prompt_SVOS = "SVOS> "

ip = "192.168.1.21"   ; PDU IP
device = 1             ; PDU 裝置編號（iPoMan II/III 以 1 為預設）
port = 1               ; 要測試的插座埠
act_off = 0
act_on = 1

; ── 連線 ──
pduconnect device ip
if result == 0 then
    messagebox 'PDU connect failed — 檢查 IP / 網路 / community'
endif

cnt_total = 0
while 1
    ; ── 單埠 OFF → ON 電源循環 ──
    flushrecv                      ; 清掉上一輪殘留輸出，等待 boot 訊息更乾淨
    pause 3
    pductrl device port act_off
    pause 5
    pductrl device port act_on
    pause 3

    wait "Select profile(primary):"
    sendln "0"
    wait "ServiceOS login:"
    sendln "admin"

    wait prompt_SVOS
    sendln "version"
    wait prompt_SVOS
    sendln "help"
    wait prompt_SVOS
    sendln "help"
    wait prompt_SVOS

    cnt_total = cnt_total + 1
    sprintf2 total_print "====== Total Power Cycle :%d ======" cnt_total
	sendln total_print
    wait prompt_SVOS
endwhile