24 Releases 24 Tags

RSS Feed

• V1.2.5 16da1c68f2

  Compare

  v1.2.5 — Switch-board rail power in every snapshot, a raw BER run, and tools to turn off unused lanes Stable

  etwen released this 2026-10-21 09:01:55 +08:00 | 7 commits to main since this release

  ✨ New features

  PMON snapshots now carry the switch-board rail power

  • utils/setup_pmon.ttl calls TH6_SWB0_power_readback.sh and TH6_SWB1_power_readback.sh right after show platform current — the 19 rails of each switch board with V × I and a TOTAL POWER line.
  • setup_pmon is shared, so this lands in Script A, B, C, 4 and 5 alike.

  blanton_ber_debug.sh — the hand-run BER flow as one command

  • Runs exactly what tools/BER_Test.txt does: prbs set p=p31 → prbs get twice → prbsstat STArt Interval=30 → sleep 40 → prbsstat Ber → STOp → prbs clear.
  • Every bcmcmd output is printed as is, under a ### [time] unit N: ... header — no parsing, no PASS/FAIL, no summary. For looking at the raw output on the bench; blanton_ber.sh remains the judged version.
  • -u 0 / -u 1 for one switch unit; both by default. BER_POLY, BER_INTERVAL, BER_WAIT and BER_PORTS can be overridden from the environment.

  retimer_lanes.sh / unused_lanes.sh — turn off TX on lanes nothing is cabled to

  • retimer_lanes.sh <asic> <addr> <lane_map> <off|on|status> acts on one Agera3 retimer, sys and line side. --method squelch (default, TX squelch, lanes stay powered) or --method power (TX+RX power-down, needs an agera3 that has the power command). It reads the state back afterwards and prints PASS / FAIL.
  • unused_lanes.sh <off|on|status> applies that to a built-in table — 14 retimer rows and one direct-TH6 row (TSC31, cd112-cd115) — on both switch boards. --asic 0|1|all, --th6 to also disable the TH6 ports behind the retimer rows, --only <target> for a single row. Ends with ok / refused / failed counts.
  • off is refused on a lane that receives a signal (RX PMD lock, or link up on a TH6 port) unless --force is given.

  5_1_Blanton_Script_Boot_Cycle_Fast.ttl — the boot cycle without the traffic run (standalone)

  • Identical to Script 5, except Check Pt8 only runs blanton_traffic_linespeed ps — no init / start / 15 s / stop / report. A shorter cycle when the point is the number of boots.

  Boot cycle shows its count in the window title

  • Script 5 and 5_1 set the Tera Term title to Reboot Cycle Test : n or Power Cycle Test : n each round.

  🐛 Bug fixes

  qfx5252-stress-usb now runs with --force in Script B and in the boot cycles.

  📦 Downloads

  File	Contents
  Script_ABC_Blanton_V1.2.5.zip	The full Tera Term working directory, including Blanton_Script/ to copy onto the DUT

  chmod +x ~/Blanton_Script/*.sh
  grep -rlU $'\r' ~/Blanton_Script    # expect no output
  

  ⚠️ Before you run

  • chmod +x after deploying. The power readbacks are called by path from every PMON snapshot, and unused_lanes.sh refuses to start unless retimer_lanes.sh next to it is executable.
  • Script 4 now reads the switch-board power twice per round — once inside setup_pmon, once from its own loop. Harmless, but the log carries both.
  • blanton_ber_debug.sh uses p=p31 (verified on the bench); blanton_ber.sh, and so Script A / C, still sets p=3. The two may not be measuring the same pattern — do not compare their BER directly until that is settled.
  • blanton_ber_debug.sh leaves out port 268, the same list as BER_Test.txt. Add it with BER_PORTS="...,268".
  • EN_Cold_Warm_boot = 0 (the config.ttl default) hangs Script 5 and 5_1. Set it to 1 (reboot) or 2 (power cycle).
  • Script 5 and 5_1 are two copies of the same macro — a fix to one has to be made to the other.
  • Script 4 has no teardown: finish it with blanton_tr518.sh stop and systemctl stop mlucas-amm.
  • FAN_SPEED is 100.

  🔗 Links

  • ARCHITECTURE.md — test flow, data models, constraints
  • CLAUDE.md — commands and the bench gotchas

  Full changelog: V1.2.4...V1.2.5

  Downloads

  • Script_ABC_Blanton_V1.2.5.zip
    243 KiB

    2026-10-21 09:02:13 +08:00
  • Source Code (ZIP)
  • Source Code (TAR.GZ)