2 -cpu 0:15` + `bgctl run` 的 `memtester` / SSD / USB 壓力 + BMC DDR（`bmc-manager run memtester`）→ BMC USB net test（探測 cdc_ncm 介面，`systemd-run` 掛 4 小時 ping）→ 啟動 mgmt ping 監控 → `jobs` / `bgctl list` → traffic（依 `SWB_UNIT`）→ `while 1` 每輪完整 PMON + margin |
 | **Script C（Post-test）** | `3_Blanton_Script_C.ttl` | `kill $(jobs -p)` + `bgctl stop --all` / `reset` + 停 BMC USB unit 與 mgmt ping → PMON + dmesg → 7 組 AER + `ras-mc-ctl` → BMC USB `journalctl` → `ip -s link show eth0/eth1` → `cat` mlucas log → traffic `stop` + `report` → **BER 掃描**（依 `SWB_UNIT`）→ NVMe 健康 → `show reboot-cause` / `uptime` → **job log 複製到 USB（帶時戳）** → `hw-test-session finish` |
 | **SWB loopback 流量** | `blanton_traffic_linespeed <sub> [-u 0\|1\|all]` | `init`（VLAN 30..137，成對 `cdN`/`cdN+32`）→ `clear` → `start`（`tx 100 length=512`）→ `stop` → `report`（per-pair TX/RX 交叉比對 PASS/FAIL）；另有 `ps`（link/speed）與 `run`（一條龍）。**V0.6.0 起含 100G uplink `ce0`**（VLAN 138）：它沒有 loopback 對象，靠 **ingress mirror 打回自己**維持循環，`report` 最後一列就是它，底下再接一份跨 unit summary |
@@ -378,6 +378,7 @@ Script A ── logopen Logs/Blanton_Margin_<ts>.log ──┐  (之後所有畫
     ├─ 登入 admin → sudo -i → root@sonic:~#         │
     ├─ date -s "<host 時間>"   ← 讓 DUT 時戳可對照
     ├─ rm /host/hw-eval/jobs/*   ← 清掉上一輪的 job log
+    ├─ hw-test-session finish / bgctl reset / stop --all / list   (收前一輪)
     ├─ hw-test-session start / log / status
     ├─ 風扇：max31790 unbind→sleep→bind（18-0020 與 25-0020 各一次）
     │        → fan-speed-control.sh <FAN_SPEED> → 回答 y 確認   │