Compare commits
3
Commits
| Author | SHA1 | Date | |
|---|---|---|---|
 etwen
|
9d61b1aa43 | ||
|
etwen
|
071244fde1 | ||
|
etwen
|
9bf4291d17 |
Binary file not shown.
@@ -7,7 +7,14 @@
|
||||
; Version History:
|
||||
; V1.0.0 2026-08-13 Initial Version
|
||||
; V1.0.1 2026-08-14 Add CLEAR PCIE Error
|
||||
; V1.0.2 2026-08-17 utils/setup_pmon.ttl add Leakage Status
|
||||
; V1.0.2 2026-08-17 utils/setup_pmon.ttl Add Leakage Status
|
||||
; utils/traffic_loopback_vlan_setting.ttl Created
|
||||
; utils/traffic_loopback_vlan_remove.ttl Created
|
||||
; utils/traffic_loopback_start.ttl Created
|
||||
; ScriptB Remove stress_hhmd, stress_pcie
|
||||
; Blanton_Script Add blanton_traffic_linespeed.sh
|
||||
; ScriptB/C Add Traffic Test
|
||||
;
|
||||
; =============================================================================
|
||||
include "config.ttl"
|
||||
|
||||
@@ -52,6 +59,8 @@ sendln "source ~/Blanton_Script/blanton_icb_vi2c.sh"
|
||||
wait prompt_sonic_root
|
||||
sendln "source ~/Blanton_Script/blanton_pwr_data.sh"
|
||||
wait prompt_sonic_root
|
||||
sendln "source ~/Blanton_Script/blanton_traffic_linespeed.sh"
|
||||
wait prompt_sonic_root
|
||||
sendln "source ~/Blanton_Script/LTC2980_Margin_Script/margin.sh"
|
||||
|
||||
; ========== CLEAR PCIE Error ==========
|
||||
|
||||
@@ -1,13 +1,5 @@
|
||||
; =============================================================================
|
||||
; Script B for Blanton
|
||||
; Version : V1.0.2
|
||||
; Date : 2026-08-17
|
||||
; Author : ETWen
|
||||
; =============================================================================
|
||||
; Version History:
|
||||
; V1.0.0 2026-08-13 Initial Version
|
||||
; V1.0.1 2026-08-14 Add AMD CPU STRESS TEST
|
||||
; V1.0.2 2026-08-17 utils/setup_pmon.ttl add Leakage Status
|
||||
; =============================================================================
|
||||
include "config.ttl"
|
||||
|
||||
@@ -40,18 +32,10 @@ sendln "python ~/hammer/tools/stress_mem.py &"
|
||||
wait prompt_sonic_root
|
||||
sendln "python ~/hammer/tools/stress_mem.py &"
|
||||
|
||||
; ========== I2C, LSB and PCIE read with unlimited loop ==========
|
||||
wait prompt_sonic_root
|
||||
sendln "python ~/hammer/tools/stress_hhmd.py &"
|
||||
|
||||
; ========== SSD read/write ==========
|
||||
wait prompt_sonic_root
|
||||
sendln "python ~/hammer/tools/stress_ssd.py &"
|
||||
|
||||
; ========== PCIe CPU <- PCIe -> ASIC by dumping portStatus ==========
|
||||
wait prompt_sonic_root
|
||||
sendln "python ~/hammer/tools/stress_pcie.py &"
|
||||
|
||||
; ========== USB read/write ==========
|
||||
wait prompt_sonic_root
|
||||
sendln "python ~/hammer/tools/stress_usb.py &"
|
||||
@@ -62,6 +46,21 @@ sendln "jobs"
|
||||
|
||||
; ========== Take one round of eye measurement on uplink ports ==========
|
||||
|
||||
; ========== Traffic START ==========
|
||||
wait prompt_sonic_root
|
||||
sendln "blanton_traffic_linespeed ps -u 0"
|
||||
wait prompt_sonic_root
|
||||
sendln "blanton_traffic_linespeed init -u 0"
|
||||
wait prompt_sonic_root
|
||||
sendln "blanton_traffic_linespeed clear -u 0"
|
||||
wait prompt_sonic_root
|
||||
pause 3
|
||||
sendln "blanton_traffic_linespeed show -u 0"
|
||||
wait prompt_sonic_root
|
||||
sendln "blanton_traffic_linespeed start -u 0"
|
||||
|
||||
|
||||
|
||||
; ========== Get data every 10mins ==========
|
||||
while 1
|
||||
include "utils/setup_pmon.ttl"
|
||||
|
||||
@@ -1,13 +1,5 @@
|
||||
; =============================================================================
|
||||
; Script C for Blanton
|
||||
; Version : V1.0.2
|
||||
; Date : 2026-08-17
|
||||
; Author : ETWen
|
||||
; =============================================================================
|
||||
; Version History:
|
||||
; V1.0.0 2026-08-13 Initial Version
|
||||
; V1.0.1 2026-08-14 Add Check PCIE error counters,CHECK Stress results
|
||||
; V1.0.2 2026-08-17 utils/setup_pmon.ttl add Leakage Status
|
||||
; =============================================================================
|
||||
include "config.ttl"
|
||||
|
||||
@@ -40,8 +32,10 @@ wait prompt_sonic_root
|
||||
sendln "cat ~/hammer/tools/log.stress_ssd"
|
||||
|
||||
; ========== CHECK Traffic counters ==========
|
||||
;wait prompt_sonic_root
|
||||
;sendln "command"
|
||||
wait prompt_sonic_root
|
||||
sendln "blanton_traffic_linespeed stop -u 0"
|
||||
wait prompt_sonic_root
|
||||
sendln "blanton_traffic_linespeed report -u 0"
|
||||
|
||||
|
||||
messagebox 'GOOD JOB! Test Case DONE' 'teraterm'
|
||||
@@ -17,10 +17,21 @@
|
||||
# V1.4.2 2026-08-10 Change: FUNCT0..3_RES BDF updated 0000:04:00.x -> 0000:03:00.x (current unit's enumeration).
|
||||
# V1.4.3 2026-08-12 Change: FUNCT0..3_RES BDF updated 0000:03:00.x -> 0000:05:00.x (current unit's enumeration).
|
||||
# V1.4.4 2026-08-12 Change: FUNCT0..3_RES BDF back to 0000:03:00.x for the DUT on COM36.
|
||||
# NOTE: this BDF is per-unit. Check with
|
||||
# lspci -Dnn | grep -i fpga or
|
||||
# ls -d /sys/bus/pci/devices/0000:*:00.3
|
||||
# and edit the four lines below if it differs.
|
||||
# V1.5.0 2026-08-17 Change: BDF is no longer hard-coded. FUNCT0..3_RES are now
|
||||
# auto-detected at source time by scanning sysfs for the HPE
|
||||
# vendor id (0x1590) with all four functions .0-.3 present,
|
||||
# falling back to `lspci -Dnn` name/id match, then to
|
||||
# FPGA_BDF_FALLBACK. No more editing this file per DUT.
|
||||
# Add: fpga_rescan (re-detect after DUT swap / re-enumeration),
|
||||
# FPGA_BDF / FPGA_VENDOR_ID / FPGA_LSPCI_MATCH overrides,
|
||||
# FPGA_BDF_ACTIVE reporting the BDF in use.
|
||||
# Note: detection runs ONCE at source time (one INFO line on
|
||||
# stdout, WARN/FAIL on stderr). FPGA_QUIET=1 silences the
|
||||
# INFO line. cb_fpga/pmc/icb/swb never re-scan, so there is
|
||||
# no per-command output and no per-command overhead.
|
||||
# NOTE: the old per-unit NOTE ("edit the four lines below")
|
||||
# no longer applies - detection handles it. To pin a BDF
|
||||
# manually: FPGA_BDF=0000:05:00 fpga_rescan
|
||||
# =============================================================================
|
||||
#
|
||||
# SONiC hardware has no memtool / devmem, but it has pcimem. pcimem mmaps the PCI
|
||||
@@ -42,26 +53,112 @@
|
||||
# icb_fpga <addr> [data]
|
||||
# swb0_fpga <addr> [data]
|
||||
# swb1_fpga <addr> [data]
|
||||
# fpga_rescan re-detect the CB FPGA BDF (after a DUT swap)
|
||||
#
|
||||
# data present = write, absent = read.
|
||||
# Usage: source blanton_fpga_pcimem.sh
|
||||
|
||||
# === CB FPGA PCIe resource file (sysfs) ===
|
||||
# Use lspci -D to find the BDF (domain:bus:dev.fn); resource0 is the sysfs mapping of BAR0.
|
||||
# e.g. lspci -Dnn | grep -i fpga -> 0000:02:00.0 ...
|
||||
# memtool variant fills in the BAR value; pcimem variant fills in the resource file
|
||||
# path instead (offset becomes relative to BAR).
|
||||
FUNCT0_RES=/sys/bus/pci/devices/0000:03:00.0/resource0
|
||||
FUNCT1_RES=/sys/bus/pci/devices/0000:03:00.1/resource0
|
||||
FUNCT2_RES=/sys/bus/pci/devices/0000:03:00.2/resource0
|
||||
FUNCT3_RES=/sys/bus/pci/devices/0000:03:00.3/resource0
|
||||
# === CB FPGA PCIe resource file (sysfs) - AUTO-DETECTED ===
|
||||
# The CB FPGA's BDF (domain:bus:dev.fn) changes per unit / per enumeration, so it is
|
||||
# detected at source time instead of being hard-coded. resource0 is the sysfs mapping
|
||||
# of BAR0. (memtool variant fills in the BAR value; pcimem variant fills in the
|
||||
# resource file path instead, so offsets become relative to BAR.)
|
||||
#
|
||||
# Detection order:
|
||||
# 1. FPGA_BDF override e.g. FPGA_BDF=0000:05:00 (domain:bus:dev, WITHOUT .fn)
|
||||
# 2. sysfs vendor scan /sys/bus/pci/devices/*.0 whose vendor == FPGA_VENDOR_ID
|
||||
# (0x1590 = Hewlett Packard Enterprise) and that has all
|
||||
# four functions .0 .1 .2 .3 exposing resource0
|
||||
# 3. lspci -Dnn fallback lines matching FPGA_LSPCI_MATCH
|
||||
# ("Hewlett Packard Enterprise" or vendor id "[1590:")
|
||||
# 4. FPGA_BDF_FALLBACK last-known BDF, only if 1-3 all fail
|
||||
#
|
||||
# Overrides (export before sourcing, or set and call fpga_rescan afterwards):
|
||||
# FPGA_BDF=0000:05:00 pin a specific device, skip detection
|
||||
# FPGA_VENDOR_ID=0x10ee different vendor (e.g. a Xilinx-branded board)
|
||||
# FPGA_LSPCI_MATCH='...' custom lspci grep -iE pattern
|
||||
FPGA_VENDOR_ID="${FPGA_VENDOR_ID:-0x1590}"
|
||||
FPGA_LSPCI_MATCH="${FPGA_LSPCI_MATCH:-Hewlett Packard Enterprise|\[1590:}"
|
||||
FPGA_BDF_FALLBACK="${FPGA_BDF_FALLBACK:-0000:03:00}"
|
||||
|
||||
# Auto-detect example (uncomment to use; needs the FPGA's BDF prefix):
|
||||
# _BDF=0000:02:00
|
||||
# FUNCT0_RES=/sys/bus/pci/devices/${_BDF}.0/resource0
|
||||
# FUNCT1_RES=/sys/bus/pci/devices/${_BDF}.1/resource0
|
||||
# FUNCT2_RES=/sys/bus/pci/devices/${_BDF}.2/resource0
|
||||
# FUNCT3_RES=/sys/bus/pci/devices/${_BDF}.3/resource0
|
||||
# True if all four functions of <bdf> exist and expose resource0.
|
||||
# Usage: _fpga_bdf_ok <domain:bus:dev>
|
||||
_fpga_bdf_ok() {
|
||||
local bdf="$1" fn
|
||||
for fn in 0 1 2 3; do
|
||||
[ -e "/sys/bus/pci/devices/${bdf}.${fn}/resource0" ] || return 1
|
||||
done
|
||||
return 0
|
||||
}
|
||||
|
||||
# Print the detected FPGA BDF prefix (domain:bus:dev) on stdout; non-zero if none.
|
||||
_fpga_detect_bdf() {
|
||||
local cands="" bdf dir vend want
|
||||
|
||||
# 1. explicit override wins (tolerate a trailing ".fn" being included)
|
||||
if [ -n "${FPGA_BDF:-}" ]; then
|
||||
bdf="$FPGA_BDF"
|
||||
case "$bdf" in *.[0-7]) bdf="${bdf%.*}" ;; esac
|
||||
echo "$bdf"
|
||||
return 0
|
||||
fi
|
||||
|
||||
want=$(echo "$FPGA_VENDOR_ID" | tr 'A-Z' 'a-z')
|
||||
|
||||
# 2. sysfs vendor-ID scan (no lspci / pci.ids needed)
|
||||
for dir in /sys/bus/pci/devices/*:*.0; do
|
||||
[ -e "$dir/vendor" ] || continue
|
||||
vend=$(tr 'A-Z' 'a-z' < "$dir/vendor" 2>/dev/null)
|
||||
[ "$vend" = "$want" ] || continue
|
||||
bdf="${dir##*/}"; bdf="${bdf%.0}"
|
||||
_fpga_bdf_ok "$bdf" && cands="$cands $bdf"
|
||||
done
|
||||
|
||||
# 3. lspci fallback (device name match, in case the vendor id differs)
|
||||
if [ -z "$cands" ] && command -v lspci >/dev/null 2>&1; then
|
||||
for bdf in $(lspci -Dnn 2>/dev/null | grep -iE "$FPGA_LSPCI_MATCH" \
|
||||
| awk '{print $1}' | sed 's/\.[0-9a-f]*$//' | sort -u); do
|
||||
_fpga_bdf_ok "$bdf" && cands="$cands $bdf"
|
||||
done
|
||||
fi
|
||||
|
||||
set -- $cands
|
||||
[ $# -eq 0 ] && return 1
|
||||
if [ $# -gt 1 ]; then
|
||||
echo -e "[\033[33mWARN\033[0m] multiple candidate FPGAs found:$cands -> using $1" >&2
|
||||
echo -e " set FPGA_BDF=<domain:bus:dev> and run fpga_rescan to pick another." >&2
|
||||
fi
|
||||
echo "$1"
|
||||
}
|
||||
|
||||
# (Re)detect the FPGA BDF and refresh FUNCT0..3_RES. Called once at source time;
|
||||
# call again by hand after swapping/re-enumerating a DUT.
|
||||
# The one-line INFO goes to STDOUT (so wrappers that already do
|
||||
# `source ... >/dev/null` stay silent); WARN/FAIL go to STDERR.
|
||||
# Set FPGA_QUIET=1 to suppress the INFO line entirely.
|
||||
fpga_rescan() {
|
||||
local bdf
|
||||
bdf=$(_fpga_detect_bdf)
|
||||
if [ -z "$bdf" ]; then
|
||||
bdf="$FPGA_BDF_FALLBACK"
|
||||
echo -e "[\033[33mWARN\033[0m] no FPGA found (vendor $FPGA_VENDOR_ID / '$FPGA_LSPCI_MATCH');" >&2
|
||||
echo -e " falling back to $bdf. Check with: lspci -Dnn | grep -iE 'Hewlett|fpga'" >&2
|
||||
fi
|
||||
FPGA_BDF_ACTIVE="$bdf"
|
||||
FUNCT0_RES=/sys/bus/pci/devices/${bdf}.0/resource0
|
||||
FUNCT1_RES=/sys/bus/pci/devices/${bdf}.1/resource0
|
||||
FUNCT2_RES=/sys/bus/pci/devices/${bdf}.2/resource0
|
||||
FUNCT3_RES=/sys/bus/pci/devices/${bdf}.3/resource0
|
||||
if _fpga_bdf_ok "$bdf"; then
|
||||
[ "${FPGA_QUIET:-0}" = "1" ] || \
|
||||
echo -e "[\033[34mINFO\033[0m] CB FPGA BDF = \033[36m${bdf}.0-.3\033[0m (resource0)"
|
||||
else
|
||||
echo -e "[\033[31mFAIL\033[0m] ${bdf}.0-.3 resource0 not all present - register access will fail." >&2
|
||||
return 1
|
||||
fi
|
||||
}
|
||||
|
||||
fpga_rescan
|
||||
|
||||
# === VSPI window base offset (relative to CB Function 2 resource0 start) ===
|
||||
# NOTE: CB.F2 has TWO near-identical VSPI register blocks (see spec register map):
|
||||
@@ -268,6 +365,9 @@ blanton_fpga_help() {
|
||||
echo -e " \033[33mswb0_fpga\033[0m <addr> [data] SWB0 FPGA via VSPI"
|
||||
echo -e " \033[33mswb1_fpga\033[0m <addr> [data] SWB1 FPGA via VSPI"
|
||||
echo -e " \033[33mfpga_debug\033[0m on|off Toggle debug mode (print commands and execute)"
|
||||
echo -e " \033[33mfpga_rescan\033[0m Re-detect CB FPGA BDF (after DUT swap / re-enum)"
|
||||
echo ""
|
||||
echo -e " Active CB FPGA BDF: \033[36m${FPGA_BDF_ACTIVE:-unknown}\033[0m .0-.3 (pin with: FPGA_BDF=0000:05:00 fpga_rescan)"
|
||||
echo ""
|
||||
echo -e " Omit [data] to \033[32mread\033[0m, provide [data] to \033[31mwrite\033[0m."
|
||||
echo -e " Backend: \033[36mpcimem\033[0m (sysfs resource file + relative offset)."
|
||||
|
||||
@@ -0,0 +1,729 @@
|
||||
#!/usr/bin/env bash
|
||||
# =============================================================================
|
||||
# blanton_traffic_linespeed.sh -- SWB loopback line-speed traffic via bcmcmd
|
||||
# =============================================================================
|
||||
# Version History:
|
||||
# V0.1.0 2026-08-17 First version. Bash port of the three Tera Term macros
|
||||
# utils/traffic_loopback_vlan_setting.ttl (VLAN 30..137,
|
||||
# port pair cdN <-> cdN+32), utils/traffic_loopback_start.ttl
|
||||
# (tx 100 length=512 VLantag=<vid>) and
|
||||
# utils/traffic_loopback_vlan_remove.ttl.
|
||||
# One DUT = two switch boards -> bcmcmd unit 0 and 1
|
||||
# (bcmcmd -n <unit>), default both.
|
||||
# V0.2.0 2026-08-17 Add: 'ps' (port status) subcommand -- 'ps <portlist>' with
|
||||
# the cabled-port list as default ($TL_PS_PORTS), -p/--ports
|
||||
# to override (or a bare port list after 'ps'), 'ps -p all'
|
||||
# for every port. 'run' now shows port status first.
|
||||
# V0.3.0 2026-08-17 Add: 'report' subcommand -- runs 'show c', keeps the raw
|
||||
# log, and renders the MIB_TPOK/MIB_RPOK counters as a
|
||||
# loopback-pair table with a PASS/FAIL cross-check
|
||||
# (cdA.TX==cdB.RX and cdA.RX==cdB.TX), i.e. an on-DUT awk
|
||||
# port of tools/bcm_mibpair_report_V1.1.0.py (same layout,
|
||||
# same verdict rules, same summary lines, exit 2 on
|
||||
# FAIL/NA). Options -T/-a/-g/-P/-q/--tsv/--raw and
|
||||
# -f <log> to re-parse a captured console log offline.
|
||||
# 'run' now ends with 'report' instead of a raw 'show c'.
|
||||
# V0.3.1 2026-08-17 Fix: only the FIRST VLAN was configured -- bcmcmd inherited
|
||||
# the while-loop's stdin (the pair-list here-string) and ate
|
||||
# the remaining lines, so 'read' hit EOF after one pass.
|
||||
# bcmcmd now always runs with </dev/null and the loops read
|
||||
# on fd 3 (3<<< "$TL_PAIRS").
|
||||
# Fix: bcmcmd exits 0 even when the BCM shell rejects the
|
||||
# command ("VLAN: ERROR: Entry exists" / "Failed to execute
|
||||
# the diagnostic command"), so failures were counted as OK.
|
||||
# Output is now pattern-matched ($TL_ERR_PAT), with benign
|
||||
# cases tolerated and counted separately: 'Entry exists' on
|
||||
# 'vlan create' (re-run of init) and 'not found' on
|
||||
# 'vlan remove/destroy' (stop before init).
|
||||
# V0.3.2 2026-08-17 Add: report colours the verdict -- PASS green, FAIL red,
|
||||
# NA yellow (also in the summary lines). Padding is applied
|
||||
# to the plain text before colouring so the columns stay
|
||||
# aligned. Auto-disabled when stdout is not a terminal or
|
||||
# with --tsv; --color / --no-color / TL_COLOR force it.
|
||||
# =============================================================================
|
||||
#
|
||||
# The VLAN/port table below is copied verbatim from
|
||||
# utils/traffic_loopback_vlan_setting.ttl -- it is NOT generated, because the
|
||||
# port map has gaps (cd15..19, cd47..51, cd79..83, cd111..115, cd139,
|
||||
# cd148..151, cd171, cd180..183, cd203, cd212..215, cd235, cd244..247 are not
|
||||
# cabled). Keep this file and the .ttl in sync if the loopback harness changes.
|
||||
#
|
||||
# Usage (run directly):
|
||||
# ./blanton_traffic_linespeed.sh init # step 1: VLAN loopback setup
|
||||
# ./blanton_traffic_linespeed.sh clear # step 2: clear c
|
||||
# ./blanton_traffic_linespeed.sh show # step 3/6: show c
|
||||
# ./blanton_traffic_linespeed.sh start # step 4: tx burst per VLAN
|
||||
# ./blanton_traffic_linespeed.sh stop # step 5: remove VLAN members
|
||||
# ./blanton_traffic_linespeed.sh ps # port status (link/speed) of
|
||||
# # the cabled ports
|
||||
# ./blanton_traffic_linespeed.sh report # step 6+: show c -> per-pair
|
||||
# # TX/RX table + PASS/FAIL
|
||||
# ./blanton_traffic_linespeed.sh run # ps -> 1 -> 2 -> 4 -> report
|
||||
#
|
||||
# Usage (sourced, like the other blanton_*.sh tools):
|
||||
# source blanton_traffic_linespeed.sh
|
||||
# blanton_traffic_linespeed init -u 1 -d
|
||||
#
|
||||
# Options (any order, after the subcommand):
|
||||
# -u|--unit <0|1|all|0,1> bcmcmd unit(s). Default: $TL_UNITS ("0 1")
|
||||
# -c|--count <n> tx packet count (default $TL_TX_COUNT)
|
||||
# -l|--length <n> tx packet length (default $TL_TX_LENGTH)
|
||||
# -p|--ports <list|all> ps: port list ('all' = plain 'ps', every port)
|
||||
# -T|--tolerance <n> report: allowed |delta| in packets (default 0;
|
||||
# -T 1 absorbs the normal snapshot skew)
|
||||
# -a|--all report: also list pairs that have no counters
|
||||
# -g|--grouped report: comma-group the values (1,234,567)
|
||||
# -P|--with-port report: render cd1(2) instead of cd1
|
||||
# -q|--quiet report: drop the trailing summary comments
|
||||
# --tsv report: tab-separated (paste into Excel)
|
||||
# --raw report: also print the raw 'show c' output
|
||||
# --color|--no-color report: force / disable PASS-green FAIL-red colours
|
||||
# (default: colour only when stdout is a terminal)
|
||||
# -f|--file <log> report: parse a saved console log, do not touch DUT
|
||||
# -d|--debug print every bcmcmd before running it
|
||||
# -n|--dry-run print commands only, do not touch the DUT
|
||||
# --destroy stop: also 'vlan destroy <vid>' after removing members
|
||||
# -h|--help help
|
||||
#
|
||||
# Environment overrides:
|
||||
# BCMCMD_CMD=bcmcmd TL_UNITS="0 1" TL_TX_COUNT=100 TL_TX_LENGTH=512
|
||||
# TL_PS_PORTS="1-24,40-96,..." TL_TOLERANCE=0 TL_LOG_DIR=/tmp
|
||||
# DEBUG_MODE=1
|
||||
#
|
||||
# Related: tools/bcm_mibpair_report_V1.1.0.py -- same report off-box (python3,
|
||||
# richer options). 'report' is the awk equivalent so it runs on the SONiC DUT
|
||||
# itself; both accept the same captured 'show c' log.
|
||||
# =============================================================================
|
||||
|
||||
# === Config ==================================================================
|
||||
BCMCMD_CMD="${BCMCMD_CMD:-bcmcmd}"
|
||||
TL_UNITS="${TL_UNITS:-0 1}" # one DUT = two switch boards (0 and 1)
|
||||
TL_TX_COUNT="${TL_TX_COUNT:-100}"
|
||||
TL_TX_LENGTH="${TL_TX_LENGTH:-512}"
|
||||
TL_DEFAULT_VLAN="${TL_DEFAULT_VLAN:-1}"
|
||||
TL_DEFAULT_VLAN_PBM="${TL_DEFAULT_VLAN_PBM:-cd}"
|
||||
|
||||
# 'ps' port list: the cabled ports of the loopback harness, in bcm logical-port
|
||||
# numbering (NOT the cdN names used by vlan add). Kept as one string so it can be
|
||||
# pasted straight from/into a manual "bcmcmd -n 0 -c 'ps <list>'".
|
||||
TL_PS_PORTS="${TL_PS_PORTS:-1-24,40-96,112-168,184-240,256-259,270-308,310-327,342-380,382-399,414-452,454-471,486-524,526-543,558-565}"
|
||||
|
||||
# --- report (pair cross-check) defaults -------------------------------------
|
||||
TL_TOLERANCE="${TL_TOLERANCE:-0}" # allowed |delta| in packets before FAIL
|
||||
TL_LOG_DIR="${TL_LOG_DIR:-/tmp}" # where the raw 'show c' capture is kept
|
||||
TL_REPORT_ALL=${TL_REPORT_ALL:-0}
|
||||
TL_REPORT_GROUPED=${TL_REPORT_GROUPED:-0}
|
||||
TL_REPORT_WITHPORT=${TL_REPORT_WITHPORT:-0}
|
||||
TL_REPORT_QUIET=${TL_REPORT_QUIET:-0}
|
||||
TL_REPORT_TSV=${TL_REPORT_TSV:-0}
|
||||
TL_REPORT_RAW=${TL_REPORT_RAW:-0}
|
||||
TL_REPORT_FILE="" # -f <log>: parse this instead of the DUT
|
||||
TL_COLOR="${TL_COLOR:-auto}" # auto|always|never -- PASS green / FAIL red / NA yellow
|
||||
|
||||
# Debug / dry-run (1 = on). DEBUG_MODE is shared with blanton_fpga_pcimem.sh.
|
||||
DEBUG_MODE=${DEBUG_MODE:-0}
|
||||
TL_DRY_RUN=${TL_DRY_RUN:-0}
|
||||
TL_DESTROY=${TL_DESTROY:-0}
|
||||
|
||||
# === VLAN <-> loopback port pair table (from traffic_loopback_vlan_setting.ttl) ==
|
||||
# format: <vid> <port_a> <port_b>
|
||||
TL_PAIRS="\
|
||||
30 cd0 cd32
|
||||
31 cd1 cd33
|
||||
32 cd2 cd34
|
||||
33 cd3 cd35
|
||||
34 cd4 cd36
|
||||
35 cd5 cd37
|
||||
36 cd6 cd38
|
||||
37 cd7 cd39
|
||||
38 cd8 cd40
|
||||
39 cd9 cd41
|
||||
40 cd10 cd42
|
||||
41 cd11 cd43
|
||||
42 cd12 cd44
|
||||
43 cd13 cd45
|
||||
44 cd14 cd46
|
||||
45 cd20 cd52
|
||||
46 cd21 cd53
|
||||
47 cd22 cd54
|
||||
48 cd23 cd55
|
||||
49 cd24 cd56
|
||||
50 cd25 cd57
|
||||
51 cd26 cd58
|
||||
52 cd27 cd59
|
||||
53 cd28 cd60
|
||||
54 cd29 cd61
|
||||
55 cd30 cd62
|
||||
56 cd31 cd63
|
||||
57 cd64 cd96
|
||||
58 cd65 cd97
|
||||
59 cd66 cd98
|
||||
60 cd67 cd99
|
||||
61 cd68 cd100
|
||||
62 cd69 cd101
|
||||
63 cd70 cd102
|
||||
64 cd71 cd103
|
||||
65 cd72 cd104
|
||||
66 cd73 cd105
|
||||
67 cd74 cd106
|
||||
68 cd75 cd107
|
||||
69 cd76 cd108
|
||||
70 cd77 cd109
|
||||
71 cd78 cd110
|
||||
72 cd84 cd116
|
||||
73 cd85 cd117
|
||||
74 cd86 cd118
|
||||
75 cd87 cd119
|
||||
76 cd88 cd120
|
||||
77 cd89 cd121
|
||||
78 cd90 cd122
|
||||
79 cd91 cd123
|
||||
80 cd92 cd124
|
||||
81 cd93 cd125
|
||||
82 cd94 cd126
|
||||
83 cd95 cd127
|
||||
84 cd128 cd160
|
||||
85 cd129 cd161
|
||||
86 cd130 cd162
|
||||
87 cd131 cd163
|
||||
88 cd132 cd164
|
||||
89 cd133 cd165
|
||||
90 cd134 cd166
|
||||
91 cd135 cd167
|
||||
92 cd136 cd168
|
||||
93 cd137 cd169
|
||||
94 cd138 cd170
|
||||
95 cd140 cd172
|
||||
96 cd141 cd173
|
||||
97 cd142 cd174
|
||||
98 cd143 cd175
|
||||
99 cd144 cd176
|
||||
100 cd145 cd177
|
||||
101 cd146 cd178
|
||||
102 cd147 cd179
|
||||
103 cd152 cd184
|
||||
104 cd153 cd185
|
||||
105 cd154 cd186
|
||||
106 cd155 cd187
|
||||
107 cd156 cd188
|
||||
108 cd157 cd189
|
||||
109 cd158 cd190
|
||||
110 cd159 cd191
|
||||
111 cd192 cd224
|
||||
112 cd193 cd225
|
||||
113 cd194 cd226
|
||||
114 cd195 cd227
|
||||
115 cd196 cd228
|
||||
116 cd197 cd229
|
||||
117 cd198 cd230
|
||||
118 cd199 cd231
|
||||
119 cd200 cd232
|
||||
120 cd201 cd233
|
||||
121 cd202 cd234
|
||||
122 cd204 cd236
|
||||
123 cd205 cd237
|
||||
124 cd206 cd238
|
||||
125 cd207 cd239
|
||||
126 cd208 cd240
|
||||
127 cd209 cd241
|
||||
128 cd210 cd242
|
||||
129 cd211 cd243
|
||||
130 cd216 cd248
|
||||
131 cd217 cd249
|
||||
132 cd218 cd250
|
||||
133 cd219 cd251
|
||||
134 cd220 cd252
|
||||
135 cd221 cd253
|
||||
136 cd222 cd254
|
||||
137 cd223 cd255"
|
||||
|
||||
# === Logging =================================================================
|
||||
_tl_info() { echo -e "[\033[34mINFO\033[0m] $*"; }
|
||||
_tl_ok() { echo -e "[\033[32m OK \033[0m] $*"; }
|
||||
_tl_warn() { echo -e "[\033[33mWARN\033[0m] $*" >&2; }
|
||||
_tl_err() { echo -e "[\033[31mERR \033[0m] $*" >&2; }
|
||||
_tl_dbg() { [ "$DEBUG_MODE" = "1" ] && echo -e "\033[90m[DEBG] $*\033[0m" >&2; return 0; }
|
||||
|
||||
traffic_debug() {
|
||||
if [ "${1:-}" = "on" ]; then DEBUG_MODE=1
|
||||
elif [ "${1:-}" = "off" ]; then DEBUG_MODE=0
|
||||
else [ "$DEBUG_MODE" = "0" ] && DEBUG_MODE=1 || DEBUG_MODE=0; fi
|
||||
_tl_info "DEBUG_MODE=$DEBUG_MODE"
|
||||
}
|
||||
|
||||
# === bcmcmd wrapper ==========================================================
|
||||
# IMPORTANT: bcmcmd is always run with stdin closed (</dev/null). Without it
|
||||
# bcmcmd inherits the caller's stdin and eats the rest of the pair list that the
|
||||
# while-loops read, so only the first VLAN got configured (fixed in V0.3.1).
|
||||
#
|
||||
# _tl_bcm <unit> <bcm shell command> -- streams the DUT output, returns bcmcmd rc
|
||||
# Debug mode prints the full command line first; dry-run prints and skips it.
|
||||
_tl_bcm() {
|
||||
local unit="$1"; shift
|
||||
local cmd="$*"
|
||||
_tl_dbg "$BCMCMD_CMD -n $unit -c '$cmd'"
|
||||
if [ "$TL_DRY_RUN" = "1" ]; then
|
||||
echo "[DRY ] $BCMCMD_CMD -n $unit -c '$cmd'"
|
||||
return 0
|
||||
fi
|
||||
"$BCMCMD_CMD" -n "$unit" -c "$cmd" </dev/null
|
||||
}
|
||||
|
||||
# bcmcmd exits 0 even when the BCM shell itself refused the command
|
||||
# ("VLAN: ERROR: Entry exists", "Failed to execute the diagnostic command"),
|
||||
# so the captured output has to be pattern-matched as well.
|
||||
TL_ERR_PAT="${TL_ERR_PAT:-ERROR|Failed to execute|Invalid|Syntax error|Unavailable|not found}"
|
||||
TL_BENIGN_CREATE="${TL_BENIGN_CREATE:-Entry exists|already exist}"
|
||||
TL_BENIGN_REMOVE="${TL_BENIGN_REMOVE:-Entry not found|not found|does not exist|no such}"
|
||||
|
||||
# _tl_bcm_run <unit> <benign_regex|""> <cmd...>
|
||||
# 0 = ok, 2 = failed but benign (matches benign_regex), 1 = real failure
|
||||
# Output is captured (shown in debug mode, or on a real failure) so the ~110
|
||||
# vlan create/add lines do not flood the console.
|
||||
_tl_bcm_run() {
|
||||
local unit="$1" benign="$2"; shift 2
|
||||
local cmd="$*" out rc
|
||||
if [ "$TL_DRY_RUN" = "1" ]; then _tl_bcm "$unit" "$cmd" >/dev/null; return 0; fi
|
||||
_tl_dbg "$BCMCMD_CMD -n $unit -c '$cmd'"
|
||||
out=$("$BCMCMD_CMD" -n "$unit" -c "$cmd" </dev/null 2>&1); rc=$?
|
||||
[ "$DEBUG_MODE" = "1" ] && [ -n "$out" ] && echo "$out"
|
||||
if [ "$rc" -ne 0 ] || echo "$out" | grep -qiE "$TL_ERR_PAT"; then
|
||||
if [ -n "$benign" ] && echo "$out" | grep -qiE "$benign"; then
|
||||
_tl_dbg "benign: unit $unit '$cmd'"
|
||||
return 2
|
||||
fi
|
||||
_tl_err "unit $unit: '$cmd' rc=$rc"
|
||||
[ "$DEBUG_MODE" != "1" ] && [ -n "$out" ] && echo "$out" >&2
|
||||
return 1
|
||||
fi
|
||||
return 0
|
||||
}
|
||||
|
||||
# _tl_bcm_q <unit> <cmd> -- _tl_bcm_run with no benign pattern
|
||||
_tl_bcm_q() { local unit="$1"; shift; _tl_bcm_run "$unit" "" "$@"; }
|
||||
|
||||
_tl_units_check() {
|
||||
local u
|
||||
for u in $TL_UNITS; do
|
||||
case "$u" in
|
||||
0|1) ;;
|
||||
*) _tl_err "invalid unit '$u' (expect 0 or 1)"; return 1 ;;
|
||||
esac
|
||||
done
|
||||
if [ "$TL_DRY_RUN" != "1" ] && ! command -v "$BCMCMD_CMD" >/dev/null 2>&1; then
|
||||
_tl_err "$BCMCMD_CMD not found in PATH (run on the SONiC DUT, or set BCMCMD_CMD)"
|
||||
return 1
|
||||
fi
|
||||
return 0
|
||||
}
|
||||
|
||||
_tl_pair_count() { echo "$TL_PAIRS" | grep -c . ; }
|
||||
|
||||
# === Step 1: VLAN loopback setup (traffic_loopback_vlan_setting.ttl) =========
|
||||
traffic_linespeed_init() {
|
||||
_tl_units_check || return 1
|
||||
local unit vid pa pb n fail exist rc
|
||||
for unit in $TL_UNITS; do
|
||||
n=0; fail=0; exist=0
|
||||
_tl_info "unit $unit: VLAN loopback setup ($(_tl_pair_count) pairs, VLAN 30..137)"
|
||||
_tl_bcm_q "$unit" "vlan remove $TL_DEFAULT_VLAN pbm=$TL_DEFAULT_VLAN_PBM" \
|
||||
|| _tl_warn "unit $unit: clearing default VLAN $TL_DEFAULT_VLAN membership failed (continuing)"
|
||||
# read on fd 3: bcmcmd must not be able to consume the pair list
|
||||
while read -r vid pa pb <&3; do
|
||||
[ -z "$vid" ] && continue
|
||||
_tl_bcm_run "$unit" "$TL_BENIGN_CREATE" "vlan create $vid"; rc=$?
|
||||
[ "$rc" = "1" ] && fail=$((fail+1))
|
||||
[ "$rc" = "2" ] && exist=$((exist+1))
|
||||
_tl_bcm_q "$unit" "vlan add $vid pbm=$pa,$pb" || fail=$((fail+1))
|
||||
n=$((n+1))
|
||||
done 3<<< "$TL_PAIRS"
|
||||
if [ "$fail" -eq 0 ]; then
|
||||
_tl_ok "unit $unit: $n VLANs configured$([ "$exist" -gt 0 ] && echo " ($exist already existed)"), port pairs added"
|
||||
else
|
||||
_tl_warn "unit $unit: $n VLANs processed, $fail command(s) failed$([ "$exist" -gt 0 ] && echo ", $exist already existed")"
|
||||
fi
|
||||
done
|
||||
}
|
||||
|
||||
# === Step 2: clear counters ==================================================
|
||||
traffic_linespeed_clear() {
|
||||
_tl_units_check || return 1
|
||||
local unit
|
||||
for unit in $TL_UNITS; do
|
||||
_tl_info "unit $unit: clear c"
|
||||
_tl_bcm "$unit" "clear c" || { _tl_err "unit $unit: clear c failed"; return 1; }
|
||||
_tl_ok "unit $unit: counters cleared"
|
||||
done
|
||||
}
|
||||
|
||||
# === Step 3 / 6: show counters ==============================================
|
||||
traffic_linespeed_show() {
|
||||
_tl_units_check || return 1
|
||||
local unit
|
||||
for unit in $TL_UNITS; do
|
||||
echo "----- unit $unit : show c -----"
|
||||
_tl_bcm "$unit" "show c" || { _tl_err "unit $unit: show c failed"; return 1; }
|
||||
done
|
||||
}
|
||||
|
||||
# === Step 4: start traffic (traffic_loopback_start.ttl) =====================
|
||||
traffic_linespeed_start() {
|
||||
_tl_units_check || return 1
|
||||
local unit vid pa pb n fail
|
||||
for unit in $TL_UNITS; do
|
||||
n=0; fail=0
|
||||
_tl_info "unit $unit: tx $TL_TX_COUNT length=$TL_TX_LENGTH per VLAN 30..137"
|
||||
while read -r vid pa pb <&3; do
|
||||
[ -z "$vid" ] && continue
|
||||
_tl_bcm_q "$unit" "tx $TL_TX_COUNT length=$TL_TX_LENGTH VLantag=$vid" || fail=$((fail+1))
|
||||
n=$((n+1))
|
||||
done 3<<< "$TL_PAIRS"
|
||||
if [ "$fail" -eq 0 ]; then
|
||||
_tl_ok "unit $unit: $n bursts sent ($((n * TL_TX_COUNT)) packets, ${TL_TX_LENGTH}B each)"
|
||||
else
|
||||
_tl_warn "unit $unit: $n bursts attempted, $fail failed"
|
||||
fi
|
||||
done
|
||||
}
|
||||
|
||||
# === Step 5: stop traffic (traffic_loopback_vlan_remove.ttl) ================
|
||||
traffic_linespeed_stop() {
|
||||
_tl_units_check || return 1
|
||||
local unit vid pa pb n fail
|
||||
for unit in $TL_UNITS; do
|
||||
n=0; fail=0
|
||||
_tl_info "unit $unit: removing loopback port pairs from VLAN 30..137"
|
||||
while read -r vid pa pb <&3; do
|
||||
[ -z "$vid" ] && continue
|
||||
_tl_bcm_run "$unit" "$TL_BENIGN_REMOVE" "vlan remove $vid pbm=$pa,$pb"
|
||||
[ "$?" = "1" ] && fail=$((fail+1))
|
||||
if [ "$TL_DESTROY" = "1" ]; then
|
||||
_tl_bcm_run "$unit" "$TL_BENIGN_REMOVE" "vlan destroy $vid"
|
||||
[ "$?" = "1" ] && fail=$((fail+1))
|
||||
fi
|
||||
n=$((n+1))
|
||||
done 3<<< "$TL_PAIRS"
|
||||
if [ "$fail" -eq 0 ]; then
|
||||
_tl_ok "unit $unit: $n VLANs cleaned$([ "$TL_DESTROY" = "1" ] && echo " and destroyed")"
|
||||
else
|
||||
_tl_warn "unit $unit: $n VLANs processed, $fail command(s) failed"
|
||||
fi
|
||||
done
|
||||
}
|
||||
|
||||
# === Port status: ps <portlist> =============================================
|
||||
# 'ps' shows link / speed / duplex / flow-control per port. Default list is the
|
||||
# cabled ports ($TL_PS_PORTS); 'all' (or empty) runs a bare 'ps' = every port.
|
||||
traffic_linespeed_ps() {
|
||||
_tl_units_check || return 1
|
||||
local unit cmd="ps"
|
||||
case "${TL_PS_PORTS:-all}" in
|
||||
all|ALL|"") cmd="ps" ;;
|
||||
*) cmd="ps $TL_PS_PORTS" ;;
|
||||
esac
|
||||
for unit in $TL_UNITS; do
|
||||
echo "----- unit $unit : $cmd -----"
|
||||
_tl_bcm "$unit" "$cmd" || { _tl_err "unit $unit: $cmd failed"; return 1; }
|
||||
done
|
||||
}
|
||||
|
||||
# === Report: show c -> per-pair TX/RX table + PASS/FAIL =====================
|
||||
# Mirrors tools/bcm_mibpair_report_V1.1.0.py, in awk so it runs on the DUT.
|
||||
#
|
||||
# Parses MIB_TPOK.cd1(2) : 723,629,081,133 +723,629,081,133
|
||||
# MIB_RPOK.cd1(2) : 581,693,309,458 +581,693,309,458
|
||||
# Verdict per pair: cdA.TPOK == cdB.RPOK and cdA.RPOK == cdB.TPOK
|
||||
# PASS within tolerance / FAIL outside / NA when counters are missing
|
||||
# (a cd port absent from 'show c' means the counter is zero or the
|
||||
# console scrolled -- cross-check with 'ps' before blaming the port).
|
||||
# _tl_pair_report <logfile> -> 0 all PASS, 2 any FAIL/NA, 1 parse error
|
||||
_tl_pair_report() {
|
||||
local log="$1" color=0
|
||||
# PASS green / FAIL red / NA yellow. auto = only when stdout is a terminal,
|
||||
# so redirecting to a file or piping into grep/diff stays plain text.
|
||||
case "$TL_COLOR" in
|
||||
always|1|yes) color=1 ;;
|
||||
never|0|no) color=0 ;;
|
||||
*) [ -t 1 ] && color=1 ;;
|
||||
esac
|
||||
[ "$TL_REPORT_TSV" = "1" ] && color=0
|
||||
awk -v PAIRS="$TL_PAIRS" \
|
||||
-v TOL="$TL_TOLERANCE" \
|
||||
-v ALL="$TL_REPORT_ALL" \
|
||||
-v GROUPED="$TL_REPORT_GROUPED" \
|
||||
-v WITHPORT="$TL_REPORT_WITHPORT" \
|
||||
-v QUIET="$TL_REPORT_QUIET" \
|
||||
-v TSV="$TL_REPORT_TSV" \
|
||||
-v COLOR="$color" '
|
||||
function grp(v, s,out,l,i) {
|
||||
s = sprintf("%d", v)
|
||||
if (!GROUPED) return s
|
||||
out = ""; l = length(s)
|
||||
for (i = 1; i <= l; i++) {
|
||||
out = out substr(s, i, 1)
|
||||
if (((l - i) % 3) == 0 && i < l) out = out ","
|
||||
}
|
||||
return out
|
||||
}
|
||||
function pname(cd) { return (WITHPORT && (cd in LP)) ? cd "(" LP[cd] ")" : cd }
|
||||
function absd(x) { return (x < 0) ? -x : x }
|
||||
# colour the verdict token: PASS green, FAIL red, NA yellow
|
||||
function vc(v) {
|
||||
if (!COLOR) return v
|
||||
if (v == "PASS") return "\033[32m" v "\033[0m"
|
||||
if (v == "FAIL") return "\033[31m" v "\033[0m"
|
||||
return "\033[33m" v "\033[0m"
|
||||
}
|
||||
function redl(s) { return COLOR ? "\033[31m" s "\033[0m" : s }
|
||||
|
||||
BEGIN {
|
||||
NP = split(PAIRS, L, "\n")
|
||||
for (i = 1; i <= NP; i++) { split(L[i], f, " "); VID[i] = f[1]; A[i] = f[2]; B[i] = f[3] }
|
||||
MISSING = "-"
|
||||
}
|
||||
{
|
||||
idx = index($0, "MIB_")
|
||||
if (idx == 0) next
|
||||
s = substr($0, idx)
|
||||
kind = substr(s, 5, 4)
|
||||
if (kind != "TPOK" && kind != "RPOK") next
|
||||
p1 = index(s, "."); p2 = index(s, "("); p3 = index(s, ")"); p4 = index(s, ":")
|
||||
if (p1 == 0 || p2 == 0 || p3 == 0 || p4 == 0 || p2 < p1 || p4 < p3) next
|
||||
cd = substr(s, p1 + 1, p2 - p1 - 1)
|
||||
if (cd !~ /^cd[0-9]+$/) next
|
||||
lp = substr(s, p2 + 1, p3 - p2 - 1)
|
||||
val = substr(s, p4 + 1)
|
||||
sub(/^[ \t]+/, "", val)
|
||||
if (val !~ /^[0-9,]/) next
|
||||
sub(/[ \t].*$/, "", val)
|
||||
gsub(/,/, "", val)
|
||||
LP[cd] = lp
|
||||
if (kind == "TPOK") { TX[cd] = val + 0; HTX[cd] = 1 } else { RX[cd] = val + 0; HRX[cd] = 1 }
|
||||
seen++
|
||||
}
|
||||
END {
|
||||
if (seen == 0) {
|
||||
print "error: no MIB_TPOK/MIB_RPOK counter found in the log" > "/dev/stderr"
|
||||
exit 1
|
||||
}
|
||||
npass = nfail = nna = 0; nrow = 0; nrep = 0; miss = ""; nf = 0
|
||||
for (i = 1; i <= NP; i++) {
|
||||
a = A[i]; b = B[i]
|
||||
oka = (a in HTX) && (a in HRX); okb = (b in HTX) && (b in HRX)
|
||||
if (!(oka && okb)) {
|
||||
v = "NA"; nna++
|
||||
miss = miss (miss == "" ? "" : " ") a "/" b
|
||||
if (!ALL) continue
|
||||
ta = oka ? grp(TX[a]) : MISSING; ra = oka ? grp(RX[a]) : MISSING
|
||||
tb = okb ? grp(TX[b]) : MISSING; rb = okb ? grp(RX[b]) : MISSING
|
||||
} else {
|
||||
dtx = TX[a] - RX[b]; drx = RX[a] - TX[b]
|
||||
d = absd(dtx); if (absd(drx) > d) d = absd(drx)
|
||||
if (d <= TOL + 0) { v = "PASS"; npass++ }
|
||||
else {
|
||||
v = "FAIL"; nfail++
|
||||
FL[++nf] = sprintf("# FAIL %s/%s: %s.TX-%s.RX=%+d %s.RX-%s.TX=%+d", \
|
||||
a, b, a, b, dtx, a, b, drx)
|
||||
}
|
||||
ta = grp(TX[a]); ra = grp(RX[a]); tb = grp(TX[b]); rb = grp(RX[b])
|
||||
}
|
||||
nrep++
|
||||
nrow++; C0[nrow] = pname(a); C1[nrow] = ta; C2[nrow] = ra; C3[nrow] = v
|
||||
nrow++; C0[nrow] = pname(b); C1[nrow] = tb; C2[nrow] = rb; C3[nrow] = v
|
||||
}
|
||||
|
||||
H0 = "Port"; H1 = "TX"; H2 = "RX"; H3 = "PASS/FAIL"
|
||||
if (TSV) {
|
||||
print H0 "\t" H1 "\t" H2 "\t" H3
|
||||
for (r = 1; r <= nrow; r++) print C0[r] "\t" C1[r] "\t" C2[r] "\t" C3[r]
|
||||
} else {
|
||||
w0 = length(H0); w1 = length(H1); w2 = length(H2); w3 = length(H3)
|
||||
for (r = 1; r <= nrow; r++) {
|
||||
if (length(C0[r]) > w0) w0 = length(C0[r])
|
||||
if (length(C1[r]) > w1) w1 = length(C1[r])
|
||||
if (length(C2[r]) > w2) w2 = length(C2[r])
|
||||
if (length(C3[r]) > w3) w3 = length(C3[r])
|
||||
}
|
||||
w0 += 2; w1 += 2; w2 += 2; w3 += 2
|
||||
printf "%-*s%*s%*s%*s\n", w0, H0, w1, H1, w2, H2, w3, H3
|
||||
for (r = 1; r <= nrow; r++) {
|
||||
# pad on the plain text, then colour, so the columns stay aligned
|
||||
printf "%-*s%*s%*s", w0, C0[r], w1, C1[r], w2, C2[r]
|
||||
printf "%*s%s\n", w3 - length(C3[r]), "", vc(C3[r])
|
||||
}
|
||||
}
|
||||
|
||||
if (!QUIET) {
|
||||
print ""
|
||||
printf "# pairs in table : %d\n", NP
|
||||
printf "# pairs reported : %d\n", nrep
|
||||
printf "# %s %d %s %d %s %d (tolerance %d)\n", \
|
||||
vc("PASS"), npass, vc("FAIL"), nfail, vc("NA"), nna, TOL + 0
|
||||
if (miss != "") printf "# %s (no counters): %s\n", vc("NA"), miss
|
||||
for (i = 1; i <= nf; i++) print redl(FL[i])
|
||||
}
|
||||
exit (nfail || nna) ? 2 : 0
|
||||
}' "$log"
|
||||
}
|
||||
|
||||
# traffic_linespeed_report -- 'show c' per unit, keep the raw log, render the table
|
||||
traffic_linespeed_report() {
|
||||
local unit log rc worst=0 stamp
|
||||
# -f <log>: offline mode, no DUT access, no unit loop
|
||||
if [ -n "$TL_REPORT_FILE" ]; then
|
||||
[ -r "$TL_REPORT_FILE" ] || { _tl_err "cannot read log '$TL_REPORT_FILE'"; return 1; }
|
||||
_tl_info "report from log: $TL_REPORT_FILE (tolerance $TL_TOLERANCE)"
|
||||
_tl_pair_report "$TL_REPORT_FILE"; return $?
|
||||
fi
|
||||
|
||||
_tl_units_check || return 1
|
||||
if [ "$TL_DRY_RUN" = "1" ]; then
|
||||
for unit in $TL_UNITS; do _tl_bcm "$unit" "show c" >/dev/null; done
|
||||
return 0
|
||||
fi
|
||||
|
||||
stamp=$(date +%Y%m%d_%H%M%S 2>/dev/null || echo now)
|
||||
for unit in $TL_UNITS; do
|
||||
log="$TL_LOG_DIR/showc_unit${unit}_${stamp}.log"
|
||||
if ! _tl_bcm "$unit" "show c" > "$log" 2>&1; then
|
||||
_tl_err "unit $unit: show c failed (see $log)"; return 1
|
||||
fi
|
||||
[ "$TL_REPORT_RAW" = "1" ] && { echo "----- unit $unit : raw show c -----"; cat "$log"; }
|
||||
echo "===== unit $unit : loopback pair counter report (raw: $log) ====="
|
||||
_tl_pair_report "$log"; rc=$?
|
||||
[ "$rc" -gt "$worst" ] && worst=$rc
|
||||
case "$rc" in
|
||||
0) _tl_ok "unit $unit: all pairs PASS" ;;
|
||||
2) _tl_warn "unit $unit: at least one pair FAIL/NA" ;;
|
||||
*) _tl_err "unit $unit: report parse error" ;;
|
||||
esac
|
||||
done
|
||||
return "$worst"
|
||||
}
|
||||
|
||||
# === Convenience: full sequence ps -> 1 -> 2 -> 4 -> report ==================
|
||||
traffic_linespeed_run() {
|
||||
traffic_linespeed_ps || return 1
|
||||
traffic_linespeed_init || return 1
|
||||
traffic_linespeed_clear || return 1
|
||||
traffic_linespeed_start || return 1
|
||||
traffic_linespeed_report
|
||||
local rc=$?
|
||||
_tl_info "traffic done. 'stop' removes the loopback VLAN membership."
|
||||
return $rc
|
||||
}
|
||||
|
||||
# === Help ====================================================================
|
||||
blanton_traffic_linespeed_help() {
|
||||
echo -e "\033[1mblanton_traffic_linespeed.sh - SWB loopback line-speed traffic (bcmcmd)\033[0m"
|
||||
echo ""
|
||||
echo -e " Units: \033[36m$TL_UNITS\033[0m tx: \033[36m$TL_TX_COUNT pkt x ${TL_TX_LENGTH}B\033[0m"
|
||||
echo -e " VLANs: 30..137 ($(_tl_pair_count) loopback pairs, cdN <-> cdN+32)"
|
||||
echo ""
|
||||
echo -e "\033[1mSubcommands\033[0m"
|
||||
echo -e " \033[33minit\033[0m step 1 vlan remove 1 pbm=cd, vlan create/add each pair"
|
||||
echo -e " \033[33mclear\033[0m step 2 clear c"
|
||||
echo -e " \033[33mshow\033[0m step 3/6 show c (run before and after traffic)"
|
||||
echo -e " \033[33mstart\033[0m step 4 tx <count> length=<len> VLantag=<vid> per VLAN"
|
||||
echo -e " \033[33mstop\033[0m step 5 vlan remove <vid> pbm=<pair> [--destroy also destroys]"
|
||||
echo -e " \033[33mps\033[0m ps <portlist> port status (link/speed) of the cabled ports"
|
||||
echo -e " \033[33mreport\033[0m show c -> per-pair TX/RX table + PASS/FAIL cross-check"
|
||||
echo -e " \033[33mrun\033[0m ps -> init -> clear -> start -> report"
|
||||
echo -e " \033[33mhelp\033[0m"
|
||||
echo ""
|
||||
echo -e "\033[1mOptions\033[0m"
|
||||
echo -e " \033[33m-u|--unit\033[0m <0|1|all> bcmcmd unit(s); 'all' = 0 1 (default: $TL_UNITS)"
|
||||
echo -e " \033[33m-c|--count\033[0m <n> tx packet count (default $TL_TX_COUNT)"
|
||||
echo -e " \033[33m-l|--length\033[0m <n> tx packet length (default $TL_TX_LENGTH)"
|
||||
echo -e " \033[33m-p|--ports\033[0m <list> ps port list, or 'all' for every port"
|
||||
echo -e " \033[33m-T|--tolerance\033[0m <n> report: allowed |delta| pkts (default $TL_TOLERANCE; -T 1 = snapshot skew)"
|
||||
echo -e " \033[33m-a|--all\033[0m report: also list pairs with no counters"
|
||||
echo -e " \033[33m-g|--grouped\033[0m report: comma-group values"
|
||||
echo -e " \033[33m-P|--with-port\033[0m report: render cd1(2) instead of cd1"
|
||||
echo -e " \033[33m-q|--quiet\033[0m report: no trailing summary"
|
||||
echo -e " \033[33m--tsv\033[0m report: tab-separated (Excel)"
|
||||
echo -e " \033[33m--raw\033[0m report: also dump the raw 'show c'"
|
||||
echo -e " \033[33m--color|--no-color\033[0m report: force/disable \033[32mPASS\033[0m / \033[31mFAIL\033[0m / \033[33mNA\033[0m colouring"
|
||||
echo -e " (default: colour only when stdout is a terminal)"
|
||||
echo -e " \033[33m-f|--file\033[0m <log> report: parse a saved log, no DUT access"
|
||||
echo -e " \033[33m-d|--debug\033[0m print every bcmcmd command line (stderr) and run it"
|
||||
echo -e " \033[33m-n|--dry-run\033[0m print commands only, do not touch the DUT"
|
||||
echo -e " \033[33m--destroy\033[0m stop: also 'vlan destroy' each VLAN"
|
||||
echo ""
|
||||
echo -e "\033[1mExamples\033[0m"
|
||||
echo -e " blanton_traffic_linespeed ps -u 0"
|
||||
echo -e " blanton_traffic_linespeed init -u 1"
|
||||
echo -e " blanton_traffic_linespeed clear && blanton_traffic_linespeed start"
|
||||
echo -e " blanton_traffic_linespeed report -u 1 -T 1"
|
||||
echo -e " blanton_traffic_linespeed report -u 1 -q | grep -v PASS"
|
||||
echo -e " blanton_traffic_linespeed report -f /tmp/showc_unit1_*.log -a"
|
||||
echo -e " blanton_traffic_linespeed show -u 1 | grep -iE 'error|discard|drop'"
|
||||
echo -e " blanton_traffic_linespeed start -c 1000 -l 9216 -d"
|
||||
echo -e " blanton_traffic_linespeed stop --destroy"
|
||||
echo ""
|
||||
echo -e " report exit code: 0 = all pairs PASS, 2 = any FAIL/NA, 1 = parse error"
|
||||
echo -e " Off-box equivalent: tools/bcm_mibpair_report_V1.1.0.py (python3)"
|
||||
echo -e " ps ports: \033[36m$TL_PS_PORTS\033[0m"
|
||||
echo -e " Table mirrors utils/traffic_loopback_vlan_{setting,remove}.ttl and"
|
||||
echo -e " utils/traffic_loopback_start.ttl - keep them in sync."
|
||||
}
|
||||
|
||||
# === Dispatcher ==============================================================
|
||||
blanton_traffic_linespeed() {
|
||||
local sub="${1:-help}"; shift 2>/dev/null || true
|
||||
while [ $# -gt 0 ]; do
|
||||
case "$1" in
|
||||
-u|--unit)
|
||||
case "$2" in
|
||||
all|both|*,*) TL_UNITS=$(echo "$2" | sed 's/all\|both/0 1/; s/,/ /g') ;;
|
||||
*) TL_UNITS="$2" ;;
|
||||
esac
|
||||
shift 2 ;;
|
||||
-c|--count) TL_TX_COUNT="$2"; shift 2 ;;
|
||||
-l|--length) TL_TX_LENGTH="$2"; shift 2 ;;
|
||||
-p|--ports) TL_PS_PORTS="$2"; shift 2 ;;
|
||||
-T|--tolerance) TL_TOLERANCE="$2"; shift 2 ;;
|
||||
-f|--file) TL_REPORT_FILE="$2"; shift 2 ;;
|
||||
-a|--all) TL_REPORT_ALL=1; shift ;;
|
||||
-g|--grouped) TL_REPORT_GROUPED=1; shift ;;
|
||||
-P|--with-port) TL_REPORT_WITHPORT=1; shift ;;
|
||||
-q|--quiet) TL_REPORT_QUIET=1; shift ;;
|
||||
--tsv) TL_REPORT_TSV=1; shift ;;
|
||||
--raw) TL_REPORT_RAW=1; shift ;;
|
||||
--color) TL_COLOR=always; shift ;;
|
||||
--no-color) TL_COLOR=never; shift ;;
|
||||
-d|--debug) DEBUG_MODE=1; shift ;;
|
||||
-n|--dry-run) TL_DRY_RUN=1; shift ;;
|
||||
--destroy) TL_DESTROY=1; shift ;;
|
||||
-h|--help) blanton_traffic_linespeed_help; return 0 ;;
|
||||
-*) _tl_err "unknown option '$1'"; return 1 ;;
|
||||
*) # bare argument: only meaningful as the 'ps' port list
|
||||
if [ "$sub" = "ps" ] || [ "$sub" = "status" ]; then
|
||||
TL_PS_PORTS="$1"; shift
|
||||
else
|
||||
_tl_err "unexpected argument '$1'"; return 1
|
||||
fi ;;
|
||||
esac
|
||||
done
|
||||
|
||||
case "$sub" in
|
||||
init) traffic_linespeed_init ;;
|
||||
clear) traffic_linespeed_clear ;;
|
||||
show) traffic_linespeed_show ;;
|
||||
start) traffic_linespeed_start ;;
|
||||
stop) traffic_linespeed_stop ;;
|
||||
ps|status) traffic_linespeed_ps ;;
|
||||
report|rpt) traffic_linespeed_report ;;
|
||||
run|all) traffic_linespeed_run ;;
|
||||
debug) traffic_debug on ;;
|
||||
help|-h|--help) blanton_traffic_linespeed_help ;;
|
||||
*) _tl_err "unknown subcommand '$sub'"; blanton_traffic_linespeed_help; return 1 ;;
|
||||
esac
|
||||
}
|
||||
|
||||
# Executed directly -> dispatch. Sourced -> just expose the functions + help.
|
||||
if [ "${BASH_SOURCE[0]}" = "$0" ]; then
|
||||
blanton_traffic_linespeed "$@"
|
||||
else
|
||||
blanton_traffic_linespeed_help
|
||||
fi
|
||||
@@ -0,0 +1,325 @@
|
||||
#!/usr/bin/env python3
|
||||
# -*- coding: utf-8 -*-
|
||||
"""
|
||||
bcm_mibpair_report_V1.1.0.py
|
||||
|
||||
Author : ETWen
|
||||
Date : 20260730
|
||||
|
||||
Purpose : Extract MIB_TPOK / MIB_RPOK counters from a Broadcom drivshell log
|
||||
and lay them out horizontally, one loopback pair per block:
|
||||
|
||||
Port TX RX PASS/FAIL
|
||||
cd1 723629081133 581693309458 PASS
|
||||
cd33 581693309458 723629081133 PASS
|
||||
|
||||
Pair membership and pair order come from the
|
||||
"vlan remove <vid> pbm=cdA,cdB" lines in the same log, so the report
|
||||
always follows the order the test actually ran in.
|
||||
|
||||
Verdict per pair comes from the loopback cross-check: for a pair,
|
||||
cdA.TPOK must equal cdB.RPOK and cdA.RPOK must equal cdB.TPOK.
|
||||
PASS - both directions match (within --tolerance)
|
||||
FAIL - at least one direction is off; delta is listed in the
|
||||
trailing summary
|
||||
NA - the pair has no counters in the log
|
||||
|
||||
Usage : ./bcm_mibpair_report_V1.1.0.py <drivshell.log> [options]
|
||||
|
||||
-a, --all also emit pairs that have no counters in the log
|
||||
(values shown as "-")
|
||||
-b, --block repeat the header and blank-separate each pair
|
||||
-g, --grouped keep the SDK's comma grouping (1,234,567)
|
||||
-p, --with-port render "cd1(2)" instead of "cd1"
|
||||
-t, --tsv tab-separated output (for Excel / pandas)
|
||||
-s, --no-status drop the PASS/FAIL column
|
||||
-T, --tolerance N allowed |delta| in packets before a pair is FAIL
|
||||
(default 0). A +/-1 skew is normal: the SDK reads
|
||||
counters port-by-port while traffic still runs, so
|
||||
-T 1 is a reasonable production setting.
|
||||
-q, --quiet suppress the trailing summary comments
|
||||
-o, --output write to a file instead of stdout
|
||||
|
||||
Notes : - The trailing "+delta" column printed by the SDK is stripped.
|
||||
- A cd port missing from the dump usually means the console
|
||||
scrolled or auto-logged out mid-"show c", NOT that the port was
|
||||
down. Cross-check against "ps" before drawing conclusions.
|
||||
- A +/-1 packet delta between a pair is normal snapshot skew: the
|
||||
SDK reads counters port-by-port while traffic is still running.
|
||||
|
||||
Exit : 0 = every pair had counters and cross-checked clean
|
||||
1 = usage / input error
|
||||
2 = at least one pair is FAIL or NA (see summary)
|
||||
|
||||
Version History
|
||||
V1.0.0 20260730 Initial Version (parity with bcm_mibpair_report_V1.2.0.sh)
|
||||
V1.0.1 20260730 Handle BrokenPipeError quietly when piped into head
|
||||
V1.1.0 20260730 Add PASS/FAIL/NA verdict column and --tolerance
|
||||
"""
|
||||
|
||||
from __future__ import annotations
|
||||
|
||||
import argparse
|
||||
import re
|
||||
import sys
|
||||
from dataclasses import dataclass, field
|
||||
from pathlib import Path
|
||||
from typing import Iterable, TextIO
|
||||
|
||||
EXIT_OK = 0
|
||||
EXIT_USAGE = 1
|
||||
EXIT_WARN = 2
|
||||
|
||||
# "vlan remove 31 pbm=cd1,cd33"
|
||||
RE_PBM = re.compile(r"pbm=(cd\d+),(cd\d+)")
|
||||
|
||||
# "MIB_TPOK.cd1(2) : 723,629,081,133 +723,629,081,133"
|
||||
RE_MIB = re.compile(
|
||||
r"^MIB_(?P<kind>TPOK|RPOK)\.(?P<cd>cd\d+)\((?P<lport>\d+)\)\s*:\s*(?P<val>[\d,]+)"
|
||||
)
|
||||
|
||||
MISSING = "-"
|
||||
|
||||
|
||||
@dataclass
|
||||
class PortCounters:
|
||||
"""TPOK / RPOK for a single cd port."""
|
||||
|
||||
lport: int | None = None
|
||||
tx: int | None = None
|
||||
rx: int | None = None
|
||||
|
||||
@property
|
||||
def complete(self) -> bool:
|
||||
return self.tx is not None and self.rx is not None
|
||||
|
||||
|
||||
@dataclass
|
||||
class LogData:
|
||||
"""Everything the report needs, extracted from one drivshell log."""
|
||||
|
||||
pairs: list[tuple[str, str]] = field(default_factory=list)
|
||||
ports: dict[str, PortCounters] = field(default_factory=dict)
|
||||
|
||||
def counters(self, cd: str) -> PortCounters:
|
||||
return self.ports.setdefault(cd, PortCounters())
|
||||
|
||||
|
||||
def parse_log(lines: Iterable[str]) -> LogData:
|
||||
"""Pull pbm pair definitions and TPOK/RPOK counters out of a drivshell log."""
|
||||
data = LogData()
|
||||
seen_pairs: set[tuple[str, str]] = set()
|
||||
|
||||
for raw in lines:
|
||||
line = raw.rstrip("\r\n")
|
||||
|
||||
for a, b in RE_PBM.findall(line):
|
||||
if (a, b) not in seen_pairs:
|
||||
seen_pairs.add((a, b))
|
||||
data.pairs.append((a, b))
|
||||
|
||||
# drivshell echoes commands, so a MIB line may be prefixed with
|
||||
# "drivshell>" noise; anchor on the MIB_ token instead of the line start.
|
||||
idx = line.find("MIB_")
|
||||
if idx < 0:
|
||||
continue
|
||||
m = RE_MIB.match(line[idx:])
|
||||
if not m:
|
||||
continue
|
||||
|
||||
pc = data.counters(m.group("cd"))
|
||||
pc.lport = int(m.group("lport"))
|
||||
value = int(m.group("val").replace(",", ""))
|
||||
if m.group("kind") == "TPOK":
|
||||
pc.tx = value
|
||||
else:
|
||||
pc.rx = value
|
||||
|
||||
return data
|
||||
|
||||
|
||||
def fmt_value(value: int | None, grouped: bool) -> str:
|
||||
if value is None:
|
||||
return MISSING
|
||||
return f"{value:,}" if grouped else str(value)
|
||||
|
||||
|
||||
def fmt_port(cd: str, pc: PortCounters, with_port: bool) -> str:
|
||||
if with_port and pc.lport is not None:
|
||||
return f"{cd}({pc.lport})"
|
||||
return cd
|
||||
|
||||
|
||||
PASS, FAIL, NA = "PASS", "FAIL", "NA"
|
||||
|
||||
|
||||
def pair_deltas(data: LogData, a: str, b: str) -> tuple[int, int] | None:
|
||||
"""(cdA.TX - cdB.RX, cdA.RX - cdB.TX), or None if counters are missing."""
|
||||
pa, pb = data.counters(a), data.counters(b)
|
||||
if not (pa.complete and pb.complete):
|
||||
return None
|
||||
return pa.tx - pb.rx, pa.rx - pb.tx
|
||||
|
||||
|
||||
def verdict(data: LogData, a: str, b: str, tolerance: int) -> str:
|
||||
d = pair_deltas(data, a, b)
|
||||
if d is None:
|
||||
return NA
|
||||
return PASS if max(abs(d[0]), abs(d[1])) <= tolerance else FAIL
|
||||
|
||||
|
||||
def render(data: LogData, args: argparse.Namespace, out: TextIO) -> int:
|
||||
status = not args.no_status
|
||||
rows: list[tuple[str, ...]] = []
|
||||
blocks: list[list[tuple[str, ...]]] = []
|
||||
missing: list[tuple[str, str]] = []
|
||||
failed: list[tuple[str, str, int, int]] = []
|
||||
tally = {PASS: 0, FAIL: 0, NA: 0}
|
||||
|
||||
for a, b in data.pairs:
|
||||
pa, pb = data.counters(a), data.counters(b)
|
||||
v = verdict(data, a, b, args.tolerance)
|
||||
tally[v] += 1
|
||||
if v == NA:
|
||||
missing.append((a, b))
|
||||
if not args.all:
|
||||
continue
|
||||
elif v == FAIL:
|
||||
d_tx, d_rx = pair_deltas(data, a, b)
|
||||
failed.append((a, b, d_tx, d_rx))
|
||||
|
||||
block = []
|
||||
for cd, pc in ((a, pa), (b, pb)):
|
||||
row = (
|
||||
fmt_port(cd, pc, args.with_port),
|
||||
fmt_value(pc.tx, args.grouped),
|
||||
fmt_value(pc.rx, args.grouped),
|
||||
)
|
||||
block.append(row + (v,) if status else row)
|
||||
blocks.append(block)
|
||||
rows.extend(block)
|
||||
|
||||
header = ("Port", "TX", "RX", "PASS/FAIL") if status else ("Port", "TX", "RX")
|
||||
|
||||
if args.tsv:
|
||||
if not args.block:
|
||||
print("\t".join(header), file=out)
|
||||
for block in blocks:
|
||||
if args.block:
|
||||
print("\t".join(header), file=out)
|
||||
for row in block:
|
||||
print("\t".join(row), file=out)
|
||||
if args.block:
|
||||
print(file=out)
|
||||
else:
|
||||
# size columns to the widest cell actually emitted
|
||||
ncol = len(header)
|
||||
width = [
|
||||
max([len(r[i]) for r in rows] + [len(header[i])]) + 2
|
||||
for i in range(ncol)
|
||||
]
|
||||
|
||||
def line(row: tuple[str, ...]) -> str:
|
||||
cells = [f"{row[0]:<{width[0]}}"]
|
||||
cells += [f"{row[i]:>{width[i]}}" for i in range(1, ncol)]
|
||||
return "".join(cells).rstrip()
|
||||
|
||||
if not args.block:
|
||||
print(line(header), file=out)
|
||||
for block in blocks:
|
||||
if args.block:
|
||||
print(line(header), file=out)
|
||||
for row in block:
|
||||
print(line(row), file=out)
|
||||
if args.block:
|
||||
print(file=out)
|
||||
|
||||
if not args.quiet:
|
||||
if not args.block:
|
||||
print(file=out)
|
||||
print(f"# pairs in pbm list : {len(data.pairs)}", file=out)
|
||||
print(f"# pairs reported : {len(blocks)}", file=out)
|
||||
print(
|
||||
f"# PASS {tally[PASS]} FAIL {tally[FAIL]} NA {tally[NA]}"
|
||||
f" (tolerance {args.tolerance})",
|
||||
file=out,
|
||||
)
|
||||
if missing:
|
||||
joined = " ".join(f"{a}/{b}" for a, b in missing)
|
||||
print(f"# NA (no counters): {joined}", file=out)
|
||||
for a, b, d_tx, d_rx in failed:
|
||||
print(
|
||||
f"# FAIL {a}/{b}: {a}.TX-{b}.RX={d_tx:+d} {a}.RX-{b}.TX={d_rx:+d}",
|
||||
file=out,
|
||||
)
|
||||
|
||||
return EXIT_WARN if (tally[FAIL] or tally[NA]) else EXIT_OK
|
||||
|
||||
|
||||
def build_parser() -> argparse.ArgumentParser:
|
||||
p = argparse.ArgumentParser(
|
||||
description="Render Broadcom drivshell MIB_TPOK/RPOK counters as a "
|
||||
"loopback-pair table.",
|
||||
epilog="Exit 2 means missing counters and/or a cross-check mismatch.",
|
||||
)
|
||||
p.add_argument("log", type=Path, help="drivshell log file ('-' for stdin)")
|
||||
p.add_argument("-a", "--all", action="store_true",
|
||||
help="also emit pairs with no counters")
|
||||
p.add_argument("-b", "--block", action="store_true",
|
||||
help="repeat header and blank-separate each pair")
|
||||
p.add_argument("-g", "--grouped", action="store_true",
|
||||
help="keep comma grouping in values")
|
||||
p.add_argument("-p", "--with-port", action="store_true",
|
||||
help="render cd1(2) instead of cd1")
|
||||
p.add_argument("-t", "--tsv", action="store_true",
|
||||
help="tab-separated output")
|
||||
p.add_argument("-s", "--no-status", action="store_true",
|
||||
help="drop the PASS/FAIL column")
|
||||
p.add_argument("-T", "--tolerance", type=int, default=0, metavar="N",
|
||||
help="allowed |delta| in packets before a pair is FAIL "
|
||||
"(default 0; -T 1 absorbs normal snapshot skew)")
|
||||
p.add_argument("-q", "--quiet", action="store_true",
|
||||
help="suppress trailing summary comments")
|
||||
p.add_argument("-o", "--output", type=Path, default=None,
|
||||
help="write to a file instead of stdout")
|
||||
return p
|
||||
|
||||
|
||||
def main(argv: list[str] | None = None) -> int:
|
||||
args = build_parser().parse_args(argv)
|
||||
|
||||
try:
|
||||
if str(args.log) == "-":
|
||||
data = parse_log(sys.stdin)
|
||||
else:
|
||||
# console captures are frequently not clean UTF-8
|
||||
with args.log.open("r", encoding="utf-8", errors="replace") as fh:
|
||||
data = parse_log(fh)
|
||||
except OSError as exc:
|
||||
print(f"error: cannot read log: {exc}", file=sys.stderr)
|
||||
return EXIT_USAGE
|
||||
|
||||
if not data.pairs:
|
||||
print("error: no 'pbm=cdA,cdB' pair definition found in log",
|
||||
file=sys.stderr)
|
||||
return EXIT_USAGE
|
||||
|
||||
try:
|
||||
if args.output:
|
||||
with args.output.open("w", encoding="utf-8", newline="\n") as fh:
|
||||
return render(data, args, fh)
|
||||
return render(data, args, sys.stdout)
|
||||
except BrokenPipeError:
|
||||
# downstream closed the pipe (e.g. "| head") - not an error
|
||||
try:
|
||||
sys.stdout.close()
|
||||
except BrokenPipeError:
|
||||
pass
|
||||
return EXIT_OK
|
||||
except OSError as exc:
|
||||
print(f"error: cannot write output: {exc}", file=sys.stderr)
|
||||
return EXIT_USAGE
|
||||
|
||||
|
||||
if __name__ == "__main__":
|
||||
sys.exit(main())
|
||||
@@ -0,0 +1,108 @@
|
||||
bcmcmd -n 1 -c 'tx 100 length=512 VLantag=30'
|
||||
bcmcmd -n 1 -c 'tx 100 length=512 VLantag=31'
|
||||
bcmcmd -n 1 -c 'tx 100 length=512 VLantag=32'
|
||||
bcmcmd -n 1 -c 'tx 100 length=512 VLantag=33'
|
||||
bcmcmd -n 1 -c 'tx 100 length=512 VLantag=34'
|
||||
bcmcmd -n 1 -c 'tx 100 length=512 VLantag=35'
|
||||
bcmcmd -n 1 -c 'tx 100 length=512 VLantag=36'
|
||||
bcmcmd -n 1 -c 'tx 100 length=512 VLantag=37'
|
||||
bcmcmd -n 1 -c 'tx 100 length=512 VLantag=38'
|
||||
bcmcmd -n 1 -c 'tx 100 length=512 VLantag=39'
|
||||
bcmcmd -n 1 -c 'tx 100 length=512 VLantag=40'
|
||||
bcmcmd -n 1 -c 'tx 100 length=512 VLantag=41'
|
||||
bcmcmd -n 1 -c 'tx 100 length=512 VLantag=42'
|
||||
bcmcmd -n 1 -c 'tx 100 length=512 VLantag=43'
|
||||
bcmcmd -n 1 -c 'tx 100 length=512 VLantag=44'
|
||||
bcmcmd -n 1 -c 'tx 100 length=512 VLantag=45'
|
||||
bcmcmd -n 1 -c 'tx 100 length=512 VLantag=46'
|
||||
bcmcmd -n 1 -c 'tx 100 length=512 VLantag=47'
|
||||
bcmcmd -n 1 -c 'tx 100 length=512 VLantag=48'
|
||||
bcmcmd -n 1 -c 'tx 100 length=512 VLantag=49'
|
||||
bcmcmd -n 1 -c 'tx 100 length=512 VLantag=50'
|
||||
bcmcmd -n 1 -c 'tx 100 length=512 VLantag=51'
|
||||
bcmcmd -n 1 -c 'tx 100 length=512 VLantag=52'
|
||||
bcmcmd -n 1 -c 'tx 100 length=512 VLantag=53'
|
||||
bcmcmd -n 1 -c 'tx 100 length=512 VLantag=54'
|
||||
bcmcmd -n 1 -c 'tx 100 length=512 VLantag=55'
|
||||
bcmcmd -n 1 -c 'tx 100 length=512 VLantag=56'
|
||||
bcmcmd -n 1 -c 'tx 100 length=512 VLantag=57'
|
||||
bcmcmd -n 1 -c 'tx 100 length=512 VLantag=58'
|
||||
bcmcmd -n 1 -c 'tx 100 length=512 VLantag=59'
|
||||
bcmcmd -n 1 -c 'tx 100 length=512 VLantag=60'
|
||||
bcmcmd -n 1 -c 'tx 100 length=512 VLantag=61'
|
||||
bcmcmd -n 1 -c 'tx 100 length=512 VLantag=62'
|
||||
bcmcmd -n 1 -c 'tx 100 length=512 VLantag=63'
|
||||
bcmcmd -n 1 -c 'tx 100 length=512 VLantag=64'
|
||||
bcmcmd -n 1 -c 'tx 100 length=512 VLantag=65'
|
||||
bcmcmd -n 1 -c 'tx 100 length=512 VLantag=66'
|
||||
bcmcmd -n 1 -c 'tx 100 length=512 VLantag=67'
|
||||
bcmcmd -n 1 -c 'tx 100 length=512 VLantag=68'
|
||||
bcmcmd -n 1 -c 'tx 100 length=512 VLantag=69'
|
||||
bcmcmd -n 1 -c 'tx 100 length=512 VLantag=70'
|
||||
bcmcmd -n 1 -c 'tx 100 length=512 VLantag=71'
|
||||
bcmcmd -n 1 -c 'tx 100 length=512 VLantag=72'
|
||||
bcmcmd -n 1 -c 'tx 100 length=512 VLantag=73'
|
||||
bcmcmd -n 1 -c 'tx 100 length=512 VLantag=74'
|
||||
bcmcmd -n 1 -c 'tx 100 length=512 VLantag=75'
|
||||
bcmcmd -n 1 -c 'tx 100 length=512 VLantag=76'
|
||||
bcmcmd -n 1 -c 'tx 100 length=512 VLantag=77'
|
||||
bcmcmd -n 1 -c 'tx 100 length=512 VLantag=78'
|
||||
bcmcmd -n 1 -c 'tx 100 length=512 VLantag=79'
|
||||
bcmcmd -n 1 -c 'tx 100 length=512 VLantag=80'
|
||||
bcmcmd -n 1 -c 'tx 100 length=512 VLantag=81'
|
||||
bcmcmd -n 1 -c 'tx 100 length=512 VLantag=82'
|
||||
bcmcmd -n 1 -c 'tx 100 length=512 VLantag=83'
|
||||
bcmcmd -n 1 -c 'tx 100 length=512 VLantag=84'
|
||||
bcmcmd -n 1 -c 'tx 100 length=512 VLantag=85'
|
||||
bcmcmd -n 1 -c 'tx 100 length=512 VLantag=86'
|
||||
bcmcmd -n 1 -c 'tx 100 length=512 VLantag=87'
|
||||
bcmcmd -n 1 -c 'tx 100 length=512 VLantag=88'
|
||||
bcmcmd -n 1 -c 'tx 100 length=512 VLantag=89'
|
||||
bcmcmd -n 1 -c 'tx 100 length=512 VLantag=90'
|
||||
bcmcmd -n 1 -c 'tx 100 length=512 VLantag=91'
|
||||
bcmcmd -n 1 -c 'tx 100 length=512 VLantag=92'
|
||||
bcmcmd -n 1 -c 'tx 100 length=512 VLantag=93'
|
||||
bcmcmd -n 1 -c 'tx 100 length=512 VLantag=94'
|
||||
bcmcmd -n 1 -c 'tx 100 length=512 VLantag=95'
|
||||
bcmcmd -n 1 -c 'tx 100 length=512 VLantag=96'
|
||||
bcmcmd -n 1 -c 'tx 100 length=512 VLantag=97'
|
||||
bcmcmd -n 1 -c 'tx 100 length=512 VLantag=98'
|
||||
bcmcmd -n 1 -c 'tx 100 length=512 VLantag=99'
|
||||
bcmcmd -n 1 -c 'tx 100 length=512 VLantag=100'
|
||||
bcmcmd -n 1 -c 'tx 100 length=512 VLantag=101'
|
||||
bcmcmd -n 1 -c 'tx 100 length=512 VLantag=102'
|
||||
bcmcmd -n 1 -c 'tx 100 length=512 VLantag=103'
|
||||
bcmcmd -n 1 -c 'tx 100 length=512 VLantag=104'
|
||||
bcmcmd -n 1 -c 'tx 100 length=512 VLantag=105'
|
||||
bcmcmd -n 1 -c 'tx 100 length=512 VLantag=106'
|
||||
bcmcmd -n 1 -c 'tx 100 length=512 VLantag=107'
|
||||
bcmcmd -n 1 -c 'tx 100 length=512 VLantag=108'
|
||||
bcmcmd -n 1 -c 'tx 100 length=512 VLantag=109'
|
||||
bcmcmd -n 1 -c 'tx 100 length=512 VLantag=110'
|
||||
bcmcmd -n 1 -c 'tx 100 length=512 VLantag=111'
|
||||
bcmcmd -n 1 -c 'tx 100 length=512 VLantag=112'
|
||||
bcmcmd -n 1 -c 'tx 100 length=512 VLantag=113'
|
||||
bcmcmd -n 1 -c 'tx 100 length=512 VLantag=114'
|
||||
bcmcmd -n 1 -c 'tx 100 length=512 VLantag=115'
|
||||
bcmcmd -n 1 -c 'tx 100 length=512 VLantag=116'
|
||||
bcmcmd -n 1 -c 'tx 100 length=512 VLantag=117'
|
||||
bcmcmd -n 1 -c 'tx 100 length=512 VLantag=118'
|
||||
bcmcmd -n 1 -c 'tx 100 length=512 VLantag=119'
|
||||
bcmcmd -n 1 -c 'tx 100 length=512 VLantag=120'
|
||||
bcmcmd -n 1 -c 'tx 100 length=512 VLantag=121'
|
||||
bcmcmd -n 1 -c 'tx 100 length=512 VLantag=122'
|
||||
bcmcmd -n 1 -c 'tx 100 length=512 VLantag=123'
|
||||
bcmcmd -n 1 -c 'tx 100 length=512 VLantag=124'
|
||||
bcmcmd -n 1 -c 'tx 100 length=512 VLantag=125'
|
||||
bcmcmd -n 1 -c 'tx 100 length=512 VLantag=126'
|
||||
bcmcmd -n 1 -c 'tx 100 length=512 VLantag=127'
|
||||
bcmcmd -n 1 -c 'tx 100 length=512 VLantag=128'
|
||||
bcmcmd -n 1 -c 'tx 100 length=512 VLantag=129'
|
||||
bcmcmd -n 1 -c 'tx 100 length=512 VLantag=130'
|
||||
bcmcmd -n 1 -c 'tx 100 length=512 VLantag=131'
|
||||
bcmcmd -n 1 -c 'tx 100 length=512 VLantag=132'
|
||||
bcmcmd -n 1 -c 'tx 100 length=512 VLantag=133'
|
||||
bcmcmd -n 1 -c 'tx 100 length=512 VLantag=134'
|
||||
bcmcmd -n 1 -c 'tx 100 length=512 VLantag=135'
|
||||
bcmcmd -n 1 -c 'tx 100 length=512 VLantag=136'
|
||||
bcmcmd -n 1 -c 'tx 100 length=512 VLantag=137'
|
||||
@@ -0,0 +1,108 @@
|
||||
bcmcmd -n 1 -c 'vlan remove 30 pbm=cd0,cd32'
|
||||
bcmcmd -n 1 -c 'vlan remove 31 pbm=cd1,cd33'
|
||||
bcmcmd -n 1 -c 'vlan remove 32 pbm=cd2,cd34'
|
||||
bcmcmd -n 1 -c 'vlan remove 33 pbm=cd3,cd35'
|
||||
bcmcmd -n 1 -c 'vlan remove 34 pbm=cd4,cd36'
|
||||
bcmcmd -n 1 -c 'vlan remove 35 pbm=cd5,cd37'
|
||||
bcmcmd -n 1 -c 'vlan remove 36 pbm=cd6,cd38'
|
||||
bcmcmd -n 1 -c 'vlan remove 37 pbm=cd7,cd39'
|
||||
bcmcmd -n 1 -c 'vlan remove 38 pbm=cd8,cd40'
|
||||
bcmcmd -n 1 -c 'vlan remove 39 pbm=cd9,cd41'
|
||||
bcmcmd -n 1 -c 'vlan remove 40 pbm=cd10,cd42'
|
||||
bcmcmd -n 1 -c 'vlan remove 41 pbm=cd11,cd43'
|
||||
bcmcmd -n 1 -c 'vlan remove 42 pbm=cd12,cd44'
|
||||
bcmcmd -n 1 -c 'vlan remove 43 pbm=cd13,cd45'
|
||||
bcmcmd -n 1 -c 'vlan remove 44 pbm=cd14,cd46'
|
||||
bcmcmd -n 1 -c 'vlan remove 45 pbm=cd20,cd52'
|
||||
bcmcmd -n 1 -c 'vlan remove 46 pbm=cd21,cd53'
|
||||
bcmcmd -n 1 -c 'vlan remove 47 pbm=cd22,cd54'
|
||||
bcmcmd -n 1 -c 'vlan remove 48 pbm=cd23,cd55'
|
||||
bcmcmd -n 1 -c 'vlan remove 49 pbm=cd24,cd56'
|
||||
bcmcmd -n 1 -c 'vlan remove 50 pbm=cd25,cd57'
|
||||
bcmcmd -n 1 -c 'vlan remove 51 pbm=cd26,cd58'
|
||||
bcmcmd -n 1 -c 'vlan remove 52 pbm=cd27,cd59'
|
||||
bcmcmd -n 1 -c 'vlan remove 53 pbm=cd28,cd60'
|
||||
bcmcmd -n 1 -c 'vlan remove 54 pbm=cd29,cd61'
|
||||
bcmcmd -n 1 -c 'vlan remove 55 pbm=cd30,cd62'
|
||||
bcmcmd -n 1 -c 'vlan remove 56 pbm=cd31,cd63'
|
||||
bcmcmd -n 1 -c 'vlan remove 57 pbm=cd64,cd96'
|
||||
bcmcmd -n 1 -c 'vlan remove 58 pbm=cd65,cd97'
|
||||
bcmcmd -n 1 -c 'vlan remove 59 pbm=cd66,cd98'
|
||||
bcmcmd -n 1 -c 'vlan remove 60 pbm=cd67,cd99'
|
||||
bcmcmd -n 1 -c 'vlan remove 61 pbm=cd68,cd100'
|
||||
bcmcmd -n 1 -c 'vlan remove 62 pbm=cd69,cd101'
|
||||
bcmcmd -n 1 -c 'vlan remove 63 pbm=cd70,cd102'
|
||||
bcmcmd -n 1 -c 'vlan remove 64 pbm=cd71,cd103'
|
||||
bcmcmd -n 1 -c 'vlan remove 65 pbm=cd72,cd104'
|
||||
bcmcmd -n 1 -c 'vlan remove 66 pbm=cd73,cd105'
|
||||
bcmcmd -n 1 -c 'vlan remove 67 pbm=cd74,cd106'
|
||||
bcmcmd -n 1 -c 'vlan remove 68 pbm=cd75,cd107'
|
||||
bcmcmd -n 1 -c 'vlan remove 69 pbm=cd76,cd108'
|
||||
bcmcmd -n 1 -c 'vlan remove 70 pbm=cd77,cd109'
|
||||
bcmcmd -n 1 -c 'vlan remove 71 pbm=cd78,cd110'
|
||||
bcmcmd -n 1 -c 'vlan remove 72 pbm=cd84,cd116'
|
||||
bcmcmd -n 1 -c 'vlan remove 73 pbm=cd85,cd117'
|
||||
bcmcmd -n 1 -c 'vlan remove 74 pbm=cd86,cd118'
|
||||
bcmcmd -n 1 -c 'vlan remove 75 pbm=cd87,cd119'
|
||||
bcmcmd -n 1 -c 'vlan remove 76 pbm=cd88,cd120'
|
||||
bcmcmd -n 1 -c 'vlan remove 77 pbm=cd89,cd121'
|
||||
bcmcmd -n 1 -c 'vlan remove 78 pbm=cd90,cd122'
|
||||
bcmcmd -n 1 -c 'vlan remove 79 pbm=cd91,cd123'
|
||||
bcmcmd -n 1 -c 'vlan remove 80 pbm=cd92,cd124'
|
||||
bcmcmd -n 1 -c 'vlan remove 81 pbm=cd93,cd125'
|
||||
bcmcmd -n 1 -c 'vlan remove 82 pbm=cd94,cd126'
|
||||
bcmcmd -n 1 -c 'vlan remove 83 pbm=cd95,cd127'
|
||||
bcmcmd -n 1 -c 'vlan remove 84 pbm=cd128,cd160'
|
||||
bcmcmd -n 1 -c 'vlan remove 85 pbm=cd129,cd161'
|
||||
bcmcmd -n 1 -c 'vlan remove 86 pbm=cd130,cd162'
|
||||
bcmcmd -n 1 -c 'vlan remove 87 pbm=cd131,cd163'
|
||||
bcmcmd -n 1 -c 'vlan remove 88 pbm=cd132,cd164'
|
||||
bcmcmd -n 1 -c 'vlan remove 89 pbm=cd133,cd165'
|
||||
bcmcmd -n 1 -c 'vlan remove 90 pbm=cd134,cd166'
|
||||
bcmcmd -n 1 -c 'vlan remove 91 pbm=cd135,cd167'
|
||||
bcmcmd -n 1 -c 'vlan remove 92 pbm=cd136,cd168'
|
||||
bcmcmd -n 1 -c 'vlan remove 93 pbm=cd137,cd169'
|
||||
bcmcmd -n 1 -c 'vlan remove 94 pbm=cd138,cd170'
|
||||
bcmcmd -n 1 -c 'vlan remove 95 pbm=cd140,cd172'
|
||||
bcmcmd -n 1 -c 'vlan remove 96 pbm=cd141,cd173'
|
||||
bcmcmd -n 1 -c 'vlan remove 97 pbm=cd142,cd174'
|
||||
bcmcmd -n 1 -c 'vlan remove 98 pbm=cd143,cd175'
|
||||
bcmcmd -n 1 -c 'vlan remove 99 pbm=cd144,cd176'
|
||||
bcmcmd -n 1 -c 'vlan remove 100 pbm=cd145,cd177'
|
||||
bcmcmd -n 1 -c 'vlan remove 101 pbm=cd146,cd178'
|
||||
bcmcmd -n 1 -c 'vlan remove 102 pbm=cd147,cd179'
|
||||
bcmcmd -n 1 -c 'vlan remove 103 pbm=cd152,cd184'
|
||||
bcmcmd -n 1 -c 'vlan remove 104 pbm=cd153,cd185'
|
||||
bcmcmd -n 1 -c 'vlan remove 105 pbm=cd154,cd186'
|
||||
bcmcmd -n 1 -c 'vlan remove 106 pbm=cd155,cd187'
|
||||
bcmcmd -n 1 -c 'vlan remove 107 pbm=cd156,cd188'
|
||||
bcmcmd -n 1 -c 'vlan remove 108 pbm=cd157,cd189'
|
||||
bcmcmd -n 1 -c 'vlan remove 109 pbm=cd158,cd190'
|
||||
bcmcmd -n 1 -c 'vlan remove 110 pbm=cd159,cd191'
|
||||
bcmcmd -n 1 -c 'vlan remove 111 pbm=cd192,cd224'
|
||||
bcmcmd -n 1 -c 'vlan remove 112 pbm=cd193,cd225'
|
||||
bcmcmd -n 1 -c 'vlan remove 113 pbm=cd194,cd226'
|
||||
bcmcmd -n 1 -c 'vlan remove 114 pbm=cd195,cd227'
|
||||
bcmcmd -n 1 -c 'vlan remove 115 pbm=cd196,cd228'
|
||||
bcmcmd -n 1 -c 'vlan remove 116 pbm=cd197,cd229'
|
||||
bcmcmd -n 1 -c 'vlan remove 117 pbm=cd198,cd230'
|
||||
bcmcmd -n 1 -c 'vlan remove 118 pbm=cd199,cd231'
|
||||
bcmcmd -n 1 -c 'vlan remove 119 pbm=cd200,cd232'
|
||||
bcmcmd -n 1 -c 'vlan remove 120 pbm=cd201,cd233'
|
||||
bcmcmd -n 1 -c 'vlan remove 121 pbm=cd202,cd234'
|
||||
bcmcmd -n 1 -c 'vlan remove 122 pbm=cd204,cd236'
|
||||
bcmcmd -n 1 -c 'vlan remove 123 pbm=cd205,cd237'
|
||||
bcmcmd -n 1 -c 'vlan remove 124 pbm=cd206,cd238'
|
||||
bcmcmd -n 1 -c 'vlan remove 125 pbm=cd207,cd239'
|
||||
bcmcmd -n 1 -c 'vlan remove 126 pbm=cd208,cd240'
|
||||
bcmcmd -n 1 -c 'vlan remove 127 pbm=cd209,cd241'
|
||||
bcmcmd -n 1 -c 'vlan remove 128 pbm=cd210,cd242'
|
||||
bcmcmd -n 1 -c 'vlan remove 129 pbm=cd211,cd243'
|
||||
bcmcmd -n 1 -c 'vlan remove 130 pbm=cd216,cd248'
|
||||
bcmcmd -n 1 -c 'vlan remove 131 pbm=cd217,cd249'
|
||||
bcmcmd -n 1 -c 'vlan remove 132 pbm=cd218,cd250'
|
||||
bcmcmd -n 1 -c 'vlan remove 133 pbm=cd219,cd251'
|
||||
bcmcmd -n 1 -c 'vlan remove 134 pbm=cd220,cd252'
|
||||
bcmcmd -n 1 -c 'vlan remove 135 pbm=cd221,cd253'
|
||||
bcmcmd -n 1 -c 'vlan remove 136 pbm=cd222,cd254'
|
||||
bcmcmd -n 1 -c 'vlan remove 137 pbm=cd223,cd255'
|
||||
@@ -0,0 +1,325 @@
|
||||
bcmcmd -n 1 -c 'vlan remove 1 pbm=cd'
|
||||
|
||||
bcmcmd -n 1 -c 'vlan create 30'
|
||||
bcmcmd -n 1 -c 'vlan add 30 pbm=cd0,cd32'
|
||||
|
||||
bcmcmd -n 1 -c 'vlan create 31'
|
||||
bcmcmd -n 1 -c 'vlan add 31 pbm=cd1,cd33'
|
||||
|
||||
bcmcmd -n 1 -c 'vlan create 32'
|
||||
bcmcmd -n 1 -c 'vlan add 32 pbm=cd2,cd34'
|
||||
|
||||
bcmcmd -n 1 -c 'vlan create 33'
|
||||
bcmcmd -n 1 -c 'vlan add 33 pbm=cd3,cd35'
|
||||
|
||||
bcmcmd -n 1 -c 'vlan create 34'
|
||||
bcmcmd -n 1 -c 'vlan add 34 pbm=cd4,cd36'
|
||||
|
||||
bcmcmd -n 1 -c 'vlan create 35'
|
||||
bcmcmd -n 1 -c 'vlan add 35 pbm=cd5,cd37'
|
||||
|
||||
bcmcmd -n 1 -c 'vlan create 36'
|
||||
bcmcmd -n 1 -c 'vlan add 36 pbm=cd6,cd38'
|
||||
|
||||
bcmcmd -n 1 -c 'vlan create 37'
|
||||
bcmcmd -n 1 -c 'vlan add 37 pbm=cd7,cd39'
|
||||
|
||||
bcmcmd -n 1 -c 'vlan create 38'
|
||||
bcmcmd -n 1 -c 'vlan add 38 pbm=cd8,cd40'
|
||||
|
||||
bcmcmd -n 1 -c 'vlan create 39'
|
||||
bcmcmd -n 1 -c 'vlan add 39 pbm=cd9,cd41'
|
||||
|
||||
bcmcmd -n 1 -c 'vlan create 40'
|
||||
bcmcmd -n 1 -c 'vlan add 40 pbm=cd10,cd42'
|
||||
|
||||
bcmcmd -n 1 -c 'vlan create 41'
|
||||
bcmcmd -n 1 -c 'vlan add 41 pbm=cd11,cd43'
|
||||
|
||||
bcmcmd -n 1 -c 'vlan create 42'
|
||||
bcmcmd -n 1 -c 'vlan add 42 pbm=cd12,cd44'
|
||||
|
||||
bcmcmd -n 1 -c 'vlan create 43'
|
||||
bcmcmd -n 1 -c 'vlan add 43 pbm=cd13,cd45'
|
||||
|
||||
bcmcmd -n 1 -c 'vlan create 44'
|
||||
bcmcmd -n 1 -c 'vlan add 44 pbm=cd14,cd46'
|
||||
|
||||
bcmcmd -n 1 -c 'vlan create 45'
|
||||
bcmcmd -n 1 -c 'vlan add 45 pbm=cd20,cd52'
|
||||
|
||||
bcmcmd -n 1 -c 'vlan create 46'
|
||||
bcmcmd -n 1 -c 'vlan add 46 pbm=cd21,cd53'
|
||||
|
||||
bcmcmd -n 1 -c 'vlan create 47'
|
||||
bcmcmd -n 1 -c 'vlan add 47 pbm=cd22,cd54'
|
||||
|
||||
bcmcmd -n 1 -c 'vlan create 48'
|
||||
bcmcmd -n 1 -c 'vlan add 48 pbm=cd23,cd55'
|
||||
|
||||
bcmcmd -n 1 -c 'vlan create 49'
|
||||
bcmcmd -n 1 -c 'vlan add 49 pbm=cd24,cd56'
|
||||
|
||||
bcmcmd -n 1 -c 'vlan create 50'
|
||||
bcmcmd -n 1 -c 'vlan add 50 pbm=cd25,cd57'
|
||||
|
||||
bcmcmd -n 1 -c 'vlan create 51'
|
||||
bcmcmd -n 1 -c 'vlan add 51 pbm=cd26,cd58'
|
||||
|
||||
bcmcmd -n 1 -c 'vlan create 52'
|
||||
bcmcmd -n 1 -c 'vlan add 52 pbm=cd27,cd59'
|
||||
|
||||
bcmcmd -n 1 -c 'vlan create 53'
|
||||
bcmcmd -n 1 -c 'vlan add 53 pbm=cd28,cd60'
|
||||
|
||||
bcmcmd -n 1 -c 'vlan create 54'
|
||||
bcmcmd -n 1 -c 'vlan add 54 pbm=cd29,cd61'
|
||||
|
||||
bcmcmd -n 1 -c 'vlan create 55'
|
||||
bcmcmd -n 1 -c 'vlan add 55 pbm=cd30,cd62'
|
||||
|
||||
bcmcmd -n 1 -c 'vlan create 56'
|
||||
bcmcmd -n 1 -c 'vlan add 56 pbm=cd31,cd63'
|
||||
|
||||
bcmcmd -n 1 -c 'vlan create 57'
|
||||
bcmcmd -n 1 -c 'vlan add 57 pbm=cd64,cd96'
|
||||
|
||||
bcmcmd -n 1 -c 'vlan create 58'
|
||||
bcmcmd -n 1 -c 'vlan add 58 pbm=cd65,cd97'
|
||||
|
||||
bcmcmd -n 1 -c 'vlan create 59'
|
||||
bcmcmd -n 1 -c 'vlan add 59 pbm=cd66,cd98'
|
||||
|
||||
bcmcmd -n 1 -c 'vlan create 60'
|
||||
bcmcmd -n 1 -c 'vlan add 60 pbm=cd67,cd99'
|
||||
|
||||
bcmcmd -n 1 -c 'vlan create 61'
|
||||
bcmcmd -n 1 -c 'vlan add 61 pbm=cd68,cd100'
|
||||
|
||||
bcmcmd -n 1 -c 'vlan create 62'
|
||||
bcmcmd -n 1 -c 'vlan add 62 pbm=cd69,cd101'
|
||||
|
||||
bcmcmd -n 1 -c 'vlan create 63'
|
||||
bcmcmd -n 1 -c 'vlan add 63 pbm=cd70,cd102'
|
||||
|
||||
bcmcmd -n 1 -c 'vlan create 64'
|
||||
bcmcmd -n 1 -c 'vlan add 64 pbm=cd71,cd103'
|
||||
|
||||
bcmcmd -n 1 -c 'vlan create 65'
|
||||
bcmcmd -n 1 -c 'vlan add 65 pbm=cd72,cd104'
|
||||
|
||||
bcmcmd -n 1 -c 'vlan create 66'
|
||||
bcmcmd -n 1 -c 'vlan add 66 pbm=cd73,cd105'
|
||||
|
||||
bcmcmd -n 1 -c 'vlan create 67'
|
||||
bcmcmd -n 1 -c 'vlan add 67 pbm=cd74,cd106'
|
||||
|
||||
bcmcmd -n 1 -c 'vlan create 68'
|
||||
bcmcmd -n 1 -c 'vlan add 68 pbm=cd75,cd107'
|
||||
|
||||
bcmcmd -n 1 -c 'vlan create 69'
|
||||
bcmcmd -n 1 -c 'vlan add 69 pbm=cd76,cd108'
|
||||
|
||||
bcmcmd -n 1 -c 'vlan create 70'
|
||||
bcmcmd -n 1 -c 'vlan add 70 pbm=cd77,cd109'
|
||||
|
||||
bcmcmd -n 1 -c 'vlan create 71'
|
||||
bcmcmd -n 1 -c 'vlan add 71 pbm=cd78,cd110'
|
||||
|
||||
bcmcmd -n 1 -c 'vlan create 72'
|
||||
bcmcmd -n 1 -c 'vlan add 72 pbm=cd84,cd116'
|
||||
|
||||
bcmcmd -n 1 -c 'vlan create 73'
|
||||
bcmcmd -n 1 -c 'vlan add 73 pbm=cd85,cd117'
|
||||
|
||||
bcmcmd -n 1 -c 'vlan create 74'
|
||||
bcmcmd -n 1 -c 'vlan add 74 pbm=cd86,cd118'
|
||||
|
||||
bcmcmd -n 1 -c 'vlan create 75'
|
||||
bcmcmd -n 1 -c 'vlan add 75 pbm=cd87,cd119'
|
||||
|
||||
bcmcmd -n 1 -c 'vlan create 76'
|
||||
bcmcmd -n 1 -c 'vlan add 76 pbm=cd88,cd120'
|
||||
|
||||
bcmcmd -n 1 -c 'vlan create 77'
|
||||
bcmcmd -n 1 -c 'vlan add 77 pbm=cd89,cd121'
|
||||
|
||||
bcmcmd -n 1 -c 'vlan create 78'
|
||||
bcmcmd -n 1 -c 'vlan add 78 pbm=cd90,cd122'
|
||||
|
||||
bcmcmd -n 1 -c 'vlan create 79'
|
||||
bcmcmd -n 1 -c 'vlan add 79 pbm=cd91,cd123'
|
||||
|
||||
bcmcmd -n 1 -c 'vlan create 80'
|
||||
bcmcmd -n 1 -c 'vlan add 80 pbm=cd92,cd124'
|
||||
|
||||
bcmcmd -n 1 -c 'vlan create 81'
|
||||
bcmcmd -n 1 -c 'vlan add 81 pbm=cd93,cd125'
|
||||
|
||||
bcmcmd -n 1 -c 'vlan create 82'
|
||||
bcmcmd -n 1 -c 'vlan add 82 pbm=cd94,cd126'
|
||||
|
||||
bcmcmd -n 1 -c 'vlan create 83'
|
||||
bcmcmd -n 1 -c 'vlan add 83 pbm=cd95,cd127'
|
||||
|
||||
bcmcmd -n 1 -c 'vlan create 84'
|
||||
bcmcmd -n 1 -c 'vlan add 84 pbm=cd128,cd160'
|
||||
|
||||
bcmcmd -n 1 -c 'vlan create 85'
|
||||
bcmcmd -n 1 -c 'vlan add 85 pbm=cd129,cd161'
|
||||
|
||||
bcmcmd -n 1 -c 'vlan create 86'
|
||||
bcmcmd -n 1 -c 'vlan add 86 pbm=cd130,cd162'
|
||||
|
||||
bcmcmd -n 1 -c 'vlan create 87'
|
||||
bcmcmd -n 1 -c 'vlan add 87 pbm=cd131,cd163'
|
||||
|
||||
bcmcmd -n 1 -c 'vlan create 88'
|
||||
bcmcmd -n 1 -c 'vlan add 88 pbm=cd132,cd164'
|
||||
|
||||
bcmcmd -n 1 -c 'vlan create 89'
|
||||
bcmcmd -n 1 -c 'vlan add 89 pbm=cd133,cd165'
|
||||
|
||||
bcmcmd -n 1 -c 'vlan create 90'
|
||||
bcmcmd -n 1 -c 'vlan add 90 pbm=cd134,cd166'
|
||||
|
||||
bcmcmd -n 1 -c 'vlan create 91'
|
||||
bcmcmd -n 1 -c 'vlan add 91 pbm=cd135,cd167'
|
||||
|
||||
bcmcmd -n 1 -c 'vlan create 92'
|
||||
bcmcmd -n 1 -c 'vlan add 92 pbm=cd136,cd168'
|
||||
|
||||
bcmcmd -n 1 -c 'vlan create 93'
|
||||
bcmcmd -n 1 -c 'vlan add 93 pbm=cd137,cd169'
|
||||
|
||||
bcmcmd -n 1 -c 'vlan create 94'
|
||||
bcmcmd -n 1 -c 'vlan add 94 pbm=cd138,cd170'
|
||||
|
||||
bcmcmd -n 1 -c 'vlan create 95'
|
||||
bcmcmd -n 1 -c 'vlan add 95 pbm=cd140,cd172'
|
||||
|
||||
bcmcmd -n 1 -c 'vlan create 96'
|
||||
bcmcmd -n 1 -c 'vlan add 96 pbm=cd141,cd173'
|
||||
|
||||
bcmcmd -n 1 -c 'vlan create 97'
|
||||
bcmcmd -n 1 -c 'vlan add 97 pbm=cd142,cd174'
|
||||
|
||||
bcmcmd -n 1 -c 'vlan create 98'
|
||||
bcmcmd -n 1 -c 'vlan add 98 pbm=cd143,cd175'
|
||||
|
||||
bcmcmd -n 1 -c 'vlan create 99'
|
||||
bcmcmd -n 1 -c 'vlan add 99 pbm=cd144,cd176'
|
||||
|
||||
bcmcmd -n 1 -c 'vlan create 100'
|
||||
bcmcmd -n 1 -c 'vlan add 100 pbm=cd145,cd177'
|
||||
|
||||
bcmcmd -n 1 -c 'vlan create 101'
|
||||
bcmcmd -n 1 -c 'vlan add 101 pbm=cd146,cd178'
|
||||
|
||||
bcmcmd -n 1 -c 'vlan create 102'
|
||||
bcmcmd -n 1 -c 'vlan add 102 pbm=cd147,cd179'
|
||||
|
||||
bcmcmd -n 1 -c 'vlan create 103'
|
||||
bcmcmd -n 1 -c 'vlan add 103 pbm=cd152,cd184'
|
||||
|
||||
bcmcmd -n 1 -c 'vlan create 104'
|
||||
bcmcmd -n 1 -c 'vlan add 104 pbm=cd153,cd185'
|
||||
|
||||
bcmcmd -n 1 -c 'vlan create 105'
|
||||
bcmcmd -n 1 -c 'vlan add 105 pbm=cd154,cd186'
|
||||
|
||||
bcmcmd -n 1 -c 'vlan create 106'
|
||||
bcmcmd -n 1 -c 'vlan add 106 pbm=cd155,cd187'
|
||||
|
||||
bcmcmd -n 1 -c 'vlan create 107'
|
||||
bcmcmd -n 1 -c 'vlan add 107 pbm=cd156,cd188'
|
||||
|
||||
bcmcmd -n 1 -c 'vlan create 108'
|
||||
bcmcmd -n 1 -c 'vlan add 108 pbm=cd157,cd189'
|
||||
|
||||
bcmcmd -n 1 -c 'vlan create 109'
|
||||
bcmcmd -n 1 -c 'vlan add 109 pbm=cd158,cd190'
|
||||
|
||||
bcmcmd -n 1 -c 'vlan create 110'
|
||||
bcmcmd -n 1 -c 'vlan add 110 pbm=cd159,cd191'
|
||||
|
||||
bcmcmd -n 1 -c 'vlan create 111'
|
||||
bcmcmd -n 1 -c 'vlan add 111 pbm=cd192,cd224'
|
||||
|
||||
bcmcmd -n 1 -c 'vlan create 112'
|
||||
bcmcmd -n 1 -c 'vlan add 112 pbm=cd193,cd225'
|
||||
|
||||
bcmcmd -n 1 -c 'vlan create 113'
|
||||
bcmcmd -n 1 -c 'vlan add 113 pbm=cd194,cd226'
|
||||
|
||||
bcmcmd -n 1 -c 'vlan create 114'
|
||||
bcmcmd -n 1 -c 'vlan add 114 pbm=cd195,cd227'
|
||||
|
||||
bcmcmd -n 1 -c 'vlan create 115'
|
||||
bcmcmd -n 1 -c 'vlan add 115 pbm=cd196,cd228'
|
||||
|
||||
bcmcmd -n 1 -c 'vlan create 116'
|
||||
bcmcmd -n 1 -c 'vlan add 116 pbm=cd197,cd229'
|
||||
|
||||
bcmcmd -n 1 -c 'vlan create 117'
|
||||
bcmcmd -n 1 -c 'vlan add 117 pbm=cd198,cd230'
|
||||
|
||||
bcmcmd -n 1 -c 'vlan create 118'
|
||||
bcmcmd -n 1 -c 'vlan add 118 pbm=cd199,cd231'
|
||||
|
||||
bcmcmd -n 1 -c 'vlan create 119'
|
||||
bcmcmd -n 1 -c 'vlan add 119 pbm=cd200,cd232'
|
||||
|
||||
bcmcmd -n 1 -c 'vlan create 120'
|
||||
bcmcmd -n 1 -c 'vlan add 120 pbm=cd201,cd233'
|
||||
|
||||
bcmcmd -n 1 -c 'vlan create 121'
|
||||
bcmcmd -n 1 -c 'vlan add 121 pbm=cd202,cd234'
|
||||
|
||||
bcmcmd -n 1 -c 'vlan create 122'
|
||||
bcmcmd -n 1 -c 'vlan add 122 pbm=cd204,cd236'
|
||||
|
||||
bcmcmd -n 1 -c 'vlan create 123'
|
||||
bcmcmd -n 1 -c 'vlan add 123 pbm=cd205,cd237'
|
||||
|
||||
bcmcmd -n 1 -c 'vlan create 124'
|
||||
bcmcmd -n 1 -c 'vlan add 124 pbm=cd206,cd238'
|
||||
|
||||
bcmcmd -n 1 -c 'vlan create 125'
|
||||
bcmcmd -n 1 -c 'vlan add 125 pbm=cd207,cd239'
|
||||
|
||||
bcmcmd -n 1 -c 'vlan create 126'
|
||||
bcmcmd -n 1 -c 'vlan add 126 pbm=cd208,cd240'
|
||||
|
||||
bcmcmd -n 1 -c 'vlan create 127'
|
||||
bcmcmd -n 1 -c 'vlan add 127 pbm=cd209,cd241'
|
||||
|
||||
bcmcmd -n 1 -c 'vlan create 128'
|
||||
bcmcmd -n 1 -c 'vlan add 128 pbm=cd210,cd242'
|
||||
|
||||
bcmcmd -n 1 -c 'vlan create 129'
|
||||
bcmcmd -n 1 -c 'vlan add 129 pbm=cd211,cd243'
|
||||
|
||||
bcmcmd -n 1 -c 'vlan create 130'
|
||||
bcmcmd -n 1 -c 'vlan add 130 pbm=cd216,cd248'
|
||||
|
||||
bcmcmd -n 1 -c 'vlan create 131'
|
||||
bcmcmd -n 1 -c 'vlan add 131 pbm=cd217,cd249'
|
||||
|
||||
bcmcmd -n 1 -c 'vlan create 132'
|
||||
bcmcmd -n 1 -c 'vlan add 132 pbm=cd218,cd250'
|
||||
|
||||
bcmcmd -n 1 -c 'vlan create 133'
|
||||
bcmcmd -n 1 -c 'vlan add 133 pbm=cd219,cd251'
|
||||
|
||||
bcmcmd -n 1 -c 'vlan create 134'
|
||||
bcmcmd -n 1 -c 'vlan add 134 pbm=cd220,cd252'
|
||||
|
||||
bcmcmd -n 1 -c 'vlan create 135'
|
||||
bcmcmd -n 1 -c 'vlan add 135 pbm=cd221,cd253'
|
||||
|
||||
bcmcmd -n 1 -c 'vlan create 136'
|
||||
bcmcmd -n 1 -c 'vlan add 136 pbm=cd222,cd254'
|
||||
|
||||
bcmcmd -n 1 -c 'vlan create 137'
|
||||
bcmcmd -n 1 -c 'vlan add 137 pbm=cd223,cd255'
|
||||
Reference in New Issue
Block a user