etwen/Blanton_TTL_Script
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases 18 Wiki Activity

Compare commits

base: etwen/Blanton_TTL_Script:V1.1.2
Branches Tags
etwen/Blanton_TTL_Script:main
etwen/Blanton_TTL_Script:V1.2.1 etwen/Blanton_TTL_Script:V1.2.0 etwen/Blanton_TTL_Script:V1.1.8 etwen/Blanton_TTL_Script:V1.1.7 etwen/Blanton_TTL_Script:V1.1.6 etwen/Blanton_TTL_Script:V1.1.5 etwen/Blanton_TTL_Script:V1.1.4 etwen/Blanton_TTL_Script:V1.1.3 etwen/Blanton_TTL_Script:V1.1.2 etwen/Blanton_TTL_Script:V1.1.1 etwen/Blanton_TTL_Script:V1.1.0 etwen/Blanton_TTL_Script:V1.0.11 etwen/Blanton_TTL_Script:V1.0.10 etwen/Blanton_TTL_Script:V1.0.9 etwen/Blanton_TTL_Script:V1.0.8 etwen/Blanton_TTL_Script:V1.0.7 etwen/Blanton_TTL_Script:V1.0.5 etwen/Blanton_TTL_Script:V1.0.3
...
compare: etwen/Blanton_TTL_Script:eacb218da8c7343cd0bf7461949c4b72abb4cd19
Branches Tags
etwen/Blanton_TTL_Script:main
etwen/Blanton_TTL_Script:V1.2.1 etwen/Blanton_TTL_Script:V1.2.0 etwen/Blanton_TTL_Script:V1.1.8 etwen/Blanton_TTL_Script:V1.1.7 etwen/Blanton_TTL_Script:V1.1.6 etwen/Blanton_TTL_Script:V1.1.5 etwen/Blanton_TTL_Script:V1.1.4 etwen/Blanton_TTL_Script:V1.1.3 etwen/Blanton_TTL_Script:V1.1.2 etwen/Blanton_TTL_Script:V1.1.1 etwen/Blanton_TTL_Script:V1.1.0 etwen/Blanton_TTL_Script:V1.0.11 etwen/Blanton_TTL_Script:V1.0.10 etwen/Blanton_TTL_Script:V1.0.9 etwen/Blanton_TTL_Script:V1.0.8 etwen/Blanton_TTL_Script:V1.0.7 etwen/Blanton_TTL_Script:V1.0.5 etwen/Blanton_TTL_Script:V1.0.3
13 Commits
V1.1.2 ... eacb218da8
Author SHA1 Message Date
etwenandClaude Opus 5 eacb218da8 feat(ttl): Run Script 4's CPU stress as the same systemd unit 
The thermal / safety macro started mlucas-avx2 with '&', exactly as
Script B used to, so it carried the same failure: the load ended quietly
when the console went away - in the one test where a long, steady full
load is the entire point of the run.

It now uses the same mlucas-amm transient unit, and 'systemctl is-active
mlucas-amm' joins 'bgctl list' and 'jobs' in the monitor loop.

Script 4 still has no teardown section, so the matching stop stays
manual, and it is now two commands rather than one:

    blanton_tr518.sh stop
    systemctl stop mlucas-amm

Closing Tera Term no longer stops the CPU load, and 'kill $(jobs -p)'
never could reach a unit. Script A's V1.1.8 history, CLAUDE.md,
ARCHITECTURE.md and the release note all say so now; the version stays
V1.1.8.

Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_014RetWKFZFG1ZHcitQAyhwM
 2026-09-06 17:31:33 +08:00
etwenandClaude Opus 5 4648f936c7 docs: Update CLAUDE / ARCHITECTURE for V1.1.8 and add the release note 
CLAUDE.md: status to V1.1.8 / 2026-09-06; the soak loop now prints
'systemctl is-active mlucas-amm'; hammer/ added to the folder list with
why it is not in git; the --runtime gotcha notes the new 3600 default;
three new gotchas - kill_all_process.ttl cannot reach a systemd unit, a
missing config.ttl variable aborts the macro rather than reading as 0,
and the log timestamp FORMAT lives in TERATERM.INI, not in the script.

ARCHITECTURE.md: hammer/ and the config.ttl knobs in the project tree;
Script A ref V1.1.7 -> V1.1.8; Script B and Script C rows rewritten for
the systemd unit; constraint 1 notes that mlucas-amm now outlives the
session; two new constraints (17 - whoever moves a stress job to systemd
owns the matching stop, and Script 4 still uses '&'; 18 - config.ttl
completeness and the TERATERM.INI timestamp format); the git tag
checkbox to V1.1.8; and three known issues - the bundle no longer ships
hammer/, mlucas-amm's '~' depends on systemd's environment, and the
three stress durations are deliberately different lengths.

Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_014RetWKFZFG1ZHcitQAyhwM
 2026-09-06 17:22:00 +08:00
etwenandClaude Opus 5 9cdd651d79 feat(ttl): Run the CPU stress as a systemd unit, and add two config knobs 
mlucas-avx2 was backgrounded with '&' in the login shell, so it belonged
to that one terminal. Close Tera Term, drop the console, or reconnect on
a different session and the load was gone - and 'jobs' from the new
session showed nothing to say so. A multi-day soak could spend most of
its length with an idle CPU while the thermal numbers looked fine.

Script B now starts it as a transient unit:

  systemd-run --unit=mlucas-amm --property=Type=exec \
    --property=Restart=always --property=RestartSec=2 ...

The log is truncated once with '>' before the unit starts and appended
with '>>' inside it, so a restart adds to the run instead of erasing it.
'systemctl is-active mlucas-amm' now sits beside 'jobs', both in the
one-shot check and in every pass of the monitor loop. The old '&' line is
kept commented out above the new one to fall back to.

Script C has the matching stop. utils/kill_all_process.ttl is only
"kill $(jobs -p)" and a systemd unit is not a shell job, so without this
the load would have run through the post-test snapshot and into the next
test - every temperature and power reading taken at full load, with
nothing in 'show interfaces status' to reveal it. mlucas_amm_log is
copied to /host/hw-eval/jobs/ with the other stress logs.

Two values move into config.ttl:

  EN_timestamp      feeds logopen's 5th argument in Script A, so the
                    per-line timestamp is a knob rather than a literal 1
  BMC_USB_RUNTIME   feeds Script B's ping unit; it was hard-coded to
                    -w 14400 (4 h), which no longer matched the soak
                    lengths the SSD and USB knobs were being set to

SSD_RUNTIME and USB_RUNTIME also go 600 -> 3600, so the shipped default
is a one hour stress rather than the ten minutes V1.1.7 went out with.
--runtime is still the job's overall limit; COUNT does not multiply it.

Script A's Version History carries the V1.1.8 entries for all of this.

Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_014RetWKFZFG1ZHcitQAyhwM
 2026-09-06 17:21:52 +08:00
etwenandClaude Opus 5 4f2f9ed090 chore(publish): Keep the mlucas binaries out of git and the bundle 
src/Script_ABC_Blanton/hammer/ is ~99 MB of unstripped mlucas ELF
binaries (avx512 / avx2 / avx / sse2 / generic-c). They come with the DUT
image, so this repo has no reason to carry them - and a binary tree that
size is permanent once committed: every clone pays for it forever.

publish.sh excluded them too, because rsync copies whatever happens to be
sitting in src/. Without the exclude the delivery bundle was ~100 MB from
a machine that had the binaries and ~200 KB from a fresh clone.

While there, usage() read a fixed line range of the header, so adding a
Version History entry pushed code into the usage text. It now reads up to
the first line of code.

Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_014RetWKFZFG1ZHcitQAyhwM
 2026-09-06 17:21:39 +08:00
etwenandClaude Opus 5 1a06367ade docs: Record V1.1.7 in Script A's history, and update CLAUDE / ARCHITECTURE 
Script A's Version History gains the reboot-cycle macro, the Script B timeout
fix, the tmp/ rule and the stress knobs.

CLAUDE.md: current status to V1.1.7, a Script 5 paragraph, tmp/ in the folder
list, and two gotchas rewritten - the timeout one now covers both restore
positions, and --runtime is described as the job's overall limit rather than
"a 24 hour ceiling". Dropped the stale "TR518 not scripted yet" line.

ARCHITECTURE.md: Script 5 in the tree and in Key Features, tmp/ in the tree,
constraint 14 extended with "copy the :label along with the goto", and two
known issues added for the parts not yet run on hardware.

Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_014RetWKFZFG1ZHcitQAyhwM
 2026-09-04 22:44:21 +08:00
etwenandClaude Opus 5 1fbdcc23d6 feat(reboot): Add a standalone reboot-cycle macro 
5_Blanton_Script_Reboot_Cycle.ttl loops: login -> sudo -i -> date -s -> fan
speed -> wait_init -> Check Pt1..Pt13 -> show uptime -> reboot -> wait for the
next boot. The cycle number is printed in the banner of every round.

Like Script 4 it is standalone: it does not chain to A -> B -> C and does not
use hw-test-session. Every cycle is a fresh boot, so there is nothing to carry
over and nothing to tear down.

The cdc_ncm probe was copied out of Script B without its :skip_ping label, so
'goto skip_ping' had no target. Tera Term does not check labels at load time -
it raises the error only when it actually jumps, i.e. only when the NCM
interface is missing, which is exactly the run where something is already
wrong. The label is now there, and timeout is restored BEFORE the branch so
one line covers both paths: the ping block waits on a 'sleep 10', already two
thirds of the 15 s cap on a loaded DUT.

Dmesg_i2c and PCIE Error Counters both announced themselves as Check Pt12;
the second is now Pt13.

Not verified on hardware yet. Two things to confirm on the bench: that
wait "Booting in blind mode" really appears in this build's boot output (it
has no timeout guard, so a changed string waits forever), and that re-running
bmc-first-enroll every cycle is safe.

Also ignore tmp/ - scripts not yet run on a DUT stage there, so an unverified
script cannot reach the publish bundle where the tester cannot tell it apart
from the rest.

Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_014RetWKFZFG1ZHcitQAyhwM
 2026-09-04 22:44:21 +08:00
etwenandClaude Opus 5 0d2faef565 feat(scriptb): Move the stress durations into config.ttl, and restore the timeout sooner 
SSD_RUNTIME / SSD_COUNT and USB_RUNTIME / USB_COUNT replace the values that
were hard-coded in Script B, so a site changes them in one place. COUNT is
passed straight through as --passes.

--runtime is the job's OVERALL limit, not a per-pass one: qfx5252-stress-*
stops after RUNTIME seconds whatever --passes says. RUNTIME 600 is a ten
minute stress, not 600 x COUNT. A 24 hour soak needs RUNTIME 86400.

Also restore timeout = 0 on the cdc_ncm success path. It was restored only at
:skip_ping, which the success path reaches several waits later - until then
every wait gave up after 15 s instead of blocking, and a wait that returns
without eating the prompt puts the macro a beat ahead of the DUT.

Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_014RetWKFZFG1ZHcitQAyhwM
 2026-09-04 22:44:05 +08:00
etwenandClaude Opus 5 a9c56ee1d4 feat(multiphase): Add a way back from a margin without a power cycle 
blanton_multiphase_margin.sh gains 'normal', which returns all 38 rails
to their nominal set point from tools/Multiphase_Normal.txt. Same rails,
same per-rail reporting, same -u 0|1|all as the margin profiles.

Until now the tool could apply high3/low3/comboA/comboB and commit with
save, but had no way to undo. That left a power cycle as the only exit -
and worse, a save run while still margined would have written the offsets
into NVM, which a power cycle does not undo either.

Emitted commands were diffed against the source file: argv identical.

The nominal labels in the source carry extra text ("0.900V (nominal)",
"0.8V(nominal) , 0.8591V with load line"); the per-rail line prints just
the voltage so the column matches the other profiles. The load-line note
is kept as a comment above the data block, because reading 0.859 V back
from TH6_CORE after 'normal' looks like a failed write and is not one.

Script A -> V1.1.7.

Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_014RetWKFZFG1ZHcitQAyhwM
 2026-09-04 09:23:25 +08:00
etwenandClaude Opus 5 78a8f641c9 fix(scriptc): Capture the BMC USB service log to a file, not the console 
journalctl now runs with -o short-iso into log/bmc_usb_net.log and is
copied into the job directory with the other monitor logs. rm -f first so
the file covers this run only, and the ISO timestamps line up with
mgmt_ping.log and nfc_poll.log for cross-referencing.

The cost, recorded rather than glossed over: it is no longer echoed to
the console, so the USB copy is the only copy. That cp return value is
not checked - the same shape as the nfc_polling.log filename bug, which
failed silently and was only noticed back at the desk with a job archive
missing a file.

Folded into V1.1.6 rather than bumping: the tag has not moved on and this
is the same delivery.

Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_014RetWKFZFG1ZHcitQAyhwM
 2026-09-02 21:44:06 +08:00
etwenandClaude Opus 5 25e1ce0068 fix(pdb): Read the bricks on the pages the datasheet actually specifies 
Every PDB reading came back NA, and the cause was a base error. The four
ADPM12200 bricks put each measurement on its own PMBus PAGE, written
before the read. The bring-up spreadsheet listed those page numbers in
decimal but with an 0x prefix:

    Vin  PAGE 9  -> it said 0x00   (0x09)
    Iin  PAGE 10 -> it said 0x10   (0x0A)
    Vout PAGE 2  -> it said 0x02    correct by luck
    Iout PAGE 14 -> it said 0x14   (0x0E)
    Temp PAGE 18 -> it said 0x18   (0x12)

Only Vout worked, because 2 reads the same in either base. Hence Iin and
Iout answering 0xFFFF, Temp answering 0x0000, and a Vin scale factor
having to be invented to make 50 V appear out of a page-0 register.

pwr_brick.sh reads all five bricks with the right pages and the
datasheet's DIRECT equation, X = (1/m)(Y x 10^-R - b): voltage Y x 8 mV,
current Y x 0.04 A, temperature Y x 0.01 C. Cross-checked rather than
assumed - READ_VOUT 0x05D4 decodes to 11936 mV, exactly what
'show platform voltage' reports for that rail through a separate sensor
path. The datasheet is committed alongside so the numbers are checkable.

Left flagged: Table 3 does not list READ_VIN or READ_IIN. They borrow the
voltage and current coefficients here, which is consistent with a ~50 V
input but is not something the datasheet states.

Each value is re-read until it passes three checks: not 0xFFFF, not
0x0000, and inside a plausibility window. The window is the one that
matters - this bus corrupts the HIGH BYTE only, which turns 11.98 V into
32.00 V. Positive, plausible in magnitude, and invisible to any all-ones
filter. 0x0000 is rejected for the mirror-image reason: on the
temperature register it decodes to a believable 0 C.

Adds comboA/comboB margin profiles per board. comboB is comboA with every
direction flipped, so the pair covers each rail high and low while its
neighbours sit the other way. NC channels stay nominal in both - there is
nothing to margin on an unused rail.

Script C re-enables the BMC USB journalctl dump, which had been commented
out, so that service log now reaches the master log.

Script A -> V1.1.6.

Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_014RetWKFZFG1ZHcitQAyhwM
 2026-09-02 16:35:45 +08:00
etwenandClaude Opus 5 215fed6e95 fix(stress): Keep the SSD and USB jobs alive for the whole soak 
qfx5252-stress-usb was started with --runtime 60. It finished a minute
into an overnight run and the USB path sat idle for the rest of the
night - nothing failed, nothing said so, and the log looked complete.
SSD had the same shape at --runtime 3600. Both are now 86400, and the
BMC DDR memtester drops its loop count so it runs until stopped.

86400 is 24h, not forever. Past that SSD and USB die quietly and the
only clue is the shorter bgctl list Script B already prints each round.
Said so in the version history, the release notes and ARCHITECTURE.

Adds blanton_multiphase_margin.sh: the multiphase controllers on both
switch boards over the native i2c buses (SWB0 on i2c-13/15, SWB1 on
-14/-16), 19 rails each. high3/low3/comboA/comboB set voltages and print
one line per rail; save commits them and prints Multiphase Save All,
because that list has no per-rail mapping to report against.

Two hazards it carries: save is STORE_USER_ALL and permanent, and these
are NOT the LTC2980s margin.sh drives - the two tools reach the same
rails from opposite sides with no interlock between them.

The emitted commands were diffed against tools/Multiphase_*.txt: argv
identical for all five. The rail-to-netname mapping was cross-checked
against the bus numbers rather than trusted by line position - blocks
1..19 are all bus 13/15 and 20..38 all 14/16, matching the SWB0/SWB1
split of Multiphase_Netname.

blanton_traffic_linespeed v0.7.0 appends PatternRandom=yes to every tx
including ce0, and the defaults become tx 200 length=324. A fixed
pattern can sit on a benign bit sequence for a whole run; a changing one
is what exposes a weak lane. -r no forces fixed, -r "" omits the
argument for an SDK that will not take it. Bytes per burst went 51200 ->
64800, so absolute counter totals do not carry across this build - the
pair cross-check that decides PASS/FAIL does.

Script A -> V1.1.5.

Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_014RetWKFZFG1ZHcitQAyhwM
 2026-09-01 11:04:45 +08:00
etwenandClaude Opus 5 db44f72352 feat(thermal): Add a standalone thermal/safety run, and move margin out of the soak loop 
4_Blanton_Script_thermal_safety.ttl brings the DUT up the way Script A
does, then loads it - mlucas-avx2 -cpu 0:15 in the background plus
blanton_tr518.sh start - and samples platform data and both switch
boards' rail power every minute. Power per rail under sustained full
load, over hours, is the whole point of it.

It is standalone: nothing starts it, it starts nothing, and it must not
share a DUT with Script B because both take over the cd ports.

It also has no teardown. When you interrupt it the unit is still in
port cd lb=mac / l2 learn off / test mode nr=yes and mlucas is still
running, and show interfaces status does not reveal any of that. Called
out in the version history, the release notes, CLAUDE.md gotchas and the
ARCHITECTURE future-work list, because whoever uses the box next will not
find out on their own.

Script B's per-round loop drops the margin scan. The loop is meant to be
a quick minute-by-minute sample and margin_status_all.sh walks nine
LTC2980s over I2C, which dominated the round. Script C takes it instead,
once, before show uptime. The trade-off is real: margin drift DURING the
soak is no longer visible, only a start and an end reading. Documented
rather than glossed over, with a suggestion (scan every N rounds) if it
needs to come back.

Script C also sends exit and waits for "Script done" before
hw-test-session finish, so finish runs in the login shell rather than
inside the session it is closing.

Adds docs/Blanton_Test_Flow.drawio: all four scripts side by side, with
the config flags that change each step marked, Script B's one real goto
drawn, and the A->B->C handoffs shown as the manual steps they are.

The new script arrived LF-only while every other .ttl is CRLF and
.gitattributes marks *.ttl as -text, so what is committed is exactly what
Tera Term reads. Converted.

Script A -> V1.1.4.

Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_014RetWKFZFG1ZHcitQAyhwM
 2026-08-31 22:19:38 +08:00
etwenandClaude Opus 5 9cc41f6fbd fix(margin): Reference VNOM to what the rails run at, and split profiles per CONN 
86 of the 144 margin channels moved up +0.8% .. +2.5% to the measured
median for this platform (3.3 -> 3.38, 0.9 -> 0.915, 0.8 -> 0.82, ...).

That is not a display change. VNOM is the denominator of margin_status'
deviation %, and it is also the basis margin_set derives high/low/OV/UV
from - so both the number you read and the voltage you apply move with
it. A rail steady at 0.756 V used to read +0.80% against a nominal 0.75
and now reads 0.00%. Margin logs from before and after cannot be
compared: the reference moved, the hardware did not.

comboA/comboB are replaced by combo_SWB_CONN13..16_{high,low}. The
per-channel percentages are positional, so they follow the rails of one
specific board - applying a CONN13 profile to a CONN16 margins the wrong
rails and nothing detects it. SWB0 and SWB1 share a profile per CONN
because their rails are identical.

Fixes two things the deletion broke:
  - margin_apply_profile_all.sh still named comboA for all nine boards,
    which would now stop at "Profile not found" nine times over. It names
    the matching per-CONN profile instead, with CB on the generic
    combo_high3, and a note that the low pass is _high -> _low.
  - docs/LTC2980_channel_map.csv is generated from settings/*.conf, so
    all 86 changed rails were stale in it. Regenerated.

The eight new profiles also still carried comboA's header comment
("alternating high/low"), which describes neither what they contain nor
what they are for.

Script A -> V1.1.3.

Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_014RetWKFZFG1ZHcitQAyhwM
 2026-08-30 22:13:43 +08:00
60 changed files with 4926 additions and 275 deletions
Expand all files Collapse all files
.gitignore
+6
View File
@@ -28,3 +28,9 @@ publish/*
# 客戶板 schematic 原始檔（機密，勿入 repo）
*.DSN
*.dsn
# 尚未上機驗證的腳本暫存區（不入 repo，測過再搬進 src/）
tmp/
# mlucas 的 ELF binary（~99 MB），DUT image 已內含，不入 repo
src/Script_ABC_Blanton/hammer/
ARCHITECTURE.md
+114 -12
View File
@@ -112,7 +112,7 @@ Blanton_TTL_Script/
│
├── CLAUDE.md # 專案記憶 & 給 Claude 的指令
├── ARCHITECTURE.md # 本架構文件
├── .gitignore # secret/ + For_AI/ + logs + publish 產出
├── .gitignore # secret/ + For_AI/ + tmp/ + hammer/ + logs + publish 產出
├── .gitattributes # 換行符政策：.sh/.conf 釘 LF、.ttl 保持 CRLF
│
├── docs/ # 規格與狀態文件（客戶提供 / 專案產出）
@@ -120,6 +120,8 @@ Blanton_TTL_Script/
│ ├── Blantons_FPGA_Registers_draft.docx # 同上，客戶原始 docx
│ ├── Blantons_FPGA_Registers_Map_draft.xlsx
│ ├── Blantons_PCIe_AER_and_DDR_EDAC_checks.pdf # AER / EDAC 檢查點依據
│ ├── ADPM12200CMLZxx_DS_Datasheet_*.pdf # PDB brick 手冊（PAGE 與 DIRECT 係數的來源）
│ ├── Blanton_Test_Flow.drawio # A/B/C + 熱安規四支的測試流程圖（draw.io）
│ ├── LTC2980_channel_map.csv # 9 個 settings/*.conf 合併：Board,CONN,Ch,NetName,Vnom（144 列）
│ ├── TTL_Script_Blanton_Status_20260814.xlsx
│ └── TTL_Script_Blanton_Status_20260817.xlsx # ⭐ 最新：三支腳本逐項 Status（OK / On-Going + Owner）
@@ -134,6 +136,8 @@ Blanton_TTL_Script/
│ ├── 100G_PRBS.txt # 100G PRBS 原始指令（port_prbs_monitor.sh 的來源）
│ ├── TR518.txt # 內建封包測試 tr 518 → blanton_tr518.sh
│ ├── BER_Test.txt # 全機 PRBS BER 指令 → blanton_ber.sh
│ ├── Multiphase_{high3,low3,comboA,comboB,Save}.txt # → blanton_multiphase_margin.sh
│ ├── Multiphase_Netname # 38 條軌的 net 名稱（區塊順序對應）
│ ├── 100G_Traffic.txt # ce0 VLAN 138 打流 → blanton_traffic_linespeed.sh
│ ├── fan_ctrl.txt # MAX31790 unbind/bind + fan-speed-control.sh 30
│ └── gen_channel_map.sh # settings/*.conf → docs/LTC2980_channel_map.csv（需 gawk）
@@ -149,10 +153,18 @@ Blanton_TTL_Script/
│ ├── publish.sh # ✅ committed — 打包工具（版號讀 Script A 檔頭）
│ └── Script_ABC_Blanton_<Ver>/ # 🚫 產出，gitignored（-z 另出同名 .zip）
│
├── tmp/ # 🚫 gitignored — 尚未上機驗證的腳本暫存區
│ └── blanton_reboottest.sh # 5_..._Reboot_Cycle.ttl 的 bash 版，測過再搬進 Blanton_Script/
│
└── src/
└── Script_ABC_Blanton/ # ← Tera Term 的工作目錄（整包給測試員）
│
├── config.ttl # 全域設定：testcase 名、EN_Margin / EN_log、三個 prompt 字串
├── 4_Blanton_Script_thermal_safety.ttl # 熱 / 安規：獨立跑，不接 A→B→C
├── 5_Blanton_Script_Reboot_Cycle.ttl # 重開機循環：獨立跑，while 1 無止境（未上機驗證）
├── config.ttl # 全域設定：testcase 名、EN_Margin / EN_log / EN_timestamp、
│ # 風扇與 SWB 宣告、SSD/USB/BMC_USB 壓力秒數、三個 prompt 字串
├── hammer/ # 🚫 gitignored — mlucas ELF binary（~99 MB），DUT image 自帶，
│ # publish.sh 也排除；Script B / Script 4 只負責 chmod +x 後執行
├── 1_Blanton_Script_A.ttl # Pre-test：登入 → 對時 → source 工具 → 清 AER → 抓基線
├── 2_Blanton_Script_B.ttl # Stress：開壓力程序 → while 1 每輪抓 fan/temp/margin
├── 3_Blanton_Script_C.ttl # Post-test：kill → 再抓一次 → 比對 stress log
@@ -188,6 +200,8 @@ Blanton_TTL_Script/
│ # eth0→TARGET_10G、eth1→TARGET_1G，兩張卡同時持續 ping
├── port_prbs_monitor.sh # 100G uplink PRBS 測試（bcmcmd phy diag）
├── blanton_ber.sh # 全機 SerDes BER 掃描（phydiag prbs / prbsstat）
├── blanton_multiphase_margin.sh # 多相 VRM margin（原生 i2c，38 條軌）
├── pwr_brick.sh # PDB / CPB power brick 讀值（VI2C ch4）
├── nfc_polling.sh # NFC tag 背景輪詢 + PASS/FAIL 統計
├── blantons_nfc_validate.py # NFC/NCI 驗證工具（廠商提供，未修改）
├── blanton_tr518.sh # TR518 封包測試，量功耗前的負載來源
@@ -202,7 +216,10 @@ Blanton_TTL_Script/
├── margin.sh # margin_init/status/set/apply_profile/save
# # v2.7.0：margin_save all / margin_save blanton
├── settings/*.conf # 一個 .conf = 一顆 LTC2980（CB + SWB0/1 × CONN13~16）
├── profiles/*.conf # 16-ch 批次組合（comboA/B、high3/5、low3/5、normal、off）
├── profiles/*.conf # 16-ch 批次組合。SWB 為 per-CONN：
# # combo_SWB_CONN13~16_{high,low}（百分比對應該片的軌）
# # comboA/comboB_{CB,SWB_CONN13~16}（互補棋盤配對）
# # 通用：high3/5、low3/5、normal、all_off
├── script/*_all.sh # 跨 9 顆 LTC2980 的批次 status / apply / save
├── Ref/margin_command_trace.md # 指令追蹤參考（SWB 章節已標過期，見文件內警告）
└── logs/ # margin 操作 log
@@ -243,11 +260,20 @@ Log 檔名規則：`<mdir>\Logs\<project_name>_<strTestcase>_<YYYYmmdd-HHMMSS>.l
| `CB_I2C_CH` | int | `TRANSPORT="swb"` 時的 FPGA I2C 通道（6/7/8/9） |
| `CHIPS[]` | string[2] | `"bus:addr"`，index 0 → CH0~7、index 1 → CH8~15 |
| `CHIP_PRE_CMD[]` / `CHIP_POST_CMD[]` | string[1] | mux 切換等前後置指令，`;` 分隔多筆 |
| `CH<n>_VNOM` | string | 標稱電壓（`"-"` = 未使用 / NC） |
| `CH<n>_VNOM` | string | 這條軌的**基準電壓**（`"-"` = 未使用 / NC） |
| `CH<n>_NET` | string | 電路 net name（對照 schematic） |
Channel 定址：`ch / 8` → `CHIPS[]` index，`ch % 8` → LTC2977 PMBus PAGE（0x00~0x07）。
**`VNOM` 自 2026-08-30 起是「Blanton 實測中位數」，不是規格標稱值。** 144 條軌裡有 86 條
被改上去 +0.8% ~ +2.5%（例：`PVDD3_3V_SYNTH_LDO_*` 3.3 → 3.38、`P0V9_AVDD_*` 0.9 → 0.915、
`PVDD0_8V_T3` 0.8 → 0.82）。這件事影響兩處，**不是只有顯示**：
- `margin_status` 的偏差 % 是對 `VNOM` 算的 —— 以前一條穩定在 0.756 V 的軌顯示 `+0.80%`，
現在顯示 `0.00%`。**舊 log 的偏差 % 不能跟新 log 直接比。**
- `margin_set` 的 high / low / OV / UV **全部由 `VNOM` 推算**（`VNOM × (1 ± change%)`），
所以整個 margin 視窗跟著平移。同樣下 `+3%`，實際打到的絕對電壓比以前高。
**SWB 通道與位址對應（2026-08-19 上機驗證，`ababb2c`）：**
| FPGA I2C 通道 | 板 / 接頭 | LTC2977 位址（lo / hi） |
@@ -344,16 +370,19 @@ PROFILE_CHANNELS=( "0:high:8" "1:low:8" ... ) # "channel:operation:change_perc
| 模組 | 進入點 | 功能 |
|------|--------|------|
| **Script A（Pre-test）** | `1_Blanton_Script_A.ttl` V1.1.2 | root 登入 → `date -s` 對時 → 清 job log → **收掉前一輪殘留**（`hw-test-session finish` → `bgctl reset --yes` → `bgctl stop --all` → `bgctl list` 確認清空）→ `hw-test-session start` → **設定風扇轉速** → **等資料面就緒**（`wait_init.ttl`）→ DUT 清單（boot/version/fwutil/syseeprom/ssdhealth/TPM/NVMe）→ BMC enroll + version/status → source bash 工具 → 清/讀 7 組 PCIe AER + `ras-mc-ctl --summary` → `lspci` → margin → PMON → dmesg → **10G/1G 管理網路 ping** → **NFC 基線**（start → 30s → stop → report）→ 100G uplink 設定與狀態 → **一輪流量基線** → `show uptime` |
| **Script B（Stress）** | `2_Blanton_Script_B.ttl` | `mlucas-avx2 -cpu 0:15` + `bgctl run` 的 `memtester` / SSD / USB 壓力 + BMC DDR（`bmc-manager run memtester`）→ BMC USB net test（探測 cdc_ncm 介面，`systemd-run` 掛 4 小時 ping）→ 啟動 mgmt ping 監控 → **啟動 NFC 輪詢** → `jobs` / `bgctl list` → traffic（依 `SWB_UNIT`）→ `while 1` 每輪完整 PMON + margin |
| **Script C（Post-test）** | `3_Blanton_Script_C.ttl` | `kill $(jobs -p)` + `bgctl stop --all` / `reset` + 停 BMC USB unit、mgmt ping 與 **NFC 輪詢** → PMON + dmesg → 7 組 AER + `ras-mc-ctl` → BMC USB `journalctl` → `ip -s link show eth0/eth1` → `cat` mlucas log → **NFC `report`** → traffic `stop` + `report` → **BER 掃描**（依 `SWB_UNIT`）→ NVMe 健康 → `show reboot-cause` / `uptime` → **job log 複製到 USB（帶時戳）** → `hw-test-session finish` |
| **SWB loopback 流量** | `blanton_traffic_linespeed <sub> [-u 0\|1\|all]` | `init`（VLAN 30..137，成對 `cdN`/`cdN+32`）→ `clear` → `start`（`tx 100 length=512`）→ `stop` → `report`（per-pair TX/RX 交叉比對 PASS/FAIL）；另有 `ps`（link/speed）與 `run`（一條龍）。**V0.6.0 起含 100G uplink `ce0`**（VLAN 138）：它沒有 loopback 對象，靠 **ingress mirror 打回自己**維持循環，`report` 最後一列就是它，底下再接一份跨 unit summary |
| **Script A（Pre-test）** | `1_Blanton_Script_A.ttl` V1.1.8 | root 登入 → `date -s` 對時 → 清 job log → **收掉前一輪殘留**（`hw-test-session finish` → `bgctl reset --yes` → `bgctl stop --all` → `bgctl list` 確認清空）→ `hw-test-session start` → **設定風扇轉速** → **等資料面就緒**（`wait_init.ttl`）→ DUT 清單（boot/version/fwutil/syseeprom/ssdhealth/TPM/NVMe）→ BMC enroll + version/status → source bash 工具 → 清/讀 7 組 PCIe AER + `ras-mc-ctl --summary` → `lspci` → margin → PMON → dmesg → **10G/1G 管理網路 ping** → **NFC 基線**（start → 30s → stop → report）→ 100G uplink 設定與狀態 → **一輪流量基線** → `show uptime` |
| **Script B（Stress）** | `2_Blanton_Script_B.ttl` | **V1.1.8 起 `mlucas-avx2 -cpu 0:15` 由 `systemd-run --unit=mlucas-amm`（`Type=exec`、`Restart=always`）啟動，不再是 shell 的 `&` 背景 job** + `bgctl run` 的 `memtester` / SSD / USB 壓力（v1.1.7 起 SSD/USB 的 `--runtime`/`--passes` 讀 `config.ttl` 的 `SSD_RUNTIME`/`SSD_COUNT`、`USB_RUNTIME`/`USB_COUNT`；BMC memtester 不帶次數 = 跑到被停） + BMC DDR（`bmc-manager run memtester`）→ BMC USB net test（探測 cdc_ncm 介面，`systemd-run` 掛 `BMC_USB_RUNTIME` 秒的 ping，V1.1.8 前寫死 4 小時）→ 啟動 mgmt ping 監控 → **啟動 NFC 輪詢** → `jobs` / `systemctl is-active mlucas-amm` / `bgctl list` → traffic（依 `SWB_UNIT`）→ `while 1` 每輪 PMON + `bgctl list`/`jobs`/`systemctl is-active mlucas-amm` + `pause 60`（**V1.1.4 起 margin 不在迴圈內**）|
| **Script C（Post-test）** | `3_Blanton_Script_C.ttl` | `kill $(jobs -p)` + **`systemctl stop mlucas-amm`**（systemd unit 不是 shell job，`jobs -p` 抓不到）+ `bgctl stop --all` / `reset` + 停 BMC USB unit、mgmt ping 與 **NFC 輪詢** → PMON + dmesg → 7 組 AER + `ras-mc-ctl` → BMC USB `journalctl` **寫進 `log/bmc_usb_net.log`**（不再印在 console） → `ip -s link show eth0/eth1` → `cat` mlucas log（並 `cp` 進 job 目錄一起帶走）→ **NFC `report`** → traffic `stop` + `report` → **BER 掃描**（依 `SWB_UNIT`）→ NVMe 健康 → `show reboot-cause` → **margin 掃描**（`EN_Margin`，V1.1.4 由 Script B 移來）→ `uptime` → **job log 複製到 USB（帶時戳）** → `exit` + wait『Script done』→ `hw-test-session finish` |
| **Script 4（Thermal / Safety）** | `4_Blanton_Script_thermal_safety.ttl` | **獨立腳本，不接 A→B→C。** Script A 式的環境建立（登入 / session / 風扇 / `wait_init` / DUT 清單 / BMC / PCIe 清除 / `pcie_bus` / PMON / dmesg）→ **滿載**（`mlucas-avx2 -cpu 0:15`，V1.1.8 起與 Script B 同樣掛成 `mlucas-amm` systemd unit + `blanton_tr518.sh start`）→ `while 1`：PMON + `TH6_SWB0/1_power_readback.sh` + `bgctl list` / `jobs` / `systemctl is-active mlucas-amm`，`pause 60`。**沒有收尾段** —— 中斷後 DUT 仍在 `port cd lb=mac` / `l2 learn off` / `test mode nr=yes`，且 CPU 仍滿載，要手動 `blanton_tr518.sh stop` + `systemctl stop mlucas-amm` |
| **Script 5（Reboot Cycle）** | `5_Blanton_Script_Reboot_Cycle.ttl` | **獨立腳本，不接 A→B→C。** `while 1`：登入 → `sudo -i` → 對時 → 風扇 → **Check Pt1~Pt13**（DUT/BMC info、mgmt ping、NFC、SSD、USB、BMC USB、port status + 15s traffic、BER、NVMe、platform data、dmesg i2c、PCIe error counters）→ `show uptime` → `reboot` → `wait "Booting in blind mode"`。`cnt_cycle` 每輪 +1 印在標頭。**沒有結束條件** —— 要停就關掉 Tera Term 的 macro。**尚未上機驗證** |
| **SWB loopback 流量** | `blanton_traffic_linespeed <sub> [-u 0\|1\|all]` | `init`（VLAN 30..137，成對 `cdN`/`cdN+32`）→ `clear` → `start`（`tx 200 length=324 PatternRandom=yes`，v0.7.0 起）→ `stop` → `report`（per-pair TX/RX 交叉比對 PASS/FAIL）；另有 `ps`（link/speed）與 `run`（一條龍）。**V0.6.0 起含 100G uplink `ce0`**（VLAN 138）：它沒有 loopback 對象，靠 **ingress mirror 打回自己**維持循環，`report` 最後一列就是它，底下再接一份跨 unit summary |
| **FPGA 暫存器存取** | `cb_fpga <fn> <addr> [data]`、`fpga_rescan` | pcimem 打 `resource0` + BAR 相對 offset，32-bit word；BDF 於 source 時自動偵測；`pmc/icb/swb0/swb1_fpga` 走 VSPI 窗口 |
| **CB I2C / PMBus** | `cb_i2c_init/scan/read/write`、`cb_pmbus_read/write/linear16` | FPGA F3 OpenCores master，**讀用 Repeated START**（SMBus/PMBus 裝置必需） |
| **ICB / PDB 存取** | `vi2c_init/scan/read/write`、`vi2c_scan_all` | CB F3 VI2C proxy，~3.3 ms/reg，取代 VSPI 的 ~18 ms/reg（後者會踩 SMBus 25–35 ms timeout） |
| **溫度** | `temp_cb` / `temp_icb` / `temp_all` | TMP75（12-bit 左靠齊 ×0.0625）、TMP432（含 RANGE bit 的 −64 偏移、remote1/2） |
| **電源資料** | `pwr_data` / `pwr_data_pdb` / `pwr_pdb_id` | SWB VRM 全軌 Vin/Vout/Iout/Temp 對齊表；MP29816 解析度**執行期從 `MFR_VOUT_SCALE_LOOP` 讀**，不寫死 |
| **電壓 Margin** | `margin_init/status/set/apply_profile/save` + `*_all.sh` | 9 顆 LTC2980（CB CONN13、SWB0/1 CONN13~16）批次 high/low margin 與狀態掃描。v2.6.0 起 SWB 路徑真正接上共用 cb_i2c 後端，並有 `margin_swb_info/probe/scan/reset/sem` 除錯包裝 |
| **電壓 Margin** | `margin_init/status/set/apply_profile/save` + `*_all.sh` | 9 顆 LTC2980（CB CONN13、SWB0/1 CONN13~16）批次 high/low margin 與狀態掃描。`VNOM` 為 Blanton 實測中位數（2026-08-30）；SWB 的 profile 是 per-CONN，套錯 CONN 會 margin 到錯的軌且不報錯。v2.6.0 起 SWB 路徑真正接上共用 cb_i2c 後端，並有 `margin_swb_info/probe/scan/reset/sem` 除錯包裝 |
| **Multiphase VRM margin** | `blanton_multiphase_margin.sh {high3\|low3\|comboA\|comboB\|save} [-u 0\|1\|all]` | 兩片 SWB 的多相控制器（**不是** `margin.sh` 管的 LTC2980），走原生 i2c bus：SWB0 = `/dev/i2c-13`+`-15`、SWB1 = `-14`+`-16`。每片 19 條軌、共 38 條，逐條印 `SWB0_0V9_ANLG0 - 0.930V Configure Done`。`save` 沒有 per-rail 對應，只印 `Multiphase Save All`。⚠️ `save` 是 `STORE_USER_ALL`（0x15，TH6 core 用 0x17）**永久寫 NVM**；⚠️ 與 `margin.sh` 從兩側摸同一批軌，**不可同時用** |
| **Margin 寫 NVM** | `margin_save` / `margin_save all` / `margin_save blanton` | ⚠️ 永久寫入。`0x15` 送 PMBus **send-byte**（不帶 data byte）。`all` = 依 `settings/` 走 9 顆、跑完還原原本載入的板子；`blanton` = 本平台捷徑，18 顆全走原生 i2c bus（`MARGIN_BLANTON_STORE` 表），不需 `margin_init`。每筆之間 `MARGIN_STORE_SETTLE`（0.5s），工具**不 poll busy bit** |
| **管理網路 ping** | `mgmt_ping_monitor.sh {start\|stop\|status\|fg\|tail\|clear\|summary}` | 一輪 = 10G leg + 1G leg，各自 `ip address/route replace` 後 `ping -I <if>` 打自己的對端；兩張卡都保持 up。每 leg 記 `ip -s link show` 與該卡的 TX/RX packet delta，另出一行可 grep 的 `RESULT` |
| **BMC 監控** | `bmc_monitor.sh {start\|stop\|status\|fg\|tail\|clear}` | 由 host 端 `bmc-manager run` 週期取樣 `free -m`，另加一組 **I2C 寫入/讀回圖樣測試**（bus 1、addr 0x41、offset 0x00C0，寫 `55AA55AA` 讀回、再寫 `AA55AA55` 讀回）。B 啟動、C 停止並 `cat log/bmc_poll.log` |
@@ -361,6 +390,7 @@ PROFILE_CHANNELS=( "0:high:8" "1:low:8" ... ) # "channel:operation:change_perc
| **100G PRBS** | `port_prbs_monitor.sh {start [both\|a\|b]\|stop\|status\|report\|clear}` | 兩個 uplink 各一個 worker，可同時或單獨跑。setup（`lpmode off` → `prbs set` → `prbsstat STArt`）→ 週期 `prbs get`（判定）+ `prbsstat Ber`（只記錄）→ teardown（`STOp` + `prbs clear`）。輸出含 `PRBS OK!` 才算 PASS。**⚠️ A/B/C 的呼叫目前註解掉** |
| **SerDes BER 掃描** | `blanton_ber.sh {init\|clear\|start\|stop\|report} [-u 0\|1\|all]` | 全機每個對接 port 的 PRBS BER：`prbs set p=3` + `prbs get`（確認每條 lane 都鎖上）→ `prbsstat STArt Interval=30` →（等一個 interval）→ `prbsstat Ber` → `STOp` → `prbs clear`。`report` 一列一條 lane，**BER < 1e-6 才 PASS**，最後跨 unit 的 summary 帶最差 lane。⚠️ PRBS 期間 link 顯示 DOWN、不過流量 |
| **TR518 負載** | `blanton_tr518.sh {start\|stop} [-u 0\|1\|all]` | `port cd lb=mac` → `l2 learn off` → `test mode nr=yes` → `tr 518 ... testphase=1`，然後 settle `TR_SETTLE_SEC`（120s）再讓人量功耗。`stop` 只送 `port cd lb=none`（照 `TR518.txt`），L2 學習與 test mode **不會還原**，`TR_RESTORE_*=1` 才會 |
| **PDB / CPB brick** | `pwr_brick.sh show [-r]` | 5 顆 brick 的 Vin / Iin / Vout / Iout / Temp（SWB0 `0x62`/`0x63`、SWB1 `0x60`/`0x61`、CPB `0x26`）。四顆 ADPM12200 **每個量各自一個 PMBus PAGE**（Vin 9、Iin 10、Vout 2、Iout 14、Temp 18），讀之前一定要先寫 PAGE —— `blanton_pwr_data.sh` 完全沒寫，所以整張 PDB 表都是 NA。換算用手冊 DIRECT 公式 `X=(1/m)(Y×10⁻ᴿ−b)`。每個值重讀到通過三道檢查為止（非 `0xFFFF`、非 `0x0000`、落在合理範圍）—— 這條匯流排**只壞高位元組**，`11.98 V` 會變成 `32.00 V`，全一過濾擋不住 |
| **SWB 軌功耗** | `TH6_SWB{0,1}_power_readback.sh` | 讀 `show platform voltage/current` **各一次**，19 條軌 V×I 與總功耗。舊版每軌各讀一次（38 次呼叫、每軌不同時刻），總和是不同瞬間的加總 |
| **NFC 讀取輪詢** | `nfc_polling.sh {start\|stop\|status\|tail\|report\|clear\|fg}` | 背景重複跑 `blantons_nfc_validate.py`，每輪追加一行機器可讀的 `RESULT=`（PASS/FAIL 取自工具自己的摘要行，兩者皆無則 **ERROR**，與 FAIL 分開計數）。`start` 會先清空 log；`report` **只讀 log，polling 中隨時可跑**，並標示 `RUNNING` 免得快照被當最終結果。`tail` **不 follow** |
| **USB 目標偵測** | `usb_target.sh [-o dev\|mnt\|both\|id] [-n] [-r sec]` | 找出插入的 USB 儲存裝置，排除 `/` 與 `/host` 的底層碟（本平台可能從 USB DOM 開機），多顆時拒絕猜；掛載時會驗證真的可寫 |
@@ -452,6 +482,8 @@ pwr_data
1. **A → B → C 必須依序跑，且 B 之後才能跑 C。** Script B 的背景 job 只存在於那個 shell session，
Script C 的 `kill $(jobs -p)` 依賴同一個 session；中途斷線就得手動收程序。
V1.1.8 起 `mlucas-amm` 例外 —— 它是 systemd transient unit，**跨 session 存活**，
所以 Script C 必須另外 `systemctl stop mlucas-amm`（見第 17 條）。
2. **A / B / C 共用同一個 log 檔**：只有 Script A `logopen`，B / C 用 `logwrite` 續寫分隔線。
跑 B/C 前若關掉了 Tera Term，log 就斷了。
3. **PCIe AER 的判定是「差值」不是「絕對值」**：Script A 抓基線、Script C 抓結果，
@@ -494,8 +526,13 @@ pwr_data
`Permission denied`、Script C 的 `cat` 撲空（BMC 段全空但不會報錯）。
14. **TTL 的 `timeout` 是全域的，設了就要還原**：`timeout = N` 之後**每一個** `wait` 都被限制在 N 秒，
逾時的 `wait` 會直接返回而沒吃到 prompt，於是下一個指令在前一個還沒跑完就送出，之後整輪錯開一拍。
`wait_init.ttl` 設 60 後還原 0；Script B 的 cdc_ncm 探測設 15，在 `:skip_ping`（兩條路徑的匯流點）還原。
加新的 `timeout` 時務必配一個 `timeout = 0`。
`wait_init.ttl` 設 60 後還原 0；Script B 的 cdc_ncm 探測設 15，成功路徑在 `endif` 之後還原、
跳過路徑在 `:skip_ping` 還原（兩處各一次）。
Script 5 抄了同一段，但它的 ping 區塊要 `wait` 一個 `sleep 10` —— DUT 一忙就逼近 15 s 上限，
所以**還原點提前到 `if` 之前**：分支之前還原，一行就涵蓋兩條路徑，`:skip_ping` 的那行留作備援。
加新的 `timeout` 時務必配一個 `timeout = 0`；**抄有 `goto` 的段落時連 `:label` 一起抄** ——
標籤沒定義 Tera Term 不會在載入時報錯，要真的跳進那條分支才會彈錯誤視窗停住整輪
（Script 5 原本就漏了 `:skip_ping`，只有抓不到 NCM 介面時才會發作，已補）。
15. **兩張管理網卡同網段時會 ARP flux**：`mgmt_ping_monitor.sh` 讓 eth0/eth1 同時 up，若兩者在同一個
/24（本專案預設 `192.168.1.99` / `.101`），對端 ARP 可能由任一張卡回應，回包落在沒送封包的那張，
量到的數字不能歸屬。`ARP_STRICT=1` 會設 `arp_ignore=1` / `arp_announce=2` 擋掉；
@@ -503,6 +540,20 @@ pwr_data
**ping 成功但 `nic_tx` 接近 0 就代表封包從另一張卡出去了**。兩張卡在不同網段時可設 0。
16. **客戶 NDA**：`docs/` 內含客戶 FPGA 規格與 schematic 衍生資訊，**本 repo 只推 NAS + Gitea，
絕不推 GitHub**。
17. **改用 `systemd-run` 起壓力工作，就要自己補停的那一行。** `utils/kill_all_process.ttl` 的內容
只有 `kill $(jobs -p)`，而 systemd unit 不是 shell job，它抓不到。V1.1.8 把 `mlucas-avx2`
搬到 `mlucas-amm` unit（好處：掉線不會停、`jobs` 看不見的問題消失、`Restart=always` 會自動拉回），
代價是 Script C 少了那行 `systemctl stop` 就會讓 CPU 滿載燒進收工量測與下一輪測試 ——
而 `show interfaces status` 之類的檢查完全看不出來。目前 `mlucas-amm` 與
`qfx5252-bmc-usb-net-test` 兩個 unit 都已在 Script C 收掉。
⚠️ **`4_Blanton_Script_thermal_safety.ttl` 用同一個 `mlucas-amm` unit，但它沒有收尾段**，
所以那行 `systemctl stop mlucas-amm` 必須由測試員手動下 —— 這是 Script 4 目前
唯一一個「不下就會延續到下一輪」的負載。
18. **`config.ttl` 少一個變數會讓 macro 當場中止**，不是當成 0。V1.1.8 新增 `EN_timestamp`
（Script A `logopen` 的第 5 個參數）與 `BMC_USB_RUNTIME`（Script B 的 ping unit）。
只更新 `.ttl` 卻沿用舊的 `config.ttl`，Script A 會停在 `logopen` 那一行。
另外 **時間戳的「格式」不在 macro 裡** —— 它在 Tera Term 的
Setup → Additional settings → Log，存在那台電腦的 `TERATERM.INI`，會跟著 PC 而不是跟著腳本走。
---
@@ -736,7 +787,7 @@ margin status、全部 VRM 軌的 Vin/Vout/Iout/Temp、CB + ICB 溫感讀值，
- [ ] `CHANGELOG.md`：延續三支腳本頂端的 Version History，集中成一份
- [ ] 三支腳本的 header 版號與 `CHANGELOG.md` 對齊，`config.ttl` 加 `script_version` 並寫進 log 開頭
- [ ] `docs/TTL_Script_Blanton_Status_*.xlsx` 更新為全 OK，或把剩餘項目移進 Future Extensions
- [ ] 打 git tag `v1.1.0`，push `nas` + `gitea`
- [x] 打 git tag，push `nas` + `gitea`（已至 `V1.1.8`；`publish/` 依 Script A 檔頭版號打包）
**驗收條件：** 從 zip 解壓到一台乾淨的測試 NB，照 README 操作，不看原始碼就能完成一輪 A→B→C
並產出 summary；`publish/` 內容與 git tag 一致。
@@ -778,6 +829,23 @@ margin status、全部 VRM 軌的 Vin/Vout/Iout/Temp、CB + ICB 溫感讀值，
複製到 USB。要確認 `bgctl` 的產出結構，必要時改成 `rm -rf .../jobs/*`。
- **100G PRBS 尚未接進 A/B/C**：`port_prbs_monitor.sh` 已隨包交付、可手動執行，但三支腳本裡的呼叫
都還註解著（bring-up 中）。要啟用時記得 PRBS 期間 link 會顯示 down，`stop` 之後才會回來。
- **Script 5（Reboot Cycle）尚未上機驗證**：`5_Blanton_Script_Reboot_Cycle.ttl` 隨 V1.1.7 交付，
但還沒在真 DUT 上跑過一輪完整循環。兩個要現場確認的點：`wait "Booting in blind mode"` 是否
真的在每一版開機訊息裡出現（沒出現就會永遠等下去，而且沒有 `timeout` 保護）；以及每輪重跑
`bmc-first-enroll` 是否安全。**沒有結束條件**，測夠了要自己關掉 macro。
- **`tmp/blanton_reboottest.sh`（bash 版重開循環）也未上機驗證**：不用 Tera Term、由 systemd 在
每次開機跑一輪並自動 `reboot`，登入下 `stop` 才停。整個 `tmp/` 是 gitignored，**不會進交付包** ——
驗證過再搬進 `Blanton_Script/`。未驗證的腳本混進 `Blanton_Script/` 之後，測試員分不出哪支能信。
- **交付包不含 `hammer/`，但 Script B 與 Script 4 都要用它**：V1.1.8 起 `hammer/` 是 gitignored
且被 `publish.sh` 排除（~99 MB 的 mlucas binary，進 git 就永久留在 history）。這是刻意的 ——
binary 由 DUT image 帶 —— 但代表**測試員解開交付包後 `~/hammer` 必須已經在 DUT 上**，
否則 Script B 會在 `chmod +x ~/hammer/tools/amd/mlucas-avx2` 那一行失敗，而且 macro 不會停，
接著的 `systemd-run` 只是起一個立刻失敗又被 `Restart=always` 反覆重拉的 unit。
上機前先 `ls ~/hammer/tools/amd/mlucas-avx2` 確認一次。
- **`mlucas-amm` 的 `~` 依賴 systemd 的環境**：unit 是
`/bin/bash -c '~/hammer/... >> ~/hammer/mlucas_amm_log'`，system service 沒有 `User=` 時 systemd
**不會設 `HOME`**，bash 才退回 passwd 的家目錄（root → `/root`）解出同一條路徑。目前會通，
但那是剛好對上而不是保證；改成絕對路徑 `/root/hammer/...` 就不用賭。**尚未上機驗證。**
- **Script C 的 USB 掛載走 `mount` 而非 `usb_target.sh -o mnt`**：目前是 `-o dev` 取節點再自己
`mount <dev> /mnt/usb`，繞過了工具內建的 `mkdir -p`、exfat/ntfs `modprobe` 與可寫性驗證。
掛載點不存在、檔案系統模組沒載、或媒體唯讀時只會失敗一行，job log 就沒帶出來。
@@ -790,6 +858,40 @@ margin status、全部 VRM 軌的 Vin/Vout/Iout/Temp、CB + ICB 溫感讀值，
**`sleep 120` 的方向還沒驗證** —— 若 `tr 518` 的流量是有時限的（參數含 `runtime=1`、
`CheckDataTime=200`），等 120 秒可能量到已經降下來的值，要上機比對 0s / 30s / 120s 三次；
TTL 尚未呼叫它。
- **`--runtime` 是整個 job 的總時限，不是每個 pass 的**：V1.1.7 起由 `config.ttl` 宣告
（`SSD_RUNTIME`/`SSD_COUNT`、`USB_RUNTIME`/`USB_COUNT`，COUNT 直接對應 `--passes`）。
`qfx5252-stress-*` 跑滿 RUNTIME 秒就結束，**`--passes` 不會把它延長**，所以
`RUNTIME=600, COUNT=720` 是 10 分鐘的壓力而不是 120 小時。要跑滿一天就把 RUNTIME 填 `86400`。
**V1.1.8 起出貨預設是 `RUNTIME=3600`（1 小時）**，`BMC_USB_RUNTIME` 則是 `172800`（2 天）——
三個壓力源的長度目前刻意不一致，開跑前要照當次 soak 的時間各自對一次。
壓力提早結束時 Script B 每輪的 `bgctl list` 數量會變少，但**沒有任何東西會主動報警**；
要比 24 小時更久則得加一段重啟 job 的邏輯。
- **BMC USB 的 service log 只剩隨身碟一份**：Script C 把 `journalctl` 導進
`log/bmc_usb_net.log` 再 `cp` 到 job 目錄，**不再印在 master console log**。
那個 `cp` 沒有檢查回傳值（`nfc_polling.log` 檔名打錯那次就是這樣安靜失敗的），
失敗的話這份 log 就完全消失。要嘛在 `cp` 之後補一次 `ls` 驗證，要嘛保留一份
`cat` 到 console。
- **`READ_VIN` / `READ_IIN` 不在 ADPM12200 手冊的 Table 3 裡**：`pwr_brick.sh` 讓它們沿用
Voltage / Current 那兩組係數。50 V 輸入算得出來、數量級也對，但**手冊沒有明說**。要定案
得找 ADI 確認，或找一個能獨立比對輸入電壓的量測點（`READ_VOUT` 就是靠 `show platform
voltage` 的 `PDB_IBC_*` 對上的）。
- **VI2C 沒有硬體號誌**（`vi2c_muxsel` 的 help 自己寫了「VI2C has no SEM_REG」），而平台的
sensor 驅動會週期性讀同一批 PDB 裝置。`pwr_brick.sh` 用「重讀到合理為止」繞過去，但根本
問題沒解：`_vrd` 裡的 `_vwait` 逾時後仍然回傳半成品，呼叫端也沒檢查它的回傳值。修
`blanton_icb_vi2c.sh` 會影響所有走 VI2C 的工具（ICB 溫感、風扇、EEPROM），值得先確認
是不是跟 pmon 競爭再動。
- **`blanton_multiphase_margin.sh` 與 `margin.sh` 沒有互斥機制**：兩支從不同側（原生 i2c vs
LTC2980 PMBus）摸同一批軌，各自都假設自己是唯一的寫入者。目前只靠文件與 help 提醒，
沒有任何執行期檢查。
- **Script 4 沒有收尾段**：`while 1` 之後就是檔案結尾，中斷時 DUT 停在 `port cd lb=mac` /
`l2 learn off` / `test mode nr=yes`，而且 CPU 壓力還在跑。要手動
`blanton_tr518.sh stop` + `systemctl stop mlucas-amm`（V1.1.8 起它是 systemd unit，
關掉 Tera Term 或 `kill $(jobs -p)` 都收不掉），否則下一輪任何測試都在被污染的狀態上開始
（Script A 的 `bgctl reset/stop --all` 收得掉 job，但收不掉 bcm 的 loopback 設定）。
可考慮加一支對應的收尾腳本，或在檔尾用 `messagebox` 提示要下哪些指令。
- **margin 在 soak 期間不再取樣**（V1.1.4）：只剩 Script A 的起始值與 Script C 的結束值。
漂移發生在中間就看不到了。若要恢復，比較好的做法是在 B 的迴圈內每 N 輪才掃一次，
而不是每輪都掃。
- **`blanton_ber.sh` 的 `sleep 30` 與 `BER_INTERVAL` 是兩處要同步改的數字**：Script C 寫死
`sendln "sleep 30"`，腳本預設 `BER_INTERVAL=30`。改一邊沒改另一邊，report 會讀到還沒累積完
一個 interval 的數字，而且不會有任何警告。
CLAUDE.md
+84 -5
View File
@@ -9,21 +9,31 @@ DUT 端的取數能力由一組 **bash 工具庫** 提供（CB FPGA `pcimem` →
完整架構見 [ARCHITECTURE.md](ARCHITECTURE.md)。
**目前狀態（2026-08-28）**：Script A 為 **V1.1.2**（A 集中記錄 A/B/C 三支的變更）。涵蓋
**目前狀態（2026-09-06）**：Script A 為 **V1.1.8**（A 集中記錄所有 TTL 的變更）。涵蓋
PCIe AER / DDR EDAC / PMON+TPM / 電壓 margin（9 顆 LTC2980）/ SWB loopback 線速流量 /
10G+1G 管理網路 ping / BMC DDR 與 USB / NVMe 健康，壓力層走平台的 `bgctl`。
switch unit 數量由 `config.ttl` 的 `SWB_UNIT0` / `SWB_UNIT1` 宣告，風扇轉速由 `FAN_SPEED` 指定
（預設 100 = 全速；soak 是熱測試，散熱不該是變因）。
測試 job log 收在 DUT 的 `/host/hw-eval/jobs/`，Script C 結束時掛好 USB 再帶時戳複製到 `/mnt/usb/`。
100G PRBS（`port_prbs_monitor.sh`）已隨包交付，但 **A/B/C 的呼叫仍註解掉**，還在 bring-up。
Script B 的 soak 迴圈每輪印 `bgctl list` + `jobs`，並 `pause 60`（V1.0.10 之前完全沒有 pause）。
Script B 的 soak 迴圈每輪印 `bgctl list` + `jobs` + `systemctl is-active mlucas-amm`，並 `pause 60`
（V1.0.10 之前完全沒有 pause）。V1.1.8 起 AMD CPU 壓力（`mlucas-avx2`）由 `systemd-run` 掛成
`mlucas-amm` transient unit（`Restart=always`），不再是 shell 的 `&` 背景 job —— 掉線也不會停，
Script C 用 `systemctl stop mlucas-amm` 收掉並把 log 複製到隨身碟。
V1.1.0 新增全機 SerDes BER 掃描（`blanton_ber.sh`，**Script C 已接**，依 `SWB_UNIT` 分支）、
TR518 負載（`blanton_tr518.sh`，**TTL 尚未接**）、SWB 軌功耗（`TH6_SWB{0,1}_power_readback.sh`），
線速流量也納入 100G `ce0`（VLAN 138，靠 ingress mirror 維持循環）。
Script A 開頭會先收掉前一輪殘留（`hw-test-session finish` + `bgctl reset/stop --all`），
再 `bgctl list` 確認沒有 job 留著佔資源。
NFC tag 讀取由 `nfc_polling.sh` 背景輪詢（A 做基線、B 起、C 停並 report）。
最後一次發布是 **V1.1.1**；SWB 的 I2C 通道與位址已於 2026-08-19 上機驗證。
另有 **`4_Blanton_Script_thermal_safety.ttl`**（熱 / 安規，**獨立跑不接 A→B→C**，滿載後每分鐘
取 PMON + 兩片 SWB 的軌功耗；**沒有收尾段**，中斷後要手動 `blanton_tr518.sh stop`）。
以及 **`5_Blanton_Script_Reboot_Cycle.ttl`**（重開機循環，**獨立跑不接 A→B→C**：登入 → 風扇 →
Check Pt1~Pt13 → `reboot` → `wait "Booting in blind mode"`，`cnt_cycle` 每輪遞增，`while 1` 無止境，
要停就關 Tera Term 的 macro）。**尚未上機驗證**。
流程圖：`docs/Blanton_Test_Flow.drawio`。
最後一次發布是 **V1.1.5**；SWB 的 I2C 通道與位址已於 2026-08-19 上機驗證。
margin 的 `VNOM` 已於 2026-08-30 改為 Blanton 實測中位數（144 條軌中 86 條上調 0.8~2.5%）。
交付用 `./publish/publish.sh` 打包。
## 技術棧
@@ -113,6 +123,23 @@ bash ~/Blanton_Script/port_prbs_monitor.sh report # PASS/FAIL 統計（沒
bash ~/Blanton_Script/port_prbs_monitor.sh stop # 收尾會跑 prbsstat STOp + prbs clear
# ⚠️ PRBS 打起來時 link 會顯示 down，這是正常的 —— 所以 start 刻意不印 port status
# ── PDB / CPB power brick 讀值 ──────────────────────
./Blanton_Script/pwr_brick.sh show # Vin/Iin/Vout/Iout/Temp × 5 顆
./Blanton_Script/pwr_brick.sh show -r # 多印 raw word
# 四顆 ADPM12200 每個量各一個 PMBus PAGE：Vin 9 / Iin 10 / Vout 2 / Iout 14 / Temp 18
# CPB.PU37 (0x26) 是不同零件：不寫 PAGE，自己一套換算
# PB_TRIES=1 ... show -r 可看未經重試的原始行為
# ── 多相 VRM margin（原生 i2c，38 條軌）──────────────
./Blanton_Script/blanton_multiphase_margin.sh high3 # 全部 +3%
./Blanton_Script/blanton_multiphase_margin.sh low3 # 全部 -3%
./Blanton_Script/blanton_multiphase_margin.sh comboA # 混合，組合 A
./Blanton_Script/blanton_multiphase_margin.sh comboB # 混合，組合 B
./Blanton_Script/blanton_multiphase_margin.sh save # ⚠️ 永久寫 NVM
# -u 0 / -u 1 單邊（SWB0=i2c-13/15，SWB1=i2c-14/16）；-n 只印指令
# 逐條印 SWB0_0V9_ANLG0 - 0.930V Configure Done；save 只印 Multiphase Save All
# ⚠️ 這不是 margin.sh 管的 LTC2980，兩支摸同一批軌，不要同時用
# ── 全機 SerDes BER（PRBS，期間 link 會顯示 DOWN）────
./Blanton_Script/blanton_ber.sh init # prbs set p=3 + prbs get（檢查每條 lane 鎖定）
./Blanton_Script/blanton_ber.sh start # prbsstat STArt Interval=30
@@ -218,6 +245,46 @@ Tera Term 連 COM port (115200-8-N-1)
- ⚠️ **ICB/PDB 一律走 VI2C（`blanton_icb_vi2c.sh`），不要走 VSPI**：VSPI ~18 ms/reg 會讓 I2C
byte 相間隔拉到 ~50 ms，踩中 SMBus 25–35 ms timeout，裝置直接 NACK。實測全掃 9.4 s vs 34.0 s。
- ⚠️ **I2C 讀一律 Repeated START**（不是 STOP + START），否則 PMBus/SMBus 裝置（VRM、EFUSE）不理。
- ⚠️ **Script C 的 BMC USB service log 不進 master log**：改成
`journalctl ... > log/bmc_usb_net.log` 再複製到隨身碟，**那是唯一一份**。
收工後翻不到就先確認 job 目錄裡有沒有這個檔
- ⚠️ **VI2C 這條路的壞法是「只壞高位元組」**，不是整包壞掉。`11.98 V` 會變成 `32.00 V`
—— 正的、數量級也不誇張，**擋全一/全零的過濾完全攔不到**。寫任何 VI2C 讀值工具都要有
合理範圍檢查 + 重讀，光靠 `PDB_REJECT_FFFF` 那種是不夠的（`pwr_brick.sh` 的教訓）
- ⚠️ **PMBus 的 PAGE 不是只有 VRM 通道在用**：ADPM12200 把每個量測放在不同 PAGE
（Vin 9 / Iin 10 / Vout 2 / Iout 14 / Temp 18），沒寫 PAGE 就讀，回的是 `0xFFFF` 或
`0x0000`。`blanton_pwr_data.sh` 的 PDB 表 page 是 `-`，這就是它整張表 NA 的原因
- ⚠️ **`--runtime` 是整個 job 的總時限，不是每個 pass 的**：V1.1.7 起由 `config.ttl` 的
`SSD_RUNTIME`/`SSD_COUNT`、`USB_RUNTIME`/`USB_COUNT` 指定（COUNT 就是 `--passes`）。
`qfx5252-stress-*` 跑滿 RUNTIME 秒就停，**`--passes` 不會把它延長** —— `RUNTIME=600` 就是
10 分鐘，不是 600×COUNT。要 24 小時就填 `86400`。壓力提早結束時 `bgctl list` 數量變少是
唯一線索，**不會報警**。V1.1.8 起出貨預設改為 `RUNTIME=3600`（1 小時），2 天 soak 要填 `172800`
- ⚠️ **`utils/kill_all_process.ttl` 只有 `kill $(jobs -p)`，抓不到 systemd unit**：把壓力工作改成
`systemd-run` 之後，Script C 一定要補對應的 `systemctl stop <unit>`，否則它會活過 Script C 燒進
下一輪，**收工的溫度／功耗全部是在滿載下量的**。V1.1.8 已為 `mlucas-amm` 補上。
Script 4 也改用同一個 unit，但它**沒有收尾段**，所以那行 `systemctl stop` 得由人手動下
- ⚠️ **`config.ttl` 少一個變數會讓 macro 當場中止，不是當成 0**：`EN_timestamp`（V1.1.8 新增，
餵 Script A `logopen` 的第 5 個參數）、`BMC_USB_RUNTIME` 都是必要項。只更新 `.ttl` 卻沿用舊的
`config.ttl`，Script A 會停在 `logopen` 那一行
- ⚠️ **log 時間戳的「格式」不在腳本裡**：`EN_timestamp` 只決定開不開，格式在 Tera Term 的
Setup → Additional settings → Log，存在**那台電腦的 `TERATERM.INI`**。同一份 macro 在兩台機器上
可以產生不同格式的 log，跨機比對前先確認
- ⚠️ **多相 VRM 與 LTC2980 是同一批軌的兩條路**：`blanton_multiphase_margin.sh`（原生 i2c）
和 `margin.sh`（LTC2980 PMBus）都假設自己是唯一寫入者，**沒有互斥檢查**，只靠人記得
- ⚠️ **traffic 的計數器基準在 v0.7.0 變了**：`tx 100 length=512` → `tx 200 length=324`，
每 burst 的位元組數 +27%。PASS/FAIL 是成對交叉比對不受影響，但**絕對值不能跟舊 log 比**
- ⚠️ **Script 4（thermal/safety）沒有收尾**：`while 1` 之後就是檔尾。中斷後 DUT 停在
`port cd lb=mac` / `l2 learn off` / `test mode nr=yes`，`mlucas-avx2` 也還在背景。
下一個測試會在被污染的狀態上開始，而且 **`show interfaces status` 看不出來**。
收尾：`blanton_tr518.sh stop` + `kill $(jobs -p)` + **`systemctl stop mlucas-amm`**
（V1.1.8 起 CPU 壓力是 systemd unit，`kill $(jobs -p)` 收不掉，少這一行 CPU 會一直滿載）
- ⚠️ **Script 4 與 Script B 不能共用同一台 DUT**：兩者都會接管 `port cd` 的 loopback
- ⚠️ **`settings/*.conf` 的 `VNOM` 是實測中位數，不是規格值**（2026-08-30 起）。它同時是
`margin_status` 偏差 % 的分母、也是 `margin_set` 推算 high/low/OV/UV 的基準，所以改它會
同時移動「看到的數字」和「實際打出去的電壓」。**跨這個日期的 margin log 不能直接互比。**
- ⚠️ **SWB 的 margin profile 是 per-CONN 的**：`combo_SWB_CONN13~16_{high,low}` 各自的百分比
對應該片板子的軌。套到別的 CONN 會 margin 到錯的軌，而且**不會報錯**。CB 沒有專屬 profile，
用通用的 `combo_high3` / `combo_low3`
- ⚠️ **`margin_save` / `STORE_USER_ALL` 會永久寫 NVM**，斷電保留 → **測試流程中絕不執行**，
以免覆蓋客戶出廠 config。`margin.sh` 的 auto-enable（`ON_OFF_CONFIG=0x1a`）只改 RAM，斷電復原。
v2.7.0 新增的 **`margin_save all` / `margin_save blanton` 一次寫 18 個 LTC2977**，
@@ -249,7 +316,12 @@ Tera Term 連 COM port (115200-8-N-1)
（`--renormalize` 只在進 index 的路上轉換）。驗證要看 byte：`grep -rlU $'\r' <dir>`
- ⚠️ **TTL 的 `timeout` 是全域的**：`timeout = N` 之後**每一個** `wait` 都被限制在 N 秒。逾時的 `wait`
直接返回而沒吃到 prompt，下一個指令就在前一個還沒跑完時送出，之後整輪錯開一拍。**設了一定要
配一個 `timeout = 0` 還原**（`wait_init.ttl` 60→0；Script B 的 cdc_ncm 探測 15→0 在 `:skip_ping`）
配一個 `timeout = 0` 還原**（`wait_init.ttl` 60→0；Script B 的 cdc_ncm 探測 15→0 兩處各還原一次
—— `endif` 之後走成功路徑、`:skip_ping` 走跳過路徑；Script 5 同一段**直接還原在 `if` 之前**，
一行涵蓋兩條路徑，因為它的 ping 區塊要 `wait` 一個 `sleep 10`，DUT 一忙就逼近 15 s 上限）
- ⚠️ **`goto` 的標籤沒定義，Tera Term 是執行到才報錯**：Script 5 從 Script B 抄 cdc_ncm 探測時
只帶走 `goto skip_ping` 沒帶 `:skip_ping`，平常測不出來 —— 只有真的抓不到 NCM 介面走進那條分支
才會跳錯誤視窗停住整個循環（已補）。抄段落過去時**連標籤一起抄**
- ⚠️ **兩張管理網卡同網段會 ARP flux**：`mgmt_ping_monitor.sh` 讓 eth0/eth1 同時 up，同一個 /24 下
對端 ARP 可能由任一張卡回應，回包落在沒送封包的那張。`ARP_STRICT=1` 擋掉；判讀時看 `RESULT` 行的
`nic_tx`/`nic_rx`（該卡自己的 packet delta）—— **ping 成功但 `nic_tx` 接近 0 = 封包從另一張卡出去的**
@@ -292,7 +364,14 @@ Tera Term 連 COM port (115200-8-N-1)
- `tools/` — Host / 離線端：`bcm_mibpair_report_V1.1.0.py`（drivshell log → per-pair 報表）、
`traffic_loopback_*.txt`（bcmcmd 原始指令表，`blanton_traffic_linespeed.sh` 是其 bash 版，
**改 loopback 線路時兩邊要同步**）、`100G_PRBS.txt` / `TR518.txt` / `fan_ctrl.txt`
（上機手貼用的原始指令；PRBS 已有 `.sh`，TR518 尚未腳本化）
（上機手貼用的原始指令；PRBS / TR518 / 100G traffic / multiphase normal 都已有對應 `.sh`）
- `publish/` — `publish.sh`（打包工具，**進 git**）+ `Script_ABC_Blanton_<Ver>/` 產出（**gitignored**）
- `tmp/` — 🚫 gitignored：**還沒上機驗證**的腳本暫存區（目前 `blanton_reboottest.sh`）。
上機測過才搬進 `src/Script_ABC_Blanton/Blanton_Script/` 並進 git —— 未驗證的東西不該混在
交付包裡，publish 時測試員分不出哪支能信
- `src/Script_ABC_Blanton/hammer/` — 🚫 gitignored：mlucas 的 ELF binary（~99 MB，avx512 / avx2 /
avx / sse2 / generic-c）。Script B 與 Script 4 會 `chmod +x` 後執行，但**它由 DUT image 帶**，
不從這個 repo 發 —— binary 一旦進 git 就永久留在 history，每個 clone 都要付這個代價。
`publish.sh` 也把它排除，所以打包結果不會因為誰的工作目錄有沒有 binary 而變成 100 MB
- `secret/` — 🚫 gitignored（除 `README.md` 與 `*.example`）：DUT 帳密、per-unit BDF 覆寫、COM 設定
- `For_AI/` — 🚫 gitignored：AI 協作素材（波形截圖、草稿筆記）
docs/ADPM12200CMLZxx_DS_Datasheet_2025_12_19.pdf
BIN
View File
Binary file not shown.
docs/Blanton_Test_Flow.drawio
+172
View File
@@ -0,0 +1,172 @@
<mxfile host="app.diagrams.net" agent="Blanton_TTL_Script/tools" version="24.7.17">
<diagram id="blanton-test-flow" name="Blanton Test Flow">
<mxGraphModel dx="1400" dy="900" grid="1" gridSize="10" guides="1" tooltips="1" connect="1" arrows="1" fold="1" page="1" pageScale="1" pageWidth="1670" pageHeight="1785" math="0" shadow="0">
<root>
<mxCell id="0"/>
<mxCell id="1" parent="0"/>
<mxCell id="n11" value="Blanton (Project Helios) — 測試流程" style="text;html=1;align=center;verticalAlign=middle;fontSize=20;fontStyle=1;" vertex="1" parent="1"><mxGeometry x="30" y="20" width="1610" height="34" as="geometry"/></mxCell>
<mxCell id="n12" value="來源：src/Script_ABC_Blanton/{1,2,3}_Blanton_Script_*.ttl（Script A V1.1.3）　·　⟨…⟩ = 由 config.ttl 的旗標決定" style="text;html=1;align=center;verticalAlign=middle;fontSize=11;fontColor=#666666;" vertex="1" parent="1"><mxGeometry x="30" y="54" width="1610" height="20" as="geometry"/></mxCell>
<mxCell id="n13" value="Script A — Pre-test（基線 / 環境建立）" style="swimlane;html=1;startSize=34;fillColor=#ffffff;strokeColor=#4d4d4d;fontSize=14;fontStyle=1;horizontal=1;" vertex="1" parent="1"><mxGeometry x="30" y="96" width="380" height="1459" as="geometry"/></mxCell>
<mxCell id="n14" value="&lt;b&gt;include config.ttl&lt;/b&gt;&lt;br&gt;project_name, strTestcase, EN_Margin,&lt;br&gt;EN_log, FAN_SPEED, SWB_UNIT0/1" style="rounded=1;whiteSpace=wrap;html=1;fillColor=#fff2cc;strokeColor=#d6b656;align=left;spacingLeft=8;verticalAlign=middle;fontSize=11;" vertex="1" parent="n13"><mxGeometry x="18" y="44" width="344" height="64" as="geometry"/></mxCell>
<mxCell id="n15" value="&lt;b&gt;logopen&lt;/b&gt; Logs/&amp;lt;proj&amp;gt;_&amp;lt;case&amp;gt;_&amp;lt;ts&amp;gt;.log&lt;br&gt;&lt;i&gt;⟨EN_log = 1⟩&lt;/i&gt;" style="rounded=1;whiteSpace=wrap;html=1;fillColor=#fff2cc;strokeColor=#d6b656;align=left;spacingLeft=8;verticalAlign=middle;fontSize=11;" vertex="1" parent="n13"><mxGeometry x="18" y="124" width="344" height="49" as="geometry"/></mxCell>
<mxCell id="e16" value="" style="edgeStyle=orthogonalEdgeStyle;rounded=0;html=1;exitX=0.5;exitY=1;exitDx=0;exitDy=0;entryX=0.5;entryY=0;entryDx=0;entryDy=0;strokeColor=#4d4d4d;" edge="1" parent="1" source="n14" target="n15"><mxGeometry relative="1" as="geometry"/></mxCell>
<mxCell id="n17" value="&lt;b&gt;Root Login&lt;/b&gt;&lt;br&gt;login → sudo -i → root@sonic:~#" style="rounded=1;whiteSpace=wrap;html=1;fillColor=#dae8fc;strokeColor=#6c8ebf;align=left;spacingLeft=8;verticalAlign=middle;fontSize=11;" vertex="1" parent="n13"><mxGeometry x="18" y="189" width="344" height="49" as="geometry"/></mxCell>
<mxCell id="e18" value="" style="edgeStyle=orthogonalEdgeStyle;rounded=0;html=1;exitX=0.5;exitY=1;exitDx=0;exitDy=0;entryX=0.5;entryY=0;entryDx=0;entryDy=0;strokeColor=#4d4d4d;" edge="1" parent="1" source="n15" target="n17"><mxGeometry relative="1" as="geometry"/></mxCell>
<mxCell id="n19" value="&lt;b&gt;Pre Setting&lt;/b&gt;&lt;br&gt;date -s 對時 · rm /host/hw-eval/jobs/*" style="rounded=1;whiteSpace=wrap;html=1;fillColor=#dae8fc;strokeColor=#6c8ebf;align=left;spacingLeft=8;verticalAlign=middle;fontSize=11;" vertex="1" parent="n13"><mxGeometry x="18" y="254" width="344" height="49" as="geometry"/></mxCell>
<mxCell id="e20" value="" style="edgeStyle=orthogonalEdgeStyle;rounded=0;html=1;exitX=0.5;exitY=1;exitDx=0;exitDy=0;entryX=0.5;entryY=0;entryDx=0;entryDy=0;strokeColor=#4d4d4d;" edge="1" parent="1" source="n17" target="n19"><mxGeometry relative="1" as="geometry"/></mxCell>
<mxCell id="n21" value="&lt;b&gt;HW Test Session — 收前一輪&lt;/b&gt;&lt;br&gt;hw-test-session finish · bgctl reset --yes&lt;br&gt;bgctl stop --all · &lt;b&gt;bgctl list 必須空&lt;/b&gt;" style="rounded=1;whiteSpace=wrap;html=1;fillColor=#f8cecc;strokeColor=#b85450;align=left;spacingLeft=8;verticalAlign=middle;fontSize=11;" vertex="1" parent="n13"><mxGeometry x="18" y="319" width="344" height="64" as="geometry"/></mxCell>
<mxCell id="e22" value="" style="edgeStyle=orthogonalEdgeStyle;rounded=0;html=1;exitX=0.5;exitY=1;exitDx=0;exitDy=0;entryX=0.5;entryY=0;entryDx=0;entryDy=0;strokeColor=#4d4d4d;" edge="1" parent="1" source="n19" target="n21"><mxGeometry relative="1" as="geometry"/></mxCell>
<mxCell id="n23" value="&lt;b&gt;hw-test-session start&lt;/b&gt;" style="rounded=1;whiteSpace=wrap;html=1;fillColor=#dae8fc;strokeColor=#6c8ebf;align=left;spacingLeft=8;verticalAlign=middle;fontSize=11;" vertex="1" parent="n13"><mxGeometry x="18" y="399" width="344" height="34" as="geometry"/></mxCell>
<mxCell id="e24" value="" style="edgeStyle=orthogonalEdgeStyle;rounded=0;html=1;exitX=0.5;exitY=1;exitDx=0;exitDy=0;entryX=0.5;entryY=0;entryDx=0;entryDy=0;strokeColor=#4d4d4d;" edge="1" parent="1" source="n21" target="n23"><mxGeometry relative="1" as="geometry"/></mxCell>
<mxCell id="n25" value="&lt;b&gt;FAN SPEED&lt;/b&gt;&lt;br&gt;max31790 rebind ×2 → fan-speed-control.sh $FAN_SPEED" style="rounded=1;whiteSpace=wrap;html=1;fillColor=#dae8fc;strokeColor=#6c8ebf;align=left;spacingLeft=8;verticalAlign=middle;fontSize=11;" vertex="1" parent="n13"><mxGeometry x="18" y="449" width="344" height="49" as="geometry"/></mxCell>
<mxCell id="e26" value="" style="edgeStyle=orthogonalEdgeStyle;rounded=0;html=1;exitX=0.5;exitY=1;exitDx=0;exitDy=0;entryX=0.5;entryY=0;entryDx=0;entryDy=0;strokeColor=#4d4d4d;" edge="1" parent="1" source="n23" target="n25"><mxGeometry relative="1" as="geometry"/></mxCell>
<mxCell id="n27" value="&lt;b&gt;Wait DUT Init&lt;/b&gt; utils/wait_init.ttl&lt;br&gt;輪詢 bcmcmd ps，兩 unit link up ≥ 216&lt;br&gt;&lt;i&gt;⟨SWB_UNIT0 / SWB_UNIT1⟩ · 無逾時出口&lt;/i&gt;" style="rounded=1;whiteSpace=wrap;html=1;fillColor=#fff2cc;strokeColor=#d6b656;align=left;spacingLeft=8;verticalAlign=middle;fontSize=11;" vertex="1" parent="n13"><mxGeometry x="18" y="514" width="344" height="64" as="geometry"/></mxCell>
<mxCell id="e28" value="" style="edgeStyle=orthogonalEdgeStyle;rounded=0;html=1;exitX=0.5;exitY=1;exitDx=0;exitDy=0;entryX=0.5;entryY=0;entryDx=0;entryDy=0;strokeColor=#4d4d4d;" edge="1" parent="1" source="n25" target="n27"><mxGeometry relative="1" as="geometry"/></mxCell>
<mxCell id="n29" value="&lt;b&gt;DUT Info&lt;/b&gt;&lt;br&gt;show boot/version/platform · fwutil · syseeprom&lt;br&gt;ssdhealth · TPM · NVMe" style="rounded=1;whiteSpace=wrap;html=1;fillColor=#dae8fc;strokeColor=#6c8ebf;align=left;spacingLeft=8;verticalAlign=middle;fontSize=11;" vertex="1" parent="n13"><mxGeometry x="18" y="594" width="344" height="64" as="geometry"/></mxCell>
<mxCell id="e30" value="" style="edgeStyle=orthogonalEdgeStyle;rounded=0;html=1;exitX=0.5;exitY=1;exitDx=0;exitDy=0;entryX=0.5;entryY=0;entryDx=0;entryDy=0;strokeColor=#4d4d4d;" edge="1" parent="1" source="n27" target="n29"><mxGeometry relative="1" as="geometry"/></mxCell>
<mxCell id="n31" value="&lt;b&gt;BMC&lt;/b&gt; bmc-first-enroll · version · status" style="rounded=1;whiteSpace=wrap;html=1;fillColor=#dae8fc;strokeColor=#6c8ebf;align=left;spacingLeft=8;verticalAlign=middle;fontSize=11;" vertex="1" parent="n13"><mxGeometry x="18" y="674" width="344" height="34" as="geometry"/></mxCell>
<mxCell id="e32" value="" style="edgeStyle=orthogonalEdgeStyle;rounded=0;html=1;exitX=0.5;exitY=1;exitDx=0;exitDy=0;entryX=0.5;entryY=0;entryDx=0;entryDy=0;strokeColor=#4d4d4d;" edge="1" parent="1" source="n29" target="n31"><mxGeometry relative="1" as="geometry"/></mxCell>
<mxCell id="n33" value="&lt;b&gt;Load Shell Script&lt;/b&gt;&lt;br&gt;source blanton_fpga_pcimem / cb_i2c / icb_vi2c /&lt;br&gt;temp_sensor / pwr_data / traffic_linespeed / margin" style="rounded=1;whiteSpace=wrap;html=1;fillColor=#dae8fc;strokeColor=#6c8ebf;align=left;spacingLeft=8;verticalAlign=middle;fontSize=11;" vertex="1" parent="n13"><mxGeometry x="18" y="724" width="344" height="64" as="geometry"/></mxCell>
<mxCell id="e34" value="" style="edgeStyle=orthogonalEdgeStyle;rounded=0;html=1;exitX=0.5;exitY=1;exitDx=0;exitDy=0;entryX=0.5;entryY=0;entryDx=0;entryDy=0;strokeColor=#4d4d4d;" edge="1" parent="1" source="n31" target="n33"><mxGeometry relative="1" as="geometry"/></mxCell>
<mxCell id="n35" value="&lt;b&gt;CLEAR PCIe Error&lt;/b&gt; ×7&lt;br&gt;TH6_SWB0 · TH6_SWB1 · FPGA · BMC · DDR · I210 · SSD" style="rounded=1;whiteSpace=wrap;html=1;fillColor=#dae8fc;strokeColor=#6c8ebf;align=left;spacingLeft=8;verticalAlign=middle;fontSize=11;" vertex="1" parent="n13"><mxGeometry x="18" y="804" width="344" height="49" as="geometry"/></mxCell>
<mxCell id="e36" value="" style="edgeStyle=orthogonalEdgeStyle;rounded=0;html=1;exitX=0.5;exitY=1;exitDx=0;exitDy=0;entryX=0.5;entryY=0;entryDx=0;entryDy=0;strokeColor=#4d4d4d;" edge="1" parent="1" source="n33" target="n35"><mxGeometry relative="1" as="geometry"/></mxCell>
<mxCell id="n37" value="&lt;b&gt;PCIe tree / link / bandwidth&lt;/b&gt; utils/pcie_bus.ttl" style="rounded=1;whiteSpace=wrap;html=1;fillColor=#dae8fc;strokeColor=#6c8ebf;align=left;spacingLeft=8;verticalAlign=middle;fontSize=11;" vertex="1" parent="n13"><mxGeometry x="18" y="869" width="344" height="34" as="geometry"/></mxCell>
<mxCell id="e38" value="" style="edgeStyle=orthogonalEdgeStyle;rounded=0;html=1;exitX=0.5;exitY=1;exitDx=0;exitDy=0;entryX=0.5;entryY=0;entryDx=0;entryDy=0;strokeColor=#4d4d4d;" edge="1" parent="1" source="n35" target="n37"><mxGeometry relative="1" as="geometry"/></mxCell>
<mxCell id="n39" value="&lt;b&gt;Check Margin&lt;/b&gt; margin_status_all.sh（9 顆 LTC2980）&lt;br&gt;&lt;i&gt;⟨EN_Margin = 1⟩&lt;/i&gt;" style="rounded=1;whiteSpace=wrap;html=1;fillColor=#fff2cc;strokeColor=#d6b656;align=left;spacingLeft=8;verticalAlign=middle;fontSize=11;" vertex="1" parent="n13"><mxGeometry x="18" y="919" width="344" height="49" as="geometry"/></mxCell>
<mxCell id="e40" value="" style="edgeStyle=orthogonalEdgeStyle;rounded=0;html=1;exitX=0.5;exitY=1;exitDx=0;exitDy=0;entryX=0.5;entryY=0;entryDx=0;entryDy=0;strokeColor=#4d4d4d;" edge="1" parent="1" source="n37" target="n39"><mxGeometry relative="1" as="geometry"/></mxCell>
<mxCell id="n41" value="&lt;b&gt;TAKE DATA&lt;/b&gt; setup_pmon.ttl（9 項）+ show_dmesg.ttl" style="rounded=1;whiteSpace=wrap;html=1;fillColor=#dae8fc;strokeColor=#6c8ebf;align=left;spacingLeft=8;verticalAlign=middle;fontSize=11;" vertex="1" parent="n13"><mxGeometry x="18" y="984" width="344" height="34" as="geometry"/></mxCell>
<mxCell id="e42" value="" style="edgeStyle=orthogonalEdgeStyle;rounded=0;html=1;exitX=0.5;exitY=1;exitDx=0;exitDy=0;entryX=0.5;entryY=0;entryDx=0;entryDy=0;strokeColor=#4d4d4d;" edge="1" parent="1" source="n39" target="n41"><mxGeometry relative="1" as="geometry"/></mxCell>
<mxCell id="n43" value="&lt;b&gt;10G/1G MGMT Ping&lt;/b&gt;&lt;br&gt;start → 30s → report → clear" style="rounded=1;whiteSpace=wrap;html=1;fillColor=#dae8fc;strokeColor=#6c8ebf;align=left;spacingLeft=8;verticalAlign=middle;fontSize=11;" vertex="1" parent="n13"><mxGeometry x="18" y="1034" width="344" height="49" as="geometry"/></mxCell>
<mxCell id="e44" value="" style="edgeStyle=orthogonalEdgeStyle;rounded=0;html=1;exitX=0.5;exitY=1;exitDx=0;exitDy=0;entryX=0.5;entryY=0;entryDx=0;entryDy=0;strokeColor=#4d4d4d;" edge="1" parent="1" source="n41" target="n43"><mxGeometry relative="1" as="geometry"/></mxCell>
<mxCell id="n45" value="&lt;b&gt;NFC Test&lt;/b&gt;&lt;br&gt;start → status → 30s → stop → report" style="rounded=1;whiteSpace=wrap;html=1;fillColor=#dae8fc;strokeColor=#6c8ebf;align=left;spacingLeft=8;verticalAlign=middle;fontSize=11;" vertex="1" parent="n13"><mxGeometry x="18" y="1099" width="344" height="49" as="geometry"/></mxCell>
<mxCell id="e46" value="" style="edgeStyle=orthogonalEdgeStyle;rounded=0;html=1;exitX=0.5;exitY=1;exitDx=0;exitDy=0;entryX=0.5;entryY=0;entryDx=0;entryDy=0;strokeColor=#4d4d4d;" edge="1" parent="1" source="n43" target="n45"><mxGeometry relative="1" as="geometry"/></mxCell>
<mxCell id="n47" value="&lt;b&gt;100G Port Status&lt;/b&gt; Ethernet513 / 514" style="rounded=1;whiteSpace=wrap;html=1;fillColor=#dae8fc;strokeColor=#6c8ebf;align=left;spacingLeft=8;verticalAlign=middle;fontSize=11;" vertex="1" parent="n13"><mxGeometry x="18" y="1164" width="344" height="34" as="geometry"/></mxCell>
<mxCell id="e48" value="" style="edgeStyle=orthogonalEdgeStyle;rounded=0;html=1;exitX=0.5;exitY=1;exitDx=0;exitDy=0;entryX=0.5;entryY=0;entryDx=0;entryDy=0;strokeColor=#4d4d4d;" edge="1" parent="1" source="n45" target="n47"><mxGeometry relative="1" as="geometry"/></mxCell>
<mxCell id="n49" value="&lt;b&gt;100G PRBS&lt;/b&gt; port_prbs_monitor.sh&lt;br&gt;&lt;i&gt;整段註解 — bring-up 中&lt;/i&gt;" style="rounded=1;whiteSpace=wrap;html=1;fillColor=#f5f5f5;strokeColor=#999999;dashed=1;align=left;spacingLeft=8;verticalAlign=middle;fontSize=11;fontColor=#808080;" vertex="1" parent="n13"><mxGeometry x="18" y="1214" width="344" height="49" as="geometry"/></mxCell>
<mxCell id="e50" value="" style="edgeStyle=orthogonalEdgeStyle;rounded=0;html=1;exitX=0.5;exitY=1;exitDx=0;exitDy=0;entryX=0.5;entryY=0;entryDx=0;entryDy=0;strokeColor=#4d4d4d;" edge="1" parent="1" source="n47" target="n49"><mxGeometry relative="1" as="geometry"/></mxCell>
<mxCell id="n51" value="&lt;b&gt;First Traffic Test（基線）&lt;/b&gt;&lt;br&gt;ps → init → clear → 15s → show → start → 15s → report&lt;br&gt;&lt;i&gt;⟨SWB_UNIT⟩ 兩邊 / -u 0 / -u 1 / skip&lt;/i&gt;" style="rounded=1;whiteSpace=wrap;html=1;fillColor=#fff2cc;strokeColor=#d6b656;align=left;spacingLeft=8;verticalAlign=middle;fontSize=11;" vertex="1" parent="n13"><mxGeometry x="18" y="1279" width="344" height="64" as="geometry"/></mxCell>
<mxCell id="e52" value="" style="edgeStyle=orthogonalEdgeStyle;rounded=0;html=1;exitX=0.5;exitY=1;exitDx=0;exitDy=0;entryX=0.5;entryY=0;entryDx=0;entryDy=0;strokeColor=#4d4d4d;" edge="1" parent="1" source="n49" target="n51"><mxGeometry relative="1" as="geometry"/></mxCell>
<mxCell id="n53" value="&lt;b&gt;Show power-on uptime&lt;/b&gt;" style="rounded=1;whiteSpace=wrap;html=1;fillColor=#dae8fc;strokeColor=#6c8ebf;align=left;spacingLeft=8;verticalAlign=middle;fontSize=11;" vertex="1" parent="n13"><mxGeometry x="18" y="1359" width="344" height="34" as="geometry"/></mxCell>
<mxCell id="e54" value="" style="edgeStyle=orthogonalEdgeStyle;rounded=0;html=1;exitX=0.5;exitY=1;exitDx=0;exitDy=0;entryX=0.5;entryY=0;entryDx=0;entryDy=0;strokeColor=#4d4d4d;" edge="1" parent="1" source="n51" target="n53"><mxGeometry relative="1" as="geometry"/></mxCell>
<mxCell id="n55" value="messagebox 『Script A DONE / Start Script B』" style="rounded=1;whiteSpace=wrap;html=1;fillColor=#ffe6cc;strokeColor=#d79b00;align=center;verticalAlign=middle;fontSize=11;fontStyle=1;" vertex="1" parent="n13"><mxGeometry x="18" y="1409" width="344" height="34" as="geometry"/></mxCell>
<mxCell id="e56" value="" style="edgeStyle=orthogonalEdgeStyle;rounded=0;html=1;exitX=0.5;exitY=1;exitDx=0;exitDy=0;entryX=0.5;entryY=0;entryDx=0;entryDy=0;strokeColor=#4d4d4d;" edge="1" parent="1" source="n53" target="n55"><mxGeometry relative="1" as="geometry"/></mxCell>
<mxCell id="n57" value="Script B — Stress（壓力 soak，人為中斷才結束）" style="swimlane;html=1;startSize=34;fillColor=#ffffff;strokeColor=#4d4d4d;fontSize=14;fontStyle=1;horizontal=1;" vertex="1" parent="1"><mxGeometry x="440" y="96" width="380" height="1014" as="geometry"/></mxCell>
<mxCell id="n58" value="&lt;b&gt;include config.ttl&lt;/b&gt;" style="rounded=1;whiteSpace=wrap;html=1;fillColor=#fff2cc;strokeColor=#d6b656;align=left;spacingLeft=8;verticalAlign=middle;fontSize=11;" vertex="1" parent="n57"><mxGeometry x="18" y="44" width="344" height="34" as="geometry"/></mxCell>
<mxCell id="n59" value="&lt;b&gt;CLEAR EVENT&lt;/b&gt;" style="rounded=1;whiteSpace=wrap;html=1;fillColor=#dae8fc;strokeColor=#6c8ebf;align=left;spacingLeft=8;verticalAlign=middle;fontSize=11;" vertex="1" parent="n57"><mxGeometry x="18" y="94" width="344" height="34" as="geometry"/></mxCell>
<mxCell id="e60" value="" style="edgeStyle=orthogonalEdgeStyle;rounded=0;html=1;exitX=0.5;exitY=1;exitDx=0;exitDy=0;entryX=0.5;entryY=0;entryDx=0;entryDy=0;strokeColor=#4d4d4d;" edge="1" parent="1" source="n58" target="n59"><mxGeometry relative="1" as="geometry"/></mxCell>
<mxCell id="n61" value="&lt;b&gt;AMD CPU Stress&lt;/b&gt; mlucas-avx2 -cpu 0:15" style="rounded=1;whiteSpace=wrap;html=1;fillColor=#dae8fc;strokeColor=#6c8ebf;align=left;spacingLeft=8;verticalAlign=middle;fontSize=11;" vertex="1" parent="n57"><mxGeometry x="18" y="144" width="344" height="34" as="geometry"/></mxCell>
<mxCell id="e62" value="" style="edgeStyle=orthogonalEdgeStyle;rounded=0;html=1;exitX=0.5;exitY=1;exitDx=0;exitDy=0;entryX=0.5;entryY=0;entryDx=0;entryDy=0;strokeColor=#4d4d4d;" edge="1" parent="1" source="n59" target="n61"><mxGeometry relative="1" as="geometry"/></mxCell>
<mxCell id="n63" value="&lt;b&gt;BMC DDR Stress&lt;/b&gt; bgctl run bmc-manager memtester" style="rounded=1;whiteSpace=wrap;html=1;fillColor=#dae8fc;strokeColor=#6c8ebf;align=left;spacingLeft=8;verticalAlign=middle;fontSize=11;" vertex="1" parent="n57"><mxGeometry x="18" y="194" width="344" height="34" as="geometry"/></mxCell>
<mxCell id="e64" value="" style="edgeStyle=orthogonalEdgeStyle;rounded=0;html=1;exitX=0.5;exitY=1;exitDx=0;exitDy=0;entryX=0.5;entryY=0;entryDx=0;entryDy=0;strokeColor=#4d4d4d;" edge="1" parent="1" source="n61" target="n63"><mxGeometry relative="1" as="geometry"/></mxCell>
<mxCell id="n65" value="&lt;b&gt;BMC Monitor&lt;/b&gt; bmc_monitor.sh start&lt;br&gt;free -m + I2C 寫入/讀回圖樣測試" style="rounded=1;whiteSpace=wrap;html=1;fillColor=#dae8fc;strokeColor=#6c8ebf;align=left;spacingLeft=8;verticalAlign=middle;fontSize=11;" vertex="1" parent="n57"><mxGeometry x="18" y="244" width="344" height="49" as="geometry"/></mxCell>
<mxCell id="e66" value="" style="edgeStyle=orthogonalEdgeStyle;rounded=0;html=1;exitX=0.5;exitY=1;exitDx=0;exitDy=0;entryX=0.5;entryY=0;entryDx=0;entryDy=0;strokeColor=#4d4d4d;" edge="1" parent="1" source="n63" target="n65"><mxGeometry relative="1" as="geometry"/></mxCell>
<mxCell id="n67" value="&lt;b&gt;DDR Memory Stress&lt;/b&gt; bgctl run memtester" style="rounded=1;whiteSpace=wrap;html=1;fillColor=#dae8fc;strokeColor=#6c8ebf;align=left;spacingLeft=8;verticalAlign=middle;fontSize=11;" vertex="1" parent="n57"><mxGeometry x="18" y="309" width="344" height="34" as="geometry"/></mxCell>
<mxCell id="e68" value="" style="edgeStyle=orthogonalEdgeStyle;rounded=0;html=1;exitX=0.5;exitY=1;exitDx=0;exitDy=0;entryX=0.5;entryY=0;entryDx=0;entryDy=0;strokeColor=#4d4d4d;" edge="1" parent="1" source="n65" target="n67"><mxGeometry relative="1" as="geometry"/></mxCell>
<mxCell id="n69" value="&lt;b&gt;SSD read/write&lt;/b&gt; bgctl run qfx5252-stress-ssd" style="rounded=1;whiteSpace=wrap;html=1;fillColor=#dae8fc;strokeColor=#6c8ebf;align=left;spacingLeft=8;verticalAlign=middle;fontSize=11;" vertex="1" parent="n57"><mxGeometry x="18" y="359" width="344" height="34" as="geometry"/></mxCell>
<mxCell id="e70" value="" style="edgeStyle=orthogonalEdgeStyle;rounded=0;html=1;exitX=0.5;exitY=1;exitDx=0;exitDy=0;entryX=0.5;entryY=0;entryDx=0;entryDy=0;strokeColor=#4d4d4d;" edge="1" parent="1" source="n67" target="n69"><mxGeometry relative="1" as="geometry"/></mxCell>
<mxCell id="n71" value="&lt;b&gt;USB read/write&lt;/b&gt; usb_target.sh -o dev → bgctl run&lt;br&gt;qfx5252-stress-usb" style="rounded=1;whiteSpace=wrap;html=1;fillColor=#dae8fc;strokeColor=#6c8ebf;align=left;spacingLeft=8;verticalAlign=middle;fontSize=11;" vertex="1" parent="n57"><mxGeometry x="18" y="409" width="344" height="49" as="geometry"/></mxCell>
<mxCell id="e72" value="" style="edgeStyle=orthogonalEdgeStyle;rounded=0;html=1;exitX=0.5;exitY=1;exitDx=0;exitDy=0;entryX=0.5;entryY=0;entryDx=0;entryDy=0;strokeColor=#4d4d4d;" edge="1" parent="1" source="n69" target="n71"><mxGeometry relative="1" as="geometry"/></mxCell>
<mxCell id="n73" value="&lt;b&gt;SHOW Background job&lt;/b&gt; bgctl list" style="rounded=1;whiteSpace=wrap;html=1;fillColor=#dae8fc;strokeColor=#6c8ebf;align=left;spacingLeft=8;verticalAlign=middle;fontSize=11;" vertex="1" parent="n57"><mxGeometry x="18" y="474" width="344" height="34" as="geometry"/></mxCell>
<mxCell id="e74" value="" style="edgeStyle=orthogonalEdgeStyle;rounded=0;html=1;exitX=0.5;exitY=1;exitDx=0;exitDy=0;entryX=0.5;entryY=0;entryDx=0;entryDy=0;strokeColor=#4d4d4d;" edge="1" parent="1" source="n71" target="n73"><mxGeometry relative="1" as="geometry"/></mxCell>
<mxCell id="n75" value="&lt;b&gt;BMC USB Test&lt;/b&gt; 偵測 cdc_ncm 介面" style="rounded=1;whiteSpace=wrap;html=1;fillColor=#dae8fc;strokeColor=#6c8ebf;align=left;spacingLeft=8;verticalAlign=middle;fontSize=11;" vertex="1" parent="n57"><mxGeometry x="18" y="524" width="344" height="34" as="geometry"/></mxCell>
<mxCell id="e76" value="" style="edgeStyle=orthogonalEdgeStyle;rounded=0;html=1;exitX=0.5;exitY=1;exitDx=0;exitDy=0;entryX=0.5;entryY=0;entryDx=0;entryDy=0;strokeColor=#4d4d4d;" edge="1" parent="1" source="n73" target="n75"><mxGeometry relative="1" as="geometry"/></mxCell>
<mxCell id="n77" value="&lt;b&gt;:skip_ping&lt;/b&gt; &lt;b&gt;timeout = 0&lt;/b&gt;（還原全域逾時）" style="rounded=1;whiteSpace=wrap;html=1;fillColor=#f8cecc;strokeColor=#b85450;align=left;spacingLeft=8;verticalAlign=middle;fontSize=11;" vertex="1" parent="n57"><mxGeometry x="18" y="574" width="344" height="34" as="geometry"/></mxCell>
<mxCell id="e78" value="" style="edgeStyle=orthogonalEdgeStyle;rounded=0;html=1;exitX=0.5;exitY=1;exitDx=0;exitDy=0;entryX=0.5;entryY=0;entryDx=0;entryDy=0;strokeColor=#4d4d4d;" edge="1" parent="1" source="n75" target="n77"><mxGeometry relative="1" as="geometry"/></mxCell>
<mxCell id="n79" value="&lt;b&gt;10G/1G MGMT Ping&lt;/b&gt; start → status" style="rounded=1;whiteSpace=wrap;html=1;fillColor=#dae8fc;strokeColor=#6c8ebf;align=left;spacingLeft=8;verticalAlign=middle;fontSize=11;" vertex="1" parent="n57"><mxGeometry x="18" y="624" width="344" height="34" as="geometry"/></mxCell>
<mxCell id="e80" value="" style="edgeStyle=orthogonalEdgeStyle;rounded=0;html=1;exitX=0.5;exitY=1;exitDx=0;exitDy=0;entryX=0.5;entryY=0;entryDx=0;entryDy=0;strokeColor=#4d4d4d;" edge="1" parent="1" source="n77" target="n79"><mxGeometry relative="1" as="geometry"/></mxCell>
<mxCell id="n81" value="&lt;b&gt;NFC Test&lt;/b&gt; start → status" style="rounded=1;whiteSpace=wrap;html=1;fillColor=#dae8fc;strokeColor=#6c8ebf;align=left;spacingLeft=8;verticalAlign=middle;fontSize=11;" vertex="1" parent="n57"><mxGeometry x="18" y="674" width="344" height="34" as="geometry"/></mxCell>
<mxCell id="e82" value="" style="edgeStyle=orthogonalEdgeStyle;rounded=0;html=1;exitX=0.5;exitY=1;exitDx=0;exitDy=0;entryX=0.5;entryY=0;entryDx=0;entryDy=0;strokeColor=#4d4d4d;" edge="1" parent="1" source="n79" target="n81"><mxGeometry relative="1" as="geometry"/></mxCell>
<mxCell id="n83" value="&lt;b&gt;100G Port&lt;/b&gt; lpmode off · config interface startup" style="rounded=1;whiteSpace=wrap;html=1;fillColor=#dae8fc;strokeColor=#6c8ebf;align=left;spacingLeft=8;verticalAlign=middle;fontSize=11;" vertex="1" parent="n57"><mxGeometry x="18" y="724" width="344" height="34" as="geometry"/></mxCell>
<mxCell id="e84" value="" style="edgeStyle=orthogonalEdgeStyle;rounded=0;html=1;exitX=0.5;exitY=1;exitDx=0;exitDy=0;entryX=0.5;entryY=0;entryDx=0;entryDy=0;strokeColor=#4d4d4d;" edge="1" parent="1" source="n81" target="n83"><mxGeometry relative="1" as="geometry"/></mxCell>
<mxCell id="n85" value="&lt;b&gt;100G PRBS&lt;/b&gt; &lt;i&gt;整段註解 — bring-up 中&lt;/i&gt;" style="rounded=1;whiteSpace=wrap;html=1;fillColor=#f5f5f5;strokeColor=#999999;dashed=1;align=left;spacingLeft=8;verticalAlign=middle;fontSize=11;fontColor=#808080;" vertex="1" parent="n57"><mxGeometry x="18" y="774" width="344" height="34" as="geometry"/></mxCell>
<mxCell id="e86" value="" style="edgeStyle=orthogonalEdgeStyle;rounded=0;html=1;exitX=0.5;exitY=1;exitDx=0;exitDy=0;entryX=0.5;entryY=0;entryDx=0;entryDy=0;strokeColor=#4d4d4d;" edge="1" parent="1" source="n83" target="n85"><mxGeometry relative="1" as="geometry"/></mxCell>
<mxCell id="n87" value="&lt;b&gt;Traffic START&lt;/b&gt;&lt;br&gt;ps → init → clear → 15s → show → start&lt;br&gt;&lt;i&gt;⟨SWB_UNIT⟩ 兩邊 / -u 0 / -u 1 / skip&lt;/i&gt;" style="rounded=1;whiteSpace=wrap;html=1;fillColor=#fff2cc;strokeColor=#d6b656;align=left;spacingLeft=8;verticalAlign=middle;fontSize=11;" vertex="1" parent="n57"><mxGeometry x="18" y="824" width="344" height="64" as="geometry"/></mxCell>
<mxCell id="e88" value="" style="edgeStyle=orthogonalEdgeStyle;rounded=0;html=1;exitX=0.5;exitY=1;exitDx=0;exitDy=0;entryX=0.5;entryY=0;entryDx=0;entryDy=0;strokeColor=#4d4d4d;" edge="1" parent="1" source="n85" target="n87"><mxGeometry relative="1" as="geometry"/></mxCell>
<mxCell id="n89" value="&lt;b&gt;while 1 — soak 監控迴圈&lt;/b&gt;&lt;br&gt;setup_pmon.ttl（9 項）&lt;br&gt;bgctl list + jobs&lt;br&gt;&lt;b&gt;pause 60&lt;/b&gt;&lt;br&gt;&lt;i&gt;V1.1.4 起 margin 移到 Script C&lt;/i&gt;" style="rounded=1;whiteSpace=wrap;html=1;fillColor=#d5e8d4;strokeColor=#82b366;align=left;spacingLeft=8;verticalAlign=middle;fontSize=11;" vertex="1" parent="n57"><mxGeometry x="18" y="904" width="344" height="94" as="geometry"/></mxCell>
<mxCell id="e90" value="" style="edgeStyle=orthogonalEdgeStyle;rounded=0;html=1;exitX=0.5;exitY=1;exitDx=0;exitDy=0;entryX=0.5;entryY=0;entryDx=0;entryDy=0;strokeColor=#4d4d4d;" edge="1" parent="1" source="n87" target="n89"><mxGeometry relative="1" as="geometry"/></mxCell>
<mxCell id="n91" value="Script C — Post-test（收尾 / 判定 / 收 log）" style="swimlane;html=1;startSize=34;fillColor=#ffffff;strokeColor=#4d4d4d;fontSize=14;fontStyle=1;horizontal=1;" vertex="1" parent="1"><mxGeometry x="850" y="96" width="380" height="1259" as="geometry"/></mxCell>
<mxCell id="n92" value="&lt;b&gt;include config.ttl&lt;/b&gt;" style="rounded=1;whiteSpace=wrap;html=1;fillColor=#fff2cc;strokeColor=#d6b656;align=left;spacingLeft=8;verticalAlign=middle;fontSize=11;" vertex="1" parent="n91"><mxGeometry x="18" y="44" width="344" height="34" as="geometry"/></mxCell>
<mxCell id="n93" value="&lt;b&gt;Kill Process&lt;/b&gt; utils/kill_all_process.ttl&lt;br&gt;kill $(jobs -p) · bgctl stop --all ×2&lt;br&gt;停 BMC USB service · mgmt_ping stop · &lt;b&gt;nfc stop&lt;/b&gt;" style="rounded=1;whiteSpace=wrap;html=1;fillColor=#f8cecc;strokeColor=#b85450;align=left;spacingLeft=8;verticalAlign=middle;fontSize=11;" vertex="1" parent="n91"><mxGeometry x="18" y="94" width="344" height="64" as="geometry"/></mxCell>
<mxCell id="e94" value="" style="edgeStyle=orthogonalEdgeStyle;rounded=0;html=1;exitX=0.5;exitY=1;exitDx=0;exitDy=0;entryX=0.5;entryY=0;entryDx=0;entryDy=0;strokeColor=#4d4d4d;" edge="1" parent="1" source="n92" target="n93"><mxGeometry relative="1" as="geometry"/></mxCell>
<mxCell id="n95" value="&lt;b&gt;100G PRBS STOP&lt;/b&gt; &lt;i&gt;整段註解&lt;/i&gt;" style="rounded=1;whiteSpace=wrap;html=1;fillColor=#f5f5f5;strokeColor=#999999;dashed=1;align=left;spacingLeft=8;verticalAlign=middle;fontSize=11;fontColor=#808080;" vertex="1" parent="n91"><mxGeometry x="18" y="174" width="344" height="34" as="geometry"/></mxCell>
<mxCell id="e96" value="" style="edgeStyle=orthogonalEdgeStyle;rounded=0;html=1;exitX=0.5;exitY=1;exitDx=0;exitDy=0;entryX=0.5;entryY=0;entryDx=0;entryDy=0;strokeColor=#4d4d4d;" edge="1" parent="1" source="n93" target="n95"><mxGeometry relative="1" as="geometry"/></mxCell>
<mxCell id="n97" value="&lt;b&gt;TAKE DATA&lt;/b&gt; setup_pmon.ttl + show_dmesg.ttl" style="rounded=1;whiteSpace=wrap;html=1;fillColor=#dae8fc;strokeColor=#6c8ebf;align=left;spacingLeft=8;verticalAlign=middle;fontSize=11;" vertex="1" parent="n91"><mxGeometry x="18" y="224" width="344" height="34" as="geometry"/></mxCell>
<mxCell id="e98" value="" style="edgeStyle=orthogonalEdgeStyle;rounded=0;html=1;exitX=0.5;exitY=1;exitDx=0;exitDy=0;entryX=0.5;entryY=0;entryDx=0;entryDy=0;strokeColor=#4d4d4d;" edge="1" parent="1" source="n95" target="n97"><mxGeometry relative="1" as="geometry"/></mxCell>
<mxCell id="n99" value="&lt;b&gt;Check PCIe error counters&lt;/b&gt; ×7（同 Script A）" style="rounded=1;whiteSpace=wrap;html=1;fillColor=#dae8fc;strokeColor=#6c8ebf;align=left;spacingLeft=8;verticalAlign=middle;fontSize=11;" vertex="1" parent="n91"><mxGeometry x="18" y="274" width="344" height="34" as="geometry"/></mxCell>
<mxCell id="e100" value="" style="edgeStyle=orthogonalEdgeStyle;rounded=0;html=1;exitX=0.5;exitY=1;exitDx=0;exitDy=0;entryX=0.5;entryY=0;entryDx=0;entryDy=0;strokeColor=#4d4d4d;" edge="1" parent="1" source="n97" target="n99"><mxGeometry relative="1" as="geometry"/></mxCell>
<mxCell id="n101" value="&lt;b&gt;BMC DDR / BMC Monitor 取值&lt;/b&gt; cat bmc_ddr.log · bmc_poll.log" style="rounded=1;whiteSpace=wrap;html=1;fillColor=#dae8fc;strokeColor=#6c8ebf;align=left;spacingLeft=8;verticalAlign=middle;fontSize=11;" vertex="1" parent="n91"><mxGeometry x="18" y="324" width="344" height="34" as="geometry"/></mxCell>
<mxCell id="e102" value="" style="edgeStyle=orthogonalEdgeStyle;rounded=0;html=1;exitX=0.5;exitY=1;exitDx=0;exitDy=0;entryX=0.5;entryY=0;entryDx=0;entryDy=0;strokeColor=#4d4d4d;" edge="1" parent="1" source="n99" target="n101"><mxGeometry relative="1" as="geometry"/></mxCell>
<mxCell id="n103" value="&lt;b&gt;BMC USB Test result&lt;/b&gt; journalctl" style="rounded=1;whiteSpace=wrap;html=1;fillColor=#dae8fc;strokeColor=#6c8ebf;align=left;spacingLeft=8;verticalAlign=middle;fontSize=11;" vertex="1" parent="n91"><mxGeometry x="18" y="374" width="344" height="34" as="geometry"/></mxCell>
<mxCell id="e104" value="" style="edgeStyle=orthogonalEdgeStyle;rounded=0;html=1;exitX=0.5;exitY=1;exitDx=0;exitDy=0;entryX=0.5;entryY=0;entryDx=0;entryDy=0;strokeColor=#4d4d4d;" edge="1" parent="1" source="n101" target="n103"><mxGeometry relative="1" as="geometry"/></mxCell>
<mxCell id="n105" value="&lt;b&gt;CHECK Stress results&lt;/b&gt;&lt;br&gt;cat mlucas / memtester / ssd / usb log" style="rounded=1;whiteSpace=wrap;html=1;fillColor=#dae8fc;strokeColor=#6c8ebf;align=left;spacingLeft=8;verticalAlign=middle;fontSize=11;" vertex="1" parent="n91"><mxGeometry x="18" y="424" width="344" height="49" as="geometry"/></mxCell>
<mxCell id="e106" value="" style="edgeStyle=orthogonalEdgeStyle;rounded=0;html=1;exitX=0.5;exitY=1;exitDx=0;exitDy=0;entryX=0.5;entryY=0;entryDx=0;entryDy=0;strokeColor=#4d4d4d;" edge="1" parent="1" source="n103" target="n105"><mxGeometry relative="1" as="geometry"/></mxCell>
<mxCell id="n107" value="&lt;b&gt;10G/1G MGMT result&lt;/b&gt; ip -s link show eth0/eth1 · cat log" style="rounded=1;whiteSpace=wrap;html=1;fillColor=#dae8fc;strokeColor=#6c8ebf;align=left;spacingLeft=8;verticalAlign=middle;fontSize=11;" vertex="1" parent="n91"><mxGeometry x="18" y="489" width="344" height="34" as="geometry"/></mxCell>
<mxCell id="e108" value="" style="edgeStyle=orthogonalEdgeStyle;rounded=0;html=1;exitX=0.5;exitY=1;exitDx=0;exitDy=0;entryX=0.5;entryY=0;entryDx=0;entryDy=0;strokeColor=#4d4d4d;" edge="1" parent="1" source="n105" target="n107"><mxGeometry relative="1" as="geometry"/></mxCell>
<mxCell id="n109" value="&lt;b&gt;NFC Test result&lt;/b&gt; nfc_polling.sh report" style="rounded=1;whiteSpace=wrap;html=1;fillColor=#dae8fc;strokeColor=#6c8ebf;align=left;spacingLeft=8;verticalAlign=middle;fontSize=11;" vertex="1" parent="n91"><mxGeometry x="18" y="539" width="344" height="34" as="geometry"/></mxCell>
<mxCell id="e110" value="" style="edgeStyle=orthogonalEdgeStyle;rounded=0;html=1;exitX=0.5;exitY=1;exitDx=0;exitDy=0;entryX=0.5;entryY=0;entryDx=0;entryDy=0;strokeColor=#4d4d4d;" edge="1" parent="1" source="n107" target="n109"><mxGeometry relative="1" as="geometry"/></mxCell>
<mxCell id="n111" value="&lt;b&gt;100G Port&lt;/b&gt; show interfaces status" style="rounded=1;whiteSpace=wrap;html=1;fillColor=#dae8fc;strokeColor=#6c8ebf;align=left;spacingLeft=8;verticalAlign=middle;fontSize=11;" vertex="1" parent="n91"><mxGeometry x="18" y="589" width="344" height="34" as="geometry"/></mxCell>
<mxCell id="e112" value="" style="edgeStyle=orthogonalEdgeStyle;rounded=0;html=1;exitX=0.5;exitY=1;exitDx=0;exitDy=0;entryX=0.5;entryY=0;entryDx=0;entryDy=0;strokeColor=#4d4d4d;" edge="1" parent="1" source="n109" target="n111"><mxGeometry relative="1" as="geometry"/></mxCell>
<mxCell id="n113" value="&lt;b&gt;CHECK Traffic counters&lt;/b&gt;&lt;br&gt;stop → report（per-pair TX/RX + ce0）&lt;br&gt;&lt;i&gt;⟨SWB_UNIT⟩ 兩邊 / -u 0 / -u 1 / skip&lt;/i&gt;" style="rounded=1;whiteSpace=wrap;html=1;fillColor=#fff2cc;strokeColor=#d6b656;align=left;spacingLeft=8;verticalAlign=middle;fontSize=11;" vertex="1" parent="n91"><mxGeometry x="18" y="639" width="344" height="64" as="geometry"/></mxCell>
<mxCell id="e114" value="" style="edgeStyle=orthogonalEdgeStyle;rounded=0;html=1;exitX=0.5;exitY=1;exitDx=0;exitDy=0;entryX=0.5;entryY=0;entryDx=0;entryDy=0;strokeColor=#4d4d4d;" edge="1" parent="1" source="n111" target="n113"><mxGeometry relative="1" as="geometry"/></mxCell>
<mxCell id="n115" value="&lt;b&gt;BER 掃描&lt;/b&gt; blanton_ber.sh&lt;br&gt;init → start → &lt;b&gt;sleep 30&lt;/b&gt; → report → stop → clear&lt;br&gt;&lt;i&gt;⟨SWB_UNIT⟩ · sleep 30 要與 BER_INTERVAL 同步&lt;/i&gt;" style="rounded=1;whiteSpace=wrap;html=1;fillColor=#fff2cc;strokeColor=#d6b656;align=left;spacingLeft=8;verticalAlign=middle;fontSize=11;" vertex="1" parent="n91"><mxGeometry x="18" y="719" width="344" height="64" as="geometry"/></mxCell>
<mxCell id="e116" value="" style="edgeStyle=orthogonalEdgeStyle;rounded=0;html=1;exitX=0.5;exitY=1;exitDx=0;exitDy=0;entryX=0.5;entryY=0;entryDx=0;entryDy=0;strokeColor=#4d4d4d;" edge="1" parent="1" source="n113" target="n115"><mxGeometry relative="1" as="geometry"/></mxCell>
<mxCell id="n117" value="&lt;b&gt;NVMe Err Info&lt;/b&gt; nvme smart-log · smartctl -x" style="rounded=1;whiteSpace=wrap;html=1;fillColor=#dae8fc;strokeColor=#6c8ebf;align=left;spacingLeft=8;verticalAlign=middle;fontSize=11;" vertex="1" parent="n91"><mxGeometry x="18" y="799" width="344" height="34" as="geometry"/></mxCell>
<mxCell id="e118" value="" style="edgeStyle=orthogonalEdgeStyle;rounded=0;html=1;exitX=0.5;exitY=1;exitDx=0;exitDy=0;entryX=0.5;entryY=0;entryDx=0;entryDy=0;strokeColor=#4d4d4d;" edge="1" parent="1" source="n115" target="n117"><mxGeometry relative="1" as="geometry"/></mxCell>
<mxCell id="n119" value="&lt;b&gt;show reboot-cause&lt;/b&gt;" style="rounded=1;whiteSpace=wrap;html=1;fillColor=#dae8fc;strokeColor=#6c8ebf;align=left;spacingLeft=8;verticalAlign=middle;fontSize=11;" vertex="1" parent="n91"><mxGeometry x="18" y="849" width="344" height="34" as="geometry"/></mxCell>
<mxCell id="e120" value="" style="edgeStyle=orthogonalEdgeStyle;rounded=0;html=1;exitX=0.5;exitY=1;exitDx=0;exitDy=0;entryX=0.5;entryY=0;entryDx=0;entryDy=0;strokeColor=#4d4d4d;" edge="1" parent="1" source="n117" target="n119"><mxGeometry relative="1" as="geometry"/></mxCell>
<mxCell id="n121" value="&lt;b&gt;Check Margin&lt;/b&gt; margin_status_all.sh（9 顆）&lt;br&gt;&lt;i&gt;⟨EN_Margin = 1⟩ · V1.1.4 從 Script B 移來&lt;/i&gt;" style="rounded=1;whiteSpace=wrap;html=1;fillColor=#fff2cc;strokeColor=#d6b656;align=left;spacingLeft=8;verticalAlign=middle;fontSize=11;" vertex="1" parent="n91"><mxGeometry x="18" y="899" width="344" height="49" as="geometry"/></mxCell>
<mxCell id="e122" value="" style="edgeStyle=orthogonalEdgeStyle;rounded=0;html=1;exitX=0.5;exitY=1;exitDx=0;exitDy=0;entryX=0.5;entryY=0;entryDx=0;entryDy=0;strokeColor=#4d4d4d;" edge="1" parent="1" source="n119" target="n121"><mxGeometry relative="1" as="geometry"/></mxCell>
<mxCell id="n123" value="&lt;b&gt;show uptime&lt;/b&gt;" style="rounded=1;whiteSpace=wrap;html=1;fillColor=#dae8fc;strokeColor=#6c8ebf;align=left;spacingLeft=8;verticalAlign=middle;fontSize=11;" vertex="1" parent="n91"><mxGeometry x="18" y="964" width="344" height="34" as="geometry"/></mxCell>
<mxCell id="e124" value="" style="edgeStyle=orthogonalEdgeStyle;rounded=0;html=1;exitX=0.5;exitY=1;exitDx=0;exitDy=0;entryX=0.5;entryY=0;entryDx=0;entryDy=0;strokeColor=#4d4d4d;" edge="1" parent="1" source="n121" target="n123"><mxGeometry relative="1" as="geometry"/></mxCell>
<mxCell id="n125" value="&lt;b&gt;Copy Stress Log to USB&lt;/b&gt;&lt;br&gt;usb_target.sh → mount → cp 各 log 進 jobs/&lt;br&gt;→ 帶時戳複製到 /mnt/usb/" style="rounded=1;whiteSpace=wrap;html=1;fillColor=#dae8fc;strokeColor=#6c8ebf;align=left;spacingLeft=8;verticalAlign=middle;fontSize=11;" vertex="1" parent="n91"><mxGeometry x="18" y="1014" width="344" height="64" as="geometry"/></mxCell>
<mxCell id="e126" value="" style="edgeStyle=orthogonalEdgeStyle;rounded=0;html=1;exitX=0.5;exitY=1;exitDx=0;exitDy=0;entryX=0.5;entryY=0;entryDx=0;entryDy=0;strokeColor=#4d4d4d;" edge="1" parent="1" source="n123" target="n125"><mxGeometry relative="1" as="geometry"/></mxCell>
<mxCell id="n127" value="&lt;b&gt;exit&lt;/b&gt; → wait 『Script done』&lt;br&gt;離開 hw-test-session 的 shell" style="rounded=1;whiteSpace=wrap;html=1;fillColor=#dae8fc;strokeColor=#6c8ebf;align=left;spacingLeft=8;verticalAlign=middle;fontSize=11;" vertex="1" parent="n91"><mxGeometry x="18" y="1094" width="344" height="49" as="geometry"/></mxCell>
<mxCell id="e128" value="" style="edgeStyle=orthogonalEdgeStyle;rounded=0;html=1;exitX=0.5;exitY=1;exitDx=0;exitDy=0;entryX=0.5;entryY=0;entryDx=0;entryDy=0;strokeColor=#4d4d4d;" edge="1" parent="1" source="n125" target="n127"><mxGeometry relative="1" as="geometry"/></mxCell>
<mxCell id="n129" value="&lt;b&gt;hw-test-session finish&lt;/b&gt; · bgctl reset --yes" style="rounded=1;whiteSpace=wrap;html=1;fillColor=#dae8fc;strokeColor=#6c8ebf;align=left;spacingLeft=8;verticalAlign=middle;fontSize=11;" vertex="1" parent="n91"><mxGeometry x="18" y="1159" width="344" height="34" as="geometry"/></mxCell>
<mxCell id="e130" value="" style="edgeStyle=orthogonalEdgeStyle;rounded=0;html=1;exitX=0.5;exitY=1;exitDx=0;exitDy=0;entryX=0.5;entryY=0;entryDx=0;entryDy=0;strokeColor=#4d4d4d;" edge="1" parent="1" source="n127" target="n129"><mxGeometry relative="1" as="geometry"/></mxCell>
<mxCell id="n131" value="messagebox 『GOOD JOB! Test Case DONE』" style="rounded=1;whiteSpace=wrap;html=1;fillColor=#ffe6cc;strokeColor=#d79b00;align=center;verticalAlign=middle;fontSize=11;fontStyle=1;" vertex="1" parent="n91"><mxGeometry x="18" y="1209" width="344" height="34" as="geometry"/></mxCell>
<mxCell id="e132" value="" style="edgeStyle=orthogonalEdgeStyle;rounded=0;html=1;exitX=0.5;exitY=1;exitDx=0;exitDy=0;entryX=0.5;entryY=0;entryDx=0;entryDy=0;strokeColor=#4d4d4d;" edge="1" parent="1" source="n129" target="n131"><mxGeometry relative="1" as="geometry"/></mxCell>
<mxCell id="n133" value="Script 4 — Thermal &amp;amp; Safety（獨立跑，不接 A/B/C）" style="swimlane;html=1;startSize=34;fillColor=#ffffff;strokeColor=#4d4d4d;fontSize=14;fontStyle=1;horizontal=1;" vertex="1" parent="1"><mxGeometry x="1260" y="96" width="380" height="929" as="geometry"/></mxCell>
<mxCell id="n134" value="&lt;b&gt;include config.ttl&lt;/b&gt;" style="rounded=1;whiteSpace=wrap;html=1;fillColor=#fff2cc;strokeColor=#d6b656;align=left;spacingLeft=8;verticalAlign=middle;fontSize=11;" vertex="1" parent="n133"><mxGeometry x="18" y="44" width="344" height="34" as="geometry"/></mxCell>
<mxCell id="n135" value="&lt;b&gt;logopen&lt;/b&gt; &lt;i&gt;⟨EN_log = 1⟩&lt;/i&gt;" style="rounded=1;whiteSpace=wrap;html=1;fillColor=#fff2cc;strokeColor=#d6b656;align=left;spacingLeft=8;verticalAlign=middle;fontSize=11;" vertex="1" parent="n133"><mxGeometry x="18" y="94" width="344" height="34" as="geometry"/></mxCell>
<mxCell id="e136" value="" style="edgeStyle=orthogonalEdgeStyle;rounded=0;html=1;exitX=0.5;exitY=1;exitDx=0;exitDy=0;entryX=0.5;entryY=0;entryDx=0;entryDy=0;strokeColor=#4d4d4d;" edge="1" parent="1" source="n134" target="n135"><mxGeometry relative="1" as="geometry"/></mxCell>
<mxCell id="n137" value="&lt;b&gt;Root Login&lt;/b&gt; → sudo -i" style="rounded=1;whiteSpace=wrap;html=1;fillColor=#dae8fc;strokeColor=#6c8ebf;align=left;spacingLeft=8;verticalAlign=middle;fontSize=11;" vertex="1" parent="n133"><mxGeometry x="18" y="144" width="344" height="34" as="geometry"/></mxCell>
<mxCell id="e138" value="" style="edgeStyle=orthogonalEdgeStyle;rounded=0;html=1;exitX=0.5;exitY=1;exitDx=0;exitDy=0;entryX=0.5;entryY=0;entryDx=0;entryDy=0;strokeColor=#4d4d4d;" edge="1" parent="1" source="n135" target="n137"><mxGeometry relative="1" as="geometry"/></mxCell>
<mxCell id="n139" value="&lt;b&gt;Pre Setting&lt;/b&gt; mkdir ./logs · date -s · rm jobs/*" style="rounded=1;whiteSpace=wrap;html=1;fillColor=#dae8fc;strokeColor=#6c8ebf;align=left;spacingLeft=8;verticalAlign=middle;fontSize=11;" vertex="1" parent="n133"><mxGeometry x="18" y="194" width="344" height="34" as="geometry"/></mxCell>
<mxCell id="e140" value="" style="edgeStyle=orthogonalEdgeStyle;rounded=0;html=1;exitX=0.5;exitY=1;exitDx=0;exitDy=0;entryX=0.5;entryY=0;entryDx=0;entryDy=0;strokeColor=#4d4d4d;" edge="1" parent="1" source="n137" target="n139"><mxGeometry relative="1" as="geometry"/></mxCell>
<mxCell id="n141" value="&lt;b&gt;HW Test Session&lt;/b&gt; finish → bgctl reset/stop --all → list&lt;br&gt;→ start → log → status" style="rounded=1;whiteSpace=wrap;html=1;fillColor=#f8cecc;strokeColor=#b85450;align=left;spacingLeft=8;verticalAlign=middle;fontSize=11;" vertex="1" parent="n133"><mxGeometry x="18" y="244" width="344" height="49" as="geometry"/></mxCell>
<mxCell id="e142" value="" style="edgeStyle=orthogonalEdgeStyle;rounded=0;html=1;exitX=0.5;exitY=1;exitDx=0;exitDy=0;entryX=0.5;entryY=0;entryDx=0;entryDy=0;strokeColor=#4d4d4d;" edge="1" parent="1" source="n139" target="n141"><mxGeometry relative="1" as="geometry"/></mxCell>
<mxCell id="n143" value="&lt;b&gt;FAN SPEED&lt;/b&gt; max31790 rebind ×2 → fan-speed-control.sh" style="rounded=1;whiteSpace=wrap;html=1;fillColor=#dae8fc;strokeColor=#6c8ebf;align=left;spacingLeft=8;verticalAlign=middle;fontSize=11;" vertex="1" parent="n133"><mxGeometry x="18" y="309" width="344" height="34" as="geometry"/></mxCell>
<mxCell id="e144" value="" style="edgeStyle=orthogonalEdgeStyle;rounded=0;html=1;exitX=0.5;exitY=1;exitDx=0;exitDy=0;entryX=0.5;entryY=0;entryDx=0;entryDy=0;strokeColor=#4d4d4d;" edge="1" parent="1" source="n141" target="n143"><mxGeometry relative="1" as="geometry"/></mxCell>
<mxCell id="n145" value="&lt;b&gt;Wait DUT Init&lt;/b&gt; utils/wait_init.ttl&lt;br&gt;&lt;i&gt;無逾時出口&lt;/i&gt;" style="rounded=1;whiteSpace=wrap;html=1;fillColor=#fff2cc;strokeColor=#d6b656;align=left;spacingLeft=8;verticalAlign=middle;fontSize=11;" vertex="1" parent="n133"><mxGeometry x="18" y="359" width="344" height="49" as="geometry"/></mxCell>
<mxCell id="e146" value="" style="edgeStyle=orthogonalEdgeStyle;rounded=0;html=1;exitX=0.5;exitY=1;exitDx=0;exitDy=0;entryX=0.5;entryY=0;entryDx=0;entryDy=0;strokeColor=#4d4d4d;" edge="1" parent="1" source="n143" target="n145"><mxGeometry relative="1" as="geometry"/></mxCell>
<mxCell id="n147" value="&lt;b&gt;DUT Info&lt;/b&gt; boot/version/fwutil/system-memory/service&lt;br&gt;syseeprom · ssdhealth · TPM · NVMe" style="rounded=1;whiteSpace=wrap;html=1;fillColor=#dae8fc;strokeColor=#6c8ebf;align=left;spacingLeft=8;verticalAlign=middle;fontSize=11;" vertex="1" parent="n133"><mxGeometry x="18" y="424" width="344" height="49" as="geometry"/></mxCell>
<mxCell id="e148" value="" style="edgeStyle=orthogonalEdgeStyle;rounded=0;html=1;exitX=0.5;exitY=1;exitDx=0;exitDy=0;entryX=0.5;entryY=0;entryDx=0;entryDy=0;strokeColor=#4d4d4d;" edge="1" parent="1" source="n145" target="n147"><mxGeometry relative="1" as="geometry"/></mxCell>
<mxCell id="n149" value="&lt;b&gt;BMC&lt;/b&gt; enroll · version · status" style="rounded=1;whiteSpace=wrap;html=1;fillColor=#dae8fc;strokeColor=#6c8ebf;align=left;spacingLeft=8;verticalAlign=middle;fontSize=11;" vertex="1" parent="n133"><mxGeometry x="18" y="489" width="344" height="34" as="geometry"/></mxCell>
<mxCell id="e150" value="" style="edgeStyle=orthogonalEdgeStyle;rounded=0;html=1;exitX=0.5;exitY=1;exitDx=0;exitDy=0;entryX=0.5;entryY=0;entryDx=0;entryDy=0;strokeColor=#4d4d4d;" edge="1" parent="1" source="n147" target="n149"><mxGeometry relative="1" as="geometry"/></mxCell>
<mxCell id="n151" value="&lt;b&gt;CLEAR PCIe Error&lt;/b&gt; ×7 + ras-mc-ctl --summary" style="rounded=1;whiteSpace=wrap;html=1;fillColor=#dae8fc;strokeColor=#6c8ebf;align=left;spacingLeft=8;verticalAlign=middle;fontSize=11;" vertex="1" parent="n133"><mxGeometry x="18" y="539" width="344" height="34" as="geometry"/></mxCell>
<mxCell id="e152" value="" style="edgeStyle=orthogonalEdgeStyle;rounded=0;html=1;exitX=0.5;exitY=1;exitDx=0;exitDy=0;entryX=0.5;entryY=0;entryDx=0;entryDy=0;strokeColor=#4d4d4d;" edge="1" parent="1" source="n149" target="n151"><mxGeometry relative="1" as="geometry"/></mxCell>
<mxCell id="n153" value="&lt;b&gt;PCIe tree / link / bandwidth&lt;/b&gt;" style="rounded=1;whiteSpace=wrap;html=1;fillColor=#dae8fc;strokeColor=#6c8ebf;align=left;spacingLeft=8;verticalAlign=middle;fontSize=11;" vertex="1" parent="n133"><mxGeometry x="18" y="589" width="344" height="34" as="geometry"/></mxCell>
<mxCell id="e154" value="" style="edgeStyle=orthogonalEdgeStyle;rounded=0;html=1;exitX=0.5;exitY=1;exitDx=0;exitDy=0;entryX=0.5;entryY=0;entryDx=0;entryDy=0;strokeColor=#4d4d4d;" edge="1" parent="1" source="n151" target="n153"><mxGeometry relative="1" as="geometry"/></mxCell>
<mxCell id="n155" value="&lt;b&gt;TAKE DATA&lt;/b&gt; setup_pmon.ttl + show_dmesg.ttl" style="rounded=1;whiteSpace=wrap;html=1;fillColor=#dae8fc;strokeColor=#6c8ebf;align=left;spacingLeft=8;verticalAlign=middle;fontSize=11;" vertex="1" parent="n133"><mxGeometry x="18" y="639" width="344" height="34" as="geometry"/></mxCell>
<mxCell id="e156" value="" style="edgeStyle=orthogonalEdgeStyle;rounded=0;html=1;exitX=0.5;exitY=1;exitDx=0;exitDy=0;entryX=0.5;entryY=0;entryDx=0;entryDy=0;strokeColor=#4d4d4d;" edge="1" parent="1" source="n153" target="n155"><mxGeometry relative="1" as="geometry"/></mxCell>
<mxCell id="n157" value="&lt;b&gt;Full Load — CPU&lt;/b&gt;&lt;br&gt;chmod +x → mlucas-avx2 -s l -cpu 0:15 &amp;amp;" style="rounded=1;whiteSpace=wrap;html=1;fillColor=#dae8fc;strokeColor=#6c8ebf;align=left;spacingLeft=8;verticalAlign=middle;fontSize=11;" vertex="1" parent="n133"><mxGeometry x="18" y="689" width="344" height="49" as="geometry"/></mxCell>
<mxCell id="e158" value="" style="edgeStyle=orthogonalEdgeStyle;rounded=0;html=1;exitX=0.5;exitY=1;exitDx=0;exitDy=0;entryX=0.5;entryY=0;entryDx=0;entryDy=0;strokeColor=#4d4d4d;" edge="1" parent="1" source="n155" target="n157"><mxGeometry relative="1" as="geometry"/></mxCell>
<mxCell id="n159" value="&lt;b&gt;Full Load — 資料面&lt;/b&gt;&lt;br&gt;blanton_tr518.sh start（含 120s settle）" style="rounded=1;whiteSpace=wrap;html=1;fillColor=#f8cecc;strokeColor=#b85450;align=left;spacingLeft=8;verticalAlign=middle;fontSize=11;" vertex="1" parent="n133"><mxGeometry x="18" y="754" width="344" height="49" as="geometry"/></mxCell>
<mxCell id="e160" value="" style="edgeStyle=orthogonalEdgeStyle;rounded=0;html=1;exitX=0.5;exitY=1;exitDx=0;exitDy=0;entryX=0.5;entryY=0;entryDx=0;entryDy=0;strokeColor=#4d4d4d;" edge="1" parent="1" source="n157" target="n159"><mxGeometry relative="1" as="geometry"/></mxCell>
<mxCell id="n161" value="&lt;b&gt;while 1 — 熱 / 安規監控迴圈&lt;/b&gt;&lt;br&gt;setup_pmon.ttl（9 項）&lt;br&gt;TH6_SWB0 / SWB1_power_readback.sh&lt;br&gt;bgctl list + jobs&lt;br&gt;&lt;b&gt;pause 60&lt;/b&gt;" style="rounded=1;whiteSpace=wrap;html=1;fillColor=#d5e8d4;strokeColor=#82b366;align=left;spacingLeft=8;verticalAlign=middle;fontSize=11;" vertex="1" parent="n133"><mxGeometry x="18" y="819" width="344" height="94" as="geometry"/></mxCell>
<mxCell id="e162" value="" style="edgeStyle=orthogonalEdgeStyle;rounded=0;html=1;exitX=0.5;exitY=1;exitDx=0;exitDy=0;entryX=0.5;entryY=0;entryDx=0;entryDy=0;strokeColor=#4d4d4d;" edge="1" parent="1" source="n159" target="n161"><mxGeometry relative="1" as="geometry"/></mxCell>
<mxCell id="e163" value="人工啟動 Script B" style="edgeStyle=orthogonalEdgeStyle;rounded=1;html=1;strokeColor=#d79b00;strokeWidth=2;dashed=1;fontSize=10;fontColor=#d79b00;" edge="1" parent="1" source="n55" target="n58"><mxGeometry relative="1" as="geometry"/></mxCell>
<mxCell id="e164" value="soak 結束後人工中斷，啟動 Script C" style="edgeStyle=orthogonalEdgeStyle;rounded=1;html=1;strokeColor=#d79b00;strokeWidth=2;dashed=1;fontSize=10;fontColor=#d79b00;" edge="1" parent="1" source="n89" target="n92"><mxGeometry relative="1" as="geometry"/></mxCell>
<mxCell id="n165" value="圖例" style="text;html=1;align=left;verticalAlign=middle;fontSize=13;fontStyle=1;" vertex="1" parent="1"><mxGeometry x="30" y="1585" width="200" height="24" as="geometry"/></mxCell>
<mxCell id="n166" value="一般步驟" style="rounded=1;whiteSpace=wrap;html=1;fillColor=#dae8fc;strokeColor=#6c8ebf;align=left;spacingLeft=8;verticalAlign=middle;fontSize=11;" vertex="1" parent="1"><mxGeometry x="30" y="1613" width="230" height="32" as="geometry"/></mxCell>
<mxCell id="n167" value="受 config.ttl 旗標影響" style="rounded=1;whiteSpace=wrap;html=1;fillColor=#fff2cc;strokeColor=#d6b656;align=left;spacingLeft=8;verticalAlign=middle;fontSize=11;" vertex="1" parent="1"><mxGeometry x="280" y="1613" width="230" height="32" as="geometry"/></mxCell>
<mxCell id="n168" value="迴圈 / 持續執行" style="rounded=1;whiteSpace=wrap;html=1;fillColor=#d5e8d4;strokeColor=#82b366;align=left;spacingLeft=8;verticalAlign=middle;fontSize=11;" vertex="1" parent="1"><mxGeometry x="530" y="1613" width="230" height="32" as="geometry"/></mxCell>
<mxCell id="n169" value="目前註解停用" style="rounded=1;whiteSpace=wrap;html=1;fillColor=#f5f5f5;strokeColor=#999999;dashed=1;align=left;spacingLeft=8;verticalAlign=middle;fontSize=11;fontColor=#808080;" vertex="1" parent="1"><mxGeometry x="30" y="1655" width="230" height="32" as="geometry"/></mxCell>
<mxCell id="n170" value="狀態變更 / 需留意" style="rounded=1;whiteSpace=wrap;html=1;fillColor=#f8cecc;strokeColor=#b85450;align=left;spacingLeft=8;verticalAlign=middle;fontSize=11;" vertex="1" parent="1"><mxGeometry x="280" y="1655" width="230" height="32" as="geometry"/></mxCell>
<mxCell id="n171" value="人工交接點" style="rounded=1;whiteSpace=wrap;html=1;fillColor=#ffe6cc;strokeColor=#d79b00;align=center;verticalAlign=middle;fontSize=11;fontStyle=1;" vertex="1" parent="1"><mxGeometry x="530" y="1655" width="230" height="32" as="geometry"/></mxCell>
<mxCell id="n172" value="⚠️ 已知待辦：① 100G PRBS 三支腳本內呼叫仍註解（bring-up 中）　② wait_init.ttl 與風扇確認 wait 沒有逾時出口，起不來會無限等待　③ Script C 的 sleep 30 需與 blanton_ber.sh 的 BER_INTERVAL 同步　④ Script 4 沒有收尾段：中斷後 tr518 留下 port cd lb=mac / l2 learn off / test mode nr=yes，需手動 blanton_tr518.sh stop" style="text;html=1;align=left;verticalAlign=top;fontSize=11;fontColor=#b85450;" vertex="1" parent="1"><mxGeometry x="30" y="1703" width="1610" height="46" as="geometry"/></mxCell>
</root>
</mxGraphModel>
</diagram>
</mxfile>
docs/LTC2980_channel_map.csv
+86 -86
View File
@@ -6,7 +6,7 @@ CB,CONN13,CH3,V1P8_ALW,1.8
CB,CONN13,CH4,PWR_APU_VDDIO_SUS,1.1
CB,CONN13,CH5,PWR_VDD_MISC_RUN,0.75
CB,CONN13,CH6,PWR_APU_VDD_MEM_RUN,0.78
CB,CONN13,CH7,V0P8_PHY2_DVDD,0.8
CB,CONN13,CH7,V0P8_PHY2_DVDD,0.816
CB,CONN13,CH8,V0P8_AVDD,0.8
CB,CONN13,CH9,V0P8_PHY,0.8
CB,CONN13,CH10,V1P8_FPGA,1.8
@@ -14,132 +14,132 @@ CB,CONN13,CH11,V2P5_FPGA,2.5
CB,CONN13,CH12,V1P1_FPGA,1.1
CB,CONN13,CH13,P5V_STBY,5.0
CB,CONN13,CH14,P3V3_STBY,3.3
CB,CONN13,CH15,V0P8_PHY2_AVDD,0.8
CB,CONN13,CH15,V0P8_PHY2_AVDD,0.816
SWB0,CONN13,CH0,P0V75_DVDD_47,0.75
SWB0,CONN13,CH1,P0V75_AVDD_47,0.75
SWB0,CONN13,CH2,P1V5_AVDD_47,1.5
SWB0,CONN13,CH3,P0V9_AVDD_47,0.9
SWB0,CONN13,CH4,P1V8_1,1.8
SWB0,CONN13,CH5,PVDD3_3V_SYNTH_LDO_A3,3.3
SWB0,CONN13,CH6,PVDD3_3V_SYNTH_LDO_B1,3.3
SWB0,CONN13,CH7,P1V8_3,1.8
SWB0,CONN13,CH1,P0V75_AVDD_47,0.756
SWB0,CONN13,CH2,P1V5_AVDD_47,1.524
SWB0,CONN13,CH3,P0V9_AVDD_47,0.915
SWB0,CONN13,CH4,P1V8_1,1.816
SWB0,CONN13,CH5,PVDD3_3V_SYNTH_LDO_A3,3.38
SWB0,CONN13,CH6,PVDD3_3V_SYNTH_LDO_B1,3.38
SWB0,CONN13,CH7,P1V8_3,1.816
SWB0,CONN13,CH8,P1V8_DVDDIO_3,1.8
SWB0,CONN13,CH9,P0V75_DVDD_39,0.75
SWB0,CONN13,CH10,P0V75_AVDD_39,0.75
SWB0,CONN13,CH11,P1V5_AVDD_39,1.5
SWB0,CONN13,CH12,P0V9_AVDD_39,0.9
SWB0,CONN13,CH10,P0V75_AVDD_39,0.756
SWB0,CONN13,CH11,P1V5_AVDD_39,1.524
SWB0,CONN13,CH12,P0V9_AVDD_39,0.915
SWB0,CONN13,CH13,PVDD1V5_2,1.5
SWB0,CONN13,CH14,PVDD1V8_DUT,1.8
SWB0,CONN13,CH15,PVDD_MDIO,1.2
SWB0,CONN14,CH0,P0V75_AVDD_7,0.75
SWB0,CONN14,CH1,P1V5_AVDD_7,1.5
SWB0,CONN14,CH2,P0V9_AVDD_7,0.9
SWB0,CONN14,CH3,P1V8_5,1.8
SWB0,CONN14,CH4,P1V8_2,1.8
SWB0,CONN14,CH5,PVDD3_3V_SYNTH_LDO_B2,3.3
SWB0,CONN14,CH6,PVDD3_3V_SYNTH_LDO_A2,3.3
SWB0,CONN14,CH7,PVDD3_3V_SYNTH_LDO_A1,3.3
SWB0,CONN14,CH8,PVDD1V5_TSC,1.5
SWB0,CONN14,CH9,PVDD1V5_ANLG,1.5
SWB0,CONN14,CH0,P0V75_AVDD_7,0.756
SWB0,CONN14,CH1,P1V5_AVDD_7,1.524
SWB0,CONN14,CH2,P0V9_AVDD_7,0.915
SWB0,CONN14,CH3,P1V8_5,1.816
SWB0,CONN14,CH4,P1V8_2,1.816
SWB0,CONN14,CH5,PVDD3_3V_SYNTH_LDO_B2,3.38
SWB0,CONN14,CH6,PVDD3_3V_SYNTH_LDO_A2,3.38
SWB0,CONN14,CH7,PVDD3_3V_SYNTH_LDO_A1,3.38
SWB0,CONN14,CH8,PVDD1V5_TSC,1.516
SWB0,CONN14,CH9,PVDD1V5_ANLG,1.516
SWB0,CONN14,CH10,NC,-
SWB0,CONN14,CH11,NC,-
SWB0,CONN14,CH12,PVDD1V5_1,1.5
SWB0,CONN14,CH13,NC,-
SWB0,CONN14,CH14,P1V8_DVDDIO_1,1.8
SWB0,CONN14,CH15,P0V75_DVDD_7,0.75
SWB0,CONN15,CH0,P1V5_AVDD_55,1.5
SWB0,CONN15,CH1,P0V9_AVDD_55,0.9
SWB0,CONN15,CH0,P1V5_AVDD_55,1.524
SWB0,CONN15,CH1,P0V9_AVDD_55,0.915
SWB0,CONN15,CH2,P0V75_DVDD_63,0.75
SWB0,CONN15,CH3,P0V75_AVDD_63,0.75
SWB0,CONN15,CH4,P1V5_AVDD_63,1.5
SWB0,CONN15,CH5,P0V9_AVDD_63,0.9
SWB0,CONN15,CH6,PVDD3_3V_SYNTH_LDO_B3,3.3
SWB0,CONN15,CH3,P0V75_AVDD_63,0.756
SWB0,CONN15,CH4,P1V5_AVDD_63,1.524
SWB0,CONN15,CH5,P0V9_AVDD_63,0.915
SWB0,CONN15,CH6,PVDD3_3V_SYNTH_LDO_B3,3.38
SWB0,CONN15,CH7,PVDD1V5_3,1.5
SWB0,CONN15,CH8,P0V85_STBY,0.85
SWB0,CONN15,CH9,P1V8_STBY,1.8
SWB0,CONN15,CH10,NC,-
SWB0,CONN15,CH11,P3V3_STBY,3.3
SWB0,CONN15,CH12,PVDD0V9_2,0.9
SWB0,CONN15,CH12,PVDD0V9_2,0.91
SWB0,CONN15,CH13,P0V75_DVDD_55,0.75
SWB0,CONN15,CH14,P0V75_AVDD_55,0.75
SWB0,CONN15,CH14,P0V75_AVDD_55,0.756
SWB0,CONN15,CH15,P1V8_DVDDIO_4,1.8
SWB0,CONN16,CH0,PVDD1V5_0,1.5
SWB0,CONN16,CH1,P1V8_4,1.8
SWB0,CONN16,CH2,PVDD3_3V_SYNTH_LDO_B5,3.3
SWB0,CONN16,CH3,PVDD3_3V_SYNTH_LDO_A5,3.3
SWB0,CONN16,CH4,PVDD3_3V_SYNTH_LDO_B4,3.3
SWB0,CONN16,CH5,PVDD3_3V_SYNTH_LDO_A4,3.3
SWB0,CONN16,CH6,P3V3,3.3
SWB0,CONN16,CH7,PVDD0_8V_T3,0.8
SWB0,CONN16,CH1,P1V8_4,1.816
SWB0,CONN16,CH2,PVDD3_3V_SYNTH_LDO_B5,3.38
SWB0,CONN16,CH3,PVDD3_3V_SYNTH_LDO_A5,3.38
SWB0,CONN16,CH4,PVDD3_3V_SYNTH_LDO_B4,3.38
SWB0,CONN16,CH5,PVDD3_3V_SYNTH_LDO_A4,3.38
SWB0,CONN16,CH6,P3V3,3.327
SWB0,CONN16,CH7,PVDD0_8V_T3,0.82
SWB0,CONN16,CH8,P0V75_DVDD_1,0.75
SWB0,CONN16,CH9,P0V75_AVDD_1,0.75
SWB0,CONN16,CH10,P1V5_AVDD_1,1.5
SWB0,CONN16,CH11,P0V9_AVDD_1,0.9
SWB0,CONN16,CH12,PVDD0V9_0,0.9
SWB0,CONN16,CH13,PVDD0V9_1,0.9
SWB0,CONN16,CH14,PVDD0V9_3,0.9
SWB0,CONN16,CH15,PVDD1V2_T3,1.2
SWB0,CONN16,CH9,P0V75_AVDD_1,0.756
SWB0,CONN16,CH10,P1V5_AVDD_1,1.524
SWB0,CONN16,CH11,P0V9_AVDD_1,0.915
SWB0,CONN16,CH12,PVDD0V9_0,0.915
SWB0,CONN16,CH13,PVDD0V9_1,0.91
SWB0,CONN16,CH14,PVDD0V9_3,0.915
SWB0,CONN16,CH15,PVDD1V2_T3,1.224
SWB1,CONN13,CH0,P0V75_DVDD_47,0.75
SWB1,CONN13,CH1,P0V75_AVDD_47,0.75
SWB1,CONN13,CH2,P1V5_AVDD_47,1.5
SWB1,CONN13,CH3,P0V9_AVDD_47,0.9
SWB1,CONN13,CH4,P1V8_1,1.8
SWB1,CONN13,CH5,PVDD3_3V_SYNTH_LDO_A3,3.3
SWB1,CONN13,CH6,PVDD3_3V_SYNTH_LDO_B1,3.3
SWB1,CONN13,CH7,P1V8_3,1.8
SWB1,CONN13,CH1,P0V75_AVDD_47,0.756
SWB1,CONN13,CH2,P1V5_AVDD_47,1.524
SWB1,CONN13,CH3,P0V9_AVDD_47,0.915
SWB1,CONN13,CH4,P1V8_1,1.816
SWB1,CONN13,CH5,PVDD3_3V_SYNTH_LDO_A3,3.38
SWB1,CONN13,CH6,PVDD3_3V_SYNTH_LDO_B1,3.38
SWB1,CONN13,CH7,P1V8_3,1.816
SWB1,CONN13,CH8,P1V8_DVDDIO_3,1.8
SWB1,CONN13,CH9,P0V75_DVDD_39,0.75
SWB1,CONN13,CH10,P0V75_AVDD_39,0.75
SWB1,CONN13,CH11,P1V5_AVDD_39,1.5
SWB1,CONN13,CH12,P0V9_AVDD_39,0.9
SWB1,CONN13,CH10,P0V75_AVDD_39,0.756
SWB1,CONN13,CH11,P1V5_AVDD_39,1.524
SWB1,CONN13,CH12,P0V9_AVDD_39,0.915
SWB1,CONN13,CH13,PVDD1V5_2,1.5
SWB1,CONN13,CH14,PVDD1V8_DUT,1.8
SWB1,CONN13,CH15,PVDD_MDIO,1.2
SWB1,CONN14,CH0,P0V75_AVDD_7,0.75
SWB1,CONN14,CH1,P1V5_AVDD_7,1.5
SWB1,CONN14,CH2,P0V9_AVDD_7,0.9
SWB1,CONN14,CH3,P1V8_5,1.8
SWB1,CONN14,CH4,P1V8_2,1.8
SWB1,CONN14,CH5,PVDD3_3V_SYNTH_LDO_B2,3.3
SWB1,CONN14,CH6,PVDD3_3V_SYNTH_LDO_A2,3.3
SWB1,CONN14,CH7,PVDD3_3V_SYNTH_LDO_A1,3.3
SWB1,CONN14,CH8,PVDD1V5_TSC,1.5
SWB1,CONN14,CH9,PVDD1V5_ANLG,1.5
SWB1,CONN14,CH0,P0V75_AVDD_7,0.756
SWB1,CONN14,CH1,P1V5_AVDD_7,1.524
SWB1,CONN14,CH2,P0V9_AVDD_7,0.915
SWB1,CONN14,CH3,P1V8_5,1.816
SWB1,CONN14,CH4,P1V8_2,1.816
SWB1,CONN14,CH5,PVDD3_3V_SYNTH_LDO_B2,3.38
SWB1,CONN14,CH6,PVDD3_3V_SYNTH_LDO_A2,3.38
SWB1,CONN14,CH7,PVDD3_3V_SYNTH_LDO_A1,3.38
SWB1,CONN14,CH8,PVDD1V5_TSC,1.516
SWB1,CONN14,CH9,PVDD1V5_ANLG,1.516
SWB1,CONN14,CH10,NC,-
SWB1,CONN14,CH11,NC,-
SWB1,CONN14,CH12,PVDD1V5_1,1.5
SWB1,CONN14,CH13,NC,-
SWB1,CONN14,CH14,P1V8_DVDDIO_1,1.8
SWB1,CONN14,CH15,P0V75_DVDD_7,0.75
SWB1,CONN15,CH0,P1V5_AVDD_55,1.5
SWB1,CONN15,CH1,P0V9_AVDD_55,0.9
SWB1,CONN15,CH0,P1V5_AVDD_55,1.524
SWB1,CONN15,CH1,P0V9_AVDD_55,0.915
SWB1,CONN15,CH2,P0V75_DVDD_63,0.75
SWB1,CONN15,CH3,P0V75_AVDD_63,0.75
SWB1,CONN15,CH4,P1V5_AVDD_63,1.5
SWB1,CONN15,CH5,P0V9_AVDD_63,0.9
SWB1,CONN15,CH6,PVDD3_3V_SYNTH_LDO_B3,3.3
SWB1,CONN15,CH3,P0V75_AVDD_63,0.756
SWB1,CONN15,CH4,P1V5_AVDD_63,1.524
SWB1,CONN15,CH5,P0V9_AVDD_63,0.915
SWB1,CONN15,CH6,PVDD3_3V_SYNTH_LDO_B3,3.38
SWB1,CONN15,CH7,PVDD1V5_3,1.5
SWB1,CONN15,CH8,P0V85_STBY,0.85
SWB1,CONN15,CH9,P1V8_STBY,1.8
SWB1,CONN15,CH10,NC,-
SWB1,CONN15,CH11,P3V3_STBY,3.3
SWB1,CONN15,CH12,PVDD0V9_2,0.9
SWB1,CONN15,CH12,PVDD0V9_2,0.91
SWB1,CONN15,CH13,P0V75_DVDD_55,0.75
SWB1,CONN15,CH14,P0V75_AVDD_55,0.75
SWB1,CONN15,CH14,P0V75_AVDD_55,0.756
SWB1,CONN15,CH15,P1V8_DVDDIO_4,1.8
SWB1,CONN16,CH0,PVDD1V5_0,1.5
SWB1,CONN16,CH1,P1V8_4,1.8
SWB1,CONN16,CH2,PVDD3_3V_SYNTH_LDO_B5,3.3
SWB1,CONN16,CH3,PVDD3_3V_SYNTH_LDO_A5,3.3
SWB1,CONN16,CH4,PVDD3_3V_SYNTH_LDO_B4,3.3
SWB1,CONN16,CH5,PVDD3_3V_SYNTH_LDO_A4,3.3
SWB1,CONN16,CH6,P3V3,3.3
SWB1,CONN16,CH7,PVDD0_8V_T3,0.8
SWB1,CONN16,CH1,P1V8_4,1.816
SWB1,CONN16,CH2,PVDD3_3V_SYNTH_LDO_B5,3.38
SWB1,CONN16,CH3,PVDD3_3V_SYNTH_LDO_A5,3.38
SWB1,CONN16,CH4,PVDD3_3V_SYNTH_LDO_B4,3.38
SWB1,CONN16,CH5,PVDD3_3V_SYNTH_LDO_A4,3.38
SWB1,CONN16,CH6,P3V3,3.327
SWB1,CONN16,CH7,PVDD0_8V_T3,0.82
SWB1,CONN16,CH8,P0V75_DVDD_1,0.75
SWB1,CONN16,CH9,P0V75_AVDD_1,0.75
SWB1,CONN16,CH10,P1V5_AVDD_1,1.5
SWB1,CONN16,CH11,P0V9_AVDD_1,0.9
SWB1,CONN16,CH12,PVDD0V9_0,0.9
SWB1,CONN16,CH13,PVDD0V9_1,0.9
SWB1,CONN16,CH14,PVDD0V9_3,0.9
SWB1,CONN16,CH15,PVDD1V2_T3,1.2
SWB1,CONN16,CH9,P0V75_AVDD_1,0.756
SWB1,CONN16,CH10,P1V5_AVDD_1,1.524
SWB1,CONN16,CH11,P0V9_AVDD_1,0.915
SWB1,CONN16,CH12,PVDD0V9_0,0.915
SWB1,CONN16,CH13,PVDD0V9_1,0.91
SWB1,CONN16,CH14,PVDD0V9_3,0.915
SWB1,CONN16,CH15,PVDD1V2_T3,1.224
1 Board CONN Ch NetName Vnom
6 CB CONN13 CH4 PWR_APU_VDDIO_SUS 1.1
7 CB CONN13 CH5 PWR_VDD_MISC_RUN 0.75
8 CB CONN13 CH6 PWR_APU_VDD_MEM_RUN 0.78
9 CB CONN13 CH7 V0P8_PHY2_DVDD 0.8 0.816
10 CB CONN13 CH8 V0P8_AVDD 0.8
11 CB CONN13 CH9 V0P8_PHY 0.8
12 CB CONN13 CH10 V1P8_FPGA 1.8
14 CB CONN13 CH12 V1P1_FPGA 1.1
15 CB CONN13 CH13 P5V_STBY 5.0
16 CB CONN13 CH14 P3V3_STBY 3.3
17 CB CONN13 CH15 V0P8_PHY2_AVDD 0.8 0.816
18 SWB0 CONN13 CH0 P0V75_DVDD_47 0.75
19 SWB0 CONN13 CH1 P0V75_AVDD_47 0.75 0.756
20 SWB0 CONN13 CH2 P1V5_AVDD_47 1.5 1.524
21 SWB0 CONN13 CH3 P0V9_AVDD_47 0.9 0.915
22 SWB0 CONN13 CH4 P1V8_1 1.8 1.816
23 SWB0 CONN13 CH5 PVDD3_3V_SYNTH_LDO_A3 3.3 3.38
24 SWB0 CONN13 CH6 PVDD3_3V_SYNTH_LDO_B1 3.3 3.38
25 SWB0 CONN13 CH7 P1V8_3 1.8 1.816
26 SWB0 CONN13 CH8 P1V8_DVDDIO_3 1.8
27 SWB0 CONN13 CH9 P0V75_DVDD_39 0.75
28 SWB0 CONN13 CH10 P0V75_AVDD_39 0.75 0.756
29 SWB0 CONN13 CH11 P1V5_AVDD_39 1.5 1.524
30 SWB0 CONN13 CH12 P0V9_AVDD_39 0.9 0.915
31 SWB0 CONN13 CH13 PVDD1V5_2 1.5
32 SWB0 CONN13 CH14 PVDD1V8_DUT 1.8
33 SWB0 CONN13 CH15 PVDD_MDIO 1.2
34 SWB0 CONN14 CH0 P0V75_AVDD_7 0.75 0.756
35 SWB0 CONN14 CH1 P1V5_AVDD_7 1.5 1.524
36 SWB0 CONN14 CH2 P0V9_AVDD_7 0.9 0.915
37 SWB0 CONN14 CH3 P1V8_5 1.8 1.816
38 SWB0 CONN14 CH4 P1V8_2 1.8 1.816
39 SWB0 CONN14 CH5 PVDD3_3V_SYNTH_LDO_B2 3.3 3.38
40 SWB0 CONN14 CH6 PVDD3_3V_SYNTH_LDO_A2 3.3 3.38
41 SWB0 CONN14 CH7 PVDD3_3V_SYNTH_LDO_A1 3.3 3.38
42 SWB0 CONN14 CH8 PVDD1V5_TSC 1.5 1.516
43 SWB0 CONN14 CH9 PVDD1V5_ANLG 1.5 1.516
44 SWB0 CONN14 CH10 NC -
45 SWB0 CONN14 CH11 NC -
46 SWB0 CONN14 CH12 PVDD1V5_1 1.5
47 SWB0 CONN14 CH13 NC -
48 SWB0 CONN14 CH14 P1V8_DVDDIO_1 1.8
49 SWB0 CONN14 CH15 P0V75_DVDD_7 0.75
50 SWB0 CONN15 CH0 P1V5_AVDD_55 1.5 1.524
51 SWB0 CONN15 CH1 P0V9_AVDD_55 0.9 0.915
52 SWB0 CONN15 CH2 P0V75_DVDD_63 0.75
53 SWB0 CONN15 CH3 P0V75_AVDD_63 0.75 0.756
54 SWB0 CONN15 CH4 P1V5_AVDD_63 1.5 1.524
55 SWB0 CONN15 CH5 P0V9_AVDD_63 0.9 0.915
56 SWB0 CONN15 CH6 PVDD3_3V_SYNTH_LDO_B3 3.3 3.38
57 SWB0 CONN15 CH7 PVDD1V5_3 1.5
58 SWB0 CONN15 CH8 P0V85_STBY 0.85
59 SWB0 CONN15 CH9 P1V8_STBY 1.8
60 SWB0 CONN15 CH10 NC -
61 SWB0 CONN15 CH11 P3V3_STBY 3.3
62 SWB0 CONN15 CH12 PVDD0V9_2 0.9 0.91
63 SWB0 CONN15 CH13 P0V75_DVDD_55 0.75
64 SWB0 CONN15 CH14 P0V75_AVDD_55 0.75 0.756
65 SWB0 CONN15 CH15 P1V8_DVDDIO_4 1.8
66 SWB0 CONN16 CH0 PVDD1V5_0 1.5
67 SWB0 CONN16 CH1 P1V8_4 1.8 1.816
68 SWB0 CONN16 CH2 PVDD3_3V_SYNTH_LDO_B5 3.3 3.38
69 SWB0 CONN16 CH3 PVDD3_3V_SYNTH_LDO_A5 3.3 3.38
70 SWB0 CONN16 CH4 PVDD3_3V_SYNTH_LDO_B4 3.3 3.38
71 SWB0 CONN16 CH5 PVDD3_3V_SYNTH_LDO_A4 3.3 3.38
72 SWB0 CONN16 CH6 P3V3 3.3 3.327
73 SWB0 CONN16 CH7 PVDD0_8V_T3 0.8 0.82
74 SWB0 CONN16 CH8 P0V75_DVDD_1 0.75
75 SWB0 CONN16 CH9 P0V75_AVDD_1 0.75 0.756
76 SWB0 CONN16 CH10 P1V5_AVDD_1 1.5 1.524
77 SWB0 CONN16 CH11 P0V9_AVDD_1 0.9 0.915
78 SWB0 CONN16 CH12 PVDD0V9_0 0.9 0.915
79 SWB0 CONN16 CH13 PVDD0V9_1 0.9 0.91
80 SWB0 CONN16 CH14 PVDD0V9_3 0.9 0.915
81 SWB0 CONN16 CH15 PVDD1V2_T3 1.2 1.224
82 SWB1 CONN13 CH0 P0V75_DVDD_47 0.75
83 SWB1 CONN13 CH1 P0V75_AVDD_47 0.75 0.756
84 SWB1 CONN13 CH2 P1V5_AVDD_47 1.5 1.524
85 SWB1 CONN13 CH3 P0V9_AVDD_47 0.9 0.915
86 SWB1 CONN13 CH4 P1V8_1 1.8 1.816
87 SWB1 CONN13 CH5 PVDD3_3V_SYNTH_LDO_A3 3.3 3.38
88 SWB1 CONN13 CH6 PVDD3_3V_SYNTH_LDO_B1 3.3 3.38
89 SWB1 CONN13 CH7 P1V8_3 1.8 1.816
90 SWB1 CONN13 CH8 P1V8_DVDDIO_3 1.8
91 SWB1 CONN13 CH9 P0V75_DVDD_39 0.75
92 SWB1 CONN13 CH10 P0V75_AVDD_39 0.75 0.756
93 SWB1 CONN13 CH11 P1V5_AVDD_39 1.5 1.524
94 SWB1 CONN13 CH12 P0V9_AVDD_39 0.9 0.915
95 SWB1 CONN13 CH13 PVDD1V5_2 1.5
96 SWB1 CONN13 CH14 PVDD1V8_DUT 1.8
97 SWB1 CONN13 CH15 PVDD_MDIO 1.2
98 SWB1 CONN14 CH0 P0V75_AVDD_7 0.75 0.756
99 SWB1 CONN14 CH1 P1V5_AVDD_7 1.5 1.524
100 SWB1 CONN14 CH2 P0V9_AVDD_7 0.9 0.915
101 SWB1 CONN14 CH3 P1V8_5 1.8 1.816
102 SWB1 CONN14 CH4 P1V8_2 1.8 1.816
103 SWB1 CONN14 CH5 PVDD3_3V_SYNTH_LDO_B2 3.3 3.38
104 SWB1 CONN14 CH6 PVDD3_3V_SYNTH_LDO_A2 3.3 3.38
105 SWB1 CONN14 CH7 PVDD3_3V_SYNTH_LDO_A1 3.3 3.38
106 SWB1 CONN14 CH8 PVDD1V5_TSC 1.5 1.516
107 SWB1 CONN14 CH9 PVDD1V5_ANLG 1.5 1.516
108 SWB1 CONN14 CH10 NC -
109 SWB1 CONN14 CH11 NC -
110 SWB1 CONN14 CH12 PVDD1V5_1 1.5
111 SWB1 CONN14 CH13 NC -
112 SWB1 CONN14 CH14 P1V8_DVDDIO_1 1.8
113 SWB1 CONN14 CH15 P0V75_DVDD_7 0.75
114 SWB1 CONN15 CH0 P1V5_AVDD_55 1.5 1.524
115 SWB1 CONN15 CH1 P0V9_AVDD_55 0.9 0.915
116 SWB1 CONN15 CH2 P0V75_DVDD_63 0.75
117 SWB1 CONN15 CH3 P0V75_AVDD_63 0.75 0.756
118 SWB1 CONN15 CH4 P1V5_AVDD_63 1.5 1.524
119 SWB1 CONN15 CH5 P0V9_AVDD_63 0.9 0.915
120 SWB1 CONN15 CH6 PVDD3_3V_SYNTH_LDO_B3 3.3 3.38
121 SWB1 CONN15 CH7 PVDD1V5_3 1.5
122 SWB1 CONN15 CH8 P0V85_STBY 0.85
123 SWB1 CONN15 CH9 P1V8_STBY 1.8
124 SWB1 CONN15 CH10 NC -
125 SWB1 CONN15 CH11 P3V3_STBY 3.3
126 SWB1 CONN15 CH12 PVDD0V9_2 0.9 0.91
127 SWB1 CONN15 CH13 P0V75_DVDD_55 0.75
128 SWB1 CONN15 CH14 P0V75_AVDD_55 0.75 0.756
129 SWB1 CONN15 CH15 P1V8_DVDDIO_4 1.8
130 SWB1 CONN16 CH0 PVDD1V5_0 1.5
131 SWB1 CONN16 CH1 P1V8_4 1.8 1.816
132 SWB1 CONN16 CH2 PVDD3_3V_SYNTH_LDO_B5 3.3 3.38
133 SWB1 CONN16 CH3 PVDD3_3V_SYNTH_LDO_A5 3.3 3.38
134 SWB1 CONN16 CH4 PVDD3_3V_SYNTH_LDO_B4 3.3 3.38
135 SWB1 CONN16 CH5 PVDD3_3V_SYNTH_LDO_A4 3.3 3.38
136 SWB1 CONN16 CH6 P3V3 3.3 3.327
137 SWB1 CONN16 CH7 PVDD0_8V_T3 0.8 0.82
138 SWB1 CONN16 CH8 P0V75_DVDD_1 0.75
139 SWB1 CONN16 CH9 P0V75_AVDD_1 0.75 0.756
140 SWB1 CONN16 CH10 P1V5_AVDD_1 1.5 1.524
141 SWB1 CONN16 CH11 P0V9_AVDD_1 0.9 0.915
142 SWB1 CONN16 CH12 PVDD0V9_0 0.9 0.915
143 SWB1 CONN16 CH13 PVDD0V9_1 0.9 0.91
144 SWB1 CONN16 CH14 PVDD0V9_3 0.9 0.915
145 SWB1 CONN16 CH15 PVDD1V2_T3 1.2 1.224
docs/release-notes/v1.1.3.md
+59
View File
@@ -0,0 +1,59 @@
# v1.1.3 — Margin now measures against what this platform actually runs at
## ✨ New features
**Per-CONN margin profiles for the switch boards**
* `combo_SWB_CONN13_high` / `_low` through `combo_SWB_CONN16_high` / `_low` replace the old `comboA` / `comboB` pair. Each file's per-channel percentages follow the rails on *that* board, so a CONN13 profile is no longer a rough fit for CONN16.
* SWB0 and SWB1 share a profile per CONN — the two boards carry identical rails and differ only by I2C bus.
* A high pass and a low pass are now the same run with `_high` swapped for `_low`.
* **A profile applied to the wrong CONN margins the wrong rails and says nothing.** The percentages are positional, so nothing detects the mismatch. `margin_apply_profile_all.sh` now names the right profile per board instead of one name for all nine.
## 🐛 Bug fixes
**`VNOM` was the spec value, not what the rails actually sit at**
* 86 of the 144 channels moved up between +0.8% and +2.5% to the measured median for this platform — `PVDD3_3V_SYNTH_LDO_*` 3.3 → 3.38, `P0V9_AVDD_*` 0.9 → 0.915, `PVDD0_8V_T3` 0.8 → 0.82, and so on.
* **This is not a display change.** `VNOM` is the denominator of `margin_status`'s deviation %, *and* the basis `margin_set` derives high / low / OV / UV from. A rail sitting steady at 0.756 V used to read `+0.80%` against a nominal 0.75 and now reads `0.00%`; and asking for `+3%` now lands on a different absolute voltage than it did last week.
* **Margin logs from before and after this build cannot be compared directly.** The numbers moved because the reference moved, not because the hardware did.
**The batch profile script pointed at files that no longer exist**
* `margin_apply_profile_all.sh` still named `comboA` for all nine boards. With `comboA.conf` removed, every board would have stopped at `Profile not found` — a nine-line wall of errors on a script that is normally left to run.
**The channel map CSV was stale**
* `docs/LTC2980_channel_map.csv` is generated from `settings/*.conf`, so all 86 changed rails were wrong in it. Regenerated with `tools/gen_channel_map.sh`. It is output, not source — regenerate it, never hand-edit it.
## 📦 Downloads
| File | Contents |
|---|---|
| `Script_ABC_Blanton_V1.1.3.zip` | The full Tera Term working directory, including `Blanton_Script/` to copy onto the DUT |
**After copying to the DUT:**
```bash
chmod +x ~/Blanton_Script/*.sh # see below
grep -rlU $'\r' ~/Blanton_Script # expect no output
```
`blanton_ber.sh` and `nfc_polling.sh` are invoked by the macros through `./` or `~/`, so they need the execute bit along with `bmc_monitor.sh` and `usb_target.sh` — neither git nor a Windows/USB copy carries it reliably.
## ⚠️ Before you run
* **Re-baseline your margin expectations.** Any pass/fail limits or golden logs derived from the old `VNOM` values need redoing against this build.
* **`margin_save` in any form writes NVM permanently** and now writes margin windows derived from the new reference. Run `margin_status_all.sh` first and never call it during a test.
* **SWB profiles are per-CONN.** Applying `combo_SWB_CONN13_high` to a CONN16 board is silently wrong.
* **These three tests cannot share the switch**: `blanton_ber.sh`, `blanton_tr518.sh` and `blanton_traffic_linespeed`.
* **PRBS takes the links down** while `blanton_ber.sh` is armed.
* **`ce0` keeps running until you stop it.**
* **Two numbers must stay in step**: Script C's `sleep 30` and `blanton_ber.sh`'s `BER_INTERVAL`.
* **`FAN_SPEED` is 100** — the fans run flat out unless you change `config.ttl`.
* **`nfc_polling.sh start` clears the log**, so Script B wipes Script A's NFC baseline file (the numbers are already in the console log).
* **The NFC tool is written for the customer's tag.** It polls Type A / B / F only and parses Type A strictly; a tag of another technology is never discovered and fails as `no RF interface activation notification received`. Without `--expected-id` it does not check identity, so a different tag of the same type still passes.
* **The three items listed as unverified in v1.1.0 are still unverified**: the `ce0` ingress mirror, the 120s settle in `blanton_tr518.sh`, and `test mode nr=no` on stop.
## 🔗 Links
* [ARCHITECTURE.md](https://etgit.et-wen.com/etwen/Blanton_TTL_Script/src/branch/main/ARCHITECTURE.md) — test flow, data models, constraints
* [CLAUDE.md](https://etgit.et-wen.com/etwen/Blanton_TTL_Script/src/branch/main/CLAUDE.md) — commands and the bench gotchas
* [LTC2980_channel_map.csv](https://etgit.et-wen.com/etwen/Blanton_TTL_Script/src/branch/main/docs/LTC2980_channel_map.csv) — all 144 margin channels with the new `VNOM`
**Full changelog:** [V1.1.2...V1.1.3](https://etgit.et-wen.com/etwen/Blanton_TTL_Script/compare/V1.1.2...V1.1.3)
docs/release-notes/v1.1.4.md
+61
View File
@@ -0,0 +1,61 @@
# v1.1.4 — A thermal and safety run that loads the box and watches the rails
## ✨ New features
**`4_Blanton_Script_thermal_safety.ttl`**
* A **standalone** script — it is not part of the A → B → C chain and is not started by any of them. Run it on its own when the question is thermal or safety rather than functional.
* Brings the DUT up the same way Script A does (login, session reset, fan speed, `wait_init`, DUT inventory, BMC, PCIe error clear, `pcie_bus`, PMON, dmesg), then loads it: `mlucas-avx2 -cpu 0:15` in the background and `blanton_tr518.sh start` on the data plane.
* Then loops every minute: platform data, **both switch boards' rail power** via `TH6_SWB0/1_power_readback.sh`, and `bgctl list` / `jobs`. That is the point of the script — power per rail under sustained full load, sampled over hours.
* **It has no teardown.** When you interrupt it the DUT is still in `port cd lb=mac`, `l2 learn off` and `test mode nr=yes`, and `mlucas-avx2` is still running. Run `blanton_tr518.sh stop` and `kill $(jobs -p)` before anything else uses the box — nothing in `show interfaces status` reveals the leftover state.
* **It cannot share a DUT with Script B.** Both take over the `cd` ports.
**Test flow diagram**
* `docs/Blanton_Test_Flow.drawio` draws all four scripts side by side, with the config flags that change each step marked, the one real `goto` in Script B drawn, and the manual handoffs between A → B → C shown as such.
## 🐛 Bug fixes
**The soak loop spent most of its minute reading margin**
* Script B's per-round loop is meant to be a quick sample. `margin_status_all.sh` walks nine LTC2980s over I2C and dominated the round. The scan moved to Script C, which takes it once before `show uptime`.
* **The trade-off is real and worth knowing**: margin is now only measured at the start (Script A) and the end (Script C). Drift that happens *during* the soak is no longer visible.
**`hw-test-session finish` ran from inside the session's own shell**
* Script C now sends `exit` and waits for `Script done` first, so `finish` runs in the login shell that opened the session.
**The new script arrived with LF line endings**
* Every other `.ttl` in the repo is CRLF, and `.gitattributes` marks `*.ttl` as `-text` — whatever is committed is exactly what Tera Term gets. Converted to CRLF to match.
## 📦 Downloads
| File | Contents |
|---|---|
| `Script_ABC_Blanton_V1.1.4.zip` | The full Tera Term working directory, including `Blanton_Script/` to copy onto the DUT |
**After copying to the DUT:**
```bash
chmod +x ~/Blanton_Script/*.sh # see below
grep -rlU $'\r' ~/Blanton_Script # expect no output
```
`blanton_ber.sh`, `nfc_polling.sh`, `blanton_tr518.sh` and the two `TH6_SWB*_power_readback.sh` are invoked through `./` or `~/`, so they need the execute bit along with `bmc_monitor.sh` and `usb_target.sh` — neither git nor a Windows/USB copy carries it reliably.
## ⚠️ Before you run
* **Script 4 leaves the switch loaded and looped back.** Always finish with `blanton_tr518.sh stop`. If the next test starts without it, traffic and BER results are meaningless and nothing warns you.
* **Do not run Script 4 and Script B on the same DUT.** Same ports, same L2 settings.
* **Margin is no longer sampled during the soak** — only Script A (start) and Script C (end).
* **Re-baseline your margin limits if you have not already**: `VNOM` became the measured median in v1.1.3, which moved both the deviation % and the margin window.
* **These three cannot share the switch**: `blanton_ber.sh`, `blanton_tr518.sh`, `blanton_traffic_linespeed`.
* **PRBS takes the links down** while `blanton_ber.sh` is armed.
* **`ce0` keeps circulating until you stop it.**
* **Two numbers must stay in step**: Script C's `sleep 30` and `blanton_ber.sh`'s `BER_INTERVAL`.
* **`FAN_SPEED` is 100** — relevant here more than anywhere: a thermal run at full fan is not the same test as one at 30%.
* **The three items listed as unverified in v1.1.0 are still unverified**: the `ce0` ingress mirror, the 120s settle in `blanton_tr518.sh`, and `test mode nr=no` on stop. The settle matters most for this release — Script 4 depends on `tr 518` still driving traffic minutes after it was started.
## 🔗 Links
* [Blanton_Test_Flow.drawio](https://etgit.et-wen.com/etwen/Blanton_TTL_Script/src/branch/main/docs/Blanton_Test_Flow.drawio) — the four scripts side by side
* [ARCHITECTURE.md](https://etgit.et-wen.com/etwen/Blanton_TTL_Script/src/branch/main/ARCHITECTURE.md) — test flow, data models, constraints
* [CLAUDE.md](https://etgit.et-wen.com/etwen/Blanton_TTL_Script/src/branch/main/CLAUDE.md) — commands and the bench gotchas
**Full changelog:** [V1.1.3...V1.1.4](https://etgit.et-wen.com/etwen/Blanton_TTL_Script/compare/V1.1.3...V1.1.4)
docs/release-notes/v1.1.5.md
+67
View File
@@ -0,0 +1,67 @@
# v1.1.5 — The stress jobs now last the whole soak
## 🐛 Bug fixes
**USB stress ran for sixty seconds of an overnight soak**
* `qfx5252-stress-usb` was started with `--runtime 60`. It finished a minute in and the USB path sat idle for the rest of the night. Nothing failed, nothing said so, and the run looked complete.
* SSD stress had the same shape at `--runtime 3600` — one hour of a soak that usually runs far longer.
* Both are now `--runtime 86400`, and the BMC DDR memtester lost its loop count (`64M 1` → `64M`) so it runs until it is stopped rather than finishing one pass.
* **86400 is 24 hours, not "forever".** A soak longer than a day leaves SSD and USB dead for the remainder. Script B prints `bgctl list` every round (since v1.0.10), so the shorter list is visible there — but nothing raises an alarm.
## ✨ New features
**Multiphase VRM margin**
* New `blanton_multiphase_margin.sh` drives the multiphase controllers on both switch boards over the native i2c buses — SWB0 on `/dev/i2c-13` and `-15`, SWB1 on `-14` and `-16`. 19 rails per board, 38 in all.
* `high3` / `low3` / `comboA` / `comboB` set the voltages and report one line per rail:
```
SWB0_0V9_ANLG0 - 0.930V Configure Done
SWB0_0V75_ANLG0 - 0.775V Configure Done
...
[ OK ] high3: 38 rail(s) configured
```
* `save` commits them. It has no per-rail mapping, so it reports as one operation: `Multiphase Save All`.
* `-u 0` / `-u 1` for a single board; rails belonging to the other board are skipped and counted separately, not failed.
* **`save` writes NVM permanently** (PMBus `STORE_USER_ALL`, and `0x17` on the TH6 core rail). A power cycle does not undo it.
* **These are not the LTC2980s that `margin.sh` drives.** The two tools reach the same rails from different sides and each assumes it is the only writer. There is no interlock — do not run both.
**Traffic bursts carry a random pattern**
* `blanton_traffic_linespeed` v0.7.0 appends `PatternRandom=yes` to every `tx`, `ce0` included. A fixed pattern can sit on a benign bit sequence for an entire run; a changing one is what makes a weak lane show itself.
* `-r no` forces the fixed pattern; `-r ""` leaves the argument off entirely, which is the pre-v0.7.0 wire format if a future SDK rejects it.
* Defaults change from `tx 100 length=512` to `tx 200 length=324`.
* **Counter totals are not comparable across this build**: 64800 bytes per burst instead of 51200, about 27% more. The PASS/FAIL cross-check compares a pair against each other and is unaffected — only absolute figures moved.
## 📦 Downloads
| File | Contents |
|---|---|
| `Script_ABC_Blanton_V1.1.5.zip` | The full Tera Term working directory, including `Blanton_Script/` to copy onto the DUT |
**After copying to the DUT:**
```bash
chmod +x ~/Blanton_Script/*.sh # see below
grep -rlU $'\r' ~/Blanton_Script # expect no output
```
`blanton_ber.sh`, `nfc_polling.sh`, `blanton_tr518.sh`, `blanton_multiphase_margin.sh` and the two `TH6_SWB*_power_readback.sh` are invoked through `./` or `~/`, so they need the execute bit along with `bmc_monitor.sh` and `usb_target.sh` — neither git nor a Windows/USB copy carries it reliably.
## ⚠️ Before you run
* **A soak longer than 24 hours needs the runtimes raised.** `--runtime 86400` is a ceiling; past it, SSD and USB are idle and only a shorter `bgctl list` hints at it.
* **`blanton_multiphase_margin.sh save` is permanent.** Read the rails back before committing, and never run it during a test.
* **Do not mix `blanton_multiphase_margin.sh` and `margin.sh`** — same rails, two different access paths, no interlock.
* **Traffic counters changed scale.** Any absolute thresholds taken from earlier logs need redoing.
* **Script 4 (thermal/safety) has no teardown** — finish with `blanton_tr518.sh stop` and `kill $(jobs -p)`.
* **These three cannot share the switch**: `blanton_ber.sh`, `blanton_tr518.sh`, `blanton_traffic_linespeed`.
* **Margin is only sampled at the start and end of a soak** (since v1.1.4), not during it.
* **`FAN_SPEED` is 100** — the fans run flat out unless you change `config.ttl`.
* **The three items listed as unverified in v1.1.0 are still unverified**: the `ce0` ingress mirror, the 120s settle in `blanton_tr518.sh`, and `test mode nr=no` on stop.
## 🔗 Links
* [Blanton_Test_Flow.drawio](https://etgit.et-wen.com/etwen/Blanton_TTL_Script/src/branch/main/docs/Blanton_Test_Flow.drawio) — the four scripts side by side
* [ARCHITECTURE.md](https://etgit.et-wen.com/etwen/Blanton_TTL_Script/src/branch/main/ARCHITECTURE.md) — test flow, data models, constraints
* [CLAUDE.md](https://etgit.et-wen.com/etwen/Blanton_TTL_Script/src/branch/main/CLAUDE.md) — commands and the bench gotchas
**Full changelog:** [V1.1.4...V1.1.5](https://etgit.et-wen.com/etwen/Blanton_TTL_Script/compare/V1.1.4...V1.1.5)
docs/release-notes/v1.1.6.md
+74
View File
@@ -0,0 +1,74 @@
# v1.1.6 — The PDB bricks were never being asked the right question
## 🐛 Bug fixes
**Every PDB reading was `NA`, and the cause was a page number written in the wrong base**
* The four ADPM12200 bricks put each measurement on its own PMBus PAGE, and the page has to be written before every read. The bring-up spreadsheet listed those page numbers in decimal but with an `0x` prefix, so four of the five selected the wrong page:
| Reading | Datasheet PAGE | Should send | Spreadsheet said |
|---|---|---|---|
| Vin | 9 | `0x09` | `0x00` |
| Iin | 10 | `0x0A` | `0x10` |
| Vout | 2 | `0x02` | `0x02` ✅ |
| Iout | 14 | `0x0E` | `0x14` |
| Temp | 18 | `0x12` | `0x18` |
* Only Vout worked — because 2 reads the same in either base. That is why Iin and Iout answered `0xFFFF` and the temperature answered `0x0000`, and why a Vin scaling had to be invented to make 50 V appear.
* `blanton_pwr_data.sh` sends no page at all (its PDB table has `page "-"`), which is the reason it reports the whole PDB section as `NA`.
## ✨ New features
**`pwr_brick.sh` — the five power bricks, read properly**
* `show` prints Vin / Iin / Vout / Iout / Temp for all five: `SWB0.PU207` (0x62), `SWB0.PU13` (0x63), `SWB1.PU332` (0x60), `SWB1.PU85` (0x61) and `CPB.PU37` (0x26). `-r` adds the raw words.
* Conversions come from the datasheet's DIRECT equation, `X = (1/m)(Y × 10⁻ᴿ − b)`, with Table 3's coefficients: voltage `Y × 8 mV`, current `Y × 0.04 A`, temperature `Y × 0.01 °C`.
* **Cross-checked, not assumed**: `READ_VOUT` returns `0x05D4` → 1492 × 8 = 11936 mV, which is exactly the figure `show platform voltage` reports for that rail from a completely separate sensor path.
* `CPB.PU37` is a different part — no page writes and its own scaling — and is handled separately.
* The datasheet is now in the repo (`docs/ADPM12200CMLZxx_DS_*.pdf`) so the pages and coefficients can be checked without hunting for it.
**Every value is validated before it is printed**
* This bus corrupts the **high byte only**. That turns `11.98 V` into `32.00 V` — positive, plausible in magnitude, and invisible to any "reject 0xFFFF" filter. Each value is re-read (up to `PB_TRIES`, default 8) until it is not `0xFFFF`, not `0x0000`, and lands inside a plausibility window.
* `0x0000` is rejected as a raw word for the same reason: on the temperature register it decodes to a perfectly believable 0 °C.
**Complementary margin profiles per board**
* `comboA` / `comboB` for CB and each SWB CONN. `comboB` is `comboA` with every direction flipped, so running both covers each rail high and low while its neighbours sit the other way.
* NC channels stay at `nominal` in both — there is nothing to margin on an unused rail (CONN14 CH10/11/13, CONN15 CH10).
**The BMC USB service log is captured again — to a file**
* Script C's `journalctl` dump had been commented out, so that service log reached nothing at all. It now runs with `-o short-iso` into `log/bmc_usb_net.log` and is copied into the job directory for the USB archive. The ISO timestamps line up with the other monitor logs, and `rm -f` first keeps the file to one run.
* **It is no longer printed to the console**, so the USB copy is the only copy. If that `cp` fails — and nothing checks it — the service log is gone. Check the job directory before packing up.
## 📦 Downloads
| File | Contents |
|---|---|
| `Script_ABC_Blanton_V1.1.6.zip` | The full Tera Term working directory, including `Blanton_Script/` to copy onto the DUT |
**After copying to the DUT:**
```bash
chmod +x ~/Blanton_Script/*.sh # see below
grep -rlU $'\r' ~/Blanton_Script # expect no output
```
`blanton_ber.sh`, `nfc_polling.sh`, `blanton_tr518.sh`, `blanton_multiphase_margin.sh`, `pwr_brick.sh` and the two `TH6_SWB*_power_readback.sh` are invoked through `./` or `~/`, so they need the execute bit along with `bmc_monitor.sh` and `usb_target.sh` — neither git nor a Windows/USB copy carries it reliably.
## ⚠️ Before you run
* **`READ_VIN` and `READ_IIN` are not in the datasheet's coefficient table.** They are decoded here with the voltage and current coefficients — consistent with a ~50 V input, but not stated by the datasheet. Anything quoting brick Vin should have that confirmed first. `PB_VIN_M` / `PB_IIN_M` are where to change it.
* **The BMC USB service log only exists on the USB stick.** It is not in the master console log any more.
* **`NA` has two meanings**: nothing readable, or read but outside its plausibility window. Use `PB_TRIES=1 ./Blanton_Script/pwr_brick.sh show -r` to see the unretried raw words and tell them apart.
* **Margin profiles are positional.** `comboA_SWB_CONN13` applied to a CONN16 board margins the wrong rails and nothing detects it.
* **`blanton_multiphase_margin.sh save` is permanent**, and it must not be mixed with `margin.sh` — same rails, two access paths, no interlock.
* **A soak longer than 24 hours needs the stress runtimes raised** — `--runtime 86400` is a ceiling.
* **Script 4 (thermal/safety) has no teardown** — finish with `blanton_tr518.sh stop` and `kill $(jobs -p)`.
* **These three cannot share the switch**: `blanton_ber.sh`, `blanton_tr518.sh`, `blanton_traffic_linespeed`.
* **`FAN_SPEED` is 100.**
* **The three items listed as unverified in v1.1.0 are still unverified**: the `ce0` ingress mirror, the 120s settle in `blanton_tr518.sh`, and `test mode nr=no` on stop.
## 🔗 Links
* [ARCHITECTURE.md](https://etgit.et-wen.com/etwen/Blanton_TTL_Script/src/branch/main/ARCHITECTURE.md) — test flow, data models, constraints
* [CLAUDE.md](https://etgit.et-wen.com/etwen/Blanton_TTL_Script/src/branch/main/CLAUDE.md) — commands and the bench gotchas
* [Blanton_Test_Flow.drawio](https://etgit.et-wen.com/etwen/Blanton_TTL_Script/src/branch/main/docs/Blanton_Test_Flow.drawio) — the four scripts side by side
**Full changelog:** [V1.1.5...V1.1.6](https://etgit.et-wen.com/etwen/Blanton_TTL_Script/compare/V1.1.5...V1.1.6)
docs/release-notes/v1.1.7.md
+73
View File
@@ -0,0 +1,73 @@
# v1.1.7 — A way back from a margin, and a reboot cycle that runs itself
## ✨ New features
**`blanton_multiphase_margin.sh normal` — put the rails back without a power cycle**
* `normal` returns all 38 multiphase rails to their nominal set point, with the same per-rail reporting as the margin profiles (`SWB0_0V9_ANLG0 - 0.930V Configure Done`). `-u 0|1|all` as usual.
* Until now the only way out of a margin was to power-cycle the DUT. That mattered more than it sounds: `save` run while the board was still margined would have written the offsets into NVM, where a power cycle does not help either.
* The commands it sends are in `tools/Multiphase_Normal.txt` for anyone driving the bench by hand.
> ⚠️ `TH6_CORE` is 0.8 V nominal but settles near **0.8591 V** once the load line is active. Reading back 0.859 after `normal` is the load line doing its job, not a failed write.
**`5_Blanton_Script_Reboot_Cycle.ttl` — an unattended reboot-cycle run**
* A standalone macro, like Script 4: it does **not** chain to A → B → C and does not use `hw-test-session`. Every cycle is a fresh boot, so there is nothing to carry over and nothing to tear down.
* Each round: login → `sudo -i` → `date -s` → fan speed → `wait_init` → **Check Pt1 … Pt13** → `show uptime` → `reboot` → wait for the next boot. The cycle number is printed in the banner of every round.
| | | | |
|---|---|---|---|
| **Pt1** DUT info | **Pt2** BMC info + tools | **Pt3** mgmt ping | **Pt4** NFC poll |
| **Pt5** SSD stress | **Pt6** USB stress | **Pt7** BMC USB net | **Pt8** port status + 15 s traffic |
| **Pt9** BER sweep | **Pt10** NVMe errors | **Pt11** platform data | **Pt12** dmesg i2c |
| **Pt13** PCIe error counters | | | |
* The USB step takes its device node from `usb_target.sh`, not a hard-coded `/dev/sda1`.
**The SSD and USB stress durations are declared in `config.ttl`**
* `SSD_RUNTIME` / `SSD_COUNT` and `USB_RUNTIME` / `USB_COUNT` replace the values that were hard-coded in Script B, so a site changes them in one place. `COUNT` is passed straight through as `--passes`.
## 🐛 Bug fixes
**Script B left the global `timeout` at 15 s for the rest of the cdc_ncm section**
* The NCM probe sets `timeout = 15` and restored it only at `:skip_ping` — which the *success* path reaches several `wait`s later. Until then every `wait` gave up after 15 s instead of blocking, and a `wait` that returns without eating the prompt puts the whole macro a beat ahead of the DUT. It is now restored on the success path too.
**`goto skip_ping` in the reboot-cycle macro had no label to jump to**
* The probe was copied out of Script B without its `:skip_ping` label. Tera Term does not check labels when it loads a macro — it raises the error only when it actually jumps, which here means only when the NCM interface is missing. The failure mode was an error dialog stopping the whole cycle, on the one run where something was already wrong. The label is there now, and the `timeout` is restored **before** the branch so one line covers both paths.
**Two check points both numbered 12**
* `Dmesg_i2c` and `PCIE Error Counters` both announced themselves as `Check Pt12`. The second is now `Pt13`; Pt1 … Pt13 are unique.
## 📦 Downloads
| File | Contents |
|---|---|
| `Script_ABC_Blanton_V1.1.7.zip` | The full Tera Term working directory, including `Blanton_Script/` to copy onto the DUT |
**After copying to the DUT:**
```bash
chmod +x ~/Blanton_Script/*.sh # see below
grep -rlU $'\r' ~/Blanton_Script # expect no output
```
`blanton_ber.sh`, `nfc_polling.sh`, `blanton_tr518.sh`, `blanton_multiphase_margin.sh`, `pwr_brick.sh` and the two `TH6_SWB*_power_readback.sh` are invoked through `./` or `~/`, so they need the execute bit along with `bmc_monitor.sh` and `usb_target.sh` — neither git nor a Windows/USB copy carries it reliably.
## ⚠️ Before you run
* **`--runtime` is the job's overall limit, not a per-pass one.** `qfx5252-stress-*` stops after `RUNTIME` seconds whatever `--passes` says, so `SSD_RUNTIME=600` is a **10 minute** stress, not 600 × `SSD_COUNT`. For a 24 hour soak set `RUNTIME` to `86400`. The shipped defaults are 600.
* **Script 5 has not been run on hardware yet.** Two things to confirm on the bench: that `wait "Booting in blind mode"` really appears in this build's boot output — it has no `timeout` guard, so a changed string waits forever — and that re-running `bmc-first-enroll` every cycle is safe.
* **Script 5 has no exit condition.** `while 1` with a `reboot` at the end of each round; stop it by closing the Tera Term macro.
* **`blanton_multiphase_margin.sh save` is permanent**, and must not be mixed with `margin.sh` — same rails, two access paths, no interlock. Never run it while the board is margined.
* **`READ_VIN` and `READ_IIN` are still not in the ADPM12200 coefficient table** — `pwr_brick.sh` decodes them with the voltage and current coefficients. Confirm before quoting brick Vin.
* **The BMC USB service log only exists on the USB stick.**
* **Script 4 (thermal/safety) has no teardown** — finish with `blanton_tr518.sh stop` and `kill $(jobs -p)`.
* **These three cannot share the switch**: `blanton_ber.sh`, `blanton_tr518.sh`, `blanton_traffic_linespeed`.
* **`FAN_SPEED` is 100.**
* **Still unverified from v1.1.0**: the `ce0` ingress mirror, the 120 s settle in `blanton_tr518.sh`, and `test mode nr=no` on stop.
## 🔗 Links
* [ARCHITECTURE.md](https://etgit.et-wen.com/etwen/Blanton_TTL_Script/src/branch/main/ARCHITECTURE.md) — test flow, data models, constraints
* [CLAUDE.md](https://etgit.et-wen.com/etwen/Blanton_TTL_Script/src/branch/main/CLAUDE.md) — commands and the bench gotchas
* [Blanton_Test_Flow.drawio](https://etgit.et-wen.com/etwen/Blanton_TTL_Script/src/branch/main/docs/Blanton_Test_Flow.drawio) — the scripts side by side
**Full changelog:** [V1.1.6...V1.1.7](https://etgit.et-wen.com/etwen/Blanton_TTL_Script/compare/V1.1.6...V1.1.7)
docs/release-notes/v1.1.8.md
+71
View File
@@ -0,0 +1,71 @@
# v1.1.8 — The CPU stress no longer dies with your terminal
## ✨ New features
**`mlucas` now runs as a systemd unit, so it survives a lost session**
* The AMD CPU load is started as `systemd-run --unit=mlucas-amm --property=Type=exec --property=Restart=always --property=RestartSec=2`, instead of being backgrounded with `&` in the login shell. Script B and the thermal/safety macro (Script 4) both use it.
* As a shell job it belonged to that one terminal: close Tera Term, drop the console, reconnect on a different session, and the load was gone — while `jobs` from the new session showed nothing to tell you. A multi-day soak could spend most of its length with an idle CPU and produce thermal numbers that looked fine because nothing was loading the part.
* `Restart=always` brings it back if it exits on its own, and the log is appended (`>>`) inside the unit while being truncated (`>`) once before the unit starts, so a restart adds to the run rather than erasing it.
* Script B now prints `systemctl is-active mlucas-amm` beside `jobs`, both in the one-shot check and in every pass of the monitor loop. One word — `active` — tells you the CPU is still loaded.
> The old `&` line is kept commented out directly above the new one, to fall back to if `systemd-run` is not available on a build.
**Script C stops the unit and brings its log home**
* `systemctl stop mlucas-amm` was added next to the existing `kill $(jobs -p)`, and `mlucas_amm_log` is copied into `/host/hw-eval/jobs/` with the other stress logs.
* `kill $(jobs -p)` cannot reach a systemd unit, so without this the load would have run straight through the post-test snapshot and into the next test — every temperature and power reading taken at full load, with nothing in `show interfaces status` to reveal it.
**`EN_timestamp` — turn the per-line log timestamp on or off from `config.ttl`**
* Script A's `logopen` takes its 5th argument from the new flag: `logopen filename 0 1 1 EN_timestamp`. The argument order (`<file> <binary> <append> <PlainText> <timestamp>`) is now spelled out above the call.
**`BMC_USB_RUNTIME` — the BMC USB ping duration is a knob, not a constant**
* It was hard-coded to `-w 14400` (4 hours), which no longer matched the soak lengths the SSD and USB knobs were being set to. The shipped default is `172800` (2 days).
**The shipped stress defaults are now one hour**
* `SSD_RUNTIME` and `USB_RUNTIME` go from 600 to `3600`. v1.1.7 shipped a 10 minute stress by default.
## 🐛 Bug fixes
**`publish.sh` produced a different bundle depending on whose machine it ran on**
* `rsync` copied whatever sat in `src/Script_ABC_Blanton/`, so a developer with the `hammer/` mlucas binaries in their working tree shipped a ~100 MB zip while a fresh clone shipped ~200 KB. `hammer/` is now excluded from the bundle and ignored by git.
* `publish.sh -h` also printed the first lines of code along with the usage text, and would have truncated the usage block as the header grew. It now reads the header up to the first line of code.
## 📦 Downloads
| File | Contents |
|---|---|
| `Script_ABC_Blanton_V1.1.8.zip` | The full Tera Term working directory, including `Blanton_Script/` to copy onto the DUT |
**After copying to the DUT:**
```bash
chmod +x ~/Blanton_Script/*.sh # see below
grep -rlU $'\r' ~/Blanton_Script # expect no output
ls ~/hammer/tools/amd/mlucas-avx2 # must already be there - see below
```
`blanton_ber.sh`, `nfc_polling.sh`, `blanton_tr518.sh`, `blanton_multiphase_margin.sh`, `pwr_brick.sh` and the two `TH6_SWB*_power_readback.sh` are invoked through `./` or `~/`, so they need the execute bit along with `bmc_monitor.sh` and `usb_target.sh` — neither git nor a Windows/USB copy carries it reliably.
## ⚠️ Before you run
* **Replace `config.ttl` along with the macros.** `EN_timestamp` and `BMC_USB_RUNTIME` are new, and Tera Term aborts the macro on an undefined variable rather than treating it as 0 — keeping an old `config.ttl` stops Script A at the `logopen` line.
* **`hammer/` is not in the bundle.** The ~99 MB of mlucas binaries comes with the DUT image, not from this repo. If `~/hammer/tools/amd/mlucas-avx2` is missing, Script B does not stop — it starts a unit that fails and is restarted every 2 seconds. Check for the file before you start.
* **The timestamp format is not in the macro.** `EN_timestamp` only decides whether there is one; the format lives in Tera Term's Setup → Additional settings → Log, stored in that PC's `TERATERM.INI`. Two benches running the same macro can produce differently stamped logs.
* **The three stress durations are deliberately different**: SSD and USB at 1 hour, the BMC USB ping at 2 days. Set each to match the soak you are actually running.
* **`--runtime` is the job's overall limit, not a per-pass one.** `qfx5252-stress-*` stops after `RUNTIME` seconds whatever `--passes` says. For a 24 hour soak set `RUNTIME` to `86400`.
* **`mlucas-amm` has not been run on hardware yet.** The unit resolves `~` through bash's fallback to the passwd entry, because systemd does not set `HOME` for a system service without `User=`. It should land on `/root/hammer`, the same path the interactive shell uses — confirm it on the bench, or change both paths to an absolute `/root/hammer/...`.
* **Script 4 uses the same unit but has no teardown.** The thermal/safety macro now starts `mlucas-amm` the same way Script B does, and it still ends at `while 1` — so stopping it means `blanton_tr518.sh stop` **and** `systemctl stop mlucas-amm`. Closing Tera Term does not stop the CPU load any more.
* **Script 5 (reboot cycle) is still unverified on hardware**, still has no exit condition, and `wait "Booting in blind mode"` still has no `timeout` guard.
* **`blanton_multiphase_margin.sh save` is permanent**, and must not be mixed with `margin.sh` — same rails, two access paths, no interlock.
* **`READ_VIN` and `READ_IIN` are still not in the ADPM12200 coefficient table.**
* **The BMC USB service log only exists on the USB stick.**
* **These three cannot share the switch**: `blanton_ber.sh`, `blanton_tr518.sh`, `blanton_traffic_linespeed`.
* **`FAN_SPEED` is 100.**
* **Still unverified from v1.1.0**: the `ce0` ingress mirror, the 120 s settle in `blanton_tr518.sh`, and `test mode nr=no` on stop.
## 🔗 Links
* [ARCHITECTURE.md](https://etgit.et-wen.com/etwen/Blanton_TTL_Script/src/branch/main/ARCHITECTURE.md) — test flow, data models, constraints
* [CLAUDE.md](https://etgit.et-wen.com/etwen/Blanton_TTL_Script/src/branch/main/CLAUDE.md) — commands and the bench gotchas
* [Blanton_Test_Flow.drawio](https://etgit.et-wen.com/etwen/Blanton_TTL_Script/src/branch/main/docs/Blanton_Test_Flow.drawio) — the scripts side by side
**Full changelog:** [V1.1.7...V1.1.8](https://etgit.et-wen.com/etwen/Blanton_TTL_Script/compare/V1.1.7...V1.1.8)
publish/publish.sh
+14 -2
View File
@@ -7,6 +7,9 @@
# publish/Script_ABC_Blanton_<Version>, taking <Version>
# from the "; Version : Vx.y.z" header of
# 1_Blanton_Script_A.ttl.
# V1.0.1 2026-09-06 Exclude hammer/ (the mlucas binaries) from the bundle,
# so the output no longer depends on whether the developer
# has them in their working tree.
# =============================================================================
#
# The version is READ FROM Script A rather than passed in, so the folder name
@@ -33,7 +36,9 @@ info() { printf '[\033[34mINFO\033[0m] %s\n' "$*"; }
ok() { printf '[\033[32m OK \033[0m] %s\n' "$*"; }
die() { printf '[\033[31mERR \033[0m] %s\n' "$*" >&2; exit 1; }
usage() { sed -n '2,26p' "${BASH_SOURCE[0]}" | sed 's/^# \{0,1\}//'; exit 0; }
# Print the header block above, up to (but not including) the first line of
# code, so adding a Version History entry never truncates the usage text.
usage() { sed -n '2,/^set -u/p' "${BASH_SOURCE[0]}" | sed '$d' | sed 's/^# \{0,1\}//'; exit 0; }
while [ $# -gt 0 ]; do
case "$1" in
@@ -86,12 +91,19 @@ fi
# Captured console logs are per-run and often carry DUT serials, so they are
# never shipped; the empty logs/ directory itself is kept because Script A's
# logopen writes into it.
#
# hammer/ is excluded as well: it is ~99 MB of mlucas ELF binaries that the DUT
# image already carries, and it is gitignored. Without this exclude the bundle
# would depend on whether the developer happened to have the binaries sitting in
# src/ - 100 MB from one machine, 200 KB from a fresh clone.
mkdir -p -- "${DEST}" || die "cannot create ${DEST}"
if command -v rsync >/dev/null 2>&1; then
rsync -a --exclude='*.log' "${SRC_DIR}/" "${DEST}/" || die "rsync failed"
rsync -a --exclude='*.log' --exclude='hammer/' "${SRC_DIR}/" "${DEST}/" \
|| die "rsync failed"
else
cp -a -- "${SRC_DIR}/." "${DEST}/" || die "cp failed"
find "${DEST}" -type f -name '*.log' -delete
rm -rf -- "${DEST}/hammer"
fi
# Tera Term's logopen target, in case the source tree never had one
src/Script_ABC_Blanton/1_Blanton_Script_A.ttl
+265 -3
View File
@@ -1,7 +1,7 @@
; =============================================================================
; Script A for Blanton
; Version : V1.1.2
; Date : 2026-08-28
; Version : V1.1.8
; Date : 2026-09-06
; Author : ETWen
; =============================================================================
; Version History:
@@ -161,6 +161,264 @@
; the job dir for the USB archive
; Fix: that cp said nfc_polling.log - the file is
; nfc_poll.log, so the NFC log never reached the USB
; V1.1.3 2026-08-30 LTC2980_Margin_Script/settings/*.conf VNOM is now the measured median, not the spec value
; 86 of 144 rails moved up +0.8% .. +2.5%
; (3.3 -> 3.38, 0.9 -> 0.915, 0.8 -> 0.82, ...)
; This is NOT display-only: VNOM is the denominator of
; margin_status deviation % AND the basis margin_set
; derives high/low/OV/UV from, so the whole margin
; window shifts with it
; !! margin logs from before/after cannot be compared
; LTC2980_Margin_Script/profiles/ Add per-CONN SWB profiles, drop comboA/comboB
; combo_SWB_CONN13..16_{high,low} - the percentages
; follow that board rails, so applying one to a
; different CONN margins the wrong things, silently
; SWB0 and SWB1 share a profile per CONN (same rails)
; LTC2980_Margin_Script/script/*.sh Fix: margin_apply_profile_all.sh still pointed every
; board at comboA, which this change deleted - all 9
; boards would have failed with "Profile not found"
; docs/LTC2980_channel_map.csv Regenerated (tools/gen_channel_map.sh) - it is output
; V1.1.4 2026-08-31 4_Blanton_Script_thermal_safety.ttl Add the thermal / safety run - a STANDALONE script,
; not part of the A -> B -> C chain
; Script A style setup (login, session, fan, wait_init,
; DUT info, BMC, PCIe clear, pcie_bus, pmon, dmesg)
; then FULL LOAD: mlucas-avx2 -cpu 0:15 in the
; background + blanton_tr518.sh start
; then while 1: setup_pmon + TH6_SWB0/SWB1 power
; readback + bgctl list + jobs, pause 60
; !! no teardown section: after you interrupt it the
; unit is still on port cd lb=mac / l2 learn off /
; test mode nr=yes - run blanton_tr518.sh stop
; !! it drives the same ports as traffic and BER, so it
; cannot share a DUT with Script B
; ScriptB Drop the margin scan from the soak loop
; The loop is a fast per-minute sample; margin_status
; walks 9 LTC2980 over I2C and dominated the round
; ScriptC Take the margin scan instead, once, before uptime
; Trade-off: no margin drift DURING the soak any more,
; only a start (Script A) and end (Script C) reading
; ScriptC exit + wait "Script done" before hw-test-session
; finish - leaves the session shell first, so finish
; runs in the login shell that opened it
; docs/Blanton_Test_Flow.drawio Add the A/B/C + thermal flow diagram
; V1.1.5 2026-09-01 ScriptB Stress jobs now last the whole soak
; BMC DDR memtester 64M 1 -> 64M (loop count
; dropped = runs until stopped)
; SSD --runtime 3600 -> 86400
; USB --runtime 60 -> 86400
; The USB one finished after 60 SECONDS, so an
; overnight run had USB idle for all but the first
; minute and nothing said so
; !! 86400 is 24h: a soak longer than that leaves SSD
; and USB dead for the remainder - the per-round
; bgctl list (V1.0.10) is where that shows up
; Blanton_Script/blanton_multiphase_margin.sh Add multiphase VRM margin over the native i2c buses
; high3 / low3 / comboA / comboB / save, -u 0|1|all
; 38 rails (19 per SWB), one line each:
; SWB0_0V9_ANLG0 - 0.930V Configure Done
; save has no per-rail map, prints Multiphase Save All
; !! save is STORE_USER_ALL - permanent, survives a
; power cycle
; !! these are NOT the LTC2980s margin.sh drives; the
; two tools reach the same rails from different
; sides - do not run both
; Blanton_Script/blanton_traffic_linespeed.sh v0.7.0 tx gains PatternRandom, defaults change
; tx 100 length=512 -> tx 200 length=324
; every burst now ends PatternRandom=yes, ce0 included
; A fixed pattern can sit on a benign bit sequence for
; a whole run; random is what exposes a weak lane
; -r no forces the fixed pattern, -r "" omits the
; argument entirely (pre-v0.7.0 wire format)
; !! bytes per burst went 51200 -> 64800 (+27%), so
; counter totals are not comparable across this
; build - the PASS/FAIL cross-check is unaffected
; tools/Multiphase_*.txt Bench command references for the new script
; V1.1.6 2026-09-02 Blanton_Script/pwr_brick.sh Add PDB / CPB power brick readings
; 5 devices, Vin / Iin / Vout / Iout / Temp:
; SWB0.PU207 0x62 SWB0.PU13 0x63
; SWB1.PU332 0x60 SWB1.PU85 0x61
; CPB.PU37 0x26
; The four ADPM12200 put each measurement on its own
; PMBus PAGE, so a PAGE write has to precede every
; read - blanton_pwr_data.sh sends none, which is why
; it reports the whole PDB table as NA
; Vin PAGE 9 Iin PAGE 10 Vout PAGE 2
; Iout PAGE 14 Temp PAGE 18
; !! the bring-up spreadsheet wrote those page numbers
; in decimal but with an 0x prefix (10 -> 0x10,
; 14 -> 0x14, 18 -> 0x18). Only Vout worked,
; because 2 reads the same either way
; Conversions are the datasheet DIRECT equation
; X = (1/m)(Y x 10^-R - b), Table 3: voltage Y x 8mV,
; current Y x 0.04A, temperature Y x 0.01C
; Checked: READ_VOUT 0x05D4 -> 11936 mV, the same
; figure show platform reports for that rail
; !! Table 3 does NOT list READ_VIN / READ_IIN; they
; borrow the voltage / current coefficients here
; Each value is re-read until it passes: not 0xFFFF,
; not 0x0000, and inside a plausibility window. This
; bus corrupts the HIGH BYTE only, which turns 11.98 V
; into 32.00 V - a value no all-ones filter catches
; docs/ADPM12200..._Datasheet_2025_12_19.pdf The brick datasheet the pages and coefficients above
; came from
; ScriptC Re-enable the BMC USB service log, and send it to
; a file instead of the console
; journalctl ... -o short-iso > log/bmc_usb_net.log
; then cp it into the job dir for the USB archive
; rm -f first, so the file is this run only
; -o short-iso gives it timestamps that line up with
; the other monitor logs
; !! it no longer appears in the master console log,
; so the USB copy is now the ONLY copy - if that
; cp fails the service log is gone
; LTC2980_Margin_Script/profiles/ Add comboA / comboB per board (CB + SWB CONN13..16)
; Checkerboard pair: comboB is comboA with every
; direction flipped, so running both covers each rail
; high and low while its neighbours sit the other way
; NC channels stay nominal in both (CONN14 CH10/11/13,
; CONN15 CH10) - nothing to margin on an unused rail
; V1.1.7 2026-09-04 Blanton_Script/blanton_multiphase_margin.sh v1.1.0 Add the 'normal' sub-command
; Puts all 38 rails back to their nominal set point,
; from tools/Multiphase_Normal.txt - same rails and the
; same per-rail reporting as the margin profiles
; Until now the only way back from a margin was a power
; cycle, and 'save' run while margined would have
; committed the offsets to NVM, where a power cycle does
; not help either
; !! TH6_CORE is 0.8 V nominal but settles near 0.8591 V
; once the load line is active - reading back 0.859
; after 'normal' is the load line, not a failed write
; tools/Multiphase_Normal.txt Bench command reference for the above
; 5_Blanton_Script_Reboot_Cycle.ttl Created Reboot-cycle run - a STANDALONE script, not
; chained to A -> B -> C and not using hw-test-session:
; every cycle is a fresh boot, so there is nothing to
; carry over and nothing to tear down
; while 1: login -> sudo -i -> date -s -> fans -> wait_init
; -> Check Pt1..Pt13 -> show uptime -> reboot ->
; wait 'Booting in blind mode'
; cnt_cycle is printed in the banner of every round
; Pt1 DUT info (boot/version/fwutil/syseeprom/ssdhealth/
; TPM/NVMe) Pt2 BMC info + source the bash tools
; Pt3 mgmt ping Pt4 NFC poll (20 s)
; Pt5 SSD stress Pt6 USB stress (node from
; usb_target.sh, not a fixed sda1)
; Pt7 BMC USB net Pt8 100G port status + 15 s traffic
; Pt9 BER sweep Pt10 NVMe error info
; Pt11 platform data Pt12 dmesg i2c
; Pt13 PCIe error counters + ras-mc-ctl
; !! there is NO exit condition - the only way to stop it
; is to close the Tera Term macro
; !! NOT verified on hardware yet
; The cdc_ncm probe sets timeout = 15 and restores it to 0
; BEFORE the if, so both branches are covered in one line -
; the ping block below it waits on a 'sleep 10', which is
; already two thirds of the cap on a loaded DUT
; The probe was copied from Script B without its :skip_ping
; label, so 'goto skip_ping' had no target. Tera Term only
; raises that when it actually jumps, i.e. only when the
; NCM interface is missing - the label is now there
; Renumbered the second 'Check Pt12' (PCIe error counters)
; to Pt13; Pt1..Pt13 are now unique
; ScriptB Restore timeout = 0 on the cdc_ncm success path too
; It was only restored at :skip_ping, which the success
; path reaches several waits later - until then every wait
; was capped at 15 s instead of blocking
; .gitignore Ignore tmp/ - scripts not yet verified on hardware
; blanton_reboottest.sh (the bash port of the reboot cycle,
; for running without Tera Term) lives there until it has
; been run on a DUT. Unverified scripts must not reach the
; publish bundle: the tester cannot tell which ones to
; trust once they are side by side in Blanton_Script/
; config.ttl Add SSD_RUNTIME / SSD_COUNT / USB_RUNTIME / USB_COUNT
; The SSD and USB stress durations were hard-coded in
; ScriptB (--runtime 86400 --passes 5 / 1); they are now
; declared in one place per site
; !! --runtime is the job's OVERALL limit, not per pass:
; qfx5252-stress-* stops at RUNTIME seconds whatever
; --passes says. RUNTIME 600 = a 10 minute stress,
; not 600 x COUNT. For a 24 h soak set RUNTIME 86400
; ScriptB Build the SSD / USB stress commands from those knobs
; sprintf2 cmd_ssd ... SSD_RUNTIME SSD_COUNT, and the same
; for USB; the old hard-coded lines are left commented out
; next to them
; V1.1.8 2026-09-06
; ScriptA Drive logopen's timestamp flag from EN_timestamp
; logopen filename 0 1 1 EN_timestamp, with the argument
; order spelled out above the call: <file> <binary>
; <append> <PlainText> <timestamp>
; binary must stay 0. In binary mode Tera Term writes the
; raw stream and both PlainText and the timestamp are
; ignored
; !! EN_timestamp has to exist in config.ttl. An undefined
; variable aborts the macro at logopen, it is not read
; as 0
; !! the timestamp FORMAT lives in TERATERM.INI (Setup >
; Additional settings > Log), so it follows the PC and
; not this script. Two testers can produce differently
; stamped logs from one macro
; ScriptB Run mlucas as a systemd unit, not a shell background job
; systemd-run --unit=mlucas-amm --property=Type=exec
; --property=Restart=always --property=RestartSec=2
; The '&' job belonged to the interactive shell: it died
; with the session, and 'jobs' could not see it from a
; reconnected one, so a soak that lost its terminal quietly
; stopped loading the CPU
; The log is truncated with '>' before the unit starts and
; appended with '>>' inside it, so a restart adds to the
; run instead of erasing it
; 'systemctl is-active mlucas-amm' now sits beside 'jobs',
; both in the one-shot check and in the monitor loop at the
; end
; !! the old '&' line is kept commented out directly above
; it, to fall back to if systemd-run is unavailable
; ScriptB Take the BMC USB ping duration from BMC_USB_RUNTIME
; sprintf2 cmd '... -w %d ...' ncm_if BMC_USB_RUNTIME. It
; was hard-coded to 14400 (4 h), which no longer matched
; the soak the SSD and USB knobs were set for
; ScriptC Stop mlucas-amm and copy its log to the USB stick
; utils/kill_all_process.ttl is only "kill $(jobs -p)", and
; a systemd unit is not a shell job
; ScriptB's change on its own would have left mlucas
; loading all 16 cores through ScriptC and into the next
; run, so every temperature and power reading after it
; would have been taken under load
; cp ~/hammer/tools/amd/mlucas_amm_log /host/hw-eval/jobs/
; joins the other stress logs
; !! ScriptB and ScriptC change together. Whoever moves a
; stress job to systemd owns the matching stop in
; ScriptC
; Script4 Use the same mlucas-amm systemd unit as ScriptB
; The thermal / safety macro started mlucas the same way
; ScriptB used to, with '&', so it had the same failure:
; the load quietly ended when the console went away, in the
; one test where a long steady full load is the whole point
; 'systemctl is-active mlucas-amm' joins 'bgctl list' and
; 'jobs' in the monitor loop
; !! Script4 still has no teardown section, so the matching
; stop is manual: blanton_tr518.sh stop AND systemctl
; stop mlucas-amm. Closing Tera Term no longer stops the
; CPU load, and 'kill $(jobs -p)' never reached a unit
; config.ttl Add EN_timestamp and BMC_USB_RUNTIME, raise stress runtimes
; EN_timestamp = 1 feeds ScriptA's logopen; BMC_USB_RUNTIME
; = 172800 feeds ScriptB's ping unit
; SSD_RUNTIME and USB_RUNTIME 600 -> 3600, so the shipped
; default is a one hour stress rather than the ten minutes
; V1.1.7 went out with
; !! --runtime is still the job's OVERALL limit. RUNTIME
; 3600 = one hour of stress; COUNT does not multiply it.
; For a 2 day soak set RUNTIME 172800
; .gitignore Ignore src/Script_ABC_Blanton/hammer/
; ~99 MB of unstripped mlucas ELF binaries (avx512 / avx2 /
; avx / sse2 / generic-c) that ScriptB and the thermal
; macro chmod and run on the DUT
; !! they are deliberately NOT in git. A binary tree that
; large is permanent once committed and every clone pays
; for it forever; the DUT image already carries hammer/
; publish/publish.sh Exclude hammer/ from the delivery bundle
; rsync copies whatever sits in src/, so a developer who
; happened to have the binaries locally would have shipped
; a 100 MB zip while a clone shipped 200 KB. The bundle is
; now the same either way
; =============================================================================
include "config.ttl"
@@ -173,7 +431,11 @@ getdir mdir
if EN_log = 1 then
sprintf2 filename '%s\Logs\%s_%s_%s.log' mdir project_name strTestcase str_starttime
logopen filename 0 1 1 1
; logopen <file> <binary> <append> <PlainText> <timestamp>
; binary=0 text mode, so PlainText / timestamp are honoured
; append=1 keep earlier cycles, do not overwrite
; PlainText=1 strip the ANSI colour codes SONiC emits
logopen filename 0 1 1 EN_timestamp
endif
; ========== Root Login ==========
src/Script_ABC_Blanton/2_Blanton_Script_B.ttl
+19 -9
View File
@@ -15,10 +15,15 @@ pause 1
;sendln "command"
; ========== AMD CPU STRESS TEST ==========
; Clear the log file first
wait prompt_sonic_root
sendln "> ~/hammer/tools/amd/mlucas_amm_log"
wait prompt_sonic_root
sendln 'chmod +x ~/hammer/tools/amd/mlucas-avx2'
wait prompt_sonic_root
sendln "~/hammer/tools/amd/mlucas-avx2 -s l -cpu 0:15 > ~/hammer/tools/amd/mlucas_amm_log 2>&1 &"
;sendln "~/hammer/tools/amd/mlucas-avx2 -s l -cpu 0:15 > ~/hammer/tools/amd/mlucas_amm_log 2>&1 &"
sendln "systemd-run --unit=mlucas-amm --property=Type=exec --property=Restart=always --property=RestartSec=2 /bin/bash -c '~/hammer/tools/amd/mlucas-avx2 -s l -cpu 0:15 >> ~/hammer/tools/amd/mlucas_amm_log 2>&1'"
; ========== BMC DDR Stress Test ==========
;wait prompt_sonic_root
@@ -26,7 +31,8 @@ sendln "~/hammer/tools/amd/mlucas-avx2 -s l -cpu 0:15 > ~/hammer/tools/amd/mluca
;wait prompt_sonic_root
;sendln "./Blanton_Script/bmc_monitor.sh start"
wait prompt_sonic_root
sendln "bgctl run bmc-manager run '/usr/bin/memtester 64M 1'"
;sendln "bgctl run bmc-manager run '/usr/bin/memtester 64M 1'"
sendln "bgctl run bmc-manager run '/usr/bin/memtester 64M'" ; Continue Execture
; ========== BMC Monitor Test ==========
wait prompt_sonic_root
@@ -39,8 +45,10 @@ wait prompt_sonic_root
sendln "bgctl run /usr/sbin/memtester 1G" ; Continue Execture
; ========== SSD read/write ==========
sprintf2 cmd_ssd "bgctl run qfx5252-stress-ssd 1G --runtime %d --passes %d --write --force --log /host/hw-eval/jobs/qfx5252-stress-ssd.log" SSD_RUNTIME SSD_COUNT
wait prompt_sonic_root
sendln "bgctl run qfx5252-stress-ssd 1G --runtime 3600 --passes 5 --write --force --log /host/hw-eval/jobs/qfx5252-stress-ssd.log"
;sendln "bgctl run qfx5252-stress-ssd 1G --runtime 86400 --passes 5 --write --force --log /host/hw-eval/jobs/qfx5252-stress-ssd.log"
sendln cmd_ssd
; ========== USB read/write ==========
; ---- Get USB partition node -> usb_dev ----
@@ -51,7 +59,8 @@ waitregex '<<DEV=([^>]*)>>'
usb_dev = groupmatchstr1
wait prompt_sonic_root
sprintf2 cmd "bgctl run qfx5252-stress-usb %s 256M --runtime 60 --passes 1 --write --log /host/hw-eval/jobs/qfx5252-stress-usb.log" usb_dev
;sprintf2 cmd "bgctl run qfx5252-stress-usb %s 256M --runtime 86400 --passes 1 --write --log /host/hw-eval/jobs/qfx5252-stress-usb.log" usb_dev
sprintf2 cmd "bgctl run qfx5252-stress-usb %s 256M --runtime %d --passes %d --write --log /host/hw-eval/jobs/qfx5252-stress-usb.log" usb_dev USB_RUNTIME USB_COUNT
sendln cmd
;wait prompt_sonic_root
@@ -61,6 +70,8 @@ sendln cmd
wait prompt_sonic_root
sendln "jobs"
wait prompt_sonic_root
sendln "systemctl is-active mlucas-amm"
wait prompt_sonic_root
sendln "bgctl list"
; ========== BMC USB Test ==========
@@ -72,6 +83,7 @@ if result = 0 then
messagebox 'cdc_ncm interface not found. Ping test skipped.' 'ERROR'
goto skip_ping
endif
timeout = 0
strlen matchstr
cut_len = result - 6 ; 'NCMIF=' = 6 chars
strcopy matchstr 7 cut_len ncm_if ; -> ncm_if = "eth2" / "eth3"
@@ -84,7 +96,7 @@ wait prompt_sonic_root
sendln 'systemctl stop qfx5252-bmc-usb-net-test.service 2>/dev/null || true'
wait prompt_sonic_root
sendln 'systemctl reset-failed qfx5252-bmc-usb-net-test.service 2>/dev/null || true'
sprintf2 cmd 'systemd-run --unit=qfx5252-bmc-usb-net-test --property=Type=exec /usr/bin/ping -I %s -i 1 -W 2 -w 14400 192.168.200.200' ncm_if
sprintf2 cmd 'systemd-run --unit=qfx5252-bmc-usb-net-test --property=Type=exec /usr/bin/ping -I %s -i 1 -W 2 -w %d 192.168.200.200' ncm_if BMC_USB_RUNTIME
wait prompt_sonic_root
sendln cmd
@@ -174,9 +186,7 @@ while 1
sendln "bgctl list"
wait prompt_sonic_root
sendln "jobs"
; ========== Check Margin ==========
if EN_Margin = 1 then
include "utils/show_margin_status.ttl"
endif
wait prompt_sonic_root
sendln "systemctl is-active mlucas-amm"
pause 60
endwhile
src/Script_ABC_Blanton/3_Blanton_Script_C.ttl
+22 -2
View File
@@ -12,6 +12,11 @@ pause 1
; ========== Kill Process ==========
include "utils/kill_all_process.ttl"
wait prompt_sonic_root
sendln "systemctl is-active mlucas-amm"
wait prompt_sonic_root
sendln "systemctl stop mlucas-amm"
; bgctrl all stop
wait prompt_sonic_root
sendln "bgctl stop --all"
@@ -78,8 +83,10 @@ wait prompt_sonic_root
sendln "cat ./Blanton_Script/log/bmc_poll.log"
; ========== BMC USB Test result ==========
;wait prompt_sonic_root
;sendln "journalctl -u qfx5252-bmc-usb-net-test.service --no-pager"
wait prompt_sonic_root
sendln "rm -f ~/Blanton_Script/log/bmc_usb_net.log"
wait prompt_sonic_root
sendln "journalctl -u qfx5252-bmc-usb-net-test.service --no-pager -o short-iso > ~/Blanton_Script/log/bmc_usb_net.log"
; ========== CHECK Stress results ==========
@@ -184,6 +191,11 @@ sendln "/usr/sbin/smartctl -x /dev/nvme0"
wait prompt_sonic_root
sendln "show reboot-cause"
; ========== Check Margin ==========
if EN_Margin = 1 then
include "utils/show_margin_status.ttl"
endif
; ========== Show Power on uptime ==========
wait prompt_sonic_root
sendln "show uptime"
@@ -204,12 +216,17 @@ sendln cmd
; ========== Copy Stress Log to USB ==========
wait prompt_sonic_root
sendln "cp ~/hammer/tools/amd/mlucas_amm_log /host/hw-eval/jobs/"
wait prompt_sonic_root
sendln "cp ./Blanton_Script/log/bmc_usb_net.log /host/hw-eval/jobs/"
wait prompt_sonic_root
sendln "cp ./Blanton_Script/log/bmc_poll.log /host/hw-eval/jobs/"
wait prompt_sonic_root
sendln "cp ./Blanton_Script/log/mgmt_ping.log /host/hw-eval/jobs/"
wait prompt_sonic_root
sendln "cp ./Blanton_Script/log/nfc_poll.log /host/hw-eval/jobs/"
wait prompt_sonic_root
getdate ts_date "%Y%m%d"
gettime ts_time "%H%M"
@@ -219,6 +236,9 @@ sendln cmd
; ========== HW Test Session ==========
wait prompt_sonic_root
sendln "exit"
wait "Script done"
wait prompt_sonic_root
sendln "hw-test-session finish"
wait prompt_sonic_root
sendln "bgctl reset --yes"
src/Script_ABC_Blanton/4_Blanton_Script_thermal_safety.ttl
+164
View File
@@ -0,0 +1,164 @@
include "config.ttl"
flushrecv
;================================================================
; Log File Creation
;================================================================
gettime str_starttime "%Y%m%d-%H%M%S"
getdir mdir
if EN_log = 1 then
sprintf2 filename '%s\Logs\%s_%s_%s.log' mdir project_name strTestcase str_starttime
logopen filename 0 1 1 1
endif
; ========== Root Login ==========
wait prompt_login
sendln "admin"
wait "Password:"
sendln "YourPaSsWoRd"
wait prompt_sonic
sendln "sudo -i"
; ========== Pre Setting ==========
; Make log directory
wait prompt_sonic_root
sendln "mkdir ./logs"
; Setting System Time
getdate datestr
gettime timestr
sprintf2 cmd 'sudo date -s "%s %s"' datestr timestr
sendln cmd
;Stress log clear
wait prompt_sonic_root
sendln "rm /host/hw-eval/jobs/*"
; ========== HW Test Session ==========
; Clear session
wait prompt_sonic_root
sendln "hw-test-session finish"
wait prompt_sonic_root
sendln "bgctl reset --yes"
wait prompt_sonic_root
sendln "bgctl stop --all"
wait prompt_sonic_root
sendln "bgctl list"
wait prompt_sonic_root
sendln "hw-test-session start"
wait prompt_sonic_root
sendln "hw-test-session log"
wait prompt_sonic_root
sendln "hw-test-session status"
; ========== FAN SPEED ==========
wait prompt_sonic_root
sendln "echo 18-0020 > /sys/bus/i2c/drivers/max31790/unbind"
wait prompt_sonic_root
sendln "sleep .5"
wait prompt_sonic_root
sendln "echo 18-0020 > /sys/bus/i2c/drivers/max31790/bind"
wait prompt_sonic_root
sendln "echo 25-0020 > /sys/bus/i2c/drivers/max31790/unbind"
wait prompt_sonic_root
sendln "sleep .5"
wait prompt_sonic_root
sendln "echo 25-0020 > /sys/bus/i2c/drivers/max31790/bind"
wait prompt_sonic_root
sprintf2 fan_ctrl_cmd 'fan-speed-control.sh %d' FAN_SPEED
sendln fan_ctrl_cmd
wait "Set all configured fan channels to"
sendln "y"
; ========== Wait DUT Init ==========
include "utils/wait_init.ttl"
; ========== DUT Info ==========
wait prompt_sonic_root
sendln "show boot"
wait prompt_sonic_root
sendln "show version"
wait prompt_sonic_root
sendln "fwutil show status"
wait prompt_sonic_root
sendln "show system-memory"
wait prompt_sonic_root
sendln "show service"
wait prompt_sonic_root
sendln "show platform syseeprom"
wait prompt_sonic_root
sendln "show platform ssdhealth"
wait prompt_sonic_root
sendln "qfx5252-tpm-version"
wait prompt_sonic_root
sendln "/usr/sbin/nvme smart-log -H /dev/nvme0"
wait prompt_sonic_root
sendln "/usr/sbin/smartctl -x /dev/nvme0"
; ========== BMC version ==========
;wait prompt_sonic_root
;sendln "bmc-manager run 'cat /etc/issue'"
wait prompt_sonic_root
sendln "bmc-first-enroll"
wait prompt_sonic_root
sendln "bmc-manager version"
wait prompt_sonic_root
sendln "bmc-manager status"
; ========== CLEAR PCIE Error ==========
include "utils/show_pcie_error_reg_TH6_SWB0.ttl"
include "utils/show_pcie_error_reg_TH6_SWB1.ttl"
include "utils/show_pcie_error_reg_FPGA.ttl"
include "utils/show_pcie_error_reg_BMC.ttl"
include "utils/show_pcie_error_reg_DDR.ttl"
include "utils/show_pcie_error_reg_I210.ttl"
include "utils/show_pcie_error_reg_SSD.ttl"
wait prompt_sonic_root
sendln "/usr/sbin/ras-mc-ctl --summary"
; ========== Check PCIE tree + PCIE link status + GET PCIE bandwidth Test ==========
include "utils/pcie_bus.ttl"
; ========== TAKE DATA ==========
include "utils/setup_pmon.ttl"
include "utils/show_dmesg.ttl"
; ========== Full Load ==========
; AMD CPU STRESS TEST
; Clear the log file first
wait prompt_sonic_root
sendln "> ~/hammer/tools/amd/mlucas_amm_log"
wait prompt_sonic_root
sendln 'chmod +x ~/hammer/tools/amd/mlucas-avx2'
wait prompt_sonic_root
;sendln "~/hammer/tools/amd/mlucas-avx2 -s l -cpu 0:15 > ~/hammer/tools/amd/mlucas_amm_log 2>&1 &"
sendln "systemd-run --unit=mlucas-amm --property=Type=exec --property=Restart=always --property=RestartSec=2 /bin/bash -c '~/hammer/tools/amd/mlucas-avx2 -s l -cpu 0:15 >> ~/hammer/tools/amd/mlucas_amm_log 2>&1'"
; TR518 TEST
wait prompt_sonic_root
sendln "~/Blanton_Script/blanton_tr518.sh start"
while 1
; Base info polling
include "utils/setup_pmon.ttl"
; TH6 Power Polling
wait prompt_sonic_root
sendln "~/Blanton_Script/TH6_SWB0_power_readback.sh"
wait prompt_sonic_root
sendln "~/Blanton_Script/TH6_SWB1_power_readback.sh"
; Background jobs Check
wait prompt_sonic_root
sendln "bgctl list"
wait prompt_sonic_root
sendln "jobs"
wait prompt_sonic_root
sendln "systemctl is-active mlucas-amm"
pause 60
endwhile
src/Script_ABC_Blanton/5_Blanton_Script_Reboot_Cycle.ttl
+419
View File
@@ -0,0 +1,419 @@
include "config.ttl"
flushrecv
;================================================================
; Log File Creation
;================================================================
gettime str_starttime "%Y%m%d-%H%M%S"
getdir mdir
if EN_log = 1 then
sprintf2 filename '%s\Logs\%s_%s_%s.log' mdir project_name "Reboot_Cycle" str_starttime
logopen filename 0 1 1 1
endif
cnt_cycle = 0
while 1
cnt_cycle = cnt_cycle + 1
; ========== Root Login ==========
wait prompt_login
sendln "admin"
wait "Password:"
sendln "YourPaSsWoRd"
wait prompt_sonic
sendln "sudo -i"
wait prompt_sonic_root
sendln "sleep 10"
wait prompt_sonic_root
sprintf2 strTitle "echo -e '\033[1;32mReboot Cycle : %d \033[0m'" cnt_cycle
sendln strTitle
; ========== Pre Setting ==========
; Make log directory
wait prompt_sonic_root
sendln "mkdir ./logs"
; Setting System Time
getdate datestr
gettime timestr
sprintf2 cmd 'sudo date -s "%s %s"' datestr timestr
sendln cmd
; ========== FAN SPEED ==========
wait prompt_sonic_root
sendln "echo 18-0020 > /sys/bus/i2c/drivers/max31790/unbind"
wait prompt_sonic_root
sendln "sleep .5"
wait prompt_sonic_root
sendln "echo 18-0020 > /sys/bus/i2c/drivers/max31790/bind"
wait prompt_sonic_root
sendln "echo 25-0020 > /sys/bus/i2c/drivers/max31790/unbind"
wait prompt_sonic_root
sendln "sleep .5"
wait prompt_sonic_root
sendln "echo 25-0020 > /sys/bus/i2c/drivers/max31790/bind"
wait prompt_sonic_root
sprintf2 fan_ctrl_cmd 'fan-speed-control.sh %d' FAN_SPEED
sendln fan_ctrl_cmd
wait "Set all configured fan channels to"
sendln "y"
; ========== Wait DUT Init ==========
include "utils/wait_init.ttl"
; ========== DUT Info ==========
wait prompt_sonic_root
sprintf2 strCKPt1 "echo -e '\033[36mCheck Pt1 : DUT Info\033[0m'"
sendln strCKPt1
wait prompt_sonic_root
sendln "show boot"
wait prompt_sonic_root
sendln "show version"
wait prompt_sonic_root
sendln "fwutil show status"
wait prompt_sonic_root
sendln "show system-memory"
wait prompt_sonic_root
sendln "show service"
wait prompt_sonic_root
sendln "show platform syseeprom"
wait prompt_sonic_root
sendln "show platform ssdhealth"
wait prompt_sonic_root
sendln "qfx5252-tpm-version"
wait prompt_sonic_root
sendln "/usr/sbin/nvme smart-log -H /dev/nvme0"
wait prompt_sonic_root
sendln "/usr/sbin/smartctl -x /dev/nvme0"
; ========== BMC version ==========
wait prompt_sonic_root
sprintf2 strCKPt2 "echo -e '\033[36mCheck Pt2 : BMC Info\033[0m'"
sendln strCKPt2
wait prompt_sonic_root
sendln "bmc-first-enroll"
wait prompt_sonic_root
sendln "bmc-manager version"
wait prompt_sonic_root
sendln "bmc-manager status"
; ========== Load Shell Script ==========
wait prompt_sonic_root
sendln "source ~/Blanton_Script/blanton_fpga_pcimem.sh"
wait prompt_sonic_root
sendln "source ~/Blanton_Script/blanton_cb_i2c.sh"
wait prompt_sonic_root
sendln "source ~/Blanton_Script/blanton_icb_vi2c.sh"
wait prompt_sonic_root
sendln "source ~/Blanton_Script/blanton_pwr_data.sh"
wait prompt_sonic_root
sendln "source ~/Blanton_Script/blanton_traffic_linespeed.sh"
wait prompt_sonic_root
sendln "source ~/Blanton_Script/LTC2980_Margin_Script/margin.sh"
; ========== CLEAR PCIE Error ==========
include "utils/show_pcie_error_reg_TH6_SWB0.ttl"
include "utils/show_pcie_error_reg_TH6_SWB1.ttl"
include "utils/show_pcie_error_reg_FPGA.ttl"
include "utils/show_pcie_error_reg_BMC.ttl"
include "utils/show_pcie_error_reg_DDR.ttl"
include "utils/show_pcie_error_reg_I210.ttl"
include "utils/show_pcie_error_reg_SSD.ttl"
wait prompt_sonic_root
sendln "/usr/sbin/ras-mc-ctl --summary"
; ========== Check PCIE tree + PCIE link status + GET PCIE bandwidth Test ==========
include "utils/pcie_bus.ttl"
; ========== TAKE DATA ==========
include "utils/setup_pmon.ttl"
include "utils/show_dmesg.ttl"
; ========== 10G/1G MGMT Ping Test ==========
wait prompt_sonic_root
sprintf2 strCKPt3 "echo -e '\033[36mCheck Pt3 : Mgmt Ping Test\033[0m'"
sendln strCKPt3
wait prompt_sonic_root
sendln "./Blanton_Script/mgmt_ping_monitor.sh start"
wait prompt_sonic_root
pause 30
sendln "~/Blanton_Script/mgmt_ping_monitor.sh stop"
wait prompt_sonic_root
sendln "cat ~/Blanton_Script/log/mgmt_ping.log"
wait prompt_sonic_root
sendln "~/Blanton_Script/mgmt_ping_monitor.sh clear"
; ========== NFC Test ==========
wait prompt_sonic_root
sprintf2 strCKPt4 "echo -e '\033[36mCheck Pt4 : NFC Test\033[0m'"
sendln strCKPt4
wait prompt_sonic_root
sendln "~/Blanton_Script/nfc_polling.sh start"
wait prompt_sonic_root
sendln "~/Blanton_Script/nfc_polling.sh status"
wait prompt_sonic_root
sendln "sleep 20"
wait prompt_sonic_root
sendln "~/Blanton_Script/nfc_polling.sh stop"
wait prompt_sonic_root
sendln "~/Blanton_Script/nfc_polling.sh report"
; ========== SSD read/write ==========
wait prompt_sonic_root
sprintf2 strCKPt5 "echo -e '\033[36mCheck Pt5 : SSD Test\033[0m'"
sendln strCKPt5
wait prompt_sonic_root
sendln "qfx5252-stress-ssd 1G --runtime 30 --passes 2 --write --force --log /host/hw-eval/jobs/qfx5252-stress-ssd.log"
wait prompt_sonic_root
sendln "cat /host/hw-eval/jobs/qfx5252-stress-ssd.log"
; ========== USB read/write ==========
wait prompt_sonic_root
sprintf2 strCKPt6 "echo -e '\033[36mCheck Pt6 : USB Test\033[0m'"
sendln strCKPt6
; ---- Get USB partition node -> usb_dev ----
usb_dev = ''
wait prompt_sonic_root
sendln 'D=$(bash ~/Blanton_Script/usb_target.sh -o dev 2>/dev/null); echo "<<D""EV=${D:-NONE}>>"'
waitregex '<<DEV=([^>]*)>>'
usb_dev = groupmatchstr1
wait prompt_sonic_root
sprintf2 cmd "qfx5252-stress-usb %s 256M --runtime 30 --passes 2 --write --log /host/hw-eval/jobs/qfx5252-stress-usb.log" usb_dev
sendln cmd
wait prompt_sonic_root
sendln "cat /host/hw-eval/jobs/qfx5252-stress-usb.log"
; ========== BMC USB Test ==========
wait prompt_sonic_root
sprintf2 strCKPt7 "echo -e '\033[36mCheck Pt7 : BMC USB Test\033[0m'"
sendln strCKPt7
wait prompt_sonic_root
sendln 'echo "NCMIF=$(ls -d /sys/bus/usb/drivers/cdc_ncm/*/net/* 2>/dev/null | head -n 1 | xargs -r basename)"'
; timeout is GLOBAL and sticky: left at 15, every 'wait' below gives up after
; 15 s instead of blocking, the macro runs ahead of the DUT and the whole
; cycle desynchronises. Restore it BEFORE the branch so both paths are
; covered - the ping block below waits on 'sleep 10', which is already two
; thirds of the 15 s cap on a loaded DUT.
timeout = 15
waitregex 'NCMIF=[A-Za-z0-9_-]+'
ncm_found = result ; hold it: 'result' is reused below
timeout = 0 ; restore, both paths
if ncm_found = 0 then
messagebox 'cdc_ncm interface not found. Ping test skipped.' 'ERROR'
goto skip_ping
endif
strlen matchstr
cut_len = result - 6 ; 'NCMIF=' = 6 chars
strcopy matchstr 7 cut_len ncm_if ; -> ncm_if = "eth2" / "eth3"
sprintf2 cmd 'ip -br link show %s' ncm_if
wait prompt_sonic_root
sendln cmd
wait prompt_sonic_root
sendln 'systemctl stop qfx5252-bmc-usb-net-test.service 2>/dev/null || true'
wait prompt_sonic_root
sendln 'systemctl reset-failed qfx5252-bmc-usb-net-test.service 2>/dev/null || true'
sprintf2 cmd 'systemd-run --unit=qfx5252-bmc-usb-net-test --property=Type=exec /usr/bin/ping -I %s -i 1 -W 2 -w 14400 192.168.200.200' ncm_if
wait prompt_sonic_root
sendln cmd
wait prompt_sonic_root
sendln "sleep 10"
wait prompt_sonic_root
sendln "systemctl stop qfx5252-bmc-usb-net-test.service"
wait prompt_sonic_root
sendln "journalctl -u qfx5252-bmc-usb-net-test.service --no-pager"
:skip_ping
timeout = 0 ; backstop, same as Script B
; ========== 100G Port Setting ==========
wait prompt_sonic_root
sendln "sudo sfputil lpmode off Ethernet513"
wait prompt_sonic_root
sendln "sudo sfputil lpmode off Ethernet514"
wait prompt_sonic_root
sendln "config interface -n asic0 startup Ethernet513"
wait prompt_sonic_root
sendln "config interface -n asic1 startup Ethernet514"
wait prompt_sonic_root
sendln "config save -y"
; ========== First Traffic Test ==========
; Silent MAC
wait prompt_sonic_root
sendln "config feature state lldp disabled"
wait prompt_sonic_root
sendln "config save -y"
; ========== 100G Port Status ==========
wait prompt_sonic_root
sprintf2 strCKPt8 "echo -e '\033[36mCheck Pt8 : Port Status and 15sec Traffic \033[0m'"
sendln strCKPt8
wait prompt_sonic_root
sendln "show interfaces status Ethernet513,Ethernet514"
; ========== Traffic Test ==========
if SWB_UNIT0 = 1 && SWB_UNIT1 = 1 then
wait prompt_sonic_root
sendln "blanton_traffic_linespeed ps"
wait prompt_sonic_root
sendln "blanton_traffic_linespeed init"
wait prompt_sonic_root
sendln "blanton_traffic_linespeed clear"
wait prompt_sonic_root
sendln "blanton_traffic_linespeed show"
wait prompt_sonic_root
sendln "blanton_traffic_linespeed start"
wait prompt_sonic_root
pause 15
sendln "blanton_traffic_linespeed stop"
wait prompt_sonic_root
sendln "blanton_traffic_linespeed report"
elseif SWB_UNIT0 = 1 && SWB_UNIT1 = 0 then
wait prompt_sonic_root
sendln "blanton_traffic_linespeed ps -u 0"
wait prompt_sonic_root
sendln "blanton_traffic_linespeed init -u 0"
wait prompt_sonic_root
sendln "blanton_traffic_linespeed clear -u 0"
wait prompt_sonic_root
sendln "blanton_traffic_linespeed show -u 0"
wait prompt_sonic_root
sendln "blanton_traffic_linespeed start -u 0"
wait prompt_sonic_root
pause 15
sendln "blanton_traffic_linespeed stop -u 0"
wait prompt_sonic_root
sendln "blanton_traffic_linespeed report -u 0"
elseif SWB_UNIT0 = 0 && SWB_UNIT1 = 1 then
wait prompt_sonic_root
sendln "blanton_traffic_linespeed ps -u 1"
wait prompt_sonic_root
sendln "blanton_traffic_linespeed init -u 1"
wait prompt_sonic_root
sendln "blanton_traffic_linespeed clear -u 1"
wait prompt_sonic_root
sendln "blanton_traffic_linespeed show -u 1"
wait prompt_sonic_root
sendln "blanton_traffic_linespeed start -u 1"
wait prompt_sonic_root
pause 15
sendln "blanton_traffic_linespeed stop -u 1"
wait prompt_sonic_root
sendln "blanton_traffic_linespeed report -u 1"
else
endif
; ========== BER ==========
; PRBS takes the SerDes out of normal operation, so this runs AFTER the
; traffic report. sleep 30 matches blanton_ber.sh BER_INTERVAL - reporting
; earlier reads an interval that has not finished accumulating.
wait prompt_sonic_root
sprintf2 strCKPt8 "echo -e '\033[36mCheck Pt9 : BER Test \033[0m'"
sendln strCKPt8
if SWB_UNIT0 = 1 && SWB_UNIT1 = 1 then
wait prompt_sonic_root
sendln "./Blanton_Script/blanton_ber.sh init"
wait prompt_sonic_root
sendln "./Blanton_Script/blanton_ber.sh start"
wait prompt_sonic_root
sendln "sleep 30"
wait prompt_sonic_root
sendln "./Blanton_Script/blanton_ber.sh report"
wait prompt_sonic_root
sendln "./Blanton_Script/blanton_ber.sh stop"
wait prompt_sonic_root
sendln "./Blanton_Script/blanton_ber.sh clear"
elseif SWB_UNIT0 = 1 && SWB_UNIT1 = 0 then
wait prompt_sonic_root
sendln "./Blanton_Script/blanton_ber.sh init -u 0"
wait prompt_sonic_root
sendln "./Blanton_Script/blanton_ber.sh start -u 0"
wait prompt_sonic_root
sendln "sleep 30"
wait prompt_sonic_root
sendln "./Blanton_Script/blanton_ber.sh report -u 0"
wait prompt_sonic_root
sendln "./Blanton_Script/blanton_ber.sh stop -u 0"
wait prompt_sonic_root
sendln "./Blanton_Script/blanton_ber.sh clear -u 0"
elseif SWB_UNIT0 = 0 && SWB_UNIT1 = 1 then
wait prompt_sonic_root
sendln "./Blanton_Script/blanton_ber.sh init -u 1"
wait prompt_sonic_root
sendln "./Blanton_Script/blanton_ber.sh start -u 1"
wait prompt_sonic_root
sendln "sleep 30"
wait prompt_sonic_root
sendln "./Blanton_Script/blanton_ber.sh report -u 1"
wait prompt_sonic_root
sendln "./Blanton_Script/blanton_ber.sh stop -u 1"
wait prompt_sonic_root
sendln "./Blanton_Script/blanton_ber.sh clear -u 1"
else
endif
; ========== NVME Err Info ==========
wait prompt_sonic_root
sprintf2 strCKPt9 "echo -e '\033[36mCheck Pt10 : NVME Err Info \033[0m'"
sendln strCKPt9
wait prompt_sonic_root
sendln "/usr/sbin/nvme smart-log -H /dev/nvme0"
wait prompt_sonic_root
sendln "/usr/sbin/smartctl -x /dev/nvme0"
; ========== TAKE DATA ==========
wait prompt_sonic_root
sprintf2 strCKPt10 "echo -e '\033[36mCheck Pt11 : Platform Data \033[0m'"
sendln strCKPt10
include "utils/setup_pmon.ttl"
wait prompt_sonic_root
sprintf2 strCKPt12 "echo -e '\033[36mCheck Pt12 : Dmesg_i2c \033[0m'"
sendln strCKPt12
include "utils/show_dmesg.ttl"
; ========== Check PCIE error counters ==========
wait prompt_sonic_root
sprintf2 strCKPt13 "echo -e '\033[36mCheck Pt13 : PCIE Error Counters \033[0m'"
sendln strCKPt13
include "utils/show_pcie_error_reg_TH6_SWB0.ttl"
include "utils/show_pcie_error_reg_TH6_SWB1.ttl"
include "utils/show_pcie_error_reg_FPGA.ttl"
include "utils/show_pcie_error_reg_BMC.ttl"
include "utils/show_pcie_error_reg_DDR.ttl"
include "utils/show_pcie_error_reg_I210.ttl"
include "utils/show_pcie_error_reg_SSD.ttl"
wait prompt_sonic_root
sendln "/usr/sbin/ras-mc-ctl --summary"
; ========== Show Power on uptime ==========
wait prompt_sonic_root
sendln "show uptime"
; ========== Show Power on uptime ==========
wait prompt_sonic_root
sendln "reboot"
wait "Booting in blind mode"
endwhile
src/Script_ABC_Blanton/Blanton_Script/LTC2980_Margin_Script/README.md
+26 -6
View File
@@ -72,13 +72,13 @@ margin_operation 0 high
margin_operation 0 nominal
# 批次套用 profile（套在當前載入的 LTC2980）
margin_apply_profile profiles/comboA.conf
margin_apply_profile profiles/comboB.conf
margin_apply_profile profiles/combo_SWB_CONN13_high.conf
margin_apply_profile profiles/combo_SWB_CONN13_low.conf
margin_apply_profile profiles/all_off.conf
# 切換到另一顆 LTC2980
margin_init Blanton_SWB1_CONN16
margin_apply_profile profiles/comboA.conf
margin_apply_profile profiles/combo_SWB_CONN16_high.conf
# 儲存到 NVM（斷電後保留）
margin_save # 只寫當前載入的那顆
@@ -108,7 +108,7 @@ BOARDS=(
## 一次套 profile 到所有 LTC2980
`script/margin_apply_profile_all.sh` 對多顆 LTC2980 依 `BOARDS[i]` 配對
`PROFILES[i]` 套用 profile（預設全部 `comboA`）。
`PROFILES[i]` 套用 profile（預設 SWB 各用自己 CONN 的 `_high`，CB 用 `combo_high3`）。
```bash
source script/margin_apply_profile_all.sh
@@ -124,8 +124,8 @@ BOARDS=(
)
PROFILES=(
"comboA" # Blanton_CB_CONN13
"comboB" # Blanton_SWB0_CONN13 ← 改成 comboB
"combo_high3" # Blanton_CB_CONN13
"combo_SWB_CONN13_high" # Blanton_SWB0_CONN13
...
)
```
@@ -133,6 +133,10 @@ PROFILES=(
`PROFILES` 寫名字即可（不含路徑跟 `.conf`），script 會自動展開成
`profiles/<name>.conf`。兩個陣列長度不一致會直接報錯。
> ⚠️ **SWB 的 profile 是 per-CONN 的**：每個檔的百分比對應該片板子的軌，
> 套到別的 CONN 會 margin 到錯的東西（而且不會報錯）。這裡不能全部填同一個名字。
> HIGH / LOW 兩輪就是把 `_high` 全換成 `_low` 再跑一次。
## 一次把所有 LTC2980 寫入 NVM
> ⚠️ `margin_save` 會把當前 margin / OV / UV 設定**永久寫入 NVM**，
@@ -217,6 +221,22 @@ i2cset -f -y 14 0x62 0x15 ; i2cset -f -y 14 0x64 0x15 # SWB1 CONN16
不要讓它去打不存在的板子。bus 節點不存在（`/dev/i2c-N` 沒有）與晶片不回應（NACK）
會分別報不同訊息 —— 前者代表 FPGA 的 i2c adapter 根本沒 enumerate，後者才是板子的問題。
## Profile 一覽
| Profile | 適用 | 說明 |
|---|---|---|
| `combo_SWB_CONN13_high` / `_low` | **SWB CONN13 專用** | 每個 channel 依該板的軌給 3% 或 5% |
| `combo_SWB_CONN14_high` / `_low` | **SWB CONN14 專用** | 同上 |
| `combo_SWB_CONN15_high` / `_low` | **SWB CONN15 專用** | 同上 |
| `combo_SWB_CONN16_high` / `_low` | **SWB CONN16 專用** | 同上 |
| `combo_high3` / `combo_low3` | 通用 | 全部 channel ±3% |
| `combo_high5` / `combo_low5` | 通用 | 全部 channel ±5% |
| `combo_normal` | 通用 | 全部回 nominal |
| `all_off` | 通用 | 全部 OPERATION off |
SWB0 和 SWB1 的同號 CONN 共用同一個 profile（兩片板的軌完全相同，
只差 I2C bus）。CB CONN13 沒有專屬 profile，用通用的 `combo_high3` / `combo_low3`。
## Operation 對應
| 參數 | PMBus 0x01 值 | 說明 |
src/Script_ABC_Blanton/Blanton_Script/LTC2980_Margin_Script/profiles/comboA.conf
-22
View File
@@ -1,22 +0,0 @@
# Profile: comboA - alternating high/low (even=high, odd=low)
# Applied to whichever LTC2980 is currently loaded via margin_init
# Format: "channel:operation:change_percent"
PROFILE_CHANNELS=(
"0:high:8"
"1:low:8"
"2:high:8"
"3:low:8"
"4:high:8"
"5:low:8"
"6:high:8"
"7:low:8"
"8:high:8"
"9:low:8"
"10:high:8"
"11:low:8"
"12:high:8"
"13:low:8"
"14:high:8"
"15:low:8"
)
src/Script_ABC_Blanton/Blanton_Script/LTC2980_Margin_Script/profiles/comboA_CB.conf
+26
View File
@@ -0,0 +1,26 @@
# Profile: comboA_CB - checkerboard, the complement of comboB_CB
# Board: CB only. The channel list is positional, so applying this to a
# different board margins the wrong rails and nothing detects it.
# Run comboA then comboB to cover every rail in both directions while its
# neighbours sit the other way.
# Applied to whichever LTC2980 is currently loaded via margin_init
# Format: "channel:operation:change_percent"
PROFILE_CHANNELS=(
"0:low:5"
"1:low:5"
"2:high:5"
"3:low:5"
"4:high:5"
"5:high:5"
"6:high:5"
"7:high:5"
"8:low:5"
"9:high:5"
"10:high:5"
"11:high:5"
"12:low:5"
"13:high:5"
"14:high:5"
"15:low:5"
)
src/Script_ABC_Blanton/Blanton_Script/LTC2980_Margin_Script/profiles/comboA_SWB_CONN13.conf
+26
View File
@@ -0,0 +1,26 @@
# Profile: comboA_SWB_CONN13 - checkerboard, the complement of comboB_SWB_CONN13
# Board: SWB_CONN13 only. The channel list is positional, so applying this to a
# different board margins the wrong rails and nothing detects it.
# Run comboA then comboB to cover every rail in both directions while its
# neighbours sit the other way.
# Applied to whichever LTC2980 is currently loaded via margin_init
# Format: "channel:operation:change_percent"
PROFILE_CHANNELS=(
"0:high:3"
"1:high:3"
"2:low:3"
"3:low:3"
"4:high:5"
"5:low:5"
"6:high:5"
"7:high:5"
"8:high:5"
"9:high:3"
"10:high:3"
"11:low:3"
"12:low:3"
"13:high:3"
"14:high:3"
"15:low:5"
)
src/Script_ABC_Blanton/Blanton_Script/LTC2980_Margin_Script/profiles/comboA_SWB_CONN14.conf
+28
View File
@@ -0,0 +1,28 @@
# Profile: comboA_SWB_CONN14 - checkerboard, the complement of comboB_SWB_CONN14
# Board: SWB_CONN14 only. The channel list is positional, so applying this to a
# different board margins the wrong rails and nothing detects it.
# Run comboA then comboB to cover every rail in both directions while its
# neighbours sit the other way.
# CH 10, 11, 13 stay nominal: they are NC on this board, so there is
# nothing to margin.
# Applied to whichever LTC2980 is currently loaded via margin_init
# Format: "channel:operation:change_percent"
PROFILE_CHANNELS=(
"0:high:3"
"1:low:3"
"2:low:3"
"3:high:5"
"4:high:5"
"5:high:5"
"6:low:5"
"7:low:5"
"8:low:3"
"9:low:3"
"10:nominal:5"
"11:nominal:5"
"12:high:3"
"13:nominal:5"
"14:high:5"
"15:high:3"
)
src/Script_ABC_Blanton/Blanton_Script/LTC2980_Margin_Script/profiles/comboA_SWB_CONN15.conf
+28
View File
@@ -0,0 +1,28 @@
# Profile: comboA_SWB_CONN15 - checkerboard, the complement of comboB_SWB_CONN15
# Board: SWB_CONN15 only. The channel list is positional, so applying this to a
# different board margins the wrong rails and nothing detects it.
# Run comboA then comboB to cover every rail in both directions while its
# neighbours sit the other way.
# CH 10 stay nominal: they are NC on this board, so there is
# nothing to margin.
# Applied to whichever LTC2980 is currently loaded via margin_init
# Format: "channel:operation:change_percent"
PROFILE_CHANNELS=(
"0:low:3"
"1:low:3"
"2:high:3"
"3:high:3"
"4:low:3"
"5:low:3"
"6:high:5"
"7:high:3"
"8:high:5"
"9:low:5"
"10:nominal:5"
"11:low:5"
"12:low:3"
"13:high:3"
"14:high:3"
"15:high:5"
)
src/Script_ABC_Blanton/Blanton_Script/LTC2980_Margin_Script/profiles/comboA_SWB_CONN16.conf
+26
View File
@@ -0,0 +1,26 @@
# Profile: comboA_SWB_CONN16 - checkerboard, the complement of comboB_SWB_CONN16
# Board: SWB_CONN16 only. The channel list is positional, so applying this to a
# different board margins the wrong rails and nothing detects it.
# Run comboA then comboB to cover every rail in both directions while its
# neighbours sit the other way.
# Applied to whichever LTC2980 is currently loaded via margin_init
# Format: "channel:operation:change_percent"
PROFILE_CHANNELS=(
"0:high:3"
"1:high:5"
"2:high:5"
"3:low:5"
"4:high:5"
"5:low:5"
"6:high:5"
"7:high:3"
"8:high:3"
"9:high:3"
"10:low:3"
"11:low:3"
"12:low:3"
"13:low:3"
"14:low:3"
"15:high:3"
)
src/Script_ABC_Blanton/Blanton_Script/LTC2980_Margin_Script/profiles/comboB.conf
-22
View File
@@ -1,22 +0,0 @@
# Profile: comboB - inverse of comboA (even=low, odd=high)
# Applied to whichever LTC2980 is currently loaded via margin_init
# Format: "channel:operation:change_percent"
PROFILE_CHANNELS=(
"0:low:8"
"1:high:8"
"2:low:8"
"3:high:8"
"4:low:8"
"5:high:8"
"6:low:8"
"7:high:8"
"8:low:8"
"9:high:8"
"10:low:8"
"11:high:8"
"12:low:8"
"13:high:8"
"14:low:8"
"15:high:8"
)
src/Script_ABC_Blanton/Blanton_Script/LTC2980_Margin_Script/profiles/comboB_CB.conf
+26
View File
@@ -0,0 +1,26 @@
# Profile: comboB_CB - checkerboard, the complement of comboA_CB
# Board: CB only. The channel list is positional, so applying this to a
# different board margins the wrong rails and nothing detects it.
# Run comboB then comboA to cover every rail in both directions while its
# neighbours sit the other way.
# Applied to whichever LTC2980 is currently loaded via margin_init
# Format: "channel:operation:change_percent"
PROFILE_CHANNELS=(
"0:high:5"
"1:high:5"
"2:low:5"
"3:high:5"
"4:low:5"
"5:low:5"
"6:low:5"
"7:low:5"
"8:high:5"
"9:low:5"
"10:low:5"
"11:low:5"
"12:high:5"
"13:low:5"
"14:low:5"
"15:high:5"
)
src/Script_ABC_Blanton/Blanton_Script/LTC2980_Margin_Script/profiles/comboB_SWB_CONN13.conf
+26
View File
@@ -0,0 +1,26 @@
# Profile: comboB_SWB_CONN13 - checkerboard, the complement of comboA_SWB_CONN13
# Board: SWB_CONN13 only. The channel list is positional, so applying this to a
# different board margins the wrong rails and nothing detects it.
# Run comboB then comboA to cover every rail in both directions while its
# neighbours sit the other way.
# Applied to whichever LTC2980 is currently loaded via margin_init
# Format: "channel:operation:change_percent"
PROFILE_CHANNELS=(
"0:low:3"
"1:low:3"
"2:high:3"
"3:high:3"
"4:low:5"
"5:high:5"
"6:low:5"
"7:low:5"
"8:low:5"
"9:low:3"
"10:low:3"
"11:high:3"
"12:high:3"
"13:low:3"
"14:low:3"
"15:high:5"
)
src/Script_ABC_Blanton/Blanton_Script/LTC2980_Margin_Script/profiles/comboB_SWB_CONN14.conf
+28
View File
@@ -0,0 +1,28 @@
# Profile: comboB_SWB_CONN14 - checkerboard, the complement of comboA_SWB_CONN14
# Board: SWB_CONN14 only. The channel list is positional, so applying this to a
# different board margins the wrong rails and nothing detects it.
# Run comboB then comboA to cover every rail in both directions while its
# neighbours sit the other way.
# CH 10, 11, 13 stay nominal: they are NC on this board, so there is
# nothing to margin.
# Applied to whichever LTC2980 is currently loaded via margin_init
# Format: "channel:operation:change_percent"
PROFILE_CHANNELS=(
"0:low:3"
"1:high:3"
"2:high:3"
"3:low:5"
"4:low:5"
"5:low:5"
"6:high:5"
"7:high:5"
"8:high:3"
"9:high:3"
"10:nominal:5"
"11:nominal:5"
"12:low:3"
"13:nominal:5"
"14:low:5"
"15:low:3"
)
src/Script_ABC_Blanton/Blanton_Script/LTC2980_Margin_Script/profiles/comboB_SWB_CONN15.conf
+28
View File
@@ -0,0 +1,28 @@
# Profile: comboB_SWB_CONN15 - checkerboard, the complement of comboA_SWB_CONN15
# Board: SWB_CONN15 only. The channel list is positional, so applying this to a
# different board margins the wrong rails and nothing detects it.
# Run comboB then comboA to cover every rail in both directions while its
# neighbours sit the other way.
# CH 10 stay nominal: they are NC on this board, so there is
# nothing to margin.
# Applied to whichever LTC2980 is currently loaded via margin_init
# Format: "channel:operation:change_percent"
PROFILE_CHANNELS=(
"0:high:3"
"1:high:3"
"2:low:3"
"3:low:3"
"4:high:3"
"5:high:3"
"6:low:5"
"7:low:3"
"8:low:5"
"9:high:5"
"10:nominal:5"
"11:high:5"
"12:high:3"
"13:low:3"
"14:low:3"
"15:low:5"
)
src/Script_ABC_Blanton/Blanton_Script/LTC2980_Margin_Script/profiles/comboB_SWB_CONN16.conf
+26
View File
@@ -0,0 +1,26 @@
# Profile: comboB_SWB_CONN16 - checkerboard, the complement of comboA_SWB_CONN16
# Board: SWB_CONN16 only. The channel list is positional, so applying this to a
# different board margins the wrong rails and nothing detects it.
# Run comboB then comboA to cover every rail in both directions while its
# neighbours sit the other way.
# Applied to whichever LTC2980 is currently loaded via margin_init
# Format: "channel:operation:change_percent"
PROFILE_CHANNELS=(
"0:low:3"
"1:low:5"
"2:low:5"
"3:high:5"
"4:low:5"
"5:high:5"
"6:low:5"
"7:low:3"
"8:low:3"
"9:low:3"
"10:high:3"
"11:high:3"
"12:high:3"
"13:high:3"
"14:high:3"
"15:low:3"
)
src/Script_ABC_Blanton/Blanton_Script/LTC2980_Margin_Script/profiles/combo_SWB_CONN13_high.conf
+24
View File
@@ -0,0 +1,24 @@
# Profile: combo_SWB_CONN13_high - every channel margin HIGH, per-channel percentage
# For the SWB CONN13 board only: the percentages follow that board's
# rails, so applying it to a different CONN margins the wrong things.
# Applied to whichever LTC2980 is currently loaded via margin_init
# Format: "channel:operation:change_percent"
PROFILE_CHANNELS=(
"0:high:3"
"1:high:3"
"2:high:3"
"3:high:3"
"4:high:5"
"5:high:5"
"6:high:5"
"7:high:5"
"8:high:5"
"9:high:3"
"10:high:3"
"11:high:3"
"12:high:3"
"13:high:3"
"14:high:3"
"15:high:5"
)
src/Script_ABC_Blanton/Blanton_Script/LTC2980_Margin_Script/profiles/combo_SWB_CONN13_low.conf
+24
View File
@@ -0,0 +1,24 @@
# Profile: combo_SWB_CONN13_low - every channel margin LOW, per-channel percentage
# For the SWB CONN13 board only: the percentages follow that board's
# rails, so applying it to a different CONN margins the wrong things.
# Applied to whichever LTC2980 is currently loaded via margin_init
# Format: "channel:operation:change_percent"
PROFILE_CHANNELS=(
"0:low:3"
"1:low:3"
"2:low:3"
"3:low:3"
"4:low:5"
"5:low:5"
"6:low:5"
"7:low:5"
"8:low:5"
"9:low:3"
"10:low:3"
"11:low:3"
"12:low:3"
"13:low:3"
"14:low:3"
"15:low:5"
)
src/Script_ABC_Blanton/Blanton_Script/LTC2980_Margin_Script/profiles/combo_SWB_CONN14_high.conf
+24
View File
@@ -0,0 +1,24 @@
# Profile: combo_SWB_CONN14_high - every channel margin HIGH, per-channel percentage
# For the SWB CONN14 board only: the percentages follow that board's
# rails, so applying it to a different CONN margins the wrong things.
# Applied to whichever LTC2980 is currently loaded via margin_init
# Format: "channel:operation:change_percent"
PROFILE_CHANNELS=(
"0:high:3"
"1:high:3"
"2:high:3"
"3:high:5"
"4:high:5"
"5:high:5"
"6:high:5"
"7:high:5"
"8:high:3"
"9:high:3"
"10:nominal:5"
"11:nominal:5"
"12:high:3"
"13:nominal:5"
"14:high:5"
"15:high:3"
)
src/Script_ABC_Blanton/Blanton_Script/LTC2980_Margin_Script/profiles/combo_SWB_CONN14_low.conf
+24
View File
@@ -0,0 +1,24 @@
# Profile: combo_SWB_CONN14_low - every channel margin LOW, per-channel percentage
# For the SWB CONN14 board only: the percentages follow that board's
# rails, so applying it to a different CONN margins the wrong things.
# Applied to whichever LTC2980 is currently loaded via margin_init
# Format: "channel:operation:change_percent"
PROFILE_CHANNELS=(
"0:low:3"
"1:low:3"
"2:low:3"
"3:low:5"
"4:low:5"
"5:low:5"
"6:low:5"
"7:low:5"
"8:low:3"
"9:low:3"
"10:nominal:5"
"11:nominal:5"
"12:low:3"
"13:nominal:5"
"14:low:5"
"15:low:3"
)
src/Script_ABC_Blanton/Blanton_Script/LTC2980_Margin_Script/profiles/combo_SWB_CONN15_high.conf
+24
View File
@@ -0,0 +1,24 @@
# Profile: combo_SWB_CONN15_high - every channel margin HIGH, per-channel percentage
# For the SWB CONN15 board only: the percentages follow that board's
# rails, so applying it to a different CONN margins the wrong things.
# Applied to whichever LTC2980 is currently loaded via margin_init
# Format: "channel:operation:change_percent"
PROFILE_CHANNELS=(
"0:high:3"
"1:high:3"
"2:high:3"
"3:high:3"
"4:high:3"
"5:high:3"
"6:high:5"
"7:high:3"
"8:high:5"
"9:high:5"
"10:nominal:5"
"11:high:5"
"12:high:3"
"13:high:3"
"14:high:3"
"15:high:5"
)
src/Script_ABC_Blanton/Blanton_Script/LTC2980_Margin_Script/profiles/combo_SWB_CONN15_low.conf
+24
View File
@@ -0,0 +1,24 @@
# Profile: combo_SWB_CONN15_low - every channel margin LOW, per-channel percentage
# For the SWB CONN15 board only: the percentages follow that board's
# rails, so applying it to a different CONN margins the wrong things.
# Applied to whichever LTC2980 is currently loaded via margin_init
# Format: "channel:operation:change_percent"
PROFILE_CHANNELS=(
"0:low:3"
"1:low:3"
"2:low:3"
"3:low:3"
"4:low:3"
"5:low:3"
"6:low:5"
"7:low:3"
"8:low:5"
"9:low:5"
"10:nominal:5"
"11:low:5"
"12:low:3"
"13:low:3"
"14:low:3"
"15:low:5"
)
src/Script_ABC_Blanton/Blanton_Script/LTC2980_Margin_Script/profiles/combo_SWB_CONN16_high.conf
+24
View File
@@ -0,0 +1,24 @@
# Profile: combo_SWB_CONN16_high - every channel margin HIGH, per-channel percentage
# For the SWB CONN16 board only: the percentages follow that board's
# rails, so applying it to a different CONN margins the wrong things.
# Applied to whichever LTC2980 is currently loaded via margin_init
# Format: "channel:operation:change_percent"
PROFILE_CHANNELS=(
"0:high:3"
"1:high:5"
"2:high:5"
"3:high:5"
"4:high:5"
"5:high:5"
"6:high:5"
"7:high:3"
"8:high:3"
"9:high:3"
"10:high:3"
"11:high:3"
"12:high:3"
"13:high:3"
"14:high:3"
"15:high:3"
)
src/Script_ABC_Blanton/Blanton_Script/LTC2980_Margin_Script/profiles/combo_SWB_CONN16_low.conf
+24
View File
@@ -0,0 +1,24 @@
# Profile: combo_SWB_CONN16_low - every channel margin LOW, per-channel percentage
# For the SWB CONN16 board only: the percentages follow that board's
# rails, so applying it to a different CONN margins the wrong things.
# Applied to whichever LTC2980 is currently loaded via margin_init
# Format: "channel:operation:change_percent"
PROFILE_CHANNELS=(
"0:low:3"
"1:low:5"
"2:low:5"
"3:low:5"
"4:low:5"
"5:low:5"
"6:low:5"
"7:low:3"
"8:low:3"
"9:low:3"
"10:low:3"
"11:low:3"
"12:low:3"
"13:low:3"
"14:low:3"
"15:low:3"
)
src/Script_ABC_Blanton/Blanton_Script/LTC2980_Margin_Script/script/margin_apply_profile_all.sh
+17 -10
View File
@@ -17,17 +17,24 @@ BOARDS=(
"Blanton_SWB1_CONN16"
)
# 對應的 profile 名稱（不含路徑與 .conf 副檔名），預設全部 comboA
# 對應的 profile 名稱（不含路徑與 .conf 副檔名）。
#
# SWB 的 profile 是 per-CONN 的：百分比對應該片板子的軌，套到別的 CONN 會 margin
# 到錯的東西，所以這裡不能全部填同一個名字。
#
# 這份預設是 HIGH 那一輪；LOW 那一輪把下面的 _high 全換成 _low 再跑一次
# （或 sed -i 's/_high/_low/' 這個檔）。
# CB 沒有 per-CONN profile，沿用通用的 combo_high3 / combo_low3。
PROFILES=(
"comboA" # Blanton_CB_CONN13
"comboA" # Blanton_SWB0_CONN13
"comboA" # Blanton_SWB0_CONN14
"comboA" # Blanton_SWB0_CONN15
"comboA" # Blanton_SWB0_CONN16
"comboA" # Blanton_SWB1_CONN13
"comboA" # Blanton_SWB1_CONN14
"comboA" # Blanton_SWB1_CONN15
"comboA" # Blanton_SWB1_CONN16
"combo_high3" # Blanton_CB_CONN13 (低壓軌多，用通用 +3%)
"combo_SWB_CONN13_high" # Blanton_SWB0_CONN13
"combo_SWB_CONN14_high" # Blanton_SWB0_CONN14
"combo_SWB_CONN15_high" # Blanton_SWB0_CONN15
"combo_SWB_CONN16_high" # Blanton_SWB0_CONN16
"combo_SWB_CONN13_high" # Blanton_SWB1_CONN13
"combo_SWB_CONN14_high" # Blanton_SWB1_CONN14
"combo_SWB_CONN15_high" # Blanton_SWB1_CONN15
"combo_SWB_CONN16_high" # Blanton_SWB1_CONN16
)
# --- Source margin.sh if not already loaded ---
src/Script_ABC_Blanton/Blanton_Script/LTC2980_Margin_Script/settings/Blanton_CB_CONN13.conf
+2 -2
View File
@@ -41,7 +41,7 @@ CH3_VNOM="1.8"; CH3_NET="V1P8_ALW"
CH4_VNOM="1.1"; CH4_NET="PWR_APU_VDDIO_SUS"
CH5_VNOM="0.75"; CH5_NET="PWR_VDD_MISC_RUN"
CH6_VNOM="0.78"; CH6_NET="PWR_APU_VDD_MEM_RUN"
CH7_VNOM="0.8"; CH7_NET="V0P8_PHY2_DVDD"
CH7_VNOM="0.816"; CH7_NET="V0P8_PHY2_DVDD"
CH8_VNOM="0.8"; CH8_NET="V0P8_AVDD"
CH9_VNOM="0.8"; CH9_NET="V0P8_PHY"
CH10_VNOM="1.8"; CH10_NET="V1P8_FPGA"
@@ -49,4 +49,4 @@ CH11_VNOM="2.5"; CH11_NET="V2P5_FPGA"
CH12_VNOM="1.1"; CH12_NET="V1P1_FPGA"
CH13_VNOM="5.0"; CH13_NET="P5V_STBY"
CH14_VNOM="3.3"; CH14_NET="P3V3_STBY"
CH15_VNOM="0.8"; CH15_NET="V0P8_PHY2_AVDD"
CH15_VNOM="0.816"; CH15_NET="V0P8_PHY2_AVDD"
src/Script_ABC_Blanton/Blanton_Script/LTC2980_Margin_Script/settings/Blanton_SWB0_CONN13.conf
+10 -10
View File
@@ -35,18 +35,18 @@ CHIP_POST_CMD=(
# chip1: SWB0 (CONN13)
# ============================================================
CH0_VNOM="0.75"; CH0_NET="P0V75_DVDD_47"
CH1_VNOM="0.75"; CH1_NET="P0V75_AVDD_47"
CH2_VNOM="1.5"; CH2_NET="P1V5_AVDD_47"
CH3_VNOM="0.9"; CH3_NET="P0V9_AVDD_47"
CH4_VNOM="1.8"; CH4_NET="P1V8_1"
CH5_VNOM="3.3"; CH5_NET="PVDD3_3V_SYNTH_LDO_A3"
CH6_VNOM="3.3"; CH6_NET="PVDD3_3V_SYNTH_LDO_B1"
CH7_VNOM="1.8"; CH7_NET="P1V8_3"
CH1_VNOM="0.756"; CH1_NET="P0V75_AVDD_47"
CH2_VNOM="1.524"; CH2_NET="P1V5_AVDD_47"
CH3_VNOM="0.915"; CH3_NET="P0V9_AVDD_47"
CH4_VNOM="1.816"; CH4_NET="P1V8_1"
CH5_VNOM="3.38"; CH5_NET="PVDD3_3V_SYNTH_LDO_A3"
CH6_VNOM="3.38"; CH6_NET="PVDD3_3V_SYNTH_LDO_B1"
CH7_VNOM="1.816"; CH7_NET="P1V8_3"
CH8_VNOM="1.8"; CH8_NET="P1V8_DVDDIO_3"
CH9_VNOM="0.75"; CH9_NET="P0V75_DVDD_39"
CH10_VNOM="0.75"; CH10_NET="P0V75_AVDD_39"
CH11_VNOM="1.5"; CH11_NET="P1V5_AVDD_39"
CH12_VNOM="0.9"; CH12_NET="P0V9_AVDD_39"
CH10_VNOM="0.756"; CH10_NET="P0V75_AVDD_39"
CH11_VNOM="1.524"; CH11_NET="P1V5_AVDD_39"
CH12_VNOM="0.915"; CH12_NET="P0V9_AVDD_39"
CH13_VNOM="1.5"; CH13_NET="PVDD1V5_2"
CH14_VNOM="1.8"; CH14_NET="PVDD1V8_DUT"
CH15_VNOM="1.2"; CH15_NET="PVDD_MDIO"
src/Script_ABC_Blanton/Blanton_Script/LTC2980_Margin_Script/settings/Blanton_SWB0_CONN14.conf
+10 -10
View File
@@ -34,16 +34,16 @@ CHIP_POST_CMD=(
# ============================================================
# chip1: SWB0 (CONN14)
# ============================================================
CH0_VNOM="0.75"; CH0_NET="P0V75_AVDD_7"
CH1_VNOM="1.5"; CH1_NET="P1V5_AVDD_7"
CH2_VNOM="0.9"; CH2_NET="P0V9_AVDD_7"
CH3_VNOM="1.8"; CH3_NET="P1V8_5"
CH4_VNOM="1.8"; CH4_NET="P1V8_2"
CH5_VNOM="3.3"; CH5_NET="PVDD3_3V_SYNTH_LDO_B2"
CH6_VNOM="3.3"; CH6_NET="PVDD3_3V_SYNTH_LDO_A2"
CH7_VNOM="3.3"; CH7_NET="PVDD3_3V_SYNTH_LDO_A1"
CH8_VNOM="1.5"; CH8_NET="PVDD1V5_TSC"
CH9_VNOM="1.5"; CH9_NET="PVDD1V5_ANLG"
CH0_VNOM="0.756"; CH0_NET="P0V75_AVDD_7"
CH1_VNOM="1.524"; CH1_NET="P1V5_AVDD_7"
CH2_VNOM="0.915"; CH2_NET="P0V9_AVDD_7"
CH3_VNOM="1.816"; CH3_NET="P1V8_5"
CH4_VNOM="1.816"; CH4_NET="P1V8_2"
CH5_VNOM="3.38"; CH5_NET="PVDD3_3V_SYNTH_LDO_B2"
CH6_VNOM="3.38"; CH6_NET="PVDD3_3V_SYNTH_LDO_A2"
CH7_VNOM="3.38"; CH7_NET="PVDD3_3V_SYNTH_LDO_A1"
CH8_VNOM="1.516"; CH8_NET="PVDD1V5_TSC"
CH9_VNOM="1.516"; CH9_NET="PVDD1V5_ANLG"
CH10_VNOM="-"; CH10_NET="NC"
CH11_VNOM="-"; CH11_NET="NC"
CH12_VNOM="1.5"; CH12_NET="PVDD1V5_1"
src/Script_ABC_Blanton/Blanton_Script/LTC2980_Margin_Script/settings/Blanton_SWB0_CONN15.conf
+8 -8
View File
@@ -34,19 +34,19 @@ CHIP_POST_CMD=(
# ============================================================
# chip1: SWB0 (CONN15)
# ============================================================
CH0_VNOM="1.5"; CH0_NET="P1V5_AVDD_55"
CH1_VNOM="0.9"; CH1_NET="P0V9_AVDD_55"
CH0_VNOM="1.524"; CH0_NET="P1V5_AVDD_55"
CH1_VNOM="0.915"; CH1_NET="P0V9_AVDD_55"
CH2_VNOM="0.75"; CH2_NET="P0V75_DVDD_63"
CH3_VNOM="0.75"; CH3_NET="P0V75_AVDD_63"
CH4_VNOM="1.5"; CH4_NET="P1V5_AVDD_63"
CH5_VNOM="0.9"; CH5_NET="P0V9_AVDD_63"
CH6_VNOM="3.3"; CH6_NET="PVDD3_3V_SYNTH_LDO_B3"
CH3_VNOM="0.756"; CH3_NET="P0V75_AVDD_63"
CH4_VNOM="1.524"; CH4_NET="P1V5_AVDD_63"
CH5_VNOM="0.915"; CH5_NET="P0V9_AVDD_63"
CH6_VNOM="3.38"; CH6_NET="PVDD3_3V_SYNTH_LDO_B3"
CH7_VNOM="1.5"; CH7_NET="PVDD1V5_3"
CH8_VNOM="0.85"; CH8_NET="P0V85_STBY"
CH9_VNOM="1.8"; CH9_NET="P1V8_STBY"
CH10_VNOM="-"; CH10_NET="NC"
CH11_VNOM="3.3"; CH11_NET="P3V3_STBY"
CH12_VNOM="0.9"; CH12_NET="PVDD0V9_2"
CH12_VNOM="0.91"; CH12_NET="PVDD0V9_2"
CH13_VNOM="0.75"; CH13_NET="P0V75_DVDD_55"
CH14_VNOM="0.75"; CH14_NET="P0V75_AVDD_55"
CH14_VNOM="0.756"; CH14_NET="P0V75_AVDD_55"
CH15_VNOM="1.8"; CH15_NET="P1V8_DVDDIO_4"
src/Script_ABC_Blanton/Blanton_Script/LTC2980_Margin_Script/settings/Blanton_SWB0_CONN16.conf
+14 -14
View File
@@ -35,18 +35,18 @@ CHIP_POST_CMD=(
# chip1: SWB0 (CONN16)
# ============================================================
CH0_VNOM="1.5"; CH0_NET="PVDD1V5_0"
CH1_VNOM="1.8"; CH1_NET="P1V8_4"
CH2_VNOM="3.3"; CH2_NET="PVDD3_3V_SYNTH_LDO_B5"
CH3_VNOM="3.3"; CH3_NET="PVDD3_3V_SYNTH_LDO_A5"
CH4_VNOM="3.3"; CH4_NET="PVDD3_3V_SYNTH_LDO_B4"
CH5_VNOM="3.3"; CH5_NET="PVDD3_3V_SYNTH_LDO_A4"
CH6_VNOM="3.3"; CH6_NET="P3V3"
CH7_VNOM="0.8"; CH7_NET="PVDD0_8V_T3"
CH1_VNOM="1.816"; CH1_NET="P1V8_4"
CH2_VNOM="3.38"; CH2_NET="PVDD3_3V_SYNTH_LDO_B5"
CH3_VNOM="3.38"; CH3_NET="PVDD3_3V_SYNTH_LDO_A5"
CH4_VNOM="3.38"; CH4_NET="PVDD3_3V_SYNTH_LDO_B4"
CH5_VNOM="3.38"; CH5_NET="PVDD3_3V_SYNTH_LDO_A4"
CH6_VNOM="3.327"; CH6_NET="P3V3"
CH7_VNOM="0.82"; CH7_NET="PVDD0_8V_T3"
CH8_VNOM="0.75"; CH8_NET="P0V75_DVDD_1"
CH9_VNOM="0.75"; CH9_NET="P0V75_AVDD_1"
CH10_VNOM="1.5"; CH10_NET="P1V5_AVDD_1"
CH11_VNOM="0.9"; CH11_NET="P0V9_AVDD_1"
CH12_VNOM="0.9"; CH12_NET="PVDD0V9_0"
CH13_VNOM="0.9"; CH13_NET="PVDD0V9_1"
CH14_VNOM="0.9"; CH14_NET="PVDD0V9_3"
CH15_VNOM="1.2"; CH15_NET="PVDD1V2_T3"
CH9_VNOM="0.756"; CH9_NET="P0V75_AVDD_1"
CH10_VNOM="1.524"; CH10_NET="P1V5_AVDD_1"
CH11_VNOM="0.915"; CH11_NET="P0V9_AVDD_1"
CH12_VNOM="0.915"; CH12_NET="PVDD0V9_0"
CH13_VNOM="0.91"; CH13_NET="PVDD0V9_1"
CH14_VNOM="0.915"; CH14_NET="PVDD0V9_3"
CH15_VNOM="1.224"; CH15_NET="PVDD1V2_T3"
src/Script_ABC_Blanton/Blanton_Script/LTC2980_Margin_Script/settings/Blanton_SWB1_CONN13.conf
+10 -10
View File
@@ -35,18 +35,18 @@ CHIP_POST_CMD=(
# chip1: SWB1 (CONN13)
# ============================================================
CH0_VNOM="0.75"; CH0_NET="P0V75_DVDD_47"
CH1_VNOM="0.75"; CH1_NET="P0V75_AVDD_47"
CH2_VNOM="1.5"; CH2_NET="P1V5_AVDD_47"
CH3_VNOM="0.9"; CH3_NET="P0V9_AVDD_47"
CH4_VNOM="1.8"; CH4_NET="P1V8_1"
CH5_VNOM="3.3"; CH5_NET="PVDD3_3V_SYNTH_LDO_A3"
CH6_VNOM="3.3"; CH6_NET="PVDD3_3V_SYNTH_LDO_B1"
CH7_VNOM="1.8"; CH7_NET="P1V8_3"
CH1_VNOM="0.756"; CH1_NET="P0V75_AVDD_47"
CH2_VNOM="1.524"; CH2_NET="P1V5_AVDD_47"
CH3_VNOM="0.915"; CH3_NET="P0V9_AVDD_47"
CH4_VNOM="1.816"; CH4_NET="P1V8_1"
CH5_VNOM="3.38"; CH5_NET="PVDD3_3V_SYNTH_LDO_A3"
CH6_VNOM="3.38"; CH6_NET="PVDD3_3V_SYNTH_LDO_B1"
CH7_VNOM="1.816"; CH7_NET="P1V8_3"
CH8_VNOM="1.8"; CH8_NET="P1V8_DVDDIO_3"
CH9_VNOM="0.75"; CH9_NET="P0V75_DVDD_39"
CH10_VNOM="0.75"; CH10_NET="P0V75_AVDD_39"
CH11_VNOM="1.5"; CH11_NET="P1V5_AVDD_39"
CH12_VNOM="0.9"; CH12_NET="P0V9_AVDD_39"
CH10_VNOM="0.756"; CH10_NET="P0V75_AVDD_39"
CH11_VNOM="1.524"; CH11_NET="P1V5_AVDD_39"
CH12_VNOM="0.915"; CH12_NET="P0V9_AVDD_39"
CH13_VNOM="1.5"; CH13_NET="PVDD1V5_2"
CH14_VNOM="1.8"; CH14_NET="PVDD1V8_DUT"
CH15_VNOM="1.2"; CH15_NET="PVDD_MDIO"
src/Script_ABC_Blanton/Blanton_Script/LTC2980_Margin_Script/settings/Blanton_SWB1_CONN14.conf
+10 -10
View File
@@ -34,16 +34,16 @@ CHIP_POST_CMD=(
# ============================================================
# chip1: SWB1 (CONN14)
# ============================================================
CH0_VNOM="0.75"; CH0_NET="P0V75_AVDD_7"
CH1_VNOM="1.5"; CH1_NET="P1V5_AVDD_7"
CH2_VNOM="0.9"; CH2_NET="P0V9_AVDD_7"
CH3_VNOM="1.8"; CH3_NET="P1V8_5"
CH4_VNOM="1.8"; CH4_NET="P1V8_2"
CH5_VNOM="3.3"; CH5_NET="PVDD3_3V_SYNTH_LDO_B2"
CH6_VNOM="3.3"; CH6_NET="PVDD3_3V_SYNTH_LDO_A2"
CH7_VNOM="3.3"; CH7_NET="PVDD3_3V_SYNTH_LDO_A1"
CH8_VNOM="1.5"; CH8_NET="PVDD1V5_TSC"
CH9_VNOM="1.5"; CH9_NET="PVDD1V5_ANLG"
CH0_VNOM="0.756"; CH0_NET="P0V75_AVDD_7"
CH1_VNOM="1.524"; CH1_NET="P1V5_AVDD_7"
CH2_VNOM="0.915"; CH2_NET="P0V9_AVDD_7"
CH3_VNOM="1.816"; CH3_NET="P1V8_5"
CH4_VNOM="1.816"; CH4_NET="P1V8_2"
CH5_VNOM="3.38"; CH5_NET="PVDD3_3V_SYNTH_LDO_B2"
CH6_VNOM="3.38"; CH6_NET="PVDD3_3V_SYNTH_LDO_A2"
CH7_VNOM="3.38"; CH7_NET="PVDD3_3V_SYNTH_LDO_A1"
CH8_VNOM="1.516"; CH8_NET="PVDD1V5_TSC"
CH9_VNOM="1.516"; CH9_NET="PVDD1V5_ANLG"
CH10_VNOM="-"; CH10_NET="NC"
CH11_VNOM="-"; CH11_NET="NC"
CH12_VNOM="1.5"; CH12_NET="PVDD1V5_1"
src/Script_ABC_Blanton/Blanton_Script/LTC2980_Margin_Script/settings/Blanton_SWB1_CONN15.conf
+8 -8
View File
@@ -34,19 +34,19 @@ CHIP_POST_CMD=(
# ============================================================
# chip1: SWB1 (CONN15)
# ============================================================
CH0_VNOM="1.5"; CH0_NET="P1V5_AVDD_55"
CH1_VNOM="0.9"; CH1_NET="P0V9_AVDD_55"
CH0_VNOM="1.524"; CH0_NET="P1V5_AVDD_55"
CH1_VNOM="0.915"; CH1_NET="P0V9_AVDD_55"
CH2_VNOM="0.75"; CH2_NET="P0V75_DVDD_63"
CH3_VNOM="0.75"; CH3_NET="P0V75_AVDD_63"
CH4_VNOM="1.5"; CH4_NET="P1V5_AVDD_63"
CH5_VNOM="0.9"; CH5_NET="P0V9_AVDD_63"
CH6_VNOM="3.3"; CH6_NET="PVDD3_3V_SYNTH_LDO_B3"
CH3_VNOM="0.756"; CH3_NET="P0V75_AVDD_63"
CH4_VNOM="1.524"; CH4_NET="P1V5_AVDD_63"
CH5_VNOM="0.915"; CH5_NET="P0V9_AVDD_63"
CH6_VNOM="3.38"; CH6_NET="PVDD3_3V_SYNTH_LDO_B3"
CH7_VNOM="1.5"; CH7_NET="PVDD1V5_3"
CH8_VNOM="0.85"; CH8_NET="P0V85_STBY"
CH9_VNOM="1.8"; CH9_NET="P1V8_STBY"
CH10_VNOM="-"; CH10_NET="NC"
CH11_VNOM="3.3"; CH11_NET="P3V3_STBY"
CH12_VNOM="0.9"; CH12_NET="PVDD0V9_2"
CH12_VNOM="0.91"; CH12_NET="PVDD0V9_2"
CH13_VNOM="0.75"; CH13_NET="P0V75_DVDD_55"
CH14_VNOM="0.75"; CH14_NET="P0V75_AVDD_55"
CH14_VNOM="0.756"; CH14_NET="P0V75_AVDD_55"
CH15_VNOM="1.8"; CH15_NET="P1V8_DVDDIO_4"
src/Script_ABC_Blanton/Blanton_Script/LTC2980_Margin_Script/settings/Blanton_SWB1_CONN16.conf
+14 -14
View File
@@ -35,18 +35,18 @@ CHIP_POST_CMD=(
# chip1: SWB1 (CONN16)
# ============================================================
CH0_VNOM="1.5"; CH0_NET="PVDD1V5_0"
CH1_VNOM="1.8"; CH1_NET="P1V8_4"
CH2_VNOM="3.3"; CH2_NET="PVDD3_3V_SYNTH_LDO_B5"
CH3_VNOM="3.3"; CH3_NET="PVDD3_3V_SYNTH_LDO_A5"
CH4_VNOM="3.3"; CH4_NET="PVDD3_3V_SYNTH_LDO_B4"
CH5_VNOM="3.3"; CH5_NET="PVDD3_3V_SYNTH_LDO_A4"
CH6_VNOM="3.3"; CH6_NET="P3V3"
CH7_VNOM="0.8"; CH7_NET="PVDD0_8V_T3"
CH1_VNOM="1.816"; CH1_NET="P1V8_4"
CH2_VNOM="3.38"; CH2_NET="PVDD3_3V_SYNTH_LDO_B5"
CH3_VNOM="3.38"; CH3_NET="PVDD3_3V_SYNTH_LDO_A5"
CH4_VNOM="3.38"; CH4_NET="PVDD3_3V_SYNTH_LDO_B4"
CH5_VNOM="3.38"; CH5_NET="PVDD3_3V_SYNTH_LDO_A4"
CH6_VNOM="3.327"; CH6_NET="P3V3"
CH7_VNOM="0.82"; CH7_NET="PVDD0_8V_T3"
CH8_VNOM="0.75"; CH8_NET="P0V75_DVDD_1"
CH9_VNOM="0.75"; CH9_NET="P0V75_AVDD_1"
CH10_VNOM="1.5"; CH10_NET="P1V5_AVDD_1"
CH11_VNOM="0.9"; CH11_NET="P0V9_AVDD_1"
CH12_VNOM="0.9"; CH12_NET="PVDD0V9_0"
CH13_VNOM="0.9"; CH13_NET="PVDD0V9_1"
CH14_VNOM="0.9"; CH14_NET="PVDD0V9_3"
CH15_VNOM="1.2"; CH15_NET="PVDD1V2_T3"
CH9_VNOM="0.756"; CH9_NET="P0V75_AVDD_1"
CH10_VNOM="1.524"; CH10_NET="P1V5_AVDD_1"
CH11_VNOM="0.915"; CH11_NET="P0V9_AVDD_1"
CH12_VNOM="0.915"; CH12_NET="PVDD0V9_0"
CH13_VNOM="0.91"; CH13_NET="PVDD0V9_1"
CH14_VNOM="0.915"; CH14_NET="PVDD0V9_3"
CH15_VNOM="1.224"; CH15_NET="PVDD1V2_T3"
src/Script_ABC_Blanton/Blanton_Script/blanton_multiphase_margin.sh
+1250
View File
File diff suppressed because it is too large Load Diff
src/Script_ABC_Blanton/Blanton_Script/blanton_traffic_linespeed.sh
+38 -10
View File
@@ -6,7 +6,7 @@
# V0.1.0 2026-08-17 First version. Bash port of the three Tera Term macros
# utils/traffic_loopback_vlan_setting.ttl (VLAN 30..137,
# port pair cdN <-> cdN+32), utils/traffic_loopback_start.ttl
# (tx 100 length=512 VLantag=<vid>) and
# (tx <count> length=<len> VLantag=<vid>) and
# utils/traffic_loopback_vlan_remove.ttl.
# One DUT = two switch boards -> bcmcmd unit 0 and 1
# (bcmcmd -n <unit>), default both.
@@ -90,6 +90,16 @@
# With only one unit selected the summary reports
# UNDECIDED (exit 3) instead of guessing.
# TL_CE_ENABLE=0 restores the old cd-pairs-only behaviour.
# V0.7.0 2026-09-01 Change: tx bursts carry PatternRandom=yes and the defaults
# become tx 200 length=324 (were 100 / 512).
# Random payload keeps the bit pattern changing instead of
# repeating, which is what makes a marginal lane show up;
# a fixed pattern can sit on a benign sequence all run.
# TL_TX_RANDOM=no forces the fixed pattern, "" leaves the
# argument off entirely (pre-V0.7.0 wire format).
# NOTE: counters scale with count x length, so totals from
# before this build are not comparable - 200x324 moves
# about 27% more bytes per burst than 100x512.
# V0.6.0 2026-08-28 Add: ce0 traffic is now SUSTAINED, not a single burst.
# A cd pair keeps its packets circulating because they
# flood to the partner port; ce0 has no partner and a
@@ -142,6 +152,8 @@
# aliases: -tx | --tx
# -l|--length <n> tx packet length (default $TL_TX_LENGTH)
# aliases: -length | --len
# -r|--random <yes|no> tx PatternRandom (default $TL_TX_RANDOM;
# empty string omits the argument)
# -p|--ports <list|all> ps: port list ('all' = plain 'ps', every port)
# -T|--tolerance <n> report: allowed |delta| in packets (default 0;
# -T 1 absorbs the normal snapshot skew)
@@ -161,7 +173,8 @@
# -h|--help help
#
# Environment overrides:
# BCMCMD_CMD=bcmcmd TL_UNITS="0 1" TL_TX_COUNT=100 TL_TX_LENGTH=512
# BCMCMD_CMD=bcmcmd TL_UNITS="0 1" TL_TX_COUNT=200 TL_TX_LENGTH=324
# TL_TX_RANDOM=yes
# TL_PS_PORTS="1-24,40-96,..." TL_TOLERANCE=0 TL_LOG_DIR=/tmp
# DEBUG_MODE=1
#
@@ -173,8 +186,14 @@
# === Config ==================================================================
BCMCMD_CMD="${BCMCMD_CMD:-bcmcmd}"
TL_UNITS="${TL_UNITS:-0 1}" # one DUT = two switch boards (0 and 1)
TL_TX_COUNT="${TL_TX_COUNT:-100}"
TL_TX_LENGTH="${TL_TX_LENGTH:-512}"
TL_TX_COUNT="${TL_TX_COUNT:-200}"
TL_TX_LENGTH="${TL_TX_LENGTH:-324}"
# PatternRandom=yes|no is appended to every tx burst. Random payload exercises
# the SerDes with changing bit patterns instead of the repeating one a fixed
# pattern produces, which is what makes a marginal lane show up.
# Set to "" to leave the argument off entirely (pre-V0.7.0 behaviour).
TL_TX_RANDOM="${TL_TX_RANDOM:-yes}"
TL_DEFAULT_VLAN="${TL_DEFAULT_VLAN:-1}"
TL_DEFAULT_VLAN_PBM="${TL_DEFAULT_VLAN_PBM:-cd}"
@@ -515,17 +534,23 @@ traffic_linespeed_start() {
_tl_units_check || return 1
_tl_is_uint "$TL_TX_COUNT" || { _tl_err "tx count '$TL_TX_COUNT' is not a positive integer (-tx|-c <n>)"; return 1; }
_tl_is_uint "$TL_TX_LENGTH" || { _tl_err "tx length '$TL_TX_LENGTH' is not a positive integer (-length|-l <n>)"; return 1; }
local rnd=""
case "$TL_TX_RANDOM" in
yes|no) rnd=" PatternRandom=$TL_TX_RANDOM" ;;
"") rnd="" ;;
*) _tl_err "PatternRandom '$TL_TX_RANDOM' must be yes, no or empty (-r|--random)"; return 1 ;;
esac
local unit vid pa pb n fail
for unit in $TL_UNITS; do
n=0; fail=0
_tl_info "unit $unit: tx $TL_TX_COUNT length=$TL_TX_LENGTH per VLAN 30..137"
_tl_info "unit $unit: tx $TL_TX_COUNT length=$TL_TX_LENGTH${rnd} per VLAN 30..137"
while read -r vid pa pb <&3; do
[ -z "$vid" ] && continue
_tl_bcm_q "$unit" "tx $TL_TX_COUNT length=$TL_TX_LENGTH VLantag=$vid" || fail=$((fail+1))
_tl_bcm_q "$unit" "tx $TL_TX_COUNT length=$TL_TX_LENGTH VLantag=$vid${rnd}" || fail=$((fail+1))
n=$((n+1))
done 3<<< "$TL_PAIRS"
if [ "$TL_CE_ENABLE" = "1" ]; then
_tl_bcm_q "$unit" "tx $TL_TX_COUNT length=$TL_TX_LENGTH VLantag=$TL_CE_VLAN" || fail=$((fail+1))
_tl_bcm_q "$unit" "tx $TL_TX_COUNT length=$TL_TX_LENGTH VLantag=$TL_CE_VLAN${rnd}" || fail=$((fail+1))
n=$((n+1))
fi
if [ "$fail" -eq 0 ]; then
@@ -949,7 +974,7 @@ traffic_linespeed_run() {
blanton_traffic_linespeed_help() {
echo -e "\033[1mblanton_traffic_linespeed.sh - SWB loopback line-speed traffic (bcmcmd)\033[0m"
echo ""
echo -e " Units: \033[36m$TL_UNITS\033[0m tx: \033[36m$TL_TX_COUNT pkt x ${TL_TX_LENGTH}B\033[0m"
echo -e " Units: \033[36m$TL_UNITS\033[0m tx: \033[36m$TL_TX_COUNT pkt x ${TL_TX_LENGTH}B\033[0m PatternRandom: \033[36m${TL_TX_RANDOM:-（不加）}\033[0m"
echo -e " VLANs: 30..137 ($(_tl_pair_count) loopback pairs, cdN <-> cdN+32)"
[ "$TL_CE_ENABLE" = "1" ] && \
echo -e " 100G : VLAN \033[36m$TL_CE_VLAN\033[0m port \033[36m$TL_CE_PORT\033[0m mode=\033[36m$TL_CE_MODE\033[0m (cross = unit0.$TL_CE_PORT <-> unit1.$TL_CE_PORT cabled)"
@@ -958,7 +983,7 @@ blanton_traffic_linespeed_help() {
echo -e " \033[33minit\033[0m step 1 vlan remove 1 pbm=cd, vlan create/add each pair"
echo -e " \033[33mclear\033[0m step 2 clear c"
echo -e " \033[33mshow\033[0m step 3/6 show c (run before and after traffic)"
echo -e " \033[33mstart\033[0m step 4 tx <count> length=<len> VLantag=<vid> per VLAN"
echo -e " \033[33mstart\033[0m step 4 tx <count> length=<len> VLantag=<vid> [PatternRandom=<yes|no>] per VLAN"
echo -e " \033[33mstop\033[0m step 5 vlan remove <vid> pbm=<pair> [--destroy also destroys]"
[ "$TL_CE_ENABLE" = "1" ] && [ "$TL_CE_MIRROR" = "1" ] && \
echo -e " \033[33m^ also turns the $TL_CE_PORT mirror off -- without it the 100G loop keeps running\033[0m"
@@ -972,6 +997,7 @@ blanton_traffic_linespeed_help() {
echo -e " \033[33m-u|--unit\033[0m <0|1|all> bcmcmd unit(s); 'all' = 0 1 (default: $TL_UNITS)"
echo -e " \033[33m-c|--count|-tx\033[0m <n> tx packet count (default $TL_TX_COUNT)"
echo -e " \033[33m-l|--length|-length\033[0m <n> tx packet length (default $TL_TX_LENGTH)"
echo -e " \033[33m-r|--random\033[0m <yes|no> tx PatternRandom (default $TL_TX_RANDOM; \"\" 完全不加)"
echo -e " \033[33m-p|--ports\033[0m <list> ps port list, or 'all' for every port"
echo -e " \033[33m-T|--tolerance\033[0m <n> report: allowed |delta| pkts (default $TL_TOLERANCE; -T 1 = snapshot skew)"
echo -e " \033[33m-a|--all\033[0m report: kept for compatibility (all pairs are listed)"
@@ -995,7 +1021,8 @@ blanton_traffic_linespeed_help() {
echo -e " blanton_traffic_linespeed report -u 1 -q | grep -v PASS"
echo -e " blanton_traffic_linespeed report -f /tmp/showc_unit1_*.log -a"
echo -e " blanton_traffic_linespeed show -u 1 | grep -iE 'error|discard|drop'"
echo -e " blanton_traffic_linespeed start -u 0 -tx 100 -length 512"
echo -e " blanton_traffic_linespeed start -u 0 -tx 200 -length 324"
echo -e " blanton_traffic_linespeed start -r no # 固定樣式，不隨機"
echo -e " blanton_traffic_linespeed start -tx 100000 -length 9216 -d"
echo -e " blanton_traffic_linespeed stop --destroy"
echo ""
@@ -1019,6 +1046,7 @@ blanton_traffic_linespeed() {
shift 2 ;;
-c|--count|-tx|--tx) TL_TX_COUNT="$2"; shift 2 ;;
-l|-length|--length|--len) TL_TX_LENGTH="$2"; shift 2 ;;
-r|--random|-PatternRandom|--pattern-random) TL_TX_RANDOM="$2"; shift 2 ;;
-p|--ports) TL_PS_PORTS="$2"; shift 2 ;;
-T|--tolerance) TL_TOLERANCE="$2"; shift 2 ;;
-f|--file) TL_REPORT_FILE="$2"; shift 2 ;;
src/Script_ABC_Blanton/Blanton_Script/pwr_brick.sh
+241
View File
@@ -0,0 +1,241 @@
#!/usr/bin/env bash
# =============================================================================
# pwr_brick.sh -- PDB / CPB power brick Vin / Iin / Vout / Iout / Temp
# =============================================================================
# Version History:
# V1.1.0 2026-09-02 PAGE values and conversions taken from the ADPM12200
# datasheet instead of the bring-up spreadsheet.
# The spreadsheet wrote every PAGE in decimal but with an
# 0x prefix, so four of the five selected the wrong page:
# Vin PAGE 9 -> it said 0x00 (should be 0x09)
# Iin PAGE 10 -> it said 0x10 (should be 0x0A)
# Vout PAGE 2 -> it said 0x02 correct by luck
# Iout PAGE 14 -> it said 0x14 (should be 0x0E)
# Temp PAGE 18 -> it said 0x18 (should be 0x12)
# Only Vout worked, because 2 reads the same either way.
# That is why Iin/Iout answered 0xFFFF and Temp 0x0000.
# Conversions now use the datasheet DIRECT equation; the
# reverse-engineered BRICK_VIN_LSB is gone.
# V1.0.0 2026-09-02 First version.
# =============================================================================
#
# Path: CB FPGA F3 VI2C ch4 -> TCA954x mux 0x72 ch0 -> the bricks
#
# The four ADPM12200 modules put each measurement on its own PMBus PAGE, so a
# PAGE write has to precede every read. blanton_pwr_data.sh does not send one
# at all (its PDB table has page "-"), which is why it reports them as NA.
#
# READ_VIN 0x88 PAGE 9
# READ_IIN 0x89 PAGE 10
# READ_VOUT 0x8B PAGE 2
# READ_IOUT 0x8C PAGE 14
# READ_TEMPERATURE_1 0x8D PAGE 18
#
# DIRECT format, datasheet Table 3 ("PMBus Command Code Coefficients"):
#
# X = (1/m) x (Y x 10^-R - b) Y = the 2-byte two's complement word
#
# Voltage m=0.125 b=0 R=0 units mV -> X = Y x 8 mV
# Current m=0.25 b=0 R=2 units A -> X = Y x 0.04 A
# Temperature m=1 b=0 R=2 units degC -> X = Y x 0.01 degC
#
# Sanity check: READ_VOUT 0x05D4 = 1492 -> 1492 x 8 = 11936 mV, which is exactly
# what PDB_IBC_SWB1_A_VOUT reports in 'show platform voltage'.
#
# ⚠️ Table 3 does not list READ_VIN or READ_IIN. They are decoded here with the
# Voltage and Current coefficients respectively - reasonable, and consistent
# with a ~50 V input, but not stated by the datasheet. PB_VIN_M / PB_IIN_M
# below are where to change that if the part turns out to differ.
#
# ⚠️ CPB.PU37 (0x26) is a DIFFERENT part: no PAGE writes, and its own scaling
# (Vin 0.25 V, Vout 2^-11 V, Iout 0.5 A per count of the mantissa). Those
# three were confirmed against words this DUT returns.
#
# Usage:
# ./pwr_brick.sh show # the table
# ./pwr_brick.sh show -r # add the raw words
# ./pwr_brick.sh help
# =============================================================================
# --- User Configurable Section ----------------------------------------------
PB_CH="${PB_CH:-4}" # ICB VI2C channel
PB_MUX="${PB_MUX:-0x72}" # TCA954x address
PB_MUX_SEL="${PB_MUX_SEL:-0x01}" # control byte: bit0 = channel 0
PB_TRIES="${PB_TRIES:-8}" # reads per value before giving up
# PMBus PAGE per measurement (ADPM12200). Decimal page numbers written in hex.
PB_PAGE_VIN="${PB_PAGE_VIN:-0x09}" # 9
PB_PAGE_IIN="${PB_PAGE_IIN:-0x0A}" # 10
PB_PAGE_VOUT="${PB_PAGE_VOUT:-0x02}" # 2
PB_PAGE_IOUT="${PB_PAGE_IOUT:-0x0E}" # 14
PB_PAGE_TEMP="${PB_PAGE_TEMP:-0x12}" # 18
# DIRECT coefficients: m, R, and the divisor that takes the datasheet unit to
# the displayed unit (mV -> V is 1000; A and degC are already right).
PB_VOUT_M="${PB_VOUT_M:-0.125}"; PB_VOUT_R="${PB_VOUT_R:-0}"; PB_VOUT_DIV="${PB_VOUT_DIV:-1000}"
PB_VIN_M="${PB_VIN_M:-0.125}"; PB_VIN_R="${PB_VIN_R:-0}"; PB_VIN_DIV="${PB_VIN_DIV:-1000}"
PB_IOUT_M="${PB_IOUT_M:-0.25}"; PB_IOUT_R="${PB_IOUT_R:-2}"; PB_IOUT_DIV="${PB_IOUT_DIV:-1}"
PB_IIN_M="${PB_IIN_M:-0.25}"; PB_IIN_R="${PB_IIN_R:-2}"; PB_IIN_DIV="${PB_IIN_DIV:-1}"
PB_TEMP_M="${PB_TEMP_M:-1}"; PB_TEMP_R="${PB_TEMP_R:-2}"; PB_TEMP_DIV="${PB_TEMP_DIV:-1}"
# CPB.PU37 only (different part, no PAGE, mantissa-based)
CPB_VIN_LSB="${CPB_VIN_LSB:-0.25}" # V per count of the mantissa
CPB_IOUT_LSB="${CPB_IOUT_LSB:-0.5}" # A per count of the mantissa
# Plausibility windows. A decoded value outside its window is discarded and the
# read retried; this is what rejects the corrupted words this bus produces - a
# bad high byte turns 11.98 V into 32.00 V, which "reject 0xFFFF" never catches.
PB_VIN_LO="${PB_VIN_LO:-30}"; PB_VIN_HI="${PB_VIN_HI:-70}"
PB_VOUT_LO="${PB_VOUT_LO:-8}"; PB_VOUT_HI="${PB_VOUT_HI:-14}"
PB_IIN_LO="${PB_IIN_LO:-0}"; PB_IIN_HI="${PB_IIN_HI:-100}"
PB_IOUT_LO="${PB_IOUT_LO:-0}"; PB_IOUT_HI="${PB_IOUT_HI:-300}"
PB_TEMP_LO="${PB_TEMP_LO:-0}"; PB_TEMP_HI="${PB_TEMP_HI:-125}"
# All-ones and all-zeros are the two ways this bus says "nobody answered", and
# both can decode into a value that sits inside its window - 0x0000 on the
# temperature register reads as a perfectly plausible 0 C. Rejected as raw
# words, before any conversion, so no window has to be bent to catch them.
PB_REJECT_FFFF="${PB_REJECT_FFFF:-1}"
PB_REJECT_0000="${PB_REJECT_0000:-1}"
# "location:bricks:slave:netname:kind" kind = adpm (PAGE per read) | cpb
PB_DEVS=(
"SWB0.PU207:BRICKS1:0x62:P12V_SWB0_L:adpm"
"SWB0.PU13:BRICKS2:0x63:P12V_SWB0_L:adpm"
"SWB1.PU332:BRICKS1:0x60:P12V_SWB1_R:adpm"
"SWB1.PU85:BRICKS2:0x61:P12V_SWB1_R:adpm"
"CPB.PU37:BRICK:0x26:P12V_STBY:cpb"
)
# -----------------------------------------------------------------------------
PB_NA="NA"
PB_RAW=0
PB_DIR="$(cd "$(dirname "${BASH_SOURCE[0]}")" 2>/dev/null && pwd)"
_pb_err() { echo -e "[\033[31mERR \033[0m] $*" >&2; }
# --- backend -----------------------------------------------------------------
if ! declare -F vi2c_read >/dev/null 2>&1; then
if [ -r "$PB_DIR/blanton_icb_vi2c.sh" ]; then
# shellcheck source=/dev/null
source "$PB_DIR/blanton_icb_vi2c.sh" >/dev/null 2>&1
else
_pb_err "blanton_icb_vi2c.sh not found next to this script"; exit 1
fi
fi
declare -F vi2c_read >/dev/null 2>&1 || { _pb_err "vi2c_read() still undefined"; exit 1; }
# --- decoders ----------------------------------------------------------------
# DIRECT: X = (1/m) x (Y x 10^-R - b), b = 0. Y is two's complement, so a word
# above 0x7FFF is negative - that matters for temperature, not for the rails.
_pb_direct() {
awk -v w=$(( $1 )) -v m="$2" -v r="$3" -v d="$4" 'BEGIN{
if (w > 32767) w -= 65536
printf "%.3f", ((w * (10 ^ -r)) / m) / d
}'
}
# SLINEAR11 mantissa only (bits[10:0], two's complement) - CPB.PU37 path.
_pb_mant() { awk -v w=$(( $1 )) 'BEGIN{ m = w % 2048; if (m > 1023) m -= 2048; print m }'; }
_pb_mul() { awk -v a="$1" -v b="$2" 'BEGIN{ printf "%.3f", a * b }'; }
_pb_lin11() { awk -v w=$(( $1 )) 'BEGIN{ printf "%.4f", w * (2.0 ^ -11) }'; }
_pb_in() { awk -v x="$1" -v lo="$2" -v hi="$3" 'BEGIN{ exit !(x >= lo && x <= hi) }'; }
# _pb_word <slave> <page|-> <reg> -> "0xWWWW"
_pb_word() {
local slave="$1" page="$2" reg="$3" out
[ "$page" != "-" ] && vi2c_write "$PB_CH" "$slave" 0x00 "$page" >/dev/null 2>&1
out=$(vi2c_read "$PB_CH" "$slave" "$reg" 2 2>/dev/null \
| sed -n 's/.*\[0x\(..\) 0x\(..\)\].*/0x\2\1/p')
[ -n "$out" ] && echo "$out"
}
# _pb_val <slave> <page|-> <reg> <decoder> <a1> <a2> <a3> <lo> <hi>
# Retries until the decoded value lands inside the window; echoes "value raw".
_pb_val() {
local slave="$1" page="$2" reg="$3" dec="$4" a1="$5" a2="$6" a3="$7" lo="$8" hi="$9"
local i w v
for (( i = 0; i < PB_TRIES; i++ )); do
w=$(_pb_word "$slave" "$page" "$reg") || continue
[ -z "$w" ] && continue
[ "$PB_REJECT_FFFF" = "1" ] && [ "$(( w ))" -eq 65535 ] && continue
[ "$PB_REJECT_0000" = "1" ] && [ "$(( w ))" -eq 0 ] && continue
case "$dec" in
direct) v=$(_pb_direct "$w" "$a1" "$a2" "$a3") ;;
mant) v=$(_pb_mul "$(_pb_mant "$w")" "$a1") ;;
lin11) v=$(_pb_lin11 "$w") ;;
esac
_pb_in "$v" "$lo" "$hi" || continue
echo "$v $w"; return 0
done
echo "$PB_NA -"; return 1
}
_pb_mux_open() {
# The mux takes a bare control byte and vi2c_write always sends a register
# first, so passing 0x01 as both makes the part latch 0x01 either way.
vi2c_init "$PB_CH" >/dev/null 2>&1
vi2c_write "$PB_CH" "$PB_MUX" "$PB_MUX_SEL" "$PB_MUX_SEL" >/dev/null 2>&1
return 0
}
# --- show --------------------------------------------------------------------
pwr_brick_show() {
_pb_mux_open
echo "==== PDB / CPB power bricks (VI2C ch${PB_CH} -> mux ${PB_MUX} ch0) ===="
printf '%-3s %-12s %-8s %-7s %-14s %10s %10s %10s %10s %9s\n' \
"No." "Location" "Bricks" "SlaveID" "Netname" \
"Vin(V)" "Iin(A)" "Vout(V)" "Iout(A)" "Temp(C)"
printf '%s\n' "--------------------------------------------------------------------------------------------------------------"
local n=0 entry loc bk slave net kind vi ii vo io tp
for entry in "${PB_DEVS[@]}"; do
IFS=':' read -r loc bk slave net kind <<< "$entry"
n=$(( n + 1 ))
if [ "$kind" = "cpb" ]; then
vi=$(_pb_val "$slave" - 0x88 mant "$CPB_VIN_LSB" "" "" "$PB_VIN_LO" "$PB_VIN_HI")
ii="$PB_NA -" # no input current on this part
vo=$(_pb_val "$slave" - 0x8B lin11 "" "" "" "$PB_VOUT_LO" "$PB_VOUT_HI")
io=$(_pb_val "$slave" - 0x8C mant "$CPB_IOUT_LSB" "" "" "$PB_IOUT_LO" "$PB_IOUT_HI")
tp=$(_pb_val "$slave" - 0x8D direct 1 2 1 "$PB_TEMP_LO" "$PB_TEMP_HI")
else
vi=$(_pb_val "$slave" "$PB_PAGE_VIN" 0x88 direct "$PB_VIN_M" "$PB_VIN_R" "$PB_VIN_DIV" "$PB_VIN_LO" "$PB_VIN_HI")
ii=$(_pb_val "$slave" "$PB_PAGE_IIN" 0x89 direct "$PB_IIN_M" "$PB_IIN_R" "$PB_IIN_DIV" "$PB_IIN_LO" "$PB_IIN_HI")
vo=$(_pb_val "$slave" "$PB_PAGE_VOUT" 0x8B direct "$PB_VOUT_M" "$PB_VOUT_R" "$PB_VOUT_DIV" "$PB_VOUT_LO" "$PB_VOUT_HI")
io=$(_pb_val "$slave" "$PB_PAGE_IOUT" 0x8C direct "$PB_IOUT_M" "$PB_IOUT_R" "$PB_IOUT_DIV" "$PB_IOUT_LO" "$PB_IOUT_HI")
tp=$(_pb_val "$slave" "$PB_PAGE_TEMP" 0x8D direct "$PB_TEMP_M" "$PB_TEMP_R" "$PB_TEMP_DIV" "$PB_TEMP_LO" "$PB_TEMP_HI")
fi
printf '%-3s %-12s %-8s %-7s %-14s %10s %10s %10s %10s %9s\n' \
"$n" "$loc" "$bk" "$slave" "$net" \
"${vi%% *}" "${ii%% *}" "${vo%% *}" "${io%% *}" "${tp%% *}"
[ "$PB_RAW" = "1" ] && printf '%-3s %-12s %-8s %-7s %-14s %10s %10s %10s %10s %9s\n' \
"" "" "" "" "raw" "${vi##* }" "${ii##* }" "${vo##* }" "${io##* }" "${tp##* }"
done
# No trailing notes on stdout: this table gets pasted into reports and
# captured into the master console log, and a caveat printed every run stops
# being read after the second time. The caveats live in the file header -
# the one that still matters is that READ_VIN / READ_IIN are not in the
# datasheet coefficient table and borrow the Voltage / Current sets.
}
pwr_brick_help() {
echo -e "\033[1mpwr_brick.sh - PDB / CPB power brick readings\033[0m"
echo ""
echo -e " \033[33mshow\033[0m [-r] Vin / Iin / Vout / Iout / Temp for all 5 bricks (-r adds raw)"
echo -e " \033[33mhelp\033[0m"
echo ""
echo -e " Path : VI2C ch$PB_CH -> mux $PB_MUX ch0"
echo -e " The four ADPM12200 modules need a PMBus PAGE per measurement:"
echo -e " Vin $PB_PAGE_VIN(9) Iin $PB_PAGE_IIN(10) Vout $PB_PAGE_VOUT(2) Iout $PB_PAGE_IOUT(14) Temp $PB_PAGE_TEMP(18)"
echo -e " DIRECT format, datasheet Table 3: X = (1/m) x (Y x 10^-R - b)"
echo -e " CPB.PU37 (0x26) is a different part - no PAGE, its own scaling."
echo -e " \033[33mREAD_VIN / READ_IIN are not in Table 3; they borrow Voltage / Current.\033[0m"
}
case "${1:-help}" in
show)
shift 2>/dev/null
[ "${1:-}" = "-r" ] && PB_RAW=1
pwr_brick_show ;;
help|-h|--help) pwr_brick_help ;;
*) _pb_err "unknown sub-command: $1"; pwr_brick_help; exit 1 ;;
esac
src/Script_ABC_Blanton/config.ttl
+10
View File
@@ -6,6 +6,7 @@ strTestcase="ENV" ;ENV,EMC,Margin...etc
EN_Margin = 0 ; 1: Enable Margin Test, 0: Disable Margin Test
EN_log = 1 ; 1: Enable log, 0: Disable log
EN_timestamp = 1 ; 1: Enable timestamp in log, 0: Disable timestamp in log
;================================================================
; FAN_SPEED
@@ -17,6 +18,15 @@ FAN_SPEED = 100
SWB_UNIT0 = 1 ; 1 = this DUT has switch unit 0, wait for it ; 0 = skip
SWB_UNIT1 = 1 ; 1 = this DUT has switch unit 1, wait for it ; 0 = skip
;================================================================
; Stress_Test
;================================================================
SSD_RUNTIME = 3600 ; Unit seconds, 3600 = 1 hour
SSD_COUNT = 240 ; Total time = SSD_RUNTIME * SSD_COUNT
USB_RUNTIME = 3600 ; Unit seconds, 3600 = 1 hour
USB_COUNT = 240 ; Total time = USB_RUNTIME * USB_COUNT
BMC_USB_RUNTIME = 172800 ; Unit seconds, 172800 = 2 days
;================================================================
; Prompt Definitions
;================================================================
tools/Multiphase_Netname
+40
View File
@@ -0,0 +1,40 @@
SWB0_0V9_ANLG0
SWB0_0V9_ANLG1
SWB0_0V75_ANLG0
SWB0_0V75_ANLG1
SWB0_PHYTILE_P0
SWB0_PHYTILE_P1
SWB0_PHYTILE_P2
SWB0_PHYTILE_P3
SWB0_PHYTILE_P4
SWB0_PHYTILE_P5
SWB0_PHYTILE_P6
SWB0_PHYTILE_P7
SWB0_PVDD1V5_CNDR0
SWB0_PVDD1V5_CNDR1
SWB0_PVDDA_PHYT0
SWB0_PVDDA_PHYT1
SWB0_PVDDA_PHYT2
SWB0_PVDDA_PHYT3
SWB0_TH6_CORE
SWB1_0V9_ANLG0
SWB1_0V9_ANLG1
SWB1_0V75_ANLG0
SWB1_0V75_ANLG1
SWB1_PHYTILE_P0
SWB1_PHYTILE_P1
SWB1_PHYTILE_P2
SWB1_PHYTILE_P3
SWB1_PHYTILE_P4
SWB1_PHYTILE_P5
SWB1_PHYTILE_P6
SWB1_PHYTILE_P7
SWB1_PVDD1V5_CNDR0
SWB1_PVDD1V5_CNDR1
SWB1_PVDDA_PHYT0
SWB1_PVDDA_PHYT1
SWB1_PVDDA_PHYT2
SWB1_PVDDA_PHYT3
SWB1_TH6_CORE
tools/Multiphase_Normal.txt
+188
View File
@@ -0,0 +1,188 @@
//0.900V (nominal)
i2cset -f -y 13 0x25 0x00 0
i2ctransfer -f -y 13 w3@0x25 0x21 0x83 0x00
i2cset -f -y 13 0x25 0x00 2
i2ctransfer -f -y 13 w3@0x25 0x0D 0x74 0x10
//0.900V (nominal)
i2cset -f -y 15 0x26 0x00 0
i2ctransfer -f -y 15 w3@0x26 0x21 0x83 0x00
i2cset -f -y 15 0x26 0x00 2
i2ctransfer -f -y 15 w3@0x26 0x0D 0x74 0x10
//0.75V (nominal)
i2cset -f -y 13 0x25 0x00 1
i2ctransfer -f -y 13 w3@0x25 0x21 0x65 0x00
i2cset -f -y 13 0x25 0x00 2
i2ctransfer -f -y 13 w3@0x25 0x1D 0x5A 0x06
//0.75V (nominal)
i2cset -f -y 15 0x26 0x00 1
i2ctransfer -f -y 15 w3@0x26 0x21 0x65 0x00
i2cset -f -y 15 0x26 0x00 2
i2ctransfer -f -y 15 w3@0x26 0x1D 0x5A 0x06
//0.75V (nominal)
i2cset -f -y 13 0x21 0x00 0
i2ctransfer -f -y 13 w3@0x21 0x21 0x65 0x00
i2cset -f -y 13 0x21 0x00 2
i2ctransfer -f -y 13 w3@0x21 0x0D 0xB2 0x0C
//0.75V (nominal)
i2cset -f -y 13 0x21 0x00 1
i2ctransfer -f -y 13 w3@0x21 0x21 0x65 0x00
i2cset -f -y 13 0x21 0x00 2
i2ctransfer -f -y 13 w3@0x21 0x1D 0x5A 0x06
//0.75V (nominal)
i2cset -f -y 13 0x22 0x00 0
i2ctransfer -f -y 13 w3@0x22 0x21 0x65 0x00
i2cset -f -y 13 0x22 0x00 2
i2ctransfer -f -y 13 w3@0x22 0x0D 0xB2 0x0C
//0.75V (nominal)
i2cset -f -y 13 0x22 0x00 1
i2ctransfer -f -y 13 w3@0x22 0x21 0x65 0x00
i2cset -f -y 13 0x22 0x00 2
i2ctransfer -f -y 13 w3@0x22 0x1D 0x5A 0x06
//0.75V (nominal)
i2cset -f -y 15 0x23 0x00 0
i2ctransfer -f -y 15 w3@0x23 0x21 0x65 0x00
i2cset -f -y 15 0x23 0x00 2
i2ctransfer -f -y 15 w3@0x23 0x0D 0xB2 0x0C
//0.75V (nominal)
i2cset -f -y 15 0x23 0x00 1
i2ctransfer -f -y 15 w3@0x23 0x21 0x65 0x00
i2cset -f -y 15 0x23 0x00 2
i2ctransfer -f -y 15 w3@0x23 0x1D 0x5A 0x06
//0.75V (nominal)
i2cset -f -y 15 0x24 0x00 0
i2ctransfer -f -y 15 w3@0x24 0x21 0x65 0x00
i2cset -f -y 15 0x24 0x00 2
i2ctransfer -f -y 15 w3@0x24 0x0D 0xB2 0x0C
//0.75V (nominal)
i2cset -f -y 15 0x24 0x00 1
i2ctransfer -f -y 15 w3@0x24 0x21 0x65 0x00
i2cset -f -y 15 0x24 0x00 2
i2ctransfer -f -y 15 w3@0x24 0x1D 0x5A 0x06
//1.5V (nominal)
i2cset -f -y 13 0x29 0x00 0
i2ctransfer -f -y 13 w3@0x29 0x21 0xFB 0x00
i2cset -f -y 13 0x29 0x00 2
i2ctransfer -f -y 13 w3@0x29 0x0D 0x71 0x1F
//1.5V (nominal)
i2cset -f -y 13 0x29 0x00 1
i2ctransfer -f -y 13 w3@0x29 0x21 0xFB 0x00
i2cset -f -y 13 0x29 0x00 2
i2ctransfer -f -y 13 w3@0x29 0x1D 0xB9 0x0F
//0.720V
i2cset -f -y 13 0x27 0x00 0
i2ctransfer -f -y 13 w3@0x27 0x21 0x5F 0x00
i2cset -f -y 13 0x27 0x00 2
i2ctransfer -f -y 13 w3@0x27 0x0D 0xF4 0x0B
//0.720V
i2cset -f -y 13 0x27 0x00 1
i2ctransfer -f -y 13 w3@0x27 0x21 0x5F 0x00
i2cset -f -y 13 0x27 0x00 2
i2ctransfer -f -y 13 w3@0x27 0x1D 0xFC 0x05
//0.720V
i2cset -f -y 15 0x28 0x00 0
i2ctransfer -f -y 15 w3@0x28 0x21 0x5F 0x00
i2cset -f -y 15 0x28 0x00 2
i2ctransfer -f -y 15 w3@0x28 0x0D 0xF4 0x0B
//0.720V
i2cset -f -y 15 0x28 0x00 1
i2ctransfer -f -y 15 w3@0x28 0x21 0x5F 0x00
i2cset -f -y 15 0x28 0x00 2
i2ctransfer -f -y 15 w3@0x28 0x1D 0xFC 0x05
//0.8V(nominal) , 0.8591V with load line
i2cset -f -y 13 0x20 0x00 0
i2ctransfer -f -y 13 w3@0x20 0x21 0x57 0x01
//0.900V (nominal)
i2cset -f -y 14 0x25 0x00 0
i2ctransfer -f -y 14 w3@0x25 0x21 0x83 0x00
i2cset -f -y 14 0x25 0x00 2
i2ctransfer -f -y 14 w3@0x25 0x0D 0x74 0x10
//0.900V (nominal)
i2cset -f -y 16 0x26 0x00 0
i2ctransfer -f -y 16 w3@0x26 0x21 0x83 0x00
i2cset -f -y 16 0x26 0x00 2
i2ctransfer -f -y 16 w3@0x26 0x0D 0x74 0x10
//0.75V (nominal)
i2cset -f -y 14 0x25 0x00 1
i2ctransfer -f -y 14 w3@0x25 0x21 0x65 0x00
i2cset -f -y 14 0x25 0x00 2
i2ctransfer -f -y 14 w3@0x25 0x1D 0x5A 0x06
//0.75V (nominal)
i2cset -f -y 16 0x26 0x00 1
i2ctransfer -f -y 16 w3@0x26 0x21 0x65 0x00
i2cset -f -y 16 0x26 0x00 2
i2ctransfer -f -y 16 w3@0x26 0x1D 0x5A 0x06
//0.75V (nominal)
i2cset -f -y 14 0x21 0x00 0
i2ctransfer -f -y 14 w3@0x21 0x21 0x65 0x00
i2cset -f -y 14 0x21 0x00 2
i2ctransfer -f -y 14 w3@0x21 0x0D 0xB2 0x0C
//0.75V (nominal)
i2cset -f -y 14 0x21 0x00 1
i2ctransfer -f -y 14 w3@0x21 0x21 0x65 0x00
i2cset -f -y 14 0x21 0x00 2
i2ctransfer -f -y 14 w3@0x21 0x1D 0x5A 0x06
//0.75V (nominal)
i2cset -f -y 14 0x22 0x00 0
i2ctransfer -f -y 14 w3@0x22 0x21 0x65 0x00
i2cset -f -y 14 0x22 0x00 2
i2ctransfer -f -y 14 w3@0x22 0x0D 0xB2 0x0C
//0.75V (nominal)
i2cset -f -y 14 0x22 0x00 1
i2ctransfer -f -y 14 w3@0x22 0x21 0x65 0x00
i2cset -f -y 14 0x22 0x00 2
i2ctransfer -f -y 14 w3@0x22 0x1D 0x5A 0x06
//0.75V (nominal)
i2cset -f -y 16 0x23 0x00 0
i2ctransfer -f -y 16 w3@0x23 0x21 0x65 0x00
i2cset -f -y 16 0x23 0x00 2
i2ctransfer -f -y 16 w3@0x23 0x0D 0xB2 0x0C
//0.75V (nominal)
i2cset -f -y 16 0x23 0x00 1
i2ctransfer -f -y 16 w3@0x23 0x21 0x65 0x00
i2cset -f -y 16 0x23 0x00 2
i2ctransfer -f -y 16 w3@0x23 0x1D 0x5A 0x06
//0.75V (nominal)
i2cset -f -y 16 0x24 0x00 0
i2ctransfer -f -y 16 w3@0x24 0x21 0x65 0x00
i2cset -f -y 16 0x24 0x00 2
i2ctransfer -f -y 16 w3@0x24 0x0D 0xB2 0x0C
//0.75V (nominal)
i2cset -f -y 16 0x24 0x00 1
i2ctransfer -f -y 16 w3@0x24 0x21 0x65 0x00
i2cset -f -y 16 0x24 0x00 2
i2ctransfer -f -y 16 w3@0x24 0x1D 0x5A 0x06
//1.5V (nominal)
i2cset -f -y 14 0x29 0x00 0
i2ctransfer -f -y 14 w3@0x29 0x21 0xFB 0x00
i2cset -f -y 14 0x29 0x00 2
i2ctransfer -f -y 14 w3@0x29 0x0D 0x71 0x1F
//1.5V (nominal)
i2cset -f -y 14 0x29 0x00 1
i2ctransfer -f -y 14 w3@0x29 0x21 0xFB 0x00
i2cset -f -y 14 0x29 0x00 2
i2ctransfer -f -y 14 w3@0x29 0x1D 0xB9 0x0F
//0.720V (nominal)
i2cset -f -y 14 0x27 0x00 0
i2ctransfer -f -y 14 w3@0x27 0x21 0x5F 0x00
i2cset -f -y 14 0x27 0x00 2
i2ctransfer -f -y 14 w3@0x27 0x0D 0xF4 0x0B
//0.720V (nominal)
i2cset -f -y 14 0x27 0x00 1
i2ctransfer -f -y 14 w3@0x27 0x21 0x5F 0x00
i2cset -f -y 14 0x27 0x00 2
i2ctransfer -f -y 14 w3@0x27 0x1D 0xFC 0x05
//0.720V (nominal)
i2cset -f -y 16 0x28 0x00 0
i2ctransfer -f -y 16 w3@0x28 0x21 0x5F 0x00
i2cset -f -y 16 0x28 0x00 2
i2ctransfer -f -y 16 w3@0x28 0x0D 0xF4 0x0B
//0.720V (nominal)
i2cset -f -y 16 0x28 0x00 1
i2ctransfer -f -y 16 w3@0x28 0x21 0x5F 0x00
i2cset -f -y 16 0x28 0x00 2
i2ctransfer -f -y 16 w3@0x28 0x1D 0xFC 0x05
//0.8V(nominal) , 0.8591V with load line
i2cset -f -y 14 0x20 0x00 0
i2ctransfer -f -y 14 w3@0x20 0x21 0x57 0x01
tools/Multiphase_Save.txt
+48
View File
@@ -0,0 +1,48 @@
i2cset -f -y 13 0x25 0x00 0
i2cset -f -y 13 0x25 0x15
i2cset -f -y 15 0x26 0x00 0
i2cset -f -y 15 0x26 0x15
i2cset -f -y 13 0x25 0x00 0
i2cset -f -y 13 0x25 0x15
i2cset -f -y 15 0x26 0x00 0
i2cset -f -y 15 0x26 0x15
i2cset -f -y 13 0x21 0x00 0
i2cset -f -y 13 0x21 0x15
i2cset -f -y 13 0x22 0x00 0
i2cset -f -y 13 0x22 0x15
i2cset -f -y 15 0x23 0x00 0
i2cset -f -y 15 0x23 0x15
i2cset -f -y 15 0x24 0x00 0
i2cset -f -y 15 0x24 0x15
i2cset -f -y 13 0x29 0x00 0
i2cset -f -y 13 0x29 0x15
i2cset -f -y 13 0x27 0x00 0
i2cset -f -y 13 0x27 0x15
i2cset -f -y 15 0x28 0x00 0
i2cset -f -y 15 0x28 0x15
i2cset -f -y 13 0x20 0x00 0
i2cset -f -y 13 0x20 0x17
i2cset -f -y 14 0x25 0x00 0
i2cset -f -y 14 0x25 0x15
i2cset -f -y 16 0x26 0x00 0
i2cset -f -y 16 0x26 0x15
i2cset -f -y 14 0x25 0x00 0
i2cset -f -y 14 0x25 0x15
i2cset -f -y 16 0x26 0x00 0
i2cset -f -y 16 0x26 0x15
i2cset -f -y 14 0x21 0x00 0
i2cset -f -y 14 0x21 0x15
i2cset -f -y 14 0x22 0x00 0
i2cset -f -y 14 0x22 0x15
i2cset -f -y 16 0x23 0x00 0
i2cset -f -y 16 0x23 0x15
i2cset -f -y 16 0x24 0x00 0
i2cset -f -y 16 0x24 0x15
i2cset -f -y 14 0x29 0x00 0
i2cset -f -y 14 0x29 0x15
i2cset -f -y 14 0x27 0x00 0
i2cset -f -y 14 0x27 0x15
i2cset -f -y 16 0x28 0x00 0
i2cset -f -y 16 0x28 0x15
i2cset -f -y 14 0x20 0x00 0
i2cset -f -y 14 0x20 0x17
tools/Multiphase_comboA.txt
+188
View File
@@ -0,0 +1,188 @@
//0.930V
i2cset -f -y 13 0x25 0x00 0
i2ctransfer -f -y 13 w3@0x25 0x21 0x89 0x00
i2cset -f -y 13 0x25 0x00 2
i2ctransfer -f -y 13 w3@0x25 0x0D 0x34 0x11
//0.930V
i2cset -f -y 15 0x26 0x00 0
i2ctransfer -f -y 15 w3@0x26 0x21 0x89 0x00
i2cset -f -y 15 0x26 0x00 2
i2ctransfer -f -y 15 w3@0x26 0x0D 0x34 0x11
//0.725V
i2cset -f -y 13 0x25 0x00 1
i2ctransfer -f -y 13 w3@0x25 0x21 0x60 0x00
i2cset -f -y 13 0x25 0x00 2
i2ctransfer -f -y 13 w3@0x25 0x1D 0x0A 0x06
//0.725V
i2cset -f -y 15 0x26 0x00 1
i2ctransfer -f -y 15 w3@0x26 0x21 0x60 0x00
i2cset -f -y 15 0x26 0x00 2
i2ctransfer -f -y 15 w3@0x26 0x1D 0x0A 0x06
//0.725V
i2cset -f -y 13 0x21 0x00 0
i2ctransfer -f -y 13 w3@0x21 0x21 0x60 0x00
i2cset -f -y 13 0x21 0x00 2
i2ctransfer -f -y 13 w3@0x21 0x0D 0x12 0x0C
//0.725V
i2cset -f -y 13 0x21 0x00 1
i2ctransfer -f -y 13 w3@0x21 0x21 0x60 0x00
i2cset -f -y 13 0x21 0x00 2
i2ctransfer -f -y 13 w3@0x21 0x1D 0x0A 0x06
//0.725V
i2cset -f -y 13 0x22 0x00 0
i2ctransfer -f -y 13 w3@0x22 0x21 0x60 0x00
i2cset -f -y 13 0x22 0x00 2
i2ctransfer -f -y 13 w3@0x22 0x0D 0x12 0x0C
//0.725V
i2cset -f -y 13 0x22 0x00 1
i2ctransfer -f -y 13 w3@0x22 0x21 0x60 0x00
i2cset -f -y 13 0x22 0x00 2
i2ctransfer -f -y 13 w3@0x22 0x1D 0x0A 0x06
//0.725V
i2cset -f -y 15 0x23 0x00 0
i2ctransfer -f -y 15 w3@0x23 0x21 0x60 0x00
i2cset -f -y 15 0x23 0x00 2
i2ctransfer -f -y 15 w3@0x23 0x0D 0x12 0x0C
//0.725V
i2cset -f -y 15 0x23 0x00 1
i2ctransfer -f -y 15 w3@0x23 0x21 0x60 0x00
i2cset -f -y 15 0x23 0x00 2
i2ctransfer -f -y 15 w3@0x23 0x1D 0x0A 0x06
//0.725V
i2cset -f -y 15 0x24 0x00 0
i2ctransfer -f -y 15 w3@0x24 0x21 0x60 0x00
i2cset -f -y 15 0x24 0x00 2
i2ctransfer -f -y 15 w3@0x24 0x0D 0x12 0x0C
//0.725V
i2cset -f -y 15 0x24 0x00 1
i2ctransfer -f -y 15 w3@0x24 0x21 0x60 0x00
i2cset -f -y 15 0x24 0x00 2
i2ctransfer -f -y 15 w3@0x24 0x1D 0x0A 0x06
//1.545V
i2cset -f -y 13 0x29 0x00 0
i2ctransfer -f -y 13 w3@0x29 0x21 0x04 0x01
i2cset -f -y 13 0x29 0x00 2
i2ctransfer -f -y 13 w3@0x29 0x0D 0x91 0x20
//1.545V
i2cset -f -y 13 0x29 0x00 1
i2ctransfer -f -y 13 w3@0x29 0x21 0x04 0x01
i2cset -f -y 13 0x29 0x00 2
i2ctransfer -f -y 13 w3@0x29 0x1D 0x49 0x10
//0.745V
i2cset -f -y 13 0x27 0x00 0
i2ctransfer -f -y 13 w3@0x27 0x21 0x64 0x00
i2cset -f -y 13 0x27 0x00 2
i2ctransfer -f -y 13 w3@0x27 0x0D 0x94 0x0C
//0.745V
i2cset -f -y 13 0x27 0x00 1
i2ctransfer -f -y 13 w3@0x27 0x21 0x64 0x00
i2cset -f -y 13 0x27 0x00 2
i2ctransfer -f -y 13 w3@0x27 0x1D 0x4C 0x06
//0.745V
i2cset -f -y 15 0x28 0x00 0
i2ctransfer -f -y 15 w3@0x28 0x21 0x64 0x00
i2cset -f -y 15 0x28 0x00 2
i2ctransfer -f -y 15 w3@0x28 0x0D 0x94 0x0C
//0.745V
i2cset -f -y 15 0x28 0x00 1
i2ctransfer -f -y 15 w3@0x28 0x21 0x64 0x00
i2cset -f -y 15 0x28 0x00 2
i2ctransfer -f -y 15 w3@0x28 0x1D 0x4C 0x06
//0.885V
i2cset -f -y 13 0x20 0x00 0
i2ctransfer -f -y 13 w3@0x20 0x21 0x62 0x01
//0.930V
i2cset -f -y 14 0x25 0x00 0
i2ctransfer -f -y 14 w3@0x25 0x21 0x89 0x00
i2cset -f -y 14 0x25 0x00 2
i2ctransfer -f -y 14 w3@0x25 0x0D 0x34 0x11
//0.930V
i2cset -f -y 16 0x26 0x00 0
i2ctransfer -f -y 16 w3@0x26 0x21 0x89 0x00
i2cset -f -y 16 0x26 0x00 2
i2ctransfer -f -y 16 w3@0x26 0x0D 0x34 0x11
//0.725V
i2cset -f -y 14 0x25 0x00 1
i2ctransfer -f -y 14 w3@0x25 0x21 0x60 0x00
i2cset -f -y 14 0x25 0x00 2
i2ctransfer -f -y 14 w3@0x25 0x1D 0x0A 0x06
//0.725V
i2cset -f -y 16 0x26 0x00 1
i2ctransfer -f -y 16 w3@0x26 0x21 0x60 0x00
i2cset -f -y 16 0x26 0x00 2
i2ctransfer -f -y 16 w3@0x26 0x1D 0x0A 0x06
//0.725V
i2cset -f -y 14 0x21 0x00 0
i2ctransfer -f -y 14 w3@0x21 0x21 0x60 0x00
i2cset -f -y 14 0x21 0x00 2
i2ctransfer -f -y 14 w3@0x21 0x0D 0x12 0x0C
//0.725V
i2cset -f -y 14 0x21 0x00 1
i2ctransfer -f -y 14 w3@0x21 0x21 0x60 0x00
i2cset -f -y 14 0x21 0x00 2
i2ctransfer -f -y 14 w3@0x21 0x1D 0x0A 0x06
//0.725V
i2cset -f -y 14 0x22 0x00 0
i2ctransfer -f -y 14 w3@0x22 0x21 0x60 0x00
i2cset -f -y 14 0x22 0x00 2
i2ctransfer -f -y 14 w3@0x22 0x0D 0x12 0x0C
//0.725V
i2cset -f -y 14 0x22 0x00 1
i2ctransfer -f -y 14 w3@0x22 0x21 0x60 0x00
i2cset -f -y 14 0x22 0x00 2
i2ctransfer -f -y 14 w3@0x22 0x1D 0x0A 0x06
//0.725V
i2cset -f -y 16 0x23 0x00 0
i2ctransfer -f -y 16 w3@0x23 0x21 0x60 0x00
i2cset -f -y 16 0x23 0x00 2
i2ctransfer -f -y 16 w3@0x23 0x0D 0x12 0x0C
//0.725V
i2cset -f -y 16 0x23 0x00 1
i2ctransfer -f -y 16 w3@0x23 0x21 0x60 0x00
i2cset -f -y 16 0x23 0x00 2
i2ctransfer -f -y 16 w3@0x23 0x1D 0x0A 0x06
//0.725V
i2cset -f -y 16 0x24 0x00 0
i2ctransfer -f -y 16 w3@0x24 0x21 0x60 0x00
i2cset -f -y 16 0x24 0x00 2
i2ctransfer -f -y 16 w3@0x24 0x0D 0x12 0x0C
//0.725V
i2cset -f -y 16 0x24 0x00 1
i2ctransfer -f -y 16 w3@0x24 0x21 0x60 0x00
i2cset -f -y 16 0x24 0x00 2
i2ctransfer -f -y 16 w3@0x24 0x1D 0x0A 0x06
//1.545V
i2cset -f -y 14 0x29 0x00 0
i2ctransfer -f -y 14 w3@0x29 0x21 0x04 0x01
i2cset -f -y 14 0x29 0x00 2
i2ctransfer -f -y 14 w3@0x29 0x0D 0x91 0x20
//1.545V
i2cset -f -y 14 0x29 0x00 1
i2ctransfer -f -y 14 w3@0x29 0x21 0x04 0x01
i2cset -f -y 14 0x29 0x00 2
i2ctransfer -f -y 14 w3@0x29 0x1D 0x49 0x10
//0.745V
i2cset -f -y 14 0x27 0x00 0
i2ctransfer -f -y 14 w3@0x27 0x21 0x64 0x00
i2cset -f -y 14 0x27 0x00 2
i2ctransfer -f -y 14 w3@0x27 0x0D 0x94 0x0C
//0.745V
i2cset -f -y 14 0x27 0x00 1
i2ctransfer -f -y 14 w3@0x27 0x21 0x64 0x00
i2cset -f -y 14 0x27 0x00 2
i2ctransfer -f -y 14 w3@0x27 0x1D 0x4C 0x06
//0.745V
i2cset -f -y 16 0x28 0x00 0
i2ctransfer -f -y 16 w3@0x28 0x21 0x64 0x00
i2cset -f -y 16 0x28 0x00 2
i2ctransfer -f -y 16 w3@0x28 0x0D 0x94 0x0C
//0.745V
i2cset -f -y 16 0x28 0x00 1
i2ctransfer -f -y 16 w3@0x28 0x21 0x64 0x00
i2cset -f -y 16 0x28 0x00 2
i2ctransfer -f -y 16 w3@0x28 0x1D 0x4C 0x06
//0.885V
i2cset -f -y 14 0x20 0x00 0
i2ctransfer -f -y 14 w3@0x20 0x21 0x62 0x01
tools/Multiphase_comboB.txt
+188
View File
@@ -0,0 +1,188 @@
//0.870V
i2cset -f -y 13 0x25 0x00 0
i2ctransfer -f -y 13 w3@0x25 0x21 0x7D 0x00
i2cset -f -y 13 0x25 0x00 2
i2ctransfer -f -y 13 w3@0x25 0x0D 0xB4 0x0F
//0.870V
i2cset -f -y 15 0x26 0x00 0
i2ctransfer -f -y 15 w3@0x26 0x21 0x7D 0x00
i2cset -f -y 15 0x26 0x00 2
i2ctransfer -f -y 15 w3@0x26 0x0D 0xB4 0x0F
//0.775V
i2cset -f -y 13 0x25 0x00 1
i2ctransfer -f -y 13 w3@0x25 0x21 0x6A 0x00
i2cset -f -y 13 0x25 0x00 2
i2ctransfer -f -y 13 w3@0x25 0x1D 0xAA 0x06
//0.775V
i2cset -f -y 15 0x26 0x00 1
i2ctransfer -f -y 15 w3@0x26 0x21 0x6A 0x00
i2cset -f -y 15 0x26 0x00 2
i2ctransfer -f -y 15 w3@0x26 0x1D 0xAA 0x06
//0.775V
i2cset -f -y 13 0x21 0x00 0
i2ctransfer -f -y 13 w3@0x21 0x21 0x6A 0x00
i2cset -f -y 13 0x21 0x00 2
i2ctransfer -f -y 13 w3@0x21 0x0D 0x52 0x0D
//0.775V
i2cset -f -y 13 0x21 0x00 1
i2ctransfer -f -y 13 w3@0x21 0x21 0x6A 0x00
i2cset -f -y 13 0x21 0x00 2
i2ctransfer -f -y 13 w3@0x21 0x1D 0xAA 0x06
//0.775V
i2cset -f -y 13 0x22 0x00 0
i2ctransfer -f -y 13 w3@0x22 0x21 0x6A 0x00
i2cset -f -y 13 0x22 0x00 2
i2ctransfer -f -y 13 w3@0x22 0x0D 0x52 0x0D
//0.775V
i2cset -f -y 13 0x22 0x00 1
i2ctransfer -f -y 13 w3@0x22 0x21 0x6A 0x00
i2cset -f -y 13 0x22 0x00 2
i2ctransfer -f -y 13 w3@0x22 0x1D 0xAA 0x06
//0.775V
i2cset -f -y 15 0x23 0x00 0
i2ctransfer -f -y 15 w3@0x23 0x21 0x6A 0x00
i2cset -f -y 15 0x23 0x00 2
i2ctransfer -f -y 15 w3@0x23 0x0D 0x52 0x0D
//0.775V
i2cset -f -y 15 0x23 0x00 1
i2ctransfer -f -y 15 w3@0x23 0x21 0x6A 0x00
i2cset -f -y 15 0x23 0x00 2
i2ctransfer -f -y 15 w3@0x23 0x1D 0xAA 0x06
//0.775V
i2cset -f -y 15 0x24 0x00 0
i2ctransfer -f -y 15 w3@0x24 0x21 0x6A 0x00
i2cset -f -y 15 0x24 0x00 2
i2ctransfer -f -y 15 w3@0x24 0x0D 0x52 0x0D
//0.775V
i2cset -f -y 15 0x24 0x00 1
i2ctransfer -f -y 15 w3@0x24 0x21 0x6A 0x00
i2cset -f -y 15 0x24 0x00 2
i2ctransfer -f -y 15 w3@0x24 0x1D 0xAA 0x06
//1.455V
i2cset -f -y 13 0x29 0x00 0
i2ctransfer -f -y 13 w3@0x29 0x21 0xF2 0x00
i2cset -f -y 13 0x29 0x00 2
i2ctransfer -f -y 13 w3@0x29 0x0D 0x51 0x1E
//1.455V
i2cset -f -y 13 0x29 0x00 1
i2ctransfer -f -y 13 w3@0x29 0x21 0xF2 0x00
i2cset -f -y 13 0x29 0x00 2
i2ctransfer -f -y 13 w3@0x29 0x1D 0x29 0x0F
//0.695V
i2cset -f -y 13 0x27 0x00 0
i2ctransfer -f -y 13 w3@0x27 0x21 0x5A 0x00
i2cset -f -y 13 0x27 0x00 2
i2ctransfer -f -y 13 w3@0x27 0x0D 0x54 0x0B
//0.695V
i2cset -f -y 13 0x27 0x00 1
i2ctransfer -f -y 13 w3@0x27 0x21 0x5A 0x00
i2cset -f -y 13 0x27 0x00 2
i2ctransfer -f -y 13 w3@0x27 0x1D 0xAC 0x05
//0.695V
i2cset -f -y 15 0x28 0x00 0
i2ctransfer -f -y 15 w3@0x28 0x21 0x5A 0x00
i2cset -f -y 15 0x28 0x00 2
i2ctransfer -f -y 15 w3@0x28 0x0D 0x54 0x0B
//0.695V
i2cset -f -y 15 0x28 0x00 1
i2ctransfer -f -y 15 w3@0x28 0x21 0x5A 0x00
i2cset -f -y 15 0x28 0x00 2
i2ctransfer -f -y 15 w3@0x28 0x1D 0xAC 0x05
//0.753V
i2cset -f -y 13 0x20 0x00 0
i2ctransfer -f -y 13 w3@0x20 0x21 0x2D 0x01
//0.870V
i2cset -f -y 14 0x25 0x00 0
i2ctransfer -f -y 14 w3@0x25 0x21 0x7D 0x00
i2cset -f -y 14 0x25 0x00 2
i2ctransfer -f -y 14 w3@0x25 0x0D 0xB4 0x0F
//0.870V
i2cset -f -y 16 0x26 0x00 0
i2ctransfer -f -y 16 w3@0x26 0x21 0x7D 0x00
i2cset -f -y 16 0x26 0x00 2
i2ctransfer -f -y 16 w3@0x26 0x0D 0xB4 0x0F
//0.775V
i2cset -f -y 14 0x25 0x00 1
i2ctransfer -f -y 14 w3@0x25 0x21 0x6A 0x00
i2cset -f -y 14 0x25 0x00 2
i2ctransfer -f -y 14 w3@0x25 0x1D 0xAA 0x06
//0.775V
i2cset -f -y 16 0x26 0x00 1
i2ctransfer -f -y 16 w3@0x26 0x21 0x6A 0x00
i2cset -f -y 16 0x26 0x00 2
i2ctransfer -f -y 16 w3@0x26 0x1D 0xAA 0x06
//0.775V
i2cset -f -y 14 0x21 0x00 0
i2ctransfer -f -y 14 w3@0x21 0x21 0x6A 0x00
i2cset -f -y 14 0x21 0x00 2
i2ctransfer -f -y 14 w3@0x21 0x0D 0x52 0x0D
//0.775V
i2cset -f -y 14 0x21 0x00 1
i2ctransfer -f -y 14 w3@0x21 0x21 0x6A 0x00
i2cset -f -y 14 0x21 0x00 2
i2ctransfer -f -y 14 w3@0x21 0x1D 0xAA 0x06
//0.775V
i2cset -f -y 14 0x22 0x00 0
i2ctransfer -f -y 14 w3@0x22 0x21 0x6A 0x00
i2cset -f -y 14 0x22 0x00 2
i2ctransfer -f -y 14 w3@0x22 0x0D 0x52 0x0D
//0.775V
i2cset -f -y 14 0x22 0x00 1
i2ctransfer -f -y 14 w3@0x22 0x21 0x6A 0x00
i2cset -f -y 14 0x22 0x00 2
i2ctransfer -f -y 14 w3@0x22 0x1D 0xAA 0x06
//0.775V
i2cset -f -y 16 0x23 0x00 0
i2ctransfer -f -y 16 w3@0x23 0x21 0x6A 0x00
i2cset -f -y 16 0x23 0x00 2
i2ctransfer -f -y 16 w3@0x23 0x0D 0x52 0x0D
//0.775V
i2cset -f -y 16 0x23 0x00 1
i2ctransfer -f -y 16 w3@0x23 0x21 0x6A 0x00
i2cset -f -y 16 0x23 0x00 2
i2ctransfer -f -y 16 w3@0x23 0x1D 0xAA 0x06
//0.775V
i2cset -f -y 16 0x24 0x00 0
i2ctransfer -f -y 16 w3@0x24 0x21 0x6A 0x00
i2cset -f -y 16 0x24 0x00 2
i2ctransfer -f -y 16 w3@0x24 0x0D 0x52 0x0D
//0.775V
i2cset -f -y 16 0x24 0x00 1
i2ctransfer -f -y 16 w3@0x24 0x21 0x6A 0x00
i2cset -f -y 16 0x24 0x00 2
i2ctransfer -f -y 16 w3@0x24 0x1D 0xAA 0x06
//1.455V
i2cset -f -y 14 0x29 0x00 0
i2ctransfer -f -y 14 w3@0x29 0x21 0xF2 0x00
i2cset -f -y 14 0x29 0x00 2
i2ctransfer -f -y 14 w3@0x29 0x0D 0x51 0x1E
//1.455V
i2cset -f -y 14 0x29 0x00 1
i2ctransfer -f -y 14 w3@0x29 0x21 0xF2 0x00
i2cset -f -y 14 0x29 0x00 2
i2ctransfer -f -y 14 w3@0x29 0x1D 0x29 0x0F
//0.695V
i2cset -f -y 14 0x27 0x00 0
i2ctransfer -f -y 14 w3@0x27 0x21 0x5A 0x00
i2cset -f -y 14 0x27 0x00 2
i2ctransfer -f -y 14 w3@0x27 0x0D 0x54 0x0B
//0.695V
i2cset -f -y 14 0x27 0x00 1
i2ctransfer -f -y 14 w3@0x27 0x21 0x5A 0x00
i2cset -f -y 14 0x27 0x00 2
i2ctransfer -f -y 14 w3@0x27 0x1D 0xAC 0x05
//0.695V
i2cset -f -y 16 0x28 0x00 0
i2ctransfer -f -y 16 w3@0x28 0x21 0x5A 0x00
i2cset -f -y 16 0x28 0x00 2
i2ctransfer -f -y 16 w3@0x28 0x0D 0x54 0x0B
//0.695V
i2cset -f -y 16 0x28 0x00 1
i2ctransfer -f -y 16 w3@0x28 0x21 0x5A 0x00
i2cset -f -y 16 0x28 0x00 2
i2ctransfer -f -y 16 w3@0x28 0x1D 0xAC 0x05
//0.753V
i2cset -f -y 14 0x20 0x00 0
i2ctransfer -f -y 14 w3@0x20 0x21 0x2D 0x01
tools/Multiphase_high3.txt
+188
View File
@@ -0,0 +1,188 @@
//0.930V
i2cset -f -y 13 0x25 0x00 0
i2ctransfer -f -y 13 w3@0x25 0x21 0x89 0x00
i2cset -f -y 13 0x25 0x00 2
i2ctransfer -f -y 13 w3@0x25 0x0D 0x34 0x11
//0.930V
i2cset -f -y 15 0x26 0x00 0
i2ctransfer -f -y 15 w3@0x26 0x21 0x89 0x00
i2cset -f -y 15 0x26 0x00 2
i2ctransfer -f -y 15 w3@0x26 0x0D 0x34 0x11
//0.775V
i2cset -f -y 13 0x25 0x00 1
i2ctransfer -f -y 13 w3@0x25 0x21 0x6A 0x00
i2cset -f -y 13 0x25 0x00 2
i2ctransfer -f -y 13 w3@0x25 0x1D 0xAA 0x06
//0.775V
i2cset -f -y 15 0x26 0x00 1
i2ctransfer -f -y 15 w3@0x26 0x21 0x6A 0x00
i2cset -f -y 15 0x26 0x00 2
i2ctransfer -f -y 15 w3@0x26 0x1D 0xAA 0x06
//0.775V
i2cset -f -y 13 0x21 0x00 0
i2ctransfer -f -y 13 w3@0x21 0x21 0x6A 0x00
i2cset -f -y 13 0x21 0x00 2
i2ctransfer -f -y 13 w3@0x21 0x0D 0x52 0x0D
//0.775V
i2cset -f -y 13 0x21 0x00 1
i2ctransfer -f -y 13 w3@0x21 0x21 0x6A 0x00
i2cset -f -y 13 0x21 0x00 2
i2ctransfer -f -y 13 w3@0x21 0x1D 0xAA 0x06
//0.775V
i2cset -f -y 13 0x22 0x00 0
i2ctransfer -f -y 13 w3@0x22 0x21 0x6A 0x00
i2cset -f -y 13 0x22 0x00 2
i2ctransfer -f -y 13 w3@0x22 0x0D 0x52 0x0D
//0.775V
i2cset -f -y 13 0x22 0x00 1
i2ctransfer -f -y 13 w3@0x22 0x21 0x6A 0x00
i2cset -f -y 13 0x22 0x00 2
i2ctransfer -f -y 13 w3@0x22 0x1D 0xAA 0x06
//0.775V
i2cset -f -y 15 0x23 0x00 0
i2ctransfer -f -y 15 w3@0x23 0x21 0x6A 0x00
i2cset -f -y 15 0x23 0x00 2
i2ctransfer -f -y 15 w3@0x23 0x0D 0x52 0x0D
//0.775V
i2cset -f -y 15 0x23 0x00 1
i2ctransfer -f -y 15 w3@0x23 0x21 0x6A 0x00
i2cset -f -y 15 0x23 0x00 2
i2ctransfer -f -y 15 w3@0x23 0x1D 0xAA 0x06
//0.775V
i2cset -f -y 15 0x24 0x00 0
i2ctransfer -f -y 15 w3@0x24 0x21 0x6A 0x00
i2cset -f -y 15 0x24 0x00 2
i2ctransfer -f -y 15 w3@0x24 0x0D 0x52 0x0D
//0.775V
i2cset -f -y 15 0x24 0x00 1
i2ctransfer -f -y 15 w3@0x24 0x21 0x6A 0x00
i2cset -f -y 15 0x24 0x00 2
i2ctransfer -f -y 15 w3@0x24 0x1D 0xAA 0x06
//1.545V
i2cset -f -y 13 0x29 0x00 0
i2ctransfer -f -y 13 w3@0x29 0x21 0x04 0x01
i2cset -f -y 13 0x29 0x00 2
i2ctransfer -f -y 13 w3@0x29 0x0D 0x91 0x20
//1.545V
i2cset -f -y 13 0x29 0x00 1
i2ctransfer -f -y 13 w3@0x29 0x21 0x04 0x01
i2cset -f -y 13 0x29 0x00 2
i2ctransfer -f -y 13 w3@0x29 0x1D 0x49 0x10
//0.745V
i2cset -f -y 13 0x27 0x00 0
i2ctransfer -f -y 13 w3@0x27 0x21 0x64 0x00
i2cset -f -y 13 0x27 0x00 2
i2ctransfer -f -y 13 w3@0x27 0x0D 0x94 0x0C
//0.745V
i2cset -f -y 13 0x27 0x00 1
i2ctransfer -f -y 13 w3@0x27 0x21 0x64 0x00
i2cset -f -y 13 0x27 0x00 2
i2ctransfer -f -y 13 w3@0x27 0x1D 0x4C 0x06
//0.745V
i2cset -f -y 15 0x28 0x00 0
i2ctransfer -f -y 15 w3@0x28 0x21 0x64 0x00
i2cset -f -y 15 0x28 0x00 2
i2ctransfer -f -y 15 w3@0x28 0x0D 0x94 0x0C
//0.745V
i2cset -f -y 15 0x28 0x00 1
i2ctransfer -f -y 15 w3@0x28 0x21 0x64 0x00
i2cset -f -y 15 0x28 0x00 2
i2ctransfer -f -y 15 w3@0x28 0x1D 0x4C 0x06
//0.885V
i2cset -f -y 13 0x20 0x00 0
i2ctransfer -f -y 13 w3@0x20 0x21 0x62 0x01
//0.930V
i2cset -f -y 14 0x25 0x00 0
i2ctransfer -f -y 14 w3@0x25 0x21 0x89 0x00
i2cset -f -y 14 0x25 0x00 2
i2ctransfer -f -y 14 w3@0x25 0x0D 0x34 0x11
//0.930V
i2cset -f -y 16 0x26 0x00 0
i2ctransfer -f -y 16 w3@0x26 0x21 0x89 0x00
i2cset -f -y 16 0x26 0x00 2
i2ctransfer -f -y 16 w3@0x26 0x0D 0x34 0x11
//0.775V
i2cset -f -y 14 0x25 0x00 1
i2ctransfer -f -y 14 w3@0x25 0x21 0x6A 0x00
i2cset -f -y 14 0x25 0x00 2
i2ctransfer -f -y 14 w3@0x25 0x1D 0xAA 0x06
//0.775V
i2cset -f -y 16 0x26 0x00 1
i2ctransfer -f -y 16 w3@0x26 0x21 0x6A 0x00
i2cset -f -y 16 0x26 0x00 2
i2ctransfer -f -y 16 w3@0x26 0x1D 0xAA 0x06
//0.775V
i2cset -f -y 14 0x21 0x00 0
i2ctransfer -f -y 14 w3@0x21 0x21 0x6A 0x00
i2cset -f -y 14 0x21 0x00 2
i2ctransfer -f -y 14 w3@0x21 0x0D 0x52 0x0D
//0.775V
i2cset -f -y 14 0x21 0x00 1
i2ctransfer -f -y 14 w3@0x21 0x21 0x6A 0x00
i2cset -f -y 14 0x21 0x00 2
i2ctransfer -f -y 14 w3@0x21 0x1D 0xAA 0x06
//0.775V
i2cset -f -y 14 0x22 0x00 0
i2ctransfer -f -y 14 w3@0x22 0x21 0x6A 0x00
i2cset -f -y 14 0x22 0x00 2
i2ctransfer -f -y 14 w3@0x22 0x0D 0x52 0x0D
//0.775V
i2cset -f -y 14 0x22 0x00 1
i2ctransfer -f -y 14 w3@0x22 0x21 0x6A 0x00
i2cset -f -y 14 0x22 0x00 2
i2ctransfer -f -y 14 w3@0x22 0x1D 0xAA 0x06
//0.775V
i2cset -f -y 16 0x23 0x00 0
i2ctransfer -f -y 16 w3@0x23 0x21 0x6A 0x00
i2cset -f -y 16 0x23 0x00 2
i2ctransfer -f -y 16 w3@0x23 0x0D 0x52 0x0D
//0.775V
i2cset -f -y 16 0x23 0x00 1
i2ctransfer -f -y 16 w3@0x23 0x21 0x6A 0x00
i2cset -f -y 16 0x23 0x00 2
i2ctransfer -f -y 16 w3@0x23 0x1D 0xAA 0x06
//0.775V
i2cset -f -y 16 0x24 0x00 0
i2ctransfer -f -y 16 w3@0x24 0x21 0x6A 0x00
i2cset -f -y 16 0x24 0x00 2
i2ctransfer -f -y 16 w3@0x24 0x0D 0x52 0x0D
//0.775V
i2cset -f -y 16 0x24 0x00 1
i2ctransfer -f -y 16 w3@0x24 0x21 0x6A 0x00
i2cset -f -y 16 0x24 0x00 2
i2ctransfer -f -y 16 w3@0x24 0x1D 0xAA 0x06
//1.545V
i2cset -f -y 14 0x29 0x00 0
i2ctransfer -f -y 14 w3@0x29 0x21 0x04 0x01
i2cset -f -y 14 0x29 0x00 2
i2ctransfer -f -y 14 w3@0x29 0x0D 0x91 0x20
//1.545V
i2cset -f -y 14 0x29 0x00 1
i2ctransfer -f -y 14 w3@0x29 0x21 0x04 0x01
i2cset -f -y 14 0x29 0x00 2
i2ctransfer -f -y 14 w3@0x29 0x1D 0x49 0x10
//0.745V
i2cset -f -y 14 0x27 0x00 0
i2ctransfer -f -y 14 w3@0x27 0x21 0x64 0x00
i2cset -f -y 14 0x27 0x00 2
i2ctransfer -f -y 14 w3@0x27 0x0D 0x94 0x0C
//0.745V
i2cset -f -y 14 0x27 0x00 1
i2ctransfer -f -y 14 w3@0x27 0x21 0x64 0x00
i2cset -f -y 14 0x27 0x00 2
i2ctransfer -f -y 14 w3@0x27 0x1D 0x4C 0x06
//0.745V
i2cset -f -y 16 0x28 0x00 0
i2ctransfer -f -y 16 w3@0x28 0x21 0x64 0x00
i2cset -f -y 16 0x28 0x00 2
i2ctransfer -f -y 16 w3@0x28 0x0D 0x94 0x0C
//0.745V
i2cset -f -y 16 0x28 0x00 1
i2ctransfer -f -y 16 w3@0x28 0x21 0x64 0x00
i2cset -f -y 16 0x28 0x00 2
i2ctransfer -f -y 16 w3@0x28 0x1D 0x4C 0x06
//0.885V
i2cset -f -y 14 0x20 0x00 0
i2ctransfer -f -y 14 w3@0x20 0x21 0x62 0x01
tools/Multiphase_low3.txt
+188
View File
@@ -0,0 +1,188 @@
//0.870V
i2cset -f -y 13 0x25 0x00 0
i2ctransfer -f -y 13 w3@0x25 0x21 0x7D 0x00
i2cset -f -y 13 0x25 0x00 2
i2ctransfer -f -y 13 w3@0x25 0x0D 0xB4 0x0F
//0.870V
i2cset -f -y 15 0x26 0x00 0
i2ctransfer -f -y 15 w3@0x26 0x21 0x7D 0x00
i2cset -f -y 15 0x26 0x00 2
i2ctransfer -f -y 15 w3@0x26 0x0D 0xB4 0x0F
//0.725V
i2cset -f -y 13 0x25 0x00 1
i2ctransfer -f -y 13 w3@0x25 0x21 0x60 0x00
i2cset -f -y 13 0x25 0x00 2
i2ctransfer -f -y 13 w3@0x25 0x1D 0x0A 0x06
//0.725V
i2cset -f -y 15 0x26 0x00 1
i2ctransfer -f -y 15 w3@0x26 0x21 0x60 0x00
i2cset -f -y 15 0x26 0x00 2
i2ctransfer -f -y 15 w3@0x26 0x1D 0x0A 0x06
//0.725V
i2cset -f -y 13 0x21 0x00 0
i2ctransfer -f -y 13 w3@0x21 0x21 0x60 0x00
i2cset -f -y 13 0x21 0x00 2
i2ctransfer -f -y 13 w3@0x21 0x0D 0x12 0x0C
//0.725V
i2cset -f -y 13 0x21 0x00 1
i2ctransfer -f -y 13 w3@0x21 0x21 0x60 0x00
i2cset -f -y 13 0x21 0x00 2
i2ctransfer -f -y 13 w3@0x21 0x1D 0x0A 0x06
//0.725V
i2cset -f -y 13 0x22 0x00 0
i2ctransfer -f -y 13 w3@0x22 0x21 0x60 0x00
i2cset -f -y 13 0x22 0x00 2
i2ctransfer -f -y 13 w3@0x22 0x0D 0x12 0x0C
//0.725V
i2cset -f -y 13 0x22 0x00 1
i2ctransfer -f -y 13 w3@0x22 0x21 0x60 0x00
i2cset -f -y 13 0x22 0x00 2
i2ctransfer -f -y 13 w3@0x22 0x1D 0x0A 0x06
//0.725V
i2cset -f -y 15 0x23 0x00 0
i2ctransfer -f -y 15 w3@0x23 0x21 0x60 0x00
i2cset -f -y 15 0x23 0x00 2
i2ctransfer -f -y 15 w3@0x23 0x0D 0x12 0x0C
//0.725V
i2cset -f -y 15 0x23 0x00 1
i2ctransfer -f -y 15 w3@0x23 0x21 0x60 0x00
i2cset -f -y 15 0x23 0x00 2
i2ctransfer -f -y 15 w3@0x23 0x1D 0x0A 0x06
//0.725V
i2cset -f -y 15 0x24 0x00 0
i2ctransfer -f -y 15 w3@0x24 0x21 0x60 0x00
i2cset -f -y 15 0x24 0x00 2
i2ctransfer -f -y 15 w3@0x24 0x0D 0x12 0x0C
//0.725V
i2cset -f -y 15 0x24 0x00 1
i2ctransfer -f -y 15 w3@0x24 0x21 0x60 0x00
i2cset -f -y 15 0x24 0x00 2
i2ctransfer -f -y 15 w3@0x24 0x1D 0x0A 0x06
//1.455V
i2cset -f -y 13 0x29 0x00 0
i2ctransfer -f -y 13 w3@0x29 0x21 0xF2 0x00
i2cset -f -y 13 0x29 0x00 2
i2ctransfer -f -y 13 w3@0x29 0x0D 0x51 0x1E
//1.455V
i2cset -f -y 13 0x29 0x00 1
i2ctransfer -f -y 13 w3@0x29 0x21 0xF2 0x00
i2cset -f -y 13 0x29 0x00 2
i2ctransfer -f -y 13 w3@0x29 0x1D 0x29 0x0F
//0.695V
i2cset -f -y 13 0x27 0x00 0
i2ctransfer -f -y 13 w3@0x27 0x21 0x5A 0x00
i2cset -f -y 13 0x27 0x00 2
i2ctransfer -f -y 13 w3@0x27 0x0D 0x54 0x0B
//0.695V
i2cset -f -y 13 0x27 0x00 1
i2ctransfer -f -y 13 w3@0x27 0x21 0x5A 0x00
i2cset -f -y 13 0x27 0x00 2
i2ctransfer -f -y 13 w3@0x27 0x1D 0xAC 0x05
//0.695V
i2cset -f -y 15 0x28 0x00 0
i2ctransfer -f -y 15 w3@0x28 0x21 0x5A 0x00
i2cset -f -y 15 0x28 0x00 2
i2ctransfer -f -y 15 w3@0x28 0x0D 0x54 0x0B
//0.695V
i2cset -f -y 15 0x28 0x00 1
i2ctransfer -f -y 15 w3@0x28 0x21 0x5A 0x00
i2cset -f -y 15 0x28 0x00 2
i2ctransfer -f -y 15 w3@0x28 0x1D 0xAC 0x05
//0.753V
i2cset -f -y 13 0x20 0x00 0
i2ctransfer -f -y 13 w3@0x20 0x21 0x2D 0x01
//0.870V
i2cset -f -y 14 0x25 0x00 0
i2ctransfer -f -y 14 w3@0x25 0x21 0x7D 0x00
i2cset -f -y 14 0x25 0x00 2
i2ctransfer -f -y 14 w3@0x25 0x0D 0xB4 0x0F
//0.870V
i2cset -f -y 16 0x26 0x00 0
i2ctransfer -f -y 16 w3@0x26 0x21 0x7D 0x00
i2cset -f -y 16 0x26 0x00 2
i2ctransfer -f -y 16 w3@0x26 0x0D 0xB4 0x0F
//0.725V
i2cset -f -y 14 0x25 0x00 1
i2ctransfer -f -y 14 w3@0x25 0x21 0x60 0x00
i2cset -f -y 14 0x25 0x00 2
i2ctransfer -f -y 14 w3@0x25 0x1D 0x0A 0x06
//0.725V
i2cset -f -y 16 0x26 0x00 1
i2ctransfer -f -y 16 w3@0x26 0x21 0x60 0x00
i2cset -f -y 16 0x26 0x00 2
i2ctransfer -f -y 16 w3@0x26 0x1D 0x0A 0x06
//0.725V
i2cset -f -y 14 0x21 0x00 0
i2ctransfer -f -y 14 w3@0x21 0x21 0x60 0x00
i2cset -f -y 14 0x21 0x00 2
i2ctransfer -f -y 14 w3@0x21 0x0D 0x12 0x0C
//0.725V
i2cset -f -y 14 0x21 0x00 1
i2ctransfer -f -y 14 w3@0x21 0x21 0x60 0x00
i2cset -f -y 14 0x21 0x00 2
i2ctransfer -f -y 14 w3@0x21 0x1D 0x0A 0x06
//0.725V
i2cset -f -y 14 0x22 0x00 0
i2ctransfer -f -y 14 w3@0x22 0x21 0x60 0x00
i2cset -f -y 14 0x22 0x00 2
i2ctransfer -f -y 14 w3@0x22 0x0D 0x12 0x0C
//0.725V
i2cset -f -y 14 0x22 0x00 1
i2ctransfer -f -y 14 w3@0x22 0x21 0x60 0x00
i2cset -f -y 14 0x22 0x00 2
i2ctransfer -f -y 14 w3@0x22 0x1D 0x0A 0x06
//0.725V
i2cset -f -y 16 0x23 0x00 0
i2ctransfer -f -y 16 w3@0x23 0x21 0x60 0x00
i2cset -f -y 16 0x23 0x00 2
i2ctransfer -f -y 16 w3@0x23 0x0D 0x12 0x0C
//0.725V
i2cset -f -y 16 0x23 0x00 1
i2ctransfer -f -y 16 w3@0x23 0x21 0x60 0x00
i2cset -f -y 16 0x23 0x00 2
i2ctransfer -f -y 16 w3@0x23 0x1D 0x0A 0x06
//0.725V
i2cset -f -y 16 0x24 0x00 0
i2ctransfer -f -y 16 w3@0x24 0x21 0x60 0x00
i2cset -f -y 16 0x24 0x00 2
i2ctransfer -f -y 16 w3@0x24 0x0D 0x12 0x0C
//0.725V
i2cset -f -y 16 0x24 0x00 1
i2ctransfer -f -y 16 w3@0x24 0x21 0x60 0x00
i2cset -f -y 16 0x24 0x00 2
i2ctransfer -f -y 16 w3@0x24 0x1D 0x0A 0x06
//1.455V
i2cset -f -y 14 0x29 0x00 0
i2ctransfer -f -y 14 w3@0x29 0x21 0xF2 0x00
i2cset -f -y 14 0x29 0x00 2
i2ctransfer -f -y 14 w3@0x29 0x0D 0x51 0x1E
//1.455V
i2cset -f -y 14 0x29 0x00 1
i2ctransfer -f -y 14 w3@0x29 0x21 0xF2 0x00
i2cset -f -y 14 0x29 0x00 2
i2ctransfer -f -y 14 w3@0x29 0x1D 0x29 0x0F
//0.695V
i2cset -f -y 14 0x27 0x00 0
i2ctransfer -f -y 14 w3@0x27 0x21 0x5A 0x00
i2cset -f -y 14 0x27 0x00 2
i2ctransfer -f -y 14 w3@0x27 0x0D 0x54 0x0B
//0.695V
i2cset -f -y 14 0x27 0x00 1
i2ctransfer -f -y 14 w3@0x27 0x21 0x5A 0x00
i2cset -f -y 14 0x27 0x00 2
i2ctransfer -f -y 14 w3@0x27 0x1D 0xAC 0x05
//0.695V
i2cset -f -y 16 0x28 0x00 0
i2ctransfer -f -y 16 w3@0x28 0x21 0x5A 0x00
i2cset -f -y 16 0x28 0x00 2
i2ctransfer -f -y 16 w3@0x28 0x0D 0x54 0x0B
//0.695V
i2cset -f -y 16 0x28 0x00 1
i2ctransfer -f -y 16 w3@0x28 0x21 0x5A 0x00
i2cset -f -y 16 0x28 0x00 2
i2ctransfer -f -y 16 w3@0x28 0x1D 0xAC 0x05
//0.753V
i2cset -f -y 14 0x20 0x00 0
i2ctransfer -f -y 14 w3@0x20 0x21 0x2D 0x01