etwen/Blanton_TTL_Script
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases 18 Wiki Activity

fix(stress): Keep the SSD and USB jobs alive for the whole soak

Browse Source 
qfx5252-stress-usb was started with --runtime 60. It finished a minute
into an overnight run and the USB path sat idle for the rest of the
night - nothing failed, nothing said so, and the log looked complete.
SSD had the same shape at --runtime 3600. Both are now 86400, and the
BMC DDR memtester drops its loop count so it runs until stopped.

86400 is 24h, not forever. Past that SSD and USB die quietly and the
only clue is the shorter bgctl list Script B already prints each round.
Said so in the version history, the release notes and ARCHITECTURE.

Adds blanton_multiphase_margin.sh: the multiphase controllers on both
switch boards over the native i2c buses (SWB0 on i2c-13/15, SWB1 on
-14/-16), 19 rails each. high3/low3/comboA/comboB set voltages and print
one line per rail; save commits them and prints Multiphase Save All,
because that list has no per-rail mapping to report against.

Two hazards it carries: save is STORE_USER_ALL and permanent, and these
are NOT the LTC2980s margin.sh drives - the two tools reach the same
rails from opposite sides with no interlock between them.

The emitted commands were diffed against tools/Multiphase_*.txt: argv
identical for all five. The rail-to-netname mapping was cross-checked
against the bus numbers rather than trusted by line position - blocks
1..19 are all bus 13/15 and 20..38 all 14/16, matching the SWB0/SWB1
split of Multiphase_Netname.

blanton_traffic_linespeed v0.7.0 appends PatternRandom=yes to every tx
including ce0, and the defaults become tx 200 length=324. A fixed
pattern can sit on a benign bit sequence for a whole run; a changing one
is what exposes a weak lane. -r no forces fixed, -r "" omits the
argument for an SDK that will not take it. Bytes per burst went 51200 ->
64800, so absolute counter totals do not carry across this build - the
pair cross-check that decides PASS/FAIL does.

Script A -> V1.1.5.

Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_014RetWKFZFG1ZHcitQAyhwM
This commit is contained in:
etwen
2026-09-01 11:04:45 +08:00
co-authored by Claude Opus 5
parent db44f72352
commit 215fed6e95
13 changed files with 2061 additions and 20 deletions
Download Patch File Download Diff File Expand all files Collapse all files
ARCHITECTURE.md
+13 -3
View File
@@ -135,6 +135,8 @@ Blanton_TTL_Script/
│ ├── 100G_PRBS.txt # 100G PRBS 原始指令（port_prbs_monitor.sh 的來源）
│ ├── TR518.txt # 內建封包測試 tr 518 → blanton_tr518.sh
│ ├── BER_Test.txt # 全機 PRBS BER 指令 → blanton_ber.sh
│ ├── Multiphase_{high3,low3,comboA,comboB,Save}.txt # → blanton_multiphase_margin.sh
│ ├── Multiphase_Netname # 38 條軌的 net 名稱（區塊順序對應）
│ ├── 100G_Traffic.txt # ce0 VLAN 138 打流 → blanton_traffic_linespeed.sh
│ ├── fan_ctrl.txt # MAX31790 unbind/bind + fan-speed-control.sh 30
│ └── gen_channel_map.sh # settings/*.conf → docs/LTC2980_channel_map.csv（需 gawk）
@@ -190,6 +192,7 @@ Blanton_TTL_Script/
│ # eth0→TARGET_10G、eth1→TARGET_1G，兩張卡同時持續 ping
├── port_prbs_monitor.sh # 100G uplink PRBS 測試（bcmcmd phy diag）
├── blanton_ber.sh # 全機 SerDes BER 掃描（phydiag prbs / prbsstat）
├── blanton_multiphase_margin.sh # 多相 VRM margin（原生 i2c，38 條軌）
├── nfc_polling.sh # NFC tag 背景輪詢 + PASS/FAIL 統計
├── blantons_nfc_validate.py # NFC/NCI 驗證工具（廠商提供，未修改）
├── blanton_tr518.sh # TR518 封包測試，量功耗前的負載來源
@@ -357,17 +360,18 @@ PROFILE_CHANNELS=( "0:high:8" "1:low:8" ... ) # "channel:operation:change_perc
| 模組 | 進入點 | 功能 |
|------|--------|------|
| **Script A（Pre-test）** | `1_Blanton_Script_A.ttl` V1.1.4 | root 登入 → `date -s` 對時 → 清 job log → **收掉前一輪殘留**（`hw-test-session finish` → `bgctl reset --yes` → `bgctl stop --all` → `bgctl list` 確認清空）→ `hw-test-session start` → **設定風扇轉速** → **等資料面就緒**（`wait_init.ttl`）→ DUT 清單（boot/version/fwutil/syseeprom/ssdhealth/TPM/NVMe）→ BMC enroll + version/status → source bash 工具 → 清/讀 7 組 PCIe AER + `ras-mc-ctl --summary` → `lspci` → margin → PMON → dmesg → **10G/1G 管理網路 ping** → **NFC 基線**（start → 30s → stop → report）→ 100G uplink 設定與狀態 → **一輪流量基線** → `show uptime` |
| **Script B（Stress）** | `2_Blanton_Script_B.ttl` | `mlucas-avx2 -cpu 0:15` + `bgctl run` 的 `memtester` / SSD / USB 壓力 + BMC DDR（`bmc-manager run memtester`）→ BMC USB net test（探測 cdc_ncm 介面，`systemd-run` 掛 4 小時 ping）→ 啟動 mgmt ping 監控 → **啟動 NFC 輪詢** → `jobs` / `bgctl list` → traffic（依 `SWB_UNIT`）→ `while 1` 每輪 PMON + `bgctl list`/`jobs` + `pause 60`（**V1.1.4 起 margin 不在迴圈內**）|
| **Script A（Pre-test）** | `1_Blanton_Script_A.ttl` V1.1.5 | root 登入 → `date -s` 對時 → 清 job log → **收掉前一輪殘留**（`hw-test-session finish` → `bgctl reset --yes` → `bgctl stop --all` → `bgctl list` 確認清空）→ `hw-test-session start` → **設定風扇轉速** → **等資料面就緒**（`wait_init.ttl`）→ DUT 清單（boot/version/fwutil/syseeprom/ssdhealth/TPM/NVMe）→ BMC enroll + version/status → source bash 工具 → 清/讀 7 組 PCIe AER + `ras-mc-ctl --summary` → `lspci` → margin → PMON → dmesg → **10G/1G 管理網路 ping** → **NFC 基線**（start → 30s → stop → report）→ 100G uplink 設定與狀態 → **一輪流量基線** → `show uptime` |
| **Script B（Stress）** | `2_Blanton_Script_B.ttl` | `mlucas-avx2 -cpu 0:15` + `bgctl run` 的 `memtester` / SSD / USB 壓力（v1.1.5 起 SSD/USB `--runtime 86400`、BMC memtester 不帶次數 = 跑到被停） + BMC DDR（`bmc-manager run memtester`）→ BMC USB net test（探測 cdc_ncm 介面，`systemd-run` 掛 4 小時 ping）→ 啟動 mgmt ping 監控 → **啟動 NFC 輪詢** → `jobs` / `bgctl list` → traffic（依 `SWB_UNIT`）→ `while 1` 每輪 PMON + `bgctl list`/`jobs` + `pause 60`（**V1.1.4 起 margin 不在迴圈內**）|
| **Script C（Post-test）** | `3_Blanton_Script_C.ttl` | `kill $(jobs -p)` + `bgctl stop --all` / `reset` + 停 BMC USB unit、mgmt ping 與 **NFC 輪詢** → PMON + dmesg → 7 組 AER + `ras-mc-ctl` → BMC USB `journalctl` → `ip -s link show eth0/eth1` → `cat` mlucas log → **NFC `report`** → traffic `stop` + `report` → **BER 掃描**（依 `SWB_UNIT`）→ NVMe 健康 → `show reboot-cause` → **margin 掃描**（`EN_Margin`，V1.1.4 由 Script B 移來）→ `uptime` → **job log 複製到 USB（帶時戳）** → `exit` + wait『Script done』→ `hw-test-session finish` |
| **Script 4（Thermal / Safety）** | `4_Blanton_Script_thermal_safety.ttl` | **獨立腳本，不接 A→B→C。** Script A 式的環境建立（登入 / session / 風扇 / `wait_init` / DUT 清單 / BMC / PCIe 清除 / `pcie_bus` / PMON / dmesg）→ **滿載**（`mlucas-avx2 -cpu 0:15` 背景 + `blanton_tr518.sh start`）→ `while 1`：PMON + `TH6_SWB0/1_power_readback.sh` + `bgctl list` / `jobs`，`pause 60`。**沒有收尾段** —— 中斷後 DUT 仍在 `port cd lb=mac` / `l2 learn off` / `test mode nr=yes`，要手動 `blanton_tr518.sh stop` |
| **SWB loopback 流量** | `blanton_traffic_linespeed <sub> [-u 0\|1\|all]` | `init`（VLAN 30..137，成對 `cdN`/`cdN+32`）→ `clear` → `start`（`tx 100 length=512`）→ `stop` → `report`（per-pair TX/RX 交叉比對 PASS/FAIL）；另有 `ps`（link/speed）與 `run`（一條龍）。**V0.6.0 起含 100G uplink `ce0`**（VLAN 138）：它沒有 loopback 對象，靠 **ingress mirror 打回自己**維持循環，`report` 最後一列就是它，底下再接一份跨 unit summary |
| **SWB loopback 流量** | `blanton_traffic_linespeed <sub> [-u 0\|1\|all]` | `init`（VLAN 30..137，成對 `cdN`/`cdN+32`）→ `clear` → `start`（`tx 200 length=324 PatternRandom=yes`，v0.7.0 起）→ `stop` → `report`（per-pair TX/RX 交叉比對 PASS/FAIL）；另有 `ps`（link/speed）與 `run`（一條龍）。**V0.6.0 起含 100G uplink `ce0`**（VLAN 138）：它沒有 loopback 對象，靠 **ingress mirror 打回自己**維持循環，`report` 最後一列就是它，底下再接一份跨 unit summary |
| **FPGA 暫存器存取** | `cb_fpga <fn> <addr> [data]`、`fpga_rescan` | pcimem 打 `resource0` + BAR 相對 offset，32-bit word；BDF 於 source 時自動偵測；`pmc/icb/swb0/swb1_fpga` 走 VSPI 窗口 |
| **CB I2C / PMBus** | `cb_i2c_init/scan/read/write`、`cb_pmbus_read/write/linear16` | FPGA F3 OpenCores master，**讀用 Repeated START**（SMBus/PMBus 裝置必需） |
| **ICB / PDB 存取** | `vi2c_init/scan/read/write`、`vi2c_scan_all` | CB F3 VI2C proxy，~3.3 ms/reg，取代 VSPI 的 ~18 ms/reg（後者會踩 SMBus 25–35 ms timeout） |
| **溫度** | `temp_cb` / `temp_icb` / `temp_all` | TMP75（12-bit 左靠齊 ×0.0625）、TMP432（含 RANGE bit 的 −64 偏移、remote1/2） |
| **電源資料** | `pwr_data` / `pwr_data_pdb` / `pwr_pdb_id` | SWB VRM 全軌 Vin/Vout/Iout/Temp 對齊表；MP29816 解析度**執行期從 `MFR_VOUT_SCALE_LOOP` 讀**，不寫死 |
| **電壓 Margin** | `margin_init/status/set/apply_profile/save` + `*_all.sh` | 9 顆 LTC2980（CB CONN13、SWB0/1 CONN13~16）批次 high/low margin 與狀態掃描。`VNOM` 為 Blanton 實測中位數（2026-08-30）；SWB 的 profile 是 per-CONN，套錯 CONN 會 margin 到錯的軌且不報錯。v2.6.0 起 SWB 路徑真正接上共用 cb_i2c 後端，並有 `margin_swb_info/probe/scan/reset/sem` 除錯包裝 |
| **Multiphase VRM margin** | `blanton_multiphase_margin.sh {high3\|low3\|comboA\|comboB\|save} [-u 0\|1\|all]` | 兩片 SWB 的多相控制器（**不是** `margin.sh` 管的 LTC2980），走原生 i2c bus：SWB0 = `/dev/i2c-13`+`-15`、SWB1 = `-14`+`-16`。每片 19 條軌、共 38 條，逐條印 `SWB0_0V9_ANLG0 - 0.930V Configure Done`。`save` 沒有 per-rail 對應，只印 `Multiphase Save All`。⚠️ `save` 是 `STORE_USER_ALL`（0x15，TH6 core 用 0x17）**永久寫 NVM**；⚠️ 與 `margin.sh` 從兩側摸同一批軌，**不可同時用** |
| **Margin 寫 NVM** | `margin_save` / `margin_save all` / `margin_save blanton` | ⚠️ 永久寫入。`0x15` 送 PMBus **send-byte**（不帶 data byte）。`all` = 依 `settings/` 走 9 顆、跑完還原原本載入的板子；`blanton` = 本平台捷徑，18 顆全走原生 i2c bus（`MARGIN_BLANTON_STORE` 表），不需 `margin_init`。每筆之間 `MARGIN_STORE_SETTLE`（0.5s），工具**不 poll busy bit** |
| **管理網路 ping** | `mgmt_ping_monitor.sh {start\|stop\|status\|fg\|tail\|clear\|summary}` | 一輪 = 10G leg + 1G leg，各自 `ip address/route replace` 後 `ping -I <if>` 打自己的對端；兩張卡都保持 up。每 leg 記 `ip -s link show` 與該卡的 TX/RX packet delta，另出一行可 grep 的 `RESULT` |
| **BMC 監控** | `bmc_monitor.sh {start\|stop\|status\|fg\|tail\|clear}` | 由 host 端 `bmc-manager run` 週期取樣 `free -m`，另加一組 **I2C 寫入/讀回圖樣測試**（bus 1、addr 0x41、offset 0x00C0，寫 `55AA55AA` 讀回、再寫 `AA55AA55` 讀回）。B 啟動、C 停止並 `cat log/bmc_poll.log` |
@@ -804,6 +808,12 @@ margin status、全部 VRM 軌的 Vin/Vout/Iout/Temp、CB + ICB 溫感讀值，
**`sleep 120` 的方向還沒驗證** —— 若 `tr 518` 的流量是有時限的（參數含 `runtime=1`、
`CheckDataTime=200`），等 120 秒可能量到已經降下來的值，要上機比對 0s / 30s / 120s 三次；
TTL 尚未呼叫它。
- **`--runtime 86400` 是 24 小時的上限，不是「永遠」**：超過一天的 soak，SSD 與 USB 壓力會在
第 24 小時安靜結束，剩下的時間那兩項是閒置的。Script B 每輪都印 `bgctl list`，數量變少會看得到，
但**沒有任何東西會主動報警**。真的要跑更久，得把數字改大或加一段重啟 job 的邏輯。
- **`blanton_multiphase_margin.sh` 與 `margin.sh` 沒有互斥機制**：兩支從不同側（原生 i2c vs
LTC2980 PMBus）摸同一批軌，各自都假設自己是唯一的寫入者。目前只靠文件與 help 提醒，
沒有任何執行期檢查。
- **Script 4 沒有收尾段**：`while 1` 之後就是檔案結尾，中斷時 DUT 停在 `port cd lb=mac` /
`l2 learn off` / `test mode nr=yes`，而且 `mlucas-avx2` 還在背景跑。要手動
`blanton_tr518.sh stop` + `kill`，否則下一輪任何測試都在被污染的狀態上開始
CLAUDE.md
+18 -2
View File
@@ -9,7 +9,7 @@ DUT 端的取數能力由一組 **bash 工具庫** 提供（CB FPGA `pcimem` →
完整架構見 [ARCHITECTURE.md](ARCHITECTURE.md)。
**目前狀態（2026-08-31）**：Script A 為 **V1.1.4**（A 集中記錄所有 TTL 的變更）。涵蓋
**目前狀態（2026-09-01）**：Script A 為 **V1.1.5**（A 集中記錄所有 TTL 的變更）。涵蓋
PCIe AER / DDR EDAC / PMON+TPM / 電壓 margin（9 顆 LTC2980）/ SWB loopback 線速流量 /
10G+1G 管理網路 ping / BMC DDR 與 USB / NVMe 健康，壓力層走平台的 `bgctl`。
switch unit 數量由 `config.ttl` 的 `SWB_UNIT0` / `SWB_UNIT1` 宣告，風扇轉速由 `FAN_SPEED` 指定
@@ -26,7 +26,7 @@ NFC tag 讀取由 `nfc_polling.sh` 背景輪詢（A 做基線、B 起、C 停並
另有 **`4_Blanton_Script_thermal_safety.ttl`**（熱 / 安規，**獨立跑不接 A→B→C**，滿載後每分鐘
取 PMON + 兩片 SWB 的軌功耗；**沒有收尾段**，中斷後要手動 `blanton_tr518.sh stop`）。
流程圖：`docs/Blanton_Test_Flow.drawio`。
最後一次發布是 **V1.1.3**；SWB 的 I2C 通道與位址已於 2026-08-19 上機驗證。
最後一次發布是 **V1.1.4**；SWB 的 I2C 通道與位址已於 2026-08-19 上機驗證。
margin 的 `VNOM` 已於 2026-08-30 改為 Blanton 實測中位數（144 條軌中 86 條上調 0.8~2.5%）。
交付用 `./publish/publish.sh` 打包。
@@ -117,6 +117,16 @@ bash ~/Blanton_Script/port_prbs_monitor.sh report # PASS/FAIL 統計（沒
bash ~/Blanton_Script/port_prbs_monitor.sh stop # 收尾會跑 prbsstat STOp + prbs clear
# ⚠️ PRBS 打起來時 link 會顯示 down，這是正常的 —— 所以 start 刻意不印 port status
# ── 多相 VRM margin（原生 i2c，38 條軌）──────────────
./Blanton_Script/blanton_multiphase_margin.sh high3 # 全部 +3%
./Blanton_Script/blanton_multiphase_margin.sh low3 # 全部 -3%
./Blanton_Script/blanton_multiphase_margin.sh comboA # 混合，組合 A
./Blanton_Script/blanton_multiphase_margin.sh comboB # 混合，組合 B
./Blanton_Script/blanton_multiphase_margin.sh save # ⚠️ 永久寫 NVM
# -u 0 / -u 1 單邊（SWB0=i2c-13/15，SWB1=i2c-14/16）；-n 只印指令
# 逐條印 SWB0_0V9_ANLG0 - 0.930V Configure Done；save 只印 Multiphase Save All
# ⚠️ 這不是 margin.sh 管的 LTC2980，兩支摸同一批軌，不要同時用
# ── 全機 SerDes BER（PRBS，期間 link 會顯示 DOWN）────
./Blanton_Script/blanton_ber.sh init # prbs set p=3 + prbs get（檢查每條 lane 鎖定）
./Blanton_Script/blanton_ber.sh start # prbsstat STArt Interval=30
@@ -222,6 +232,12 @@ Tera Term 連 COM port (115200-8-N-1)
- ⚠️ **ICB/PDB 一律走 VI2C（`blanton_icb_vi2c.sh`），不要走 VSPI**：VSPI ~18 ms/reg 會讓 I2C
byte 相間隔拉到 ~50 ms，踩中 SMBus 25–35 ms timeout，裝置直接 NACK。實測全掃 9.4 s vs 34.0 s。
- ⚠️ **I2C 讀一律 Repeated START**（不是 STOP + START），否則 PMBus/SMBus 裝置（VRM、EFUSE）不理。
- ⚠️ **`--runtime 86400` 是 24 小時上限**：超過一天的 soak，SSD / USB 壓力會安靜結束，
剩下的時間那兩項閒置。`bgctl list` 的數量變少是唯一的線索，**不會報警**
- ⚠️ **多相 VRM 與 LTC2980 是同一批軌的兩條路**：`blanton_multiphase_margin.sh`（原生 i2c）
和 `margin.sh`（LTC2980 PMBus）都假設自己是唯一寫入者，**沒有互斥檢查**，只靠人記得
- ⚠️ **traffic 的計數器基準在 v0.7.0 變了**：`tx 100 length=512` → `tx 200 length=324`，
每 burst 的位元組數 +27%。PASS/FAIL 是成對交叉比對不受影響，但**絕對值不能跟舊 log 比**
- ⚠️ **Script 4（thermal/safety）沒有收尾**：`while 1` 之後就是檔尾。中斷後 DUT 停在
`port cd lb=mac` / `l2 learn off` / `test mode nr=yes`，`mlucas-avx2` 也還在背景。
下一個測試會在被污染的狀態上開始，而且 **`show interfaces status` 看不出來**。
docs/release-notes/v1.1.5.md
+67
View File
@@ -0,0 +1,67 @@
# v1.1.5 — The stress jobs now last the whole soak
## 🐛 Bug fixes
**USB stress ran for sixty seconds of an overnight soak**
* `qfx5252-stress-usb` was started with `--runtime 60`. It finished a minute in and the USB path sat idle for the rest of the night. Nothing failed, nothing said so, and the run looked complete.
* SSD stress had the same shape at `--runtime 3600` — one hour of a soak that usually runs far longer.
* Both are now `--runtime 86400`, and the BMC DDR memtester lost its loop count (`64M 1` → `64M`) so it runs until it is stopped rather than finishing one pass.
* **86400 is 24 hours, not "forever".** A soak longer than a day leaves SSD and USB dead for the remainder. Script B prints `bgctl list` every round (since v1.0.10), so the shorter list is visible there — but nothing raises an alarm.
## ✨ New features
**Multiphase VRM margin**
* New `blanton_multiphase_margin.sh` drives the multiphase controllers on both switch boards over the native i2c buses — SWB0 on `/dev/i2c-13` and `-15`, SWB1 on `-14` and `-16`. 19 rails per board, 38 in all.
* `high3` / `low3` / `comboA` / `comboB` set the voltages and report one line per rail:
```
SWB0_0V9_ANLG0 - 0.930V Configure Done
SWB0_0V75_ANLG0 - 0.775V Configure Done
...
[ OK ] high3: 38 rail(s) configured
```
* `save` commits them. It has no per-rail mapping, so it reports as one operation: `Multiphase Save All`.
* `-u 0` / `-u 1` for a single board; rails belonging to the other board are skipped and counted separately, not failed.
* **`save` writes NVM permanently** (PMBus `STORE_USER_ALL`, and `0x17` on the TH6 core rail). A power cycle does not undo it.
* **These are not the LTC2980s that `margin.sh` drives.** The two tools reach the same rails from different sides and each assumes it is the only writer. There is no interlock — do not run both.
**Traffic bursts carry a random pattern**
* `blanton_traffic_linespeed` v0.7.0 appends `PatternRandom=yes` to every `tx`, `ce0` included. A fixed pattern can sit on a benign bit sequence for an entire run; a changing one is what makes a weak lane show itself.
* `-r no` forces the fixed pattern; `-r ""` leaves the argument off entirely, which is the pre-v0.7.0 wire format if a future SDK rejects it.
* Defaults change from `tx 100 length=512` to `tx 200 length=324`.
* **Counter totals are not comparable across this build**: 64800 bytes per burst instead of 51200, about 27% more. The PASS/FAIL cross-check compares a pair against each other and is unaffected — only absolute figures moved.
## 📦 Downloads
| File | Contents |
|---|---|
| `Script_ABC_Blanton_V1.1.5.zip` | The full Tera Term working directory, including `Blanton_Script/` to copy onto the DUT |
**After copying to the DUT:**
```bash
chmod +x ~/Blanton_Script/*.sh # see below
grep -rlU $'\r' ~/Blanton_Script # expect no output
```
`blanton_ber.sh`, `nfc_polling.sh`, `blanton_tr518.sh`, `blanton_multiphase_margin.sh` and the two `TH6_SWB*_power_readback.sh` are invoked through `./` or `~/`, so they need the execute bit along with `bmc_monitor.sh` and `usb_target.sh` — neither git nor a Windows/USB copy carries it reliably.
## ⚠️ Before you run
* **A soak longer than 24 hours needs the runtimes raised.** `--runtime 86400` is a ceiling; past it, SSD and USB are idle and only a shorter `bgctl list` hints at it.
* **`blanton_multiphase_margin.sh save` is permanent.** Read the rails back before committing, and never run it during a test.
* **Do not mix `blanton_multiphase_margin.sh` and `margin.sh`** — same rails, two different access paths, no interlock.
* **Traffic counters changed scale.** Any absolute thresholds taken from earlier logs need redoing.
* **Script 4 (thermal/safety) has no teardown** — finish with `blanton_tr518.sh stop` and `kill $(jobs -p)`.
* **These three cannot share the switch**: `blanton_ber.sh`, `blanton_tr518.sh`, `blanton_traffic_linespeed`.
* **Margin is only sampled at the start and end of a soak** (since v1.1.4), not during it.
* **`FAN_SPEED` is 100** — the fans run flat out unless you change `config.ttl`.
* **The three items listed as unverified in v1.1.0 are still unverified**: the `ce0` ingress mirror, the 120s settle in `blanton_tr518.sh`, and `test mode nr=no` on stop.
## 🔗 Links
* [Blanton_Test_Flow.drawio](https://etgit.et-wen.com/etwen/Blanton_TTL_Script/src/branch/main/docs/Blanton_Test_Flow.drawio) — the four scripts side by side
* [ARCHITECTURE.md](https://etgit.et-wen.com/etwen/Blanton_TTL_Script/src/branch/main/ARCHITECTURE.md) — test flow, data models, constraints
* [CLAUDE.md](https://etgit.et-wen.com/etwen/Blanton_TTL_Script/src/branch/main/CLAUDE.md) — commands and the bench gotchas
**Full changelog:** [V1.1.4...V1.1.5](https://etgit.et-wen.com/etwen/Blanton_TTL_Script/compare/V1.1.4...V1.1.5)
src/Script_ABC_Blanton/1_Blanton_Script_A.ttl
+34 -2
View File
@@ -1,7 +1,7 @@
; =============================================================================
; Script A for Blanton
; Version : V1.1.4
; Date : 2026-08-31
; Version : V1.1.5
; Date : 2026-09-01
; Author : ETWen
; =============================================================================
; Version History:
@@ -201,6 +201,38 @@
; finish - leaves the session shell first, so finish
; runs in the login shell that opened it
; docs/Blanton_Test_Flow.drawio Add the A/B/C + thermal flow diagram
; V1.1.5 2026-09-01 ScriptB Stress jobs now last the whole soak
; BMC DDR memtester 64M 1 -> 64M (loop count
; dropped = runs until stopped)
; SSD --runtime 3600 -> 86400
; USB --runtime 60 -> 86400
; The USB one finished after 60 SECONDS, so an
; overnight run had USB idle for all but the first
; minute and nothing said so
; !! 86400 is 24h: a soak longer than that leaves SSD
; and USB dead for the remainder - the per-round
; bgctl list (V1.0.10) is where that shows up
; Blanton_Script/blanton_multiphase_margin.sh Add multiphase VRM margin over the native i2c buses
; high3 / low3 / comboA / comboB / save, -u 0|1|all
; 38 rails (19 per SWB), one line each:
; SWB0_0V9_ANLG0 - 0.930V Configure Done
; save has no per-rail map, prints Multiphase Save All
; !! save is STORE_USER_ALL - permanent, survives a
; power cycle
; !! these are NOT the LTC2980s margin.sh drives; the
; two tools reach the same rails from different
; sides - do not run both
; Blanton_Script/blanton_traffic_linespeed.sh v0.7.0 tx gains PatternRandom, defaults change
; tx 100 length=512 -> tx 200 length=324
; every burst now ends PatternRandom=yes, ce0 included
; A fixed pattern can sit on a benign bit sequence for
; a whole run; random is what exposes a weak lane
; -r no forces the fixed pattern, -r "" omits the
; argument entirely (pre-v0.7.0 wire format)
; !! bytes per burst went 51200 -> 64800 (+27%), so
; counter totals are not comparable across this
; build - the PASS/FAIL cross-check is unaffected
; tools/Multiphase_*.txt Bench command references for the new script
; =============================================================================
include "config.ttl"
src/Script_ABC_Blanton/2_Blanton_Script_B.ttl
+4 -3
View File
@@ -26,7 +26,8 @@ sendln "~/hammer/tools/amd/mlucas-avx2 -s l -cpu 0:15 > ~/hammer/tools/amd/mluca
;wait prompt_sonic_root
;sendln "./Blanton_Script/bmc_monitor.sh start"
wait prompt_sonic_root
sendln "bgctl run bmc-manager run '/usr/bin/memtester 64M 1'"
;sendln "bgctl run bmc-manager run '/usr/bin/memtester 64M 1'"
sendln "bgctl run bmc-manager run '/usr/bin/memtester 64M'" ; Continue Execture
; ========== BMC Monitor Test ==========
wait prompt_sonic_root
@@ -40,7 +41,7 @@ sendln "bgctl run /usr/sbin/memtester 1G" ; Continue Execture
; ========== SSD read/write ==========
wait prompt_sonic_root
sendln "bgctl run qfx5252-stress-ssd 1G --runtime 3600 --passes 5 --write --force --log /host/hw-eval/jobs/qfx5252-stress-ssd.log"
sendln "bgctl run qfx5252-stress-ssd 1G --runtime 86400 --passes 5 --write --force --log /host/hw-eval/jobs/qfx5252-stress-ssd.log"
; ========== USB read/write ==========
; ---- Get USB partition node -> usb_dev ----
@@ -51,7 +52,7 @@ waitregex '<<DEV=([^>]*)>>'
usb_dev = groupmatchstr1
wait prompt_sonic_root
sprintf2 cmd "bgctl run qfx5252-stress-usb %s 256M --runtime 60 --passes 1 --write --log /host/hw-eval/jobs/qfx5252-stress-usb.log" usb_dev
sprintf2 cmd "bgctl run qfx5252-stress-usb %s 256M --runtime 86400 --passes 1 --write --log /host/hw-eval/jobs/qfx5252-stress-usb.log" usb_dev
sendln cmd
;wait prompt_sonic_root
src/Script_ABC_Blanton/Blanton_Script/blanton_multiphase_margin.sh
+1047
View File
File diff suppressed because it is too large Load Diff
src/Script_ABC_Blanton/Blanton_Script/blanton_traffic_linespeed.sh
+38 -10
View File
@@ -6,7 +6,7 @@
# V0.1.0 2026-08-17 First version. Bash port of the three Tera Term macros
# utils/traffic_loopback_vlan_setting.ttl (VLAN 30..137,
# port pair cdN <-> cdN+32), utils/traffic_loopback_start.ttl
# (tx 100 length=512 VLantag=<vid>) and
# (tx <count> length=<len> VLantag=<vid>) and
# utils/traffic_loopback_vlan_remove.ttl.
# One DUT = two switch boards -> bcmcmd unit 0 and 1
# (bcmcmd -n <unit>), default both.
@@ -90,6 +90,16 @@
# With only one unit selected the summary reports
# UNDECIDED (exit 3) instead of guessing.
# TL_CE_ENABLE=0 restores the old cd-pairs-only behaviour.
# V0.7.0 2026-09-01 Change: tx bursts carry PatternRandom=yes and the defaults
# become tx 200 length=324 (were 100 / 512).
# Random payload keeps the bit pattern changing instead of
# repeating, which is what makes a marginal lane show up;
# a fixed pattern can sit on a benign sequence all run.
# TL_TX_RANDOM=no forces the fixed pattern, "" leaves the
# argument off entirely (pre-V0.7.0 wire format).
# NOTE: counters scale with count x length, so totals from
# before this build are not comparable - 200x324 moves
# about 27% more bytes per burst than 100x512.
# V0.6.0 2026-08-28 Add: ce0 traffic is now SUSTAINED, not a single burst.
# A cd pair keeps its packets circulating because they
# flood to the partner port; ce0 has no partner and a
@@ -142,6 +152,8 @@
# aliases: -tx | --tx
# -l|--length <n> tx packet length (default $TL_TX_LENGTH)
# aliases: -length | --len
# -r|--random <yes|no> tx PatternRandom (default $TL_TX_RANDOM;
# empty string omits the argument)
# -p|--ports <list|all> ps: port list ('all' = plain 'ps', every port)
# -T|--tolerance <n> report: allowed |delta| in packets (default 0;
# -T 1 absorbs the normal snapshot skew)
@@ -161,7 +173,8 @@
# -h|--help help
#
# Environment overrides:
# BCMCMD_CMD=bcmcmd TL_UNITS="0 1" TL_TX_COUNT=100 TL_TX_LENGTH=512
# BCMCMD_CMD=bcmcmd TL_UNITS="0 1" TL_TX_COUNT=200 TL_TX_LENGTH=324
# TL_TX_RANDOM=yes
# TL_PS_PORTS="1-24,40-96,..." TL_TOLERANCE=0 TL_LOG_DIR=/tmp
# DEBUG_MODE=1
#
@@ -173,8 +186,14 @@
# === Config ==================================================================
BCMCMD_CMD="${BCMCMD_CMD:-bcmcmd}"
TL_UNITS="${TL_UNITS:-0 1}" # one DUT = two switch boards (0 and 1)
TL_TX_COUNT="${TL_TX_COUNT:-100}"
TL_TX_LENGTH="${TL_TX_LENGTH:-512}"
TL_TX_COUNT="${TL_TX_COUNT:-200}"
TL_TX_LENGTH="${TL_TX_LENGTH:-324}"
# PatternRandom=yes|no is appended to every tx burst. Random payload exercises
# the SerDes with changing bit patterns instead of the repeating one a fixed
# pattern produces, which is what makes a marginal lane show up.
# Set to "" to leave the argument off entirely (pre-V0.7.0 behaviour).
TL_TX_RANDOM="${TL_TX_RANDOM:-yes}"
TL_DEFAULT_VLAN="${TL_DEFAULT_VLAN:-1}"
TL_DEFAULT_VLAN_PBM="${TL_DEFAULT_VLAN_PBM:-cd}"
@@ -515,17 +534,23 @@ traffic_linespeed_start() {
_tl_units_check || return 1
_tl_is_uint "$TL_TX_COUNT" || { _tl_err "tx count '$TL_TX_COUNT' is not a positive integer (-tx|-c <n>)"; return 1; }
_tl_is_uint "$TL_TX_LENGTH" || { _tl_err "tx length '$TL_TX_LENGTH' is not a positive integer (-length|-l <n>)"; return 1; }
local rnd=""
case "$TL_TX_RANDOM" in
yes|no) rnd=" PatternRandom=$TL_TX_RANDOM" ;;
"") rnd="" ;;
*) _tl_err "PatternRandom '$TL_TX_RANDOM' must be yes, no or empty (-r|--random)"; return 1 ;;
esac
local unit vid pa pb n fail
for unit in $TL_UNITS; do
n=0; fail=0
_tl_info "unit $unit: tx $TL_TX_COUNT length=$TL_TX_LENGTH per VLAN 30..137"
_tl_info "unit $unit: tx $TL_TX_COUNT length=$TL_TX_LENGTH${rnd} per VLAN 30..137"
while read -r vid pa pb <&3; do
[ -z "$vid" ] && continue
_tl_bcm_q "$unit" "tx $TL_TX_COUNT length=$TL_TX_LENGTH VLantag=$vid" || fail=$((fail+1))
_tl_bcm_q "$unit" "tx $TL_TX_COUNT length=$TL_TX_LENGTH VLantag=$vid${rnd}" || fail=$((fail+1))
n=$((n+1))
done 3<<< "$TL_PAIRS"
if [ "$TL_CE_ENABLE" = "1" ]; then
_tl_bcm_q "$unit" "tx $TL_TX_COUNT length=$TL_TX_LENGTH VLantag=$TL_CE_VLAN" || fail=$((fail+1))
_tl_bcm_q "$unit" "tx $TL_TX_COUNT length=$TL_TX_LENGTH VLantag=$TL_CE_VLAN${rnd}" || fail=$((fail+1))
n=$((n+1))
fi
if [ "$fail" -eq 0 ]; then
@@ -949,7 +974,7 @@ traffic_linespeed_run() {
blanton_traffic_linespeed_help() {
echo -e "\033[1mblanton_traffic_linespeed.sh - SWB loopback line-speed traffic (bcmcmd)\033[0m"
echo ""
echo -e " Units: \033[36m$TL_UNITS\033[0m tx: \033[36m$TL_TX_COUNT pkt x ${TL_TX_LENGTH}B\033[0m"
echo -e " Units: \033[36m$TL_UNITS\033[0m tx: \033[36m$TL_TX_COUNT pkt x ${TL_TX_LENGTH}B\033[0m PatternRandom: \033[36m${TL_TX_RANDOM:-（不加）}\033[0m"
echo -e " VLANs: 30..137 ($(_tl_pair_count) loopback pairs, cdN <-> cdN+32)"
[ "$TL_CE_ENABLE" = "1" ] && \
echo -e " 100G : VLAN \033[36m$TL_CE_VLAN\033[0m port \033[36m$TL_CE_PORT\033[0m mode=\033[36m$TL_CE_MODE\033[0m (cross = unit0.$TL_CE_PORT <-> unit1.$TL_CE_PORT cabled)"
@@ -958,7 +983,7 @@ blanton_traffic_linespeed_help() {
echo -e " \033[33minit\033[0m step 1 vlan remove 1 pbm=cd, vlan create/add each pair"
echo -e " \033[33mclear\033[0m step 2 clear c"
echo -e " \033[33mshow\033[0m step 3/6 show c (run before and after traffic)"
echo -e " \033[33mstart\033[0m step 4 tx <count> length=<len> VLantag=<vid> per VLAN"
echo -e " \033[33mstart\033[0m step 4 tx <count> length=<len> VLantag=<vid> [PatternRandom=<yes|no>] per VLAN"
echo -e " \033[33mstop\033[0m step 5 vlan remove <vid> pbm=<pair> [--destroy also destroys]"
[ "$TL_CE_ENABLE" = "1" ] && [ "$TL_CE_MIRROR" = "1" ] && \
echo -e " \033[33m^ also turns the $TL_CE_PORT mirror off -- without it the 100G loop keeps running\033[0m"
@@ -972,6 +997,7 @@ blanton_traffic_linespeed_help() {
echo -e " \033[33m-u|--unit\033[0m <0|1|all> bcmcmd unit(s); 'all' = 0 1 (default: $TL_UNITS)"
echo -e " \033[33m-c|--count|-tx\033[0m <n> tx packet count (default $TL_TX_COUNT)"
echo -e " \033[33m-l|--length|-length\033[0m <n> tx packet length (default $TL_TX_LENGTH)"
echo -e " \033[33m-r|--random\033[0m <yes|no> tx PatternRandom (default $TL_TX_RANDOM; \"\" 完全不加)"
echo -e " \033[33m-p|--ports\033[0m <list> ps port list, or 'all' for every port"
echo -e " \033[33m-T|--tolerance\033[0m <n> report: allowed |delta| pkts (default $TL_TOLERANCE; -T 1 = snapshot skew)"
echo -e " \033[33m-a|--all\033[0m report: kept for compatibility (all pairs are listed)"
@@ -995,7 +1021,8 @@ blanton_traffic_linespeed_help() {
echo -e " blanton_traffic_linespeed report -u 1 -q | grep -v PASS"
echo -e " blanton_traffic_linespeed report -f /tmp/showc_unit1_*.log -a"
echo -e " blanton_traffic_linespeed show -u 1 | grep -iE 'error|discard|drop'"
echo -e " blanton_traffic_linespeed start -u 0 -tx 100 -length 512"
echo -e " blanton_traffic_linespeed start -u 0 -tx 200 -length 324"
echo -e " blanton_traffic_linespeed start -r no # 固定樣式，不隨機"
echo -e " blanton_traffic_linespeed start -tx 100000 -length 9216 -d"
echo -e " blanton_traffic_linespeed stop --destroy"
echo ""
@@ -1019,6 +1046,7 @@ blanton_traffic_linespeed() {
shift 2 ;;
-c|--count|-tx|--tx) TL_TX_COUNT="$2"; shift 2 ;;
-l|-length|--length|--len) TL_TX_LENGTH="$2"; shift 2 ;;
-r|--random|-PatternRandom|--pattern-random) TL_TX_RANDOM="$2"; shift 2 ;;
-p|--ports) TL_PS_PORTS="$2"; shift 2 ;;
-T|--tolerance) TL_TOLERANCE="$2"; shift 2 ;;
-f|--file) TL_REPORT_FILE="$2"; shift 2 ;;
tools/Multiphase_Netname
+40
View File
@@ -0,0 +1,40 @@
SWB0_0V9_ANLG0
SWB0_0V9_ANLG1
SWB0_0V75_ANLG0
SWB0_0V75_ANLG1
SWB0_PHYTILE_P0
SWB0_PHYTILE_P1
SWB0_PHYTILE_P2
SWB0_PHYTILE_P3
SWB0_PHYTILE_P4
SWB0_PHYTILE_P5
SWB0_PHYTILE_P6
SWB0_PHYTILE_P7
SWB0_PVDD1V5_CNDR0
SWB0_PVDD1V5_CNDR1
SWB0_PVDDA_PHYT0
SWB0_PVDDA_PHYT1
SWB0_PVDDA_PHYT2
SWB0_PVDDA_PHYT3
SWB0_TH6_CORE
SWB1_0V9_ANLG0
SWB1_0V9_ANLG1
SWB1_0V75_ANLG0
SWB1_0V75_ANLG1
SWB1_PHYTILE_P0
SWB1_PHYTILE_P1
SWB1_PHYTILE_P2
SWB1_PHYTILE_P3
SWB1_PHYTILE_P4
SWB1_PHYTILE_P5
SWB1_PHYTILE_P6
SWB1_PHYTILE_P7
SWB1_PVDD1V5_CNDR0
SWB1_PVDD1V5_CNDR1
SWB1_PVDDA_PHYT0
SWB1_PVDDA_PHYT1
SWB1_PVDDA_PHYT2
SWB1_PVDDA_PHYT3
SWB1_TH6_CORE
tools/Multiphase_Save.txt
+48
View File
@@ -0,0 +1,48 @@
i2cset -f -y 13 0x25 0x00 0
i2cset -f -y 13 0x25 0x15
i2cset -f -y 15 0x26 0x00 0
i2cset -f -y 15 0x26 0x15
i2cset -f -y 13 0x25 0x00 0
i2cset -f -y 13 0x25 0x15
i2cset -f -y 15 0x26 0x00 0
i2cset -f -y 15 0x26 0x15
i2cset -f -y 13 0x21 0x00 0
i2cset -f -y 13 0x21 0x15
i2cset -f -y 13 0x22 0x00 0
i2cset -f -y 13 0x22 0x15
i2cset -f -y 15 0x23 0x00 0
i2cset -f -y 15 0x23 0x15
i2cset -f -y 15 0x24 0x00 0
i2cset -f -y 15 0x24 0x15
i2cset -f -y 13 0x29 0x00 0
i2cset -f -y 13 0x29 0x15
i2cset -f -y 13 0x27 0x00 0
i2cset -f -y 13 0x27 0x15
i2cset -f -y 15 0x28 0x00 0
i2cset -f -y 15 0x28 0x15
i2cset -f -y 13 0x20 0x00 0
i2cset -f -y 13 0x20 0x17
i2cset -f -y 14 0x25 0x00 0
i2cset -f -y 14 0x25 0x15
i2cset -f -y 16 0x26 0x00 0
i2cset -f -y 16 0x26 0x15
i2cset -f -y 14 0x25 0x00 0
i2cset -f -y 14 0x25 0x15
i2cset -f -y 16 0x26 0x00 0
i2cset -f -y 16 0x26 0x15
i2cset -f -y 14 0x21 0x00 0
i2cset -f -y 14 0x21 0x15
i2cset -f -y 14 0x22 0x00 0
i2cset -f -y 14 0x22 0x15
i2cset -f -y 16 0x23 0x00 0
i2cset -f -y 16 0x23 0x15
i2cset -f -y 16 0x24 0x00 0
i2cset -f -y 16 0x24 0x15
i2cset -f -y 14 0x29 0x00 0
i2cset -f -y 14 0x29 0x15
i2cset -f -y 14 0x27 0x00 0
i2cset -f -y 14 0x27 0x15
i2cset -f -y 16 0x28 0x00 0
i2cset -f -y 16 0x28 0x15
i2cset -f -y 14 0x20 0x00 0
i2cset -f -y 14 0x20 0x17
tools/Multiphase_comboA.txt
+188
View File
@@ -0,0 +1,188 @@
//0.930V
i2cset -f -y 13 0x25 0x00 0
i2ctransfer -f -y 13 w3@0x25 0x21 0x89 0x00
i2cset -f -y 13 0x25 0x00 2
i2ctransfer -f -y 13 w3@0x25 0x0D 0x34 0x11
//0.930V
i2cset -f -y 15 0x26 0x00 0
i2ctransfer -f -y 15 w3@0x26 0x21 0x89 0x00
i2cset -f -y 15 0x26 0x00 2
i2ctransfer -f -y 15 w3@0x26 0x0D 0x34 0x11
//0.725V
i2cset -f -y 13 0x25 0x00 1
i2ctransfer -f -y 13 w3@0x25 0x21 0x60 0x00
i2cset -f -y 13 0x25 0x00 2
i2ctransfer -f -y 13 w3@0x25 0x1D 0x0A 0x06
//0.725V
i2cset -f -y 15 0x26 0x00 1
i2ctransfer -f -y 15 w3@0x26 0x21 0x60 0x00
i2cset -f -y 15 0x26 0x00 2
i2ctransfer -f -y 15 w3@0x26 0x1D 0x0A 0x06
//0.725V
i2cset -f -y 13 0x21 0x00 0
i2ctransfer -f -y 13 w3@0x21 0x21 0x60 0x00
i2cset -f -y 13 0x21 0x00 2
i2ctransfer -f -y 13 w3@0x21 0x0D 0x12 0x0C
//0.725V
i2cset -f -y 13 0x21 0x00 1
i2ctransfer -f -y 13 w3@0x21 0x21 0x60 0x00
i2cset -f -y 13 0x21 0x00 2
i2ctransfer -f -y 13 w3@0x21 0x1D 0x0A 0x06
//0.725V
i2cset -f -y 13 0x22 0x00 0
i2ctransfer -f -y 13 w3@0x22 0x21 0x60 0x00
i2cset -f -y 13 0x22 0x00 2
i2ctransfer -f -y 13 w3@0x22 0x0D 0x12 0x0C
//0.725V
i2cset -f -y 13 0x22 0x00 1
i2ctransfer -f -y 13 w3@0x22 0x21 0x60 0x00
i2cset -f -y 13 0x22 0x00 2
i2ctransfer -f -y 13 w3@0x22 0x1D 0x0A 0x06
//0.725V
i2cset -f -y 15 0x23 0x00 0
i2ctransfer -f -y 15 w3@0x23 0x21 0x60 0x00
i2cset -f -y 15 0x23 0x00 2
i2ctransfer -f -y 15 w3@0x23 0x0D 0x12 0x0C
//0.725V
i2cset -f -y 15 0x23 0x00 1
i2ctransfer -f -y 15 w3@0x23 0x21 0x60 0x00
i2cset -f -y 15 0x23 0x00 2
i2ctransfer -f -y 15 w3@0x23 0x1D 0x0A 0x06
//0.725V
i2cset -f -y 15 0x24 0x00 0
i2ctransfer -f -y 15 w3@0x24 0x21 0x60 0x00
i2cset -f -y 15 0x24 0x00 2
i2ctransfer -f -y 15 w3@0x24 0x0D 0x12 0x0C
//0.725V
i2cset -f -y 15 0x24 0x00 1
i2ctransfer -f -y 15 w3@0x24 0x21 0x60 0x00
i2cset -f -y 15 0x24 0x00 2
i2ctransfer -f -y 15 w3@0x24 0x1D 0x0A 0x06
//1.545V
i2cset -f -y 13 0x29 0x00 0
i2ctransfer -f -y 13 w3@0x29 0x21 0x04 0x01
i2cset -f -y 13 0x29 0x00 2
i2ctransfer -f -y 13 w3@0x29 0x0D 0x91 0x20
//1.545V
i2cset -f -y 13 0x29 0x00 1
i2ctransfer -f -y 13 w3@0x29 0x21 0x04 0x01
i2cset -f -y 13 0x29 0x00 2
i2ctransfer -f -y 13 w3@0x29 0x1D 0x49 0x10
//0.745V
i2cset -f -y 13 0x27 0x00 0
i2ctransfer -f -y 13 w3@0x27 0x21 0x64 0x00
i2cset -f -y 13 0x27 0x00 2
i2ctransfer -f -y 13 w3@0x27 0x0D 0x94 0x0C
//0.745V
i2cset -f -y 13 0x27 0x00 1
i2ctransfer -f -y 13 w3@0x27 0x21 0x64 0x00
i2cset -f -y 13 0x27 0x00 2
i2ctransfer -f -y 13 w3@0x27 0x1D 0x4C 0x06
//0.745V
i2cset -f -y 15 0x28 0x00 0
i2ctransfer -f -y 15 w3@0x28 0x21 0x64 0x00
i2cset -f -y 15 0x28 0x00 2
i2ctransfer -f -y 15 w3@0x28 0x0D 0x94 0x0C
//0.745V
i2cset -f -y 15 0x28 0x00 1
i2ctransfer -f -y 15 w3@0x28 0x21 0x64 0x00
i2cset -f -y 15 0x28 0x00 2
i2ctransfer -f -y 15 w3@0x28 0x1D 0x4C 0x06
//0.885V
i2cset -f -y 13 0x20 0x00 0
i2ctransfer -f -y 13 w3@0x20 0x21 0x62 0x01
//0.930V
i2cset -f -y 14 0x25 0x00 0
i2ctransfer -f -y 14 w3@0x25 0x21 0x89 0x00
i2cset -f -y 14 0x25 0x00 2
i2ctransfer -f -y 14 w3@0x25 0x0D 0x34 0x11
//0.930V
i2cset -f -y 16 0x26 0x00 0
i2ctransfer -f -y 16 w3@0x26 0x21 0x89 0x00
i2cset -f -y 16 0x26 0x00 2
i2ctransfer -f -y 16 w3@0x26 0x0D 0x34 0x11
//0.725V
i2cset -f -y 14 0x25 0x00 1
i2ctransfer -f -y 14 w3@0x25 0x21 0x60 0x00
i2cset -f -y 14 0x25 0x00 2
i2ctransfer -f -y 14 w3@0x25 0x1D 0x0A 0x06
//0.725V
i2cset -f -y 16 0x26 0x00 1
i2ctransfer -f -y 16 w3@0x26 0x21 0x60 0x00
i2cset -f -y 16 0x26 0x00 2
i2ctransfer -f -y 16 w3@0x26 0x1D 0x0A 0x06
//0.725V
i2cset -f -y 14 0x21 0x00 0
i2ctransfer -f -y 14 w3@0x21 0x21 0x60 0x00
i2cset -f -y 14 0x21 0x00 2
i2ctransfer -f -y 14 w3@0x21 0x0D 0x12 0x0C
//0.725V
i2cset -f -y 14 0x21 0x00 1
i2ctransfer -f -y 14 w3@0x21 0x21 0x60 0x00
i2cset -f -y 14 0x21 0x00 2
i2ctransfer -f -y 14 w3@0x21 0x1D 0x0A 0x06
//0.725V
i2cset -f -y 14 0x22 0x00 0
i2ctransfer -f -y 14 w3@0x22 0x21 0x60 0x00
i2cset -f -y 14 0x22 0x00 2
i2ctransfer -f -y 14 w3@0x22 0x0D 0x12 0x0C
//0.725V
i2cset -f -y 14 0x22 0x00 1
i2ctransfer -f -y 14 w3@0x22 0x21 0x60 0x00
i2cset -f -y 14 0x22 0x00 2
i2ctransfer -f -y 14 w3@0x22 0x1D 0x0A 0x06
//0.725V
i2cset -f -y 16 0x23 0x00 0
i2ctransfer -f -y 16 w3@0x23 0x21 0x60 0x00
i2cset -f -y 16 0x23 0x00 2
i2ctransfer -f -y 16 w3@0x23 0x0D 0x12 0x0C
//0.725V
i2cset -f -y 16 0x23 0x00 1
i2ctransfer -f -y 16 w3@0x23 0x21 0x60 0x00
i2cset -f -y 16 0x23 0x00 2
i2ctransfer -f -y 16 w3@0x23 0x1D 0x0A 0x06
//0.725V
i2cset -f -y 16 0x24 0x00 0
i2ctransfer -f -y 16 w3@0x24 0x21 0x60 0x00
i2cset -f -y 16 0x24 0x00 2
i2ctransfer -f -y 16 w3@0x24 0x0D 0x12 0x0C
//0.725V
i2cset -f -y 16 0x24 0x00 1
i2ctransfer -f -y 16 w3@0x24 0x21 0x60 0x00
i2cset -f -y 16 0x24 0x00 2
i2ctransfer -f -y 16 w3@0x24 0x1D 0x0A 0x06
//1.545V
i2cset -f -y 14 0x29 0x00 0
i2ctransfer -f -y 14 w3@0x29 0x21 0x04 0x01
i2cset -f -y 14 0x29 0x00 2
i2ctransfer -f -y 14 w3@0x29 0x0D 0x91 0x20
//1.545V
i2cset -f -y 14 0x29 0x00 1
i2ctransfer -f -y 14 w3@0x29 0x21 0x04 0x01
i2cset -f -y 14 0x29 0x00 2
i2ctransfer -f -y 14 w3@0x29 0x1D 0x49 0x10
//0.745V
i2cset -f -y 14 0x27 0x00 0
i2ctransfer -f -y 14 w3@0x27 0x21 0x64 0x00
i2cset -f -y 14 0x27 0x00 2
i2ctransfer -f -y 14 w3@0x27 0x0D 0x94 0x0C
//0.745V
i2cset -f -y 14 0x27 0x00 1
i2ctransfer -f -y 14 w3@0x27 0x21 0x64 0x00
i2cset -f -y 14 0x27 0x00 2
i2ctransfer -f -y 14 w3@0x27 0x1D 0x4C 0x06
//0.745V
i2cset -f -y 16 0x28 0x00 0
i2ctransfer -f -y 16 w3@0x28 0x21 0x64 0x00
i2cset -f -y 16 0x28 0x00 2
i2ctransfer -f -y 16 w3@0x28 0x0D 0x94 0x0C
//0.745V
i2cset -f -y 16 0x28 0x00 1
i2ctransfer -f -y 16 w3@0x28 0x21 0x64 0x00
i2cset -f -y 16 0x28 0x00 2
i2ctransfer -f -y 16 w3@0x28 0x1D 0x4C 0x06
//0.885V
i2cset -f -y 14 0x20 0x00 0
i2ctransfer -f -y 14 w3@0x20 0x21 0x62 0x01
tools/Multiphase_comboB.txt
+188
View File
@@ -0,0 +1,188 @@
//0.870V
i2cset -f -y 13 0x25 0x00 0
i2ctransfer -f -y 13 w3@0x25 0x21 0x7D 0x00
i2cset -f -y 13 0x25 0x00 2
i2ctransfer -f -y 13 w3@0x25 0x0D 0xB4 0x0F
//0.870V
i2cset -f -y 15 0x26 0x00 0
i2ctransfer -f -y 15 w3@0x26 0x21 0x7D 0x00
i2cset -f -y 15 0x26 0x00 2
i2ctransfer -f -y 15 w3@0x26 0x0D 0xB4 0x0F
//0.775V
i2cset -f -y 13 0x25 0x00 1
i2ctransfer -f -y 13 w3@0x25 0x21 0x6A 0x00
i2cset -f -y 13 0x25 0x00 2
i2ctransfer -f -y 13 w3@0x25 0x1D 0xAA 0x06
//0.775V
i2cset -f -y 15 0x26 0x00 1
i2ctransfer -f -y 15 w3@0x26 0x21 0x6A 0x00
i2cset -f -y 15 0x26 0x00 2
i2ctransfer -f -y 15 w3@0x26 0x1D 0xAA 0x06
//0.775V
i2cset -f -y 13 0x21 0x00 0
i2ctransfer -f -y 13 w3@0x21 0x21 0x6A 0x00
i2cset -f -y 13 0x21 0x00 2
i2ctransfer -f -y 13 w3@0x21 0x0D 0x52 0x0D
//0.775V
i2cset -f -y 13 0x21 0x00 1
i2ctransfer -f -y 13 w3@0x21 0x21 0x6A 0x00
i2cset -f -y 13 0x21 0x00 2
i2ctransfer -f -y 13 w3@0x21 0x1D 0xAA 0x06
//0.775V
i2cset -f -y 13 0x22 0x00 0
i2ctransfer -f -y 13 w3@0x22 0x21 0x6A 0x00
i2cset -f -y 13 0x22 0x00 2
i2ctransfer -f -y 13 w3@0x22 0x0D 0x52 0x0D
//0.775V
i2cset -f -y 13 0x22 0x00 1
i2ctransfer -f -y 13 w3@0x22 0x21 0x6A 0x00
i2cset -f -y 13 0x22 0x00 2
i2ctransfer -f -y 13 w3@0x22 0x1D 0xAA 0x06
//0.775V
i2cset -f -y 15 0x23 0x00 0
i2ctransfer -f -y 15 w3@0x23 0x21 0x6A 0x00
i2cset -f -y 15 0x23 0x00 2
i2ctransfer -f -y 15 w3@0x23 0x0D 0x52 0x0D
//0.775V
i2cset -f -y 15 0x23 0x00 1
i2ctransfer -f -y 15 w3@0x23 0x21 0x6A 0x00
i2cset -f -y 15 0x23 0x00 2
i2ctransfer -f -y 15 w3@0x23 0x1D 0xAA 0x06
//0.775V
i2cset -f -y 15 0x24 0x00 0
i2ctransfer -f -y 15 w3@0x24 0x21 0x6A 0x00
i2cset -f -y 15 0x24 0x00 2
i2ctransfer -f -y 15 w3@0x24 0x0D 0x52 0x0D
//0.775V
i2cset -f -y 15 0x24 0x00 1
i2ctransfer -f -y 15 w3@0x24 0x21 0x6A 0x00
i2cset -f -y 15 0x24 0x00 2
i2ctransfer -f -y 15 w3@0x24 0x1D 0xAA 0x06
//1.455V
i2cset -f -y 13 0x29 0x00 0
i2ctransfer -f -y 13 w3@0x29 0x21 0xF2 0x00
i2cset -f -y 13 0x29 0x00 2
i2ctransfer -f -y 13 w3@0x29 0x0D 0x51 0x1E
//1.455V
i2cset -f -y 13 0x29 0x00 1
i2ctransfer -f -y 13 w3@0x29 0x21 0xF2 0x00
i2cset -f -y 13 0x29 0x00 2
i2ctransfer -f -y 13 w3@0x29 0x1D 0x29 0x0F
//0.695V
i2cset -f -y 13 0x27 0x00 0
i2ctransfer -f -y 13 w3@0x27 0x21 0x5A 0x00
i2cset -f -y 13 0x27 0x00 2
i2ctransfer -f -y 13 w3@0x27 0x0D 0x54 0x0B
//0.695V
i2cset -f -y 13 0x27 0x00 1
i2ctransfer -f -y 13 w3@0x27 0x21 0x5A 0x00
i2cset -f -y 13 0x27 0x00 2
i2ctransfer -f -y 13 w3@0x27 0x1D 0xAC 0x05
//0.695V
i2cset -f -y 15 0x28 0x00 0
i2ctransfer -f -y 15 w3@0x28 0x21 0x5A 0x00
i2cset -f -y 15 0x28 0x00 2
i2ctransfer -f -y 15 w3@0x28 0x0D 0x54 0x0B
//0.695V
i2cset -f -y 15 0x28 0x00 1
i2ctransfer -f -y 15 w3@0x28 0x21 0x5A 0x00
i2cset -f -y 15 0x28 0x00 2
i2ctransfer -f -y 15 w3@0x28 0x1D 0xAC 0x05
//0.753V
i2cset -f -y 13 0x20 0x00 0
i2ctransfer -f -y 13 w3@0x20 0x21 0x2D 0x01
//0.870V
i2cset -f -y 14 0x25 0x00 0
i2ctransfer -f -y 14 w3@0x25 0x21 0x7D 0x00
i2cset -f -y 14 0x25 0x00 2
i2ctransfer -f -y 14 w3@0x25 0x0D 0xB4 0x0F
//0.870V
i2cset -f -y 16 0x26 0x00 0
i2ctransfer -f -y 16 w3@0x26 0x21 0x7D 0x00
i2cset -f -y 16 0x26 0x00 2
i2ctransfer -f -y 16 w3@0x26 0x0D 0xB4 0x0F
//0.775V
i2cset -f -y 14 0x25 0x00 1
i2ctransfer -f -y 14 w3@0x25 0x21 0x6A 0x00
i2cset -f -y 14 0x25 0x00 2
i2ctransfer -f -y 14 w3@0x25 0x1D 0xAA 0x06
//0.775V
i2cset -f -y 16 0x26 0x00 1
i2ctransfer -f -y 16 w3@0x26 0x21 0x6A 0x00
i2cset -f -y 16 0x26 0x00 2
i2ctransfer -f -y 16 w3@0x26 0x1D 0xAA 0x06
//0.775V
i2cset -f -y 14 0x21 0x00 0
i2ctransfer -f -y 14 w3@0x21 0x21 0x6A 0x00
i2cset -f -y 14 0x21 0x00 2
i2ctransfer -f -y 14 w3@0x21 0x0D 0x52 0x0D
//0.775V
i2cset -f -y 14 0x21 0x00 1
i2ctransfer -f -y 14 w3@0x21 0x21 0x6A 0x00
i2cset -f -y 14 0x21 0x00 2
i2ctransfer -f -y 14 w3@0x21 0x1D 0xAA 0x06
//0.775V
i2cset -f -y 14 0x22 0x00 0
i2ctransfer -f -y 14 w3@0x22 0x21 0x6A 0x00
i2cset -f -y 14 0x22 0x00 2
i2ctransfer -f -y 14 w3@0x22 0x0D 0x52 0x0D
//0.775V
i2cset -f -y 14 0x22 0x00 1
i2ctransfer -f -y 14 w3@0x22 0x21 0x6A 0x00
i2cset -f -y 14 0x22 0x00 2
i2ctransfer -f -y 14 w3@0x22 0x1D 0xAA 0x06
//0.775V
i2cset -f -y 16 0x23 0x00 0
i2ctransfer -f -y 16 w3@0x23 0x21 0x6A 0x00
i2cset -f -y 16 0x23 0x00 2
i2ctransfer -f -y 16 w3@0x23 0x0D 0x52 0x0D
//0.775V
i2cset -f -y 16 0x23 0x00 1
i2ctransfer -f -y 16 w3@0x23 0x21 0x6A 0x00
i2cset -f -y 16 0x23 0x00 2
i2ctransfer -f -y 16 w3@0x23 0x1D 0xAA 0x06
//0.775V
i2cset -f -y 16 0x24 0x00 0
i2ctransfer -f -y 16 w3@0x24 0x21 0x6A 0x00
i2cset -f -y 16 0x24 0x00 2
i2ctransfer -f -y 16 w3@0x24 0x0D 0x52 0x0D
//0.775V
i2cset -f -y 16 0x24 0x00 1
i2ctransfer -f -y 16 w3@0x24 0x21 0x6A 0x00
i2cset -f -y 16 0x24 0x00 2
i2ctransfer -f -y 16 w3@0x24 0x1D 0xAA 0x06
//1.455V
i2cset -f -y 14 0x29 0x00 0
i2ctransfer -f -y 14 w3@0x29 0x21 0xF2 0x00
i2cset -f -y 14 0x29 0x00 2
i2ctransfer -f -y 14 w3@0x29 0x0D 0x51 0x1E
//1.455V
i2cset -f -y 14 0x29 0x00 1
i2ctransfer -f -y 14 w3@0x29 0x21 0xF2 0x00
i2cset -f -y 14 0x29 0x00 2
i2ctransfer -f -y 14 w3@0x29 0x1D 0x29 0x0F
//0.695V
i2cset -f -y 14 0x27 0x00 0
i2ctransfer -f -y 14 w3@0x27 0x21 0x5A 0x00
i2cset -f -y 14 0x27 0x00 2
i2ctransfer -f -y 14 w3@0x27 0x0D 0x54 0x0B
//0.695V
i2cset -f -y 14 0x27 0x00 1
i2ctransfer -f -y 14 w3@0x27 0x21 0x5A 0x00
i2cset -f -y 14 0x27 0x00 2
i2ctransfer -f -y 14 w3@0x27 0x1D 0xAC 0x05
//0.695V
i2cset -f -y 16 0x28 0x00 0
i2ctransfer -f -y 16 w3@0x28 0x21 0x5A 0x00
i2cset -f -y 16 0x28 0x00 2
i2ctransfer -f -y 16 w3@0x28 0x0D 0x54 0x0B
//0.695V
i2cset -f -y 16 0x28 0x00 1
i2ctransfer -f -y 16 w3@0x28 0x21 0x5A 0x00
i2cset -f -y 16 0x28 0x00 2
i2ctransfer -f -y 16 w3@0x28 0x1D 0xAC 0x05
//0.753V
i2cset -f -y 14 0x20 0x00 0
i2ctransfer -f -y 14 w3@0x20 0x21 0x2D 0x01
tools/Multiphase_high3.txt
+188
View File
@@ -0,0 +1,188 @@
//0.930V
i2cset -f -y 13 0x25 0x00 0
i2ctransfer -f -y 13 w3@0x25 0x21 0x89 0x00
i2cset -f -y 13 0x25 0x00 2
i2ctransfer -f -y 13 w3@0x25 0x0D 0x34 0x11
//0.930V
i2cset -f -y 15 0x26 0x00 0
i2ctransfer -f -y 15 w3@0x26 0x21 0x89 0x00
i2cset -f -y 15 0x26 0x00 2
i2ctransfer -f -y 15 w3@0x26 0x0D 0x34 0x11
//0.775V
i2cset -f -y 13 0x25 0x00 1
i2ctransfer -f -y 13 w3@0x25 0x21 0x6A 0x00
i2cset -f -y 13 0x25 0x00 2
i2ctransfer -f -y 13 w3@0x25 0x1D 0xAA 0x06
//0.775V
i2cset -f -y 15 0x26 0x00 1
i2ctransfer -f -y 15 w3@0x26 0x21 0x6A 0x00
i2cset -f -y 15 0x26 0x00 2
i2ctransfer -f -y 15 w3@0x26 0x1D 0xAA 0x06
//0.775V
i2cset -f -y 13 0x21 0x00 0
i2ctransfer -f -y 13 w3@0x21 0x21 0x6A 0x00
i2cset -f -y 13 0x21 0x00 2
i2ctransfer -f -y 13 w3@0x21 0x0D 0x52 0x0D
//0.775V
i2cset -f -y 13 0x21 0x00 1
i2ctransfer -f -y 13 w3@0x21 0x21 0x6A 0x00
i2cset -f -y 13 0x21 0x00 2
i2ctransfer -f -y 13 w3@0x21 0x1D 0xAA 0x06
//0.775V
i2cset -f -y 13 0x22 0x00 0
i2ctransfer -f -y 13 w3@0x22 0x21 0x6A 0x00
i2cset -f -y 13 0x22 0x00 2
i2ctransfer -f -y 13 w3@0x22 0x0D 0x52 0x0D
//0.775V
i2cset -f -y 13 0x22 0x00 1
i2ctransfer -f -y 13 w3@0x22 0x21 0x6A 0x00
i2cset -f -y 13 0x22 0x00 2
i2ctransfer -f -y 13 w3@0x22 0x1D 0xAA 0x06
//0.775V
i2cset -f -y 15 0x23 0x00 0
i2ctransfer -f -y 15 w3@0x23 0x21 0x6A 0x00
i2cset -f -y 15 0x23 0x00 2
i2ctransfer -f -y 15 w3@0x23 0x0D 0x52 0x0D
//0.775V
i2cset -f -y 15 0x23 0x00 1
i2ctransfer -f -y 15 w3@0x23 0x21 0x6A 0x00
i2cset -f -y 15 0x23 0x00 2
i2ctransfer -f -y 15 w3@0x23 0x1D 0xAA 0x06
//0.775V
i2cset -f -y 15 0x24 0x00 0
i2ctransfer -f -y 15 w3@0x24 0x21 0x6A 0x00
i2cset -f -y 15 0x24 0x00 2
i2ctransfer -f -y 15 w3@0x24 0x0D 0x52 0x0D
//0.775V
i2cset -f -y 15 0x24 0x00 1
i2ctransfer -f -y 15 w3@0x24 0x21 0x6A 0x00
i2cset -f -y 15 0x24 0x00 2
i2ctransfer -f -y 15 w3@0x24 0x1D 0xAA 0x06
//1.545V
i2cset -f -y 13 0x29 0x00 0
i2ctransfer -f -y 13 w3@0x29 0x21 0x04 0x01
i2cset -f -y 13 0x29 0x00 2
i2ctransfer -f -y 13 w3@0x29 0x0D 0x91 0x20
//1.545V
i2cset -f -y 13 0x29 0x00 1
i2ctransfer -f -y 13 w3@0x29 0x21 0x04 0x01
i2cset -f -y 13 0x29 0x00 2
i2ctransfer -f -y 13 w3@0x29 0x1D 0x49 0x10
//0.745V
i2cset -f -y 13 0x27 0x00 0
i2ctransfer -f -y 13 w3@0x27 0x21 0x64 0x00
i2cset -f -y 13 0x27 0x00 2
i2ctransfer -f -y 13 w3@0x27 0x0D 0x94 0x0C
//0.745V
i2cset -f -y 13 0x27 0x00 1
i2ctransfer -f -y 13 w3@0x27 0x21 0x64 0x00
i2cset -f -y 13 0x27 0x00 2
i2ctransfer -f -y 13 w3@0x27 0x1D 0x4C 0x06
//0.745V
i2cset -f -y 15 0x28 0x00 0
i2ctransfer -f -y 15 w3@0x28 0x21 0x64 0x00
i2cset -f -y 15 0x28 0x00 2
i2ctransfer -f -y 15 w3@0x28 0x0D 0x94 0x0C
//0.745V
i2cset -f -y 15 0x28 0x00 1
i2ctransfer -f -y 15 w3@0x28 0x21 0x64 0x00
i2cset -f -y 15 0x28 0x00 2
i2ctransfer -f -y 15 w3@0x28 0x1D 0x4C 0x06
//0.885V
i2cset -f -y 13 0x20 0x00 0
i2ctransfer -f -y 13 w3@0x20 0x21 0x62 0x01
//0.930V
i2cset -f -y 14 0x25 0x00 0
i2ctransfer -f -y 14 w3@0x25 0x21 0x89 0x00
i2cset -f -y 14 0x25 0x00 2
i2ctransfer -f -y 14 w3@0x25 0x0D 0x34 0x11
//0.930V
i2cset -f -y 16 0x26 0x00 0
i2ctransfer -f -y 16 w3@0x26 0x21 0x89 0x00
i2cset -f -y 16 0x26 0x00 2
i2ctransfer -f -y 16 w3@0x26 0x0D 0x34 0x11
//0.775V
i2cset -f -y 14 0x25 0x00 1
i2ctransfer -f -y 14 w3@0x25 0x21 0x6A 0x00
i2cset -f -y 14 0x25 0x00 2
i2ctransfer -f -y 14 w3@0x25 0x1D 0xAA 0x06
//0.775V
i2cset -f -y 16 0x26 0x00 1
i2ctransfer -f -y 16 w3@0x26 0x21 0x6A 0x00
i2cset -f -y 16 0x26 0x00 2
i2ctransfer -f -y 16 w3@0x26 0x1D 0xAA 0x06
//0.775V
i2cset -f -y 14 0x21 0x00 0
i2ctransfer -f -y 14 w3@0x21 0x21 0x6A 0x00
i2cset -f -y 14 0x21 0x00 2
i2ctransfer -f -y 14 w3@0x21 0x0D 0x52 0x0D
//0.775V
i2cset -f -y 14 0x21 0x00 1
i2ctransfer -f -y 14 w3@0x21 0x21 0x6A 0x00
i2cset -f -y 14 0x21 0x00 2
i2ctransfer -f -y 14 w3@0x21 0x1D 0xAA 0x06
//0.775V
i2cset -f -y 14 0x22 0x00 0
i2ctransfer -f -y 14 w3@0x22 0x21 0x6A 0x00
i2cset -f -y 14 0x22 0x00 2
i2ctransfer -f -y 14 w3@0x22 0x0D 0x52 0x0D
//0.775V
i2cset -f -y 14 0x22 0x00 1
i2ctransfer -f -y 14 w3@0x22 0x21 0x6A 0x00
i2cset -f -y 14 0x22 0x00 2
i2ctransfer -f -y 14 w3@0x22 0x1D 0xAA 0x06
//0.775V
i2cset -f -y 16 0x23 0x00 0
i2ctransfer -f -y 16 w3@0x23 0x21 0x6A 0x00
i2cset -f -y 16 0x23 0x00 2
i2ctransfer -f -y 16 w3@0x23 0x0D 0x52 0x0D
//0.775V
i2cset -f -y 16 0x23 0x00 1
i2ctransfer -f -y 16 w3@0x23 0x21 0x6A 0x00
i2cset -f -y 16 0x23 0x00 2
i2ctransfer -f -y 16 w3@0x23 0x1D 0xAA 0x06
//0.775V
i2cset -f -y 16 0x24 0x00 0
i2ctransfer -f -y 16 w3@0x24 0x21 0x6A 0x00
i2cset -f -y 16 0x24 0x00 2
i2ctransfer -f -y 16 w3@0x24 0x0D 0x52 0x0D
//0.775V
i2cset -f -y 16 0x24 0x00 1
i2ctransfer -f -y 16 w3@0x24 0x21 0x6A 0x00
i2cset -f -y 16 0x24 0x00 2
i2ctransfer -f -y 16 w3@0x24 0x1D 0xAA 0x06
//1.545V
i2cset -f -y 14 0x29 0x00 0
i2ctransfer -f -y 14 w3@0x29 0x21 0x04 0x01
i2cset -f -y 14 0x29 0x00 2
i2ctransfer -f -y 14 w3@0x29 0x0D 0x91 0x20
//1.545V
i2cset -f -y 14 0x29 0x00 1
i2ctransfer -f -y 14 w3@0x29 0x21 0x04 0x01
i2cset -f -y 14 0x29 0x00 2
i2ctransfer -f -y 14 w3@0x29 0x1D 0x49 0x10
//0.745V
i2cset -f -y 14 0x27 0x00 0
i2ctransfer -f -y 14 w3@0x27 0x21 0x64 0x00
i2cset -f -y 14 0x27 0x00 2
i2ctransfer -f -y 14 w3@0x27 0x0D 0x94 0x0C
//0.745V
i2cset -f -y 14 0x27 0x00 1
i2ctransfer -f -y 14 w3@0x27 0x21 0x64 0x00
i2cset -f -y 14 0x27 0x00 2
i2ctransfer -f -y 14 w3@0x27 0x1D 0x4C 0x06
//0.745V
i2cset -f -y 16 0x28 0x00 0
i2ctransfer -f -y 16 w3@0x28 0x21 0x64 0x00
i2cset -f -y 16 0x28 0x00 2
i2ctransfer -f -y 16 w3@0x28 0x0D 0x94 0x0C
//0.745V
i2cset -f -y 16 0x28 0x00 1
i2ctransfer -f -y 16 w3@0x28 0x21 0x64 0x00
i2cset -f -y 16 0x28 0x00 2
i2ctransfer -f -y 16 w3@0x28 0x1D 0x4C 0x06
//0.885V
i2cset -f -y 14 0x20 0x00 0
i2ctransfer -f -y 14 w3@0x20 0x21 0x62 0x01
tools/Multiphase_low3.txt
+188
View File
@@ -0,0 +1,188 @@
//0.870V
i2cset -f -y 13 0x25 0x00 0
i2ctransfer -f -y 13 w3@0x25 0x21 0x7D 0x00
i2cset -f -y 13 0x25 0x00 2
i2ctransfer -f -y 13 w3@0x25 0x0D 0xB4 0x0F
//0.870V
i2cset -f -y 15 0x26 0x00 0
i2ctransfer -f -y 15 w3@0x26 0x21 0x7D 0x00
i2cset -f -y 15 0x26 0x00 2
i2ctransfer -f -y 15 w3@0x26 0x0D 0xB4 0x0F
//0.725V
i2cset -f -y 13 0x25 0x00 1
i2ctransfer -f -y 13 w3@0x25 0x21 0x60 0x00
i2cset -f -y 13 0x25 0x00 2
i2ctransfer -f -y 13 w3@0x25 0x1D 0x0A 0x06
//0.725V
i2cset -f -y 15 0x26 0x00 1
i2ctransfer -f -y 15 w3@0x26 0x21 0x60 0x00
i2cset -f -y 15 0x26 0x00 2
i2ctransfer -f -y 15 w3@0x26 0x1D 0x0A 0x06
//0.725V
i2cset -f -y 13 0x21 0x00 0
i2ctransfer -f -y 13 w3@0x21 0x21 0x60 0x00
i2cset -f -y 13 0x21 0x00 2
i2ctransfer -f -y 13 w3@0x21 0x0D 0x12 0x0C
//0.725V
i2cset -f -y 13 0x21 0x00 1
i2ctransfer -f -y 13 w3@0x21 0x21 0x60 0x00
i2cset -f -y 13 0x21 0x00 2
i2ctransfer -f -y 13 w3@0x21 0x1D 0x0A 0x06
//0.725V
i2cset -f -y 13 0x22 0x00 0
i2ctransfer -f -y 13 w3@0x22 0x21 0x60 0x00
i2cset -f -y 13 0x22 0x00 2
i2ctransfer -f -y 13 w3@0x22 0x0D 0x12 0x0C
//0.725V
i2cset -f -y 13 0x22 0x00 1
i2ctransfer -f -y 13 w3@0x22 0x21 0x60 0x00
i2cset -f -y 13 0x22 0x00 2
i2ctransfer -f -y 13 w3@0x22 0x1D 0x0A 0x06
//0.725V
i2cset -f -y 15 0x23 0x00 0
i2ctransfer -f -y 15 w3@0x23 0x21 0x60 0x00
i2cset -f -y 15 0x23 0x00 2
i2ctransfer -f -y 15 w3@0x23 0x0D 0x12 0x0C
//0.725V
i2cset -f -y 15 0x23 0x00 1
i2ctransfer -f -y 15 w3@0x23 0x21 0x60 0x00
i2cset -f -y 15 0x23 0x00 2
i2ctransfer -f -y 15 w3@0x23 0x1D 0x0A 0x06
//0.725V
i2cset -f -y 15 0x24 0x00 0
i2ctransfer -f -y 15 w3@0x24 0x21 0x60 0x00
i2cset -f -y 15 0x24 0x00 2
i2ctransfer -f -y 15 w3@0x24 0x0D 0x12 0x0C
//0.725V
i2cset -f -y 15 0x24 0x00 1
i2ctransfer -f -y 15 w3@0x24 0x21 0x60 0x00
i2cset -f -y 15 0x24 0x00 2
i2ctransfer -f -y 15 w3@0x24 0x1D 0x0A 0x06
//1.455V
i2cset -f -y 13 0x29 0x00 0
i2ctransfer -f -y 13 w3@0x29 0x21 0xF2 0x00
i2cset -f -y 13 0x29 0x00 2
i2ctransfer -f -y 13 w3@0x29 0x0D 0x51 0x1E
//1.455V
i2cset -f -y 13 0x29 0x00 1
i2ctransfer -f -y 13 w3@0x29 0x21 0xF2 0x00
i2cset -f -y 13 0x29 0x00 2
i2ctransfer -f -y 13 w3@0x29 0x1D 0x29 0x0F
//0.695V
i2cset -f -y 13 0x27 0x00 0
i2ctransfer -f -y 13 w3@0x27 0x21 0x5A 0x00
i2cset -f -y 13 0x27 0x00 2
i2ctransfer -f -y 13 w3@0x27 0x0D 0x54 0x0B
//0.695V
i2cset -f -y 13 0x27 0x00 1
i2ctransfer -f -y 13 w3@0x27 0x21 0x5A 0x00
i2cset -f -y 13 0x27 0x00 2
i2ctransfer -f -y 13 w3@0x27 0x1D 0xAC 0x05
//0.695V
i2cset -f -y 15 0x28 0x00 0
i2ctransfer -f -y 15 w3@0x28 0x21 0x5A 0x00
i2cset -f -y 15 0x28 0x00 2
i2ctransfer -f -y 15 w3@0x28 0x0D 0x54 0x0B
//0.695V
i2cset -f -y 15 0x28 0x00 1
i2ctransfer -f -y 15 w3@0x28 0x21 0x5A 0x00
i2cset -f -y 15 0x28 0x00 2
i2ctransfer -f -y 15 w3@0x28 0x1D 0xAC 0x05
//0.753V
i2cset -f -y 13 0x20 0x00 0
i2ctransfer -f -y 13 w3@0x20 0x21 0x2D 0x01
//0.870V
i2cset -f -y 14 0x25 0x00 0
i2ctransfer -f -y 14 w3@0x25 0x21 0x7D 0x00
i2cset -f -y 14 0x25 0x00 2
i2ctransfer -f -y 14 w3@0x25 0x0D 0xB4 0x0F
//0.870V
i2cset -f -y 16 0x26 0x00 0
i2ctransfer -f -y 16 w3@0x26 0x21 0x7D 0x00
i2cset -f -y 16 0x26 0x00 2
i2ctransfer -f -y 16 w3@0x26 0x0D 0xB4 0x0F
//0.725V
i2cset -f -y 14 0x25 0x00 1
i2ctransfer -f -y 14 w3@0x25 0x21 0x60 0x00
i2cset -f -y 14 0x25 0x00 2
i2ctransfer -f -y 14 w3@0x25 0x1D 0x0A 0x06
//0.725V
i2cset -f -y 16 0x26 0x00 1
i2ctransfer -f -y 16 w3@0x26 0x21 0x60 0x00
i2cset -f -y 16 0x26 0x00 2
i2ctransfer -f -y 16 w3@0x26 0x1D 0x0A 0x06
//0.725V
i2cset -f -y 14 0x21 0x00 0
i2ctransfer -f -y 14 w3@0x21 0x21 0x60 0x00
i2cset -f -y 14 0x21 0x00 2
i2ctransfer -f -y 14 w3@0x21 0x0D 0x12 0x0C
//0.725V
i2cset -f -y 14 0x21 0x00 1
i2ctransfer -f -y 14 w3@0x21 0x21 0x60 0x00
i2cset -f -y 14 0x21 0x00 2
i2ctransfer -f -y 14 w3@0x21 0x1D 0x0A 0x06
//0.725V
i2cset -f -y 14 0x22 0x00 0
i2ctransfer -f -y 14 w3@0x22 0x21 0x60 0x00
i2cset -f -y 14 0x22 0x00 2
i2ctransfer -f -y 14 w3@0x22 0x0D 0x12 0x0C
//0.725V
i2cset -f -y 14 0x22 0x00 1
i2ctransfer -f -y 14 w3@0x22 0x21 0x60 0x00
i2cset -f -y 14 0x22 0x00 2
i2ctransfer -f -y 14 w3@0x22 0x1D 0x0A 0x06
//0.725V
i2cset -f -y 16 0x23 0x00 0
i2ctransfer -f -y 16 w3@0x23 0x21 0x60 0x00
i2cset -f -y 16 0x23 0x00 2
i2ctransfer -f -y 16 w3@0x23 0x0D 0x12 0x0C
//0.725V
i2cset -f -y 16 0x23 0x00 1
i2ctransfer -f -y 16 w3@0x23 0x21 0x60 0x00
i2cset -f -y 16 0x23 0x00 2
i2ctransfer -f -y 16 w3@0x23 0x1D 0x0A 0x06
//0.725V
i2cset -f -y 16 0x24 0x00 0
i2ctransfer -f -y 16 w3@0x24 0x21 0x60 0x00
i2cset -f -y 16 0x24 0x00 2
i2ctransfer -f -y 16 w3@0x24 0x0D 0x12 0x0C
//0.725V
i2cset -f -y 16 0x24 0x00 1
i2ctransfer -f -y 16 w3@0x24 0x21 0x60 0x00
i2cset -f -y 16 0x24 0x00 2
i2ctransfer -f -y 16 w3@0x24 0x1D 0x0A 0x06
//1.455V
i2cset -f -y 14 0x29 0x00 0
i2ctransfer -f -y 14 w3@0x29 0x21 0xF2 0x00
i2cset -f -y 14 0x29 0x00 2
i2ctransfer -f -y 14 w3@0x29 0x0D 0x51 0x1E
//1.455V
i2cset -f -y 14 0x29 0x00 1
i2ctransfer -f -y 14 w3@0x29 0x21 0xF2 0x00
i2cset -f -y 14 0x29 0x00 2
i2ctransfer -f -y 14 w3@0x29 0x1D 0x29 0x0F
//0.695V
i2cset -f -y 14 0x27 0x00 0
i2ctransfer -f -y 14 w3@0x27 0x21 0x5A 0x00
i2cset -f -y 14 0x27 0x00 2
i2ctransfer -f -y 14 w3@0x27 0x0D 0x54 0x0B
//0.695V
i2cset -f -y 14 0x27 0x00 1
i2ctransfer -f -y 14 w3@0x27 0x21 0x5A 0x00
i2cset -f -y 14 0x27 0x00 2
i2ctransfer -f -y 14 w3@0x27 0x1D 0xAC 0x05
//0.695V
i2cset -f -y 16 0x28 0x00 0
i2ctransfer -f -y 16 w3@0x28 0x21 0x5A 0x00
i2cset -f -y 16 0x28 0x00 2
i2ctransfer -f -y 16 w3@0x28 0x0D 0x54 0x0B
//0.695V
i2cset -f -y 16 0x28 0x00 1
i2ctransfer -f -y 16 w3@0x28 0x21 0x5A 0x00
i2cset -f -y 16 0x28 0x00 2
i2ctransfer -f -y 16 w3@0x28 0x1D 0xAC 0x05
//0.753V
i2cset -f -y 14 0x20 0x00 0
i2ctransfer -f -y 14 w3@0x20 0x21 0x2D 0x01