etwenandClaude Opus 5.5
5b2777d547
Script 4_1, blanton_tr518_thermal.sh, blanton_multiphase_read.sh and Script_User_Guide.md are added to the V1.2.7 block of Script A's history and to docs/release-notes/v1.2.7.md, which V1.2.7 is re-released with. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_0131orciRKrejchsuDk6UpXk
70 lines
4.9 KiB
Markdown
70 lines
4.9 KiB
Markdown
# v1.2.7 — FDR on the cabled ports only, vendor NFC tool v2.5, and a tester user guide
|
||
|
||
## ✨ New features
|
||
|
||
**`Script_User_Guide.md` — the tester guide, shipped in the package**
|
||
* Part 1: copying `Blanton_Script/` from a USB stick onto the DUT (mount, copy, `chmod +x`, CRLF check), every `config.ttl` setting, and what Scripts A, B and C run, step by step.
|
||
* Part 2: the usage of every tool in `Blanton_Script/`, including the full LTC2980 margin guide.
|
||
|
||
**`4_1_Blanton_Script_thermal.ttl` — Script 4 with an idle phase and the thermal tr 518 load**
|
||
* 300 idle rounds first (PMON snapshot, SWB0/SWB1 rail power, AMD CPU power), then `blanton_tr518_thermal.sh start` and the full-load loop.
|
||
* The full-load loop also logs `nvme smart-log` / `smartctl -x` every round and waits with a DUT-side `sleep 1` instead of `pause 60`.
|
||
|
||
**`blanton_tr518_thermal.sh` — `tr 518` with the thermal-test arguments**
|
||
* Same as `blanton_tr518.sh` (start / stop, `-u`, `-w`, `--no-wait`, `-n`), but runs
|
||
`tr 518 Scenario=6 Profile=2 portstopktszstride=1 Count=260 PktSize=603,218 CheckLinkTime=20 CheckDataTime=200 TestPhase=1`.
|
||
* Override the arguments with `TR_THERMAL_ARGS`, not `TR_TEST_ARGS`.
|
||
|
||
**`blanton_multiphase_read.sh` — read back the SWB multiphase VRMs**
|
||
* Reads the controllers `blanton_multiphase_margin.sh` writes (SWB0 = i2c-13/15, SWB1 = i2c-14/16): one row per chip with VOUT / VOUT2, IOUT / IOUT2, POUT (V × I) and TEMP, plus the total power per board.
|
||
* Every voltage and current is followed by the raw PMBus word in hex, e.g. `0.740(0x0128)`.
|
||
|
||
## 🐛 Bug fixes
|
||
|
||
**`blanton_fdr.sh` no longer prints the uncabled ports** (v1.0.1)
|
||
* The default port list was `'1-259,270-565'`, which also covered ports nothing is cabled to (cd15..19, cd47..51, cd111..115, ...).
|
||
* It is now the cabled-port list from `blanton_traffic_linespeed.sh` (`TL_PS_PORTS`), the same one `blanton_ber_debug.sh` uses:
|
||
`1-24,40-96,112-168,184-240,256-259,270-308,310-327,342-380,382-399,414-452,454-471,486-524,526-543,558-565`.
|
||
* Script A, B and C pick this up with no change to the TTLs.
|
||
|
||
## 📦 Vendor tool update
|
||
|
||
**`blantons_nfc_validate.py` v2.3 → v2.5** — the customer's `qfx5252-nfc-validate`, renamed to keep the name `nfc_polling.sh` calls.
|
||
* New: `--read-ndef` (Type 2 / Type 4 NDEF, Text and AMD FRU records), `--write-ndef` / `--set-location`, `--max-ndef-bytes`; NCI data packets with credit flow control.
|
||
* Fixed: a `FileNotFoundError` crash while listing the processes that hold the NFC device open.
|
||
* Bad arguments now print `[FAIL]` and exit 1 — `nfc_polling.sh` counts that as **FAIL**, not ERROR.
|
||
* The default `test --debug` output (`[PASS]` / `[FAIL]` lines, `NFCID1=`) is unchanged, so `nfc_polling.sh` is not modified.
|
||
|
||
## 📦 Downloads
|
||
|
||
| File | Contents |
|
||
|---|---|
|
||
| `Script_ABC_Blanton_V1.2.7.zip` | The full Tera Term working directory, including `Blanton_Script/` to copy onto the DUT |
|
||
|
||
```bash
|
||
chmod +x ~/Blanton_Script/*.sh
|
||
grep -rlU $'\r' ~/Blanton_Script # expect no output
|
||
python3 ~/Blanton_Script/blantons_nfc_validate.py --version # expect 2.5
|
||
```
|
||
|
||
## ⚠️ Before you run
|
||
|
||
* **`4_1_Blanton_Script_thermal.ttl`, `blanton_tr518_thermal.sh` and `blanton_multiphase_read.sh` have not been run on the bench yet.** Check that `tr 518` prints `TR 518 TEST PARAMETERS` on both units the first time.
|
||
* **`4_1_Blanton_Script_thermal.ttl` has no teardown, like Script 4**: finish it with `blanton_tr518_thermal.sh stop` **and** `systemctl stop mlucas-amm`.
|
||
* **`blanton_multiphase_read.sh` names 0x21 / 0x22 PU105 / PU102** (from `blanton_pwr_data.sh`), the reverse of the PHYTILE mapping in `blanton_multiphase_margin.sh`; the totals are not affected. Do not run it while `blanton_multiphase_margin.sh` is writing.
|
||
* **Port 268 (ce0, 100G uplink) is not in the FDR list** — as before. Add it with `FDR_PORTS="...,268"` if FDR is wanted there.
|
||
* **The cabled-port list now lives in three scripts** — `blanton_traffic_linespeed.sh`, `blanton_ber_debug.sh`, `blanton_fdr.sh`. Change all three when the cabling changes.
|
||
* **Never put the NFC write flags (`--write-ndef`, `--set-location`, `--confirm-write`) in `NFC_ARGS`** — polling would rewrite the tag every round.
|
||
* **`blanton_fdr.sh stop` (`fdrstat STOp`) is still unverified on the bench**; see v1.2.6.
|
||
* **Nothing turns the unused lanes back on**; run `unused_lanes.sh on` by hand. See v1.2.6.
|
||
* **`blanton_ber.sh` (Script A / C) still uses `p=3` and `sleep 30`**; see v1.2.5.
|
||
* **Script 4 has no teardown**: finish it with `blanton_tr518.sh stop` **and** `systemctl stop mlucas-amm`.
|
||
* **`FAN_SPEED` is 100.**
|
||
|
||
## 🔗 Links
|
||
|
||
* [ARCHITECTURE.md](https://etgit.et-wen.com/etwen/Blanton_TTL_Script/src/branch/main/ARCHITECTURE.md) — test flow, data models, constraints
|
||
* [CLAUDE.md](https://etgit.et-wen.com/etwen/Blanton_TTL_Script/src/branch/main/CLAUDE.md) — commands and the bench gotchas
|
||
|
||
**Full changelog:** [V1.2.6...V1.2.7](https://etgit.et-wen.com/etwen/Blanton_TTL_Script/compare/V1.2.6...V1.2.7)
|