Compare commits
| Author | SHA1 | Date | |
|---|---|---|---|
  etwenandClaude Opus 5
|
215fed6e95 | ||
|
etwenandClaude Opus 5
|
db44f72352 |
+25
-4
@@ -120,6 +120,7 @@ Blanton_TTL_Script/
|
|||||||
│ ├── Blantons_FPGA_Registers_draft.docx # 同上，客戶原始 docx
|
│ ├── Blantons_FPGA_Registers_draft.docx # 同上，客戶原始 docx
|
||||||
│ ├── Blantons_FPGA_Registers_Map_draft.xlsx
|
│ ├── Blantons_FPGA_Registers_Map_draft.xlsx
|
||||||
│ ├── Blantons_PCIe_AER_and_DDR_EDAC_checks.pdf # AER / EDAC 檢查點依據
|
│ ├── Blantons_PCIe_AER_and_DDR_EDAC_checks.pdf # AER / EDAC 檢查點依據
|
||||||
|
│ ├── Blanton_Test_Flow.drawio # A/B/C + 熱安規四支的測試流程圖（draw.io）
|
||||||
│ ├── LTC2980_channel_map.csv # 9 個 settings/*.conf 合併：Board,CONN,Ch,NetName,Vnom（144 列）
|
│ ├── LTC2980_channel_map.csv # 9 個 settings/*.conf 合併：Board,CONN,Ch,NetName,Vnom（144 列）
|
||||||
│ ├── TTL_Script_Blanton_Status_20260814.xlsx
|
│ ├── TTL_Script_Blanton_Status_20260814.xlsx
|
||||||
│ └── TTL_Script_Blanton_Status_20260817.xlsx # ⭐ 最新：三支腳本逐項 Status（OK / On-Going + Owner）
|
│ └── TTL_Script_Blanton_Status_20260817.xlsx # ⭐ 最新：三支腳本逐項 Status（OK / On-Going + Owner）
|
||||||
@@ -134,6 +135,8 @@ Blanton_TTL_Script/
|
|||||||
│ ├── 100G_PRBS.txt # 100G PRBS 原始指令（port_prbs_monitor.sh 的來源）
|
│ ├── 100G_PRBS.txt # 100G PRBS 原始指令（port_prbs_monitor.sh 的來源）
|
||||||
│ ├── TR518.txt # 內建封包測試 tr 518 → blanton_tr518.sh
|
│ ├── TR518.txt # 內建封包測試 tr 518 → blanton_tr518.sh
|
||||||
│ ├── BER_Test.txt # 全機 PRBS BER 指令 → blanton_ber.sh
|
│ ├── BER_Test.txt # 全機 PRBS BER 指令 → blanton_ber.sh
|
||||||
|
│ ├── Multiphase_{high3,low3,comboA,comboB,Save}.txt # → blanton_multiphase_margin.sh
|
||||||
|
│ ├── Multiphase_Netname # 38 條軌的 net 名稱（區塊順序對應）
|
||||||
│ ├── 100G_Traffic.txt # ce0 VLAN 138 打流 → blanton_traffic_linespeed.sh
|
│ ├── 100G_Traffic.txt # ce0 VLAN 138 打流 → blanton_traffic_linespeed.sh
|
||||||
│ ├── fan_ctrl.txt # MAX31790 unbind/bind + fan-speed-control.sh 30
|
│ ├── fan_ctrl.txt # MAX31790 unbind/bind + fan-speed-control.sh 30
|
||||||
│ └── gen_channel_map.sh # settings/*.conf → docs/LTC2980_channel_map.csv（需 gawk）
|
│ └── gen_channel_map.sh # settings/*.conf → docs/LTC2980_channel_map.csv（需 gawk）
|
||||||
@@ -152,6 +155,7 @@ Blanton_TTL_Script/
|
|||||||
└── src/
|
└── src/
|
||||||
└── Script_ABC_Blanton/ # ← Tera Term 的工作目錄（整包給測試員）
|
└── Script_ABC_Blanton/ # ← Tera Term 的工作目錄（整包給測試員）
|
||||||
│
|
│
|
||||||
|
├── 4_Blanton_Script_thermal_safety.ttl # 熱 / 安規：獨立跑，不接 A→B→C
|
||||||
├── config.ttl # 全域設定：testcase 名、EN_Margin / EN_log、三個 prompt 字串
|
├── config.ttl # 全域設定：testcase 名、EN_Margin / EN_log、三個 prompt 字串
|
||||||
├── 1_Blanton_Script_A.ttl # Pre-test：登入 → 對時 → source 工具 → 清 AER → 抓基線
|
├── 1_Blanton_Script_A.ttl # Pre-test：登入 → 對時 → source 工具 → 清 AER → 抓基線
|
||||||
├── 2_Blanton_Script_B.ttl # Stress：開壓力程序 → while 1 每輪抓 fan/temp/margin
|
├── 2_Blanton_Script_B.ttl # Stress：開壓力程序 → while 1 每輪抓 fan/temp/margin
|
||||||
@@ -188,6 +192,7 @@ Blanton_TTL_Script/
|
|||||||
│ # eth0→TARGET_10G、eth1→TARGET_1G，兩張卡同時持續 ping
|
│ # eth0→TARGET_10G、eth1→TARGET_1G，兩張卡同時持續 ping
|
||||||
├── port_prbs_monitor.sh # 100G uplink PRBS 測試（bcmcmd phy diag）
|
├── port_prbs_monitor.sh # 100G uplink PRBS 測試（bcmcmd phy diag）
|
||||||
├── blanton_ber.sh # 全機 SerDes BER 掃描（phydiag prbs / prbsstat）
|
├── blanton_ber.sh # 全機 SerDes BER 掃描（phydiag prbs / prbsstat）
|
||||||
|
├── blanton_multiphase_margin.sh # 多相 VRM margin（原生 i2c，38 條軌）
|
||||||
├── nfc_polling.sh # NFC tag 背景輪詢 + PASS/FAIL 統計
|
├── nfc_polling.sh # NFC tag 背景輪詢 + PASS/FAIL 統計
|
||||||
├── blantons_nfc_validate.py # NFC/NCI 驗證工具（廠商提供，未修改）
|
├── blantons_nfc_validate.py # NFC/NCI 驗證工具（廠商提供，未修改）
|
||||||
├── blanton_tr518.sh # TR518 封包測試，量功耗前的負載來源
|
├── blanton_tr518.sh # TR518 封包測試，量功耗前的負載來源
|
||||||
@@ -355,16 +360,18 @@ PROFILE_CHANNELS=( "0:high:8" "1:low:8" ... ) # "channel:operation:change_perc
|
|||||||
|
|
||||||
| 模組 | 進入點 | 功能 |
|
| 模組 | 進入點 | 功能 |
|
||||||
|------|--------|------|
|
|------|--------|------|
|
||||||
| **Script A（Pre-test）** | `1_Blanton_Script_A.ttl` V1.1.2 | root 登入 → `date -s` 對時 → 清 job log → **收掉前一輪殘留**（`hw-test-session finish` → `bgctl reset --yes` → `bgctl stop --all` → `bgctl list` 確認清空）→ `hw-test-session start` → **設定風扇轉速** → **等資料面就緒**（`wait_init.ttl`）→ DUT 清單（boot/version/fwutil/syseeprom/ssdhealth/TPM/NVMe）→ BMC enroll + version/status → source bash 工具 → 清/讀 7 組 PCIe AER + `ras-mc-ctl --summary` → `lspci` → margin → PMON → dmesg → **10G/1G 管理網路 ping** → **NFC 基線**（start → 30s → stop → report）→ 100G uplink 設定與狀態 → **一輪流量基線** → `show uptime` |
|
| **Script A（Pre-test）** | `1_Blanton_Script_A.ttl` V1.1.5 | root 登入 → `date -s` 對時 → 清 job log → **收掉前一輪殘留**（`hw-test-session finish` → `bgctl reset --yes` → `bgctl stop --all` → `bgctl list` 確認清空）→ `hw-test-session start` → **設定風扇轉速** → **等資料面就緒**（`wait_init.ttl`）→ DUT 清單（boot/version/fwutil/syseeprom/ssdhealth/TPM/NVMe）→ BMC enroll + version/status → source bash 工具 → 清/讀 7 組 PCIe AER + `ras-mc-ctl --summary` → `lspci` → margin → PMON → dmesg → **10G/1G 管理網路 ping** → **NFC 基線**（start → 30s → stop → report）→ 100G uplink 設定與狀態 → **一輪流量基線** → `show uptime` |
|
||||||
| **Script B（Stress）** | `2_Blanton_Script_B.ttl` | `mlucas-avx2 -cpu 0:15` + `bgctl run` 的 `memtester` / SSD / USB 壓力 + BMC DDR（`bmc-manager run memtester`）→ BMC USB net test（探測 cdc_ncm 介面，`systemd-run` 掛 4 小時 ping）→ 啟動 mgmt ping 監控 → **啟動 NFC 輪詢** → `jobs` / `bgctl list` → traffic（依 `SWB_UNIT`）→ `while 1` 每輪完整 PMON + margin |
|
| **Script B（Stress）** | `2_Blanton_Script_B.ttl` | `mlucas-avx2 -cpu 0:15` + `bgctl run` 的 `memtester` / SSD / USB 壓力（v1.1.5 起 SSD/USB `--runtime 86400`、BMC memtester 不帶次數 = 跑到被停） + BMC DDR（`bmc-manager run memtester`）→ BMC USB net test（探測 cdc_ncm 介面，`systemd-run` 掛 4 小時 ping）→ 啟動 mgmt ping 監控 → **啟動 NFC 輪詢** → `jobs` / `bgctl list` → traffic（依 `SWB_UNIT`）→ `while 1` 每輪 PMON + `bgctl list`/`jobs` + `pause 60`（**V1.1.4 起 margin 不在迴圈內**）|
|
||||||
| **Script C（Post-test）** | `3_Blanton_Script_C.ttl` | `kill $(jobs -p)` + `bgctl stop --all` / `reset` + 停 BMC USB unit、mgmt ping 與 **NFC 輪詢** → PMON + dmesg → 7 組 AER + `ras-mc-ctl` → BMC USB `journalctl` → `ip -s link show eth0/eth1` → `cat` mlucas log → **NFC `report`** → traffic `stop` + `report` → **BER 掃描**（依 `SWB_UNIT`）→ NVMe 健康 → `show reboot-cause` / `uptime` → **job log 複製到 USB（帶時戳）** → `hw-test-session finish` |
|
| **Script C（Post-test）** | `3_Blanton_Script_C.ttl` | `kill $(jobs -p)` + `bgctl stop --all` / `reset` + 停 BMC USB unit、mgmt ping 與 **NFC 輪詢** → PMON + dmesg → 7 組 AER + `ras-mc-ctl` → BMC USB `journalctl` → `ip -s link show eth0/eth1` → `cat` mlucas log → **NFC `report`** → traffic `stop` + `report` → **BER 掃描**（依 `SWB_UNIT`）→ NVMe 健康 → `show reboot-cause` → **margin 掃描**（`EN_Margin`，V1.1.4 由 Script B 移來）→ `uptime` → **job log 複製到 USB（帶時戳）** → `exit` + wait『Script done』→ `hw-test-session finish` |
|
||||||
| **SWB loopback 流量** | `blanton_traffic_linespeed <sub> [-u 0\|1\|all]` | `init`（VLAN 30..137，成對 `cdN`/`cdN+32`）→ `clear` → `start`（`tx 100 length=512`）→ `stop` → `report`（per-pair TX/RX 交叉比對 PASS/FAIL）；另有 `ps`（link/speed）與 `run`（一條龍）。**V0.6.0 起含 100G uplink `ce0`**（VLAN 138）：它沒有 loopback 對象，靠 **ingress mirror 打回自己**維持循環，`report` 最後一列就是它，底下再接一份跨 unit summary |
|
| **Script 4（Thermal / Safety）** | `4_Blanton_Script_thermal_safety.ttl` | **獨立腳本，不接 A→B→C。** Script A 式的環境建立（登入 / session / 風扇 / `wait_init` / DUT 清單 / BMC / PCIe 清除 / `pcie_bus` / PMON / dmesg）→ **滿載**（`mlucas-avx2 -cpu 0:15` 背景 + `blanton_tr518.sh start`）→ `while 1`：PMON + `TH6_SWB0/1_power_readback.sh` + `bgctl list` / `jobs`，`pause 60`。**沒有收尾段** —— 中斷後 DUT 仍在 `port cd lb=mac` / `l2 learn off` / `test mode nr=yes`，要手動 `blanton_tr518.sh stop` |
|
||||||
|
| **SWB loopback 流量** | `blanton_traffic_linespeed <sub> [-u 0\|1\|all]` | `init`（VLAN 30..137，成對 `cdN`/`cdN+32`）→ `clear` → `start`（`tx 200 length=324 PatternRandom=yes`，v0.7.0 起）→ `stop` → `report`（per-pair TX/RX 交叉比對 PASS/FAIL）；另有 `ps`（link/speed）與 `run`（一條龍）。**V0.6.0 起含 100G uplink `ce0`**（VLAN 138）：它沒有 loopback 對象，靠 **ingress mirror 打回自己**維持循環，`report` 最後一列就是它，底下再接一份跨 unit summary |
|
||||||
| **FPGA 暫存器存取** | `cb_fpga <fn> <addr> [data]`、`fpga_rescan` | pcimem 打 `resource0` + BAR 相對 offset，32-bit word；BDF 於 source 時自動偵測；`pmc/icb/swb0/swb1_fpga` 走 VSPI 窗口 |
|
| **FPGA 暫存器存取** | `cb_fpga <fn> <addr> [data]`、`fpga_rescan` | pcimem 打 `resource0` + BAR 相對 offset，32-bit word；BDF 於 source 時自動偵測；`pmc/icb/swb0/swb1_fpga` 走 VSPI 窗口 |
|
||||||
| **CB I2C / PMBus** | `cb_i2c_init/scan/read/write`、`cb_pmbus_read/write/linear16` | FPGA F3 OpenCores master，**讀用 Repeated START**（SMBus/PMBus 裝置必需） |
|
| **CB I2C / PMBus** | `cb_i2c_init/scan/read/write`、`cb_pmbus_read/write/linear16` | FPGA F3 OpenCores master，**讀用 Repeated START**（SMBus/PMBus 裝置必需） |
|
||||||
| **ICB / PDB 存取** | `vi2c_init/scan/read/write`、`vi2c_scan_all` | CB F3 VI2C proxy，~3.3 ms/reg，取代 VSPI 的 ~18 ms/reg（後者會踩 SMBus 25–35 ms timeout） |
|
| **ICB / PDB 存取** | `vi2c_init/scan/read/write`、`vi2c_scan_all` | CB F3 VI2C proxy，~3.3 ms/reg，取代 VSPI 的 ~18 ms/reg（後者會踩 SMBus 25–35 ms timeout） |
|
||||||
| **溫度** | `temp_cb` / `temp_icb` / `temp_all` | TMP75（12-bit 左靠齊 ×0.0625）、TMP432（含 RANGE bit 的 −64 偏移、remote1/2） |
|
| **溫度** | `temp_cb` / `temp_icb` / `temp_all` | TMP75（12-bit 左靠齊 ×0.0625）、TMP432（含 RANGE bit 的 −64 偏移、remote1/2） |
|
||||||
| **電源資料** | `pwr_data` / `pwr_data_pdb` / `pwr_pdb_id` | SWB VRM 全軌 Vin/Vout/Iout/Temp 對齊表；MP29816 解析度**執行期從 `MFR_VOUT_SCALE_LOOP` 讀**，不寫死 |
|
| **電源資料** | `pwr_data` / `pwr_data_pdb` / `pwr_pdb_id` | SWB VRM 全軌 Vin/Vout/Iout/Temp 對齊表；MP29816 解析度**執行期從 `MFR_VOUT_SCALE_LOOP` 讀**，不寫死 |
|
||||||
| **電壓 Margin** | `margin_init/status/set/apply_profile/save` + `*_all.sh` | 9 顆 LTC2980（CB CONN13、SWB0/1 CONN13~16）批次 high/low margin 與狀態掃描。`VNOM` 為 Blanton 實測中位數（2026-08-30）；SWB 的 profile 是 per-CONN，套錯 CONN 會 margin 到錯的軌且不報錯。v2.6.0 起 SWB 路徑真正接上共用 cb_i2c 後端，並有 `margin_swb_info/probe/scan/reset/sem` 除錯包裝 |
|
| **電壓 Margin** | `margin_init/status/set/apply_profile/save` + `*_all.sh` | 9 顆 LTC2980（CB CONN13、SWB0/1 CONN13~16）批次 high/low margin 與狀態掃描。`VNOM` 為 Blanton 實測中位數（2026-08-30）；SWB 的 profile 是 per-CONN，套錯 CONN 會 margin 到錯的軌且不報錯。v2.6.0 起 SWB 路徑真正接上共用 cb_i2c 後端，並有 `margin_swb_info/probe/scan/reset/sem` 除錯包裝 |
|
||||||
|
| **Multiphase VRM margin** | `blanton_multiphase_margin.sh {high3\|low3\|comboA\|comboB\|save} [-u 0\|1\|all]` | 兩片 SWB 的多相控制器（**不是** `margin.sh` 管的 LTC2980），走原生 i2c bus：SWB0 = `/dev/i2c-13`+`-15`、SWB1 = `-14`+`-16`。每片 19 條軌、共 38 條，逐條印 `SWB0_0V9_ANLG0 - 0.930V Configure Done`。`save` 沒有 per-rail 對應，只印 `Multiphase Save All`。⚠️ `save` 是 `STORE_USER_ALL`（0x15，TH6 core 用 0x17）**永久寫 NVM**；⚠️ 與 `margin.sh` 從兩側摸同一批軌，**不可同時用** |
|
||||||
| **Margin 寫 NVM** | `margin_save` / `margin_save all` / `margin_save blanton` | ⚠️ 永久寫入。`0x15` 送 PMBus **send-byte**（不帶 data byte）。`all` = 依 `settings/` 走 9 顆、跑完還原原本載入的板子；`blanton` = 本平台捷徑，18 顆全走原生 i2c bus（`MARGIN_BLANTON_STORE` 表），不需 `margin_init`。每筆之間 `MARGIN_STORE_SETTLE`（0.5s），工具**不 poll busy bit** |
|
| **Margin 寫 NVM** | `margin_save` / `margin_save all` / `margin_save blanton` | ⚠️ 永久寫入。`0x15` 送 PMBus **send-byte**（不帶 data byte）。`all` = 依 `settings/` 走 9 顆、跑完還原原本載入的板子；`blanton` = 本平台捷徑，18 顆全走原生 i2c bus（`MARGIN_BLANTON_STORE` 表），不需 `margin_init`。每筆之間 `MARGIN_STORE_SETTLE`（0.5s），工具**不 poll busy bit** |
|
||||||
| **管理網路 ping** | `mgmt_ping_monitor.sh {start\|stop\|status\|fg\|tail\|clear\|summary}` | 一輪 = 10G leg + 1G leg，各自 `ip address/route replace` 後 `ping -I <if>` 打自己的對端；兩張卡都保持 up。每 leg 記 `ip -s link show` 與該卡的 TX/RX packet delta，另出一行可 grep 的 `RESULT` |
|
| **管理網路 ping** | `mgmt_ping_monitor.sh {start\|stop\|status\|fg\|tail\|clear\|summary}` | 一輪 = 10G leg + 1G leg，各自 `ip address/route replace` 後 `ping -I <if>` 打自己的對端；兩張卡都保持 up。每 leg 記 `ip -s link show` 與該卡的 TX/RX packet delta，另出一行可 grep 的 `RESULT` |
|
||||||
| **BMC 監控** | `bmc_monitor.sh {start\|stop\|status\|fg\|tail\|clear}` | 由 host 端 `bmc-manager run` 週期取樣 `free -m`，另加一組 **I2C 寫入/讀回圖樣測試**（bus 1、addr 0x41、offset 0x00C0，寫 `55AA55AA` 讀回、再寫 `AA55AA55` 讀回）。B 啟動、C 停止並 `cat log/bmc_poll.log` |
|
| **BMC 監控** | `bmc_monitor.sh {start\|stop\|status\|fg\|tail\|clear}` | 由 host 端 `bmc-manager run` 週期取樣 `free -m`，另加一組 **I2C 寫入/讀回圖樣測試**（bus 1、addr 0x41、offset 0x00C0，寫 `55AA55AA` 讀回、再寫 `AA55AA55` 讀回）。B 啟動、C 停止並 `cat log/bmc_poll.log` |
|
||||||
@@ -801,6 +808,20 @@ margin status、全部 VRM 軌的 Vin/Vout/Iout/Temp、CB + ICB 溫感讀值，
|
|||||||
**`sleep 120` 的方向還沒驗證** —— 若 `tr 518` 的流量是有時限的（參數含 `runtime=1`、
|
**`sleep 120` 的方向還沒驗證** —— 若 `tr 518` 的流量是有時限的（參數含 `runtime=1`、
|
||||||
`CheckDataTime=200`），等 120 秒可能量到已經降下來的值，要上機比對 0s / 30s / 120s 三次；
|
`CheckDataTime=200`），等 120 秒可能量到已經降下來的值，要上機比對 0s / 30s / 120s 三次；
|
||||||
TTL 尚未呼叫它。
|
TTL 尚未呼叫它。
|
||||||
|
- **`--runtime 86400` 是 24 小時的上限，不是「永遠」**：超過一天的 soak，SSD 與 USB 壓力會在
|
||||||
|
第 24 小時安靜結束，剩下的時間那兩項是閒置的。Script B 每輪都印 `bgctl list`，數量變少會看得到，
|
||||||
|
但**沒有任何東西會主動報警**。真的要跑更久，得把數字改大或加一段重啟 job 的邏輯。
|
||||||
|
- **`blanton_multiphase_margin.sh` 與 `margin.sh` 沒有互斥機制**：兩支從不同側（原生 i2c vs
|
||||||
|
LTC2980 PMBus）摸同一批軌，各自都假設自己是唯一的寫入者。目前只靠文件與 help 提醒，
|
||||||
|
沒有任何執行期檢查。
|
||||||
|
- **Script 4 沒有收尾段**：`while 1` 之後就是檔案結尾，中斷時 DUT 停在 `port cd lb=mac` /
|
||||||
|
`l2 learn off` / `test mode nr=yes`，而且 `mlucas-avx2` 還在背景跑。要手動
|
||||||
|
`blanton_tr518.sh stop` + `kill`，否則下一輪任何測試都在被污染的狀態上開始
|
||||||
|
（Script A 的 `bgctl reset/stop --all` 收得掉 job，但收不掉 bcm 的 loopback 設定）。
|
||||||
|
可考慮加一支對應的收尾腳本，或在檔尾用 `messagebox` 提示要下哪些指令。
|
||||||
|
- **margin 在 soak 期間不再取樣**（V1.1.4）：只剩 Script A 的起始值與 Script C 的結束值。
|
||||||
|
漂移發生在中間就看不到了。若要恢復，比較好的做法是在 B 的迴圈內每 N 輪才掃一次，
|
||||||
|
而不是每輪都掃。
|
||||||
- **`blanton_ber.sh` 的 `sleep 30` 與 `BER_INTERVAL` 是兩處要同步改的數字**：Script C 寫死
|
- **`blanton_ber.sh` 的 `sleep 30` 與 `BER_INTERVAL` 是兩處要同步改的數字**：Script C 寫死
|
||||||
`sendln "sleep 30"`，腳本預設 `BER_INTERVAL=30`。改一邊沒改另一邊，report 會讀到還沒累積完
|
`sendln "sleep 30"`，腳本預設 `BER_INTERVAL=30`。改一邊沒改另一邊，report 會讀到還沒累積完
|
||||||
一個 interval 的數字，而且不會有任何警告。
|
一個 interval 的數字，而且不會有任何警告。
|
||||||
|
|||||||
@@ -9,7 +9,7 @@ DUT 端的取數能力由一組 **bash 工具庫** 提供（CB FPGA `pcimem` →
|
|||||||
|
|
||||||
完整架構見 [ARCHITECTURE.md](ARCHITECTURE.md)。
|
完整架構見 [ARCHITECTURE.md](ARCHITECTURE.md)。
|
||||||
|
|
||||||
**目前狀態（2026-08-30）**：Script A 為 **V1.1.3**（A 集中記錄 A/B/C 三支的變更）。涵蓋
|
**目前狀態（2026-09-01）**：Script A 為 **V1.1.5**（A 集中記錄所有 TTL 的變更）。涵蓋
|
||||||
PCIe AER / DDR EDAC / PMON+TPM / 電壓 margin（9 顆 LTC2980）/ SWB loopback 線速流量 /
|
PCIe AER / DDR EDAC / PMON+TPM / 電壓 margin（9 顆 LTC2980）/ SWB loopback 線速流量 /
|
||||||
10G+1G 管理網路 ping / BMC DDR 與 USB / NVMe 健康，壓力層走平台的 `bgctl`。
|
10G+1G 管理網路 ping / BMC DDR 與 USB / NVMe 健康，壓力層走平台的 `bgctl`。
|
||||||
switch unit 數量由 `config.ttl` 的 `SWB_UNIT0` / `SWB_UNIT1` 宣告，風扇轉速由 `FAN_SPEED` 指定
|
switch unit 數量由 `config.ttl` 的 `SWB_UNIT0` / `SWB_UNIT1` 宣告，風扇轉速由 `FAN_SPEED` 指定
|
||||||
@@ -23,7 +23,10 @@ TR518 負載（`blanton_tr518.sh`，**TTL 尚未接**）、SWB 軌功耗（`TH6_
|
|||||||
Script A 開頭會先收掉前一輪殘留（`hw-test-session finish` + `bgctl reset/stop --all`），
|
Script A 開頭會先收掉前一輪殘留（`hw-test-session finish` + `bgctl reset/stop --all`），
|
||||||
再 `bgctl list` 確認沒有 job 留著佔資源。
|
再 `bgctl list` 確認沒有 job 留著佔資源。
|
||||||
NFC tag 讀取由 `nfc_polling.sh` 背景輪詢（A 做基線、B 起、C 停並 report）。
|
NFC tag 讀取由 `nfc_polling.sh` 背景輪詢（A 做基線、B 起、C 停並 report）。
|
||||||
最後一次發布是 **V1.1.2**；SWB 的 I2C 通道與位址已於 2026-08-19 上機驗證。
|
另有 **`4_Blanton_Script_thermal_safety.ttl`**（熱 / 安規，**獨立跑不接 A→B→C**，滿載後每分鐘
|
||||||
|
取 PMON + 兩片 SWB 的軌功耗；**沒有收尾段**，中斷後要手動 `blanton_tr518.sh stop`）。
|
||||||
|
流程圖：`docs/Blanton_Test_Flow.drawio`。
|
||||||
|
最後一次發布是 **V1.1.4**；SWB 的 I2C 通道與位址已於 2026-08-19 上機驗證。
|
||||||
margin 的 `VNOM` 已於 2026-08-30 改為 Blanton 實測中位數（144 條軌中 86 條上調 0.8~2.5%）。
|
margin 的 `VNOM` 已於 2026-08-30 改為 Blanton 實測中位數（144 條軌中 86 條上調 0.8~2.5%）。
|
||||||
交付用 `./publish/publish.sh` 打包。
|
交付用 `./publish/publish.sh` 打包。
|
||||||
|
|
||||||
@@ -114,6 +117,16 @@ bash ~/Blanton_Script/port_prbs_monitor.sh report # PASS/FAIL 統計（沒
|
|||||||
bash ~/Blanton_Script/port_prbs_monitor.sh stop # 收尾會跑 prbsstat STOp + prbs clear
|
bash ~/Blanton_Script/port_prbs_monitor.sh stop # 收尾會跑 prbsstat STOp + prbs clear
|
||||||
# ⚠️ PRBS 打起來時 link 會顯示 down，這是正常的 —— 所以 start 刻意不印 port status
|
# ⚠️ PRBS 打起來時 link 會顯示 down，這是正常的 —— 所以 start 刻意不印 port status
|
||||||
|
|
||||||
|
# ── 多相 VRM margin（原生 i2c，38 條軌）──────────────
|
||||||
|
./Blanton_Script/blanton_multiphase_margin.sh high3 # 全部 +3%
|
||||||
|
./Blanton_Script/blanton_multiphase_margin.sh low3 # 全部 -3%
|
||||||
|
./Blanton_Script/blanton_multiphase_margin.sh comboA # 混合，組合 A
|
||||||
|
./Blanton_Script/blanton_multiphase_margin.sh comboB # 混合，組合 B
|
||||||
|
./Blanton_Script/blanton_multiphase_margin.sh save # ⚠️ 永久寫 NVM
|
||||||
|
# -u 0 / -u 1 單邊（SWB0=i2c-13/15，SWB1=i2c-14/16）；-n 只印指令
|
||||||
|
# 逐條印 SWB0_0V9_ANLG0 - 0.930V Configure Done；save 只印 Multiphase Save All
|
||||||
|
# ⚠️ 這不是 margin.sh 管的 LTC2980，兩支摸同一批軌，不要同時用
|
||||||
|
|
||||||
# ── 全機 SerDes BER（PRBS，期間 link 會顯示 DOWN）────
|
# ── 全機 SerDes BER（PRBS，期間 link 會顯示 DOWN）────
|
||||||
./Blanton_Script/blanton_ber.sh init # prbs set p=3 + prbs get（檢查每條 lane 鎖定）
|
./Blanton_Script/blanton_ber.sh init # prbs set p=3 + prbs get（檢查每條 lane 鎖定）
|
||||||
./Blanton_Script/blanton_ber.sh start # prbsstat STArt Interval=30
|
./Blanton_Script/blanton_ber.sh start # prbsstat STArt Interval=30
|
||||||
@@ -219,6 +232,17 @@ Tera Term 連 COM port (115200-8-N-1)
|
|||||||
- ⚠️ **ICB/PDB 一律走 VI2C（`blanton_icb_vi2c.sh`），不要走 VSPI**：VSPI ~18 ms/reg 會讓 I2C
|
- ⚠️ **ICB/PDB 一律走 VI2C（`blanton_icb_vi2c.sh`），不要走 VSPI**：VSPI ~18 ms/reg 會讓 I2C
|
||||||
byte 相間隔拉到 ~50 ms，踩中 SMBus 25–35 ms timeout，裝置直接 NACK。實測全掃 9.4 s vs 34.0 s。
|
byte 相間隔拉到 ~50 ms，踩中 SMBus 25–35 ms timeout，裝置直接 NACK。實測全掃 9.4 s vs 34.0 s。
|
||||||
- ⚠️ **I2C 讀一律 Repeated START**（不是 STOP + START），否則 PMBus/SMBus 裝置（VRM、EFUSE）不理。
|
- ⚠️ **I2C 讀一律 Repeated START**（不是 STOP + START），否則 PMBus/SMBus 裝置（VRM、EFUSE）不理。
|
||||||
|
- ⚠️ **`--runtime 86400` 是 24 小時上限**：超過一天的 soak，SSD / USB 壓力會安靜結束，
|
||||||
|
剩下的時間那兩項閒置。`bgctl list` 的數量變少是唯一的線索，**不會報警**
|
||||||
|
- ⚠️ **多相 VRM 與 LTC2980 是同一批軌的兩條路**：`blanton_multiphase_margin.sh`（原生 i2c）
|
||||||
|
和 `margin.sh`（LTC2980 PMBus）都假設自己是唯一寫入者，**沒有互斥檢查**，只靠人記得
|
||||||
|
- ⚠️ **traffic 的計數器基準在 v0.7.0 變了**：`tx 100 length=512` → `tx 200 length=324`，
|
||||||
|
每 burst 的位元組數 +27%。PASS/FAIL 是成對交叉比對不受影響，但**絕對值不能跟舊 log 比**
|
||||||
|
- ⚠️ **Script 4（thermal/safety）沒有收尾**：`while 1` 之後就是檔尾。中斷後 DUT 停在
|
||||||
|
`port cd lb=mac` / `l2 learn off` / `test mode nr=yes`，`mlucas-avx2` 也還在背景。
|
||||||
|
下一個測試會在被污染的狀態上開始，而且 **`show interfaces status` 看不出來**。
|
||||||
|
收尾：`blanton_tr518.sh stop` + `kill $(jobs -p)`
|
||||||
|
- ⚠️ **Script 4 與 Script B 不能共用同一台 DUT**：兩者都會接管 `port cd` 的 loopback
|
||||||
- ⚠️ **`settings/*.conf` 的 `VNOM` 是實測中位數，不是規格值**（2026-08-30 起）。它同時是
|
- ⚠️ **`settings/*.conf` 的 `VNOM` 是實測中位數，不是規格值**（2026-08-30 起）。它同時是
|
||||||
`margin_status` 偏差 % 的分母、也是 `margin_set` 推算 high/low/OV/UV 的基準，所以改它會
|
`margin_status` 偏差 % 的分母、也是 `margin_set` 推算 high/low/OV/UV 的基準，所以改它會
|
||||||
同時移動「看到的數字」和「實際打出去的電壓」。**跨這個日期的 margin log 不能直接互比。**
|
同時移動「看到的數字」和「實際打出去的電壓」。**跨這個日期的 margin log 不能直接互比。**
|
||||||
|
|||||||
@@ -0,0 +1,172 @@
|
|||||||
|
<mxfile host="app.diagrams.net" agent="Blanton_TTL_Script/tools" version="24.7.17">
|
||||||
|
<diagram id="blanton-test-flow" name="Blanton Test Flow">
|
||||||
|
<mxGraphModel dx="1400" dy="900" grid="1" gridSize="10" guides="1" tooltips="1" connect="1" arrows="1" fold="1" page="1" pageScale="1" pageWidth="1670" pageHeight="1785" math="0" shadow="0">
|
||||||
|
<root>
|
||||||
|
<mxCell id="0"/>
|
||||||
|
<mxCell id="1" parent="0"/>
|
||||||
|
<mxCell id="n11" value="Blanton (Project Helios) — 測試流程" style="text;html=1;align=center;verticalAlign=middle;fontSize=20;fontStyle=1;" vertex="1" parent="1"><mxGeometry x="30" y="20" width="1610" height="34" as="geometry"/></mxCell>
|
||||||
|
<mxCell id="n12" value="來源：src/Script_ABC_Blanton/{1,2,3}_Blanton_Script_*.ttl（Script A V1.1.3） · ⟨…⟩ = 由 config.ttl 的旗標決定" style="text;html=1;align=center;verticalAlign=middle;fontSize=11;fontColor=#666666;" vertex="1" parent="1"><mxGeometry x="30" y="54" width="1610" height="20" as="geometry"/></mxCell>
|
||||||
|
<mxCell id="n13" value="Script A — Pre-test（基線 / 環境建立）" style="swimlane;html=1;startSize=34;fillColor=#ffffff;strokeColor=#4d4d4d;fontSize=14;fontStyle=1;horizontal=1;" vertex="1" parent="1"><mxGeometry x="30" y="96" width="380" height="1459" as="geometry"/></mxCell>
|
||||||
|
<mxCell id="n14" value="<b>include config.ttl</b><br>project_name, strTestcase, EN_Margin,<br>EN_log, FAN_SPEED, SWB_UNIT0/1" style="rounded=1;whiteSpace=wrap;html=1;fillColor=#fff2cc;strokeColor=#d6b656;align=left;spacingLeft=8;verticalAlign=middle;fontSize=11;" vertex="1" parent="n13"><mxGeometry x="18" y="44" width="344" height="64" as="geometry"/></mxCell>
|
||||||
|
<mxCell id="n15" value="<b>logopen</b> Logs/&lt;proj&gt;_&lt;case&gt;_&lt;ts&gt;.log<br><i>⟨EN_log = 1⟩</i>" style="rounded=1;whiteSpace=wrap;html=1;fillColor=#fff2cc;strokeColor=#d6b656;align=left;spacingLeft=8;verticalAlign=middle;fontSize=11;" vertex="1" parent="n13"><mxGeometry x="18" y="124" width="344" height="49" as="geometry"/></mxCell>
|
||||||
|
<mxCell id="e16" value="" style="edgeStyle=orthogonalEdgeStyle;rounded=0;html=1;exitX=0.5;exitY=1;exitDx=0;exitDy=0;entryX=0.5;entryY=0;entryDx=0;entryDy=0;strokeColor=#4d4d4d;" edge="1" parent="1" source="n14" target="n15"><mxGeometry relative="1" as="geometry"/></mxCell>
|
||||||
|
<mxCell id="n17" value="<b>Root Login</b><br>login → sudo -i → root@sonic:~#" style="rounded=1;whiteSpace=wrap;html=1;fillColor=#dae8fc;strokeColor=#6c8ebf;align=left;spacingLeft=8;verticalAlign=middle;fontSize=11;" vertex="1" parent="n13"><mxGeometry x="18" y="189" width="344" height="49" as="geometry"/></mxCell>
|
||||||
|
<mxCell id="e18" value="" style="edgeStyle=orthogonalEdgeStyle;rounded=0;html=1;exitX=0.5;exitY=1;exitDx=0;exitDy=0;entryX=0.5;entryY=0;entryDx=0;entryDy=0;strokeColor=#4d4d4d;" edge="1" parent="1" source="n15" target="n17"><mxGeometry relative="1" as="geometry"/></mxCell>
|
||||||
|
<mxCell id="n19" value="<b>Pre Setting</b><br>date -s 對時 · rm /host/hw-eval/jobs/*" style="rounded=1;whiteSpace=wrap;html=1;fillColor=#dae8fc;strokeColor=#6c8ebf;align=left;spacingLeft=8;verticalAlign=middle;fontSize=11;" vertex="1" parent="n13"><mxGeometry x="18" y="254" width="344" height="49" as="geometry"/></mxCell>
|
||||||
|
<mxCell id="e20" value="" style="edgeStyle=orthogonalEdgeStyle;rounded=0;html=1;exitX=0.5;exitY=1;exitDx=0;exitDy=0;entryX=0.5;entryY=0;entryDx=0;entryDy=0;strokeColor=#4d4d4d;" edge="1" parent="1" source="n17" target="n19"><mxGeometry relative="1" as="geometry"/></mxCell>
|
||||||
|
<mxCell id="n21" value="<b>HW Test Session — 收前一輪</b><br>hw-test-session finish · bgctl reset --yes<br>bgctl stop --all · <b>bgctl list 必須空</b>" style="rounded=1;whiteSpace=wrap;html=1;fillColor=#f8cecc;strokeColor=#b85450;align=left;spacingLeft=8;verticalAlign=middle;fontSize=11;" vertex="1" parent="n13"><mxGeometry x="18" y="319" width="344" height="64" as="geometry"/></mxCell>
|
||||||
|
<mxCell id="e22" value="" style="edgeStyle=orthogonalEdgeStyle;rounded=0;html=1;exitX=0.5;exitY=1;exitDx=0;exitDy=0;entryX=0.5;entryY=0;entryDx=0;entryDy=0;strokeColor=#4d4d4d;" edge="1" parent="1" source="n19" target="n21"><mxGeometry relative="1" as="geometry"/></mxCell>
|
||||||
|
<mxCell id="n23" value="<b>hw-test-session start</b>" style="rounded=1;whiteSpace=wrap;html=1;fillColor=#dae8fc;strokeColor=#6c8ebf;align=left;spacingLeft=8;verticalAlign=middle;fontSize=11;" vertex="1" parent="n13"><mxGeometry x="18" y="399" width="344" height="34" as="geometry"/></mxCell>
|
||||||
|
<mxCell id="e24" value="" style="edgeStyle=orthogonalEdgeStyle;rounded=0;html=1;exitX=0.5;exitY=1;exitDx=0;exitDy=0;entryX=0.5;entryY=0;entryDx=0;entryDy=0;strokeColor=#4d4d4d;" edge="1" parent="1" source="n21" target="n23"><mxGeometry relative="1" as="geometry"/></mxCell>
|
||||||
|
<mxCell id="n25" value="<b>FAN SPEED</b><br>max31790 rebind ×2 → fan-speed-control.sh $FAN_SPEED" style="rounded=1;whiteSpace=wrap;html=1;fillColor=#dae8fc;strokeColor=#6c8ebf;align=left;spacingLeft=8;verticalAlign=middle;fontSize=11;" vertex="1" parent="n13"><mxGeometry x="18" y="449" width="344" height="49" as="geometry"/></mxCell>
|
||||||
|
<mxCell id="e26" value="" style="edgeStyle=orthogonalEdgeStyle;rounded=0;html=1;exitX=0.5;exitY=1;exitDx=0;exitDy=0;entryX=0.5;entryY=0;entryDx=0;entryDy=0;strokeColor=#4d4d4d;" edge="1" parent="1" source="n23" target="n25"><mxGeometry relative="1" as="geometry"/></mxCell>
|
||||||
|
<mxCell id="n27" value="<b>Wait DUT Init</b> utils/wait_init.ttl<br>輪詢 bcmcmd ps，兩 unit link up ≥ 216<br><i>⟨SWB_UNIT0 / SWB_UNIT1⟩ · 無逾時出口</i>" style="rounded=1;whiteSpace=wrap;html=1;fillColor=#fff2cc;strokeColor=#d6b656;align=left;spacingLeft=8;verticalAlign=middle;fontSize=11;" vertex="1" parent="n13"><mxGeometry x="18" y="514" width="344" height="64" as="geometry"/></mxCell>
|
||||||
|
<mxCell id="e28" value="" style="edgeStyle=orthogonalEdgeStyle;rounded=0;html=1;exitX=0.5;exitY=1;exitDx=0;exitDy=0;entryX=0.5;entryY=0;entryDx=0;entryDy=0;strokeColor=#4d4d4d;" edge="1" parent="1" source="n25" target="n27"><mxGeometry relative="1" as="geometry"/></mxCell>
|
||||||
|
<mxCell id="n29" value="<b>DUT Info</b><br>show boot/version/platform · fwutil · syseeprom<br>ssdhealth · TPM · NVMe" style="rounded=1;whiteSpace=wrap;html=1;fillColor=#dae8fc;strokeColor=#6c8ebf;align=left;spacingLeft=8;verticalAlign=middle;fontSize=11;" vertex="1" parent="n13"><mxGeometry x="18" y="594" width="344" height="64" as="geometry"/></mxCell>
|
||||||
|
<mxCell id="e30" value="" style="edgeStyle=orthogonalEdgeStyle;rounded=0;html=1;exitX=0.5;exitY=1;exitDx=0;exitDy=0;entryX=0.5;entryY=0;entryDx=0;entryDy=0;strokeColor=#4d4d4d;" edge="1" parent="1" source="n27" target="n29"><mxGeometry relative="1" as="geometry"/></mxCell>
|
||||||
|
<mxCell id="n31" value="<b>BMC</b> bmc-first-enroll · version · status" style="rounded=1;whiteSpace=wrap;html=1;fillColor=#dae8fc;strokeColor=#6c8ebf;align=left;spacingLeft=8;verticalAlign=middle;fontSize=11;" vertex="1" parent="n13"><mxGeometry x="18" y="674" width="344" height="34" as="geometry"/></mxCell>
|
||||||
|
<mxCell id="e32" value="" style="edgeStyle=orthogonalEdgeStyle;rounded=0;html=1;exitX=0.5;exitY=1;exitDx=0;exitDy=0;entryX=0.5;entryY=0;entryDx=0;entryDy=0;strokeColor=#4d4d4d;" edge="1" parent="1" source="n29" target="n31"><mxGeometry relative="1" as="geometry"/></mxCell>
|
||||||
|
<mxCell id="n33" value="<b>Load Shell Script</b><br>source blanton_fpga_pcimem / cb_i2c / icb_vi2c /<br>temp_sensor / pwr_data / traffic_linespeed / margin" style="rounded=1;whiteSpace=wrap;html=1;fillColor=#dae8fc;strokeColor=#6c8ebf;align=left;spacingLeft=8;verticalAlign=middle;fontSize=11;" vertex="1" parent="n13"><mxGeometry x="18" y="724" width="344" height="64" as="geometry"/></mxCell>
|
||||||
|
<mxCell id="e34" value="" style="edgeStyle=orthogonalEdgeStyle;rounded=0;html=1;exitX=0.5;exitY=1;exitDx=0;exitDy=0;entryX=0.5;entryY=0;entryDx=0;entryDy=0;strokeColor=#4d4d4d;" edge="1" parent="1" source="n31" target="n33"><mxGeometry relative="1" as="geometry"/></mxCell>
|
||||||
|
<mxCell id="n35" value="<b>CLEAR PCIe Error</b> ×7<br>TH6_SWB0 · TH6_SWB1 · FPGA · BMC · DDR · I210 · SSD" style="rounded=1;whiteSpace=wrap;html=1;fillColor=#dae8fc;strokeColor=#6c8ebf;align=left;spacingLeft=8;verticalAlign=middle;fontSize=11;" vertex="1" parent="n13"><mxGeometry x="18" y="804" width="344" height="49" as="geometry"/></mxCell>
|
||||||
|
<mxCell id="e36" value="" style="edgeStyle=orthogonalEdgeStyle;rounded=0;html=1;exitX=0.5;exitY=1;exitDx=0;exitDy=0;entryX=0.5;entryY=0;entryDx=0;entryDy=0;strokeColor=#4d4d4d;" edge="1" parent="1" source="n33" target="n35"><mxGeometry relative="1" as="geometry"/></mxCell>
|
||||||
|
<mxCell id="n37" value="<b>PCIe tree / link / bandwidth</b> utils/pcie_bus.ttl" style="rounded=1;whiteSpace=wrap;html=1;fillColor=#dae8fc;strokeColor=#6c8ebf;align=left;spacingLeft=8;verticalAlign=middle;fontSize=11;" vertex="1" parent="n13"><mxGeometry x="18" y="869" width="344" height="34" as="geometry"/></mxCell>
|
||||||
|
<mxCell id="e38" value="" style="edgeStyle=orthogonalEdgeStyle;rounded=0;html=1;exitX=0.5;exitY=1;exitDx=0;exitDy=0;entryX=0.5;entryY=0;entryDx=0;entryDy=0;strokeColor=#4d4d4d;" edge="1" parent="1" source="n35" target="n37"><mxGeometry relative="1" as="geometry"/></mxCell>
|
||||||
|
<mxCell id="n39" value="<b>Check Margin</b> margin_status_all.sh（9 顆 LTC2980）<br><i>⟨EN_Margin = 1⟩</i>" style="rounded=1;whiteSpace=wrap;html=1;fillColor=#fff2cc;strokeColor=#d6b656;align=left;spacingLeft=8;verticalAlign=middle;fontSize=11;" vertex="1" parent="n13"><mxGeometry x="18" y="919" width="344" height="49" as="geometry"/></mxCell>
|
||||||
|
<mxCell id="e40" value="" style="edgeStyle=orthogonalEdgeStyle;rounded=0;html=1;exitX=0.5;exitY=1;exitDx=0;exitDy=0;entryX=0.5;entryY=0;entryDx=0;entryDy=0;strokeColor=#4d4d4d;" edge="1" parent="1" source="n37" target="n39"><mxGeometry relative="1" as="geometry"/></mxCell>
|
||||||
|
<mxCell id="n41" value="<b>TAKE DATA</b> setup_pmon.ttl（9 項）+ show_dmesg.ttl" style="rounded=1;whiteSpace=wrap;html=1;fillColor=#dae8fc;strokeColor=#6c8ebf;align=left;spacingLeft=8;verticalAlign=middle;fontSize=11;" vertex="1" parent="n13"><mxGeometry x="18" y="984" width="344" height="34" as="geometry"/></mxCell>
|
||||||
|
<mxCell id="e42" value="" style="edgeStyle=orthogonalEdgeStyle;rounded=0;html=1;exitX=0.5;exitY=1;exitDx=0;exitDy=0;entryX=0.5;entryY=0;entryDx=0;entryDy=0;strokeColor=#4d4d4d;" edge="1" parent="1" source="n39" target="n41"><mxGeometry relative="1" as="geometry"/></mxCell>
|
||||||
|
<mxCell id="n43" value="<b>10G/1G MGMT Ping</b><br>start → 30s → report → clear" style="rounded=1;whiteSpace=wrap;html=1;fillColor=#dae8fc;strokeColor=#6c8ebf;align=left;spacingLeft=8;verticalAlign=middle;fontSize=11;" vertex="1" parent="n13"><mxGeometry x="18" y="1034" width="344" height="49" as="geometry"/></mxCell>
|
||||||
|
<mxCell id="e44" value="" style="edgeStyle=orthogonalEdgeStyle;rounded=0;html=1;exitX=0.5;exitY=1;exitDx=0;exitDy=0;entryX=0.5;entryY=0;entryDx=0;entryDy=0;strokeColor=#4d4d4d;" edge="1" parent="1" source="n41" target="n43"><mxGeometry relative="1" as="geometry"/></mxCell>
|
||||||
|
<mxCell id="n45" value="<b>NFC Test</b><br>start → status → 30s → stop → report" style="rounded=1;whiteSpace=wrap;html=1;fillColor=#dae8fc;strokeColor=#6c8ebf;align=left;spacingLeft=8;verticalAlign=middle;fontSize=11;" vertex="1" parent="n13"><mxGeometry x="18" y="1099" width="344" height="49" as="geometry"/></mxCell>
|
||||||
|
<mxCell id="e46" value="" style="edgeStyle=orthogonalEdgeStyle;rounded=0;html=1;exitX=0.5;exitY=1;exitDx=0;exitDy=0;entryX=0.5;entryY=0;entryDx=0;entryDy=0;strokeColor=#4d4d4d;" edge="1" parent="1" source="n43" target="n45"><mxGeometry relative="1" as="geometry"/></mxCell>
|
||||||
|
<mxCell id="n47" value="<b>100G Port Status</b> Ethernet513 / 514" style="rounded=1;whiteSpace=wrap;html=1;fillColor=#dae8fc;strokeColor=#6c8ebf;align=left;spacingLeft=8;verticalAlign=middle;fontSize=11;" vertex="1" parent="n13"><mxGeometry x="18" y="1164" width="344" height="34" as="geometry"/></mxCell>
|
||||||
|
<mxCell id="e48" value="" style="edgeStyle=orthogonalEdgeStyle;rounded=0;html=1;exitX=0.5;exitY=1;exitDx=0;exitDy=0;entryX=0.5;entryY=0;entryDx=0;entryDy=0;strokeColor=#4d4d4d;" edge="1" parent="1" source="n45" target="n47"><mxGeometry relative="1" as="geometry"/></mxCell>
|
||||||
|
<mxCell id="n49" value="<b>100G PRBS</b> port_prbs_monitor.sh<br><i>整段註解 — bring-up 中</i>" style="rounded=1;whiteSpace=wrap;html=1;fillColor=#f5f5f5;strokeColor=#999999;dashed=1;align=left;spacingLeft=8;verticalAlign=middle;fontSize=11;fontColor=#808080;" vertex="1" parent="n13"><mxGeometry x="18" y="1214" width="344" height="49" as="geometry"/></mxCell>
|
||||||
|
<mxCell id="e50" value="" style="edgeStyle=orthogonalEdgeStyle;rounded=0;html=1;exitX=0.5;exitY=1;exitDx=0;exitDy=0;entryX=0.5;entryY=0;entryDx=0;entryDy=0;strokeColor=#4d4d4d;" edge="1" parent="1" source="n47" target="n49"><mxGeometry relative="1" as="geometry"/></mxCell>
|
||||||
|
<mxCell id="n51" value="<b>First Traffic Test（基線）</b><br>ps → init → clear → 15s → show → start → 15s → report<br><i>⟨SWB_UNIT⟩ 兩邊 / -u 0 / -u 1 / skip</i>" style="rounded=1;whiteSpace=wrap;html=1;fillColor=#fff2cc;strokeColor=#d6b656;align=left;spacingLeft=8;verticalAlign=middle;fontSize=11;" vertex="1" parent="n13"><mxGeometry x="18" y="1279" width="344" height="64" as="geometry"/></mxCell>
|
||||||
|
<mxCell id="e52" value="" style="edgeStyle=orthogonalEdgeStyle;rounded=0;html=1;exitX=0.5;exitY=1;exitDx=0;exitDy=0;entryX=0.5;entryY=0;entryDx=0;entryDy=0;strokeColor=#4d4d4d;" edge="1" parent="1" source="n49" target="n51"><mxGeometry relative="1" as="geometry"/></mxCell>
|
||||||
|
<mxCell id="n53" value="<b>Show power-on uptime</b>" style="rounded=1;whiteSpace=wrap;html=1;fillColor=#dae8fc;strokeColor=#6c8ebf;align=left;spacingLeft=8;verticalAlign=middle;fontSize=11;" vertex="1" parent="n13"><mxGeometry x="18" y="1359" width="344" height="34" as="geometry"/></mxCell>
|
||||||
|
<mxCell id="e54" value="" style="edgeStyle=orthogonalEdgeStyle;rounded=0;html=1;exitX=0.5;exitY=1;exitDx=0;exitDy=0;entryX=0.5;entryY=0;entryDx=0;entryDy=0;strokeColor=#4d4d4d;" edge="1" parent="1" source="n51" target="n53"><mxGeometry relative="1" as="geometry"/></mxCell>
|
||||||
|
<mxCell id="n55" value="messagebox 『Script A DONE / Start Script B』" style="rounded=1;whiteSpace=wrap;html=1;fillColor=#ffe6cc;strokeColor=#d79b00;align=center;verticalAlign=middle;fontSize=11;fontStyle=1;" vertex="1" parent="n13"><mxGeometry x="18" y="1409" width="344" height="34" as="geometry"/></mxCell>
|
||||||
|
<mxCell id="e56" value="" style="edgeStyle=orthogonalEdgeStyle;rounded=0;html=1;exitX=0.5;exitY=1;exitDx=0;exitDy=0;entryX=0.5;entryY=0;entryDx=0;entryDy=0;strokeColor=#4d4d4d;" edge="1" parent="1" source="n53" target="n55"><mxGeometry relative="1" as="geometry"/></mxCell>
|
||||||
|
<mxCell id="n57" value="Script B — Stress（壓力 soak，人為中斷才結束）" style="swimlane;html=1;startSize=34;fillColor=#ffffff;strokeColor=#4d4d4d;fontSize=14;fontStyle=1;horizontal=1;" vertex="1" parent="1"><mxGeometry x="440" y="96" width="380" height="1014" as="geometry"/></mxCell>
|
||||||
|
<mxCell id="n58" value="<b>include config.ttl</b>" style="rounded=1;whiteSpace=wrap;html=1;fillColor=#fff2cc;strokeColor=#d6b656;align=left;spacingLeft=8;verticalAlign=middle;fontSize=11;" vertex="1" parent="n57"><mxGeometry x="18" y="44" width="344" height="34" as="geometry"/></mxCell>
|
||||||
|
<mxCell id="n59" value="<b>CLEAR EVENT</b>" style="rounded=1;whiteSpace=wrap;html=1;fillColor=#dae8fc;strokeColor=#6c8ebf;align=left;spacingLeft=8;verticalAlign=middle;fontSize=11;" vertex="1" parent="n57"><mxGeometry x="18" y="94" width="344" height="34" as="geometry"/></mxCell>
|
||||||
|
<mxCell id="e60" value="" style="edgeStyle=orthogonalEdgeStyle;rounded=0;html=1;exitX=0.5;exitY=1;exitDx=0;exitDy=0;entryX=0.5;entryY=0;entryDx=0;entryDy=0;strokeColor=#4d4d4d;" edge="1" parent="1" source="n58" target="n59"><mxGeometry relative="1" as="geometry"/></mxCell>
|
||||||
|
<mxCell id="n61" value="<b>AMD CPU Stress</b> mlucas-avx2 -cpu 0:15" style="rounded=1;whiteSpace=wrap;html=1;fillColor=#dae8fc;strokeColor=#6c8ebf;align=left;spacingLeft=8;verticalAlign=middle;fontSize=11;" vertex="1" parent="n57"><mxGeometry x="18" y="144" width="344" height="34" as="geometry"/></mxCell>
|
||||||
|
<mxCell id="e62" value="" style="edgeStyle=orthogonalEdgeStyle;rounded=0;html=1;exitX=0.5;exitY=1;exitDx=0;exitDy=0;entryX=0.5;entryY=0;entryDx=0;entryDy=0;strokeColor=#4d4d4d;" edge="1" parent="1" source="n59" target="n61"><mxGeometry relative="1" as="geometry"/></mxCell>
|
||||||
|
<mxCell id="n63" value="<b>BMC DDR Stress</b> bgctl run bmc-manager memtester" style="rounded=1;whiteSpace=wrap;html=1;fillColor=#dae8fc;strokeColor=#6c8ebf;align=left;spacingLeft=8;verticalAlign=middle;fontSize=11;" vertex="1" parent="n57"><mxGeometry x="18" y="194" width="344" height="34" as="geometry"/></mxCell>
|
||||||
|
<mxCell id="e64" value="" style="edgeStyle=orthogonalEdgeStyle;rounded=0;html=1;exitX=0.5;exitY=1;exitDx=0;exitDy=0;entryX=0.5;entryY=0;entryDx=0;entryDy=0;strokeColor=#4d4d4d;" edge="1" parent="1" source="n61" target="n63"><mxGeometry relative="1" as="geometry"/></mxCell>
|
||||||
|
<mxCell id="n65" value="<b>BMC Monitor</b> bmc_monitor.sh start<br>free -m + I2C 寫入/讀回圖樣測試" style="rounded=1;whiteSpace=wrap;html=1;fillColor=#dae8fc;strokeColor=#6c8ebf;align=left;spacingLeft=8;verticalAlign=middle;fontSize=11;" vertex="1" parent="n57"><mxGeometry x="18" y="244" width="344" height="49" as="geometry"/></mxCell>
|
||||||
|
<mxCell id="e66" value="" style="edgeStyle=orthogonalEdgeStyle;rounded=0;html=1;exitX=0.5;exitY=1;exitDx=0;exitDy=0;entryX=0.5;entryY=0;entryDx=0;entryDy=0;strokeColor=#4d4d4d;" edge="1" parent="1" source="n63" target="n65"><mxGeometry relative="1" as="geometry"/></mxCell>
|
||||||
|
<mxCell id="n67" value="<b>DDR Memory Stress</b> bgctl run memtester" style="rounded=1;whiteSpace=wrap;html=1;fillColor=#dae8fc;strokeColor=#6c8ebf;align=left;spacingLeft=8;verticalAlign=middle;fontSize=11;" vertex="1" parent="n57"><mxGeometry x="18" y="309" width="344" height="34" as="geometry"/></mxCell>
|
||||||
|
<mxCell id="e68" value="" style="edgeStyle=orthogonalEdgeStyle;rounded=0;html=1;exitX=0.5;exitY=1;exitDx=0;exitDy=0;entryX=0.5;entryY=0;entryDx=0;entryDy=0;strokeColor=#4d4d4d;" edge="1" parent="1" source="n65" target="n67"><mxGeometry relative="1" as="geometry"/></mxCell>
|
||||||
|
<mxCell id="n69" value="<b>SSD read/write</b> bgctl run qfx5252-stress-ssd" style="rounded=1;whiteSpace=wrap;html=1;fillColor=#dae8fc;strokeColor=#6c8ebf;align=left;spacingLeft=8;verticalAlign=middle;fontSize=11;" vertex="1" parent="n57"><mxGeometry x="18" y="359" width="344" height="34" as="geometry"/></mxCell>
|
||||||
|
<mxCell id="e70" value="" style="edgeStyle=orthogonalEdgeStyle;rounded=0;html=1;exitX=0.5;exitY=1;exitDx=0;exitDy=0;entryX=0.5;entryY=0;entryDx=0;entryDy=0;strokeColor=#4d4d4d;" edge="1" parent="1" source="n67" target="n69"><mxGeometry relative="1" as="geometry"/></mxCell>
|
||||||
|
<mxCell id="n71" value="<b>USB read/write</b> usb_target.sh -o dev → bgctl run<br>qfx5252-stress-usb" style="rounded=1;whiteSpace=wrap;html=1;fillColor=#dae8fc;strokeColor=#6c8ebf;align=left;spacingLeft=8;verticalAlign=middle;fontSize=11;" vertex="1" parent="n57"><mxGeometry x="18" y="409" width="344" height="49" as="geometry"/></mxCell>
|
||||||
|
<mxCell id="e72" value="" style="edgeStyle=orthogonalEdgeStyle;rounded=0;html=1;exitX=0.5;exitY=1;exitDx=0;exitDy=0;entryX=0.5;entryY=0;entryDx=0;entryDy=0;strokeColor=#4d4d4d;" edge="1" parent="1" source="n69" target="n71"><mxGeometry relative="1" as="geometry"/></mxCell>
|
||||||
|
<mxCell id="n73" value="<b>SHOW Background job</b> bgctl list" style="rounded=1;whiteSpace=wrap;html=1;fillColor=#dae8fc;strokeColor=#6c8ebf;align=left;spacingLeft=8;verticalAlign=middle;fontSize=11;" vertex="1" parent="n57"><mxGeometry x="18" y="474" width="344" height="34" as="geometry"/></mxCell>
|
||||||
|
<mxCell id="e74" value="" style="edgeStyle=orthogonalEdgeStyle;rounded=0;html=1;exitX=0.5;exitY=1;exitDx=0;exitDy=0;entryX=0.5;entryY=0;entryDx=0;entryDy=0;strokeColor=#4d4d4d;" edge="1" parent="1" source="n71" target="n73"><mxGeometry relative="1" as="geometry"/></mxCell>
|
||||||
|
<mxCell id="n75" value="<b>BMC USB Test</b> 偵測 cdc_ncm 介面" style="rounded=1;whiteSpace=wrap;html=1;fillColor=#dae8fc;strokeColor=#6c8ebf;align=left;spacingLeft=8;verticalAlign=middle;fontSize=11;" vertex="1" parent="n57"><mxGeometry x="18" y="524" width="344" height="34" as="geometry"/></mxCell>
|
||||||
|
<mxCell id="e76" value="" style="edgeStyle=orthogonalEdgeStyle;rounded=0;html=1;exitX=0.5;exitY=1;exitDx=0;exitDy=0;entryX=0.5;entryY=0;entryDx=0;entryDy=0;strokeColor=#4d4d4d;" edge="1" parent="1" source="n73" target="n75"><mxGeometry relative="1" as="geometry"/></mxCell>
|
||||||
|
<mxCell id="n77" value="<b>:skip_ping</b> <b>timeout = 0</b>（還原全域逾時）" style="rounded=1;whiteSpace=wrap;html=1;fillColor=#f8cecc;strokeColor=#b85450;align=left;spacingLeft=8;verticalAlign=middle;fontSize=11;" vertex="1" parent="n57"><mxGeometry x="18" y="574" width="344" height="34" as="geometry"/></mxCell>
|
||||||
|
<mxCell id="e78" value="" style="edgeStyle=orthogonalEdgeStyle;rounded=0;html=1;exitX=0.5;exitY=1;exitDx=0;exitDy=0;entryX=0.5;entryY=0;entryDx=0;entryDy=0;strokeColor=#4d4d4d;" edge="1" parent="1" source="n75" target="n77"><mxGeometry relative="1" as="geometry"/></mxCell>
|
||||||
|
<mxCell id="n79" value="<b>10G/1G MGMT Ping</b> start → status" style="rounded=1;whiteSpace=wrap;html=1;fillColor=#dae8fc;strokeColor=#6c8ebf;align=left;spacingLeft=8;verticalAlign=middle;fontSize=11;" vertex="1" parent="n57"><mxGeometry x="18" y="624" width="344" height="34" as="geometry"/></mxCell>
|
||||||
|
<mxCell id="e80" value="" style="edgeStyle=orthogonalEdgeStyle;rounded=0;html=1;exitX=0.5;exitY=1;exitDx=0;exitDy=0;entryX=0.5;entryY=0;entryDx=0;entryDy=0;strokeColor=#4d4d4d;" edge="1" parent="1" source="n77" target="n79"><mxGeometry relative="1" as="geometry"/></mxCell>
|
||||||
|
<mxCell id="n81" value="<b>NFC Test</b> start → status" style="rounded=1;whiteSpace=wrap;html=1;fillColor=#dae8fc;strokeColor=#6c8ebf;align=left;spacingLeft=8;verticalAlign=middle;fontSize=11;" vertex="1" parent="n57"><mxGeometry x="18" y="674" width="344" height="34" as="geometry"/></mxCell>
|
||||||
|
<mxCell id="e82" value="" style="edgeStyle=orthogonalEdgeStyle;rounded=0;html=1;exitX=0.5;exitY=1;exitDx=0;exitDy=0;entryX=0.5;entryY=0;entryDx=0;entryDy=0;strokeColor=#4d4d4d;" edge="1" parent="1" source="n79" target="n81"><mxGeometry relative="1" as="geometry"/></mxCell>
|
||||||
|
<mxCell id="n83" value="<b>100G Port</b> lpmode off · config interface startup" style="rounded=1;whiteSpace=wrap;html=1;fillColor=#dae8fc;strokeColor=#6c8ebf;align=left;spacingLeft=8;verticalAlign=middle;fontSize=11;" vertex="1" parent="n57"><mxGeometry x="18" y="724" width="344" height="34" as="geometry"/></mxCell>
|
||||||
|
<mxCell id="e84" value="" style="edgeStyle=orthogonalEdgeStyle;rounded=0;html=1;exitX=0.5;exitY=1;exitDx=0;exitDy=0;entryX=0.5;entryY=0;entryDx=0;entryDy=0;strokeColor=#4d4d4d;" edge="1" parent="1" source="n81" target="n83"><mxGeometry relative="1" as="geometry"/></mxCell>
|
||||||
|
<mxCell id="n85" value="<b>100G PRBS</b> <i>整段註解 — bring-up 中</i>" style="rounded=1;whiteSpace=wrap;html=1;fillColor=#f5f5f5;strokeColor=#999999;dashed=1;align=left;spacingLeft=8;verticalAlign=middle;fontSize=11;fontColor=#808080;" vertex="1" parent="n57"><mxGeometry x="18" y="774" width="344" height="34" as="geometry"/></mxCell>
|
||||||
|
<mxCell id="e86" value="" style="edgeStyle=orthogonalEdgeStyle;rounded=0;html=1;exitX=0.5;exitY=1;exitDx=0;exitDy=0;entryX=0.5;entryY=0;entryDx=0;entryDy=0;strokeColor=#4d4d4d;" edge="1" parent="1" source="n83" target="n85"><mxGeometry relative="1" as="geometry"/></mxCell>
|
||||||
|
<mxCell id="n87" value="<b>Traffic START</b><br>ps → init → clear → 15s → show → start<br><i>⟨SWB_UNIT⟩ 兩邊 / -u 0 / -u 1 / skip</i>" style="rounded=1;whiteSpace=wrap;html=1;fillColor=#fff2cc;strokeColor=#d6b656;align=left;spacingLeft=8;verticalAlign=middle;fontSize=11;" vertex="1" parent="n57"><mxGeometry x="18" y="824" width="344" height="64" as="geometry"/></mxCell>
|
||||||
|
<mxCell id="e88" value="" style="edgeStyle=orthogonalEdgeStyle;rounded=0;html=1;exitX=0.5;exitY=1;exitDx=0;exitDy=0;entryX=0.5;entryY=0;entryDx=0;entryDy=0;strokeColor=#4d4d4d;" edge="1" parent="1" source="n85" target="n87"><mxGeometry relative="1" as="geometry"/></mxCell>
|
||||||
|
<mxCell id="n89" value="<b>while 1 — soak 監控迴圈</b><br>setup_pmon.ttl（9 項）<br>bgctl list + jobs<br><b>pause 60</b><br><i>V1.1.4 起 margin 移到 Script C</i>" style="rounded=1;whiteSpace=wrap;html=1;fillColor=#d5e8d4;strokeColor=#82b366;align=left;spacingLeft=8;verticalAlign=middle;fontSize=11;" vertex="1" parent="n57"><mxGeometry x="18" y="904" width="344" height="94" as="geometry"/></mxCell>
|
||||||
|
<mxCell id="e90" value="" style="edgeStyle=orthogonalEdgeStyle;rounded=0;html=1;exitX=0.5;exitY=1;exitDx=0;exitDy=0;entryX=0.5;entryY=0;entryDx=0;entryDy=0;strokeColor=#4d4d4d;" edge="1" parent="1" source="n87" target="n89"><mxGeometry relative="1" as="geometry"/></mxCell>
|
||||||
|
<mxCell id="n91" value="Script C — Post-test（收尾 / 判定 / 收 log）" style="swimlane;html=1;startSize=34;fillColor=#ffffff;strokeColor=#4d4d4d;fontSize=14;fontStyle=1;horizontal=1;" vertex="1" parent="1"><mxGeometry x="850" y="96" width="380" height="1259" as="geometry"/></mxCell>
|
||||||
|
<mxCell id="n92" value="<b>include config.ttl</b>" style="rounded=1;whiteSpace=wrap;html=1;fillColor=#fff2cc;strokeColor=#d6b656;align=left;spacingLeft=8;verticalAlign=middle;fontSize=11;" vertex="1" parent="n91"><mxGeometry x="18" y="44" width="344" height="34" as="geometry"/></mxCell>
|
||||||
|
<mxCell id="n93" value="<b>Kill Process</b> utils/kill_all_process.ttl<br>kill $(jobs -p) · bgctl stop --all ×2<br>停 BMC USB service · mgmt_ping stop · <b>nfc stop</b>" style="rounded=1;whiteSpace=wrap;html=1;fillColor=#f8cecc;strokeColor=#b85450;align=left;spacingLeft=8;verticalAlign=middle;fontSize=11;" vertex="1" parent="n91"><mxGeometry x="18" y="94" width="344" height="64" as="geometry"/></mxCell>
|
||||||
|
<mxCell id="e94" value="" style="edgeStyle=orthogonalEdgeStyle;rounded=0;html=1;exitX=0.5;exitY=1;exitDx=0;exitDy=0;entryX=0.5;entryY=0;entryDx=0;entryDy=0;strokeColor=#4d4d4d;" edge="1" parent="1" source="n92" target="n93"><mxGeometry relative="1" as="geometry"/></mxCell>
|
||||||
|
<mxCell id="n95" value="<b>100G PRBS STOP</b> <i>整段註解</i>" style="rounded=1;whiteSpace=wrap;html=1;fillColor=#f5f5f5;strokeColor=#999999;dashed=1;align=left;spacingLeft=8;verticalAlign=middle;fontSize=11;fontColor=#808080;" vertex="1" parent="n91"><mxGeometry x="18" y="174" width="344" height="34" as="geometry"/></mxCell>
|
||||||
|
<mxCell id="e96" value="" style="edgeStyle=orthogonalEdgeStyle;rounded=0;html=1;exitX=0.5;exitY=1;exitDx=0;exitDy=0;entryX=0.5;entryY=0;entryDx=0;entryDy=0;strokeColor=#4d4d4d;" edge="1" parent="1" source="n93" target="n95"><mxGeometry relative="1" as="geometry"/></mxCell>
|
||||||
|
<mxCell id="n97" value="<b>TAKE DATA</b> setup_pmon.ttl + show_dmesg.ttl" style="rounded=1;whiteSpace=wrap;html=1;fillColor=#dae8fc;strokeColor=#6c8ebf;align=left;spacingLeft=8;verticalAlign=middle;fontSize=11;" vertex="1" parent="n91"><mxGeometry x="18" y="224" width="344" height="34" as="geometry"/></mxCell>
|
||||||
|
<mxCell id="e98" value="" style="edgeStyle=orthogonalEdgeStyle;rounded=0;html=1;exitX=0.5;exitY=1;exitDx=0;exitDy=0;entryX=0.5;entryY=0;entryDx=0;entryDy=0;strokeColor=#4d4d4d;" edge="1" parent="1" source="n95" target="n97"><mxGeometry relative="1" as="geometry"/></mxCell>
|
||||||
|
<mxCell id="n99" value="<b>Check PCIe error counters</b> ×7（同 Script A）" style="rounded=1;whiteSpace=wrap;html=1;fillColor=#dae8fc;strokeColor=#6c8ebf;align=left;spacingLeft=8;verticalAlign=middle;fontSize=11;" vertex="1" parent="n91"><mxGeometry x="18" y="274" width="344" height="34" as="geometry"/></mxCell>
|
||||||
|
<mxCell id="e100" value="" style="edgeStyle=orthogonalEdgeStyle;rounded=0;html=1;exitX=0.5;exitY=1;exitDx=0;exitDy=0;entryX=0.5;entryY=0;entryDx=0;entryDy=0;strokeColor=#4d4d4d;" edge="1" parent="1" source="n97" target="n99"><mxGeometry relative="1" as="geometry"/></mxCell>
|
||||||
|
<mxCell id="n101" value="<b>BMC DDR / BMC Monitor 取值</b> cat bmc_ddr.log · bmc_poll.log" style="rounded=1;whiteSpace=wrap;html=1;fillColor=#dae8fc;strokeColor=#6c8ebf;align=left;spacingLeft=8;verticalAlign=middle;fontSize=11;" vertex="1" parent="n91"><mxGeometry x="18" y="324" width="344" height="34" as="geometry"/></mxCell>
|
||||||
|
<mxCell id="e102" value="" style="edgeStyle=orthogonalEdgeStyle;rounded=0;html=1;exitX=0.5;exitY=1;exitDx=0;exitDy=0;entryX=0.5;entryY=0;entryDx=0;entryDy=0;strokeColor=#4d4d4d;" edge="1" parent="1" source="n99" target="n101"><mxGeometry relative="1" as="geometry"/></mxCell>
|
||||||
|
<mxCell id="n103" value="<b>BMC USB Test result</b> journalctl" style="rounded=1;whiteSpace=wrap;html=1;fillColor=#dae8fc;strokeColor=#6c8ebf;align=left;spacingLeft=8;verticalAlign=middle;fontSize=11;" vertex="1" parent="n91"><mxGeometry x="18" y="374" width="344" height="34" as="geometry"/></mxCell>
|
||||||
|
<mxCell id="e104" value="" style="edgeStyle=orthogonalEdgeStyle;rounded=0;html=1;exitX=0.5;exitY=1;exitDx=0;exitDy=0;entryX=0.5;entryY=0;entryDx=0;entryDy=0;strokeColor=#4d4d4d;" edge="1" parent="1" source="n101" target="n103"><mxGeometry relative="1" as="geometry"/></mxCell>
|
||||||
|
<mxCell id="n105" value="<b>CHECK Stress results</b><br>cat mlucas / memtester / ssd / usb log" style="rounded=1;whiteSpace=wrap;html=1;fillColor=#dae8fc;strokeColor=#6c8ebf;align=left;spacingLeft=8;verticalAlign=middle;fontSize=11;" vertex="1" parent="n91"><mxGeometry x="18" y="424" width="344" height="49" as="geometry"/></mxCell>
|
||||||
|
<mxCell id="e106" value="" style="edgeStyle=orthogonalEdgeStyle;rounded=0;html=1;exitX=0.5;exitY=1;exitDx=0;exitDy=0;entryX=0.5;entryY=0;entryDx=0;entryDy=0;strokeColor=#4d4d4d;" edge="1" parent="1" source="n103" target="n105"><mxGeometry relative="1" as="geometry"/></mxCell>
|
||||||
|
<mxCell id="n107" value="<b>10G/1G MGMT result</b> ip -s link show eth0/eth1 · cat log" style="rounded=1;whiteSpace=wrap;html=1;fillColor=#dae8fc;strokeColor=#6c8ebf;align=left;spacingLeft=8;verticalAlign=middle;fontSize=11;" vertex="1" parent="n91"><mxGeometry x="18" y="489" width="344" height="34" as="geometry"/></mxCell>
|
||||||
|
<mxCell id="e108" value="" style="edgeStyle=orthogonalEdgeStyle;rounded=0;html=1;exitX=0.5;exitY=1;exitDx=0;exitDy=0;entryX=0.5;entryY=0;entryDx=0;entryDy=0;strokeColor=#4d4d4d;" edge="1" parent="1" source="n105" target="n107"><mxGeometry relative="1" as="geometry"/></mxCell>
|
||||||
|
<mxCell id="n109" value="<b>NFC Test result</b> nfc_polling.sh report" style="rounded=1;whiteSpace=wrap;html=1;fillColor=#dae8fc;strokeColor=#6c8ebf;align=left;spacingLeft=8;verticalAlign=middle;fontSize=11;" vertex="1" parent="n91"><mxGeometry x="18" y="539" width="344" height="34" as="geometry"/></mxCell>
|
||||||
|
<mxCell id="e110" value="" style="edgeStyle=orthogonalEdgeStyle;rounded=0;html=1;exitX=0.5;exitY=1;exitDx=0;exitDy=0;entryX=0.5;entryY=0;entryDx=0;entryDy=0;strokeColor=#4d4d4d;" edge="1" parent="1" source="n107" target="n109"><mxGeometry relative="1" as="geometry"/></mxCell>
|
||||||
|
<mxCell id="n111" value="<b>100G Port</b> show interfaces status" style="rounded=1;whiteSpace=wrap;html=1;fillColor=#dae8fc;strokeColor=#6c8ebf;align=left;spacingLeft=8;verticalAlign=middle;fontSize=11;" vertex="1" parent="n91"><mxGeometry x="18" y="589" width="344" height="34" as="geometry"/></mxCell>
|
||||||
|
<mxCell id="e112" value="" style="edgeStyle=orthogonalEdgeStyle;rounded=0;html=1;exitX=0.5;exitY=1;exitDx=0;exitDy=0;entryX=0.5;entryY=0;entryDx=0;entryDy=0;strokeColor=#4d4d4d;" edge="1" parent="1" source="n109" target="n111"><mxGeometry relative="1" as="geometry"/></mxCell>
|
||||||
|
<mxCell id="n113" value="<b>CHECK Traffic counters</b><br>stop → report（per-pair TX/RX + ce0）<br><i>⟨SWB_UNIT⟩ 兩邊 / -u 0 / -u 1 / skip</i>" style="rounded=1;whiteSpace=wrap;html=1;fillColor=#fff2cc;strokeColor=#d6b656;align=left;spacingLeft=8;verticalAlign=middle;fontSize=11;" vertex="1" parent="n91"><mxGeometry x="18" y="639" width="344" height="64" as="geometry"/></mxCell>
|
||||||
|
<mxCell id="e114" value="" style="edgeStyle=orthogonalEdgeStyle;rounded=0;html=1;exitX=0.5;exitY=1;exitDx=0;exitDy=0;entryX=0.5;entryY=0;entryDx=0;entryDy=0;strokeColor=#4d4d4d;" edge="1" parent="1" source="n111" target="n113"><mxGeometry relative="1" as="geometry"/></mxCell>
|
||||||
|
<mxCell id="n115" value="<b>BER 掃描</b> blanton_ber.sh<br>init → start → <b>sleep 30</b> → report → stop → clear<br><i>⟨SWB_UNIT⟩ · sleep 30 要與 BER_INTERVAL 同步</i>" style="rounded=1;whiteSpace=wrap;html=1;fillColor=#fff2cc;strokeColor=#d6b656;align=left;spacingLeft=8;verticalAlign=middle;fontSize=11;" vertex="1" parent="n91"><mxGeometry x="18" y="719" width="344" height="64" as="geometry"/></mxCell>
|
||||||
|
<mxCell id="e116" value="" style="edgeStyle=orthogonalEdgeStyle;rounded=0;html=1;exitX=0.5;exitY=1;exitDx=0;exitDy=0;entryX=0.5;entryY=0;entryDx=0;entryDy=0;strokeColor=#4d4d4d;" edge="1" parent="1" source="n113" target="n115"><mxGeometry relative="1" as="geometry"/></mxCell>
|
||||||
|
<mxCell id="n117" value="<b>NVMe Err Info</b> nvme smart-log · smartctl -x" style="rounded=1;whiteSpace=wrap;html=1;fillColor=#dae8fc;strokeColor=#6c8ebf;align=left;spacingLeft=8;verticalAlign=middle;fontSize=11;" vertex="1" parent="n91"><mxGeometry x="18" y="799" width="344" height="34" as="geometry"/></mxCell>
|
||||||
|
<mxCell id="e118" value="" style="edgeStyle=orthogonalEdgeStyle;rounded=0;html=1;exitX=0.5;exitY=1;exitDx=0;exitDy=0;entryX=0.5;entryY=0;entryDx=0;entryDy=0;strokeColor=#4d4d4d;" edge="1" parent="1" source="n115" target="n117"><mxGeometry relative="1" as="geometry"/></mxCell>
|
||||||
|
<mxCell id="n119" value="<b>show reboot-cause</b>" style="rounded=1;whiteSpace=wrap;html=1;fillColor=#dae8fc;strokeColor=#6c8ebf;align=left;spacingLeft=8;verticalAlign=middle;fontSize=11;" vertex="1" parent="n91"><mxGeometry x="18" y="849" width="344" height="34" as="geometry"/></mxCell>
|
||||||
|
<mxCell id="e120" value="" style="edgeStyle=orthogonalEdgeStyle;rounded=0;html=1;exitX=0.5;exitY=1;exitDx=0;exitDy=0;entryX=0.5;entryY=0;entryDx=0;entryDy=0;strokeColor=#4d4d4d;" edge="1" parent="1" source="n117" target="n119"><mxGeometry relative="1" as="geometry"/></mxCell>
|
||||||
|
<mxCell id="n121" value="<b>Check Margin</b> margin_status_all.sh（9 顆）<br><i>⟨EN_Margin = 1⟩ · V1.1.4 從 Script B 移來</i>" style="rounded=1;whiteSpace=wrap;html=1;fillColor=#fff2cc;strokeColor=#d6b656;align=left;spacingLeft=8;verticalAlign=middle;fontSize=11;" vertex="1" parent="n91"><mxGeometry x="18" y="899" width="344" height="49" as="geometry"/></mxCell>
|
||||||
|
<mxCell id="e122" value="" style="edgeStyle=orthogonalEdgeStyle;rounded=0;html=1;exitX=0.5;exitY=1;exitDx=0;exitDy=0;entryX=0.5;entryY=0;entryDx=0;entryDy=0;strokeColor=#4d4d4d;" edge="1" parent="1" source="n119" target="n121"><mxGeometry relative="1" as="geometry"/></mxCell>
|
||||||
|
<mxCell id="n123" value="<b>show uptime</b>" style="rounded=1;whiteSpace=wrap;html=1;fillColor=#dae8fc;strokeColor=#6c8ebf;align=left;spacingLeft=8;verticalAlign=middle;fontSize=11;" vertex="1" parent="n91"><mxGeometry x="18" y="964" width="344" height="34" as="geometry"/></mxCell>
|
||||||
|
<mxCell id="e124" value="" style="edgeStyle=orthogonalEdgeStyle;rounded=0;html=1;exitX=0.5;exitY=1;exitDx=0;exitDy=0;entryX=0.5;entryY=0;entryDx=0;entryDy=0;strokeColor=#4d4d4d;" edge="1" parent="1" source="n121" target="n123"><mxGeometry relative="1" as="geometry"/></mxCell>
|
||||||
|
<mxCell id="n125" value="<b>Copy Stress Log to USB</b><br>usb_target.sh → mount → cp 各 log 進 jobs/<br>→ 帶時戳複製到 /mnt/usb/" style="rounded=1;whiteSpace=wrap;html=1;fillColor=#dae8fc;strokeColor=#6c8ebf;align=left;spacingLeft=8;verticalAlign=middle;fontSize=11;" vertex="1" parent="n91"><mxGeometry x="18" y="1014" width="344" height="64" as="geometry"/></mxCell>
|
||||||
|
<mxCell id="e126" value="" style="edgeStyle=orthogonalEdgeStyle;rounded=0;html=1;exitX=0.5;exitY=1;exitDx=0;exitDy=0;entryX=0.5;entryY=0;entryDx=0;entryDy=0;strokeColor=#4d4d4d;" edge="1" parent="1" source="n123" target="n125"><mxGeometry relative="1" as="geometry"/></mxCell>
|
||||||
|
<mxCell id="n127" value="<b>exit</b> → wait 『Script done』<br>離開 hw-test-session 的 shell" style="rounded=1;whiteSpace=wrap;html=1;fillColor=#dae8fc;strokeColor=#6c8ebf;align=left;spacingLeft=8;verticalAlign=middle;fontSize=11;" vertex="1" parent="n91"><mxGeometry x="18" y="1094" width="344" height="49" as="geometry"/></mxCell>
|
||||||
|
<mxCell id="e128" value="" style="edgeStyle=orthogonalEdgeStyle;rounded=0;html=1;exitX=0.5;exitY=1;exitDx=0;exitDy=0;entryX=0.5;entryY=0;entryDx=0;entryDy=0;strokeColor=#4d4d4d;" edge="1" parent="1" source="n125" target="n127"><mxGeometry relative="1" as="geometry"/></mxCell>
|
||||||
|
<mxCell id="n129" value="<b>hw-test-session finish</b> · bgctl reset --yes" style="rounded=1;whiteSpace=wrap;html=1;fillColor=#dae8fc;strokeColor=#6c8ebf;align=left;spacingLeft=8;verticalAlign=middle;fontSize=11;" vertex="1" parent="n91"><mxGeometry x="18" y="1159" width="344" height="34" as="geometry"/></mxCell>
|
||||||
|
<mxCell id="e130" value="" style="edgeStyle=orthogonalEdgeStyle;rounded=0;html=1;exitX=0.5;exitY=1;exitDx=0;exitDy=0;entryX=0.5;entryY=0;entryDx=0;entryDy=0;strokeColor=#4d4d4d;" edge="1" parent="1" source="n127" target="n129"><mxGeometry relative="1" as="geometry"/></mxCell>
|
||||||
|
<mxCell id="n131" value="messagebox 『GOOD JOB! Test Case DONE』" style="rounded=1;whiteSpace=wrap;html=1;fillColor=#ffe6cc;strokeColor=#d79b00;align=center;verticalAlign=middle;fontSize=11;fontStyle=1;" vertex="1" parent="n91"><mxGeometry x="18" y="1209" width="344" height="34" as="geometry"/></mxCell>
|
||||||
|
<mxCell id="e132" value="" style="edgeStyle=orthogonalEdgeStyle;rounded=0;html=1;exitX=0.5;exitY=1;exitDx=0;exitDy=0;entryX=0.5;entryY=0;entryDx=0;entryDy=0;strokeColor=#4d4d4d;" edge="1" parent="1" source="n129" target="n131"><mxGeometry relative="1" as="geometry"/></mxCell>
|
||||||
|
<mxCell id="n133" value="Script 4 — Thermal &amp; Safety（獨立跑，不接 A/B/C）" style="swimlane;html=1;startSize=34;fillColor=#ffffff;strokeColor=#4d4d4d;fontSize=14;fontStyle=1;horizontal=1;" vertex="1" parent="1"><mxGeometry x="1260" y="96" width="380" height="929" as="geometry"/></mxCell>
|
||||||
|
<mxCell id="n134" value="<b>include config.ttl</b>" style="rounded=1;whiteSpace=wrap;html=1;fillColor=#fff2cc;strokeColor=#d6b656;align=left;spacingLeft=8;verticalAlign=middle;fontSize=11;" vertex="1" parent="n133"><mxGeometry x="18" y="44" width="344" height="34" as="geometry"/></mxCell>
|
||||||
|
<mxCell id="n135" value="<b>logopen</b> <i>⟨EN_log = 1⟩</i>" style="rounded=1;whiteSpace=wrap;html=1;fillColor=#fff2cc;strokeColor=#d6b656;align=left;spacingLeft=8;verticalAlign=middle;fontSize=11;" vertex="1" parent="n133"><mxGeometry x="18" y="94" width="344" height="34" as="geometry"/></mxCell>
|
||||||
|
<mxCell id="e136" value="" style="edgeStyle=orthogonalEdgeStyle;rounded=0;html=1;exitX=0.5;exitY=1;exitDx=0;exitDy=0;entryX=0.5;entryY=0;entryDx=0;entryDy=0;strokeColor=#4d4d4d;" edge="1" parent="1" source="n134" target="n135"><mxGeometry relative="1" as="geometry"/></mxCell>
|
||||||
|
<mxCell id="n137" value="<b>Root Login</b> → sudo -i" style="rounded=1;whiteSpace=wrap;html=1;fillColor=#dae8fc;strokeColor=#6c8ebf;align=left;spacingLeft=8;verticalAlign=middle;fontSize=11;" vertex="1" parent="n133"><mxGeometry x="18" y="144" width="344" height="34" as="geometry"/></mxCell>
|
||||||
|
<mxCell id="e138" value="" style="edgeStyle=orthogonalEdgeStyle;rounded=0;html=1;exitX=0.5;exitY=1;exitDx=0;exitDy=0;entryX=0.5;entryY=0;entryDx=0;entryDy=0;strokeColor=#4d4d4d;" edge="1" parent="1" source="n135" target="n137"><mxGeometry relative="1" as="geometry"/></mxCell>
|
||||||
|
<mxCell id="n139" value="<b>Pre Setting</b> mkdir ./logs · date -s · rm jobs/*" style="rounded=1;whiteSpace=wrap;html=1;fillColor=#dae8fc;strokeColor=#6c8ebf;align=left;spacingLeft=8;verticalAlign=middle;fontSize=11;" vertex="1" parent="n133"><mxGeometry x="18" y="194" width="344" height="34" as="geometry"/></mxCell>
|
||||||
|
<mxCell id="e140" value="" style="edgeStyle=orthogonalEdgeStyle;rounded=0;html=1;exitX=0.5;exitY=1;exitDx=0;exitDy=0;entryX=0.5;entryY=0;entryDx=0;entryDy=0;strokeColor=#4d4d4d;" edge="1" parent="1" source="n137" target="n139"><mxGeometry relative="1" as="geometry"/></mxCell>
|
||||||
|
<mxCell id="n141" value="<b>HW Test Session</b> finish → bgctl reset/stop --all → list<br>→ start → log → status" style="rounded=1;whiteSpace=wrap;html=1;fillColor=#f8cecc;strokeColor=#b85450;align=left;spacingLeft=8;verticalAlign=middle;fontSize=11;" vertex="1" parent="n133"><mxGeometry x="18" y="244" width="344" height="49" as="geometry"/></mxCell>
|
||||||
|
<mxCell id="e142" value="" style="edgeStyle=orthogonalEdgeStyle;rounded=0;html=1;exitX=0.5;exitY=1;exitDx=0;exitDy=0;entryX=0.5;entryY=0;entryDx=0;entryDy=0;strokeColor=#4d4d4d;" edge="1" parent="1" source="n139" target="n141"><mxGeometry relative="1" as="geometry"/></mxCell>
|
||||||
|
<mxCell id="n143" value="<b>FAN SPEED</b> max31790 rebind ×2 → fan-speed-control.sh" style="rounded=1;whiteSpace=wrap;html=1;fillColor=#dae8fc;strokeColor=#6c8ebf;align=left;spacingLeft=8;verticalAlign=middle;fontSize=11;" vertex="1" parent="n133"><mxGeometry x="18" y="309" width="344" height="34" as="geometry"/></mxCell>
|
||||||
|
<mxCell id="e144" value="" style="edgeStyle=orthogonalEdgeStyle;rounded=0;html=1;exitX=0.5;exitY=1;exitDx=0;exitDy=0;entryX=0.5;entryY=0;entryDx=0;entryDy=0;strokeColor=#4d4d4d;" edge="1" parent="1" source="n141" target="n143"><mxGeometry relative="1" as="geometry"/></mxCell>
|
||||||
|
<mxCell id="n145" value="<b>Wait DUT Init</b> utils/wait_init.ttl<br><i>無逾時出口</i>" style="rounded=1;whiteSpace=wrap;html=1;fillColor=#fff2cc;strokeColor=#d6b656;align=left;spacingLeft=8;verticalAlign=middle;fontSize=11;" vertex="1" parent="n133"><mxGeometry x="18" y="359" width="344" height="49" as="geometry"/></mxCell>
|
||||||
|
<mxCell id="e146" value="" style="edgeStyle=orthogonalEdgeStyle;rounded=0;html=1;exitX=0.5;exitY=1;exitDx=0;exitDy=0;entryX=0.5;entryY=0;entryDx=0;entryDy=0;strokeColor=#4d4d4d;" edge="1" parent="1" source="n143" target="n145"><mxGeometry relative="1" as="geometry"/></mxCell>
|
||||||
|
<mxCell id="n147" value="<b>DUT Info</b> boot/version/fwutil/system-memory/service<br>syseeprom · ssdhealth · TPM · NVMe" style="rounded=1;whiteSpace=wrap;html=1;fillColor=#dae8fc;strokeColor=#6c8ebf;align=left;spacingLeft=8;verticalAlign=middle;fontSize=11;" vertex="1" parent="n133"><mxGeometry x="18" y="424" width="344" height="49" as="geometry"/></mxCell>
|
||||||
|
<mxCell id="e148" value="" style="edgeStyle=orthogonalEdgeStyle;rounded=0;html=1;exitX=0.5;exitY=1;exitDx=0;exitDy=0;entryX=0.5;entryY=0;entryDx=0;entryDy=0;strokeColor=#4d4d4d;" edge="1" parent="1" source="n145" target="n147"><mxGeometry relative="1" as="geometry"/></mxCell>
|
||||||
|
<mxCell id="n149" value="<b>BMC</b> enroll · version · status" style="rounded=1;whiteSpace=wrap;html=1;fillColor=#dae8fc;strokeColor=#6c8ebf;align=left;spacingLeft=8;verticalAlign=middle;fontSize=11;" vertex="1" parent="n133"><mxGeometry x="18" y="489" width="344" height="34" as="geometry"/></mxCell>
|
||||||
|
<mxCell id="e150" value="" style="edgeStyle=orthogonalEdgeStyle;rounded=0;html=1;exitX=0.5;exitY=1;exitDx=0;exitDy=0;entryX=0.5;entryY=0;entryDx=0;entryDy=0;strokeColor=#4d4d4d;" edge="1" parent="1" source="n147" target="n149"><mxGeometry relative="1" as="geometry"/></mxCell>
|
||||||
|
<mxCell id="n151" value="<b>CLEAR PCIe Error</b> ×7 + ras-mc-ctl --summary" style="rounded=1;whiteSpace=wrap;html=1;fillColor=#dae8fc;strokeColor=#6c8ebf;align=left;spacingLeft=8;verticalAlign=middle;fontSize=11;" vertex="1" parent="n133"><mxGeometry x="18" y="539" width="344" height="34" as="geometry"/></mxCell>
|
||||||
|
<mxCell id="e152" value="" style="edgeStyle=orthogonalEdgeStyle;rounded=0;html=1;exitX=0.5;exitY=1;exitDx=0;exitDy=0;entryX=0.5;entryY=0;entryDx=0;entryDy=0;strokeColor=#4d4d4d;" edge="1" parent="1" source="n149" target="n151"><mxGeometry relative="1" as="geometry"/></mxCell>
|
||||||
|
<mxCell id="n153" value="<b>PCIe tree / link / bandwidth</b>" style="rounded=1;whiteSpace=wrap;html=1;fillColor=#dae8fc;strokeColor=#6c8ebf;align=left;spacingLeft=8;verticalAlign=middle;fontSize=11;" vertex="1" parent="n133"><mxGeometry x="18" y="589" width="344" height="34" as="geometry"/></mxCell>
|
||||||
|
<mxCell id="e154" value="" style="edgeStyle=orthogonalEdgeStyle;rounded=0;html=1;exitX=0.5;exitY=1;exitDx=0;exitDy=0;entryX=0.5;entryY=0;entryDx=0;entryDy=0;strokeColor=#4d4d4d;" edge="1" parent="1" source="n151" target="n153"><mxGeometry relative="1" as="geometry"/></mxCell>
|
||||||
|
<mxCell id="n155" value="<b>TAKE DATA</b> setup_pmon.ttl + show_dmesg.ttl" style="rounded=1;whiteSpace=wrap;html=1;fillColor=#dae8fc;strokeColor=#6c8ebf;align=left;spacingLeft=8;verticalAlign=middle;fontSize=11;" vertex="1" parent="n133"><mxGeometry x="18" y="639" width="344" height="34" as="geometry"/></mxCell>
|
||||||
|
<mxCell id="e156" value="" style="edgeStyle=orthogonalEdgeStyle;rounded=0;html=1;exitX=0.5;exitY=1;exitDx=0;exitDy=0;entryX=0.5;entryY=0;entryDx=0;entryDy=0;strokeColor=#4d4d4d;" edge="1" parent="1" source="n153" target="n155"><mxGeometry relative="1" as="geometry"/></mxCell>
|
||||||
|
<mxCell id="n157" value="<b>Full Load — CPU</b><br>chmod +x → mlucas-avx2 -s l -cpu 0:15 &amp;" style="rounded=1;whiteSpace=wrap;html=1;fillColor=#dae8fc;strokeColor=#6c8ebf;align=left;spacingLeft=8;verticalAlign=middle;fontSize=11;" vertex="1" parent="n133"><mxGeometry x="18" y="689" width="344" height="49" as="geometry"/></mxCell>
|
||||||
|
<mxCell id="e158" value="" style="edgeStyle=orthogonalEdgeStyle;rounded=0;html=1;exitX=0.5;exitY=1;exitDx=0;exitDy=0;entryX=0.5;entryY=0;entryDx=0;entryDy=0;strokeColor=#4d4d4d;" edge="1" parent="1" source="n155" target="n157"><mxGeometry relative="1" as="geometry"/></mxCell>
|
||||||
|
<mxCell id="n159" value="<b>Full Load — 資料面</b><br>blanton_tr518.sh start（含 120s settle）" style="rounded=1;whiteSpace=wrap;html=1;fillColor=#f8cecc;strokeColor=#b85450;align=left;spacingLeft=8;verticalAlign=middle;fontSize=11;" vertex="1" parent="n133"><mxGeometry x="18" y="754" width="344" height="49" as="geometry"/></mxCell>
|
||||||
|
<mxCell id="e160" value="" style="edgeStyle=orthogonalEdgeStyle;rounded=0;html=1;exitX=0.5;exitY=1;exitDx=0;exitDy=0;entryX=0.5;entryY=0;entryDx=0;entryDy=0;strokeColor=#4d4d4d;" edge="1" parent="1" source="n157" target="n159"><mxGeometry relative="1" as="geometry"/></mxCell>
|
||||||
|
<mxCell id="n161" value="<b>while 1 — 熱 / 安規監控迴圈</b><br>setup_pmon.ttl（9 項）<br>TH6_SWB0 / SWB1_power_readback.sh<br>bgctl list + jobs<br><b>pause 60</b>" style="rounded=1;whiteSpace=wrap;html=1;fillColor=#d5e8d4;strokeColor=#82b366;align=left;spacingLeft=8;verticalAlign=middle;fontSize=11;" vertex="1" parent="n133"><mxGeometry x="18" y="819" width="344" height="94" as="geometry"/></mxCell>
|
||||||
|
<mxCell id="e162" value="" style="edgeStyle=orthogonalEdgeStyle;rounded=0;html=1;exitX=0.5;exitY=1;exitDx=0;exitDy=0;entryX=0.5;entryY=0;entryDx=0;entryDy=0;strokeColor=#4d4d4d;" edge="1" parent="1" source="n159" target="n161"><mxGeometry relative="1" as="geometry"/></mxCell>
|
||||||
|
<mxCell id="e163" value="人工啟動 Script B" style="edgeStyle=orthogonalEdgeStyle;rounded=1;html=1;strokeColor=#d79b00;strokeWidth=2;dashed=1;fontSize=10;fontColor=#d79b00;" edge="1" parent="1" source="n55" target="n58"><mxGeometry relative="1" as="geometry"/></mxCell>
|
||||||
|
<mxCell id="e164" value="soak 結束後人工中斷，啟動 Script C" style="edgeStyle=orthogonalEdgeStyle;rounded=1;html=1;strokeColor=#d79b00;strokeWidth=2;dashed=1;fontSize=10;fontColor=#d79b00;" edge="1" parent="1" source="n89" target="n92"><mxGeometry relative="1" as="geometry"/></mxCell>
|
||||||
|
<mxCell id="n165" value="圖例" style="text;html=1;align=left;verticalAlign=middle;fontSize=13;fontStyle=1;" vertex="1" parent="1"><mxGeometry x="30" y="1585" width="200" height="24" as="geometry"/></mxCell>
|
||||||
|
<mxCell id="n166" value="一般步驟" style="rounded=1;whiteSpace=wrap;html=1;fillColor=#dae8fc;strokeColor=#6c8ebf;align=left;spacingLeft=8;verticalAlign=middle;fontSize=11;" vertex="1" parent="1"><mxGeometry x="30" y="1613" width="230" height="32" as="geometry"/></mxCell>
|
||||||
|
<mxCell id="n167" value="受 config.ttl 旗標影響" style="rounded=1;whiteSpace=wrap;html=1;fillColor=#fff2cc;strokeColor=#d6b656;align=left;spacingLeft=8;verticalAlign=middle;fontSize=11;" vertex="1" parent="1"><mxGeometry x="280" y="1613" width="230" height="32" as="geometry"/></mxCell>
|
||||||
|
<mxCell id="n168" value="迴圈 / 持續執行" style="rounded=1;whiteSpace=wrap;html=1;fillColor=#d5e8d4;strokeColor=#82b366;align=left;spacingLeft=8;verticalAlign=middle;fontSize=11;" vertex="1" parent="1"><mxGeometry x="530" y="1613" width="230" height="32" as="geometry"/></mxCell>
|
||||||
|
<mxCell id="n169" value="目前註解停用" style="rounded=1;whiteSpace=wrap;html=1;fillColor=#f5f5f5;strokeColor=#999999;dashed=1;align=left;spacingLeft=8;verticalAlign=middle;fontSize=11;fontColor=#808080;" vertex="1" parent="1"><mxGeometry x="30" y="1655" width="230" height="32" as="geometry"/></mxCell>
|
||||||
|
<mxCell id="n170" value="狀態變更 / 需留意" style="rounded=1;whiteSpace=wrap;html=1;fillColor=#f8cecc;strokeColor=#b85450;align=left;spacingLeft=8;verticalAlign=middle;fontSize=11;" vertex="1" parent="1"><mxGeometry x="280" y="1655" width="230" height="32" as="geometry"/></mxCell>
|
||||||
|
<mxCell id="n171" value="人工交接點" style="rounded=1;whiteSpace=wrap;html=1;fillColor=#ffe6cc;strokeColor=#d79b00;align=center;verticalAlign=middle;fontSize=11;fontStyle=1;" vertex="1" parent="1"><mxGeometry x="530" y="1655" width="230" height="32" as="geometry"/></mxCell>
|
||||||
|
<mxCell id="n172" value="⚠️ 已知待辦：① 100G PRBS 三支腳本內呼叫仍註解（bring-up 中） ② wait_init.ttl 與風扇確認 wait 沒有逾時出口，起不來會無限等待 ③ Script C 的 sleep 30 需與 blanton_ber.sh 的 BER_INTERVAL 同步 ④ Script 4 沒有收尾段：中斷後 tr518 留下 port cd lb=mac / l2 learn off / test mode nr=yes，需手動 blanton_tr518.sh stop" style="text;html=1;align=left;verticalAlign=top;fontSize=11;fontColor=#b85450;" vertex="1" parent="1"><mxGeometry x="30" y="1703" width="1610" height="46" as="geometry"/></mxCell>
|
||||||
|
</root>
|
||||||
|
</mxGraphModel>
|
||||||
|
</diagram>
|
||||||
|
</mxfile>
|
||||||
@@ -0,0 +1,61 @@
|
|||||||
|
# v1.1.4 — A thermal and safety run that loads the box and watches the rails
|
||||||
|
|
||||||
|
## ✨ New features
|
||||||
|
|
||||||
|
**`4_Blanton_Script_thermal_safety.ttl`**
|
||||||
|
* A **standalone** script — it is not part of the A → B → C chain and is not started by any of them. Run it on its own when the question is thermal or safety rather than functional.
|
||||||
|
* Brings the DUT up the same way Script A does (login, session reset, fan speed, `wait_init`, DUT inventory, BMC, PCIe error clear, `pcie_bus`, PMON, dmesg), then loads it: `mlucas-avx2 -cpu 0:15` in the background and `blanton_tr518.sh start` on the data plane.
|
||||||
|
* Then loops every minute: platform data, **both switch boards' rail power** via `TH6_SWB0/1_power_readback.sh`, and `bgctl list` / `jobs`. That is the point of the script — power per rail under sustained full load, sampled over hours.
|
||||||
|
* **It has no teardown.** When you interrupt it the DUT is still in `port cd lb=mac`, `l2 learn off` and `test mode nr=yes`, and `mlucas-avx2` is still running. Run `blanton_tr518.sh stop` and `kill $(jobs -p)` before anything else uses the box — nothing in `show interfaces status` reveals the leftover state.
|
||||||
|
* **It cannot share a DUT with Script B.** Both take over the `cd` ports.
|
||||||
|
|
||||||
|
**Test flow diagram**
|
||||||
|
* `docs/Blanton_Test_Flow.drawio` draws all four scripts side by side, with the config flags that change each step marked, the one real `goto` in Script B drawn, and the manual handoffs between A → B → C shown as such.
|
||||||
|
|
||||||
|
## 🐛 Bug fixes
|
||||||
|
|
||||||
|
**The soak loop spent most of its minute reading margin**
|
||||||
|
* Script B's per-round loop is meant to be a quick sample. `margin_status_all.sh` walks nine LTC2980s over I2C and dominated the round. The scan moved to Script C, which takes it once before `show uptime`.
|
||||||
|
* **The trade-off is real and worth knowing**: margin is now only measured at the start (Script A) and the end (Script C). Drift that happens *during* the soak is no longer visible.
|
||||||
|
|
||||||
|
**`hw-test-session finish` ran from inside the session's own shell**
|
||||||
|
* Script C now sends `exit` and waits for `Script done` first, so `finish` runs in the login shell that opened the session.
|
||||||
|
|
||||||
|
**The new script arrived with LF line endings**
|
||||||
|
* Every other `.ttl` in the repo is CRLF, and `.gitattributes` marks `*.ttl` as `-text` — whatever is committed is exactly what Tera Term gets. Converted to CRLF to match.
|
||||||
|
|
||||||
|
## 📦 Downloads
|
||||||
|
|
||||||
|
| File | Contents |
|
||||||
|
|---|---|
|
||||||
|
| `Script_ABC_Blanton_V1.1.4.zip` | The full Tera Term working directory, including `Blanton_Script/` to copy onto the DUT |
|
||||||
|
|
||||||
|
**After copying to the DUT:**
|
||||||
|
|
||||||
|
```bash
|
||||||
|
chmod +x ~/Blanton_Script/*.sh # see below
|
||||||
|
grep -rlU $'\r' ~/Blanton_Script # expect no output
|
||||||
|
```
|
||||||
|
|
||||||
|
`blanton_ber.sh`, `nfc_polling.sh`, `blanton_tr518.sh` and the two `TH6_SWB*_power_readback.sh` are invoked through `./` or `~/`, so they need the execute bit along with `bmc_monitor.sh` and `usb_target.sh` — neither git nor a Windows/USB copy carries it reliably.
|
||||||
|
|
||||||
|
## ⚠️ Before you run
|
||||||
|
|
||||||
|
* **Script 4 leaves the switch loaded and looped back.** Always finish with `blanton_tr518.sh stop`. If the next test starts without it, traffic and BER results are meaningless and nothing warns you.
|
||||||
|
* **Do not run Script 4 and Script B on the same DUT.** Same ports, same L2 settings.
|
||||||
|
* **Margin is no longer sampled during the soak** — only Script A (start) and Script C (end).
|
||||||
|
* **Re-baseline your margin limits if you have not already**: `VNOM` became the measured median in v1.1.3, which moved both the deviation % and the margin window.
|
||||||
|
* **These three cannot share the switch**: `blanton_ber.sh`, `blanton_tr518.sh`, `blanton_traffic_linespeed`.
|
||||||
|
* **PRBS takes the links down** while `blanton_ber.sh` is armed.
|
||||||
|
* **`ce0` keeps circulating until you stop it.**
|
||||||
|
* **Two numbers must stay in step**: Script C's `sleep 30` and `blanton_ber.sh`'s `BER_INTERVAL`.
|
||||||
|
* **`FAN_SPEED` is 100** — relevant here more than anywhere: a thermal run at full fan is not the same test as one at 30%.
|
||||||
|
* **The three items listed as unverified in v1.1.0 are still unverified**: the `ce0` ingress mirror, the 120s settle in `blanton_tr518.sh`, and `test mode nr=no` on stop. The settle matters most for this release — Script 4 depends on `tr 518` still driving traffic minutes after it was started.
|
||||||
|
|
||||||
|
## 🔗 Links
|
||||||
|
|
||||||
|
* [Blanton_Test_Flow.drawio](https://etgit.et-wen.com/etwen/Blanton_TTL_Script/src/branch/main/docs/Blanton_Test_Flow.drawio) — the four scripts side by side
|
||||||
|
* [ARCHITECTURE.md](https://etgit.et-wen.com/etwen/Blanton_TTL_Script/src/branch/main/ARCHITECTURE.md) — test flow, data models, constraints
|
||||||
|
* [CLAUDE.md](https://etgit.et-wen.com/etwen/Blanton_TTL_Script/src/branch/main/CLAUDE.md) — commands and the bench gotchas
|
||||||
|
|
||||||
|
**Full changelog:** [V1.1.3...V1.1.4](https://etgit.et-wen.com/etwen/Blanton_TTL_Script/compare/V1.1.3...V1.1.4)
|
||||||
@@ -0,0 +1,67 @@
|
|||||||
|
# v1.1.5 — The stress jobs now last the whole soak
|
||||||
|
|
||||||
|
## 🐛 Bug fixes
|
||||||
|
|
||||||
|
**USB stress ran for sixty seconds of an overnight soak**
|
||||||
|
* `qfx5252-stress-usb` was started with `--runtime 60`. It finished a minute in and the USB path sat idle for the rest of the night. Nothing failed, nothing said so, and the run looked complete.
|
||||||
|
* SSD stress had the same shape at `--runtime 3600` — one hour of a soak that usually runs far longer.
|
||||||
|
* Both are now `--runtime 86400`, and the BMC DDR memtester lost its loop count (`64M 1` → `64M`) so it runs until it is stopped rather than finishing one pass.
|
||||||
|
* **86400 is 24 hours, not "forever".** A soak longer than a day leaves SSD and USB dead for the remainder. Script B prints `bgctl list` every round (since v1.0.10), so the shorter list is visible there — but nothing raises an alarm.
|
||||||
|
|
||||||
|
## ✨ New features
|
||||||
|
|
||||||
|
**Multiphase VRM margin**
|
||||||
|
* New `blanton_multiphase_margin.sh` drives the multiphase controllers on both switch boards over the native i2c buses — SWB0 on `/dev/i2c-13` and `-15`, SWB1 on `-14` and `-16`. 19 rails per board, 38 in all.
|
||||||
|
* `high3` / `low3` / `comboA` / `comboB` set the voltages and report one line per rail:
|
||||||
|
|
||||||
|
```
|
||||||
|
SWB0_0V9_ANLG0 - 0.930V Configure Done
|
||||||
|
SWB0_0V75_ANLG0 - 0.775V Configure Done
|
||||||
|
...
|
||||||
|
[ OK ] high3: 38 rail(s) configured
|
||||||
|
```
|
||||||
|
* `save` commits them. It has no per-rail mapping, so it reports as one operation: `Multiphase Save All`.
|
||||||
|
* `-u 0` / `-u 1` for a single board; rails belonging to the other board are skipped and counted separately, not failed.
|
||||||
|
* **`save` writes NVM permanently** (PMBus `STORE_USER_ALL`, and `0x17` on the TH6 core rail). A power cycle does not undo it.
|
||||||
|
* **These are not the LTC2980s that `margin.sh` drives.** The two tools reach the same rails from different sides and each assumes it is the only writer. There is no interlock — do not run both.
|
||||||
|
|
||||||
|
**Traffic bursts carry a random pattern**
|
||||||
|
* `blanton_traffic_linespeed` v0.7.0 appends `PatternRandom=yes` to every `tx`, `ce0` included. A fixed pattern can sit on a benign bit sequence for an entire run; a changing one is what makes a weak lane show itself.
|
||||||
|
* `-r no` forces the fixed pattern; `-r ""` leaves the argument off entirely, which is the pre-v0.7.0 wire format if a future SDK rejects it.
|
||||||
|
* Defaults change from `tx 100 length=512` to `tx 200 length=324`.
|
||||||
|
* **Counter totals are not comparable across this build**: 64800 bytes per burst instead of 51200, about 27% more. The PASS/FAIL cross-check compares a pair against each other and is unaffected — only absolute figures moved.
|
||||||
|
|
||||||
|
## 📦 Downloads
|
||||||
|
|
||||||
|
| File | Contents |
|
||||||
|
|---|---|
|
||||||
|
| `Script_ABC_Blanton_V1.1.5.zip` | The full Tera Term working directory, including `Blanton_Script/` to copy onto the DUT |
|
||||||
|
|
||||||
|
**After copying to the DUT:**
|
||||||
|
|
||||||
|
```bash
|
||||||
|
chmod +x ~/Blanton_Script/*.sh # see below
|
||||||
|
grep -rlU $'\r' ~/Blanton_Script # expect no output
|
||||||
|
```
|
||||||
|
|
||||||
|
`blanton_ber.sh`, `nfc_polling.sh`, `blanton_tr518.sh`, `blanton_multiphase_margin.sh` and the two `TH6_SWB*_power_readback.sh` are invoked through `./` or `~/`, so they need the execute bit along with `bmc_monitor.sh` and `usb_target.sh` — neither git nor a Windows/USB copy carries it reliably.
|
||||||
|
|
||||||
|
## ⚠️ Before you run
|
||||||
|
|
||||||
|
* **A soak longer than 24 hours needs the runtimes raised.** `--runtime 86400` is a ceiling; past it, SSD and USB are idle and only a shorter `bgctl list` hints at it.
|
||||||
|
* **`blanton_multiphase_margin.sh save` is permanent.** Read the rails back before committing, and never run it during a test.
|
||||||
|
* **Do not mix `blanton_multiphase_margin.sh` and `margin.sh`** — same rails, two different access paths, no interlock.
|
||||||
|
* **Traffic counters changed scale.** Any absolute thresholds taken from earlier logs need redoing.
|
||||||
|
* **Script 4 (thermal/safety) has no teardown** — finish with `blanton_tr518.sh stop` and `kill $(jobs -p)`.
|
||||||
|
* **These three cannot share the switch**: `blanton_ber.sh`, `blanton_tr518.sh`, `blanton_traffic_linespeed`.
|
||||||
|
* **Margin is only sampled at the start and end of a soak** (since v1.1.4), not during it.
|
||||||
|
* **`FAN_SPEED` is 100** — the fans run flat out unless you change `config.ttl`.
|
||||||
|
* **The three items listed as unverified in v1.1.0 are still unverified**: the `ce0` ingress mirror, the 120s settle in `blanton_tr518.sh`, and `test mode nr=no` on stop.
|
||||||
|
|
||||||
|
## 🔗 Links
|
||||||
|
|
||||||
|
* [Blanton_Test_Flow.drawio](https://etgit.et-wen.com/etwen/Blanton_TTL_Script/src/branch/main/docs/Blanton_Test_Flow.drawio) — the four scripts side by side
|
||||||
|
* [ARCHITECTURE.md](https://etgit.et-wen.com/etwen/Blanton_TTL_Script/src/branch/main/ARCHITECTURE.md) — test flow, data models, constraints
|
||||||
|
* [CLAUDE.md](https://etgit.et-wen.com/etwen/Blanton_TTL_Script/src/branch/main/CLAUDE.md) — commands and the bench gotchas
|
||||||
|
|
||||||
|
**Full changelog:** [V1.1.4...V1.1.5](https://etgit.et-wen.com/etwen/Blanton_TTL_Script/compare/V1.1.4...V1.1.5)
|
||||||
@@ -1,7 +1,7 @@
|
|||||||
; =============================================================================
|
; =============================================================================
|
||||||
; Script A for Blanton
|
; Script A for Blanton
|
||||||
; Version : V1.1.3
|
; Version : V1.1.5
|
||||||
; Date : 2026-08-30
|
; Date : 2026-09-01
|
||||||
; Author : ETWen
|
; Author : ETWen
|
||||||
; =============================================================================
|
; =============================================================================
|
||||||
; Version History:
|
; Version History:
|
||||||
@@ -178,6 +178,61 @@
|
|||||||
; board at comboA, which this change deleted - all 9
|
; board at comboA, which this change deleted - all 9
|
||||||
; boards would have failed with "Profile not found"
|
; boards would have failed with "Profile not found"
|
||||||
; docs/LTC2980_channel_map.csv Regenerated (tools/gen_channel_map.sh) - it is output
|
; docs/LTC2980_channel_map.csv Regenerated (tools/gen_channel_map.sh) - it is output
|
||||||
|
; V1.1.4 2026-08-31 4_Blanton_Script_thermal_safety.ttl Add the thermal / safety run - a STANDALONE script,
|
||||||
|
; not part of the A -> B -> C chain
|
||||||
|
; Script A style setup (login, session, fan, wait_init,
|
||||||
|
; DUT info, BMC, PCIe clear, pcie_bus, pmon, dmesg)
|
||||||
|
; then FULL LOAD: mlucas-avx2 -cpu 0:15 in the
|
||||||
|
; background + blanton_tr518.sh start
|
||||||
|
; then while 1: setup_pmon + TH6_SWB0/SWB1 power
|
||||||
|
; readback + bgctl list + jobs, pause 60
|
||||||
|
; !! no teardown section: after you interrupt it the
|
||||||
|
; unit is still on port cd lb=mac / l2 learn off /
|
||||||
|
; test mode nr=yes - run blanton_tr518.sh stop
|
||||||
|
; !! it drives the same ports as traffic and BER, so it
|
||||||
|
; cannot share a DUT with Script B
|
||||||
|
; ScriptB Drop the margin scan from the soak loop
|
||||||
|
; The loop is a fast per-minute sample; margin_status
|
||||||
|
; walks 9 LTC2980 over I2C and dominated the round
|
||||||
|
; ScriptC Take the margin scan instead, once, before uptime
|
||||||
|
; Trade-off: no margin drift DURING the soak any more,
|
||||||
|
; only a start (Script A) and end (Script C) reading
|
||||||
|
; ScriptC exit + wait "Script done" before hw-test-session
|
||||||
|
; finish - leaves the session shell first, so finish
|
||||||
|
; runs in the login shell that opened it
|
||||||
|
; docs/Blanton_Test_Flow.drawio Add the A/B/C + thermal flow diagram
|
||||||
|
; V1.1.5 2026-09-01 ScriptB Stress jobs now last the whole soak
|
||||||
|
; BMC DDR memtester 64M 1 -> 64M (loop count
|
||||||
|
; dropped = runs until stopped)
|
||||||
|
; SSD --runtime 3600 -> 86400
|
||||||
|
; USB --runtime 60 -> 86400
|
||||||
|
; The USB one finished after 60 SECONDS, so an
|
||||||
|
; overnight run had USB idle for all but the first
|
||||||
|
; minute and nothing said so
|
||||||
|
; !! 86400 is 24h: a soak longer than that leaves SSD
|
||||||
|
; and USB dead for the remainder - the per-round
|
||||||
|
; bgctl list (V1.0.10) is where that shows up
|
||||||
|
; Blanton_Script/blanton_multiphase_margin.sh Add multiphase VRM margin over the native i2c buses
|
||||||
|
; high3 / low3 / comboA / comboB / save, -u 0|1|all
|
||||||
|
; 38 rails (19 per SWB), one line each:
|
||||||
|
; SWB0_0V9_ANLG0 - 0.930V Configure Done
|
||||||
|
; save has no per-rail map, prints Multiphase Save All
|
||||||
|
; !! save is STORE_USER_ALL - permanent, survives a
|
||||||
|
; power cycle
|
||||||
|
; !! these are NOT the LTC2980s margin.sh drives; the
|
||||||
|
; two tools reach the same rails from different
|
||||||
|
; sides - do not run both
|
||||||
|
; Blanton_Script/blanton_traffic_linespeed.sh v0.7.0 tx gains PatternRandom, defaults change
|
||||||
|
; tx 100 length=512 -> tx 200 length=324
|
||||||
|
; every burst now ends PatternRandom=yes, ce0 included
|
||||||
|
; A fixed pattern can sit on a benign bit sequence for
|
||||||
|
; a whole run; random is what exposes a weak lane
|
||||||
|
; -r no forces the fixed pattern, -r "" omits the
|
||||||
|
; argument entirely (pre-v0.7.0 wire format)
|
||||||
|
; !! bytes per burst went 51200 -> 64800 (+27%), so
|
||||||
|
; counter totals are not comparable across this
|
||||||
|
; build - the PASS/FAIL cross-check is unaffected
|
||||||
|
; tools/Multiphase_*.txt Bench command references for the new script
|
||||||
; =============================================================================
|
; =============================================================================
|
||||||
include "config.ttl"
|
include "config.ttl"
|
||||||
|
|
||||||
|
|||||||
@@ -26,7 +26,8 @@ sendln "~/hammer/tools/amd/mlucas-avx2 -s l -cpu 0:15 > ~/hammer/tools/amd/mluca
|
|||||||
;wait prompt_sonic_root
|
;wait prompt_sonic_root
|
||||||
;sendln "./Blanton_Script/bmc_monitor.sh start"
|
;sendln "./Blanton_Script/bmc_monitor.sh start"
|
||||||
wait prompt_sonic_root
|
wait prompt_sonic_root
|
||||||
sendln "bgctl run bmc-manager run '/usr/bin/memtester 64M 1'"
|
;sendln "bgctl run bmc-manager run '/usr/bin/memtester 64M 1'"
|
||||||
|
sendln "bgctl run bmc-manager run '/usr/bin/memtester 64M'" ; Continue Execture
|
||||||
|
|
||||||
; ========== BMC Monitor Test ==========
|
; ========== BMC Monitor Test ==========
|
||||||
wait prompt_sonic_root
|
wait prompt_sonic_root
|
||||||
@@ -40,7 +41,7 @@ sendln "bgctl run /usr/sbin/memtester 1G" ; Continue Execture
|
|||||||
|
|
||||||
; ========== SSD read/write ==========
|
; ========== SSD read/write ==========
|
||||||
wait prompt_sonic_root
|
wait prompt_sonic_root
|
||||||
sendln "bgctl run qfx5252-stress-ssd 1G --runtime 3600 --passes 5 --write --force --log /host/hw-eval/jobs/qfx5252-stress-ssd.log"
|
sendln "bgctl run qfx5252-stress-ssd 1G --runtime 86400 --passes 5 --write --force --log /host/hw-eval/jobs/qfx5252-stress-ssd.log"
|
||||||
|
|
||||||
; ========== USB read/write ==========
|
; ========== USB read/write ==========
|
||||||
; ---- Get USB partition node -> usb_dev ----
|
; ---- Get USB partition node -> usb_dev ----
|
||||||
@@ -51,7 +52,7 @@ waitregex '<<DEV=([^>]*)>>'
|
|||||||
usb_dev = groupmatchstr1
|
usb_dev = groupmatchstr1
|
||||||
|
|
||||||
wait prompt_sonic_root
|
wait prompt_sonic_root
|
||||||
sprintf2 cmd "bgctl run qfx5252-stress-usb %s 256M --runtime 60 --passes 1 --write --log /host/hw-eval/jobs/qfx5252-stress-usb.log" usb_dev
|
sprintf2 cmd "bgctl run qfx5252-stress-usb %s 256M --runtime 86400 --passes 1 --write --log /host/hw-eval/jobs/qfx5252-stress-usb.log" usb_dev
|
||||||
sendln cmd
|
sendln cmd
|
||||||
|
|
||||||
;wait prompt_sonic_root
|
;wait prompt_sonic_root
|
||||||
@@ -174,9 +175,5 @@ while 1
|
|||||||
sendln "bgctl list"
|
sendln "bgctl list"
|
||||||
wait prompt_sonic_root
|
wait prompt_sonic_root
|
||||||
sendln "jobs"
|
sendln "jobs"
|
||||||
; ========== Check Margin ==========
|
|
||||||
if EN_Margin = 1 then
|
|
||||||
include "utils/show_margin_status.ttl"
|
|
||||||
endif
|
|
||||||
pause 60
|
pause 60
|
||||||
endwhile
|
endwhile
|
||||||
|
|||||||
@@ -184,6 +184,11 @@ sendln "/usr/sbin/smartctl -x /dev/nvme0"
|
|||||||
wait prompt_sonic_root
|
wait prompt_sonic_root
|
||||||
sendln "show reboot-cause"
|
sendln "show reboot-cause"
|
||||||
|
|
||||||
|
; ========== Check Margin ==========
|
||||||
|
if EN_Margin = 1 then
|
||||||
|
include "utils/show_margin_status.ttl"
|
||||||
|
endif
|
||||||
|
|
||||||
; ========== Show Power on uptime ==========
|
; ========== Show Power on uptime ==========
|
||||||
wait prompt_sonic_root
|
wait prompt_sonic_root
|
||||||
sendln "show uptime"
|
sendln "show uptime"
|
||||||
@@ -219,6 +224,9 @@ sendln cmd
|
|||||||
|
|
||||||
; ========== HW Test Session ==========
|
; ========== HW Test Session ==========
|
||||||
wait prompt_sonic_root
|
wait prompt_sonic_root
|
||||||
|
sendln "exit"
|
||||||
|
wait "Script done"
|
||||||
|
wait prompt_sonic_root
|
||||||
sendln "hw-test-session finish"
|
sendln "hw-test-session finish"
|
||||||
wait prompt_sonic_root
|
wait prompt_sonic_root
|
||||||
sendln "bgctl reset --yes"
|
sendln "bgctl reset --yes"
|
||||||
|
|||||||
@@ -0,0 +1,158 @@
|
|||||||
|
include "config.ttl"
|
||||||
|
|
||||||
|
flushrecv
|
||||||
|
;================================================================
|
||||||
|
; Log File Creation
|
||||||
|
;================================================================
|
||||||
|
gettime str_starttime "%Y%m%d-%H%M%S"
|
||||||
|
getdir mdir
|
||||||
|
|
||||||
|
if EN_log = 1 then
|
||||||
|
sprintf2 filename '%s\Logs\%s_%s_%s.log' mdir project_name strTestcase str_starttime
|
||||||
|
logopen filename 0 1 1 1
|
||||||
|
endif
|
||||||
|
|
||||||
|
; ========== Root Login ==========
|
||||||
|
wait prompt_login
|
||||||
|
sendln "admin"
|
||||||
|
wait "Password:"
|
||||||
|
sendln "YourPaSsWoRd"
|
||||||
|
wait prompt_sonic
|
||||||
|
sendln "sudo -i"
|
||||||
|
|
||||||
|
; ========== Pre Setting ==========
|
||||||
|
; Make log directory
|
||||||
|
wait prompt_sonic_root
|
||||||
|
sendln "mkdir ./logs"
|
||||||
|
|
||||||
|
; Setting System Time
|
||||||
|
getdate datestr
|
||||||
|
gettime timestr
|
||||||
|
sprintf2 cmd 'sudo date -s "%s %s"' datestr timestr
|
||||||
|
sendln cmd
|
||||||
|
|
||||||
|
;Stress log clear
|
||||||
|
wait prompt_sonic_root
|
||||||
|
sendln "rm /host/hw-eval/jobs/*"
|
||||||
|
|
||||||
|
; ========== HW Test Session ==========
|
||||||
|
; Clear session
|
||||||
|
wait prompt_sonic_root
|
||||||
|
sendln "hw-test-session finish"
|
||||||
|
wait prompt_sonic_root
|
||||||
|
sendln "bgctl reset --yes"
|
||||||
|
wait prompt_sonic_root
|
||||||
|
sendln "bgctl stop --all"
|
||||||
|
wait prompt_sonic_root
|
||||||
|
sendln "bgctl list"
|
||||||
|
|
||||||
|
wait prompt_sonic_root
|
||||||
|
sendln "hw-test-session start"
|
||||||
|
wait prompt_sonic_root
|
||||||
|
sendln "hw-test-session log"
|
||||||
|
wait prompt_sonic_root
|
||||||
|
sendln "hw-test-session status"
|
||||||
|
|
||||||
|
; ========== FAN SPEED ==========
|
||||||
|
wait prompt_sonic_root
|
||||||
|
sendln "echo 18-0020 > /sys/bus/i2c/drivers/max31790/unbind"
|
||||||
|
wait prompt_sonic_root
|
||||||
|
sendln "sleep .5"
|
||||||
|
wait prompt_sonic_root
|
||||||
|
sendln "echo 18-0020 > /sys/bus/i2c/drivers/max31790/bind"
|
||||||
|
wait prompt_sonic_root
|
||||||
|
sendln "echo 25-0020 > /sys/bus/i2c/drivers/max31790/unbind"
|
||||||
|
wait prompt_sonic_root
|
||||||
|
sendln "sleep .5"
|
||||||
|
wait prompt_sonic_root
|
||||||
|
sendln "echo 25-0020 > /sys/bus/i2c/drivers/max31790/bind"
|
||||||
|
|
||||||
|
wait prompt_sonic_root
|
||||||
|
sprintf2 fan_ctrl_cmd 'fan-speed-control.sh %d' FAN_SPEED
|
||||||
|
sendln fan_ctrl_cmd
|
||||||
|
|
||||||
|
wait "Set all configured fan channels to"
|
||||||
|
sendln "y"
|
||||||
|
|
||||||
|
; ========== Wait DUT Init ==========
|
||||||
|
include "utils/wait_init.ttl"
|
||||||
|
|
||||||
|
; ========== DUT Info ==========
|
||||||
|
wait prompt_sonic_root
|
||||||
|
sendln "show boot"
|
||||||
|
wait prompt_sonic_root
|
||||||
|
sendln "show version"
|
||||||
|
wait prompt_sonic_root
|
||||||
|
sendln "fwutil show status"
|
||||||
|
wait prompt_sonic_root
|
||||||
|
sendln "show system-memory"
|
||||||
|
wait prompt_sonic_root
|
||||||
|
sendln "show service"
|
||||||
|
wait prompt_sonic_root
|
||||||
|
sendln "show platform syseeprom"
|
||||||
|
wait prompt_sonic_root
|
||||||
|
sendln "show platform ssdhealth"
|
||||||
|
wait prompt_sonic_root
|
||||||
|
sendln "qfx5252-tpm-version"
|
||||||
|
wait prompt_sonic_root
|
||||||
|
sendln "/usr/sbin/nvme smart-log -H /dev/nvme0"
|
||||||
|
wait prompt_sonic_root
|
||||||
|
sendln "/usr/sbin/smartctl -x /dev/nvme0"
|
||||||
|
|
||||||
|
; ========== BMC version ==========
|
||||||
|
;wait prompt_sonic_root
|
||||||
|
;sendln "bmc-manager run 'cat /etc/issue'"
|
||||||
|
wait prompt_sonic_root
|
||||||
|
sendln "bmc-first-enroll"
|
||||||
|
wait prompt_sonic_root
|
||||||
|
sendln "bmc-manager version"
|
||||||
|
wait prompt_sonic_root
|
||||||
|
sendln "bmc-manager status"
|
||||||
|
|
||||||
|
; ========== CLEAR PCIE Error ==========
|
||||||
|
include "utils/show_pcie_error_reg_TH6_SWB0.ttl"
|
||||||
|
include "utils/show_pcie_error_reg_TH6_SWB1.ttl"
|
||||||
|
include "utils/show_pcie_error_reg_FPGA.ttl"
|
||||||
|
include "utils/show_pcie_error_reg_BMC.ttl"
|
||||||
|
include "utils/show_pcie_error_reg_DDR.ttl"
|
||||||
|
include "utils/show_pcie_error_reg_I210.ttl"
|
||||||
|
include "utils/show_pcie_error_reg_SSD.ttl"
|
||||||
|
|
||||||
|
wait prompt_sonic_root
|
||||||
|
sendln "/usr/sbin/ras-mc-ctl --summary"
|
||||||
|
|
||||||
|
; ========== Check PCIE tree + PCIE link status + GET PCIE bandwidth Test ==========
|
||||||
|
include "utils/pcie_bus.ttl"
|
||||||
|
|
||||||
|
; ========== TAKE DATA ==========
|
||||||
|
include "utils/setup_pmon.ttl"
|
||||||
|
include "utils/show_dmesg.ttl"
|
||||||
|
|
||||||
|
; ========== Full Load ==========
|
||||||
|
; AMD CPU STRESS TEST
|
||||||
|
wait prompt_sonic_root
|
||||||
|
sendln 'chmod +x ~/hammer/tools/amd/mlucas-avx2'
|
||||||
|
wait prompt_sonic_root
|
||||||
|
sendln "~/hammer/tools/amd/mlucas-avx2 -s l -cpu 0:15 > ~/hammer/tools/amd/mlucas_amm_log 2>&1 &"
|
||||||
|
|
||||||
|
; TR518 TEST
|
||||||
|
wait prompt_sonic_root
|
||||||
|
sendln "~/Blanton_Script/blanton_tr518.sh start"
|
||||||
|
|
||||||
|
while 1
|
||||||
|
; Base info polling
|
||||||
|
include "utils/setup_pmon.ttl"
|
||||||
|
|
||||||
|
; TH6 Power Polling
|
||||||
|
wait prompt_sonic_root
|
||||||
|
sendln "~/Blanton_Script/TH6_SWB0_power_readback.sh"
|
||||||
|
wait prompt_sonic_root
|
||||||
|
sendln "~/Blanton_Script/TH6_SWB1_power_readback.sh"
|
||||||
|
|
||||||
|
; Background jobs Check
|
||||||
|
wait prompt_sonic_root
|
||||||
|
sendln "bgctl list"
|
||||||
|
wait prompt_sonic_root
|
||||||
|
sendln "jobs"
|
||||||
|
pause 60
|
||||||
|
endwhile
|
||||||
File diff suppressed because it is too large
Load Diff
@@ -6,7 +6,7 @@
|
|||||||
# V0.1.0 2026-08-17 First version. Bash port of the three Tera Term macros
|
# V0.1.0 2026-08-17 First version. Bash port of the three Tera Term macros
|
||||||
# utils/traffic_loopback_vlan_setting.ttl (VLAN 30..137,
|
# utils/traffic_loopback_vlan_setting.ttl (VLAN 30..137,
|
||||||
# port pair cdN <-> cdN+32), utils/traffic_loopback_start.ttl
|
# port pair cdN <-> cdN+32), utils/traffic_loopback_start.ttl
|
||||||
# (tx 100 length=512 VLantag=<vid>) and
|
# (tx <count> length=<len> VLantag=<vid>) and
|
||||||
# utils/traffic_loopback_vlan_remove.ttl.
|
# utils/traffic_loopback_vlan_remove.ttl.
|
||||||
# One DUT = two switch boards -> bcmcmd unit 0 and 1
|
# One DUT = two switch boards -> bcmcmd unit 0 and 1
|
||||||
# (bcmcmd -n <unit>), default both.
|
# (bcmcmd -n <unit>), default both.
|
||||||
@@ -90,6 +90,16 @@
|
|||||||
# With only one unit selected the summary reports
|
# With only one unit selected the summary reports
|
||||||
# UNDECIDED (exit 3) instead of guessing.
|
# UNDECIDED (exit 3) instead of guessing.
|
||||||
# TL_CE_ENABLE=0 restores the old cd-pairs-only behaviour.
|
# TL_CE_ENABLE=0 restores the old cd-pairs-only behaviour.
|
||||||
|
# V0.7.0 2026-09-01 Change: tx bursts carry PatternRandom=yes and the defaults
|
||||||
|
# become tx 200 length=324 (were 100 / 512).
|
||||||
|
# Random payload keeps the bit pattern changing instead of
|
||||||
|
# repeating, which is what makes a marginal lane show up;
|
||||||
|
# a fixed pattern can sit on a benign sequence all run.
|
||||||
|
# TL_TX_RANDOM=no forces the fixed pattern, "" leaves the
|
||||||
|
# argument off entirely (pre-V0.7.0 wire format).
|
||||||
|
# NOTE: counters scale with count x length, so totals from
|
||||||
|
# before this build are not comparable - 200x324 moves
|
||||||
|
# about 27% more bytes per burst than 100x512.
|
||||||
# V0.6.0 2026-08-28 Add: ce0 traffic is now SUSTAINED, not a single burst.
|
# V0.6.0 2026-08-28 Add: ce0 traffic is now SUSTAINED, not a single burst.
|
||||||
# A cd pair keeps its packets circulating because they
|
# A cd pair keeps its packets circulating because they
|
||||||
# flood to the partner port; ce0 has no partner and a
|
# flood to the partner port; ce0 has no partner and a
|
||||||
@@ -142,6 +152,8 @@
|
|||||||
# aliases: -tx | --tx
|
# aliases: -tx | --tx
|
||||||
# -l|--length <n> tx packet length (default $TL_TX_LENGTH)
|
# -l|--length <n> tx packet length (default $TL_TX_LENGTH)
|
||||||
# aliases: -length | --len
|
# aliases: -length | --len
|
||||||
|
# -r|--random <yes|no> tx PatternRandom (default $TL_TX_RANDOM;
|
||||||
|
# empty string omits the argument)
|
||||||
# -p|--ports <list|all> ps: port list ('all' = plain 'ps', every port)
|
# -p|--ports <list|all> ps: port list ('all' = plain 'ps', every port)
|
||||||
# -T|--tolerance <n> report: allowed |delta| in packets (default 0;
|
# -T|--tolerance <n> report: allowed |delta| in packets (default 0;
|
||||||
# -T 1 absorbs the normal snapshot skew)
|
# -T 1 absorbs the normal snapshot skew)
|
||||||
@@ -161,7 +173,8 @@
|
|||||||
# -h|--help help
|
# -h|--help help
|
||||||
#
|
#
|
||||||
# Environment overrides:
|
# Environment overrides:
|
||||||
# BCMCMD_CMD=bcmcmd TL_UNITS="0 1" TL_TX_COUNT=100 TL_TX_LENGTH=512
|
# BCMCMD_CMD=bcmcmd TL_UNITS="0 1" TL_TX_COUNT=200 TL_TX_LENGTH=324
|
||||||
|
# TL_TX_RANDOM=yes
|
||||||
# TL_PS_PORTS="1-24,40-96,..." TL_TOLERANCE=0 TL_LOG_DIR=/tmp
|
# TL_PS_PORTS="1-24,40-96,..." TL_TOLERANCE=0 TL_LOG_DIR=/tmp
|
||||||
# DEBUG_MODE=1
|
# DEBUG_MODE=1
|
||||||
#
|
#
|
||||||
@@ -173,8 +186,14 @@
|
|||||||
# === Config ==================================================================
|
# === Config ==================================================================
|
||||||
BCMCMD_CMD="${BCMCMD_CMD:-bcmcmd}"
|
BCMCMD_CMD="${BCMCMD_CMD:-bcmcmd}"
|
||||||
TL_UNITS="${TL_UNITS:-0 1}" # one DUT = two switch boards (0 and 1)
|
TL_UNITS="${TL_UNITS:-0 1}" # one DUT = two switch boards (0 and 1)
|
||||||
TL_TX_COUNT="${TL_TX_COUNT:-100}"
|
TL_TX_COUNT="${TL_TX_COUNT:-200}"
|
||||||
TL_TX_LENGTH="${TL_TX_LENGTH:-512}"
|
TL_TX_LENGTH="${TL_TX_LENGTH:-324}"
|
||||||
|
|
||||||
|
# PatternRandom=yes|no is appended to every tx burst. Random payload exercises
|
||||||
|
# the SerDes with changing bit patterns instead of the repeating one a fixed
|
||||||
|
# pattern produces, which is what makes a marginal lane show up.
|
||||||
|
# Set to "" to leave the argument off entirely (pre-V0.7.0 behaviour).
|
||||||
|
TL_TX_RANDOM="${TL_TX_RANDOM:-yes}"
|
||||||
TL_DEFAULT_VLAN="${TL_DEFAULT_VLAN:-1}"
|
TL_DEFAULT_VLAN="${TL_DEFAULT_VLAN:-1}"
|
||||||
TL_DEFAULT_VLAN_PBM="${TL_DEFAULT_VLAN_PBM:-cd}"
|
TL_DEFAULT_VLAN_PBM="${TL_DEFAULT_VLAN_PBM:-cd}"
|
||||||
|
|
||||||
@@ -515,17 +534,23 @@ traffic_linespeed_start() {
|
|||||||
_tl_units_check || return 1
|
_tl_units_check || return 1
|
||||||
_tl_is_uint "$TL_TX_COUNT" || { _tl_err "tx count '$TL_TX_COUNT' is not a positive integer (-tx|-c <n>)"; return 1; }
|
_tl_is_uint "$TL_TX_COUNT" || { _tl_err "tx count '$TL_TX_COUNT' is not a positive integer (-tx|-c <n>)"; return 1; }
|
||||||
_tl_is_uint "$TL_TX_LENGTH" || { _tl_err "tx length '$TL_TX_LENGTH' is not a positive integer (-length|-l <n>)"; return 1; }
|
_tl_is_uint "$TL_TX_LENGTH" || { _tl_err "tx length '$TL_TX_LENGTH' is not a positive integer (-length|-l <n>)"; return 1; }
|
||||||
|
local rnd=""
|
||||||
|
case "$TL_TX_RANDOM" in
|
||||||
|
yes|no) rnd=" PatternRandom=$TL_TX_RANDOM" ;;
|
||||||
|
"") rnd="" ;;
|
||||||
|
*) _tl_err "PatternRandom '$TL_TX_RANDOM' must be yes, no or empty (-r|--random)"; return 1 ;;
|
||||||
|
esac
|
||||||
local unit vid pa pb n fail
|
local unit vid pa pb n fail
|
||||||
for unit in $TL_UNITS; do
|
for unit in $TL_UNITS; do
|
||||||
n=0; fail=0
|
n=0; fail=0
|
||||||
_tl_info "unit $unit: tx $TL_TX_COUNT length=$TL_TX_LENGTH per VLAN 30..137"
|
_tl_info "unit $unit: tx $TL_TX_COUNT length=$TL_TX_LENGTH${rnd} per VLAN 30..137"
|
||||||
while read -r vid pa pb <&3; do
|
while read -r vid pa pb <&3; do
|
||||||
[ -z "$vid" ] && continue
|
[ -z "$vid" ] && continue
|
||||||
_tl_bcm_q "$unit" "tx $TL_TX_COUNT length=$TL_TX_LENGTH VLantag=$vid" || fail=$((fail+1))
|
_tl_bcm_q "$unit" "tx $TL_TX_COUNT length=$TL_TX_LENGTH VLantag=$vid${rnd}" || fail=$((fail+1))
|
||||||
n=$((n+1))
|
n=$((n+1))
|
||||||
done 3<<< "$TL_PAIRS"
|
done 3<<< "$TL_PAIRS"
|
||||||
if [ "$TL_CE_ENABLE" = "1" ]; then
|
if [ "$TL_CE_ENABLE" = "1" ]; then
|
||||||
_tl_bcm_q "$unit" "tx $TL_TX_COUNT length=$TL_TX_LENGTH VLantag=$TL_CE_VLAN" || fail=$((fail+1))
|
_tl_bcm_q "$unit" "tx $TL_TX_COUNT length=$TL_TX_LENGTH VLantag=$TL_CE_VLAN${rnd}" || fail=$((fail+1))
|
||||||
n=$((n+1))
|
n=$((n+1))
|
||||||
fi
|
fi
|
||||||
if [ "$fail" -eq 0 ]; then
|
if [ "$fail" -eq 0 ]; then
|
||||||
@@ -949,7 +974,7 @@ traffic_linespeed_run() {
|
|||||||
blanton_traffic_linespeed_help() {
|
blanton_traffic_linespeed_help() {
|
||||||
echo -e "\033[1mblanton_traffic_linespeed.sh - SWB loopback line-speed traffic (bcmcmd)\033[0m"
|
echo -e "\033[1mblanton_traffic_linespeed.sh - SWB loopback line-speed traffic (bcmcmd)\033[0m"
|
||||||
echo ""
|
echo ""
|
||||||
echo -e " Units: \033[36m$TL_UNITS\033[0m tx: \033[36m$TL_TX_COUNT pkt x ${TL_TX_LENGTH}B\033[0m"
|
echo -e " Units: \033[36m$TL_UNITS\033[0m tx: \033[36m$TL_TX_COUNT pkt x ${TL_TX_LENGTH}B\033[0m PatternRandom: \033[36m${TL_TX_RANDOM:-（不加）}\033[0m"
|
||||||
echo -e " VLANs: 30..137 ($(_tl_pair_count) loopback pairs, cdN <-> cdN+32)"
|
echo -e " VLANs: 30..137 ($(_tl_pair_count) loopback pairs, cdN <-> cdN+32)"
|
||||||
[ "$TL_CE_ENABLE" = "1" ] && \
|
[ "$TL_CE_ENABLE" = "1" ] && \
|
||||||
echo -e " 100G : VLAN \033[36m$TL_CE_VLAN\033[0m port \033[36m$TL_CE_PORT\033[0m mode=\033[36m$TL_CE_MODE\033[0m (cross = unit0.$TL_CE_PORT <-> unit1.$TL_CE_PORT cabled)"
|
echo -e " 100G : VLAN \033[36m$TL_CE_VLAN\033[0m port \033[36m$TL_CE_PORT\033[0m mode=\033[36m$TL_CE_MODE\033[0m (cross = unit0.$TL_CE_PORT <-> unit1.$TL_CE_PORT cabled)"
|
||||||
@@ -958,7 +983,7 @@ blanton_traffic_linespeed_help() {
|
|||||||
echo -e " \033[33minit\033[0m step 1 vlan remove 1 pbm=cd, vlan create/add each pair"
|
echo -e " \033[33minit\033[0m step 1 vlan remove 1 pbm=cd, vlan create/add each pair"
|
||||||
echo -e " \033[33mclear\033[0m step 2 clear c"
|
echo -e " \033[33mclear\033[0m step 2 clear c"
|
||||||
echo -e " \033[33mshow\033[0m step 3/6 show c (run before and after traffic)"
|
echo -e " \033[33mshow\033[0m step 3/6 show c (run before and after traffic)"
|
||||||
echo -e " \033[33mstart\033[0m step 4 tx <count> length=<len> VLantag=<vid> per VLAN"
|
echo -e " \033[33mstart\033[0m step 4 tx <count> length=<len> VLantag=<vid> [PatternRandom=<yes|no>] per VLAN"
|
||||||
echo -e " \033[33mstop\033[0m step 5 vlan remove <vid> pbm=<pair> [--destroy also destroys]"
|
echo -e " \033[33mstop\033[0m step 5 vlan remove <vid> pbm=<pair> [--destroy also destroys]"
|
||||||
[ "$TL_CE_ENABLE" = "1" ] && [ "$TL_CE_MIRROR" = "1" ] && \
|
[ "$TL_CE_ENABLE" = "1" ] && [ "$TL_CE_MIRROR" = "1" ] && \
|
||||||
echo -e " \033[33m^ also turns the $TL_CE_PORT mirror off -- without it the 100G loop keeps running\033[0m"
|
echo -e " \033[33m^ also turns the $TL_CE_PORT mirror off -- without it the 100G loop keeps running\033[0m"
|
||||||
@@ -972,6 +997,7 @@ blanton_traffic_linespeed_help() {
|
|||||||
echo -e " \033[33m-u|--unit\033[0m <0|1|all> bcmcmd unit(s); 'all' = 0 1 (default: $TL_UNITS)"
|
echo -e " \033[33m-u|--unit\033[0m <0|1|all> bcmcmd unit(s); 'all' = 0 1 (default: $TL_UNITS)"
|
||||||
echo -e " \033[33m-c|--count|-tx\033[0m <n> tx packet count (default $TL_TX_COUNT)"
|
echo -e " \033[33m-c|--count|-tx\033[0m <n> tx packet count (default $TL_TX_COUNT)"
|
||||||
echo -e " \033[33m-l|--length|-length\033[0m <n> tx packet length (default $TL_TX_LENGTH)"
|
echo -e " \033[33m-l|--length|-length\033[0m <n> tx packet length (default $TL_TX_LENGTH)"
|
||||||
|
echo -e " \033[33m-r|--random\033[0m <yes|no> tx PatternRandom (default $TL_TX_RANDOM; \"\" 完全不加)"
|
||||||
echo -e " \033[33m-p|--ports\033[0m <list> ps port list, or 'all' for every port"
|
echo -e " \033[33m-p|--ports\033[0m <list> ps port list, or 'all' for every port"
|
||||||
echo -e " \033[33m-T|--tolerance\033[0m <n> report: allowed |delta| pkts (default $TL_TOLERANCE; -T 1 = snapshot skew)"
|
echo -e " \033[33m-T|--tolerance\033[0m <n> report: allowed |delta| pkts (default $TL_TOLERANCE; -T 1 = snapshot skew)"
|
||||||
echo -e " \033[33m-a|--all\033[0m report: kept for compatibility (all pairs are listed)"
|
echo -e " \033[33m-a|--all\033[0m report: kept for compatibility (all pairs are listed)"
|
||||||
@@ -995,7 +1021,8 @@ blanton_traffic_linespeed_help() {
|
|||||||
echo -e " blanton_traffic_linespeed report -u 1 -q | grep -v PASS"
|
echo -e " blanton_traffic_linespeed report -u 1 -q | grep -v PASS"
|
||||||
echo -e " blanton_traffic_linespeed report -f /tmp/showc_unit1_*.log -a"
|
echo -e " blanton_traffic_linespeed report -f /tmp/showc_unit1_*.log -a"
|
||||||
echo -e " blanton_traffic_linespeed show -u 1 | grep -iE 'error|discard|drop'"
|
echo -e " blanton_traffic_linespeed show -u 1 | grep -iE 'error|discard|drop'"
|
||||||
echo -e " blanton_traffic_linespeed start -u 0 -tx 100 -length 512"
|
echo -e " blanton_traffic_linespeed start -u 0 -tx 200 -length 324"
|
||||||
|
echo -e " blanton_traffic_linespeed start -r no # 固定樣式，不隨機"
|
||||||
echo -e " blanton_traffic_linespeed start -tx 100000 -length 9216 -d"
|
echo -e " blanton_traffic_linespeed start -tx 100000 -length 9216 -d"
|
||||||
echo -e " blanton_traffic_linespeed stop --destroy"
|
echo -e " blanton_traffic_linespeed stop --destroy"
|
||||||
echo ""
|
echo ""
|
||||||
@@ -1019,6 +1046,7 @@ blanton_traffic_linespeed() {
|
|||||||
shift 2 ;;
|
shift 2 ;;
|
||||||
-c|--count|-tx|--tx) TL_TX_COUNT="$2"; shift 2 ;;
|
-c|--count|-tx|--tx) TL_TX_COUNT="$2"; shift 2 ;;
|
||||||
-l|-length|--length|--len) TL_TX_LENGTH="$2"; shift 2 ;;
|
-l|-length|--length|--len) TL_TX_LENGTH="$2"; shift 2 ;;
|
||||||
|
-r|--random|-PatternRandom|--pattern-random) TL_TX_RANDOM="$2"; shift 2 ;;
|
||||||
-p|--ports) TL_PS_PORTS="$2"; shift 2 ;;
|
-p|--ports) TL_PS_PORTS="$2"; shift 2 ;;
|
||||||
-T|--tolerance) TL_TOLERANCE="$2"; shift 2 ;;
|
-T|--tolerance) TL_TOLERANCE="$2"; shift 2 ;;
|
||||||
-f|--file) TL_REPORT_FILE="$2"; shift 2 ;;
|
-f|--file) TL_REPORT_FILE="$2"; shift 2 ;;
|
||||||
|
|||||||
@@ -0,0 +1,40 @@
|
|||||||
|
SWB0_0V9_ANLG0
|
||||||
|
SWB0_0V9_ANLG1
|
||||||
|
SWB0_0V75_ANLG0
|
||||||
|
SWB0_0V75_ANLG1
|
||||||
|
SWB0_PHYTILE_P0
|
||||||
|
SWB0_PHYTILE_P1
|
||||||
|
SWB0_PHYTILE_P2
|
||||||
|
SWB0_PHYTILE_P3
|
||||||
|
SWB0_PHYTILE_P4
|
||||||
|
SWB0_PHYTILE_P5
|
||||||
|
SWB0_PHYTILE_P6
|
||||||
|
SWB0_PHYTILE_P7
|
||||||
|
SWB0_PVDD1V5_CNDR0
|
||||||
|
SWB0_PVDD1V5_CNDR1
|
||||||
|
SWB0_PVDDA_PHYT0
|
||||||
|
SWB0_PVDDA_PHYT1
|
||||||
|
SWB0_PVDDA_PHYT2
|
||||||
|
SWB0_PVDDA_PHYT3
|
||||||
|
SWB0_TH6_CORE
|
||||||
|
|
||||||
|
|
||||||
|
SWB1_0V9_ANLG0
|
||||||
|
SWB1_0V9_ANLG1
|
||||||
|
SWB1_0V75_ANLG0
|
||||||
|
SWB1_0V75_ANLG1
|
||||||
|
SWB1_PHYTILE_P0
|
||||||
|
SWB1_PHYTILE_P1
|
||||||
|
SWB1_PHYTILE_P2
|
||||||
|
SWB1_PHYTILE_P3
|
||||||
|
SWB1_PHYTILE_P4
|
||||||
|
SWB1_PHYTILE_P5
|
||||||
|
SWB1_PHYTILE_P6
|
||||||
|
SWB1_PHYTILE_P7
|
||||||
|
SWB1_PVDD1V5_CNDR0
|
||||||
|
SWB1_PVDD1V5_CNDR1
|
||||||
|
SWB1_PVDDA_PHYT0
|
||||||
|
SWB1_PVDDA_PHYT1
|
||||||
|
SWB1_PVDDA_PHYT2
|
||||||
|
SWB1_PVDDA_PHYT3
|
||||||
|
SWB1_TH6_CORE
|
||||||
@@ -0,0 +1,48 @@
|
|||||||
|
i2cset -f -y 13 0x25 0x00 0
|
||||||
|
i2cset -f -y 13 0x25 0x15
|
||||||
|
i2cset -f -y 15 0x26 0x00 0
|
||||||
|
i2cset -f -y 15 0x26 0x15
|
||||||
|
i2cset -f -y 13 0x25 0x00 0
|
||||||
|
i2cset -f -y 13 0x25 0x15
|
||||||
|
i2cset -f -y 15 0x26 0x00 0
|
||||||
|
i2cset -f -y 15 0x26 0x15
|
||||||
|
i2cset -f -y 13 0x21 0x00 0
|
||||||
|
i2cset -f -y 13 0x21 0x15
|
||||||
|
i2cset -f -y 13 0x22 0x00 0
|
||||||
|
i2cset -f -y 13 0x22 0x15
|
||||||
|
i2cset -f -y 15 0x23 0x00 0
|
||||||
|
i2cset -f -y 15 0x23 0x15
|
||||||
|
i2cset -f -y 15 0x24 0x00 0
|
||||||
|
i2cset -f -y 15 0x24 0x15
|
||||||
|
i2cset -f -y 13 0x29 0x00 0
|
||||||
|
i2cset -f -y 13 0x29 0x15
|
||||||
|
i2cset -f -y 13 0x27 0x00 0
|
||||||
|
i2cset -f -y 13 0x27 0x15
|
||||||
|
i2cset -f -y 15 0x28 0x00 0
|
||||||
|
i2cset -f -y 15 0x28 0x15
|
||||||
|
i2cset -f -y 13 0x20 0x00 0
|
||||||
|
i2cset -f -y 13 0x20 0x17
|
||||||
|
i2cset -f -y 14 0x25 0x00 0
|
||||||
|
i2cset -f -y 14 0x25 0x15
|
||||||
|
i2cset -f -y 16 0x26 0x00 0
|
||||||
|
i2cset -f -y 16 0x26 0x15
|
||||||
|
i2cset -f -y 14 0x25 0x00 0
|
||||||
|
i2cset -f -y 14 0x25 0x15
|
||||||
|
i2cset -f -y 16 0x26 0x00 0
|
||||||
|
i2cset -f -y 16 0x26 0x15
|
||||||
|
i2cset -f -y 14 0x21 0x00 0
|
||||||
|
i2cset -f -y 14 0x21 0x15
|
||||||
|
i2cset -f -y 14 0x22 0x00 0
|
||||||
|
i2cset -f -y 14 0x22 0x15
|
||||||
|
i2cset -f -y 16 0x23 0x00 0
|
||||||
|
i2cset -f -y 16 0x23 0x15
|
||||||
|
i2cset -f -y 16 0x24 0x00 0
|
||||||
|
i2cset -f -y 16 0x24 0x15
|
||||||
|
i2cset -f -y 14 0x29 0x00 0
|
||||||
|
i2cset -f -y 14 0x29 0x15
|
||||||
|
i2cset -f -y 14 0x27 0x00 0
|
||||||
|
i2cset -f -y 14 0x27 0x15
|
||||||
|
i2cset -f -y 16 0x28 0x00 0
|
||||||
|
i2cset -f -y 16 0x28 0x15
|
||||||
|
i2cset -f -y 14 0x20 0x00 0
|
||||||
|
i2cset -f -y 14 0x20 0x17
|
||||||
@@ -0,0 +1,188 @@
|
|||||||
|
//0.930V
|
||||||
|
i2cset -f -y 13 0x25 0x00 0
|
||||||
|
i2ctransfer -f -y 13 w3@0x25 0x21 0x89 0x00
|
||||||
|
i2cset -f -y 13 0x25 0x00 2
|
||||||
|
i2ctransfer -f -y 13 w3@0x25 0x0D 0x34 0x11
|
||||||
|
//0.930V
|
||||||
|
i2cset -f -y 15 0x26 0x00 0
|
||||||
|
i2ctransfer -f -y 15 w3@0x26 0x21 0x89 0x00
|
||||||
|
i2cset -f -y 15 0x26 0x00 2
|
||||||
|
i2ctransfer -f -y 15 w3@0x26 0x0D 0x34 0x11
|
||||||
|
//0.725V
|
||||||
|
i2cset -f -y 13 0x25 0x00 1
|
||||||
|
i2ctransfer -f -y 13 w3@0x25 0x21 0x60 0x00
|
||||||
|
i2cset -f -y 13 0x25 0x00 2
|
||||||
|
i2ctransfer -f -y 13 w3@0x25 0x1D 0x0A 0x06
|
||||||
|
//0.725V
|
||||||
|
i2cset -f -y 15 0x26 0x00 1
|
||||||
|
i2ctransfer -f -y 15 w3@0x26 0x21 0x60 0x00
|
||||||
|
i2cset -f -y 15 0x26 0x00 2
|
||||||
|
i2ctransfer -f -y 15 w3@0x26 0x1D 0x0A 0x06
|
||||||
|
//0.725V
|
||||||
|
i2cset -f -y 13 0x21 0x00 0
|
||||||
|
i2ctransfer -f -y 13 w3@0x21 0x21 0x60 0x00
|
||||||
|
i2cset -f -y 13 0x21 0x00 2
|
||||||
|
i2ctransfer -f -y 13 w3@0x21 0x0D 0x12 0x0C
|
||||||
|
//0.725V
|
||||||
|
i2cset -f -y 13 0x21 0x00 1
|
||||||
|
i2ctransfer -f -y 13 w3@0x21 0x21 0x60 0x00
|
||||||
|
i2cset -f -y 13 0x21 0x00 2
|
||||||
|
i2ctransfer -f -y 13 w3@0x21 0x1D 0x0A 0x06
|
||||||
|
//0.725V
|
||||||
|
i2cset -f -y 13 0x22 0x00 0
|
||||||
|
i2ctransfer -f -y 13 w3@0x22 0x21 0x60 0x00
|
||||||
|
i2cset -f -y 13 0x22 0x00 2
|
||||||
|
i2ctransfer -f -y 13 w3@0x22 0x0D 0x12 0x0C
|
||||||
|
//0.725V
|
||||||
|
i2cset -f -y 13 0x22 0x00 1
|
||||||
|
i2ctransfer -f -y 13 w3@0x22 0x21 0x60 0x00
|
||||||
|
i2cset -f -y 13 0x22 0x00 2
|
||||||
|
i2ctransfer -f -y 13 w3@0x22 0x1D 0x0A 0x06
|
||||||
|
//0.725V
|
||||||
|
i2cset -f -y 15 0x23 0x00 0
|
||||||
|
i2ctransfer -f -y 15 w3@0x23 0x21 0x60 0x00
|
||||||
|
i2cset -f -y 15 0x23 0x00 2
|
||||||
|
i2ctransfer -f -y 15 w3@0x23 0x0D 0x12 0x0C
|
||||||
|
//0.725V
|
||||||
|
i2cset -f -y 15 0x23 0x00 1
|
||||||
|
i2ctransfer -f -y 15 w3@0x23 0x21 0x60 0x00
|
||||||
|
i2cset -f -y 15 0x23 0x00 2
|
||||||
|
i2ctransfer -f -y 15 w3@0x23 0x1D 0x0A 0x06
|
||||||
|
//0.725V
|
||||||
|
i2cset -f -y 15 0x24 0x00 0
|
||||||
|
i2ctransfer -f -y 15 w3@0x24 0x21 0x60 0x00
|
||||||
|
i2cset -f -y 15 0x24 0x00 2
|
||||||
|
i2ctransfer -f -y 15 w3@0x24 0x0D 0x12 0x0C
|
||||||
|
//0.725V
|
||||||
|
i2cset -f -y 15 0x24 0x00 1
|
||||||
|
i2ctransfer -f -y 15 w3@0x24 0x21 0x60 0x00
|
||||||
|
i2cset -f -y 15 0x24 0x00 2
|
||||||
|
i2ctransfer -f -y 15 w3@0x24 0x1D 0x0A 0x06
|
||||||
|
//1.545V
|
||||||
|
i2cset -f -y 13 0x29 0x00 0
|
||||||
|
i2ctransfer -f -y 13 w3@0x29 0x21 0x04 0x01
|
||||||
|
i2cset -f -y 13 0x29 0x00 2
|
||||||
|
i2ctransfer -f -y 13 w3@0x29 0x0D 0x91 0x20
|
||||||
|
//1.545V
|
||||||
|
i2cset -f -y 13 0x29 0x00 1
|
||||||
|
i2ctransfer -f -y 13 w3@0x29 0x21 0x04 0x01
|
||||||
|
i2cset -f -y 13 0x29 0x00 2
|
||||||
|
i2ctransfer -f -y 13 w3@0x29 0x1D 0x49 0x10
|
||||||
|
//0.745V
|
||||||
|
i2cset -f -y 13 0x27 0x00 0
|
||||||
|
i2ctransfer -f -y 13 w3@0x27 0x21 0x64 0x00
|
||||||
|
i2cset -f -y 13 0x27 0x00 2
|
||||||
|
i2ctransfer -f -y 13 w3@0x27 0x0D 0x94 0x0C
|
||||||
|
//0.745V
|
||||||
|
i2cset -f -y 13 0x27 0x00 1
|
||||||
|
i2ctransfer -f -y 13 w3@0x27 0x21 0x64 0x00
|
||||||
|
i2cset -f -y 13 0x27 0x00 2
|
||||||
|
i2ctransfer -f -y 13 w3@0x27 0x1D 0x4C 0x06
|
||||||
|
//0.745V
|
||||||
|
i2cset -f -y 15 0x28 0x00 0
|
||||||
|
i2ctransfer -f -y 15 w3@0x28 0x21 0x64 0x00
|
||||||
|
i2cset -f -y 15 0x28 0x00 2
|
||||||
|
i2ctransfer -f -y 15 w3@0x28 0x0D 0x94 0x0C
|
||||||
|
//0.745V
|
||||||
|
i2cset -f -y 15 0x28 0x00 1
|
||||||
|
i2ctransfer -f -y 15 w3@0x28 0x21 0x64 0x00
|
||||||
|
i2cset -f -y 15 0x28 0x00 2
|
||||||
|
i2ctransfer -f -y 15 w3@0x28 0x1D 0x4C 0x06
|
||||||
|
//0.885V
|
||||||
|
i2cset -f -y 13 0x20 0x00 0
|
||||||
|
i2ctransfer -f -y 13 w3@0x20 0x21 0x62 0x01
|
||||||
|
|
||||||
|
|
||||||
|
//0.930V
|
||||||
|
i2cset -f -y 14 0x25 0x00 0
|
||||||
|
i2ctransfer -f -y 14 w3@0x25 0x21 0x89 0x00
|
||||||
|
i2cset -f -y 14 0x25 0x00 2
|
||||||
|
i2ctransfer -f -y 14 w3@0x25 0x0D 0x34 0x11
|
||||||
|
//0.930V
|
||||||
|
i2cset -f -y 16 0x26 0x00 0
|
||||||
|
i2ctransfer -f -y 16 w3@0x26 0x21 0x89 0x00
|
||||||
|
i2cset -f -y 16 0x26 0x00 2
|
||||||
|
i2ctransfer -f -y 16 w3@0x26 0x0D 0x34 0x11
|
||||||
|
//0.725V
|
||||||
|
i2cset -f -y 14 0x25 0x00 1
|
||||||
|
i2ctransfer -f -y 14 w3@0x25 0x21 0x60 0x00
|
||||||
|
i2cset -f -y 14 0x25 0x00 2
|
||||||
|
i2ctransfer -f -y 14 w3@0x25 0x1D 0x0A 0x06
|
||||||
|
//0.725V
|
||||||
|
i2cset -f -y 16 0x26 0x00 1
|
||||||
|
i2ctransfer -f -y 16 w3@0x26 0x21 0x60 0x00
|
||||||
|
i2cset -f -y 16 0x26 0x00 2
|
||||||
|
i2ctransfer -f -y 16 w3@0x26 0x1D 0x0A 0x06
|
||||||
|
//0.725V
|
||||||
|
i2cset -f -y 14 0x21 0x00 0
|
||||||
|
i2ctransfer -f -y 14 w3@0x21 0x21 0x60 0x00
|
||||||
|
i2cset -f -y 14 0x21 0x00 2
|
||||||
|
i2ctransfer -f -y 14 w3@0x21 0x0D 0x12 0x0C
|
||||||
|
//0.725V
|
||||||
|
i2cset -f -y 14 0x21 0x00 1
|
||||||
|
i2ctransfer -f -y 14 w3@0x21 0x21 0x60 0x00
|
||||||
|
i2cset -f -y 14 0x21 0x00 2
|
||||||
|
i2ctransfer -f -y 14 w3@0x21 0x1D 0x0A 0x06
|
||||||
|
//0.725V
|
||||||
|
i2cset -f -y 14 0x22 0x00 0
|
||||||
|
i2ctransfer -f -y 14 w3@0x22 0x21 0x60 0x00
|
||||||
|
i2cset -f -y 14 0x22 0x00 2
|
||||||
|
i2ctransfer -f -y 14 w3@0x22 0x0D 0x12 0x0C
|
||||||
|
//0.725V
|
||||||
|
i2cset -f -y 14 0x22 0x00 1
|
||||||
|
i2ctransfer -f -y 14 w3@0x22 0x21 0x60 0x00
|
||||||
|
i2cset -f -y 14 0x22 0x00 2
|
||||||
|
i2ctransfer -f -y 14 w3@0x22 0x1D 0x0A 0x06
|
||||||
|
//0.725V
|
||||||
|
i2cset -f -y 16 0x23 0x00 0
|
||||||
|
i2ctransfer -f -y 16 w3@0x23 0x21 0x60 0x00
|
||||||
|
i2cset -f -y 16 0x23 0x00 2
|
||||||
|
i2ctransfer -f -y 16 w3@0x23 0x0D 0x12 0x0C
|
||||||
|
//0.725V
|
||||||
|
i2cset -f -y 16 0x23 0x00 1
|
||||||
|
i2ctransfer -f -y 16 w3@0x23 0x21 0x60 0x00
|
||||||
|
i2cset -f -y 16 0x23 0x00 2
|
||||||
|
i2ctransfer -f -y 16 w3@0x23 0x1D 0x0A 0x06
|
||||||
|
//0.725V
|
||||||
|
i2cset -f -y 16 0x24 0x00 0
|
||||||
|
i2ctransfer -f -y 16 w3@0x24 0x21 0x60 0x00
|
||||||
|
i2cset -f -y 16 0x24 0x00 2
|
||||||
|
i2ctransfer -f -y 16 w3@0x24 0x0D 0x12 0x0C
|
||||||
|
//0.725V
|
||||||
|
i2cset -f -y 16 0x24 0x00 1
|
||||||
|
i2ctransfer -f -y 16 w3@0x24 0x21 0x60 0x00
|
||||||
|
i2cset -f -y 16 0x24 0x00 2
|
||||||
|
i2ctransfer -f -y 16 w3@0x24 0x1D 0x0A 0x06
|
||||||
|
//1.545V
|
||||||
|
i2cset -f -y 14 0x29 0x00 0
|
||||||
|
i2ctransfer -f -y 14 w3@0x29 0x21 0x04 0x01
|
||||||
|
i2cset -f -y 14 0x29 0x00 2
|
||||||
|
i2ctransfer -f -y 14 w3@0x29 0x0D 0x91 0x20
|
||||||
|
//1.545V
|
||||||
|
i2cset -f -y 14 0x29 0x00 1
|
||||||
|
i2ctransfer -f -y 14 w3@0x29 0x21 0x04 0x01
|
||||||
|
i2cset -f -y 14 0x29 0x00 2
|
||||||
|
i2ctransfer -f -y 14 w3@0x29 0x1D 0x49 0x10
|
||||||
|
//0.745V
|
||||||
|
i2cset -f -y 14 0x27 0x00 0
|
||||||
|
i2ctransfer -f -y 14 w3@0x27 0x21 0x64 0x00
|
||||||
|
i2cset -f -y 14 0x27 0x00 2
|
||||||
|
i2ctransfer -f -y 14 w3@0x27 0x0D 0x94 0x0C
|
||||||
|
//0.745V
|
||||||
|
i2cset -f -y 14 0x27 0x00 1
|
||||||
|
i2ctransfer -f -y 14 w3@0x27 0x21 0x64 0x00
|
||||||
|
i2cset -f -y 14 0x27 0x00 2
|
||||||
|
i2ctransfer -f -y 14 w3@0x27 0x1D 0x4C 0x06
|
||||||
|
//0.745V
|
||||||
|
i2cset -f -y 16 0x28 0x00 0
|
||||||
|
i2ctransfer -f -y 16 w3@0x28 0x21 0x64 0x00
|
||||||
|
i2cset -f -y 16 0x28 0x00 2
|
||||||
|
i2ctransfer -f -y 16 w3@0x28 0x0D 0x94 0x0C
|
||||||
|
//0.745V
|
||||||
|
i2cset -f -y 16 0x28 0x00 1
|
||||||
|
i2ctransfer -f -y 16 w3@0x28 0x21 0x64 0x00
|
||||||
|
i2cset -f -y 16 0x28 0x00 2
|
||||||
|
i2ctransfer -f -y 16 w3@0x28 0x1D 0x4C 0x06
|
||||||
|
//0.885V
|
||||||
|
i2cset -f -y 14 0x20 0x00 0
|
||||||
|
i2ctransfer -f -y 14 w3@0x20 0x21 0x62 0x01
|
||||||
@@ -0,0 +1,188 @@
|
|||||||
|
//0.870V
|
||||||
|
i2cset -f -y 13 0x25 0x00 0
|
||||||
|
i2ctransfer -f -y 13 w3@0x25 0x21 0x7D 0x00
|
||||||
|
i2cset -f -y 13 0x25 0x00 2
|
||||||
|
i2ctransfer -f -y 13 w3@0x25 0x0D 0xB4 0x0F
|
||||||
|
//0.870V
|
||||||
|
i2cset -f -y 15 0x26 0x00 0
|
||||||
|
i2ctransfer -f -y 15 w3@0x26 0x21 0x7D 0x00
|
||||||
|
i2cset -f -y 15 0x26 0x00 2
|
||||||
|
i2ctransfer -f -y 15 w3@0x26 0x0D 0xB4 0x0F
|
||||||
|
//0.775V
|
||||||
|
i2cset -f -y 13 0x25 0x00 1
|
||||||
|
i2ctransfer -f -y 13 w3@0x25 0x21 0x6A 0x00
|
||||||
|
i2cset -f -y 13 0x25 0x00 2
|
||||||
|
i2ctransfer -f -y 13 w3@0x25 0x1D 0xAA 0x06
|
||||||
|
//0.775V
|
||||||
|
i2cset -f -y 15 0x26 0x00 1
|
||||||
|
i2ctransfer -f -y 15 w3@0x26 0x21 0x6A 0x00
|
||||||
|
i2cset -f -y 15 0x26 0x00 2
|
||||||
|
i2ctransfer -f -y 15 w3@0x26 0x1D 0xAA 0x06
|
||||||
|
//0.775V
|
||||||
|
i2cset -f -y 13 0x21 0x00 0
|
||||||
|
i2ctransfer -f -y 13 w3@0x21 0x21 0x6A 0x00
|
||||||
|
i2cset -f -y 13 0x21 0x00 2
|
||||||
|
i2ctransfer -f -y 13 w3@0x21 0x0D 0x52 0x0D
|
||||||
|
//0.775V
|
||||||
|
i2cset -f -y 13 0x21 0x00 1
|
||||||
|
i2ctransfer -f -y 13 w3@0x21 0x21 0x6A 0x00
|
||||||
|
i2cset -f -y 13 0x21 0x00 2
|
||||||
|
i2ctransfer -f -y 13 w3@0x21 0x1D 0xAA 0x06
|
||||||
|
//0.775V
|
||||||
|
i2cset -f -y 13 0x22 0x00 0
|
||||||
|
i2ctransfer -f -y 13 w3@0x22 0x21 0x6A 0x00
|
||||||
|
i2cset -f -y 13 0x22 0x00 2
|
||||||
|
i2ctransfer -f -y 13 w3@0x22 0x0D 0x52 0x0D
|
||||||
|
//0.775V
|
||||||
|
i2cset -f -y 13 0x22 0x00 1
|
||||||
|
i2ctransfer -f -y 13 w3@0x22 0x21 0x6A 0x00
|
||||||
|
i2cset -f -y 13 0x22 0x00 2
|
||||||
|
i2ctransfer -f -y 13 w3@0x22 0x1D 0xAA 0x06
|
||||||
|
//0.775V
|
||||||
|
i2cset -f -y 15 0x23 0x00 0
|
||||||
|
i2ctransfer -f -y 15 w3@0x23 0x21 0x6A 0x00
|
||||||
|
i2cset -f -y 15 0x23 0x00 2
|
||||||
|
i2ctransfer -f -y 15 w3@0x23 0x0D 0x52 0x0D
|
||||||
|
//0.775V
|
||||||
|
i2cset -f -y 15 0x23 0x00 1
|
||||||
|
i2ctransfer -f -y 15 w3@0x23 0x21 0x6A 0x00
|
||||||
|
i2cset -f -y 15 0x23 0x00 2
|
||||||
|
i2ctransfer -f -y 15 w3@0x23 0x1D 0xAA 0x06
|
||||||
|
//0.775V
|
||||||
|
i2cset -f -y 15 0x24 0x00 0
|
||||||
|
i2ctransfer -f -y 15 w3@0x24 0x21 0x6A 0x00
|
||||||
|
i2cset -f -y 15 0x24 0x00 2
|
||||||
|
i2ctransfer -f -y 15 w3@0x24 0x0D 0x52 0x0D
|
||||||
|
//0.775V
|
||||||
|
i2cset -f -y 15 0x24 0x00 1
|
||||||
|
i2ctransfer -f -y 15 w3@0x24 0x21 0x6A 0x00
|
||||||
|
i2cset -f -y 15 0x24 0x00 2
|
||||||
|
i2ctransfer -f -y 15 w3@0x24 0x1D 0xAA 0x06
|
||||||
|
//1.455V
|
||||||
|
i2cset -f -y 13 0x29 0x00 0
|
||||||
|
i2ctransfer -f -y 13 w3@0x29 0x21 0xF2 0x00
|
||||||
|
i2cset -f -y 13 0x29 0x00 2
|
||||||
|
i2ctransfer -f -y 13 w3@0x29 0x0D 0x51 0x1E
|
||||||
|
//1.455V
|
||||||
|
i2cset -f -y 13 0x29 0x00 1
|
||||||
|
i2ctransfer -f -y 13 w3@0x29 0x21 0xF2 0x00
|
||||||
|
i2cset -f -y 13 0x29 0x00 2
|
||||||
|
i2ctransfer -f -y 13 w3@0x29 0x1D 0x29 0x0F
|
||||||
|
//0.695V
|
||||||
|
i2cset -f -y 13 0x27 0x00 0
|
||||||
|
i2ctransfer -f -y 13 w3@0x27 0x21 0x5A 0x00
|
||||||
|
i2cset -f -y 13 0x27 0x00 2
|
||||||
|
i2ctransfer -f -y 13 w3@0x27 0x0D 0x54 0x0B
|
||||||
|
//0.695V
|
||||||
|
i2cset -f -y 13 0x27 0x00 1
|
||||||
|
i2ctransfer -f -y 13 w3@0x27 0x21 0x5A 0x00
|
||||||
|
i2cset -f -y 13 0x27 0x00 2
|
||||||
|
i2ctransfer -f -y 13 w3@0x27 0x1D 0xAC 0x05
|
||||||
|
//0.695V
|
||||||
|
i2cset -f -y 15 0x28 0x00 0
|
||||||
|
i2ctransfer -f -y 15 w3@0x28 0x21 0x5A 0x00
|
||||||
|
i2cset -f -y 15 0x28 0x00 2
|
||||||
|
i2ctransfer -f -y 15 w3@0x28 0x0D 0x54 0x0B
|
||||||
|
//0.695V
|
||||||
|
i2cset -f -y 15 0x28 0x00 1
|
||||||
|
i2ctransfer -f -y 15 w3@0x28 0x21 0x5A 0x00
|
||||||
|
i2cset -f -y 15 0x28 0x00 2
|
||||||
|
i2ctransfer -f -y 15 w3@0x28 0x1D 0xAC 0x05
|
||||||
|
//0.753V
|
||||||
|
i2cset -f -y 13 0x20 0x00 0
|
||||||
|
i2ctransfer -f -y 13 w3@0x20 0x21 0x2D 0x01
|
||||||
|
|
||||||
|
|
||||||
|
//0.870V
|
||||||
|
i2cset -f -y 14 0x25 0x00 0
|
||||||
|
i2ctransfer -f -y 14 w3@0x25 0x21 0x7D 0x00
|
||||||
|
i2cset -f -y 14 0x25 0x00 2
|
||||||
|
i2ctransfer -f -y 14 w3@0x25 0x0D 0xB4 0x0F
|
||||||
|
//0.870V
|
||||||
|
i2cset -f -y 16 0x26 0x00 0
|
||||||
|
i2ctransfer -f -y 16 w3@0x26 0x21 0x7D 0x00
|
||||||
|
i2cset -f -y 16 0x26 0x00 2
|
||||||
|
i2ctransfer -f -y 16 w3@0x26 0x0D 0xB4 0x0F
|
||||||
|
//0.775V
|
||||||
|
i2cset -f -y 14 0x25 0x00 1
|
||||||
|
i2ctransfer -f -y 14 w3@0x25 0x21 0x6A 0x00
|
||||||
|
i2cset -f -y 14 0x25 0x00 2
|
||||||
|
i2ctransfer -f -y 14 w3@0x25 0x1D 0xAA 0x06
|
||||||
|
//0.775V
|
||||||
|
i2cset -f -y 16 0x26 0x00 1
|
||||||
|
i2ctransfer -f -y 16 w3@0x26 0x21 0x6A 0x00
|
||||||
|
i2cset -f -y 16 0x26 0x00 2
|
||||||
|
i2ctransfer -f -y 16 w3@0x26 0x1D 0xAA 0x06
|
||||||
|
//0.775V
|
||||||
|
i2cset -f -y 14 0x21 0x00 0
|
||||||
|
i2ctransfer -f -y 14 w3@0x21 0x21 0x6A 0x00
|
||||||
|
i2cset -f -y 14 0x21 0x00 2
|
||||||
|
i2ctransfer -f -y 14 w3@0x21 0x0D 0x52 0x0D
|
||||||
|
//0.775V
|
||||||
|
i2cset -f -y 14 0x21 0x00 1
|
||||||
|
i2ctransfer -f -y 14 w3@0x21 0x21 0x6A 0x00
|
||||||
|
i2cset -f -y 14 0x21 0x00 2
|
||||||
|
i2ctransfer -f -y 14 w3@0x21 0x1D 0xAA 0x06
|
||||||
|
//0.775V
|
||||||
|
i2cset -f -y 14 0x22 0x00 0
|
||||||
|
i2ctransfer -f -y 14 w3@0x22 0x21 0x6A 0x00
|
||||||
|
i2cset -f -y 14 0x22 0x00 2
|
||||||
|
i2ctransfer -f -y 14 w3@0x22 0x0D 0x52 0x0D
|
||||||
|
//0.775V
|
||||||
|
i2cset -f -y 14 0x22 0x00 1
|
||||||
|
i2ctransfer -f -y 14 w3@0x22 0x21 0x6A 0x00
|
||||||
|
i2cset -f -y 14 0x22 0x00 2
|
||||||
|
i2ctransfer -f -y 14 w3@0x22 0x1D 0xAA 0x06
|
||||||
|
//0.775V
|
||||||
|
i2cset -f -y 16 0x23 0x00 0
|
||||||
|
i2ctransfer -f -y 16 w3@0x23 0x21 0x6A 0x00
|
||||||
|
i2cset -f -y 16 0x23 0x00 2
|
||||||
|
i2ctransfer -f -y 16 w3@0x23 0x0D 0x52 0x0D
|
||||||
|
//0.775V
|
||||||
|
i2cset -f -y 16 0x23 0x00 1
|
||||||
|
i2ctransfer -f -y 16 w3@0x23 0x21 0x6A 0x00
|
||||||
|
i2cset -f -y 16 0x23 0x00 2
|
||||||
|
i2ctransfer -f -y 16 w3@0x23 0x1D 0xAA 0x06
|
||||||
|
//0.775V
|
||||||
|
i2cset -f -y 16 0x24 0x00 0
|
||||||
|
i2ctransfer -f -y 16 w3@0x24 0x21 0x6A 0x00
|
||||||
|
i2cset -f -y 16 0x24 0x00 2
|
||||||
|
i2ctransfer -f -y 16 w3@0x24 0x0D 0x52 0x0D
|
||||||
|
//0.775V
|
||||||
|
i2cset -f -y 16 0x24 0x00 1
|
||||||
|
i2ctransfer -f -y 16 w3@0x24 0x21 0x6A 0x00
|
||||||
|
i2cset -f -y 16 0x24 0x00 2
|
||||||
|
i2ctransfer -f -y 16 w3@0x24 0x1D 0xAA 0x06
|
||||||
|
//1.455V
|
||||||
|
i2cset -f -y 14 0x29 0x00 0
|
||||||
|
i2ctransfer -f -y 14 w3@0x29 0x21 0xF2 0x00
|
||||||
|
i2cset -f -y 14 0x29 0x00 2
|
||||||
|
i2ctransfer -f -y 14 w3@0x29 0x0D 0x51 0x1E
|
||||||
|
//1.455V
|
||||||
|
i2cset -f -y 14 0x29 0x00 1
|
||||||
|
i2ctransfer -f -y 14 w3@0x29 0x21 0xF2 0x00
|
||||||
|
i2cset -f -y 14 0x29 0x00 2
|
||||||
|
i2ctransfer -f -y 14 w3@0x29 0x1D 0x29 0x0F
|
||||||
|
//0.695V
|
||||||
|
i2cset -f -y 14 0x27 0x00 0
|
||||||
|
i2ctransfer -f -y 14 w3@0x27 0x21 0x5A 0x00
|
||||||
|
i2cset -f -y 14 0x27 0x00 2
|
||||||
|
i2ctransfer -f -y 14 w3@0x27 0x0D 0x54 0x0B
|
||||||
|
//0.695V
|
||||||
|
i2cset -f -y 14 0x27 0x00 1
|
||||||
|
i2ctransfer -f -y 14 w3@0x27 0x21 0x5A 0x00
|
||||||
|
i2cset -f -y 14 0x27 0x00 2
|
||||||
|
i2ctransfer -f -y 14 w3@0x27 0x1D 0xAC 0x05
|
||||||
|
//0.695V
|
||||||
|
i2cset -f -y 16 0x28 0x00 0
|
||||||
|
i2ctransfer -f -y 16 w3@0x28 0x21 0x5A 0x00
|
||||||
|
i2cset -f -y 16 0x28 0x00 2
|
||||||
|
i2ctransfer -f -y 16 w3@0x28 0x0D 0x54 0x0B
|
||||||
|
//0.695V
|
||||||
|
i2cset -f -y 16 0x28 0x00 1
|
||||||
|
i2ctransfer -f -y 16 w3@0x28 0x21 0x5A 0x00
|
||||||
|
i2cset -f -y 16 0x28 0x00 2
|
||||||
|
i2ctransfer -f -y 16 w3@0x28 0x1D 0xAC 0x05
|
||||||
|
//0.753V
|
||||||
|
i2cset -f -y 14 0x20 0x00 0
|
||||||
|
i2ctransfer -f -y 14 w3@0x20 0x21 0x2D 0x01
|
||||||
@@ -0,0 +1,188 @@
|
|||||||
|
//0.930V
|
||||||
|
i2cset -f -y 13 0x25 0x00 0
|
||||||
|
i2ctransfer -f -y 13 w3@0x25 0x21 0x89 0x00
|
||||||
|
i2cset -f -y 13 0x25 0x00 2
|
||||||
|
i2ctransfer -f -y 13 w3@0x25 0x0D 0x34 0x11
|
||||||
|
//0.930V
|
||||||
|
i2cset -f -y 15 0x26 0x00 0
|
||||||
|
i2ctransfer -f -y 15 w3@0x26 0x21 0x89 0x00
|
||||||
|
i2cset -f -y 15 0x26 0x00 2
|
||||||
|
i2ctransfer -f -y 15 w3@0x26 0x0D 0x34 0x11
|
||||||
|
//0.775V
|
||||||
|
i2cset -f -y 13 0x25 0x00 1
|
||||||
|
i2ctransfer -f -y 13 w3@0x25 0x21 0x6A 0x00
|
||||||
|
i2cset -f -y 13 0x25 0x00 2
|
||||||
|
i2ctransfer -f -y 13 w3@0x25 0x1D 0xAA 0x06
|
||||||
|
//0.775V
|
||||||
|
i2cset -f -y 15 0x26 0x00 1
|
||||||
|
i2ctransfer -f -y 15 w3@0x26 0x21 0x6A 0x00
|
||||||
|
i2cset -f -y 15 0x26 0x00 2
|
||||||
|
i2ctransfer -f -y 15 w3@0x26 0x1D 0xAA 0x06
|
||||||
|
//0.775V
|
||||||
|
i2cset -f -y 13 0x21 0x00 0
|
||||||
|
i2ctransfer -f -y 13 w3@0x21 0x21 0x6A 0x00
|
||||||
|
i2cset -f -y 13 0x21 0x00 2
|
||||||
|
i2ctransfer -f -y 13 w3@0x21 0x0D 0x52 0x0D
|
||||||
|
//0.775V
|
||||||
|
i2cset -f -y 13 0x21 0x00 1
|
||||||
|
i2ctransfer -f -y 13 w3@0x21 0x21 0x6A 0x00
|
||||||
|
i2cset -f -y 13 0x21 0x00 2
|
||||||
|
i2ctransfer -f -y 13 w3@0x21 0x1D 0xAA 0x06
|
||||||
|
//0.775V
|
||||||
|
i2cset -f -y 13 0x22 0x00 0
|
||||||
|
i2ctransfer -f -y 13 w3@0x22 0x21 0x6A 0x00
|
||||||
|
i2cset -f -y 13 0x22 0x00 2
|
||||||
|
i2ctransfer -f -y 13 w3@0x22 0x0D 0x52 0x0D
|
||||||
|
//0.775V
|
||||||
|
i2cset -f -y 13 0x22 0x00 1
|
||||||
|
i2ctransfer -f -y 13 w3@0x22 0x21 0x6A 0x00
|
||||||
|
i2cset -f -y 13 0x22 0x00 2
|
||||||
|
i2ctransfer -f -y 13 w3@0x22 0x1D 0xAA 0x06
|
||||||
|
//0.775V
|
||||||
|
i2cset -f -y 15 0x23 0x00 0
|
||||||
|
i2ctransfer -f -y 15 w3@0x23 0x21 0x6A 0x00
|
||||||
|
i2cset -f -y 15 0x23 0x00 2
|
||||||
|
i2ctransfer -f -y 15 w3@0x23 0x0D 0x52 0x0D
|
||||||
|
//0.775V
|
||||||
|
i2cset -f -y 15 0x23 0x00 1
|
||||||
|
i2ctransfer -f -y 15 w3@0x23 0x21 0x6A 0x00
|
||||||
|
i2cset -f -y 15 0x23 0x00 2
|
||||||
|
i2ctransfer -f -y 15 w3@0x23 0x1D 0xAA 0x06
|
||||||
|
//0.775V
|
||||||
|
i2cset -f -y 15 0x24 0x00 0
|
||||||
|
i2ctransfer -f -y 15 w3@0x24 0x21 0x6A 0x00
|
||||||
|
i2cset -f -y 15 0x24 0x00 2
|
||||||
|
i2ctransfer -f -y 15 w3@0x24 0x0D 0x52 0x0D
|
||||||
|
//0.775V
|
||||||
|
i2cset -f -y 15 0x24 0x00 1
|
||||||
|
i2ctransfer -f -y 15 w3@0x24 0x21 0x6A 0x00
|
||||||
|
i2cset -f -y 15 0x24 0x00 2
|
||||||
|
i2ctransfer -f -y 15 w3@0x24 0x1D 0xAA 0x06
|
||||||
|
//1.545V
|
||||||
|
i2cset -f -y 13 0x29 0x00 0
|
||||||
|
i2ctransfer -f -y 13 w3@0x29 0x21 0x04 0x01
|
||||||
|
i2cset -f -y 13 0x29 0x00 2
|
||||||
|
i2ctransfer -f -y 13 w3@0x29 0x0D 0x91 0x20
|
||||||
|
//1.545V
|
||||||
|
i2cset -f -y 13 0x29 0x00 1
|
||||||
|
i2ctransfer -f -y 13 w3@0x29 0x21 0x04 0x01
|
||||||
|
i2cset -f -y 13 0x29 0x00 2
|
||||||
|
i2ctransfer -f -y 13 w3@0x29 0x1D 0x49 0x10
|
||||||
|
//0.745V
|
||||||
|
i2cset -f -y 13 0x27 0x00 0
|
||||||
|
i2ctransfer -f -y 13 w3@0x27 0x21 0x64 0x00
|
||||||
|
i2cset -f -y 13 0x27 0x00 2
|
||||||
|
i2ctransfer -f -y 13 w3@0x27 0x0D 0x94 0x0C
|
||||||
|
//0.745V
|
||||||
|
i2cset -f -y 13 0x27 0x00 1
|
||||||
|
i2ctransfer -f -y 13 w3@0x27 0x21 0x64 0x00
|
||||||
|
i2cset -f -y 13 0x27 0x00 2
|
||||||
|
i2ctransfer -f -y 13 w3@0x27 0x1D 0x4C 0x06
|
||||||
|
//0.745V
|
||||||
|
i2cset -f -y 15 0x28 0x00 0
|
||||||
|
i2ctransfer -f -y 15 w3@0x28 0x21 0x64 0x00
|
||||||
|
i2cset -f -y 15 0x28 0x00 2
|
||||||
|
i2ctransfer -f -y 15 w3@0x28 0x0D 0x94 0x0C
|
||||||
|
//0.745V
|
||||||
|
i2cset -f -y 15 0x28 0x00 1
|
||||||
|
i2ctransfer -f -y 15 w3@0x28 0x21 0x64 0x00
|
||||||
|
i2cset -f -y 15 0x28 0x00 2
|
||||||
|
i2ctransfer -f -y 15 w3@0x28 0x1D 0x4C 0x06
|
||||||
|
//0.885V
|
||||||
|
i2cset -f -y 13 0x20 0x00 0
|
||||||
|
i2ctransfer -f -y 13 w3@0x20 0x21 0x62 0x01
|
||||||
|
|
||||||
|
|
||||||
|
//0.930V
|
||||||
|
i2cset -f -y 14 0x25 0x00 0
|
||||||
|
i2ctransfer -f -y 14 w3@0x25 0x21 0x89 0x00
|
||||||
|
i2cset -f -y 14 0x25 0x00 2
|
||||||
|
i2ctransfer -f -y 14 w3@0x25 0x0D 0x34 0x11
|
||||||
|
//0.930V
|
||||||
|
i2cset -f -y 16 0x26 0x00 0
|
||||||
|
i2ctransfer -f -y 16 w3@0x26 0x21 0x89 0x00
|
||||||
|
i2cset -f -y 16 0x26 0x00 2
|
||||||
|
i2ctransfer -f -y 16 w3@0x26 0x0D 0x34 0x11
|
||||||
|
//0.775V
|
||||||
|
i2cset -f -y 14 0x25 0x00 1
|
||||||
|
i2ctransfer -f -y 14 w3@0x25 0x21 0x6A 0x00
|
||||||
|
i2cset -f -y 14 0x25 0x00 2
|
||||||
|
i2ctransfer -f -y 14 w3@0x25 0x1D 0xAA 0x06
|
||||||
|
//0.775V
|
||||||
|
i2cset -f -y 16 0x26 0x00 1
|
||||||
|
i2ctransfer -f -y 16 w3@0x26 0x21 0x6A 0x00
|
||||||
|
i2cset -f -y 16 0x26 0x00 2
|
||||||
|
i2ctransfer -f -y 16 w3@0x26 0x1D 0xAA 0x06
|
||||||
|
//0.775V
|
||||||
|
i2cset -f -y 14 0x21 0x00 0
|
||||||
|
i2ctransfer -f -y 14 w3@0x21 0x21 0x6A 0x00
|
||||||
|
i2cset -f -y 14 0x21 0x00 2
|
||||||
|
i2ctransfer -f -y 14 w3@0x21 0x0D 0x52 0x0D
|
||||||
|
//0.775V
|
||||||
|
i2cset -f -y 14 0x21 0x00 1
|
||||||
|
i2ctransfer -f -y 14 w3@0x21 0x21 0x6A 0x00
|
||||||
|
i2cset -f -y 14 0x21 0x00 2
|
||||||
|
i2ctransfer -f -y 14 w3@0x21 0x1D 0xAA 0x06
|
||||||
|
//0.775V
|
||||||
|
i2cset -f -y 14 0x22 0x00 0
|
||||||
|
i2ctransfer -f -y 14 w3@0x22 0x21 0x6A 0x00
|
||||||
|
i2cset -f -y 14 0x22 0x00 2
|
||||||
|
i2ctransfer -f -y 14 w3@0x22 0x0D 0x52 0x0D
|
||||||
|
//0.775V
|
||||||
|
i2cset -f -y 14 0x22 0x00 1
|
||||||
|
i2ctransfer -f -y 14 w3@0x22 0x21 0x6A 0x00
|
||||||
|
i2cset -f -y 14 0x22 0x00 2
|
||||||
|
i2ctransfer -f -y 14 w3@0x22 0x1D 0xAA 0x06
|
||||||
|
//0.775V
|
||||||
|
i2cset -f -y 16 0x23 0x00 0
|
||||||
|
i2ctransfer -f -y 16 w3@0x23 0x21 0x6A 0x00
|
||||||
|
i2cset -f -y 16 0x23 0x00 2
|
||||||
|
i2ctransfer -f -y 16 w3@0x23 0x0D 0x52 0x0D
|
||||||
|
//0.775V
|
||||||
|
i2cset -f -y 16 0x23 0x00 1
|
||||||
|
i2ctransfer -f -y 16 w3@0x23 0x21 0x6A 0x00
|
||||||
|
i2cset -f -y 16 0x23 0x00 2
|
||||||
|
i2ctransfer -f -y 16 w3@0x23 0x1D 0xAA 0x06
|
||||||
|
//0.775V
|
||||||
|
i2cset -f -y 16 0x24 0x00 0
|
||||||
|
i2ctransfer -f -y 16 w3@0x24 0x21 0x6A 0x00
|
||||||
|
i2cset -f -y 16 0x24 0x00 2
|
||||||
|
i2ctransfer -f -y 16 w3@0x24 0x0D 0x52 0x0D
|
||||||
|
//0.775V
|
||||||
|
i2cset -f -y 16 0x24 0x00 1
|
||||||
|
i2ctransfer -f -y 16 w3@0x24 0x21 0x6A 0x00
|
||||||
|
i2cset -f -y 16 0x24 0x00 2
|
||||||
|
i2ctransfer -f -y 16 w3@0x24 0x1D 0xAA 0x06
|
||||||
|
//1.545V
|
||||||
|
i2cset -f -y 14 0x29 0x00 0
|
||||||
|
i2ctransfer -f -y 14 w3@0x29 0x21 0x04 0x01
|
||||||
|
i2cset -f -y 14 0x29 0x00 2
|
||||||
|
i2ctransfer -f -y 14 w3@0x29 0x0D 0x91 0x20
|
||||||
|
//1.545V
|
||||||
|
i2cset -f -y 14 0x29 0x00 1
|
||||||
|
i2ctransfer -f -y 14 w3@0x29 0x21 0x04 0x01
|
||||||
|
i2cset -f -y 14 0x29 0x00 2
|
||||||
|
i2ctransfer -f -y 14 w3@0x29 0x1D 0x49 0x10
|
||||||
|
//0.745V
|
||||||
|
i2cset -f -y 14 0x27 0x00 0
|
||||||
|
i2ctransfer -f -y 14 w3@0x27 0x21 0x64 0x00
|
||||||
|
i2cset -f -y 14 0x27 0x00 2
|
||||||
|
i2ctransfer -f -y 14 w3@0x27 0x0D 0x94 0x0C
|
||||||
|
//0.745V
|
||||||
|
i2cset -f -y 14 0x27 0x00 1
|
||||||
|
i2ctransfer -f -y 14 w3@0x27 0x21 0x64 0x00
|
||||||
|
i2cset -f -y 14 0x27 0x00 2
|
||||||
|
i2ctransfer -f -y 14 w3@0x27 0x1D 0x4C 0x06
|
||||||
|
//0.745V
|
||||||
|
i2cset -f -y 16 0x28 0x00 0
|
||||||
|
i2ctransfer -f -y 16 w3@0x28 0x21 0x64 0x00
|
||||||
|
i2cset -f -y 16 0x28 0x00 2
|
||||||
|
i2ctransfer -f -y 16 w3@0x28 0x0D 0x94 0x0C
|
||||||
|
//0.745V
|
||||||
|
i2cset -f -y 16 0x28 0x00 1
|
||||||
|
i2ctransfer -f -y 16 w3@0x28 0x21 0x64 0x00
|
||||||
|
i2cset -f -y 16 0x28 0x00 2
|
||||||
|
i2ctransfer -f -y 16 w3@0x28 0x1D 0x4C 0x06
|
||||||
|
//0.885V
|
||||||
|
i2cset -f -y 14 0x20 0x00 0
|
||||||
|
i2ctransfer -f -y 14 w3@0x20 0x21 0x62 0x01
|
||||||
@@ -0,0 +1,188 @@
|
|||||||
|
//0.870V
|
||||||
|
i2cset -f -y 13 0x25 0x00 0
|
||||||
|
i2ctransfer -f -y 13 w3@0x25 0x21 0x7D 0x00
|
||||||
|
i2cset -f -y 13 0x25 0x00 2
|
||||||
|
i2ctransfer -f -y 13 w3@0x25 0x0D 0xB4 0x0F
|
||||||
|
//0.870V
|
||||||
|
i2cset -f -y 15 0x26 0x00 0
|
||||||
|
i2ctransfer -f -y 15 w3@0x26 0x21 0x7D 0x00
|
||||||
|
i2cset -f -y 15 0x26 0x00 2
|
||||||
|
i2ctransfer -f -y 15 w3@0x26 0x0D 0xB4 0x0F
|
||||||
|
//0.725V
|
||||||
|
i2cset -f -y 13 0x25 0x00 1
|
||||||
|
i2ctransfer -f -y 13 w3@0x25 0x21 0x60 0x00
|
||||||
|
i2cset -f -y 13 0x25 0x00 2
|
||||||
|
i2ctransfer -f -y 13 w3@0x25 0x1D 0x0A 0x06
|
||||||
|
//0.725V
|
||||||
|
i2cset -f -y 15 0x26 0x00 1
|
||||||
|
i2ctransfer -f -y 15 w3@0x26 0x21 0x60 0x00
|
||||||
|
i2cset -f -y 15 0x26 0x00 2
|
||||||
|
i2ctransfer -f -y 15 w3@0x26 0x1D 0x0A 0x06
|
||||||
|
//0.725V
|
||||||
|
i2cset -f -y 13 0x21 0x00 0
|
||||||
|
i2ctransfer -f -y 13 w3@0x21 0x21 0x60 0x00
|
||||||
|
i2cset -f -y 13 0x21 0x00 2
|
||||||
|
i2ctransfer -f -y 13 w3@0x21 0x0D 0x12 0x0C
|
||||||
|
//0.725V
|
||||||
|
i2cset -f -y 13 0x21 0x00 1
|
||||||
|
i2ctransfer -f -y 13 w3@0x21 0x21 0x60 0x00
|
||||||
|
i2cset -f -y 13 0x21 0x00 2
|
||||||
|
i2ctransfer -f -y 13 w3@0x21 0x1D 0x0A 0x06
|
||||||
|
//0.725V
|
||||||
|
i2cset -f -y 13 0x22 0x00 0
|
||||||
|
i2ctransfer -f -y 13 w3@0x22 0x21 0x60 0x00
|
||||||
|
i2cset -f -y 13 0x22 0x00 2
|
||||||
|
i2ctransfer -f -y 13 w3@0x22 0x0D 0x12 0x0C
|
||||||
|
//0.725V
|
||||||
|
i2cset -f -y 13 0x22 0x00 1
|
||||||
|
i2ctransfer -f -y 13 w3@0x22 0x21 0x60 0x00
|
||||||
|
i2cset -f -y 13 0x22 0x00 2
|
||||||
|
i2ctransfer -f -y 13 w3@0x22 0x1D 0x0A 0x06
|
||||||
|
//0.725V
|
||||||
|
i2cset -f -y 15 0x23 0x00 0
|
||||||
|
i2ctransfer -f -y 15 w3@0x23 0x21 0x60 0x00
|
||||||
|
i2cset -f -y 15 0x23 0x00 2
|
||||||
|
i2ctransfer -f -y 15 w3@0x23 0x0D 0x12 0x0C
|
||||||
|
//0.725V
|
||||||
|
i2cset -f -y 15 0x23 0x00 1
|
||||||
|
i2ctransfer -f -y 15 w3@0x23 0x21 0x60 0x00
|
||||||
|
i2cset -f -y 15 0x23 0x00 2
|
||||||
|
i2ctransfer -f -y 15 w3@0x23 0x1D 0x0A 0x06
|
||||||
|
//0.725V
|
||||||
|
i2cset -f -y 15 0x24 0x00 0
|
||||||
|
i2ctransfer -f -y 15 w3@0x24 0x21 0x60 0x00
|
||||||
|
i2cset -f -y 15 0x24 0x00 2
|
||||||
|
i2ctransfer -f -y 15 w3@0x24 0x0D 0x12 0x0C
|
||||||
|
//0.725V
|
||||||
|
i2cset -f -y 15 0x24 0x00 1
|
||||||
|
i2ctransfer -f -y 15 w3@0x24 0x21 0x60 0x00
|
||||||
|
i2cset -f -y 15 0x24 0x00 2
|
||||||
|
i2ctransfer -f -y 15 w3@0x24 0x1D 0x0A 0x06
|
||||||
|
//1.455V
|
||||||
|
i2cset -f -y 13 0x29 0x00 0
|
||||||
|
i2ctransfer -f -y 13 w3@0x29 0x21 0xF2 0x00
|
||||||
|
i2cset -f -y 13 0x29 0x00 2
|
||||||
|
i2ctransfer -f -y 13 w3@0x29 0x0D 0x51 0x1E
|
||||||
|
//1.455V
|
||||||
|
i2cset -f -y 13 0x29 0x00 1
|
||||||
|
i2ctransfer -f -y 13 w3@0x29 0x21 0xF2 0x00
|
||||||
|
i2cset -f -y 13 0x29 0x00 2
|
||||||
|
i2ctransfer -f -y 13 w3@0x29 0x1D 0x29 0x0F
|
||||||
|
//0.695V
|
||||||
|
i2cset -f -y 13 0x27 0x00 0
|
||||||
|
i2ctransfer -f -y 13 w3@0x27 0x21 0x5A 0x00
|
||||||
|
i2cset -f -y 13 0x27 0x00 2
|
||||||
|
i2ctransfer -f -y 13 w3@0x27 0x0D 0x54 0x0B
|
||||||
|
//0.695V
|
||||||
|
i2cset -f -y 13 0x27 0x00 1
|
||||||
|
i2ctransfer -f -y 13 w3@0x27 0x21 0x5A 0x00
|
||||||
|
i2cset -f -y 13 0x27 0x00 2
|
||||||
|
i2ctransfer -f -y 13 w3@0x27 0x1D 0xAC 0x05
|
||||||
|
//0.695V
|
||||||
|
i2cset -f -y 15 0x28 0x00 0
|
||||||
|
i2ctransfer -f -y 15 w3@0x28 0x21 0x5A 0x00
|
||||||
|
i2cset -f -y 15 0x28 0x00 2
|
||||||
|
i2ctransfer -f -y 15 w3@0x28 0x0D 0x54 0x0B
|
||||||
|
//0.695V
|
||||||
|
i2cset -f -y 15 0x28 0x00 1
|
||||||
|
i2ctransfer -f -y 15 w3@0x28 0x21 0x5A 0x00
|
||||||
|
i2cset -f -y 15 0x28 0x00 2
|
||||||
|
i2ctransfer -f -y 15 w3@0x28 0x1D 0xAC 0x05
|
||||||
|
//0.753V
|
||||||
|
i2cset -f -y 13 0x20 0x00 0
|
||||||
|
i2ctransfer -f -y 13 w3@0x20 0x21 0x2D 0x01
|
||||||
|
|
||||||
|
|
||||||
|
//0.870V
|
||||||
|
i2cset -f -y 14 0x25 0x00 0
|
||||||
|
i2ctransfer -f -y 14 w3@0x25 0x21 0x7D 0x00
|
||||||
|
i2cset -f -y 14 0x25 0x00 2
|
||||||
|
i2ctransfer -f -y 14 w3@0x25 0x0D 0xB4 0x0F
|
||||||
|
//0.870V
|
||||||
|
i2cset -f -y 16 0x26 0x00 0
|
||||||
|
i2ctransfer -f -y 16 w3@0x26 0x21 0x7D 0x00
|
||||||
|
i2cset -f -y 16 0x26 0x00 2
|
||||||
|
i2ctransfer -f -y 16 w3@0x26 0x0D 0xB4 0x0F
|
||||||
|
//0.725V
|
||||||
|
i2cset -f -y 14 0x25 0x00 1
|
||||||
|
i2ctransfer -f -y 14 w3@0x25 0x21 0x60 0x00
|
||||||
|
i2cset -f -y 14 0x25 0x00 2
|
||||||
|
i2ctransfer -f -y 14 w3@0x25 0x1D 0x0A 0x06
|
||||||
|
//0.725V
|
||||||
|
i2cset -f -y 16 0x26 0x00 1
|
||||||
|
i2ctransfer -f -y 16 w3@0x26 0x21 0x60 0x00
|
||||||
|
i2cset -f -y 16 0x26 0x00 2
|
||||||
|
i2ctransfer -f -y 16 w3@0x26 0x1D 0x0A 0x06
|
||||||
|
//0.725V
|
||||||
|
i2cset -f -y 14 0x21 0x00 0
|
||||||
|
i2ctransfer -f -y 14 w3@0x21 0x21 0x60 0x00
|
||||||
|
i2cset -f -y 14 0x21 0x00 2
|
||||||
|
i2ctransfer -f -y 14 w3@0x21 0x0D 0x12 0x0C
|
||||||
|
//0.725V
|
||||||
|
i2cset -f -y 14 0x21 0x00 1
|
||||||
|
i2ctransfer -f -y 14 w3@0x21 0x21 0x60 0x00
|
||||||
|
i2cset -f -y 14 0x21 0x00 2
|
||||||
|
i2ctransfer -f -y 14 w3@0x21 0x1D 0x0A 0x06
|
||||||
|
//0.725V
|
||||||
|
i2cset -f -y 14 0x22 0x00 0
|
||||||
|
i2ctransfer -f -y 14 w3@0x22 0x21 0x60 0x00
|
||||||
|
i2cset -f -y 14 0x22 0x00 2
|
||||||
|
i2ctransfer -f -y 14 w3@0x22 0x0D 0x12 0x0C
|
||||||
|
//0.725V
|
||||||
|
i2cset -f -y 14 0x22 0x00 1
|
||||||
|
i2ctransfer -f -y 14 w3@0x22 0x21 0x60 0x00
|
||||||
|
i2cset -f -y 14 0x22 0x00 2
|
||||||
|
i2ctransfer -f -y 14 w3@0x22 0x1D 0x0A 0x06
|
||||||
|
//0.725V
|
||||||
|
i2cset -f -y 16 0x23 0x00 0
|
||||||
|
i2ctransfer -f -y 16 w3@0x23 0x21 0x60 0x00
|
||||||
|
i2cset -f -y 16 0x23 0x00 2
|
||||||
|
i2ctransfer -f -y 16 w3@0x23 0x0D 0x12 0x0C
|
||||||
|
//0.725V
|
||||||
|
i2cset -f -y 16 0x23 0x00 1
|
||||||
|
i2ctransfer -f -y 16 w3@0x23 0x21 0x60 0x00
|
||||||
|
i2cset -f -y 16 0x23 0x00 2
|
||||||
|
i2ctransfer -f -y 16 w3@0x23 0x1D 0x0A 0x06
|
||||||
|
//0.725V
|
||||||
|
i2cset -f -y 16 0x24 0x00 0
|
||||||
|
i2ctransfer -f -y 16 w3@0x24 0x21 0x60 0x00
|
||||||
|
i2cset -f -y 16 0x24 0x00 2
|
||||||
|
i2ctransfer -f -y 16 w3@0x24 0x0D 0x12 0x0C
|
||||||
|
//0.725V
|
||||||
|
i2cset -f -y 16 0x24 0x00 1
|
||||||
|
i2ctransfer -f -y 16 w3@0x24 0x21 0x60 0x00
|
||||||
|
i2cset -f -y 16 0x24 0x00 2
|
||||||
|
i2ctransfer -f -y 16 w3@0x24 0x1D 0x0A 0x06
|
||||||
|
//1.455V
|
||||||
|
i2cset -f -y 14 0x29 0x00 0
|
||||||
|
i2ctransfer -f -y 14 w3@0x29 0x21 0xF2 0x00
|
||||||
|
i2cset -f -y 14 0x29 0x00 2
|
||||||
|
i2ctransfer -f -y 14 w3@0x29 0x0D 0x51 0x1E
|
||||||
|
//1.455V
|
||||||
|
i2cset -f -y 14 0x29 0x00 1
|
||||||
|
i2ctransfer -f -y 14 w3@0x29 0x21 0xF2 0x00
|
||||||
|
i2cset -f -y 14 0x29 0x00 2
|
||||||
|
i2ctransfer -f -y 14 w3@0x29 0x1D 0x29 0x0F
|
||||||
|
//0.695V
|
||||||
|
i2cset -f -y 14 0x27 0x00 0
|
||||||
|
i2ctransfer -f -y 14 w3@0x27 0x21 0x5A 0x00
|
||||||
|
i2cset -f -y 14 0x27 0x00 2
|
||||||
|
i2ctransfer -f -y 14 w3@0x27 0x0D 0x54 0x0B
|
||||||
|
//0.695V
|
||||||
|
i2cset -f -y 14 0x27 0x00 1
|
||||||
|
i2ctransfer -f -y 14 w3@0x27 0x21 0x5A 0x00
|
||||||
|
i2cset -f -y 14 0x27 0x00 2
|
||||||
|
i2ctransfer -f -y 14 w3@0x27 0x1D 0xAC 0x05
|
||||||
|
//0.695V
|
||||||
|
i2cset -f -y 16 0x28 0x00 0
|
||||||
|
i2ctransfer -f -y 16 w3@0x28 0x21 0x5A 0x00
|
||||||
|
i2cset -f -y 16 0x28 0x00 2
|
||||||
|
i2ctransfer -f -y 16 w3@0x28 0x0D 0x54 0x0B
|
||||||
|
//0.695V
|
||||||
|
i2cset -f -y 16 0x28 0x00 1
|
||||||
|
i2ctransfer -f -y 16 w3@0x28 0x21 0x5A 0x00
|
||||||
|
i2cset -f -y 16 0x28 0x00 2
|
||||||
|
i2ctransfer -f -y 16 w3@0x28 0x1D 0xAC 0x05
|
||||||
|
//0.753V
|
||||||
|
i2cset -f -y 14 0x20 0x00 0
|
||||||
|
i2ctransfer -f -y 14 w3@0x20 0x21 0x2D 0x01
|
||||||
Reference in New Issue
Block a user