etwen/Blanton_TTL_Script
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases 18 Wiki Activity

Compare commits

base: etwen/Blanton_TTL_Script:fd35857d80007f661f582caf09ab0a8c0563c00b
Branches Tags
etwen/Blanton_TTL_Script:main
etwen/Blanton_TTL_Script:V1.2.1 etwen/Blanton_TTL_Script:V1.2.0 etwen/Blanton_TTL_Script:V1.1.8 etwen/Blanton_TTL_Script:V1.1.7 etwen/Blanton_TTL_Script:V1.1.6 etwen/Blanton_TTL_Script:V1.1.5 etwen/Blanton_TTL_Script:V1.1.4 etwen/Blanton_TTL_Script:V1.1.3 etwen/Blanton_TTL_Script:V1.1.2 etwen/Blanton_TTL_Script:V1.1.1 etwen/Blanton_TTL_Script:V1.1.0 etwen/Blanton_TTL_Script:V1.0.11 etwen/Blanton_TTL_Script:V1.0.10 etwen/Blanton_TTL_Script:V1.0.9 etwen/Blanton_TTL_Script:V1.0.8 etwen/Blanton_TTL_Script:V1.0.7 etwen/Blanton_TTL_Script:V1.0.5 etwen/Blanton_TTL_Script:V1.0.3
...
compare: etwen/Blanton_TTL_Script:V1.2.0
Branches Tags
etwen/Blanton_TTL_Script:main
etwen/Blanton_TTL_Script:V1.2.1 etwen/Blanton_TTL_Script:V1.2.0 etwen/Blanton_TTL_Script:V1.1.8 etwen/Blanton_TTL_Script:V1.1.7 etwen/Blanton_TTL_Script:V1.1.6 etwen/Blanton_TTL_Script:V1.1.5 etwen/Blanton_TTL_Script:V1.1.4 etwen/Blanton_TTL_Script:V1.1.3 etwen/Blanton_TTL_Script:V1.1.2 etwen/Blanton_TTL_Script:V1.1.1 etwen/Blanton_TTL_Script:V1.1.0 etwen/Blanton_TTL_Script:V1.0.11 etwen/Blanton_TTL_Script:V1.0.10 etwen/Blanton_TTL_Script:V1.0.9 etwen/Blanton_TTL_Script:V1.0.8 etwen/Blanton_TTL_Script:V1.0.7 etwen/Blanton_TTL_Script:V1.0.5 etwen/Blanton_TTL_Script:V1.0.3
55 Commits
fd35857d80 ... V1.2.0
Author SHA1 Message Date
etwenandClaude Opus 5 29ec4c2239 docs: Update CLAUDE / ARCHITECTURE for V1.2.0 and add the release note 
CLAUDE.md: status to V1.2.0 / 2026-09-07; the PRBS paragraph now says the
A/B/C call sites were deleted in V1.1.9 rather than commented out; the
DSC scan and parser get a commands block and a line in the status
summary; the soak loop uses sleep 60; the bcmcmd gotcha records that
bcm_dsc_scan.sh hit the same stdin trap on 2026-09-07 and why the
existing marker check could not see it; and a new gotcha on pause versus
sleep.

ARCHITECTURE.md: bcm_dsc_scan.sh / bcm_dsc_parse.sh in the tree and a
Key Features row of their own; EN_TX_FIR in the config.ttl line; Script A
ref to V1.2.0 and the A / B / C rows updated for the DSC steps and sleep;
constraint 10 extended with the recurrence; new constraint 18 (pause
stops the macro, sleep stops the DUT) with the old 18 renumbered to 19
and EN_TX_FIR added to it; the git tag checkbox to V1.2.0; the PRBS and
bmc_monitor_ddr known issues corrected from "commented out" to "deleted";
and a new known issue for the DSC scan being off by default and sharing
ports with the other traffic tools.

Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_014RetWKFZFG1ZHcitQAyhwM
 2026-09-07 10:02:42 +08:00
etwenandClaude Opus 5 d73b119dc3 feat(ttl): Wait on the DUT with sleep, and gate the DSC scan on EN_TX_FIR 
Every 'pause N' in Scripts A, B and C is now 'sendln "sleep N"' followed
by 'wait prompt_sonic_root'.

pause stops the macro for N seconds without touching the DUT: the shell
sits idle and the macro is guessing how long the previous command needed.
On a loaded DUT the guess runs short, the next command goes out before
the previous one has finished, and the whole run ends up a beat ahead of
the switch. Putting the wait on the DUT means the macro resumes when the
prompt actually returns, so the two cannot drift apart - and the wait
lands in the console log with a timestamp, so a round that ran long is
visible afterwards.

Durations changed with it: the management-ping sample in Script A is 15 s
(was 30) and the settle after each traffic 'clear' is 5 s (was 15). The
traffic run stays 15 s and Script B's monitor loop stays 60 s. Script 4
and Script 5 were not converted; the 'pause 1' at the top of B and C
stays, since it runs before there is a prompt to wait for.

EN_TX_FIR gates the DSC scan in Script A and Script C, and the four cp
lines that carry blanton_dsc_Script{A,C}_u{0,1}.log out with the job
logs. It defaults to 0: a full scan is ~10 min and both scripts do one,
so leaving it off keeps ~20 min out of a routine run.

Script C also stops printing bmc_poll.log and mlucas_amm_log to the
console. Both are still copied to /host/hw-eval/jobs and out to the USB
stick, so nothing is lost - the master log is just shorter.

Script A's header goes to V1.2.0 and its Version History covers all of
the above.

Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_014RetWKFZFG1ZHcitQAyhwM
 2026-09-07 10:02:42 +08:00
etwenandClaude Opus 5 79a3604ac4 fix(dsc): bcmcmd was eating the port list, so only one port was scanned 
The scan loop read its port file on stdin. bcmcmd reads stdin too, so the
first call swallowed the rest of the file and the loop ended after a
single port.

Nothing about that looked wrong. The log held one PORT marker and one dsc
block, the marker-to-dump comparison passed because both counts shrank
together, the exit code was 0, and a 445-port scan just finished in
seconds.

The loop now reads on fd 3 (done 3< "$PORTFILE") and bcmcmd is given
< /dev/null. A second check compares the iteration count against the port
list count - the marker/dump comparison cannot see a loop that ends
early, so it needed a number that does not shrink with it. The Saved:
line reports dumps out of TOTAL rather than out of markers.

This is the same bcmcmd trap blanton_traffic_linespeed.sh hit at v0.3.1,
where only the first VLAN was configured.

Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_014RetWKFZFG1ZHcitQAyhwM
 2026-09-07 10:02:25 +08:00
etwenandClaude Opus 5 b84188322d feat(ttl): Take a SerDes DSC dump in Script A and Script C 
Script A scans just before 'show uptime', Script C just before the NVMe
error info, so the pair brackets the soak:

    ./Blanton_Script/bcm_dsc_scan.sh -f blanton_dsc_ScriptA.log -F
    ./Blanton_Script/bcm_dsc_scan.sh -f blanton_dsc_ScriptC.log -F

Neither name carries %u, so the scan inserts _u0 / _u1 itself and unit 1
cannot overwrite unit 0 - that is where the four file names Script C
copies to /host/hw-eval/jobs come from. The scan already copies its own
output there; the explicit cp lines are a second pass, so a copy that
fails inside the scan still leaves the data on the USB stick.

Also removed the commented-out 100G PRBS call sites from all three
macros, along with a duplicated commented 100G port status block in
Script A and the stale bmc_monitor_ddr.sh block in Script C. They had
been dead since bring-up. port_prbs_monitor.sh still ships and still
runs by hand.

Script A's header goes to V1.1.9 and its Version History covers all of
the above, including the note that both new scripts are recorded 100644
and need chmod +x on the DUT.

Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_014RetWKFZFG1ZHcitQAyhwM
 2026-09-06 23:22:59 +08:00
etwenandClaude Opus 5 b4148c9571 feat(dsc): Add the SerDes DSC scan and its offline CSV parser 
bcm_dsc_scan.sh runs

    bcmcmd -n <unit> -c "dsh -c 'phydiag <port> dsc'"

over the whole port list (one 100G port plus the 200G ranges, ~445 in
total) on both units, writes the raw log under <script_dir>/log, and
copies it to /host/hw-eval/jobs. -f names the log (%u -> u0/u1, %t ->
timestamp), -F overwrites, -u picks one unit, -n dry runs, -C skips the
copy.

Two things it deliberately does not do:

  - judge success by bcmcmd's exit code. The diag shell rejects commands
    and bcmcmd still exits 0, so the script counts
    "SERDES DISPLAY DIAG DATA END" markers instead. Same trap
    blanton_traffic_linespeed.sh hit.
  - resolve ~. Script A calls it after sudo -i, so paths are derived
    from $0 rather than $HOME.

Output is one line per port when stdout is not a tty, so it does not
flood the Tera Term log, and it ends with "### DSC_SCAN_DONE rc=<n>" for
a TTL wait to key on.

bcm_dsc_parse.sh is the host-side half: raw log -> <prefix>_lane.csv
(TXEQ / RXFFE / DFE / EYE / SNR per lane) and <prefix>_pm.csv (per
pm_id). POSIX sh + awk, no Python. Lane rows are read by the order of
their bracket groups rather than by fixed columns, so the SDK re-spacing
its output does not break parsing; a row whose group count is not 9 is
reported as UNPARSED on stderr instead of being parsed wrongly.

A full scan is about 10 minutes.

Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_014RetWKFZFG1ZHcitQAyhwM
 2026-09-06 23:22:50 +08:00
etwenandClaude Opus 5 eacb218da8 feat(ttl): Run Script 4's CPU stress as the same systemd unit 
The thermal / safety macro started mlucas-avx2 with '&', exactly as
Script B used to, so it carried the same failure: the load ended quietly
when the console went away - in the one test where a long, steady full
load is the entire point of the run.

It now uses the same mlucas-amm transient unit, and 'systemctl is-active
mlucas-amm' joins 'bgctl list' and 'jobs' in the monitor loop.

Script 4 still has no teardown section, so the matching stop stays
manual, and it is now two commands rather than one:

    blanton_tr518.sh stop
    systemctl stop mlucas-amm

Closing Tera Term no longer stops the CPU load, and 'kill $(jobs -p)'
never could reach a unit. Script A's V1.1.8 history, CLAUDE.md,
ARCHITECTURE.md and the release note all say so now; the version stays
V1.1.8.

Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_014RetWKFZFG1ZHcitQAyhwM
 2026-09-06 17:31:33 +08:00
etwenandClaude Opus 5 4648f936c7 docs: Update CLAUDE / ARCHITECTURE for V1.1.8 and add the release note 
CLAUDE.md: status to V1.1.8 / 2026-09-06; the soak loop now prints
'systemctl is-active mlucas-amm'; hammer/ added to the folder list with
why it is not in git; the --runtime gotcha notes the new 3600 default;
three new gotchas - kill_all_process.ttl cannot reach a systemd unit, a
missing config.ttl variable aborts the macro rather than reading as 0,
and the log timestamp FORMAT lives in TERATERM.INI, not in the script.

ARCHITECTURE.md: hammer/ and the config.ttl knobs in the project tree;
Script A ref V1.1.7 -> V1.1.8; Script B and Script C rows rewritten for
the systemd unit; constraint 1 notes that mlucas-amm now outlives the
session; two new constraints (17 - whoever moves a stress job to systemd
owns the matching stop, and Script 4 still uses '&'; 18 - config.ttl
completeness and the TERATERM.INI timestamp format); the git tag
checkbox to V1.1.8; and three known issues - the bundle no longer ships
hammer/, mlucas-amm's '~' depends on systemd's environment, and the
three stress durations are deliberately different lengths.

Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_014RetWKFZFG1ZHcitQAyhwM
 2026-09-06 17:22:00 +08:00
etwenandClaude Opus 5 9cdd651d79 feat(ttl): Run the CPU stress as a systemd unit, and add two config knobs 
mlucas-avx2 was backgrounded with '&' in the login shell, so it belonged
to that one terminal. Close Tera Term, drop the console, or reconnect on
a different session and the load was gone - and 'jobs' from the new
session showed nothing to say so. A multi-day soak could spend most of
its length with an idle CPU while the thermal numbers looked fine.

Script B now starts it as a transient unit:

  systemd-run --unit=mlucas-amm --property=Type=exec \
    --property=Restart=always --property=RestartSec=2 ...

The log is truncated once with '>' before the unit starts and appended
with '>>' inside it, so a restart adds to the run instead of erasing it.
'systemctl is-active mlucas-amm' now sits beside 'jobs', both in the
one-shot check and in every pass of the monitor loop. The old '&' line is
kept commented out above the new one to fall back to.

Script C has the matching stop. utils/kill_all_process.ttl is only
"kill $(jobs -p)" and a systemd unit is not a shell job, so without this
the load would have run through the post-test snapshot and into the next
test - every temperature and power reading taken at full load, with
nothing in 'show interfaces status' to reveal it. mlucas_amm_log is
copied to /host/hw-eval/jobs/ with the other stress logs.

Two values move into config.ttl:

  EN_timestamp      feeds logopen's 5th argument in Script A, so the
                    per-line timestamp is a knob rather than a literal 1
  BMC_USB_RUNTIME   feeds Script B's ping unit; it was hard-coded to
                    -w 14400 (4 h), which no longer matched the soak
                    lengths the SSD and USB knobs were being set to

SSD_RUNTIME and USB_RUNTIME also go 600 -> 3600, so the shipped default
is a one hour stress rather than the ten minutes V1.1.7 went out with.
--runtime is still the job's overall limit; COUNT does not multiply it.

Script A's Version History carries the V1.1.8 entries for all of this.

Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_014RetWKFZFG1ZHcitQAyhwM
 2026-09-06 17:21:52 +08:00
etwenandClaude Opus 5 4f2f9ed090 chore(publish): Keep the mlucas binaries out of git and the bundle 
src/Script_ABC_Blanton/hammer/ is ~99 MB of unstripped mlucas ELF
binaries (avx512 / avx2 / avx / sse2 / generic-c). They come with the DUT
image, so this repo has no reason to carry them - and a binary tree that
size is permanent once committed: every clone pays for it forever.

publish.sh excluded them too, because rsync copies whatever happens to be
sitting in src/. Without the exclude the delivery bundle was ~100 MB from
a machine that had the binaries and ~200 KB from a fresh clone.

While there, usage() read a fixed line range of the header, so adding a
Version History entry pushed code into the usage text. It now reads up to
the first line of code.

Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_014RetWKFZFG1ZHcitQAyhwM
 2026-09-06 17:21:39 +08:00
etwenandClaude Opus 5 1a06367ade docs: Record V1.1.7 in Script A's history, and update CLAUDE / ARCHITECTURE 
Script A's Version History gains the reboot-cycle macro, the Script B timeout
fix, the tmp/ rule and the stress knobs.

CLAUDE.md: current status to V1.1.7, a Script 5 paragraph, tmp/ in the folder
list, and two gotchas rewritten - the timeout one now covers both restore
positions, and --runtime is described as the job's overall limit rather than
"a 24 hour ceiling". Dropped the stale "TR518 not scripted yet" line.

ARCHITECTURE.md: Script 5 in the tree and in Key Features, tmp/ in the tree,
constraint 14 extended with "copy the :label along with the goto", and two
known issues added for the parts not yet run on hardware.

Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_014RetWKFZFG1ZHcitQAyhwM
 2026-09-04 22:44:21 +08:00
etwenandClaude Opus 5 1fbdcc23d6 feat(reboot): Add a standalone reboot-cycle macro 
5_Blanton_Script_Reboot_Cycle.ttl loops: login -> sudo -i -> date -s -> fan
speed -> wait_init -> Check Pt1..Pt13 -> show uptime -> reboot -> wait for the
next boot. The cycle number is printed in the banner of every round.

Like Script 4 it is standalone: it does not chain to A -> B -> C and does not
use hw-test-session. Every cycle is a fresh boot, so there is nothing to carry
over and nothing to tear down.

The cdc_ncm probe was copied out of Script B without its :skip_ping label, so
'goto skip_ping' had no target. Tera Term does not check labels at load time -
it raises the error only when it actually jumps, i.e. only when the NCM
interface is missing, which is exactly the run where something is already
wrong. The label is now there, and timeout is restored BEFORE the branch so
one line covers both paths: the ping block waits on a 'sleep 10', already two
thirds of the 15 s cap on a loaded DUT.

Dmesg_i2c and PCIE Error Counters both announced themselves as Check Pt12;
the second is now Pt13.

Not verified on hardware yet. Two things to confirm on the bench: that
wait "Booting in blind mode" really appears in this build's boot output (it
has no timeout guard, so a changed string waits forever), and that re-running
bmc-first-enroll every cycle is safe.

Also ignore tmp/ - scripts not yet run on a DUT stage there, so an unverified
script cannot reach the publish bundle where the tester cannot tell it apart
from the rest.

Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_014RetWKFZFG1ZHcitQAyhwM
 2026-09-04 22:44:21 +08:00
etwenandClaude Opus 5 0d2faef565 feat(scriptb): Move the stress durations into config.ttl, and restore the timeout sooner 
SSD_RUNTIME / SSD_COUNT and USB_RUNTIME / USB_COUNT replace the values that
were hard-coded in Script B, so a site changes them in one place. COUNT is
passed straight through as --passes.

--runtime is the job's OVERALL limit, not a per-pass one: qfx5252-stress-*
stops after RUNTIME seconds whatever --passes says. RUNTIME 600 is a ten
minute stress, not 600 x COUNT. A 24 hour soak needs RUNTIME 86400.

Also restore timeout = 0 on the cdc_ncm success path. It was restored only at
:skip_ping, which the success path reaches several waits later - until then
every wait gave up after 15 s instead of blocking, and a wait that returns
without eating the prompt puts the macro a beat ahead of the DUT.

Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_014RetWKFZFG1ZHcitQAyhwM
 2026-09-04 22:44:05 +08:00
etwenandClaude Opus 5 a9c56ee1d4 feat(multiphase): Add a way back from a margin without a power cycle 
blanton_multiphase_margin.sh gains 'normal', which returns all 38 rails
to their nominal set point from tools/Multiphase_Normal.txt. Same rails,
same per-rail reporting, same -u 0|1|all as the margin profiles.

Until now the tool could apply high3/low3/comboA/comboB and commit with
save, but had no way to undo. That left a power cycle as the only exit -
and worse, a save run while still margined would have written the offsets
into NVM, which a power cycle does not undo either.

Emitted commands were diffed against the source file: argv identical.

The nominal labels in the source carry extra text ("0.900V (nominal)",
"0.8V(nominal) , 0.8591V with load line"); the per-rail line prints just
the voltage so the column matches the other profiles. The load-line note
is kept as a comment above the data block, because reading 0.859 V back
from TH6_CORE after 'normal' looks like a failed write and is not one.

Script A -> V1.1.7.

Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_014RetWKFZFG1ZHcitQAyhwM
 2026-09-04 09:23:25 +08:00
etwenandClaude Opus 5 78a8f641c9 fix(scriptc): Capture the BMC USB service log to a file, not the console 
journalctl now runs with -o short-iso into log/bmc_usb_net.log and is
copied into the job directory with the other monitor logs. rm -f first so
the file covers this run only, and the ISO timestamps line up with
mgmt_ping.log and nfc_poll.log for cross-referencing.

The cost, recorded rather than glossed over: it is no longer echoed to
the console, so the USB copy is the only copy. That cp return value is
not checked - the same shape as the nfc_polling.log filename bug, which
failed silently and was only noticed back at the desk with a job archive
missing a file.

Folded into V1.1.6 rather than bumping: the tag has not moved on and this
is the same delivery.

Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_014RetWKFZFG1ZHcitQAyhwM
 2026-09-02 21:44:06 +08:00
etwenandClaude Opus 5 25e1ce0068 fix(pdb): Read the bricks on the pages the datasheet actually specifies 
Every PDB reading came back NA, and the cause was a base error. The four
ADPM12200 bricks put each measurement on its own PMBus PAGE, written
before the read. The bring-up spreadsheet listed those page numbers in
decimal but with an 0x prefix:

    Vin  PAGE 9  -> it said 0x00   (0x09)
    Iin  PAGE 10 -> it said 0x10   (0x0A)
    Vout PAGE 2  -> it said 0x02    correct by luck
    Iout PAGE 14 -> it said 0x14   (0x0E)
    Temp PAGE 18 -> it said 0x18   (0x12)

Only Vout worked, because 2 reads the same in either base. Hence Iin and
Iout answering 0xFFFF, Temp answering 0x0000, and a Vin scale factor
having to be invented to make 50 V appear out of a page-0 register.

pwr_brick.sh reads all five bricks with the right pages and the
datasheet's DIRECT equation, X = (1/m)(Y x 10^-R - b): voltage Y x 8 mV,
current Y x 0.04 A, temperature Y x 0.01 C. Cross-checked rather than
assumed - READ_VOUT 0x05D4 decodes to 11936 mV, exactly what
'show platform voltage' reports for that rail through a separate sensor
path. The datasheet is committed alongside so the numbers are checkable.

Left flagged: Table 3 does not list READ_VIN or READ_IIN. They borrow the
voltage and current coefficients here, which is consistent with a ~50 V
input but is not something the datasheet states.

Each value is re-read until it passes three checks: not 0xFFFF, not
0x0000, and inside a plausibility window. The window is the one that
matters - this bus corrupts the HIGH BYTE only, which turns 11.98 V into
32.00 V. Positive, plausible in magnitude, and invisible to any all-ones
filter. 0x0000 is rejected for the mirror-image reason: on the
temperature register it decodes to a believable 0 C.

Adds comboA/comboB margin profiles per board. comboB is comboA with every
direction flipped, so the pair covers each rail high and low while its
neighbours sit the other way. NC channels stay nominal in both - there is
nothing to margin on an unused rail.

Script C re-enables the BMC USB journalctl dump, which had been commented
out, so that service log now reaches the master log.

Script A -> V1.1.6.

Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_014RetWKFZFG1ZHcitQAyhwM
 2026-09-02 16:35:45 +08:00
etwenandClaude Opus 5 215fed6e95 fix(stress): Keep the SSD and USB jobs alive for the whole soak 
qfx5252-stress-usb was started with --runtime 60. It finished a minute
into an overnight run and the USB path sat idle for the rest of the
night - nothing failed, nothing said so, and the log looked complete.
SSD had the same shape at --runtime 3600. Both are now 86400, and the
BMC DDR memtester drops its loop count so it runs until stopped.

86400 is 24h, not forever. Past that SSD and USB die quietly and the
only clue is the shorter bgctl list Script B already prints each round.
Said so in the version history, the release notes and ARCHITECTURE.

Adds blanton_multiphase_margin.sh: the multiphase controllers on both
switch boards over the native i2c buses (SWB0 on i2c-13/15, SWB1 on
-14/-16), 19 rails each. high3/low3/comboA/comboB set voltages and print
one line per rail; save commits them and prints Multiphase Save All,
because that list has no per-rail mapping to report against.

Two hazards it carries: save is STORE_USER_ALL and permanent, and these
are NOT the LTC2980s margin.sh drives - the two tools reach the same
rails from opposite sides with no interlock between them.

The emitted commands were diffed against tools/Multiphase_*.txt: argv
identical for all five. The rail-to-netname mapping was cross-checked
against the bus numbers rather than trusted by line position - blocks
1..19 are all bus 13/15 and 20..38 all 14/16, matching the SWB0/SWB1
split of Multiphase_Netname.

blanton_traffic_linespeed v0.7.0 appends PatternRandom=yes to every tx
including ce0, and the defaults become tx 200 length=324. A fixed
pattern can sit on a benign bit sequence for a whole run; a changing one
is what exposes a weak lane. -r no forces fixed, -r "" omits the
argument for an SDK that will not take it. Bytes per burst went 51200 ->
64800, so absolute counter totals do not carry across this build - the
pair cross-check that decides PASS/FAIL does.

Script A -> V1.1.5.

Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_014RetWKFZFG1ZHcitQAyhwM
 2026-09-01 11:04:45 +08:00
etwenandClaude Opus 5 db44f72352 feat(thermal): Add a standalone thermal/safety run, and move margin out of the soak loop 
4_Blanton_Script_thermal_safety.ttl brings the DUT up the way Script A
does, then loads it - mlucas-avx2 -cpu 0:15 in the background plus
blanton_tr518.sh start - and samples platform data and both switch
boards' rail power every minute. Power per rail under sustained full
load, over hours, is the whole point of it.

It is standalone: nothing starts it, it starts nothing, and it must not
share a DUT with Script B because both take over the cd ports.

It also has no teardown. When you interrupt it the unit is still in
port cd lb=mac / l2 learn off / test mode nr=yes and mlucas is still
running, and show interfaces status does not reveal any of that. Called
out in the version history, the release notes, CLAUDE.md gotchas and the
ARCHITECTURE future-work list, because whoever uses the box next will not
find out on their own.

Script B's per-round loop drops the margin scan. The loop is meant to be
a quick minute-by-minute sample and margin_status_all.sh walks nine
LTC2980s over I2C, which dominated the round. Script C takes it instead,
once, before show uptime. The trade-off is real: margin drift DURING the
soak is no longer visible, only a start and an end reading. Documented
rather than glossed over, with a suggestion (scan every N rounds) if it
needs to come back.

Script C also sends exit and waits for "Script done" before
hw-test-session finish, so finish runs in the login shell rather than
inside the session it is closing.

Adds docs/Blanton_Test_Flow.drawio: all four scripts side by side, with
the config flags that change each step marked, Script B's one real goto
drawn, and the A->B->C handoffs shown as the manual steps they are.

The new script arrived LF-only while every other .ttl is CRLF and
.gitattributes marks *.ttl as -text, so what is committed is exactly what
Tera Term reads. Converted.

Script A -> V1.1.4.

Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_014RetWKFZFG1ZHcitQAyhwM
 2026-08-31 22:19:38 +08:00
etwenandClaude Opus 5 9cc41f6fbd fix(margin): Reference VNOM to what the rails run at, and split profiles per CONN 
86 of the 144 margin channels moved up +0.8% .. +2.5% to the measured
median for this platform (3.3 -> 3.38, 0.9 -> 0.915, 0.8 -> 0.82, ...).

That is not a display change. VNOM is the denominator of margin_status'
deviation %, and it is also the basis margin_set derives high/low/OV/UV
from - so both the number you read and the voltage you apply move with
it. A rail steady at 0.756 V used to read +0.80% against a nominal 0.75
and now reads 0.00%. Margin logs from before and after cannot be
compared: the reference moved, the hardware did not.

comboA/comboB are replaced by combo_SWB_CONN13..16_{high,low}. The
per-channel percentages are positional, so they follow the rails of one
specific board - applying a CONN13 profile to a CONN16 margins the wrong
rails and nothing detects it. SWB0 and SWB1 share a profile per CONN
because their rails are identical.

Fixes two things the deletion broke:
  - margin_apply_profile_all.sh still named comboA for all nine boards,
    which would now stop at "Profile not found" nine times over. It names
    the matching per-CONN profile instead, with CB on the generic
    combo_high3, and a note that the low pass is _high -> _low.
  - docs/LTC2980_channel_map.csv is generated from settings/*.conf, so
    all 86 changed rails were stale in it. Regenerated.

The eight new profiles also still carried comboA's header comment
("alternating high/low"), which describes neither what they contain nor
what they are for.

Script A -> V1.1.3.

Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_014RetWKFZFG1ZHcitQAyhwM
 2026-08-30 22:13:43 +08:00
etwenandClaude Opus 5 bc2b529c3a feat(nfc): Poll the NFC tag through the soak instead of sampling it once 
nfc_polling.sh wraps blantons_nfc_validate.py in a background loop and
keeps score: start/stop/status/tail/report/clear/fg. Script A takes a
30s baseline, Script B starts the poll for the soak, Script C stops it
with the other monitors and reports.

report only reads the log, so it can be run mid-soak without disturbing
anything - and it says RUNNING so a snapshot is not read as the final
answer. Each round appends a machine-readable RESULT line, which keeps
the tally independent of the tool's wording.

ERROR is counted apart from FAIL. A round where the tool printed neither
[PASS] nor [FAIL] - crashed, missing, hung past the timeout - measured
nothing, and that is a different fault from a tag that would not read.
Rolling them together hides whichever one you are not looking for.

Two habits from earlier bugs are baked in: tail does not follow (tail -f
never returns and a macro waiting on the prompt hangs there), and the .py
is called through python3 rather than ./ (it arrives mode 100644 and a
USB copy carries no execute bit).

Also fixes Script C copying "nfc_polling.log" to the job dir when the
file is "nfc_poll.log". The cp failed, nothing checked it, and the run
finished looking fine - you would find out at the desk, with a job
archive that had no NFC log in it.

Script A -> V1.1.2.

Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_014RetWKFZFG1ZHcitQAyhwM
 2026-08-28 22:41:02 +08:00
etwenandClaude Opus 5 c3b0d49145 fix(session): Clear the last run's jobs and session before starting 
After a run that ended badly - Tera Term closed, DUT rebooted mid-soak,
macro stopped by hand - the stress jobs kept running and the test session
stayed open. The next run then started on a box that was already loaded.
Nothing errored; the numbers were just quietly wrong.

Script A now opens with hw-test-session finish, bgctl reset --yes,
bgctl stop --all, then bgctl list. The list is the point of the sequence:
it is the one line in the log that proves the DUT was idle at the start.

Script A -> V1.1.1.

Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_014RetWKFZFG1ZHcitQAyhwM
 2026-08-28 22:04:31 +08:00
etwenandClaude Opus 5 59861cf953 feat(ber,power): Add the BER sweep and TR518 load; keep ce0 actually sending 
Three new tools and one fix to an old one.

blanton_ber.sh - PRBS BER across every cabled port, init/start/report/
stop/clear, -u 0|1|all. A lane passes only below 1e-6 (equal to the
threshold fails). report ends with a per-unit summary carrying the worst
lane, so an all-PASS run still shows how much margin there was. init
checks every lane locked, because an unlocked lane still reports a BER
and it is a meaningless one. Script C runs it after the traffic report,
following SWB_UNIT0/SWB_UNIT1 like the traffic block does.

blanton_tr518.sh - the built-in packet test, used to load the rails
before measuring power. start settles 120s so the reading afterwards is
loaded rather than mid-ramp. stop sends port cd lb=none and nothing else,
exactly what the bench procedure does - l2 learning and test mode are
left as start set them, and stop says so instead of quietly leaving the
box in a state nobody asked about.

TH6_SWB{0,1}_power_readback.sh - 19 rails, V x I and total. These read
the two sensor tables ONCE. The previous version read them per rail: 38
invocations of a slow CLI at 38 different instants, so the "total" was a
sum of readings seconds apart - and under load the currents move (TH6_CORE
186 A -> 636 A). A rail missing from the table now warns on stderr instead
of silently contributing 0 W.

blanton_traffic_linespeed.sh - ce0 (VLAN 138) joins the test. It has no
loopback partner and a switch never sends a frame back out its ingress
port, so a tx burst was one round trip and then silence. init now sets an
ingress mirror of ce0 back to itself; the mirrored copy is not
egress-filtered, so packets keep lapping until stop turns the mirror off.
stop is what ends it - removing the VLAN membership does not, because the
copy never consulted the VLAN. TL_CE_MODE also drops to 'self': ps ce
shows one ce port per unit and a unit-0-only burst returned on unit 0.
Read as cross-unit, both links dying would still report PASS (0 == 0).

Fixes a parser bug worth remembering: bcmcmd returns CRLF, and the BER is
the last token on its line, so the CR stayed glued to the number. Every
lane read as NA, and printing the CR sent the cursor to column 1 so the
RESULT column overwrote the start of the row. One stray \r, two symptoms.

Not yet verified on hardware, all called out in the release notes: the
ce0 mirror (destport == srcport may be refused), the 120s settle (tr 518
may be time-limited), and 'test mode nr=no' on stop.

Script A -> V1.1.0.

Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_014RetWKFZFG1ZHcitQAyhwM
 2026-08-28 16:33:40 +08:00
etwenandClaude Opus 5 43314444e9 feat(config): Run the fans at full speed by default 
FAN_SPEED 30 -> 100. A soak is a thermal test of everything except the
cooling, so the cooling should not be one of the variables in it. At 30%
a long run can throttle partway through, and throttled results read like
a different fault entirely.

Folded into V1.0.11 rather than bumping the version: the tag has not
moved on and this is the same delivery.

Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_014RetWKFZFG1ZHcitQAyhwM
 2026-08-28 10:32:07 +08:00
etwenandClaude Opus 5 4854da8518 feat(margin): Save every LTC2977 in one command, and stop lying about failures 
margin_save discarded the result of every write, so a NACK printed
"Change Saved" exactly like a successful store. For the one permanent
operation in this tool that is the worst place to stay quiet. Each store
is now checked, named on failure, and reflected in the exit code.

STORE_USER_ALL also went out as 0x15 followed by a dummy 0x00 - an SMBus
write-byte where the command is a send-byte. The LTC2977 tolerated it,
but tolerance is not correctness. Now i2cset ... 0x15 c on the native
path and a no-data cb_pmbus_write on the FPGA path.

Two new subcommands:

  margin_save all      - all nine boards in settings/, then re-init
                         whichever board was loaded beforehand so a
                         following margin_status still reports the board
                         you were looking at. Does not stop on the first
                         failure; a half-saved set is harder to reason
                         about than a fully-attempted one.

  margin_save blanton  - this platform exposes the CB FPGA F3 I2C
                         channels as native Linux i2c buses (Ch6->13,
                         Ch7->14, Ch8->15, Ch9->16; CB stays on bus 4),
                         so all 18 LTC2977 can be stored with plain
                         i2cset: no margin_init, no FPGA channel setup,
                         no pcimem. 18 commands instead of 42.

The 18 raw commands were verified on the DUT 2026-08-27; the wrapper was
tested against stubbed hardware only. Release notes say so.

Board list is MARGIN_BLANTON_STORE at the top of margin.sh - comment out
what this DUT does not have rather than letting it talk to absent boards.
Missing bus and unresponsive chip are reported as distinct failures.

MARGIN_STORE_SETTLE (0.5s) sits between stores because nothing here polls
the part's busy bit, and blanton fires 18 in a row.

Script A -> V1.0.11.

Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_014RetWKFZFG1ZHcitQAyhwM
 2026-08-28 08:39:31 +08:00
etwenandClaude Opus 5 15ea776b82 feat(soak): Show the background jobs each round, and stop the loop spinning 
Script B's monitoring loop had no pause at all - each round started the
instant the last one ended, so an overnight soak filled the log with
near-identical samples taken seconds apart. The section was even labelled
"Get data every 10mins" while running with no delay whatsoever.

The loop now ends each round with pause 60 and prints both job lists:
bgctl list for the platform job runner, jobs for anything the macro
backgrounded in that shell. A stress job that dies mid-soak shows up as a
shorter list on the next round instead of going unnoticed until the end.

60s is still hard-coded and the Status sheet asks for 10 minutes, so the
Phase 3 item stays open - this makes the loop sane, it does not close it.

Also adds docs/LTC2980_channel_map.csv: the nine settings/*.conf flattened
into one Board,CONN,Ch,NetName,Vnom sheet, generated by
tools/gen_channel_map.sh. The CSV is output, not source. NC channels are
kept as NC/- because the channel number is also the PMBus page - dropping
the gaps would shift every channel after them.

Two things the merged table makes visible: SWB0 and SWB1 carry identical
net names and voltages (only the bus and CB_I2C_CH differ), so those are
two copies that can drift apart silently; and there are exactly 8 NC
channels, all on CONN14/CONN15.

tools/100G_PRBS.txt, TR518.txt and fan_ctrl.txt join the existing
traffic_loopback_*.txt references. TR518 is not scripted yet and cannot
share the hardware with blanton_traffic_linespeed - both drive port
loopback and L2 learning.

Script A -> V1.0.10.

Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_014RetWKFZFG1ZHcitQAyhwM
 2026-08-27 14:29:47 +08:00
etwenandClaude Opus 5 03d609cc1f feat(prbs): Add 100G PRBS monitor; fix the job log path and USB mount 
port_prbs_monitor.sh drives PRBS on both 100G uplinks: lpmode off, arm
the pattern, then poll `phy diag <phy> prbs get` in the background until
stopped, counting a poll as PASS only when the output says "PRBS OK!".
prbsstat Ber is captured beside every poll for the record but does not
decide the verdict. `stop` runs prbsstat STOp and prbs clear before
rendering the report, so the test does not leave PRBS armed.

`start a` / `start b` runs one uplink alone, which is how a genuine port
fault is separated from the DUT not coping with two PRBS streams at
once. A port that was not run reports SKIP rather than FAIL -- deciding
on poll count alone would have made a deliberate single-port run look
like half the hardware was broken.

The port status is deliberately not printed at `start`: with PRBS armed
the link reports DOWN, which reads as a failure to anyone glancing at
the console. It appears in the report instead, after prbs clear and
labelled as the recovered state.

The calls in Script A, B and C are committed but commented out -- PRBS
is still under bring-up.

Fix: the job directory was written as /host/hw-eval/current/jobs in some
places and /host/hw-eval/jobs in others, so what Script B wrote was not
what Script C collected. Unified on /host/hw-eval/jobs.

Fix: Script C copied to /mnt/usb assuming it was mounted. It now finds
the device with usb_target.sh and mounts it first, so the logs actually
leave the DUT.

Script C also reorders its results -- stress logs, then the MGMT ping
report, then 100G status -- and cats the bgctl ssd/usb logs.

Script A -> V1.0.9. Docs and docs/release-notes/v1.0.9.md updated.

Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_014RetWKFZFG1ZHcitQAyhwM
 2026-08-26 15:35:48 +08:00
etwenandClaude Opus 5 5e1e4a6a8f docs(release): Add v1.0.8 notes; wire mgmt ping status into B and C 
Script A: the baseline ping window is 30 s rather than 45, and the log
is cleared afterwards so Script B starts from nothing.

Script B: `status` after `start`, and Script C: `status` before `stop`
plus a `cat` of the report. The status line shows both pids and the
replies received per NIC, so a dead link is visible while the soak is
still running instead of only at the end.

docs/release-notes/v1.0.8.md written in the house format.

Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_014RetWKFZFG1ZHcitQAyhwM
 2026-08-26 10:13:34 +08:00
etwenandClaude Opus 5 a31c186142 feat(mgmt): Ping both NICs at once, and stop counting ARP as loss 
The bench run reported FAIL=3 with no NIC errors and no drops. All three
failures were on eth1 and all three were missing exactly icmp_seq=1,
with the other nine replies present and sub-millisecond. That is
neighbour resolution: once the ARP entry for the target expires, the
first echo request is spent resolving it and ping counts it as loss.
Rounds sat about 24 s apart, right on the edge of the default reachable
time, so it happened on some rounds and not others.

mgmt_ping_monitor.sh V3.0.0:

- One discarded ping per NIC before the measured run resolves ARP, so
  MAX_LOSS_PCT can stay at 0 and a FAIL means a real drop. Raising the
  threshold instead would have hidden genuine single-packet loss, and a
  longer settle would not help -- nothing triggers ARP until the ping.
- Both NICs now ping at the same time and keep accumulating until
  stopped, rather than alternating fixed bursts. Each writes its own raw
  capture.
- `stop` sends SIGINT rather than SIGTERM, because ping prints its
  statistics block on interrupt and that block is what the report
  parses, then renders into the log: the last TAIL_LINES entries per
  NIC, each one's statistics and verdict, and `ip -s link show` for both
  interfaces.
- `-D -O` are on by default so every line carries a timestamp and a
  request that got no reply is visible in the tail instead of merely
  absent. Clear PING_EXTRA_OPTS if the platform's ping rejects them.

Since the script no longer re-execs itself to daemonise, `bash
mgmt_ping_monitor.sh start` works without the execute bit.

.gitignore: the new *.raw / *.pid / *.state runtime files were outside
the *.log rule and would have been committed.

Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_014RetWKFZFG1ZHcitQAyhwM
 2026-08-26 09:53:20 +08:00
etwenandClaude Opus 5 1b8d5a8e91 feat(usb): Detect the USB target instead of assuming /dev/sda1 
New Blanton_Script/usb_target.sh reports a USB mass-storage device's
node, mount point or by-id path. It excludes whatever disk backs / and
/host -- this platform can boot from a USB DOM, which also reports
TRAN=usb -- refuses to guess when several USB disks are present, falls
back to the whole device for superfloppy media, and when mounting,
checks the result is actually writable rather than trusting that mount
succeeded.

Script B asks it for the device node and builds the stress command from
the answer, so a stick that enumerates as sdb no longer sends the write
test at whatever /dev/sda1 happens to be.

The device is carried back through an echo marker, split in the shell
literal as "<<D""EV=..." so the command echo cannot satisfy the pattern
the macro waits for -- the same false-match guard used for PORTS0= and
NCMIF=, arranged differently.

Script B: DDR memtester drops its 100-pass limit and runs until stopped,
matching the other soak loads.

Fix: Script C ran `bgctl reset --yes` while killing processes, which is
before the job logs are copied to USB. Moved to after the archive and
after hw-test-session finish, so the run's own logs are collected before
anything clears them.

Script A -> V1.0.8 history updated.

Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_014RetWKFZFG1ZHcitQAyhwM
 2026-08-25 17:03:36 +08:00
etwenandClaude Opus 5 cac37583e7 feat(ttl): Include mgmt_ping.log in the USB archive 
Script C now copies log/mgmt_ping.log into
/host/hw-eval/current/jobs/ alongside bmc_poll.log, so the management
link results leave the DUT with the run instead of staying behind. Both
monitors' logs are now covered.

Script A history: the two copies are one action in one block, so they
share a single V1.0.8 line rather than reading as separate changes.

Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_014RetWKFZFG1ZHcitQAyhwM
 2026-08-25 15:57:23 +08:00
etwenandClaude Opus 5 802ee4d467 feat(ttl): Fold bmc_poll.log into the USB archive 
Script C copies log/bmc_poll.log into /host/hw-eval/current/jobs/ before
that directory is archived to USB, so the BMC sampling and I2C
read-back results leave the DUT with the run they belong to rather than
only existing in the Tera Term capture.

The wait moves ahead of the getdate/sprintf2 block; those build strings
without touching the terminal, so the prompt is still consumed exactly
once before the copy is sent.

Script A history updated under the existing V1.0.8 block -- that version
is not tagged yet, so this is the same batch.

Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_014RetWKFZFG1ZHcitQAyhwM
 2026-08-25 15:55:05 +08:00
etwenandClaude Opus 5 166b53983f feat(bmc): Re-enable bmc_monitor with an I2C write/read-back test 
bmc_monitor.sh comes back into the run with a second job beyond the
`free -m` sampling: an I2C pattern test against bus 1, address 0x41,
offset 0x00C0 -- write 55AA55AA and read it back, then write AA55AA55
and read that back. Two complementary patterns catch a stuck bit either
way round, and repeating it through the soak turns an intermittent I2C
fault into something the log shows rather than something the tester has
to catch live.

Script B starts it alongside the other stress; Script C stops it and
cats log/bmc_poll.log.

bmc_monitor_ddr.sh stays disabled -- BMC DDR stress runs through
bgctl + bmc-manager.

Docs: the "disabled" notes I added last time now applied to only half
the pair and read as wrong for bmc_monitor.sh. Split so the monitor is
documented as live with its I2C test, and only the _ddr variant is
marked disabled.

Script A -> V1.0.8.

Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_014RetWKFZFG1ZHcitQAyhwM
 2026-08-25 15:50:56 +08:00
etwenandClaude Opus 5 ef7cbdffd4 docs(release): Add v1.0.7 notes; bump Script A header to V1.0.7 
Script A carried a V1.0.7 history block while its "; Version :" header
still read V1.0.6, so publish.sh built Script_ABC_Blanton_V1.0.6 and the
folder would have disagreed with the tag. Header and date corrected --
reading the version from the header rather than a flag is what surfaced
this.

utils/wait_init.ttl V3.1.1: poll interval 10 s -> 60 s, and the WT_MIN
comments now say "at least" to match the test, which has been
`< WT_MIN` since the threshold was fixed. The stale "more than" wording
described exactly the off-by-one that once hung Script A.

Script C: the BMC USB journalctl dump is commented out.

docs/release-notes/v1.0.7.md written in the house format.

Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_014RetWKFZFG1ZHcitQAyhwM
 2026-08-25 14:22:22 +08:00
etwenandClaude Opus 5 ae8941a844 feat(ttl): Set fan speed in Script A, archive job logs to USB in C 
config.ttl gains FAN_SPEED (30). Script A rebinds the two max31790
controllers (18-0020, 25-0020) and applies the speed with
fan-speed-control.sh, answering its confirmation prompt, so a run starts
from a known thermal state rather than whatever the last test left.

Script A also clears /host/hw-eval/current/jobs before the run, and
Script C copies that directory to /mnt/usb/jobs-<date>_<time> so the
bgctl job logs leave the DUT with the run they belong to.

Fix: 25-0020 was bound twice in a row -- the second bind can only fail,
since the driver is already attached. Removed; the two controllers now
have a matching unbind/sleep/bind each.

Script A -> V1.0.7, history covering the config.ttl and Script C changes
as well.

Docs: fan control and the job-log archive added to Tech Stack, Key
Features and Data Flow; the config.ttl example refreshed with FAN_SPEED
and the SWB_UNIT flags. Three risks recorded in Future Extensions --
`rm` without -r cannot clear the job subdirectories that Script C copies
with -r, the fan confirmation wait has no timeout and would hang
silently if the prompt ever changes, and /mnt/usb is never checked for
being mounted.

Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_014RetWKFZFG1ZHcitQAyhwM
 2026-08-25 14:12:24 +08:00
etwenandClaude Opus 5 a6a12cdf2c docs: Sync ARCHITECTURE and CLAUDE with the bgctl and mgmt-ping work 
Script A: wait 45 s between starting and stopping mgmt_ping_monitor.
`start` returns after one second, but a round is roughly 30 s -- without
the pause the log held only the START banner and no RESULT line.

Docs brought up to date with the eight commits since 419b680:

- Tech Stack gains bgctl, systemd-run, iproute2 and hw-test-session;
  the stress row moves off the hammer scripts
- Structure and Key Features cover mgmt_ping_monitor.sh, and mark
  bmc_monitor{,_ddr}.sh as disabled -- their call sites in B and C are
  commented out, though the files remain
- Data Flow rewritten for all three scripts
- Two constraints added: TTL's `timeout` is global and must be restored,
  and two management NICs on one subnet cause ARP flux (hence
  ARP_STRICT, and nic_tx/nic_rx as the evidence of which NIC sent)
- CLAUDE gotchas add the `ip -s link` column order, that a monitor's
  `start` returns in one second rather than after a round, and that
  show_dmesg now ends with `dmesg -C`
- Phase 3 ticks the move to bgctl; Phase 5 gains the mgmt-ping, NVMe and
  EDAC parsing targets. Future Extensions notes that Script C never cats
  mgmt_ping.log, so the soak's ping results stay on the DUT

Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_014RetWKFZFG1ZHcitQAyhwM
 2026-08-24 23:34:33 +08:00
etwenandClaude Opus 5 e38d24c775 feat: Add mgmt_ping_monitor.sh and move stress onto bgctl 
New Blanton_Script/mgmt_ping_monitor.sh: brings both management NICs up
with iproute2 (`ip link set` / `address replace` / `route replace` with
per-NIC metric) and pings each one's own target -- eth0 -> .30, eth1 ->
.31 -- appending to a rotating log. Same sub-commands as the bmc
monitors, plus `summary` for just the per-leg RESULT lines.

Both NICs stay up, which on a shared subnet lets the target's ARP be
answered by either one, so a reply can land on the NIC that did not
send. ARP_STRICT applies arp_ignore/arp_announce to prevent that, and
each leg logs `ip -s link show` with the interface's own TX/RX packet
delta across the burst as direct evidence of which NIC carried the
traffic. Note `ip -s link` orders columns "bytes packets ...", so the
packet count is the second field.

Script A: hw-test-session start/log/status, a fuller DUT inventory
(version, fwutil, syseeprom, ssdhealth, TPM, nvme smart-log, smartctl),
bmc-first-enroll and bmc-manager version/status, ras-mc-ctl summary, and
both 100G uplinks now brought up rather than 513 being left down.

Script B: stress moves to bgctl (memtester, qfx5252-stress-ssd/-usb) and
the BMC DDR load runs through bmc-manager, replacing the hammer scripts
and the bmc_monitor pair. Adds a BMC USB net test that discovers the
cdc_ncm interface and runs a 4-hour ping under systemd-run.

Script C: stops the bgctl jobs, the BMC USB unit and the mgmt ping, then
collects journalctl, per-NIC counters, ras-mc-ctl and NVMe health, and
closes the session with hw-test-session finish.

utils/show_dmesg.ttl: one combined error regex with `dmesg -T`, an
i2c-filtered view, then `dmesg -C` so Script C's capture shows only what
the soak produced. utils/setup_pmon.ttl: add the TPM FRU/read checks.

Fix: Script B set `timeout = 15` for the cdc_ncm probe and never
restored it, leaving the cap in force for everything after -- including
the traffic init, which walks 108 VLANs per unit and takes far longer
than 15 s. A timed-out wait returns without the prompt, so the macro
would have run ahead of the DUT for the rest of the soak. Reset to 0 at
:skip_ping, where both branches meet.

Script A -> V1.0.6.

Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_014RetWKFZFG1ZHcitQAyhwM
 2026-08-24 23:27:37 +08:00
etwenandClaude Opus 5 9a11c1d5bb fix(ttl): Wait for the prompt before config save in the uplink block 
`config save -y` was sent straight after the Ethernet514 startup with no
wait in between. The shell buffers the second line and still runs it, so
nothing visibly breaks, but every wait from there on matches the prompt
of the previous command -- leaving the macro permanently one step ahead
and issuing `show interfaces status` while `config save` is still
running. Every other sendln in the file waits first; this one now does
too.

Version left at V1.0.5.

Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_014RetWKFZFG1ZHcitQAyhwM
 2026-08-21 12:58:06 +08:00
etwenandClaude Opus 5 cbef5865ec fix(ttl): Treat 216 ports up as ready, and configure the 100G uplinks 
wait_init.ttl: the comparison was strictly greater than WT_MIN, so a unit
reporting exactly 216 never passed and Script A sat in the poll loop
forever. 216 is not an arbitrary number -- TL_PAIRS holds 108 loopback
pairs, so 108 x 2 = 216 is every cabled port being up, i.e. precisely the
state being waited for. Comparison is now `< WT_MIN`, making the
threshold "at least 216".

Script A: bring the 100G uplinks into a known state before reading their
status -- Ethernet513 on asic0, Ethernet514 on asic1 -- and persist it
with `config save -y`. The stray `wait` after show_dmesg is dropped; the
one opening the new block consumes that prompt instead.

Version left at V1.0.5.

Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_014RetWKFZFG1ZHcitQAyhwM
 2026-08-21 12:56:13 +08:00
etwenandClaude Opus 5 8714bbb773 fix(ttl): Compare SWB_UNIT1 in the second operand of the traffic branches 
Rework the traffic blocks in A, B and C as explicit if/elseif branches
holding literal commands, and drop the derived swb_any/swb_opt from
config.ttl -- the branches read straight off the page and there is no
indirection to follow.

All nine conditions compared SWB_UNIT0 against itself, though:

    if     SWB_UNIT0 = 1 && SWB_UNIT0 = 1     ->  SWB_UNIT0 = 1
    elseif SWB_UNIT0 = 1 && SWB_UNIT0 = 0     ->  never
    elseif SWB_UNIT0 = 0 && SWB_UNIT0 = 1     ->  never

so the single-unit paths were unreachable. A DUT with only unit 0 would
have run the both-unit commands and hit bcmcmd on an absent unit 1,
while a DUT with only unit 1 fell through to the empty else and skipped
traffic entirely. Second operand is now SWB_UNIT1.

Verified per branch that the -u argument matches the condition guarding
it: both units carry no -u (tool default TL_UNITS="0 1"), unit-0-only
carries -u 0, unit-1-only carries -u 1, and the else stays empty.

Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_014RetWKFZFG1ZHcitQAyhwM
 2026-08-21 12:19:18 +08:00
etwenandClaude Opus 5 d8bf1f7a41 feat(ttl): Drive traffic and port wait from SWB_UNIT0/SWB_UNIT1 
The bench is not always fully populated. config.ttl now declares which
switch units exist:

    SWB_UNIT0 = 1   ; this DUT has switch unit 0
    SWB_UNIT1 = 1   ; this DUT has switch unit 1

Two values are derived there rather than repeating the same test in
three scripts: swb_any (0 = no unit at all) and swb_opt, the suffix
appended to each blanton_traffic_linespeed call -- "" for both units so
the tool's own TL_UNITS="0 1" applies, " -u 0" or " -u 1" for a single
one.

Script A, B and C build their traffic commands with sprintf2 and the
suffix, wrapped in `if swb_any = 1`. A half-populated DUT no longer
issues bcmcmd against an absent unit, and a DUT with no switch board
skips the traffic stage outright instead of filling the log with
failures.

wait_init.ttl reads the same two flags instead of its own copies, so the
wait and the traffic blocks cannot disagree about what is installed.

Script A -> V1.0.5.

Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_014RetWKFZFG1ZHcitQAyhwM
 2026-08-21 12:06:28 +08:00
etwenandClaude Opus 5 da39122c43 feat(ttl): Let wait_init skip switch units the DUT does not have 
wait_init.ttl V3.0.0 adds WT_UNIT0 and WT_UNIT1 at the top of the file.
Benches are not always fully populated, and V2.0.0 waited on both units
unconditionally, so a DUT with one switch board sat in the poll loop
forever -- silently, since the loop neither advances nor reports.

    both units  -> 1 , 1
    unit 0 only -> 1 , 0
    unit 1 only -> 0 , 1
    no unit     -> 0 , 0   (bypass, returns immediately)

A disabled unit is skipped rather than polled and ignored: its whole
block sits inside the if, so no bcmcmd is issued for it and no
misleading error reaches the log.

Two independent integer flags rather than a "0 1" string, because
parsing a string in TTL needs strscan and this is meant to be edited by
hand at the bench.

All three exit paths still leave exactly one prompt unconsumed, so
Script A's surrounding waits are unaffected.

Script A history: recorded under the existing V1.0.4 block rather than a
new version, matching the consolidation done there.

Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_014RetWKFZFG1ZHcitQAyhwM
 2026-08-21 11:36:38 +08:00
etwenandClaude Opus 5 b66ae47a58 feat(ttl): Read EEPROM, quiet LLDP and clear lpmode before traffic 
Script A: `hpe-eeprom-tlv show --bus 4 --addr 0x50` after `show boot`, so
the board identity is on record next to the image it booted. The empty
Check History placeholder is dropped.

Script A and B: disable the lldp feature and `config save -y` before the
traffic stage, so the switch stops sourcing its own frames and the
loopback pair counters reflect only the injected burst.

Script B: `sfputil lpmode off` on Ethernet513/514 before reading their
status -- a transceiver left in low-power mode will not link.

Script A -> V1.0.5, with the history covering the Script B changes too,
per this project's convention of keeping one consolidated log in A.

Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_014RetWKFZFG1ZHcitQAyhwM
 2026-08-21 11:28:06 +08:00
etwenandClaude Opus 5 d065db7d71 feat(ttl): Gate Script A on bcmcmd port-up count, not thermal sensors 
wait_init.ttl V2.0.0 now polls

    bcmcmd -n 0 -c ps | grep -w up | wc -l
    bcmcmd -n 1 -c ps | grep -w up | wc -l

and proceeds only when BOTH exceed 216, so the baseline is taken with
the data plane actually up rather than merely with pmon answering.

V1.0.0 could use `wait "Thermal Not detected" prompt` because that was a
string-presence test. Comparing a count needs the value captured, so the
count is wrapped in an echo marker and read with waitregex +
groupmatchstr1 + str2int. The command echo cannot false-match: it reads
"PORTS0=$(bcmcmd ..." and the pattern requires a digit immediately after
the "=". The optional-space allowance covers a wc that pads its output.

The two thresholds are compared in nested ifs rather than with `and`,
which is bitwise in TTL.

WT_MIN and WT_INTERVAL are at the top of the file. The enter/exit prompt
contract is unchanged, so Script A's surrounding waits still line up.
Script A -> V1.0.4.

Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_014RetWKFZFG1ZHcitQAyhwM
 2026-08-21 10:41:50 +08:00
etwenandClaude Opus 5 419b680980 feat(publish): Add publish.sh and sync docs for V1.0.3 
publish/publish.sh packages src/Script_ABC_Blanton into
publish/Script_ABC_Blanton_<Ver>/, with -z for a zip, -f to overwrite,
-n for a dry run.

The version is read from Script A's "; Version :" header rather than
passed in, so the folder name cannot disagree with what the tester sees
on opening the macro. The header is CRLF, so the carriage return is
stripped -- left in, it becomes part of the directory name. Captured
logs are excluded (they carry DUT serials) but the empty logs/ is kept
because logopen writes there. .gitignore now admits the tool while
still ignoring its output.

config.ttl: testcase ENV, margin scan off for this run.

Docs brought up to date with the 14 commits since 8aa5c90 -- SWB
channel/address map, the traffic and BMC tooling, line-ending policy,
and the exec-bit and tail -f traps.

Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_014RetWKFZFG1ZHcitQAyhwM
 2026-08-21 09:33:06 +08:00
etwenandClaude Opus 5 4ed283d0ca feat(ttl): Wait for thermal sensors before taking baseline data 
New utils/wait_init.ttl polls `show platform temperature` every 10 s
until it stops reporting "Thermal Not detected", so Script A does not
record a baseline while pmon is still coming up. Script A calls it right
after `show boot` and bumps to V1.0.3.

The include pointed at utils/wait_thermal.ttl while the file is
wait_init.ttl -- as Script A's own V1.0.3 history line says. Corrected;
Tera Term aborts the macro when an include cannot be opened, so this
would have stopped Script A at line 59 on the first run.

Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_014RetWKFZFG1ZHcitQAyhwM
 2026-08-21 09:17:50 +08:00
etwenandClaude Opus 5 491e807cf8 feat(ttl): Log 100G port status, run traffic on both switch units 
Script A and B: `show interfaces status Ethernet513,Ethernet514` before
the traffic stage, so the uplink state is on record next to the counters
it explains. In B this takes the slot the empty "eye measurement"
placeholder held.

Script B: drop -u 0 from the traffic calls. A and C already defaulted to
TL_UNITS="0 1", so B was pinned to unit 0 while C stopped both -- the
soak only ever loaded one switch board, and C's stop hit a unit that was
never initialised. All three scripts now cover both units.

Script B: post-clear settle 10 s -> 15 s, matching A.

Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_014RetWKFZFG1ZHcitQAyhwM
 2026-08-20 23:51:28 +08:00
etwenandClaude Opus 5 18ce7a1a73 fix(ttl): Dump BMC logs with cat instead of the blocking tail 
`bmc_monitor.sh tail` runs `tail -n 50 -f`, which never returns, so
Script C stopped at the first call and never reached CHECK Stress
results, the traffic counters, or the closing messagebox. Stopping the
monitors first made it worse: with the file no longer growing, tail -f
just waits forever.

Read the two logs directly instead, so the whole BMC capture lands in
the master log and the macro carries on.

Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_014RetWKFZFG1ZHcitQAyhwM
 2026-08-20 11:14:34 +08:00
etwenandClaude Opus 5 d1b5cfea0b feat(ttl): Wire BMC monitors into Script B/C, log BMC version in A 
Script A: dump the BMC banner via `bmc-manager run 'cat /etc/issue'`,
and add the missing `wait` before `show boot`.

Script B: start bmc_monitor_ddr.sh and bmc_monitor.sh alongside the
host stress load.

Script C: stop both and dump their logs into the master log.

bmc_monitor.sh: INTERVAL_SEC 5 -> 10.

Known blockers, filed here so they are not lost -- this wiring does not
work yet as written:

1. `bmc_monitor.sh tail` runs `tail -n 50 -f`, which never returns.
   Script C blocks on the first one and never reaches CHECK Stress
   results, the traffic counters, or the final messagebox. It needs a
   non-following dump (cat) instead.

2. Both scripts are mode 100644 and are the first .sh here meant to be
   executed rather than sourced. do_start re-execs "$SCRIPT_PATH"
   __daemon directly, so the execute bit is required even when invoked
   through bash -- and a Windows -> USB -> DUT copy cannot carry it.
   A chmod +x is needed before the start calls, as Script B already
   does for mlucas-avx2.

Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_014RetWKFZFG1ZHcitQAyhwM
 2026-08-20 11:12:03 +08:00
etwenandClaude Opus 5 5e63e3da6b fix(bmc): Give bmc_monitor_ddr its own log so the two can run together 
Both scripts defaulted to LOG_NAME="bmc_poll.log", and PID_FILE is
derived from it, so the monitor and the DDR stress shared one log and
one pid file -- while the whole point of the split is to run them at
the same time.

The failure was quiet rather than loud: is_running greps the pid's
cmdline for its own SCRIPT_NAME, so the second script did not recognise
the first as running and started anyway. prepare_log_on_start then
truncated the log the first one was writing (START_LOG_MODE=new), both
raced on the pid file, and a later stop could only reap whichever wrote
it last, orphaning the other.

bmc_monitor_ddr.sh now uses bmc_ddr.log, which also moves its pid file
to bmc_ddr.pid. Both remain covered by the *.log ignore rule.

Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_014RetWKFZFG1ZHcitQAyhwM
 2026-08-20 11:03:44 +08:00
etwenandClaude Opus 5 855b7a6e30 feat(bmc): Split DDR stress out of bmc_monitor into bmc_monitor_ddr.sh 
bmc_monitor.sh was doing two unrelated jobs: sampling `free -m` every
few seconds, and running `memtester 500M 1` as a stress load. They want
different timeouts -- a monitor should give up in 30 s, a memtester
pass legitimately runs for minutes -- and mixing them meant either
cutting memtester short or letting a hung sample stall the loop.

bmc_monitor.sh now polls `free -m` only, keeping CMD_TIMEOUT_SEC=30.
bmc_monitor_ddr.sh is the stress half: memtester only, with
CMD_TIMEOUT_SEC raised to 3600. The two are otherwise identical.

Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_014RetWKFZFG1ZHcitQAyhwM
 2026-08-20 11:00:04 +08:00
etwenandClaude Opus 5 310f897067 feat(bmc): Add bmc_monitor.sh, log build/uptime/reboot-cause in A and C 
bmc_monitor.sh (V1.1.0): polls the BMC from the SONiC host via
`bmc-manager run`, appending to a rotating log. Runs detached, so no
interactive SSH session to the BMC is needed and the BMC's busybox
toolchain never comes into play. Subcommands start/stop/status/fg/tail/
clear; the polled command list, interval, per-command timeout and log
rotation are configured at the top of the file. START_LOG_MODE defaults
to "new", so one run means one log. Default COMMANDS are `free -m` and
`memtester 500M 1`, i.e. the BMC is memory-stressed alongside the host
soak.

Script A: `show boot` after the time sync to record the image the DUT
booted, and `show uptime` at the end of the traffic baseline.

Script C: `show reboot-cause` and `show uptime` after the traffic
report, so an unplanned reset during the soak is visible in the
closing snapshot rather than only in dmesg.

Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_014RetWKFZFG1ZHcitQAyhwM
 2026-08-20 10:47:35 +08:00
etwenandClaude Opus 5 fedf697977 docs(margin): Realign channel-pairing comments with bench wiring 
The values were corrected in ababb2c but every comment describing the
pairing still said the old one, leaving four confs where the comment
contradicted the line it sat on:

    CB_I2C_CH=8           # CB F3 Ch6 = SWB0 CONN13/CONN14 ...

That reads as a typo waiting to be "fixed" back to 6, which would undo
a bench-verified value. Comments now state the real pairing:

    Ch6 = SWB0 CONN14/CONN16    Ch8 = SWB0 CONN13/CONN15
    Ch7 = SWB1 CONN14/CONN16    Ch9 = SWB1 CONN13/CONN15

Same map corrected in margin.sh's header (two places).

Ref/margin_command_trace.md gets a staleness banner rather than an
edit. Its 1223 expanded cb_pmbus_* commands were generated from the old
values - 487 of them use addresses that no longer exist (0x5D, 0x5F,
0x63, 0x65) - so patching the headings would leave the bodies wrong and
look authoritative. The banner carries the correct table and says the
SWB chapters need regenerating; chapters 1-4 are transport-independent
and remain valid.

Comments only: no CB_I2C_CH value and no CHIPS address was touched.

Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_014RetWKFZFG1ZHcitQAyhwM
 2026-08-19 12:19:44 +08:00
etwenandClaude Opus 5 ababb2c3d1 fix(margin): Correct SWB I2C channels and LTC2977 addresses from bench 
Verified against the DUT. Two things were wrong in the SWB confs.

Channel assignment: CONN13/CONN15 and CONN14/CONN16 were paired the
wrong way round. The bench wiring is

    SWB0  Ch6 = CONN14/CONN16    Ch8 = CONN13/CONN15
    SWB1  Ch7 = CONN14/CONN16    Ch9 = CONN13/CONN15

LTC2977 addresses: the high half of each LTC2980 was recorded one step
above the low half (0x5C/0x5D, 0x62/0x63). These are 7-bit addresses
derived from 8-bit pairs, so they step by two: 0x5C/0x5E and 0x62/0x64.

This also clears the collision noted in v2.6.0, where SWB0_CONN13 chip2
and SWB0_CONN14 chip1 both landed on 0x5E on Ch6. Each channel now
carries two disjoint address pairs (0x5C/0x5E and 0x62/0x64), verified
collision-free across all eight SWB confs.

Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_014RetWKFZFG1ZHcitQAyhwM
 2026-08-19 12:10:39 +08:00
etwenandClaude Opus 5 a9c3dafc22 fix(traffic): Stop report saturating counters at INT32_MAX 
Every value in the report printed as 2147483647 because grp() rendered
counters with sprintf("%d", v). The DUT's awk casts to a 32-bit int for
%d, so any counter above 2^31-1 saturates -- and a real line-speed run
is around 7e11, three orders of magnitude past that. Formatting with
%.0f keeps the value in awk's double domain, which is exact to 2^53.

The FAIL delta line had the same defect (%+d): a dead port makes the
delta as large as the counter itself, so the one number needed to
diagnose the failure would have been the one that saturated.

Verdicts were never affected. The cross-check compares the TX[]/RX[]
doubles directly and only the display path goes through grp(), so past
PASS results stand; only the printed numbers were wrong.

Verified against a captured run (secret/Counter.log, 108 pairs): values
now match the raw MIB_TPOK/MIB_RPOK lines exactly, and the loopback
identity holds (cd0.TX == cd32.RX, cd0.RX == cd32.TX).

Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_014RetWKFZFG1ZHcitQAyhwM
 2026-08-19 09:21:16 +08:00
etwenandClaude Opus 5 4088a828c6 feat(ttl): Add traffic baseline to Script A, tune waits and unit args 
Script A: the TRAFFIC-SETUP-STAGE placeholder is now a full loopback
round (ps, init, clear, show, start, stop, report) with 15 s settles, so
the run has a traffic baseline before the soak starts.

Script B: widen the post-clear settle from 3 s to 10 s.
Script C: drop -u 0 from stop/report so both switch units are covered.

Note: Script B still pins -u 0 while A and C now default to both units.

Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_014RetWKFZFG1ZHcitQAyhwM
 2026-08-19 09:02:41 +08:00
etwenandClaude Opus 5 afb7b1e283 fix(margin): Convert margin.sh and settings to LF, pin line endings 
margin.sh and settings/*.conf carried CRLF into the repo, so sourcing
them on the SONiC DUT failed outright:

    -bash: $'\r': command not found
    margin.sh: line 126: syntax error near unexpected token `$'{\r''

settings/*.conf was the quieter half of the same bug: margin_init
sources them, and an unquoted assignment such as CB_I2C_CH=6 became
"6\r", so the SWB transport would have driven I2C with a malformed
channel number.

Content is unchanged - the diff is carriage returns only, and bash -n
passes on every converted file.

Add .gitattributes so this cannot come back: *.sh/*.conf/*.py/*.txt/*.md
are pinned to LF, *.ttl stays CRLF (Tera Term runs on Windows only) and
office formats are marked binary.

Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_014RetWKFZFG1ZHcitQAyhwM
 2026-08-18 16:34:55 +08:00
95 changed files with 14815 additions and 1419 deletions
Expand all files Collapse all files
.gitattributes
+29
View File
@@ -0,0 +1,29 @@
# =============================================================================
# 換行符政策
# -----------------------------------------------------------------------------
# 這個 repo 同時被 Windows（Tera Term 端編輯）與 SONiC/Linux（DUT 端執行）使用，
# 所以必須明確指定，不能靠各機器的 core.autocrlf。
#
# 踩過的坑：margin.sh 帶著 CRLF 進 repo，scp 到 DUT 後 bash 直接掛：
# -bash: $'\r': command not found
# syntax error near unexpected token `$'{\r''
# settings/*.conf 同樣危險 —— margin_init 是用 source 讀它們的，未加引號的
# 賦值（例如 CB_I2C_CH=6）會變成 "6\r"，SWB transport 會拿著壞掉的通道號去打 I2C。
# =============================================================================
# 在 DUT / Linux 上執行或被 source 的，一律 LF
*.sh text eol=lf
*.conf text eol=lf
*.py text eol=lf
*.txt text eol=lf
*.md text eol=lf
# Tera Term macro 只在 Windows 上跑，維持 CRLF；標成 -text 讓 git 原樣保存，
# 避免對既有檔案產生大量純換行符的假 diff
*.ttl -text
# 二進位，不要做任何轉換
*.xlsx binary
*.docx binary
*.pdf binary
*.h5 binary
.gitignore
+13 -1
View File
@@ -12,9 +12,15 @@ For_AI/
!**/logs/.gitkeep
!**/Logs/.gitkeep
# 打包輸出
# monitor 腳本的執行期產物（原始擷取、pid、狀態）
*.raw
*.pid
*.state
# 打包輸出：產出不進 git，打包工具本身要進
publish/*
!publish/.gitkeep
!publish/publish.sh
# Office 暫存檔
~$*
@@ -22,3 +28,9 @@ publish/*
# 客戶板 schematic 原始檔（機密，勿入 repo）
*.DSN
*.dsn
# 尚未上機驗證的腳本暫存區（不入 repo，測過再搬進 src/）
tmp/
# mlucas 的 ELF binary（~99 MB），DUT image 已內含，不入 repo
src/Script_ABC_Blanton/hammer/
ARCHITECTURE.md
+373 -43
View File
@@ -37,7 +37,13 @@ LTC2980 margin 控制器。TTL 只負責「按順序 `sendln` 並把畫面收進
| 電源 margin | LTC2980（= 2 × LTC2977）over PMBus，LINEAR16 編碼 |
| 錯誤計數來源 | Linux PCIe AER sysfs（`aer_dev_*`）、EDAC sysfs（`dimm_ce/ue_count`） |
| 平台監控 | SONiC `show platform *`（pmon container，含 `leak status` / `leak channels`） |
| 壓力測試 | `mlucas-avx2`（AMD CPU）、`~/hammer/tools/stress_{mem,ssd,usb}.py` |
| BMC 存取 | host 端 `bmc-manager run "<cmd>"`（不需對 BMC 開 SSH，繞開其 busybox 工具鏈）；`bmc-first-enroll` / `bmc-manager version\|status` |
| 背景工作管理 | `bgctl run/list/stop --all/reset`（平台工具）；長時間 ping 用 `systemd-run --unit=` 掛成 transient unit |
| 管理網路 | iproute2（`ip link set` / `ip address replace` / `ip route replace ... metric`）+ `ping -I` |
| 測試 session | `hw-test-session start\|log\|status\|finish`；job log 收在 `/host/hw-eval/jobs/` |
| 風扇控制 | max31790 driver rebind（`/sys/bus/i2c/drivers/max31790/{bind,unbind}`）+ `fan-speed-control.sh <%>` |
| 100G PRBS | `bcmcmd -n <unit> -c 'dsh -c "phy diag <phy> prbs …"'`（set / prbsstat STArt / get / Ber / STOp / clear） |
| 壓力測試 | `mlucas-avx2`（AMD CPU）、`bgctl run` 排程的 `memtester` / `qfx5252-stress-ssd` / `qfx5252-stress-usb` |
| 資料面流量 | `bcmcmd`（Broadcom drivshell）VLAN loopback + `tx` burst，switch unit 0 / 1 |
| 流量報表 | DUT 上 awk（`blanton_traffic_linespeed report`）；離線 `python3 tools/bcm_mibpair_report_V1.1.0.py` |
| 版本控制 | Git（NAS + Gitea 私有 remote；**不推 GitHub，含客戶 NDA 資料**） |
@@ -106,13 +112,17 @@ Blanton_TTL_Script/
│
├── CLAUDE.md # 專案記憶 & 給 Claude 的指令
├── ARCHITECTURE.md # 本架構文件
├── .gitignore # secret/ + For_AI/ + logs 規則
├── .gitignore # secret/ + For_AI/ + tmp/ + hammer/ + logs + publish 產出
├── .gitattributes # 換行符政策：.sh/.conf 釘 LF、.ttl 保持 CRLF
│
├── docs/ # 規格與狀態文件（客戶提供 / 專案產出）
│ ├── Blantons_FPGA_Registers.md # FPGA 暫存器規格（markdown 正本，查 offset 用）
│ ├── Blantons_FPGA_Registers_draft.docx # 同上，客戶原始 docx
│ ├── Blantons_FPGA_Registers_Map_draft.xlsx
│ ├── Blantons_PCIe_AER_and_DDR_EDAC_checks.pdf # AER / EDAC 檢查點依據
│ ├── ADPM12200CMLZxx_DS_Datasheet_*.pdf # PDB brick 手冊（PAGE 與 DIRECT 係數的來源）
│ ├── Blanton_Test_Flow.drawio # A/B/C + 熱安規四支的測試流程圖（draw.io）
│ ├── LTC2980_channel_map.csv # 9 個 settings/*.conf 合併：Board,CONN,Ch,NetName,Vnom（144 列）
│ ├── TTL_Script_Blanton_Status_20260814.xlsx
│ └── TTL_Script_Blanton_Status_20260817.xlsx # ⭐ 最新：三支腳本逐項 Status（OK / On-Going + Owner）
│
@@ -120,9 +130,17 @@ Blanton_TTL_Script/
│ ├── bcm_mibpair_report_V1.1.0.py # 離線解析 drivshell log → per-pair TX/RX + PASS/FAIL
│ ├── traffic_loopback_vlan_setting.txt # bcmcmd VLAN 30..137 建立 + 成對 pbm（cdN <-> cdN+32）
│ ├── traffic_loopback_start.txt # bcmcmd tx 100 length=512 VLantag=<vid>
│ └── traffic_loopback_vlan_remove.txt # bcmcmd vlan remove <vid> pbm=...
│ # ↑ 三份為手動貼上用的原始指令表，
│ # blanton_traffic_linespeed.sh 是其 bash 版
│ ├── traffic_loopback_vlan_remove.txt # bcmcmd vlan remove <vid> pbm=...
│ │ # ↑ 三份為手動貼上用的原始指令表，
│ │ # blanton_traffic_linespeed.sh 是其 bash 版
│ ├── 100G_PRBS.txt # 100G PRBS 原始指令（port_prbs_monitor.sh 的來源）
│ ├── TR518.txt # 內建封包測試 tr 518 → blanton_tr518.sh
│ ├── BER_Test.txt # 全機 PRBS BER 指令 → blanton_ber.sh
│ ├── Multiphase_{high3,low3,comboA,comboB,Save}.txt # → blanton_multiphase_margin.sh
│ ├── Multiphase_Netname # 38 條軌的 net 名稱（區塊順序對應）
│ ├── 100G_Traffic.txt # ce0 VLAN 138 打流 → blanton_traffic_linespeed.sh
│ ├── fan_ctrl.txt # MAX31790 unbind/bind + fan-speed-control.sh 30
│ └── gen_channel_map.sh # settings/*.conf → docs/LTC2980_channel_map.csv（需 gawk）
│
├── secret/ # 🚫 gitignored — DUT 密碼、per-unit BDF、COM 設定
│ ├── README.md # ✅ committed — 用途索引
@@ -131,12 +149,22 @@ Blanton_TTL_Script/
│
├── For_AI/ # 🚫 gitignored — AI 協作素材（波形截圖、草稿）
│
├── publish/ # 可交付的打包輸出（Blanton_Script_ABC_v<ver>_<date>/ + zip）
├── publish/
│ ├── publish.sh # ✅ committed — 打包工具（版號讀 Script A 檔頭）
│ └── Script_ABC_Blanton_<Ver>/ # 🚫 產出，gitignored（-z 另出同名 .zip）
│
├── tmp/ # 🚫 gitignored — 尚未上機驗證的腳本暫存區
│ └── blanton_reboottest.sh # 5_..._Reboot_Cycle.ttl 的 bash 版，測過再搬進 Blanton_Script/
│
└── src/
└── Script_ABC_Blanton/ # ← Tera Term 的工作目錄（整包給測試員）
│
├── config.ttl # 全域設定：testcase 名、EN_Margin / EN_log、三個 prompt 字串
├── 4_Blanton_Script_thermal_safety.ttl # 熱 / 安規：獨立跑，不接 A→B→C
├── 5_Blanton_Script_Reboot_Cycle.ttl # 重開機循環：獨立跑，while 1 無止境（未上機驗證）
├── config.ttl # 全域設定：testcase 名、EN_Margin / EN_TX_FIR / EN_log / EN_timestamp、
│ # 風扇與 SWB 宣告、SSD/USB/BMC_USB 壓力秒數、三個 prompt 字串
├── hammer/ # 🚫 gitignored — mlucas ELF binary（~99 MB），DUT image 自帶，
│ # publish.sh 也排除；Script B / Script 4 只負責 chmod +x 後執行
├── 1_Blanton_Script_A.ttl # Pre-test：登入 → 對時 → source 工具 → 清 AER → 抓基線
├── 2_Blanton_Script_B.ttl # Stress：開壓力程序 → while 1 每輪抓 fan/temp/margin
├── 3_Blanton_Script_C.ttl # Post-test：kill → 再抓一次 → 比對 stress log
@@ -144,10 +172,11 @@ Blanton_TTL_Script/
├── utils/ # 可 include 的取數片段（TTL，無狀態、只 wait+sendln）
│ ├── pcie_bus.ttl # lspci -tvvv / -vv
│ ├── setup_pmon.ttl # show platform summary/fan/temperature/psustatus/voltage/
│ │ # current/ssdhealth/leak status/leak channels（9 項）
│ ├── show_dmesg.ttl # date + dmesg grep error/fail/warning
│ │ # current/ssdhealth/leak status/leak channels + TPM（11 項）
│ ├── show_dmesg.ttl # dmesg -T 合併 error 正則 + i2c 過濾 + dmesg -C 清空
│ ├── show_margin_status.ttl # source margin_status_all.sh（掃 9 顆 LTC2980）
│ ├── kill_all_process.ttl # kill $(jobs -p)
│ ├── wait_init.ttl # 輪詢 show platform temperature 直到 pmon 起來
│ ├── show_pcie_error_reg.ttl # 舊的合併版（已被下列 per-device 版取代）
│ ├── show_pcie_error_reg_TH6_SWB0.ttl # EP 01:00.0 + RP 00:01.1
│ ├── show_pcie_error_reg_TH6_SWB1.ttl # EP 02:00.0 + RP 00:01.2
@@ -167,12 +196,39 @@ Blanton_TTL_Script/
├── blanton_pwr_data.sh # SWB VRM + PDB brick 的 Vin/Vout/Iout/Temp 表
├── blanton_traffic_linespeed.sh # SWB loopback 線速流量（bcmcmd unit 0/1）
│ # init/clear/show/start/stop/ps/report/run
├── mgmt_ping_monitor.sh # 10G/1G 管理網路 ping 監控（iproute2）
│ # eth0→TARGET_10G、eth1→TARGET_1G，兩張卡同時持續 ping
├── port_prbs_monitor.sh # 100G uplink PRBS 測試（bcmcmd phy diag）
│ # ⚠️ V1.1.9 起 A/B/C 內註解掉的呼叫已整段刪除，只剩手動執行
├── blanton_ber.sh # 全機 SerDes BER 掃描（phydiag prbs / prbsstat）
├── bcm_dsc_scan.sh # 全機 SerDes DSC dump（phydiag <port> dsc，~445 port × 2 unit）
│ # 由 EN_TX_FIR 控制，A 與 C 各掃一次；單次約 10 分鐘
├── bcm_dsc_parse.sh # DSC raw log → <prefix>_lane.csv / _pm.csv（純 sh + awk）
├── blanton_multiphase_margin.sh # 多相 VRM margin（原生 i2c，38 條軌）
├── pwr_brick.sh # PDB / CPB power brick 讀值（VI2C ch4）
├── nfc_polling.sh # NFC tag 背景輪詢 + PASS/FAIL 統計
├── blantons_nfc_validate.py # NFC/NCI 驗證工具（廠商提供，未修改）
├── blanton_tr518.sh # TR518 封包測試，量功耗前的負載來源
├── TH6_SWB0_power_readback.sh # SWB0 19 條軌 V×I + 總功耗
├── TH6_SWB1_power_readback.sh # SWB1 同上
│ # ⚠️ 已納入交付，但 A/B/C 的呼叫仍註解掉（bring-up 中）
├── usb_target.sh # 偵測 USB 裝置節點／掛載點（排除系統碟）
├── bmc_monitor.sh # BMC 監控：free -m + I2C 寫入/讀回圖樣測試
├── bmc_monitor_ddr.sh # ⚠️ 已停用：V1.1.9 起 B/C 內的註解區塊已刪除，DDR 壓力走 bgctl + bmc-manager
│ # ↑ 三支都要 chmod +x 才能跑（見 Key Constraints）
└── LTC2980_Margin_Script/ # 電壓 margin 子專案（另有獨立 repo）
├── margin.sh # margin_init/status/set/apply_profile/save
# # v2.7.0：margin_save all / margin_save blanton
├── settings/*.conf # 一個 .conf = 一顆 LTC2980（CB + SWB0/1 × CONN13~16）
├── profiles/*.conf # 16-ch 批次組合（comboA/B、high3/5、low3/5、normal、off）
├── profiles/*.conf # 16-ch 批次組合。SWB 為 per-CONN：
# # combo_SWB_CONN13~16_{high,low}（百分比對應該片的軌）
# # comboA/comboB_{CB,SWB_CONN13~16}（互補棋盤配對）
# # 通用：high3/5、low3/5、normal、all_off
├── script/*_all.sh # 跨 9 顆 LTC2980 的批次 status / apply / save
├── Ref/margin_command_trace.md # 指令追蹤參考（SWB 章節已標過期，見文件內警告）
└── logs/ # margin 操作 log
# 註：v2.6.0 起不再內含 blanton_cb_i2c.sh / blanton_fpga_pcimem.sh 的複本，
# 改由 _swb_find_backend 往上層 Blanton_Script/ 找共用版
```
---
@@ -184,15 +240,20 @@ Blanton_TTL_Script/
### 1. `config.ttl` — 全域測試參數（TTL 變數）
```ini
strTestcase = "Margin" ; 測項名，進 log 檔名
project_name = "Blanton" ; 專案名，進 log 檔名
EN_Margin = 1 ; 1=跑 margin 掃描, 0=跳過
strTestcase = "ENV" ; 測項名（ENV/EMC/Margin...），進 log 檔名
EN_Margin = 0 ; 1=跑 margin 掃描, 0=跳過
EN_log = 1 ; 1=logopen 存檔, 0=不存
FAN_SPEED = 100 ; 傳給 fan-speed-control.sh 的風扇轉速 (%)，預設全速
SWB_UNIT0 = 1 ; 這台有 switch unit 0（流量與 wait_init 都依此）
SWB_UNIT1 = 1 ; 這台有 switch unit 1
prompt_login = "sonic login:"
prompt_sonic = "admin@sonic:~$"
prompt_sonic_root = "root@sonic:~#"
```
> `SWB_UNIT0` / `SWB_UNIT1` 兩個都是 0 時，`wait_init.ttl` 直接 bypass、A/B/C 的流量段整段跳過。
Log 檔名規則：`<mdir>\Logs\<project_name>_<strTestcase>_<YYYYmmdd-HHMMSS>.log`
### 2. `settings/<board>.conf` — 一顆 LTC2980（16 channel）
@@ -203,11 +264,57 @@ Log 檔名規則：`<mdir>\Logs\<project_name>_<strTestcase>_<YYYYmmdd-HHMMSS>.l
| `CB_I2C_CH` | int | `TRANSPORT="swb"` 時的 FPGA I2C 通道（6/7/8/9） |
| `CHIPS[]` | string[2] | `"bus:addr"`，index 0 → CH0~7、index 1 → CH8~15 |
| `CHIP_PRE_CMD[]` / `CHIP_POST_CMD[]` | string[1] | mux 切換等前後置指令，`;` 分隔多筆 |
| `CH<n>_VNOM` | string | 標稱電壓（`"-"` = 未使用 / NC） |
| `CH<n>_VNOM` | string | 這條軌的**基準電壓**（`"-"` = 未使用 / NC） |
| `CH<n>_NET` | string | 電路 net name（對照 schematic） |
Channel 定址：`ch / 8` → `CHIPS[]` index，`ch % 8` → LTC2977 PMBus PAGE（0x00~0x07）。
**`VNOM` 自 2026-08-30 起是「Blanton 實測中位數」，不是規格標稱值。** 144 條軌裡有 86 條
被改上去 +0.8% ~ +2.5%（例：`PVDD3_3V_SYNTH_LDO_*` 3.3 → 3.38、`P0V9_AVDD_*` 0.9 → 0.915、
`PVDD0_8V_T3` 0.8 → 0.82）。這件事影響兩處，**不是只有顯示**：
- `margin_status` 的偏差 % 是對 `VNOM` 算的 —— 以前一條穩定在 0.756 V 的軌顯示 `+0.80%`，
現在顯示 `0.00%`。**舊 log 的偏差 % 不能跟新 log 直接比。**
- `margin_set` 的 high / low / OV / UV **全部由 `VNOM` 推算**（`VNOM × (1 ± change%)`），
所以整個 margin 視窗跟著平移。同樣下 `+3%`，實際打到的絕對電壓比以前高。
**SWB 通道與位址對應（2026-08-19 上機驗證，`ababb2c`）：**
| FPGA I2C 通道 | 板 / 接頭 | LTC2977 位址（lo / hi） |
|---|---|---|
| Ch6 | SWB0 CONN14 / CONN16 | CONN14 `0x5C`,`0x5E` ; CONN16 `0x62`,`0x64` |
| Ch8 | SWB0 CONN13 / CONN15 | CONN13 `0x5C`,`0x5E` ; CONN15 `0x62`,`0x64` |
| Ch7 | SWB1 CONN14 / CONN16 | CONN14 `0x5C`,`0x5E` ; CONN16 `0x62`,`0x64` |
| Ch9 | SWB1 CONN13 / CONN15 | CONN13 `0x5C`,`0x5E` ; CONN15 `0x62`,`0x64` |
> 同一顆 LTC2980 的兩個位址**相差 2**（7-bit，由規格書 8-bit 配對除以 2 而來），不是 1。
> 兩張板共用一條通道，所以同通道上的位址必須互斥 —— 上表兩組（`0x5C/0x5E` 與 `0x62/0x64`）不重疊。
**同一批 LTC2977 也掛在原生 i2c bus 上**（2026-08-27 上機驗證）：Blanton 的 SONiC 把 CB FPGA F3
的這四條 I2C 通道同時註冊成 kernel i2c adapter，因此除了 `cb_pmbus_*` → pcimem 這條路，
還可以用 `i2cset -f -y <bus>` 直接打到同一顆晶片：
| FPGA F3 通道 | Linux bus | CB FPGA 路徑 | 原生 i2c 路徑 |
|---|---|---|---|
| Ch6 | 13 | `cb_pmbus_write 6 <addr> …` | `i2cset -f -y 13 <addr> …` |
| Ch7 | 14 | `cb_pmbus_write 7 <addr> …` | `i2cset -f -y 14 <addr> …` |
| Ch8 | 15 | `cb_pmbus_write 8 <addr> …` | `i2cset -f -y 15 <addr> …` |
| Ch9 | 16 | `cb_pmbus_write 9 <addr> …` | `i2cset -f -y 16 <addr> …` |
`margin.sh` 的 `margin_save blanton` 走原生路徑（`MARGIN_BLANTON_STORE` 表），
其餘功能仍走 `TRANSPORT="swb"` 的 FPGA 路徑。兩條路到的是同一顆 LTC2977，
**不要同時用**（同一條匯流排上兩個 master 語意的存取）。
**全通道 net / 電壓對照：`docs/LTC2980_channel_map.csv`**（9 個 `.conf` × 16ch = 144 列，
欄位 `Board,CONN,Ch,NetName,Vnom`）。查「某個 net 在哪片哪個 channel」比翻 9 個 `.conf` 快。
CSV 是產出物，不是正本 —— 改完 `.conf` 用 `./tools/gen_channel_map.sh` 重產，別手改 CSV。
兩件從表上看得出來、改 `.conf` 時要記得的事：
- **SWB0 與 SWB1 的 net / 電壓完全相同**，差別只在 `CHIPS[]` 的 bus（`0:` vs `1:`）與 `CB_I2C_CH`。
也就是說有兩份會各自漂移的重複資料 —— 改了 SWB0 沒改 SWB1，不會有任何東西擋你。
- **8 個 NC 通道**（SWB0/1 CONN14 的 CH10/CH11/CH13、CONN15 的 CH10）在 CSV 裡以
`NC` / `-` 原樣保留，不是漏掉；濾掉它們會讓 page 編號對不上。
### 3. `profiles/*.conf` — 16-ch 批次 margin 組合
```bash
@@ -267,16 +374,32 @@ PROFILE_CHANNELS=( "0:high:8" "1:low:8" ... ) # "channel:operation:change_perc
| 模組 | 進入點 | 功能 |
|------|--------|------|
| **Script A（Pre-test）** | `1_Blanton_Script_A.ttl` | root 登入 → `mkdir ./logs` → `date -s` 對時 → source **六個** bash 工具 → 清/讀 7 組 PCIe AER → `lspci -tvvv/-vv` → margin 全掃 → PMON 九項 → dmesg 三 grep → `messagebox` 提示接 Script B |
| **Script B（Stress）** | `2_Blanton_Script_B.ttl` | `mlucas-avx2 -cpu 0:15` + 5 份 `stress_mem.py` + `stress_ssd.py` + `stress_usb.py` 背景執行（**共 8 個 job**）→ `jobs` 確認 → traffic `ps/init/clear/show/start -u 0` → `while 1` 每輪完整 PMON + margin |
| **Script C（Post-test）** | `3_Blanton_Script_C.ttl` | `kill $(jobs -p)` → PMON + dmesg 再抓一次 → 7 組 AER 再抓一次 → `cat` mlucas / stress_ssd log → traffic `stop` + `report -u 0` → 完成 messagebox |
| **SWB loopback 流量** | `blanton_traffic_linespeed <sub> [-u 0\|1\|all]` | `init`（VLAN 30..137，成對 `cdN`/`cdN+32`）→ `clear` → `start`（`tx 100 length=512`）→ `stop` → `report`（per-pair TX/RX 交叉比對 PASS/FAIL）；另有 `ps`（link/speed）與 `run`（一條龍） |
| **Script A（Pre-test）** | `1_Blanton_Script_A.ttl` V1.2.0 | root 登入 → `date -s` 對時 → 清 job log → **收掉前一輪殘留**（`hw-test-session finish` → `bgctl reset --yes` → `bgctl stop --all` → `bgctl list` 確認清空）→ `hw-test-session start` → **設定風扇轉速** → **等資料面就緒**（`wait_init.ttl`）→ DUT 清單（boot/version/fwutil/syseeprom/ssdhealth/TPM/NVMe）→ BMC enroll + version/status → source bash 工具 → 清/讀 7 組 PCIe AER + `ras-mc-ctl --summary` → `lspci` → margin → PMON → dmesg → **10G/1G 管理網路 ping** → **NFC 基線**（start → 30s → stop → report）→ 100G uplink 設定與狀態 → **一輪流量基線** → **SerDes DSC 基線**（`EN_TX_FIR`）→ `show uptime` |
| **Script B（Stress）** | `2_Blanton_Script_B.ttl` | **V1.1.8 起 `mlucas-avx2 -cpu 0:15` 由 `systemd-run --unit=mlucas-amm`（`Type=exec`、`Restart=always`）啟動，不再是 shell 的 `&` 背景 job** + `bgctl run` 的 `memtester` / SSD / USB 壓力（v1.1.7 起 SSD/USB 的 `--runtime`/`--passes` 讀 `config.ttl` 的 `SSD_RUNTIME`/`SSD_COUNT`、`USB_RUNTIME`/`USB_COUNT`；BMC memtester 不帶次數 = 跑到被停） + BMC DDR（`bmc-manager run memtester`）→ BMC USB net test（探測 cdc_ncm 介面，`systemd-run` 掛 `BMC_USB_RUNTIME` 秒的 ping，V1.1.8 前寫死 4 小時）→ 啟動 mgmt ping 監控 → **啟動 NFC 輪詢** → `jobs` / `systemctl is-active mlucas-amm` / `bgctl list` → traffic（依 `SWB_UNIT`）→ `while 1` 每輪 PMON + `bgctl list`/`jobs`/`systemctl is-active mlucas-amm` + `sleep 60`（**V1.1.4 起 margin 不在迴圈內**；V1.2.0 起等待走 DUT 端 `sleep` 而非 macro 端 `pause`）|
| **Script C（Post-test）** | `3_Blanton_Script_C.ttl` | `kill $(jobs -p)` + **`systemctl stop mlucas-amm`**（systemd unit 不是 shell job，`jobs -p` 抓不到）+ `bgctl stop --all` / `reset` + 停 BMC USB unit、mgmt ping 與 **NFC 輪詢** → PMON + dmesg → 7 組 AER + `ras-mc-ctl` → BMC USB `journalctl` **寫進 `log/bmc_usb_net.log`**（不再印在 console） → `ip -s link show eth0/eth1` → `cat` mlucas log（並 `cp` 進 job 目錄一起帶走）→ **NFC `report`** → traffic `stop` + `report` → **SerDes DSC 收尾**（`EN_TX_FIR`）→ **BER 掃描**（依 `SWB_UNIT`）→ NVMe 健康 → `show reboot-cause` → **margin 掃描**（`EN_Margin`，V1.1.4 由 Script B 移來）→ `uptime` → **job log 複製到 USB（帶時戳）** → `exit` + wait『Script done』→ `hw-test-session finish` |
| **Script 4（Thermal / Safety）** | `4_Blanton_Script_thermal_safety.ttl` | **獨立腳本，不接 A→B→C。** Script A 式的環境建立（登入 / session / 風扇 / `wait_init` / DUT 清單 / BMC / PCIe 清除 / `pcie_bus` / PMON / dmesg）→ **滿載**（`mlucas-avx2 -cpu 0:15`，V1.1.8 起與 Script B 同樣掛成 `mlucas-amm` systemd unit + `blanton_tr518.sh start`）→ `while 1`：PMON + `TH6_SWB0/1_power_readback.sh` + `bgctl list` / `jobs` / `systemctl is-active mlucas-amm`，`pause 60`。**沒有收尾段** —— 中斷後 DUT 仍在 `port cd lb=mac` / `l2 learn off` / `test mode nr=yes`，且 CPU 仍滿載，要手動 `blanton_tr518.sh stop` + `systemctl stop mlucas-amm` |
| **Script 5（Reboot Cycle）** | `5_Blanton_Script_Reboot_Cycle.ttl` | **獨立腳本，不接 A→B→C。** `while 1`：登入 → `sudo -i` → 對時 → 風扇 → **Check Pt1~Pt13**（DUT/BMC info、mgmt ping、NFC、SSD、USB、BMC USB、port status + 15s traffic、BER、NVMe、platform data、dmesg i2c、PCIe error counters）→ `show uptime` → `reboot` → `wait "Booting in blind mode"`。`cnt_cycle` 每輪 +1 印在標頭。**沒有結束條件** —— 要停就關掉 Tera Term 的 macro。**尚未上機驗證** |
| **SWB loopback 流量** | `blanton_traffic_linespeed <sub> [-u 0\|1\|all]` | `init`（VLAN 30..137，成對 `cdN`/`cdN+32`）→ `clear` → `start`（`tx 200 length=324 PatternRandom=yes`，v0.7.0 起）→ `stop` → `report`（per-pair TX/RX 交叉比對 PASS/FAIL）；另有 `ps`（link/speed）與 `run`（一條龍）。**V0.6.0 起含 100G uplink `ce0`**（VLAN 138）：它沒有 loopback 對象，靠 **ingress mirror 打回自己**維持循環，`report` 最後一列就是它，底下再接一份跨 unit summary |
| **FPGA 暫存器存取** | `cb_fpga <fn> <addr> [data]`、`fpga_rescan` | pcimem 打 `resource0` + BAR 相對 offset，32-bit word；BDF 於 source 時自動偵測；`pmc/icb/swb0/swb1_fpga` 走 VSPI 窗口 |
| **CB I2C / PMBus** | `cb_i2c_init/scan/read/write`、`cb_pmbus_read/write/linear16` | FPGA F3 OpenCores master，**讀用 Repeated START**（SMBus/PMBus 裝置必需） |
| **ICB / PDB 存取** | `vi2c_init/scan/read/write`、`vi2c_scan_all` | CB F3 VI2C proxy，~3.3 ms/reg，取代 VSPI 的 ~18 ms/reg（後者會踩 SMBus 25–35 ms timeout） |
| **溫度** | `temp_cb` / `temp_icb` / `temp_all` | TMP75（12-bit 左靠齊 ×0.0625）、TMP432（含 RANGE bit 的 −64 偏移、remote1/2） |
| **電源資料** | `pwr_data` / `pwr_data_pdb` / `pwr_pdb_id` | SWB VRM 全軌 Vin/Vout/Iout/Temp 對齊表；MP29816 解析度**執行期從 `MFR_VOUT_SCALE_LOOP` 讀**，不寫死 |
| **電壓 Margin** | `margin_init/status/set/apply_profile/save` + `*_all.sh` | 9 顆 LTC2980（CB CONN13、SWB0/1 CONN13~16）批次 high/low margin 與狀態掃描 |
| **電壓 Margin** | `margin_init/status/set/apply_profile/save` + `*_all.sh` | 9 顆 LTC2980（CB CONN13、SWB0/1 CONN13~16）批次 high/low margin 與狀態掃描。`VNOM` 為 Blanton 實測中位數（2026-08-30）；SWB 的 profile 是 per-CONN，套錯 CONN 會 margin 到錯的軌且不報錯。v2.6.0 起 SWB 路徑真正接上共用 cb_i2c 後端，並有 `margin_swb_info/probe/scan/reset/sem` 除錯包裝 |
| **Multiphase VRM margin** | `blanton_multiphase_margin.sh {high3\|low3\|comboA\|comboB\|save} [-u 0\|1\|all]` | 兩片 SWB 的多相控制器（**不是** `margin.sh` 管的 LTC2980），走原生 i2c bus：SWB0 = `/dev/i2c-13`+`-15`、SWB1 = `-14`+`-16`。每片 19 條軌、共 38 條，逐條印 `SWB0_0V9_ANLG0 - 0.930V Configure Done`。`save` 沒有 per-rail 對應，只印 `Multiphase Save All`。⚠️ `save` 是 `STORE_USER_ALL`（0x15，TH6 core 用 0x17）**永久寫 NVM**；⚠️ 與 `margin.sh` 從兩側摸同一批軌，**不可同時用** |
| **Margin 寫 NVM** | `margin_save` / `margin_save all` / `margin_save blanton` | ⚠️ 永久寫入。`0x15` 送 PMBus **send-byte**（不帶 data byte）。`all` = 依 `settings/` 走 9 顆、跑完還原原本載入的板子；`blanton` = 本平台捷徑，18 顆全走原生 i2c bus（`MARGIN_BLANTON_STORE` 表），不需 `margin_init`。每筆之間 `MARGIN_STORE_SETTLE`（0.5s），工具**不 poll busy bit** |
| **管理網路 ping** | `mgmt_ping_monitor.sh {start\|stop\|status\|fg\|tail\|clear\|summary}` | 一輪 = 10G leg + 1G leg，各自 `ip address/route replace` 後 `ping -I <if>` 打自己的對端；兩張卡都保持 up。每 leg 記 `ip -s link show` 與該卡的 TX/RX packet delta，另出一行可 grep 的 `RESULT` |
| **BMC 監控** | `bmc_monitor.sh {start\|stop\|status\|fg\|tail\|clear}` | 由 host 端 `bmc-manager run` 週期取樣 `free -m`，另加一組 **I2C 寫入/讀回圖樣測試**（bus 1、addr 0x41、offset 0x00C0，寫 `55AA55AA` 讀回、再寫 `AA55AA55` 讀回）。B 啟動、C 停止並 `cat log/bmc_poll.log` |
| **BMC DDR 壓力** | `bmc_monitor_ddr.sh` | ⚠️ **已停用** —— V1.1.9 起 B/C 內的註解區塊已刪除，改由 `bgctl run bmc-manager run memtester` 取代。檔案保留未刪 |
| **SerDes DSC 擷取** | `bcm_dsc_scan.sh [-u 0\|1] [-f <name>] [-F] [-n] [-C]` + `bcm_dsc_parse.sh -i <log> -o <prefix>` | `bcmcmd -n <unit> -c "dsh -c 'phydiag <port> dsc'"` 掃全清單（1 個 100G + 445 個 200G port）× 2 unit，raw log 寫進 `<script_dir>/log` 再 `cp` 到 `/host/hw-eval/jobs`。`-f` 支援 `%u` / `%t`；沒帶 `%u` 時自動插 `_u0`/`_u1`。成功與否**不看 `bcmcmd` 的 exit code**，改比對 `SERDES DISPLAY DIAG DATA END` 數量 + 實際迭代筆數，結尾印 `### DSC_SCAN_DONE rc=<n>`。parse 端輸出 `_lane.csv`（每 lane：TXEQ/RXFFE/DFE/EYE/SNR）與 `_pm.csv`（每 pm_id：溫度/PLL/lane 數/統計）。**由 `EN_TX_FIR` 控制，預設關** |
| **100G PRBS** | `port_prbs_monitor.sh {start [both\|a\|b]\|stop\|status\|report\|clear}` | 兩個 uplink 各一個 worker，可同時或單獨跑。setup（`lpmode off` → `prbs set` → `prbsstat STArt`）→ 週期 `prbs get`（判定）+ `prbsstat Ber`（只記錄）→ teardown（`STOp` + `prbs clear`）。輸出含 `PRBS OK!` 才算 PASS。**⚠️ V1.1.9 起 A/B/C 內的註解呼叫已刪除，只能手動跑** |
| **SerDes BER 掃描** | `blanton_ber.sh {init\|clear\|start\|stop\|report} [-u 0\|1\|all]` | 全機每個對接 port 的 PRBS BER：`prbs set p=3` + `prbs get`（確認每條 lane 都鎖上）→ `prbsstat STArt Interval=30` →（等一個 interval）→ `prbsstat Ber` → `STOp` → `prbs clear`。`report` 一列一條 lane，**BER < 1e-6 才 PASS**，最後跨 unit 的 summary 帶最差 lane。⚠️ PRBS 期間 link 顯示 DOWN、不過流量 |
| **TR518 負載** | `blanton_tr518.sh {start\|stop} [-u 0\|1\|all]` | `port cd lb=mac` → `l2 learn off` → `test mode nr=yes` → `tr 518 ... testphase=1`，然後 settle `TR_SETTLE_SEC`（120s）再讓人量功耗。`stop` 只送 `port cd lb=none`（照 `TR518.txt`），L2 學習與 test mode **不會還原**，`TR_RESTORE_*=1` 才會 |
| **PDB / CPB brick** | `pwr_brick.sh show [-r]` | 5 顆 brick 的 Vin / Iin / Vout / Iout / Temp（SWB0 `0x62`/`0x63`、SWB1 `0x60`/`0x61`、CPB `0x26`）。四顆 ADPM12200 **每個量各自一個 PMBus PAGE**（Vin 9、Iin 10、Vout 2、Iout 14、Temp 18），讀之前一定要先寫 PAGE —— `blanton_pwr_data.sh` 完全沒寫，所以整張 PDB 表都是 NA。換算用手冊 DIRECT 公式 `X=(1/m)(Y×10⁻ᴿ−b)`。每個值重讀到通過三道檢查為止（非 `0xFFFF`、非 `0x0000`、落在合理範圍）—— 這條匯流排**只壞高位元組**，`11.98 V` 會變成 `32.00 V`，全一過濾擋不住 |
| **SWB 軌功耗** | `TH6_SWB{0,1}_power_readback.sh` | 讀 `show platform voltage/current` **各一次**，19 條軌 V×I 與總功耗。舊版每軌各讀一次（38 次呼叫、每軌不同時刻），總和是不同瞬間的加總 |
| **NFC 讀取輪詢** | `nfc_polling.sh {start\|stop\|status\|tail\|report\|clear\|fg}` | 背景重複跑 `blantons_nfc_validate.py`，每輪追加一行機器可讀的 `RESULT=`（PASS/FAIL 取自工具自己的摘要行，兩者皆無則 **ERROR**，與 FAIL 分開計數）。`start` 會先清空 log；`report` **只讀 log，polling 中隨時可跑**，並標示 `RUNNING` 免得快照被當最終結果。`tail` **不 follow** |
| **USB 目標偵測** | `usb_target.sh [-o dev\|mnt\|both\|id] [-n] [-r sec]` | 找出插入的 USB 儲存裝置，排除 `/` 與 `/host` 的底層碟（本平台可能從 USB DOM 開機），多顆時拒絕猜；掛載時會驗證真的可寫 |
| **打包交付** | `publish/publish.sh [-v Ver] [-f] [-z] [-n]` | 版號讀 Script A 檔頭，複製成 `publish/Script_ABC_Blanton_<Ver>/`，排除 `*.log`，可另出 zip |
---
@@ -291,14 +414,25 @@ PROFILE_CHANNELS=( "0:high:8" "1:low:8" ... ) # "channel:operation:change_perc
Script A ── logopen Logs/Blanton_Margin_<ts>.log ──┐ (之後所有畫面都進這個檔)
│ │
├─ 登入 admin → sudo -i → root@sonic:~# │
├─ date -s "<host 時間>" ← 讓 DUT 時戳可對照 │
├─ date -s "<host 時間>" ← 讓 DUT 時戳可對照
├─ rm /host/hw-eval/jobs/* ← 清掉上一輪的 job log
├─ hw-test-session finish / bgctl reset / stop --all / list (收前一輪)
├─ hw-test-session start / log / status
├─ 風扇：max31790 unbind→sleep→bind（18-0020 與 25-0020 各一次）
│ → fan-speed-control.sh <FAN_SPEED> → 回答 y 確認 │
├─ source 6 個 bash 工具（函數進 shell） │
│ └ 此時 blanton_fpga_pcimem.sh 印出 [INFO] CB FPGA BDF = ...（自動偵測結果）
├─ AER 基線：7 組 EP+RP 的 correctable/nonfatal/fatal
├─ lspci -tvvv / -vv ← 拓樸 + link speed/width
├─ margin_status_all ← 9 顆 LTC2980 × 16ch 的 Vout 與偏差%
├─ show platform × 9 ← fan/temp/psu/voltage/current/ssdhealth/leak status/leak channels
└─ dmesg | grep error/fail/warning
├─ dmesg -T（合併 error 正則 + i2c 過濾）→ dmesg -C 清空 ← C 只會看到 soak 期間新產生的
├─ mgmt ping：start → pause 45 → stop → cat log ← 10G/1G 各一輪
├─ 100G uplink：lpmode off → 兩埠 startup → config save → show interfaces status
├─ 一輪流量基線：ps → init → clear → show → start → stop → report
└─ show uptime
（最前面還有 wait_init.ttl：輪詢 show platform temperature 直到不再回報
"Thermal Not detected"，避免 pmon 還沒起來就抓基線）
▼
[messagebox "Start Script B"] ← 人工確認後手動跑 B
│
@@ -306,8 +440,11 @@ Script A ── logopen Logs/Blanton_Margin_<ts>.log ──┐ (之後所有畫
Script B ── 同一個 log 檔續寫（logwrite 分隔線）
├─ 背景程序：mlucas-avx2(CPU) ×1, stress_mem ×5, stress_ssd, stress_usb → 共 8 個 job
│ （stress_hhmd / stress_pcie 已於 2026-08-17 移除，見 Status 表 ScriptB #5/#7 "KC Remove"）
├─ jobs ← 確認全部起來了
├─ traffic: ps → init → clear → (pause 3) → show → start （unit 0，VLAN 30..137 loopback）
├─ bgctl run: memtester 1G / qfx5252-stress-ssd / qfx5252-stress-usb
├─ BMC: bmc-manager run memtester（DDR）、cdc_ncm 介面探測 + systemd-run 4hr ping（USB）
├─ mgmt_ping_monitor.sh start
├─ jobs / bgctl list ← 確認全部起來了
├─ traffic: ps → init → clear → (pause 15) → show → start （unit 0 與 1，VLAN 30..137 loopback）
└─ while 1: setup_pmon（9 項）→ margin_status_all （soak 期間持續取樣）
▼
[測試員 Ctrl-C / 停止 macro，接著跑 C]
@@ -317,8 +454,15 @@ Script C
├─ kill $(jobs -p) ← 收掉所有背景壓力
├─ show platform × 9 + dmesg ← 收工快照
├─ AER 再抓一次 ← 與 Script A 基線相減 = 本輪新增錯誤
├─ cat mlucas_amm_log / log.stress_ssd ← 壓力程式自身的 pass/fail
└─ traffic: stop → report ← per-pair TX/RX 交叉比對，PASS/FAIL/NA（exit 2 = 有 FAIL/NA）
├─ bgctl stop --all / reset、systemctl stop BMC USB unit、mgmt ping stop
├─ journalctl BMC USB unit、ip -s link show eth0/eth1、ras-mc-ctl --summary
├─ cat mlucas_amm_log ← CPU 壓力程式自身的 pass/fail
├─ nvme smart-log / smartctl -x /dev/nvme0
├─ traffic: stop → report ← per-pair TX/RX 交叉比對，PASS/FAIL/NA（exit 2 = 有 FAIL/NA）
├─ show reboot-cause / show uptime ← soak 期間有沒有意外重開，一眼看得到
├─ usb_target.sh -o dev → sync → mount <dev> /mnt/usb
├─ cp bmc_poll.log / mgmt_ping.log → jobs/，再 cp -r jobs/ /mnt/usb/jobs-<YYYYmmdd>_<HHMM>
└─ hw-test-session finish
▼
[messagebox "GOOD JOB! Test Case DONE"] → 人工檢查 log
```
@@ -343,6 +487,8 @@ pwr_data
1. **A → B → C 必須依序跑，且 B 之後才能跑 C。** Script B 的背景 job 只存在於那個 shell session，
Script C 的 `kill $(jobs -p)` 依賴同一個 session；中途斷線就得手動收程序。
V1.1.8 起 `mlucas-amm` 例外 —— 它是 systemd transient unit，**跨 session 存活**，
所以 Script C 必須另外 `systemctl stop mlucas-amm`（見第 17 條）。
2. **A / B / C 共用同一個 log 檔**：只有 Script A `logopen`，B / C 用 `logwrite` 續寫分隔線。
跑 B/C 前若關掉了 Tera Term，log 就斷了。
3. **PCIe AER 的判定是「差值」不是「絕對值」**：Script A 抓基線、Script C 抓結果，
@@ -356,6 +502,8 @@ pwr_data
只吃 Sr；只有純暫存器裝置兩種都行。
7. **`margin_save`（`STORE_USER_ALL`）會永久寫進 NVM**，斷電保留。測試流程中**絕不執行**，
以免覆蓋客戶出廠 config。`margin.sh` 的 auto-enable 只改 RAM（`ON_OFF_CONFIG`），斷電復原。
`margin_save all` / `margin_save blanton`（v2.7.0）一次對 9 顆 LTC2980（18 個 LTC2977）
下同一道命令，風險同性質但範圍是全機；命令本身是 PMBus send-byte（`0x15`，不帶 data byte）。
8. **操作硬體電壓有損壞 DUT 的風險**：套 profile 前先確認該軌 OV/UV limit 與 servo DAC 注入電阻
有 populate（本板部分 margin 電阻標 PROTO，沒 populate 的軌電壓不會動）。
9. **`ARB_LOST` 不等於裝置存在**：`vi2c_scan` 只看 `RX_ACK`，仲裁失敗會被誤報成「有裝置」。
@@ -367,10 +515,62 @@ pwr_data
`vlan create` 的 `Entry exists`（重跑 init）與 `vlan remove` 的 `not found`（init 前先 stop）
當良性情況分開計數。另外 `bcmcmd` 一律以 `</dev/null` 執行 ——
否則它會吃掉 while 迴圈的 stdin，導致**只有第一個 VLAN 被設定**（V0.3.1 修的 bug）。
**2026-09-07 `bcm_dsc_scan.sh` 又踩了同一個坑**（port 清單走 stdin，445 個 port 只掃了 1 個），
而且因為 `### PORT` marker 與 dsc 區塊數量一起變少，原本的比對檢查完全看不出來、`rc=0`。
修法：迴圈改讀 fd 3（`done 3< "$PORTFILE"`）+ `bcmcmd ... < /dev/null`，再加一道
「實際迭代筆數 == 清單筆數」的獨立檢查。**寫任何餵檔案給 `while` 又在裡面呼叫 `bcmcmd` 的迴圈，
都要假設它會讀 stdin；而且完整性檢查不能只比對兩個會一起變少的數字。**
11. **DUT 密碼不得進 git**：`1_Blanton_Script_A.ttl` 目前的 `sendln "YourPaSsWoRd"` 是 placeholder，
實際帳密必須放 `secret/config_secret.ttl`（gitignored）並由 `config.ttl` include。
12. **客戶 NDA**：`docs/` 內含客戶 FPGA 規格與 schematic 衍生資訊，**本 repo 只推 NAS + Gitea，
12. **`.sh` / `.conf` 必須是 LF**：CRLF 的 shell script 在 SONiC 上直接掛
（`-bash: $'\r': command not found` + `syntax error near unexpected token`），
`settings/*.conf` 則因為是被 `source` 的，未加引號的賦值會變成 `"6\r"`（安靜地壞掉）。
`.gitattributes` 已把 `*.sh` `*.conf` `*.py` `*.txt` `*.md` 釘成 LF、`*.ttl` 維持 CRLF。
⚠️ 但 `.gitattributes` **不會回頭重寫既有工作區檔案** —— 早於它 clone 出來的目錄，
需 `git rm --cached -r . && git reset --hard` 或刪掉目錄重新 checkout 才會生效，
而且 `git status` 乾淨**不代表**磁碟上是 LF（`--renormalize` 只在進 index 的路上轉換）。
13. **`bmc_monitor*.sh` / `mgmt_ping_monitor.sh` 需要執行權**：它們是本專案「被執行」而非被 `source` 的腳本，
而 `do_start` 內部是 `setsid "$SCRIPT_PATH" __daemon`，**即使用 `bash x.sh start` 呼叫
也仍需 exec bit**。git 記錄為 `100644`，且 Windows → 隨身碟 → DUT 的路徑無法攜帶權限位元，
所以佈署後要先 `chmod +x ~/Blanton_Script/bmc_monitor*.sh`，否則 Script B 的 start 會
`Permission denied`、Script C 的 `cat` 撲空（BMC 段全空但不會報錯）。
14. **TTL 的 `timeout` 是全域的，設了就要還原**：`timeout = N` 之後**每一個** `wait` 都被限制在 N 秒，
逾時的 `wait` 會直接返回而沒吃到 prompt，於是下一個指令在前一個還沒跑完就送出，之後整輪錯開一拍。
`wait_init.ttl` 設 60 後還原 0；Script B 的 cdc_ncm 探測設 15，成功路徑在 `endif` 之後還原、
跳過路徑在 `:skip_ping` 還原（兩處各一次）。
Script 5 抄了同一段，但它的 ping 區塊要 `wait` 一個 `sleep 10` —— DUT 一忙就逼近 15 s 上限，
所以**還原點提前到 `if` 之前**：分支之前還原，一行就涵蓋兩條路徑，`:skip_ping` 的那行留作備援。
加新的 `timeout` 時務必配一個 `timeout = 0`；**抄有 `goto` 的段落時連 `:label` 一起抄** ——
標籤沒定義 Tera Term 不會在載入時報錯，要真的跳進那條分支才會彈錯誤視窗停住整輪
（Script 5 原本就漏了 `:skip_ping`，只有抓不到 NCM 介面時才會發作，已補）。
15. **兩張管理網卡同網段時會 ARP flux**：`mgmt_ping_monitor.sh` 讓 eth0/eth1 同時 up，若兩者在同一個
/24（本專案預設 `192.168.1.99` / `.101`），對端 ARP 可能由任一張卡回應，回包落在沒送封包的那張，
量到的數字不能歸屬。`ARP_STRICT=1` 會設 `arp_ignore=1` / `arp_announce=2` 擋掉；
另外每個 leg 的 `RESULT` 行帶 `nic_tx` / `nic_rx`（該卡自己的 packet delta），
**ping 成功但 `nic_tx` 接近 0 就代表封包從另一張卡出去了**。兩張卡在不同網段時可設 0。
16. **客戶 NDA**：`docs/` 內含客戶 FPGA 規格與 schematic 衍生資訊，**本 repo 只推 NAS + Gitea，
絕不推 GitHub**。
17. **改用 `systemd-run` 起壓力工作，就要自己補停的那一行。** `utils/kill_all_process.ttl` 的內容
只有 `kill $(jobs -p)`，而 systemd unit 不是 shell job，它抓不到。V1.1.8 把 `mlucas-avx2`
搬到 `mlucas-amm` unit（好處：掉線不會停、`jobs` 看不見的問題消失、`Restart=always` 會自動拉回），
代價是 Script C 少了那行 `systemctl stop` 就會讓 CPU 滿載燒進收工量測與下一輪測試 ——
而 `show interfaces status` 之類的檢查完全看不出來。目前 `mlucas-amm` 與
`qfx5252-bmc-usb-net-test` 兩個 unit 都已在 Script C 收掉。
⚠️ **`4_Blanton_Script_thermal_safety.ttl` 用同一個 `mlucas-amm` unit，但它沒有收尾段**，
所以那行 `systemctl stop mlucas-amm` 必須由測試員手動下 —— 這是 Script 4 目前
唯一一個「不下就會延續到下一輪」的負載。
18. **`pause` 停的是 macro，`sleep` 停的是 DUT。** V1.2.0 起 A/B/C 的等待一律改成
`sendln "sleep N"` + `wait prompt_sonic_root`。`pause N` 期間 macro 不理會 DUT，shell 是閒著的，
等於用猜的估上一個指令要跑多久 —— DUT 一忙就會提早往下送指令；改成 DUT 端 `sleep` 之後，
prompt 回來才繼續，兩邊不可能走散，而且這段等待會帶時戳進 log，事後看得出哪一輪跑久了。
⚠️ **Script 4 與 Script 5 尚未轉換，仍在用 `pause`**；B/C 開頭的 `pause 1` 也保留
（它在登入前執行，沒有 prompt 可等）。
19. **`config.ttl` 少一個變數會讓 macro 當場中止**，不是當成 0。V1.1.8 新增 `EN_timestamp`
（Script A `logopen` 的第 5 個參數）與 `BMC_USB_RUNTIME`（Script B 的 ping unit）；
V1.2.0 再加 `EN_TX_FIR`（A/C 的 DSC 掃描與 C 的四行 `cp`，預設 0）。
只更新 `.ttl` 卻沿用舊的 `config.ttl`，Script A 會停在 `logopen` 那一行。
另外 **時間戳的「格式」不在 macro 裡** —— 它在 Tera Term 的
Setup → Additional settings → Log，存在那台電腦的 `TERATERM.INI`，會跟著 PC 而不是跟著腳本走。
---
@@ -383,7 +583,7 @@ pwr_data
| **客戶機密文件** | `docs/` 內 FPGA 規格（docx/xlsx/md）屬客戶 NDA 範圍；schematic 原始檔（`*.DSN`）一律 gitignore，不進 repo |
| **Remote 限制** | 只推私有 remote：`nas`（`git.et-wen.com:51222`）+ `gitea`（`etgit.et-wen.com`）。**不設 GitHub `origin`** |
| **測試 log** | `logs/*.log` 含 DUT 序號、MAC、韌體版本等可識別資訊 → gitignore，只保留目錄結構（`.gitkeep`） |
| **破壞性硬體指令** | `margin_save` / `STORE_USER_ALL` 為永久 NVM 寫入，工具預設不呼叫；批次腳本 `margin_save_all.sh` 在 README 與腳本頂端都有警語 |
| **破壞性硬體指令** | `margin_save` / `margin_save all` / `margin_save blanton` / `STORE_USER_ALL` 為永久 NVM 寫入，工具預設不呼叫；`margin_save all` 與批次腳本 `margin_save_all.sh` 在 README 與程式頂端都有警語 |
| **root 權限** | 全流程在 `root@sonic:~#` 下執行（pcimem / i2c 需要）；腳本不留任何 `chmod 777` 或放寬權限的動作 |
| **For_AI/** | AI 協作素材（截圖、草稿筆記）整個資料夾 gitignore，避免不小心把客戶圖面帶進 repo |
@@ -404,6 +604,9 @@ cp secret/config_secret.ttl.example secret/config_secret.ttl
# ── 2. DUT 端：部署 bash 工具庫 ─────────────────────────────
scp -r src/Script_ABC_Blanton/Blanton_Script admin@<DUT_IP>:~/
# 佈署後務必補執行權（Windows/隨身碟路徑帶不動 exec bit）：
ssh admin@<DUT_IP> 'chmod +x ~/Blanton_Script/bmc_monitor*.sh'
# 若曾在舊工作區編輯過，先確認沒有 CRLF：grep -rlU $'\r' ~/Blanton_Script
ssh admin@<DUT_IP> 'sudo -i'
# （現場無網路時改用 USB 隨身碟複製到 ~/Blanton_Script）
@@ -439,6 +642,19 @@ lspci -Dnn # 對照 ARCHITECTURE.md 的 PCIe 拓樸表
8. 檢查 Logs\Blanton_Margin_<ts>.log
```
**打包交付：**
```bash
./publish/publish.sh # 版號讀 Script A 檔頭 → publish/Script_ABC_Blanton_V1.0.3/
./publish/publish.sh -z # 另外產出同名 .zip
./publish/publish.sh -n # dry run，只印會做什麼
./publish/publish.sh -f # 覆蓋既有輸出資料夾
```
版號**不是參數而是從 Script A 的 `; Version : Vx.y.z` 讀出來的**，所以資料夾名不可能跟
測試員打開 macro 看到的版本不一致。要出新版就先改 Script A 檔頭再跑。
輸出會排除 `*.log`（測試 log 含 DUT 序號，不隨交付外流），但保留空的 `logs/` 供 `logopen` 寫入。
> 註：本專案非 .NET / Blazor / EC2 架構，`aws-ec2-deploy` 與 `vbox-run-deploy` 兩份部署指南不適用，已跳過。
---
@@ -493,19 +709,24 @@ margin status、全部 VRM 軌的 Vin/Vout/Iout/Temp、CB + ICB 溫感讀值，
**目標：** 壓力程序起得來、起不來看得出來，soak 迴圈有時戳、可控週期。
**包含：**
- [ ] 部署 `~/hammer/tools/` 前置檢查：新增 `utils/check_hammer_tools.ttl`
（`ls -l ~/hammer/tools/` + `ls ~/hammer/tools/amd/mlucas-avx2`），缺檔就別往下跑
- [ ] 前置檢查：`~/hammer/tools/amd/mlucas-avx2` 仍是唯一還依賴 hammer 的項目，缺檔就別往下跑
- [ ] 壓力程序 log 加時戳，避免多輪覆蓋：
`mlucas_amm_log` → `~/logs/mlucas_amm_log_$(date +%Y%m%d-%H%M%S).log`（Status 表 ScriptB #2 的既定寫法）
- [ ] `jobs` 之後加驗證：期望 **8** 個背景 job（1 mlucas + 5 mem + ssd + usb），
數量不符時 `messagebox` 提示
（`stress_hhmd` / `stress_pcie` 已於 2026-08-17 由 KC 移除，原本的 10 改為 8）
- [x] 壓力層改用平台的 `bgctl`（`memtester` / `qfx5252-stress-ssd` / `qfx5252-stress-usb`），
取代 `~/hammer/tools/stress_*.py`；Script B 以 `jobs` + `bgctl list` 兩者並列確認
- [ ] `bgctl list` 之後加數量驗證，不符時 `messagebox` 提示（目前只印出來給人看）
**← V1.0.10 起 `bgctl list` + `jobs` 改為每輪都印，中途死掉的 job 看得到，但仍要靠人眼比對**
- [ ] soak 迴圈改為「每輪先 `date`、跑完 `pause <間隔>`」，
把 `EN_LoopInterval`（預設 600 秒 = 10 min）放進 `config.ttl`，兌現 Status 表的「Get data every 10mins」
**← 目前 `while 1` 仍無 `pause`，實際間隔取決於指令執行時間，不是 10 分鐘**
**← V1.0.10 已補上 `pause 60`（迴圈不再全速空轉），但 60 秒是寫死的、也還沒有每輪 `date`；
距 Status 表的 10 分鐘仍有差距，故本項未結**
- [x] soak 每輪補 `show platform psustatus` / `voltage` / `current`
—— 迴圈已改為 `include "utils/setup_pmon.ttl"`，九項全收
- [ ] 補 `; ========== CLEAR EVENT ==========`（Status 表 ScriptB #1，Owner: Alan）
- [x] BMC 納入 soak：`bmc_monitor.sh`（`free -m` 取樣）與 `bmc_monitor_ddr.sh`（`memtester`）
由 Script B 啟動、Script C 停止並把 log 併進 master log
- [x] Script A 加開機資訊與就緒等待：`show boot`、BMC `/etc/issue`、`wait_init.ttl`
- [x] Script C 加 `show reboot-cause` / `show uptime`，soak 期間意外重開看得見
**驗收條件：** Script B 啟動後 `jobs` 顯示 8 個 job；連續跑 3 輪，log 內三段各自帶正確時戳且間隔 ≈10 min；
故意把 `~/hammer` 改名，Script B 會在前置檢查就停下並提示。
@@ -530,14 +751,15 @@ margin status、全部 VRM 軌的 Vin/Vout/Iout/Temp、CB + ICB 溫感讀值，
（取代原規劃的 `utils/show_traffic_counters.ttl`）
- [x] Script B 接上 `ps → init → clear → show → start`、Script C 接上 `stop → report`
- [x] 原始 bcmcmd 指令表留檔：`tools/traffic_loopback_{vlan_setting,start,vlan_remove}.txt`
- [ ] **Script A 的 TRAFFIC-SETUP-STAGE 仍是空區塊** —— 目前流量只在 B/C，A 沒有基線
- [x] **Script A 的流量基線** —— 原本的空區塊已改成完整一輪
（`ps → init → clear → show → start → stop → report`，含 15 秒沉澱）
- [ ] `utils/show_interface_detail.ttl`：`show interface transceiver eeprom/dom`、
`show interface link-training`（Status 表 ScriptC #4，仍 On-Going）
- [ ] `utils/show_tech.ttl`：`show techsupport`（Script C 收工快照，Status 表 ScriptC #4）
- [ ] `config.ttl` 加 `EN_Traffic` 旗標，未接 loopback 線的站點可整段跳過
（現在 B/C 是無條件執行，沒接線會整批 bcmcmd 失敗）
- [ ] 兩支腳本目前都寫死 `-u 0`，另一塊 switch board（unit 1）沒被測到；
工具本身預設是 `TL_UNITS="0 1"`，要決定是照工具預設跑兩塊，還是維持只測 unit 0
- [x] `-u 0` 已從三支腳本移除，全部沿用工具預設 `TL_UNITS="0 1"`，兩塊 switch board 都測到
- [x] 100G uplink 狀態：`show interfaces status Ethernet513,Ethernet514`（A 與 B 各一次）
**驗收條件：** `EN_Traffic=1` 時，Script C 的 `report` 印出 108 對的 TX/RX 表且全 PASS；
拔掉一條 loopback 線重跑，該對顯示 FAIL 或 NA 且 exit code 為 2；`EN_Traffic=0` 時整段不執行且不報錯。
@@ -555,9 +777,13 @@ margin status、全部 VRM 軌的 Vin/Vout/Iout/Temp、CB + ICB 溫感讀值，
UE > 0 或 fatal/nonfatal > 0 直接標 FAIL
- [ ] Margin 表解析：把 9 顆 × 16ch 的 Vout / 偏差% 收成 CSV，標出超出 ±(profile 設定值 + 容差) 的軌
- [ ] 溫度 / 風扇 / 電源趨勢：soak 期間逐輪取樣 → CSV（可直接畫圖）
- [ ] Stress 判定：`mlucas_amm_log` 與 `log.stress_ssd` 的錯誤關鍵字掃描
- [ ] Stress 判定：`mlucas_amm_log` 與 `bgctl` 各工作的 log
（`/host/hw-eval/.../qfx5252-stress-{ssd,usb}.log`）的錯誤關鍵字掃描
- [ ] Traffic 判定：**直接複用 `tools/bcm_mibpair_report_V1.1.0.py`**（它已能吃 console log 的
`show c` 段落並輸出 PASS/FAIL），不要重寫一套解析
- [ ] 管理網路判定：抓 `mgmt_ping_monitor.sh` 的 `RESULT` 行（已是單行可 grep 格式），
並檢查 `nic_tx`/`nic_rx` 不為 0 —— 否則 PASS 也不能歸屬到那張卡
- [ ] NVMe / EDAC：`nvme smart-log`、`smartctl -x`、`ras-mc-ctl --summary` 的前後差值
- [ ] 產出 `Logs/<run>_summary.md`：一頁 PASS/FAIL + 每個子系統一行結論
**驗收條件：** 拿一份既有 log（如 `Blanton_Margin_20260814-164122.log`）跑解析器，
@@ -570,15 +796,15 @@ margin status、全部 VRM 軌的 Vin/Vout/Iout/Temp、CB + ICB 溫感讀值，
**目標：** 產出可直接交給現場測試員（或客戶）的一包，含操作手冊，不需要看原始碼。
**包含：**
- [ ] `tools/publish.sh`：把 `src/Script_ABC_Blanton/` + 空 `Logs/` + `secret/*.example`
打包成 `publish/Blanton_Script_ABC_v<ver>_<YYYYMMDD>/` 與同名 zip（比照
既有的 `Blanton_Script_ABC_v1.0_20251229` 命名）
- [x] `publish/publish.sh`：把 `src/Script_ABC_Blanton/` 打包成
`publish/Script_ABC_Blanton_<Ver>/`（`-z` 另出 zip）。版號讀 Script A 檔頭，
排除 `*.log` 但保留空的 `logs/`。工具本身進 git，產出被 gitignore
- [ ] `README.md`（現場用）：Tera Term 設定、A→B→C 操作順序、常見錯誤（BDF 不符、
margin 掃不到、hammer 工具缺檔）與對應處理
- [ ] `CHANGELOG.md`：延續三支腳本頂端的 Version History，集中成一份
- [ ] 三支腳本的 header 版號與 `CHANGELOG.md` 對齊，`config.ttl` 加 `script_version` 並寫進 log 開頭
- [ ] `docs/TTL_Script_Blanton_Status_*.xlsx` 更新為全 OK，或把剩餘項目移進 Future Extensions
- [ ] 打 git tag `v1.1.0`，push `nas` + `gitea`
- [x] 打 git tag，push `nas` + `gitea`（已至 `V1.2.0`；`publish/` 依 Script A 檔頭版號打包）
**驗收條件：** 從 zip 解壓到一台乾淨的測試 NB，照 README 操作，不看原始碼就能完成一輪 A→B→C
並產出 summary；`publish/` 內容與 git tag 一致。
@@ -602,6 +828,110 @@ margin status、全部 VRM 軌的 Vin/Vout/Iout/Temp、CB + ICB 溫感讀值，
bash 工具，速度與可靠度都比 serial 好，TTL 只保留開機階段。
- **多 DUT 併行**：多台 DUT 同時 soak 時，Tera Term 每台開一個 macro window；
可考慮改成 Python（`pyserial`）統一排程與集中收 log。
- **與 `LTC2980_Margin_Script` 獨立 repo 的同步機制**：目前 `Blanton_Script/LTC2980_Margin_Script/`
是該 repo 的複本（少了 `ARCHITECTURE.md`/`CLAUDE.md`/`Reference/`，多了兩支 `blanton_*` 後端）。
待評估改用 git submodule 或明確的 vendored 同步腳本。
- ✅ **margin 子專案的重複檔** —— v2.6.0 已移除內含的 `blanton_cb_i2c.sh` /
`blanton_fpga_pcimem.sh` 複本，改由 `_swb_find_backend` 往上層找共用版，漂移風險解除。
與獨立 repo `LTC2980_Margin_Script` 的同步機制（submodule 或 vendored 腳本）仍待評估。
- **`Ref/margin_command_trace.md` 需重新產生**：SWB 章節的 1223 條 `cb_pmbus_*` 指令是依
修正前的通道／位址展開的（其中 487 條用到已不存在的 `0x5D`/`0x5F`/`0x63`/`0x65`），
文件已加過期警告但內文未動。第 1~4 章不受影響。
- **`wait_init.ttl` 沒有逾時出口**：若 pmon 一直起不來，`result` 既非 1 也非 2，迴圈會無限重試，
Script A 既不往下走也不報錯。可加最大重試次數 + `messagebox` 提示。
- **腳本的執行權**：`mgmt_ping_monitor.sh` 與 `bmc_monitor.sh`（以及已停用的 `bmc_monitor_ddr.sh`）需人工 `chmod +x`。
可在 Script B 起它之前補一行（比照既有的 `chmod +x ~/hammer/tools/amd/mlucas-avx2`），或在 publish 時處理。
- **`bmc_monitor_ddr.sh` 已停用**：V1.1.9 起 B/C 內那段註解掉的呼叫已刪除，DDR 壓力由
`bgctl run bmc-manager run memtester` 取代。檔案還留在 repo，待確認不再需要後刪除，或在檔頭標註停用。
（`bmc_monitor.sh` 已於 2026-08-25 重新啟用，並加上 I2C 寫入/讀回圖樣測試。）
- **`rm /host/hw-eval/jobs/*` 清不掉子目錄**：Script A 用的是不帶 `-r` 的 `rm`，但 Script C
是 `cp -r` 那個目錄，代表裡面可能有子目錄。清不乾淨的話，上一輪的 job log 會被當成這輪的一起
複製到 USB。要確認 `bgctl` 的產出結構，必要時改成 `rm -rf .../jobs/*`。
- **100G PRBS 已從 A/B/C 移除**：`port_prbs_monitor.sh` 仍隨包交付、仍可手動執行，但 V1.1.9 起
三支腳本裡那些註解掉的呼叫已整段刪除（連同 Script C 的 `bmc_monitor_ddr.sh` 區塊）。
要接回去得重寫，不是把註解拿掉。啟用時記得 PRBS 期間 link 會顯示 down，`stop` 之後才會回來。
- **DSC 擷取預設是關的**：`EN_TX_FIR = 0`，所以出貨設定不會跑 `bcm_dsc_scan.sh`。
開啟後 Script A 與 Script C 各掃一次、整輪多約 20 分鐘；只要單邊資料可以在腳本裡改成 `-u 0`。
掃描本身是唯讀（`phydiag ... dsc` 不改 SerDes 設定），但**它與 `blanton_ber.sh` /
`blanton_traffic_linespeed` / `blanton_tr518.sh` 一樣都在動同一批 port，不要同時跑**。
- **Script 5（Reboot Cycle）尚未上機驗證**：`5_Blanton_Script_Reboot_Cycle.ttl` 隨 V1.1.7 交付，
但還沒在真 DUT 上跑過一輪完整循環。兩個要現場確認的點：`wait "Booting in blind mode"` 是否
真的在每一版開機訊息裡出現（沒出現就會永遠等下去，而且沒有 `timeout` 保護）；以及每輪重跑
`bmc-first-enroll` 是否安全。**沒有結束條件**，測夠了要自己關掉 macro。
- **`tmp/blanton_reboottest.sh`（bash 版重開循環）也未上機驗證**：不用 Tera Term、由 systemd 在
每次開機跑一輪並自動 `reboot`，登入下 `stop` 才停。整個 `tmp/` 是 gitignored，**不會進交付包** ——
驗證過再搬進 `Blanton_Script/`。未驗證的腳本混進 `Blanton_Script/` 之後，測試員分不出哪支能信。
- **交付包不含 `hammer/`，但 Script B 與 Script 4 都要用它**：V1.1.8 起 `hammer/` 是 gitignored
且被 `publish.sh` 排除（~99 MB 的 mlucas binary，進 git 就永久留在 history）。這是刻意的 ——
binary 由 DUT image 帶 —— 但代表**測試員解開交付包後 `~/hammer` 必須已經在 DUT 上**，
否則 Script B 會在 `chmod +x ~/hammer/tools/amd/mlucas-avx2` 那一行失敗，而且 macro 不會停，
接著的 `systemd-run` 只是起一個立刻失敗又被 `Restart=always` 反覆重拉的 unit。
上機前先 `ls ~/hammer/tools/amd/mlucas-avx2` 確認一次。
- **`mlucas-amm` 的 `~` 依賴 systemd 的環境**：unit 是
`/bin/bash -c '~/hammer/... >> ~/hammer/mlucas_amm_log'`，system service 沒有 `User=` 時 systemd
**不會設 `HOME`**，bash 才退回 passwd 的家目錄（root → `/root`）解出同一條路徑。目前會通，
但那是剛好對上而不是保證；改成絕對路徑 `/root/hammer/...` 就不用賭。**尚未上機驗證。**
- **Script C 的 USB 掛載走 `mount` 而非 `usb_target.sh -o mnt`**：目前是 `-o dev` 取節點再自己
`mount <dev> /mnt/usb`，繞過了工具內建的 `mkdir -p`、exfat/ntfs `modprobe` 與可寫性驗證。
掛載點不存在、檔案系統模組沒載、或媒體唯讀時只會失敗一行，job log 就沒帶出來。
- **風扇確認提示是無限等待**：`wait "Set all configured fan channels to"` 之後才 `sendln "y"`；
若該版 `fan-speed-control.sh` 不再詢問（或字串改了），這個 `wait` 會永遠等下去，Script A 停在那裡
且不報錯。加個 `timeout` + 分支會比較保險（記得還原 `timeout = 0`）。
- ✅ **TR518 已腳本化** —— `blanton_tr518.sh` V1.0.1（2026-08-28）。仍與 `blanton_traffic_linespeed`
互斥（兩者都會動 `port cd` loopback 與 L2 學習），檔頭與 help 都標了。剩下三件事：
`stop` 沒把 `l2 learn` / `test mode` 放回去（照 `TR518.txt` 的定義，旗標可開）；
**`sleep 120` 的方向還沒驗證** —— 若 `tr 518` 的流量是有時限的（參數含 `runtime=1`、
`CheckDataTime=200`），等 120 秒可能量到已經降下來的值，要上機比對 0s / 30s / 120s 三次；
TTL 尚未呼叫它。
- **`--runtime` 是整個 job 的總時限，不是每個 pass 的**：V1.1.7 起由 `config.ttl` 宣告
（`SSD_RUNTIME`/`SSD_COUNT`、`USB_RUNTIME`/`USB_COUNT`，COUNT 直接對應 `--passes`）。
`qfx5252-stress-*` 跑滿 RUNTIME 秒就結束，**`--passes` 不會把它延長**，所以
`RUNTIME=600, COUNT=720` 是 10 分鐘的壓力而不是 120 小時。要跑滿一天就把 RUNTIME 填 `86400`。
**V1.1.8 起出貨預設是 `RUNTIME=3600`（1 小時）**，`BMC_USB_RUNTIME` 則是 `172800`（2 天）——
三個壓力源的長度目前刻意不一致，開跑前要照當次 soak 的時間各自對一次。
壓力提早結束時 Script B 每輪的 `bgctl list` 數量會變少，但**沒有任何東西會主動報警**；
要比 24 小時更久則得加一段重啟 job 的邏輯。
- **BMC USB 的 service log 只剩隨身碟一份**：Script C 把 `journalctl` 導進
`log/bmc_usb_net.log` 再 `cp` 到 job 目錄，**不再印在 master console log**。
那個 `cp` 沒有檢查回傳值（`nfc_polling.log` 檔名打錯那次就是這樣安靜失敗的），
失敗的話這份 log 就完全消失。要嘛在 `cp` 之後補一次 `ls` 驗證，要嘛保留一份
`cat` 到 console。
- **`READ_VIN` / `READ_IIN` 不在 ADPM12200 手冊的 Table 3 裡**：`pwr_brick.sh` 讓它們沿用
Voltage / Current 那兩組係數。50 V 輸入算得出來、數量級也對，但**手冊沒有明說**。要定案
得找 ADI 確認，或找一個能獨立比對輸入電壓的量測點（`READ_VOUT` 就是靠 `show platform
voltage` 的 `PDB_IBC_*` 對上的）。
- **VI2C 沒有硬體號誌**（`vi2c_muxsel` 的 help 自己寫了「VI2C has no SEM_REG」），而平台的
sensor 驅動會週期性讀同一批 PDB 裝置。`pwr_brick.sh` 用「重讀到合理為止」繞過去，但根本
問題沒解：`_vrd` 裡的 `_vwait` 逾時後仍然回傳半成品，呼叫端也沒檢查它的回傳值。修
`blanton_icb_vi2c.sh` 會影響所有走 VI2C 的工具（ICB 溫感、風扇、EEPROM），值得先確認
是不是跟 pmon 競爭再動。
- **`blanton_multiphase_margin.sh` 與 `margin.sh` 沒有互斥機制**：兩支從不同側（原生 i2c vs
LTC2980 PMBus）摸同一批軌，各自都假設自己是唯一的寫入者。目前只靠文件與 help 提醒，
沒有任何執行期檢查。
- **Script 4 沒有收尾段**：`while 1` 之後就是檔案結尾，中斷時 DUT 停在 `port cd lb=mac` /
`l2 learn off` / `test mode nr=yes`，而且 CPU 壓力還在跑。要手動
`blanton_tr518.sh stop` + `systemctl stop mlucas-amm`（V1.1.8 起它是 systemd unit，
關掉 Tera Term 或 `kill $(jobs -p)` 都收不掉），否則下一輪任何測試都在被污染的狀態上開始
（Script A 的 `bgctl reset/stop --all` 收得掉 job，但收不掉 bcm 的 loopback 設定）。
可考慮加一支對應的收尾腳本，或在檔尾用 `messagebox` 提示要下哪些指令。
- **margin 在 soak 期間不再取樣**（V1.1.4）：只剩 Script A 的起始值與 Script C 的結束值。
漂移發生在中間就看不到了。若要恢復，比較好的做法是在 B 的迴圈內每 N 輪才掃一次，
而不是每輪都掃。
- **`blanton_ber.sh` 的 `sleep 30` 與 `BER_INTERVAL` 是兩處要同步改的數字**：Script C 寫死
`sendln "sleep 30"`，腳本預設 `BER_INTERVAL=30`。改一邊沒改另一邊，report 會讀到還沒累積完
一個 interval 的數字，而且不會有任何警告。
- **`ce0` 的 ingress mirror 尚未上機驗證**：`mirror port ce0 Mode=Ingress DestPort=ce0` 這條路是
推論出來的（鏡像複本不受 egress filter 的 source-port knockout 限制），語法取自 DUT 的
`help mirror`，但**還沒證明硬體真的接受 destport == srcport**。驗證方式是隔 10 秒看兩次
`show c | grep POK.ce0`，數字有沒有繼續長 —— 光看 report 的 PASS 分不出來，因為一次性 burst
也是 TX==RX。不通的話備案是 `tr 518 PortList=268`。
- **SWB 的 LTC2977 有兩條路可以到，目前工具兩條都在用**：`cb_pmbus_*`（CB FPGA F3 → pcimem）
是 `margin_init` / `margin_status` / `margin_set` 走的路；原生 i2c bus（Ch+7 = bus 13/14/15/16）
是 `margin_save blanton` 走的路。後者短很多 —— 不需要通道初始化、不需要 pcimem，
單一 `i2cset` 就到。若原生 bus 在這平台夠穩，整個 `TRANSPORT="swb"` 層其實可以退成
「bus 號不同的 i2c 路徑」，`_swb_*`、probe、semaphore、prescale 那整套都能拿掉。
要動之前得先確認：讀取（`margin_status` 的 LINEAR16 word read）是否也同樣可靠，
以及 kernel driver 有沒有搶著存取（`margin_save blanton` 帶 `-f` 就是為了繞過這件事）。
- **`settings/` 裡 SWB0 與 SWB1 是兩份相同的資料**：8 個 `.conf` 中，SWB1 的四個除了 `CHIPS[]` 的
bus 與 `CB_I2C_CH` 之外，net name 與 `VNOM` 與 SWB0 逐欄相同（見 `docs/LTC2980_channel_map.csv`）。
改一邊忘了改另一邊不會有任何警告。可考慮改成「共用 net 定義 + 各自的 transport 覆寫」兩層檔案。
- **Script C 沒有倒出 `mgmt_ping.log`**：C 會 `stop` 管理網路監控並印 `ip -s link show`，
但沒有 `cat ~/Blanton_Script/log/mgmt_ping.log`，所以整個 soak 期間累積的 per-leg `RESULT`
留在 DUT 上、沒進 master log。Script A 那輪基線有 `cat`。
CLAUDE.md
+273 -14
View File
@@ -9,6 +9,37 @@ DUT 端的取數能力由一組 **bash 工具庫** 提供（CB FPGA `pcimem` →
完整架構見 [ARCHITECTURE.md](ARCHITECTURE.md)。
**目前狀態（2026-09-07）**：Script A 為 **V1.2.0**（A 集中記錄所有 TTL 的變更）。涵蓋
PCIe AER / DDR EDAC / PMON+TPM / 電壓 margin（9 顆 LTC2980）/ SWB loopback 線速流量 /
10G+1G 管理網路 ping / BMC DDR 與 USB / NVMe 健康，壓力層走平台的 `bgctl`。
switch unit 數量由 `config.ttl` 的 `SWB_UNIT0` / `SWB_UNIT1` 宣告，風扇轉速由 `FAN_SPEED` 指定
（預設 100 = 全速；soak 是熱測試，散熱不該是變因）。
測試 job log 收在 DUT 的 `/host/hw-eval/jobs/`，Script C 結束時掛好 USB 再帶時戳複製到 `/mnt/usb/`。
100G PRBS（`port_prbs_monitor.sh`）已隨包交付、可手動執行，但 **V1.1.9 起 A/B/C 裡註解掉的呼叫已整段刪除**，
要接回去得重寫（`bmc_monitor_ddr.sh` 在 Script C 的註解區塊同時移除）。
V1.1.9 新增 **SerDes DSC 擷取**：`bcm_dsc_scan.sh`（DUT 端，`phydiag <port> dsc` 掃全機 ~445 port × 2 unit，
約 10 分鐘）由 Script A 與 Script C 各跑一次夾住 soak，`bcm_dsc_parse.sh`（Host 端）把 raw log 轉成
`_lane.csv` / `_pm.csv`。**由 `config.ttl` 的 `EN_TX_FIR` 控制，預設 0（關）** —— 開了整輪測試多 ~20 分鐘。
Script B 的 soak 迴圈每輪印 `bgctl list` + `jobs` + `systemctl is-active mlucas-amm`，並 `sendln "sleep 60"`
（V1.0.10 之前完全沒有間隔；V1.2.0 起 A/B/C 的等待一律改成 DUT 端 `sleep` 而非 macro 端 `pause`）。V1.1.8 起 AMD CPU 壓力（`mlucas-avx2`）由 `systemd-run` 掛成
`mlucas-amm` transient unit（`Restart=always`），不再是 shell 的 `&` 背景 job —— 掉線也不會停，
Script C 用 `systemctl stop mlucas-amm` 收掉並把 log 複製到隨身碟。
V1.1.0 新增全機 SerDes BER 掃描（`blanton_ber.sh`，**Script C 已接**，依 `SWB_UNIT` 分支）、
TR518 負載（`blanton_tr518.sh`，**TTL 尚未接**）、SWB 軌功耗（`TH6_SWB{0,1}_power_readback.sh`），
線速流量也納入 100G `ce0`（VLAN 138，靠 ingress mirror 維持循環）。
Script A 開頭會先收掉前一輪殘留（`hw-test-session finish` + `bgctl reset/stop --all`），
再 `bgctl list` 確認沒有 job 留著佔資源。
NFC tag 讀取由 `nfc_polling.sh` 背景輪詢（A 做基線、B 起、C 停並 report）。
另有 **`4_Blanton_Script_thermal_safety.ttl`**（熱 / 安規，**獨立跑不接 A→B→C**，滿載後每分鐘
取 PMON + 兩片 SWB 的軌功耗；**沒有收尾段**，中斷後要手動 `blanton_tr518.sh stop`）。
以及 **`5_Blanton_Script_Reboot_Cycle.ttl`**（重開機循環，**獨立跑不接 A→B→C**：登入 → 風扇 →
Check Pt1~Pt13 → `reboot` → `wait "Booting in blind mode"`，`cnt_cycle` 每輪遞增，`while 1` 無止境，
要停就關 Tera Term 的 macro）。**尚未上機驗證**。
流程圖：`docs/Blanton_Test_Flow.drawio`。
最後一次發布是 **V1.1.5**；SWB 的 I2C 通道與位址已於 2026-08-19 上機驗證。
margin 的 `VNOM` 已於 2026-08-30 改為 Blanton 實測中位數（144 條軌中 86 條上調 0.8~2.5%）。
交付用 `./publish/publish.sh` 打包。
## 技術棧
- **Host**：Tera Term 5.x TTL macro（`.ttl`），Windows
@@ -19,6 +50,10 @@ DUT 端的取數能力由一組 **bash 工具庫** 提供（CB FPGA `pcimem` →
- **Margin**：LTC2980（= 2 × LTC2977）over PMBus，LINEAR16
- **資料面流量**：`bcmcmd`（Broadcom drivshell）SWB loopback，VLAN 30..137 成對 `cdN`/`cdN+32`，
`tx 100 length=512`；判定讀 ASIC `MIB_TPOK`/`MIB_RPOK` 做 per-pair 雙向交叉比對
- **BMC**：host 端 `bmc-manager run "<cmd>"`，不需對 BMC 開 SSH（繞開其 busybox 工具鏈）
- **背景工作**：平台的 `bgctl run/list/stop --all/reset`；長時間 ping 用 `systemd-run --unit=` 掛 transient unit
- **管理網路**：iproute2（`ip link set` / `address replace` / `route replace ... metric`）+ `ping -I`
- **風扇**：max31790 driver rebind + `fan-speed-control.sh <%>`（轉速讀 `config.ttl` 的 `FAN_SPEED`）
- **判定資料源**：PCIe AER sysfs（`aer_dev_*`）、EDAC sysfs（`dimm_{ce,ue}_count`）、SONiC `show platform *`
- **無編譯步驟**：TTL 與 bash 都直譯執行
@@ -49,25 +84,138 @@ temp_all # CB + ICB 溫感
pwr_data # SWB VRM 全軌
margin_init Blanton_CB_CONN13 && margin_status
# ── 電壓 margin 寫 NVM（⚠️ 永久，測試中絕不執行）─────
margin_save # 只寫當前 margin_init 載入的那顆（2 個 LTC2977）
margin_save all # settings/ 全部 9 顆；跑完自動切回原本載入的那顆
margin_save blanton # Blanton SONiC 捷徑：18 顆全走原生 i2c，不用 margin_init
# 0x15 是 send-byte，不帶 data byte：i2cset -f -y <bus> <addr> 0x15
# bus = FPGA F3 通道 + 7 → Ch6=13, Ch7=14, Ch8=15, Ch9=16（CB 本來就是 bus 4）
# ⚠️ 沒裝滿的機器：改 margin.sh 頂端的 MARGIN_BLANTON_STORE，把沒有的板子註解掉
# ── SWB loopback 流量（bcmcmd，unit 0/1）─────────────
blanton_traffic_linespeed ps -u 0 # 對照線的 link/speed
blanton_traffic_linespeed init -u 0 # VLAN 30..137，cdN <-> cdN+32
blanton_traffic_linespeed clear -u 0 # clear c
blanton_traffic_linespeed start -u 0 -tx 100 -length 512
blanton_traffic_linespeed stop -u 0 # 移除 VLAN 成員（--destroy 連 VLAN 一起砍）
blanton_traffic_linespeed report -u 0 # per-pair TX/RX + PASS/FAIL（exit 2 = 有 FAIL/NA）
blanton_traffic_linespeed run -u 0 # ps → init → clear → start → report 一條龍
blanton_traffic_linespeed init -u 0 -n # -n dry-run：只印要下的 bcmcmd，不碰 DUT
# 不帶 -u 就是預設 TL_UNITS="0 1"，兩塊 switch board 都做（TTL 三支腳本即如此）
blanton_traffic_linespeed ps # 對照線的 link/speed
blanton_traffic_linespeed init # VLAN 30..137，cdN <-> cdN+32
blanton_traffic_linespeed clear # clear c
blanton_traffic_linespeed start -tx 100 -length 512
blanton_traffic_linespeed stop # 移除 VLAN 成員（--destroy 連 VLAN 一起砍）
blanton_traffic_linespeed report # per-pair TX/RX + PASS/FAIL（exit 2 = 有 FAIL/NA）
blanton_traffic_linespeed run # ps → init → clear → start → report 一條龍
blanton_traffic_linespeed init -u 0 # 只做單一 unit 時才需要 -u
blanton_traffic_linespeed init -n # -n dry-run：只印要下的 bcmcmd，不碰 DUT
blanton_traffic_linespeed report -f <log> # 離線重解一份存下來的 console log
# 離線版報表（開發機上跑，選項更多）
python3 tools/bcm_mibpair_report_V1.1.0.py <drivshell.log> -a
# ── 管理網路 ping 監控（需先 chmod +x！）──────────────
chmod +x ~/Blanton_Script/*.sh # 佈署後必做一次
~/Blanton_Script/mgmt_ping_monitor.sh fg # 前景試一輪（約 30 秒），確認 IP/對端/網卡
~/Blanton_Script/mgmt_ping_monitor.sh start # 背景，log/mgmt_ping.log（start 會先清空）
~/Blanton_Script/mgmt_ping_monitor.sh status
~/Blanton_Script/mgmt_ping_monitor.sh stop
~/Blanton_Script/mgmt_ping_monitor.sh summary # 只看每段的 RESULT 行
# ⚠️ tail 子命令是 tail -f，會卡住不返回；TTL 裡要倒 log 請用 cat
# bmc_monitor.sh start/stop # free -m + BMC I2C 寫入/讀回圖樣測試，log/bmc_poll.log
# ⚠️ bmc_monitor_ddr.sh 已停用（DDR 壓力改走 bgctl + bmc-manager），檔案仍在
# ── 100G PRBS（目前 TTL 未啟用，手動測用）────────────
bash ~/Blanton_Script/port_prbs_monitor.sh start # 兩個 port 同時
bash ~/Blanton_Script/port_prbs_monitor.sh start a # 只跑 Ethernet513
bash ~/Blanton_Script/port_prbs_monitor.sh start b # 只跑 Ethernet514
bash ~/Blanton_Script/port_prbs_monitor.sh report # PASS/FAIL 統計（沒跑的顯示 SKIP）
bash ~/Blanton_Script/port_prbs_monitor.sh stop # 收尾會跑 prbsstat STOp + prbs clear
# ⚠️ PRBS 打起來時 link 會顯示 down，這是正常的 —— 所以 start 刻意不印 port status
# ── PDB / CPB power brick 讀值 ──────────────────────
./Blanton_Script/pwr_brick.sh show # Vin/Iin/Vout/Iout/Temp × 5 顆
./Blanton_Script/pwr_brick.sh show -r # 多印 raw word
# 四顆 ADPM12200 每個量各一個 PMBus PAGE：Vin 9 / Iin 10 / Vout 2 / Iout 14 / Temp 18
# CPB.PU37 (0x26) 是不同零件：不寫 PAGE，自己一套換算
# PB_TRIES=1 ... show -r 可看未經重試的原始行為
# ── 多相 VRM margin（原生 i2c，38 條軌）──────────────
./Blanton_Script/blanton_multiphase_margin.sh high3 # 全部 +3%
./Blanton_Script/blanton_multiphase_margin.sh low3 # 全部 -3%
./Blanton_Script/blanton_multiphase_margin.sh comboA # 混合，組合 A
./Blanton_Script/blanton_multiphase_margin.sh comboB # 混合，組合 B
./Blanton_Script/blanton_multiphase_margin.sh save # ⚠️ 永久寫 NVM
# -u 0 / -u 1 單邊（SWB0=i2c-13/15，SWB1=i2c-14/16）；-n 只印指令
# 逐條印 SWB0_0V9_ANLG0 - 0.930V Configure Done；save 只印 Multiphase Save All
# ⚠️ 這不是 margin.sh 管的 LTC2980，兩支摸同一批軌，不要同時用
# ── 全機 SerDes BER（PRBS，期間 link 會顯示 DOWN）────
./Blanton_Script/blanton_ber.sh init # prbs set p=3 + prbs get（檢查每條 lane 鎖定）
./Blanton_Script/blanton_ber.sh start # prbsstat STArt Interval=30
sleep 30 # 至少等一個 interval 再 report
./Blanton_Script/blanton_ber.sh report # 每 lane 一列，BER < 1e-6 才 PASS，最後 summary
./Blanton_Script/blanton_ber.sh stop # prbsstat STOp
./Blanton_Script/blanton_ber.sh clear # prbs clear（會解除 PRBS，要重測得再 init）
# -u 0 / -u 1 單邊；-c 1e-9 換門檻；-F 只列失敗；-f <log> 離線重解
# ⚠️ 不能跟 blanton_traffic_linespeed / blanton_tr518 同時跑（都會接管同一批 port）
# ── SerDes DSC 擷取（TX_FIR / RXFFE / DFE / EYE / SNR）──
./Blanton_Script/bcm_dsc_scan.sh # unit 0+1 全掃，約 10 分鐘
./Blanton_Script/bcm_dsc_scan.sh -u 0 # 只掃一個 unit（時間減半）
./Blanton_Script/bcm_dsc_scan.sh -f my.log -F # 自訂檔名 + 覆蓋
./Blanton_Script/bcm_dsc_scan.sh -n # dry-run，只列要掃的 port
# log: ~/Blanton_Script/log/，掃完自動 cp 到 /host/hw-eval/jobs（-C 可關）
# 檔名沒帶 %u 時會自動插 _u0 / _u1，所以兩個 unit 不會互相覆蓋
# 結尾固定印 "### DSC_SCAN_DONE rc=<n>"；rc=0 才是全部 port 都拿到完整 dump
# ⚠️ 由 TTL 的 EN_TX_FIR 控制，預設 0（關）—— A 與 C 各掃一次，開了整輪多 ~20 分鐘
# ── DSC raw log → CSV（離線解，Host 或 DUT 都可）──────
sh ~/Blanton_Script/bcm_dsc_parse.sh -i blanton_dsc_ScriptA_u0.log -o u0
# 產出 u0_lane.csv（每 lane 一列）+ u0_pm.csv（每 pm_id 一列）
# 純 sh + awk（mawk 相容），欄位靠括號群組順序抓，SDK 改排版不會壞；
# 群組數 != 9 的列標成 UNPARSED 印到 stderr，不會安靜解錯
# ── TR518 負載 + 量功耗（TTL 尚未接）─────────────────
./Blanton_Script/blanton_tr518.sh start # 兩 unit，跑完 settle 120s
./Blanton_Script/TH6_SWB0_power_readback.sh # 19 條軌 V×I + TOTAL POWER
./Blanton_Script/TH6_SWB1_power_readback.sh
./Blanton_Script/blanton_tr518.sh stop # 只送 port cd lb=none
# ⚠️ stop 不還原 l2 learn / test mode（TR_RESTORE_LEARN=1 / _TESTMODE=1 才會）
# ── NFC tag 輪詢 ────────────────────────────────────
~/Blanton_Script/nfc_polling.sh start # 背景，start 會先清空 log
~/Blanton_Script/nfc_polling.sh status # pid、已跑幾輪、最後一筆結果
~/Blanton_Script/nfc_polling.sh report # PASS/FAIL/ERROR 統計，polling 中也能跑
~/Blanton_Script/nfc_polling.sh tail 50 # 最後 50 行（不 follow，不會卡住）
~/Blanton_Script/nfc_polling.sh stop
# log: ~/Blanton_Script/log/nfc_poll.log
# ERROR = 工具沒印出 [PASS]/[FAIL]（或逾時），跟「tag 讀不到」分開算
# NFC_INTERVAL_SEC / NFC_TIMEOUT_SEC / NFC_ARGS 可調（要每個子指令都帶）
# ── USB 目標偵測 ────────────────────────────────────
bash ~/Blanton_Script/usb_target.sh -o dev # /dev/sdX1
bash ~/Blanton_Script/usb_target.sh -o mnt # 掛好並回傳掛載點
# ── 背景壓力（平台工具）──────────────────────────────
bgctl run /usr/sbin/memtester 1G 100
bgctl list
bgctl stop --all ; bgctl reset --yes
# ── 通道對照表（開發機上跑，改完 settings/*.conf 一定要重產）──
./tools/gen_channel_map.sh # → docs/LTC2980_channel_map.csv（144 列）
./tools/gen_channel_map.sh - # 只印到 stdout
# ⚠️ 需要 gawk（用到 3 參數的 match()）；mawk 會直接擋下並提示
# ── 各工具的 help ───────────────────────────────────
blanton_fpga_help ; blanton_cb_i2c_help ; vi2c_help
temp_sensor_help ; pwr_data_help ; blanton_traffic_linespeed_help
```
**打包交付（在開發機上）：**
```bash
./publish/publish.sh # 版號讀 Script A 檔頭 → publish/Script_ABC_Blanton_V1.0.3/
./publish/publish.sh -z # 另出 zip
./publish/publish.sh -n # dry run
```
要出新版**先改 Script A 檔頭的 `; Version :`**，publish 才會用新版號建資料夾。
**Host 端跑一輪測試：**
```
@@ -94,6 +242,10 @@ Tera Term 連 COM port (115200-8-N-1)
若要回到「每支各自記錄」，B/C 的 History 需要補回去
- **Commit**：Conventional Commits，**英文**。scope 用 `ttl` / `fpga` / `i2c` / `vi2c` /
`margin` / `pwr` / `temp` / `docs`
- **換行符**：由 `.gitattributes` 管理 —— `*.sh` `*.conf` `*.py` `*.txt` `*.md` 釘 **LF**
（要在 SONiC 上跑／被 source），`*.ttl` 維持 **CRLF**（Tera Term 只在 Windows 跑）。
編輯 `.ttl` 時要保留 CRLF，別讓整檔變成 LF 產生假 diff
- **打包**：`./publish/publish.sh`，版號**讀 Script A 檔頭**不是參數 —— 先改檔頭再打包
- **Status 表**：`docs/TTL_Script_Blanton_Status_*.xlsx` 是逐項進度的正本（OK / On-Going + Owner），
完成一項就同步更新，別讓文件跟腳本脫節
@@ -113,8 +265,53 @@ Tera Term 連 COM port (115200-8-N-1)
- ⚠️ **ICB/PDB 一律走 VI2C（`blanton_icb_vi2c.sh`），不要走 VSPI**：VSPI ~18 ms/reg 會讓 I2C
byte 相間隔拉到 ~50 ms，踩中 SMBus 25–35 ms timeout，裝置直接 NACK。實測全掃 9.4 s vs 34.0 s。
- ⚠️ **I2C 讀一律 Repeated START**（不是 STOP + START），否則 PMBus/SMBus 裝置（VRM、EFUSE）不理。
- ⚠️ **Script C 的 BMC USB service log 不進 master log**：改成
`journalctl ... > log/bmc_usb_net.log` 再複製到隨身碟，**那是唯一一份**。
收工後翻不到就先確認 job 目錄裡有沒有這個檔
- ⚠️ **VI2C 這條路的壞法是「只壞高位元組」**，不是整包壞掉。`11.98 V` 會變成 `32.00 V`
—— 正的、數量級也不誇張，**擋全一/全零的過濾完全攔不到**。寫任何 VI2C 讀值工具都要有
合理範圍檢查 + 重讀，光靠 `PDB_REJECT_FFFF` 那種是不夠的（`pwr_brick.sh` 的教訓）
- ⚠️ **PMBus 的 PAGE 不是只有 VRM 通道在用**：ADPM12200 把每個量測放在不同 PAGE
（Vin 9 / Iin 10 / Vout 2 / Iout 14 / Temp 18），沒寫 PAGE 就讀，回的是 `0xFFFF` 或
`0x0000`。`blanton_pwr_data.sh` 的 PDB 表 page 是 `-`，這就是它整張表 NA 的原因
- ⚠️ **`--runtime` 是整個 job 的總時限，不是每個 pass 的**：V1.1.7 起由 `config.ttl` 的
`SSD_RUNTIME`/`SSD_COUNT`、`USB_RUNTIME`/`USB_COUNT` 指定（COUNT 就是 `--passes`）。
`qfx5252-stress-*` 跑滿 RUNTIME 秒就停，**`--passes` 不會把它延長** —— `RUNTIME=600` 就是
10 分鐘，不是 600×COUNT。要 24 小時就填 `86400`。壓力提早結束時 `bgctl list` 數量變少是
唯一線索，**不會報警**。V1.1.8 起出貨預設改為 `RUNTIME=3600`（1 小時），2 天 soak 要填 `172800`
- ⚠️ **`utils/kill_all_process.ttl` 只有 `kill $(jobs -p)`，抓不到 systemd unit**：把壓力工作改成
`systemd-run` 之後，Script C 一定要補對應的 `systemctl stop <unit>`，否則它會活過 Script C 燒進
下一輪，**收工的溫度／功耗全部是在滿載下量的**。V1.1.8 已為 `mlucas-amm` 補上。
Script 4 也改用同一個 unit，但它**沒有收尾段**，所以那行 `systemctl stop` 得由人手動下
- ⚠️ **`config.ttl` 少一個變數會讓 macro 當場中止，不是當成 0**：`EN_timestamp`（V1.1.8 新增，
餵 Script A `logopen` 的第 5 個參數）、`BMC_USB_RUNTIME` 都是必要項。只更新 `.ttl` 卻沿用舊的
`config.ttl`，Script A 會停在 `logopen` 那一行
- ⚠️ **log 時間戳的「格式」不在腳本裡**：`EN_timestamp` 只決定開不開，格式在 Tera Term 的
Setup → Additional settings → Log，存在**那台電腦的 `TERATERM.INI`**。同一份 macro 在兩台機器上
可以產生不同格式的 log，跨機比對前先確認
- ⚠️ **多相 VRM 與 LTC2980 是同一批軌的兩條路**：`blanton_multiphase_margin.sh`（原生 i2c）
和 `margin.sh`（LTC2980 PMBus）都假設自己是唯一寫入者，**沒有互斥檢查**，只靠人記得
- ⚠️ **traffic 的計數器基準在 v0.7.0 變了**：`tx 100 length=512` → `tx 200 length=324`，
每 burst 的位元組數 +27%。PASS/FAIL 是成對交叉比對不受影響，但**絕對值不能跟舊 log 比**
- ⚠️ **Script 4（thermal/safety）沒有收尾**：`while 1` 之後就是檔尾。中斷後 DUT 停在
`port cd lb=mac` / `l2 learn off` / `test mode nr=yes`，`mlucas-avx2` 也還在背景。
下一個測試會在被污染的狀態上開始，而且 **`show interfaces status` 看不出來**。
收尾：`blanton_tr518.sh stop` + `kill $(jobs -p)` + **`systemctl stop mlucas-amm`**
（V1.1.8 起 CPU 壓力是 systemd unit，`kill $(jobs -p)` 收不掉，少這一行 CPU 會一直滿載）
- ⚠️ **Script 4 與 Script B 不能共用同一台 DUT**：兩者都會接管 `port cd` 的 loopback
- ⚠️ **`settings/*.conf` 的 `VNOM` 是實測中位數，不是規格值**（2026-08-30 起）。它同時是
`margin_status` 偏差 % 的分母、也是 `margin_set` 推算 high/low/OV/UV 的基準，所以改它會
同時移動「看到的數字」和「實際打出去的電壓」。**跨這個日期的 margin log 不能直接互比。**
- ⚠️ **SWB 的 margin profile 是 per-CONN 的**：`combo_SWB_CONN13~16_{high,low}` 各自的百分比
對應該片板子的軌。套到別的 CONN 會 margin 到錯的軌，而且**不會報錯**。CB 沒有專屬 profile，
用通用的 `combo_high3` / `combo_low3`
- ⚠️ **`margin_save` / `STORE_USER_ALL` 會永久寫 NVM**，斷電保留 → **測試流程中絕不執行**，
以免覆蓋客戶出廠 config。`margin.sh` 的 auto-enable（`ON_OFF_CONFIG=0x1a`）只改 RAM，斷電復原。
v2.7.0 新增的 **`margin_save all` / `margin_save blanton` 一次寫 18 個 LTC2977**，
同一個警告放大 9 倍；另外 `0x15` 現在送 send-byte，不再帶多餘的 `0x00` data byte。
- ⚠️ **SWB 的 LTC2977 有兩條路可以到**：`cb_pmbus_*`（CB FPGA F3 Ch6/7/8/9 → pcimem）與
原生 i2c bus（`i2cset -f -y 13/14/15/16`，Ch+7 = bus）。`margin_save blanton` 走後者，
其餘功能走前者。同一顆晶片，**不要同時用兩條路**。
- ⚠️ **改電壓會弄壞 DUT**：套 profile 前確認該軌 OV/UV limit，且 servo DAC 注入電阻有 populate
（本板部分 margin 電阻標 PROTO，沒 populate 的軌電壓不會動，不是腳本壞掉）。
- ⚠️ **`ARB_LOST` ≠ 有裝置**：`vi2c_scan` 只看 `RX_ACK`，仲裁失敗會被誤報成裝置存在。
@@ -127,20 +324,82 @@ Tera Term 連 COM port (115200-8-N-1)
`Failed to execute the diagnostic command` 都照樣回 0），所以 `blanton_traffic_linespeed.sh`
是**比對輸出**而非看 exit code。另外 `bcmcmd` 一律要 `</dev/null` ——
否則它會吃掉 while 迴圈的 stdin，**只有第一個 VLAN 被設定**（V0.3.1 修過的 bug，很難看出來）。
**2026-09-07 `bcm_dsc_scan.sh` 又踩了同一個坑**：port 清單走 stdin，第一次 `bcmcmd` 就把剩下的吃光，
445 個 port 只掃了 1 個，而且 marker 與 dump 數量一起變少 → 比對通過、exit 0、log 看起來正常。
修法是迴圈改讀 fd 3（`done 3< "$PORTFILE"`）+ `bcmcmd ... < /dev/null`，並加一道
「實際迭代筆數 == 清單筆數」的檢查。**任何 `while ... done < file` 裡呼叫 `bcmcmd` 都要當它會讀 stdin。**
- ⚠️ **`stress_hhmd.py` / `stress_pcie.py` 已於 2026-08-17 由 KC 移除**（Status 表 ScriptB #5/#7）。
Script B 現在是 **8 個背景 job**（1 mlucas + 5 mem + ssd + usb），不是 10 個。
I2C／PCIe 的持續讀取壓力目前沒有替代品。
- ⚠️ **Script B 的 traffic 與 soak 迴圈都寫死 `-u 0`、且迴圈沒有 `pause`**：
只測到一塊 switch board，取樣間隔也不是 Status 表寫的 10 分鐘（取決於指令執行時間）。
改之前先確認現場期待的是哪一種。
- ⚠️ **`pause` 是停 macro，`sleep` 是停 DUT**（V1.2.0 起 A/B/C 一律用後者）：`pause N` 期間 macro 不理會
DUT，shell 是閒著的，等於用猜的估上一個指令跑多久；`sendln "sleep N"` + `wait prompt_sonic_root`
把等待放到 DUT 上，prompt 回來才繼續，兩邊不會走散，而且這一段會帶時戳進 log。
**Script 4 / Script 5 尚未轉換，仍在用 `pause`**；B/C 開頭那個 `pause 1` 也保留（登入前沒有 prompt 可等）
- ⚠️ **soak 迴圈沒有 `pause`**：取樣間隔不是 Status 表寫的 10 分鐘，而是取決於指令執行時間。
（`-u 0` 已於 `491e807` 移除，A/B/C 現在都跑兩個 switch unit。）
- 🔒 **`.sh` / `.conf` 一定要 LF**。CRLF 的 shell script 在 SONiC 上直接掛（`$'\r': command not found`）；
`settings/*.conf` 更陰險 —— 它們是被 `source` 的，`CB_I2C_CH=6` 會變成 `"6\r"`，安靜地壞掉。
`.gitattributes` 已擋住 git 這條路徑，但**不會回頭重寫既有工作區檔案**：早於它 clone 的目錄要
`git rm --cached -r . && git reset --hard` 才會生效，而且 **`git status` 乾淨不代表磁碟上是 LF**
（`--renormalize` 只在進 index 的路上轉換）。驗證要看 byte：`grep -rlU $'\r' <dir>`
- ⚠️ **TTL 的 `timeout` 是全域的**：`timeout = N` 之後**每一個** `wait` 都被限制在 N 秒。逾時的 `wait`
直接返回而沒吃到 prompt，下一個指令就在前一個還沒跑完時送出，之後整輪錯開一拍。**設了一定要
配一個 `timeout = 0` 還原**（`wait_init.ttl` 60→0；Script B 的 cdc_ncm 探測 15→0 兩處各還原一次
—— `endif` 之後走成功路徑、`:skip_ping` 走跳過路徑；Script 5 同一段**直接還原在 `if` 之前**，
一行涵蓋兩條路徑，因為它的 ping 區塊要 `wait` 一個 `sleep 10`，DUT 一忙就逼近 15 s 上限）
- ⚠️ **`goto` 的標籤沒定義，Tera Term 是執行到才報錯**：Script 5 從 Script B 抄 cdc_ncm 探測時
只帶走 `goto skip_ping` 沒帶 `:skip_ping`，平常測不出來 —— 只有真的抓不到 NCM 介面走進那條分支
才會跳錯誤視窗停住整個循環（已補）。抄段落過去時**連標籤一起抄**
- ⚠️ **兩張管理網卡同網段會 ARP flux**：`mgmt_ping_monitor.sh` 讓 eth0/eth1 同時 up，同一個 /24 下
對端 ARP 可能由任一張卡回應，回包落在沒送封包的那張。`ARP_STRICT=1` 擋掉；判讀時看 `RESULT` 行的
`nic_tx`/`nic_rx`（該卡自己的 packet delta）—— **ping 成功但 `nic_tx` 接近 0 = 封包從另一張卡出去的**
- ⚠️ **PRBS 跑起來時 `show interfaces status` 會顯示 DOWN**，那是 link 離開正常運作模式，不是故障。
`port_prbs_monitor.sh` 的 `start` 因此刻意不印 port status（避免測試員誤判），只在 `prbs clear` 之後的報表裡印
- ⚠️ **`ip -s link` 的欄位順序是 `bytes packets errors ...`**，要 packet 數取的是**第 2 欄**不是第 1 欄
- ⚠️ **`mgmt_ping_monitor.sh` / `bmc_monitor*.sh` 需要 exec bit**，且**不是改用 `bash x.sh start` 就能繞過** ——
`do_start` 內部是 `setsid "$SCRIPT_PATH" __daemon`，直接執行該路徑。git 記錄是 `100644`，
Windows → 隨身碟 → DUT 也帶不動權限位元，所以佈署後要 `chmod +x ~/Blanton_Script/bmc_monitor*.sh`。
沒做的話 start 會 Permission denied、後面的 `cat` 撲空，而且**不會報錯**，只會得到一份全空的 log
- ⚠️ **這幾支 monitor 的 `tail` 子命令是 `tail -n 50 -f`，永遠不返回**。TTL 裡絕對不要呼叫它
（Script C 曾因此卡死，`18ce7a1` 改成直接 `cat log/*.log`）
- ⚠️ **背景 monitor 的 `start` 只等 1 秒就返回**，不是跑完一輪。Script A 要做一輪基線的話，
`start` 和 `stop` 中間必須 `pause`（目前是 45 秒，一輪約 30 秒）—— 少了它 log 只會有 START banner
- ⚠️ **風扇那段設完會 `wait "Set all configured fan channels to"` 等確認提示再送 `y`**。該提示沒出現
（版本改了、字串換了）就會永遠卡住且不報錯 —— 現場看起來像 Script A 當掉
- ⚠️ **`show_dmesg.ttl` 結尾會 `dmesg -C` 清空 kernel ring buffer**。這是刻意的（讓 Script C 只看到
soak 期間新產生的訊息），但代表事後在 DUT 上 `dmesg` 撈不到舊訊息 —— 內容只存在 master log 裡
- ⚠️ **`bcmcmd` 的輸出是 CRLF**。`show c` 的計數器後面還跟著 delta，所以「砍掉第一個空白之後」
順便把 CR 砍掉了；但 `prbsstat Ber` 的 BER 是**整行最後一個 token**，CR 直接黏在數字上 ——
數字驗證會失敗（全變 NA），而且印出來時 CR 把游標拉回行首，後面的欄位會**覆蓋掉前面的欄位**。
寫新的 awk 解析器時，第一件事就是 `{ gsub(/\r/, "") }`（`blanton_ber.sh` V1.0.1 的教訓）
- ⚠️ **`bcmcmd` 的 exit code 兩邊都不能信**：BCM shell 拒絕指令時它回 **0**
（`blanton_traffic_linespeed.sh` V0.3.1），而 `tr 518` 這種跑很久的指令會讓它 poll 逾時而回
**非 0**，但指令其實已經在跑（`polling socket timeout: Success`）。可靠的作法是**找成功的證據**
——例如 `tr 518` 印出 `TR 518 TEST PARAMETERS` 才算收下（`blanton_tr518.sh` V1.0.1）
- ⚠️ **交換晶片不會把封包從進來的那個 port 送回去**（source-port knockout）。所以單一 port 的
VLAN 打不出持續流量：`tx 100` 就是一趟來回然後結束。`ce0` 靠 **ingress mirror 打回自己**繞過
這個限制（鏡像複本不經過 egress filter），**且不 stop 就不會自己停**
- ⚠️ **DUT 的 awk 對 `%d` 會夾到 INT32**（2147483647）。線速流量的計數器是 ~10¹² 量級，
所以 awk 裡輸出大數一律用 `%.0f`（double 域，精確到 2⁵³）。`blanton_traffic_linespeed.sh`
V0.4.1 已修；寫新的 awk 報表時要記得同一件事
## 資料夾說明
- `src/Script_ABC_Blanton/` — 可執行內容（Tera Term 工作目錄；內含要 scp 到 DUT 的 `Blanton_Script/`）
- `docs/` — 客戶 FPGA 規格、AER/EDAC 檢查依據、逐項 Status 表（最新為 `*_20260817.xlsx`）
- `docs/` — 客戶 FPGA 規格、AER/EDAC 檢查依據、逐項 Status 表（最新為 `*_20260817.xlsx`）、
`LTC2980_channel_map.csv`（9 個 `settings/*.conf` 合併成 Board,CONN,Ch,NetName,Vnom 144 列，
查 net 對應哪片哪個 channel 用；**改 `.conf` 後要重跑產生**）
- `tools/` — Host / 離線端：`bcm_mibpair_report_V1.1.0.py`（drivshell log → per-pair 報表）、
`traffic_loopback_*.txt`（bcmcmd 原始指令表，`blanton_traffic_linespeed.sh` 是其 bash 版，
**改 loopback 線路時兩邊要同步**）
- `publish/` — 交付用打包輸出（`Blanton_Script_ABC_v<ver>_<date>/` + zip）
**改 loopback 線路時兩邊要同步**）、`100G_PRBS.txt` / `TR518.txt` / `fan_ctrl.txt`
（上機手貼用的原始指令；PRBS / TR518 / 100G traffic / multiphase normal 都已有對應 `.sh`）
- `publish/` — `publish.sh`（打包工具，**進 git**）+ `Script_ABC_Blanton_<Ver>/` 產出（**gitignored**）
- `tmp/` — 🚫 gitignored：**還沒上機驗證**的腳本暫存區（目前 `blanton_reboottest.sh`）。
上機測過才搬進 `src/Script_ABC_Blanton/Blanton_Script/` 並進 git —— 未驗證的東西不該混在
交付包裡，publish 時測試員分不出哪支能信
- `src/Script_ABC_Blanton/hammer/` — 🚫 gitignored：mlucas 的 ELF binary（~99 MB，avx512 / avx2 /
avx / sse2 / generic-c）。Script B 與 Script 4 會 `chmod +x` 後執行，但**它由 DUT image 帶**，
不從這個 repo 發 —— binary 一旦進 git 就永久留在 history，每個 clone 都要付這個代價。
`publish.sh` 也把它排除，所以打包結果不會因為誰的工作目錄有沒有 binary 而變成 100 MB
- `secret/` — 🚫 gitignored（除 `README.md` 與 `*.example`）：DUT 帳密、per-unit BDF 覆寫、COM 設定
- `For_AI/` — 🚫 gitignored：AI 協作素材（波形截圖、草稿筆記）
docs/ADPM12200CMLZxx_DS_Datasheet_2025_12_19.pdf
BIN
View File
Binary file not shown.
docs/Blanton_Test_Flow.drawio
+172
View File
@@ -0,0 +1,172 @@
<mxfile host="app.diagrams.net" agent="Blanton_TTL_Script/tools" version="24.7.17">
<diagram id="blanton-test-flow" name="Blanton Test Flow">
<mxGraphModel dx="1400" dy="900" grid="1" gridSize="10" guides="1" tooltips="1" connect="1" arrows="1" fold="1" page="1" pageScale="1" pageWidth="1670" pageHeight="1785" math="0" shadow="0">
<root>
<mxCell id="0"/>
<mxCell id="1" parent="0"/>
<mxCell id="n11" value="Blanton (Project Helios) — 測試流程" style="text;html=1;align=center;verticalAlign=middle;fontSize=20;fontStyle=1;" vertex="1" parent="1"><mxGeometry x="30" y="20" width="1610" height="34" as="geometry"/></mxCell>
<mxCell id="n12" value="來源：src/Script_ABC_Blanton/{1,2,3}_Blanton_Script_*.ttl（Script A V1.1.3）　·　⟨…⟩ = 由 config.ttl 的旗標決定" style="text;html=1;align=center;verticalAlign=middle;fontSize=11;fontColor=#666666;" vertex="1" parent="1"><mxGeometry x="30" y="54" width="1610" height="20" as="geometry"/></mxCell>
<mxCell id="n13" value="Script A — Pre-test（基線 / 環境建立）" style="swimlane;html=1;startSize=34;fillColor=#ffffff;strokeColor=#4d4d4d;fontSize=14;fontStyle=1;horizontal=1;" vertex="1" parent="1"><mxGeometry x="30" y="96" width="380" height="1459" as="geometry"/></mxCell>
<mxCell id="n14" value="&lt;b&gt;include config.ttl&lt;/b&gt;&lt;br&gt;project_name, strTestcase, EN_Margin,&lt;br&gt;EN_log, FAN_SPEED, SWB_UNIT0/1" style="rounded=1;whiteSpace=wrap;html=1;fillColor=#fff2cc;strokeColor=#d6b656;align=left;spacingLeft=8;verticalAlign=middle;fontSize=11;" vertex="1" parent="n13"><mxGeometry x="18" y="44" width="344" height="64" as="geometry"/></mxCell>
<mxCell id="n15" value="&lt;b&gt;logopen&lt;/b&gt; Logs/&amp;lt;proj&amp;gt;_&amp;lt;case&amp;gt;_&amp;lt;ts&amp;gt;.log&lt;br&gt;&lt;i&gt;⟨EN_log = 1⟩&lt;/i&gt;" style="rounded=1;whiteSpace=wrap;html=1;fillColor=#fff2cc;strokeColor=#d6b656;align=left;spacingLeft=8;verticalAlign=middle;fontSize=11;" vertex="1" parent="n13"><mxGeometry x="18" y="124" width="344" height="49" as="geometry"/></mxCell>
<mxCell id="e16" value="" style="edgeStyle=orthogonalEdgeStyle;rounded=0;html=1;exitX=0.5;exitY=1;exitDx=0;exitDy=0;entryX=0.5;entryY=0;entryDx=0;entryDy=0;strokeColor=#4d4d4d;" edge="1" parent="1" source="n14" target="n15"><mxGeometry relative="1" as="geometry"/></mxCell>
<mxCell id="n17" value="&lt;b&gt;Root Login&lt;/b&gt;&lt;br&gt;login → sudo -i → root@sonic:~#" style="rounded=1;whiteSpace=wrap;html=1;fillColor=#dae8fc;strokeColor=#6c8ebf;align=left;spacingLeft=8;verticalAlign=middle;fontSize=11;" vertex="1" parent="n13"><mxGeometry x="18" y="189" width="344" height="49" as="geometry"/></mxCell>
<mxCell id="e18" value="" style="edgeStyle=orthogonalEdgeStyle;rounded=0;html=1;exitX=0.5;exitY=1;exitDx=0;exitDy=0;entryX=0.5;entryY=0;entryDx=0;entryDy=0;strokeColor=#4d4d4d;" edge="1" parent="1" source="n15" target="n17"><mxGeometry relative="1" as="geometry"/></mxCell>
<mxCell id="n19" value="&lt;b&gt;Pre Setting&lt;/b&gt;&lt;br&gt;date -s 對時 · rm /host/hw-eval/jobs/*" style="rounded=1;whiteSpace=wrap;html=1;fillColor=#dae8fc;strokeColor=#6c8ebf;align=left;spacingLeft=8;verticalAlign=middle;fontSize=11;" vertex="1" parent="n13"><mxGeometry x="18" y="254" width="344" height="49" as="geometry"/></mxCell>
<mxCell id="e20" value="" style="edgeStyle=orthogonalEdgeStyle;rounded=0;html=1;exitX=0.5;exitY=1;exitDx=0;exitDy=0;entryX=0.5;entryY=0;entryDx=0;entryDy=0;strokeColor=#4d4d4d;" edge="1" parent="1" source="n17" target="n19"><mxGeometry relative="1" as="geometry"/></mxCell>
<mxCell id="n21" value="&lt;b&gt;HW Test Session — 收前一輪&lt;/b&gt;&lt;br&gt;hw-test-session finish · bgctl reset --yes&lt;br&gt;bgctl stop --all · &lt;b&gt;bgctl list 必須空&lt;/b&gt;" style="rounded=1;whiteSpace=wrap;html=1;fillColor=#f8cecc;strokeColor=#b85450;align=left;spacingLeft=8;verticalAlign=middle;fontSize=11;" vertex="1" parent="n13"><mxGeometry x="18" y="319" width="344" height="64" as="geometry"/></mxCell>
<mxCell id="e22" value="" style="edgeStyle=orthogonalEdgeStyle;rounded=0;html=1;exitX=0.5;exitY=1;exitDx=0;exitDy=0;entryX=0.5;entryY=0;entryDx=0;entryDy=0;strokeColor=#4d4d4d;" edge="1" parent="1" source="n19" target="n21"><mxGeometry relative="1" as="geometry"/></mxCell>
<mxCell id="n23" value="&lt;b&gt;hw-test-session start&lt;/b&gt;" style="rounded=1;whiteSpace=wrap;html=1;fillColor=#dae8fc;strokeColor=#6c8ebf;align=left;spacingLeft=8;verticalAlign=middle;fontSize=11;" vertex="1" parent="n13"><mxGeometry x="18" y="399" width="344" height="34" as="geometry"/></mxCell>
<mxCell id="e24" value="" style="edgeStyle=orthogonalEdgeStyle;rounded=0;html=1;exitX=0.5;exitY=1;exitDx=0;exitDy=0;entryX=0.5;entryY=0;entryDx=0;entryDy=0;strokeColor=#4d4d4d;" edge="1" parent="1" source="n21" target="n23"><mxGeometry relative="1" as="geometry"/></mxCell>
<mxCell id="n25" value="&lt;b&gt;FAN SPEED&lt;/b&gt;&lt;br&gt;max31790 rebind ×2 → fan-speed-control.sh $FAN_SPEED" style="rounded=1;whiteSpace=wrap;html=1;fillColor=#dae8fc;strokeColor=#6c8ebf;align=left;spacingLeft=8;verticalAlign=middle;fontSize=11;" vertex="1" parent="n13"><mxGeometry x="18" y="449" width="344" height="49" as="geometry"/></mxCell>
<mxCell id="e26" value="" style="edgeStyle=orthogonalEdgeStyle;rounded=0;html=1;exitX=0.5;exitY=1;exitDx=0;exitDy=0;entryX=0.5;entryY=0;entryDx=0;entryDy=0;strokeColor=#4d4d4d;" edge="1" parent="1" source="n23" target="n25"><mxGeometry relative="1" as="geometry"/></mxCell>
<mxCell id="n27" value="&lt;b&gt;Wait DUT Init&lt;/b&gt; utils/wait_init.ttl&lt;br&gt;輪詢 bcmcmd ps，兩 unit link up ≥ 216&lt;br&gt;&lt;i&gt;⟨SWB_UNIT0 / SWB_UNIT1⟩ · 無逾時出口&lt;/i&gt;" style="rounded=1;whiteSpace=wrap;html=1;fillColor=#fff2cc;strokeColor=#d6b656;align=left;spacingLeft=8;verticalAlign=middle;fontSize=11;" vertex="1" parent="n13"><mxGeometry x="18" y="514" width="344" height="64" as="geometry"/></mxCell>
<mxCell id="e28" value="" style="edgeStyle=orthogonalEdgeStyle;rounded=0;html=1;exitX=0.5;exitY=1;exitDx=0;exitDy=0;entryX=0.5;entryY=0;entryDx=0;entryDy=0;strokeColor=#4d4d4d;" edge="1" parent="1" source="n25" target="n27"><mxGeometry relative="1" as="geometry"/></mxCell>
<mxCell id="n29" value="&lt;b&gt;DUT Info&lt;/b&gt;&lt;br&gt;show boot/version/platform · fwutil · syseeprom&lt;br&gt;ssdhealth · TPM · NVMe" style="rounded=1;whiteSpace=wrap;html=1;fillColor=#dae8fc;strokeColor=#6c8ebf;align=left;spacingLeft=8;verticalAlign=middle;fontSize=11;" vertex="1" parent="n13"><mxGeometry x="18" y="594" width="344" height="64" as="geometry"/></mxCell>
<mxCell id="e30" value="" style="edgeStyle=orthogonalEdgeStyle;rounded=0;html=1;exitX=0.5;exitY=1;exitDx=0;exitDy=0;entryX=0.5;entryY=0;entryDx=0;entryDy=0;strokeColor=#4d4d4d;" edge="1" parent="1" source="n27" target="n29"><mxGeometry relative="1" as="geometry"/></mxCell>
<mxCell id="n31" value="&lt;b&gt;BMC&lt;/b&gt; bmc-first-enroll · version · status" style="rounded=1;whiteSpace=wrap;html=1;fillColor=#dae8fc;strokeColor=#6c8ebf;align=left;spacingLeft=8;verticalAlign=middle;fontSize=11;" vertex="1" parent="n13"><mxGeometry x="18" y="674" width="344" height="34" as="geometry"/></mxCell>
<mxCell id="e32" value="" style="edgeStyle=orthogonalEdgeStyle;rounded=0;html=1;exitX=0.5;exitY=1;exitDx=0;exitDy=0;entryX=0.5;entryY=0;entryDx=0;entryDy=0;strokeColor=#4d4d4d;" edge="1" parent="1" source="n29" target="n31"><mxGeometry relative="1" as="geometry"/></mxCell>
<mxCell id="n33" value="&lt;b&gt;Load Shell Script&lt;/b&gt;&lt;br&gt;source blanton_fpga_pcimem / cb_i2c / icb_vi2c /&lt;br&gt;temp_sensor / pwr_data / traffic_linespeed / margin" style="rounded=1;whiteSpace=wrap;html=1;fillColor=#dae8fc;strokeColor=#6c8ebf;align=left;spacingLeft=8;verticalAlign=middle;fontSize=11;" vertex="1" parent="n13"><mxGeometry x="18" y="724" width="344" height="64" as="geometry"/></mxCell>
<mxCell id="e34" value="" style="edgeStyle=orthogonalEdgeStyle;rounded=0;html=1;exitX=0.5;exitY=1;exitDx=0;exitDy=0;entryX=0.5;entryY=0;entryDx=0;entryDy=0;strokeColor=#4d4d4d;" edge="1" parent="1" source="n31" target="n33"><mxGeometry relative="1" as="geometry"/></mxCell>
<mxCell id="n35" value="&lt;b&gt;CLEAR PCIe Error&lt;/b&gt; ×7&lt;br&gt;TH6_SWB0 · TH6_SWB1 · FPGA · BMC · DDR · I210 · SSD" style="rounded=1;whiteSpace=wrap;html=1;fillColor=#dae8fc;strokeColor=#6c8ebf;align=left;spacingLeft=8;verticalAlign=middle;fontSize=11;" vertex="1" parent="n13"><mxGeometry x="18" y="804" width="344" height="49" as="geometry"/></mxCell>
<mxCell id="e36" value="" style="edgeStyle=orthogonalEdgeStyle;rounded=0;html=1;exitX=0.5;exitY=1;exitDx=0;exitDy=0;entryX=0.5;entryY=0;entryDx=0;entryDy=0;strokeColor=#4d4d4d;" edge="1" parent="1" source="n33" target="n35"><mxGeometry relative="1" as="geometry"/></mxCell>
<mxCell id="n37" value="&lt;b&gt;PCIe tree / link / bandwidth&lt;/b&gt; utils/pcie_bus.ttl" style="rounded=1;whiteSpace=wrap;html=1;fillColor=#dae8fc;strokeColor=#6c8ebf;align=left;spacingLeft=8;verticalAlign=middle;fontSize=11;" vertex="1" parent="n13"><mxGeometry x="18" y="869" width="344" height="34" as="geometry"/></mxCell>
<mxCell id="e38" value="" style="edgeStyle=orthogonalEdgeStyle;rounded=0;html=1;exitX=0.5;exitY=1;exitDx=0;exitDy=0;entryX=0.5;entryY=0;entryDx=0;entryDy=0;strokeColor=#4d4d4d;" edge="1" parent="1" source="n35" target="n37"><mxGeometry relative="1" as="geometry"/></mxCell>
<mxCell id="n39" value="&lt;b&gt;Check Margin&lt;/b&gt; margin_status_all.sh（9 顆 LTC2980）&lt;br&gt;&lt;i&gt;⟨EN_Margin = 1⟩&lt;/i&gt;" style="rounded=1;whiteSpace=wrap;html=1;fillColor=#fff2cc;strokeColor=#d6b656;align=left;spacingLeft=8;verticalAlign=middle;fontSize=11;" vertex="1" parent="n13"><mxGeometry x="18" y="919" width="344" height="49" as="geometry"/></mxCell>
<mxCell id="e40" value="" style="edgeStyle=orthogonalEdgeStyle;rounded=0;html=1;exitX=0.5;exitY=1;exitDx=0;exitDy=0;entryX=0.5;entryY=0;entryDx=0;entryDy=0;strokeColor=#4d4d4d;" edge="1" parent="1" source="n37" target="n39"><mxGeometry relative="1" as="geometry"/></mxCell>
<mxCell id="n41" value="&lt;b&gt;TAKE DATA&lt;/b&gt; setup_pmon.ttl（9 項）+ show_dmesg.ttl" style="rounded=1;whiteSpace=wrap;html=1;fillColor=#dae8fc;strokeColor=#6c8ebf;align=left;spacingLeft=8;verticalAlign=middle;fontSize=11;" vertex="1" parent="n13"><mxGeometry x="18" y="984" width="344" height="34" as="geometry"/></mxCell>
<mxCell id="e42" value="" style="edgeStyle=orthogonalEdgeStyle;rounded=0;html=1;exitX=0.5;exitY=1;exitDx=0;exitDy=0;entryX=0.5;entryY=0;entryDx=0;entryDy=0;strokeColor=#4d4d4d;" edge="1" parent="1" source="n39" target="n41"><mxGeometry relative="1" as="geometry"/></mxCell>
<mxCell id="n43" value="&lt;b&gt;10G/1G MGMT Ping&lt;/b&gt;&lt;br&gt;start → 30s → report → clear" style="rounded=1;whiteSpace=wrap;html=1;fillColor=#dae8fc;strokeColor=#6c8ebf;align=left;spacingLeft=8;verticalAlign=middle;fontSize=11;" vertex="1" parent="n13"><mxGeometry x="18" y="1034" width="344" height="49" as="geometry"/></mxCell>
<mxCell id="e44" value="" style="edgeStyle=orthogonalEdgeStyle;rounded=0;html=1;exitX=0.5;exitY=1;exitDx=0;exitDy=0;entryX=0.5;entryY=0;entryDx=0;entryDy=0;strokeColor=#4d4d4d;" edge="1" parent="1" source="n41" target="n43"><mxGeometry relative="1" as="geometry"/></mxCell>
<mxCell id="n45" value="&lt;b&gt;NFC Test&lt;/b&gt;&lt;br&gt;start → status → 30s → stop → report" style="rounded=1;whiteSpace=wrap;html=1;fillColor=#dae8fc;strokeColor=#6c8ebf;align=left;spacingLeft=8;verticalAlign=middle;fontSize=11;" vertex="1" parent="n13"><mxGeometry x="18" y="1099" width="344" height="49" as="geometry"/></mxCell>
<mxCell id="e46" value="" style="edgeStyle=orthogonalEdgeStyle;rounded=0;html=1;exitX=0.5;exitY=1;exitDx=0;exitDy=0;entryX=0.5;entryY=0;entryDx=0;entryDy=0;strokeColor=#4d4d4d;" edge="1" parent="1" source="n43" target="n45"><mxGeometry relative="1" as="geometry"/></mxCell>
<mxCell id="n47" value="&lt;b&gt;100G Port Status&lt;/b&gt; Ethernet513 / 514" style="rounded=1;whiteSpace=wrap;html=1;fillColor=#dae8fc;strokeColor=#6c8ebf;align=left;spacingLeft=8;verticalAlign=middle;fontSize=11;" vertex="1" parent="n13"><mxGeometry x="18" y="1164" width="344" height="34" as="geometry"/></mxCell>
<mxCell id="e48" value="" style="edgeStyle=orthogonalEdgeStyle;rounded=0;html=1;exitX=0.5;exitY=1;exitDx=0;exitDy=0;entryX=0.5;entryY=0;entryDx=0;entryDy=0;strokeColor=#4d4d4d;" edge="1" parent="1" source="n45" target="n47"><mxGeometry relative="1" as="geometry"/></mxCell>
<mxCell id="n49" value="&lt;b&gt;100G PRBS&lt;/b&gt; port_prbs_monitor.sh&lt;br&gt;&lt;i&gt;整段註解 — bring-up 中&lt;/i&gt;" style="rounded=1;whiteSpace=wrap;html=1;fillColor=#f5f5f5;strokeColor=#999999;dashed=1;align=left;spacingLeft=8;verticalAlign=middle;fontSize=11;fontColor=#808080;" vertex="1" parent="n13"><mxGeometry x="18" y="1214" width="344" height="49" as="geometry"/></mxCell>
<mxCell id="e50" value="" style="edgeStyle=orthogonalEdgeStyle;rounded=0;html=1;exitX=0.5;exitY=1;exitDx=0;exitDy=0;entryX=0.5;entryY=0;entryDx=0;entryDy=0;strokeColor=#4d4d4d;" edge="1" parent="1" source="n47" target="n49"><mxGeometry relative="1" as="geometry"/></mxCell>
<mxCell id="n51" value="&lt;b&gt;First Traffic Test（基線）&lt;/b&gt;&lt;br&gt;ps → init → clear → 15s → show → start → 15s → report&lt;br&gt;&lt;i&gt;⟨SWB_UNIT⟩ 兩邊 / -u 0 / -u 1 / skip&lt;/i&gt;" style="rounded=1;whiteSpace=wrap;html=1;fillColor=#fff2cc;strokeColor=#d6b656;align=left;spacingLeft=8;verticalAlign=middle;fontSize=11;" vertex="1" parent="n13"><mxGeometry x="18" y="1279" width="344" height="64" as="geometry"/></mxCell>
<mxCell id="e52" value="" style="edgeStyle=orthogonalEdgeStyle;rounded=0;html=1;exitX=0.5;exitY=1;exitDx=0;exitDy=0;entryX=0.5;entryY=0;entryDx=0;entryDy=0;strokeColor=#4d4d4d;" edge="1" parent="1" source="n49" target="n51"><mxGeometry relative="1" as="geometry"/></mxCell>
<mxCell id="n53" value="&lt;b&gt;Show power-on uptime&lt;/b&gt;" style="rounded=1;whiteSpace=wrap;html=1;fillColor=#dae8fc;strokeColor=#6c8ebf;align=left;spacingLeft=8;verticalAlign=middle;fontSize=11;" vertex="1" parent="n13"><mxGeometry x="18" y="1359" width="344" height="34" as="geometry"/></mxCell>
<mxCell id="e54" value="" style="edgeStyle=orthogonalEdgeStyle;rounded=0;html=1;exitX=0.5;exitY=1;exitDx=0;exitDy=0;entryX=0.5;entryY=0;entryDx=0;entryDy=0;strokeColor=#4d4d4d;" edge="1" parent="1" source="n51" target="n53"><mxGeometry relative="1" as="geometry"/></mxCell>
<mxCell id="n55" value="messagebox 『Script A DONE / Start Script B』" style="rounded=1;whiteSpace=wrap;html=1;fillColor=#ffe6cc;strokeColor=#d79b00;align=center;verticalAlign=middle;fontSize=11;fontStyle=1;" vertex="1" parent="n13"><mxGeometry x="18" y="1409" width="344" height="34" as="geometry"/></mxCell>
<mxCell id="e56" value="" style="edgeStyle=orthogonalEdgeStyle;rounded=0;html=1;exitX=0.5;exitY=1;exitDx=0;exitDy=0;entryX=0.5;entryY=0;entryDx=0;entryDy=0;strokeColor=#4d4d4d;" edge="1" parent="1" source="n53" target="n55"><mxGeometry relative="1" as="geometry"/></mxCell>
<mxCell id="n57" value="Script B — Stress（壓力 soak，人為中斷才結束）" style="swimlane;html=1;startSize=34;fillColor=#ffffff;strokeColor=#4d4d4d;fontSize=14;fontStyle=1;horizontal=1;" vertex="1" parent="1"><mxGeometry x="440" y="96" width="380" height="1014" as="geometry"/></mxCell>
<mxCell id="n58" value="&lt;b&gt;include config.ttl&lt;/b&gt;" style="rounded=1;whiteSpace=wrap;html=1;fillColor=#fff2cc;strokeColor=#d6b656;align=left;spacingLeft=8;verticalAlign=middle;fontSize=11;" vertex="1" parent="n57"><mxGeometry x="18" y="44" width="344" height="34" as="geometry"/></mxCell>
<mxCell id="n59" value="&lt;b&gt;CLEAR EVENT&lt;/b&gt;" style="rounded=1;whiteSpace=wrap;html=1;fillColor=#dae8fc;strokeColor=#6c8ebf;align=left;spacingLeft=8;verticalAlign=middle;fontSize=11;" vertex="1" parent="n57"><mxGeometry x="18" y="94" width="344" height="34" as="geometry"/></mxCell>
<mxCell id="e60" value="" style="edgeStyle=orthogonalEdgeStyle;rounded=0;html=1;exitX=0.5;exitY=1;exitDx=0;exitDy=0;entryX=0.5;entryY=0;entryDx=0;entryDy=0;strokeColor=#4d4d4d;" edge="1" parent="1" source="n58" target="n59"><mxGeometry relative="1" as="geometry"/></mxCell>
<mxCell id="n61" value="&lt;b&gt;AMD CPU Stress&lt;/b&gt; mlucas-avx2 -cpu 0:15" style="rounded=1;whiteSpace=wrap;html=1;fillColor=#dae8fc;strokeColor=#6c8ebf;align=left;spacingLeft=8;verticalAlign=middle;fontSize=11;" vertex="1" parent="n57"><mxGeometry x="18" y="144" width="344" height="34" as="geometry"/></mxCell>
<mxCell id="e62" value="" style="edgeStyle=orthogonalEdgeStyle;rounded=0;html=1;exitX=0.5;exitY=1;exitDx=0;exitDy=0;entryX=0.5;entryY=0;entryDx=0;entryDy=0;strokeColor=#4d4d4d;" edge="1" parent="1" source="n59" target="n61"><mxGeometry relative="1" as="geometry"/></mxCell>
<mxCell id="n63" value="&lt;b&gt;BMC DDR Stress&lt;/b&gt; bgctl run bmc-manager memtester" style="rounded=1;whiteSpace=wrap;html=1;fillColor=#dae8fc;strokeColor=#6c8ebf;align=left;spacingLeft=8;verticalAlign=middle;fontSize=11;" vertex="1" parent="n57"><mxGeometry x="18" y="194" width="344" height="34" as="geometry"/></mxCell>
<mxCell id="e64" value="" style="edgeStyle=orthogonalEdgeStyle;rounded=0;html=1;exitX=0.5;exitY=1;exitDx=0;exitDy=0;entryX=0.5;entryY=0;entryDx=0;entryDy=0;strokeColor=#4d4d4d;" edge="1" parent="1" source="n61" target="n63"><mxGeometry relative="1" as="geometry"/></mxCell>
<mxCell id="n65" value="&lt;b&gt;BMC Monitor&lt;/b&gt; bmc_monitor.sh start&lt;br&gt;free -m + I2C 寫入/讀回圖樣測試" style="rounded=1;whiteSpace=wrap;html=1;fillColor=#dae8fc;strokeColor=#6c8ebf;align=left;spacingLeft=8;verticalAlign=middle;fontSize=11;" vertex="1" parent="n57"><mxGeometry x="18" y="244" width="344" height="49" as="geometry"/></mxCell>
<mxCell id="e66" value="" style="edgeStyle=orthogonalEdgeStyle;rounded=0;html=1;exitX=0.5;exitY=1;exitDx=0;exitDy=0;entryX=0.5;entryY=0;entryDx=0;entryDy=0;strokeColor=#4d4d4d;" edge="1" parent="1" source="n63" target="n65"><mxGeometry relative="1" as="geometry"/></mxCell>
<mxCell id="n67" value="&lt;b&gt;DDR Memory Stress&lt;/b&gt; bgctl run memtester" style="rounded=1;whiteSpace=wrap;html=1;fillColor=#dae8fc;strokeColor=#6c8ebf;align=left;spacingLeft=8;verticalAlign=middle;fontSize=11;" vertex="1" parent="n57"><mxGeometry x="18" y="309" width="344" height="34" as="geometry"/></mxCell>
<mxCell id="e68" value="" style="edgeStyle=orthogonalEdgeStyle;rounded=0;html=1;exitX=0.5;exitY=1;exitDx=0;exitDy=0;entryX=0.5;entryY=0;entryDx=0;entryDy=0;strokeColor=#4d4d4d;" edge="1" parent="1" source="n65" target="n67"><mxGeometry relative="1" as="geometry"/></mxCell>
<mxCell id="n69" value="&lt;b&gt;SSD read/write&lt;/b&gt; bgctl run qfx5252-stress-ssd" style="rounded=1;whiteSpace=wrap;html=1;fillColor=#dae8fc;strokeColor=#6c8ebf;align=left;spacingLeft=8;verticalAlign=middle;fontSize=11;" vertex="1" parent="n57"><mxGeometry x="18" y="359" width="344" height="34" as="geometry"/></mxCell>
<mxCell id="e70" value="" style="edgeStyle=orthogonalEdgeStyle;rounded=0;html=1;exitX=0.5;exitY=1;exitDx=0;exitDy=0;entryX=0.5;entryY=0;entryDx=0;entryDy=0;strokeColor=#4d4d4d;" edge="1" parent="1" source="n67" target="n69"><mxGeometry relative="1" as="geometry"/></mxCell>
<mxCell id="n71" value="&lt;b&gt;USB read/write&lt;/b&gt; usb_target.sh -o dev → bgctl run&lt;br&gt;qfx5252-stress-usb" style="rounded=1;whiteSpace=wrap;html=1;fillColor=#dae8fc;strokeColor=#6c8ebf;align=left;spacingLeft=8;verticalAlign=middle;fontSize=11;" vertex="1" parent="n57"><mxGeometry x="18" y="409" width="344" height="49" as="geometry"/></mxCell>
<mxCell id="e72" value="" style="edgeStyle=orthogonalEdgeStyle;rounded=0;html=1;exitX=0.5;exitY=1;exitDx=0;exitDy=0;entryX=0.5;entryY=0;entryDx=0;entryDy=0;strokeColor=#4d4d4d;" edge="1" parent="1" source="n69" target="n71"><mxGeometry relative="1" as="geometry"/></mxCell>
<mxCell id="n73" value="&lt;b&gt;SHOW Background job&lt;/b&gt; bgctl list" style="rounded=1;whiteSpace=wrap;html=1;fillColor=#dae8fc;strokeColor=#6c8ebf;align=left;spacingLeft=8;verticalAlign=middle;fontSize=11;" vertex="1" parent="n57"><mxGeometry x="18" y="474" width="344" height="34" as="geometry"/></mxCell>
<mxCell id="e74" value="" style="edgeStyle=orthogonalEdgeStyle;rounded=0;html=1;exitX=0.5;exitY=1;exitDx=0;exitDy=0;entryX=0.5;entryY=0;entryDx=0;entryDy=0;strokeColor=#4d4d4d;" edge="1" parent="1" source="n71" target="n73"><mxGeometry relative="1" as="geometry"/></mxCell>
<mxCell id="n75" value="&lt;b&gt;BMC USB Test&lt;/b&gt; 偵測 cdc_ncm 介面" style="rounded=1;whiteSpace=wrap;html=1;fillColor=#dae8fc;strokeColor=#6c8ebf;align=left;spacingLeft=8;verticalAlign=middle;fontSize=11;" vertex="1" parent="n57"><mxGeometry x="18" y="524" width="344" height="34" as="geometry"/></mxCell>
<mxCell id="e76" value="" style="edgeStyle=orthogonalEdgeStyle;rounded=0;html=1;exitX=0.5;exitY=1;exitDx=0;exitDy=0;entryX=0.5;entryY=0;entryDx=0;entryDy=0;strokeColor=#4d4d4d;" edge="1" parent="1" source="n73" target="n75"><mxGeometry relative="1" as="geometry"/></mxCell>
<mxCell id="n77" value="&lt;b&gt;:skip_ping&lt;/b&gt; &lt;b&gt;timeout = 0&lt;/b&gt;（還原全域逾時）" style="rounded=1;whiteSpace=wrap;html=1;fillColor=#f8cecc;strokeColor=#b85450;align=left;spacingLeft=8;verticalAlign=middle;fontSize=11;" vertex="1" parent="n57"><mxGeometry x="18" y="574" width="344" height="34" as="geometry"/></mxCell>
<mxCell id="e78" value="" style="edgeStyle=orthogonalEdgeStyle;rounded=0;html=1;exitX=0.5;exitY=1;exitDx=0;exitDy=0;entryX=0.5;entryY=0;entryDx=0;entryDy=0;strokeColor=#4d4d4d;" edge="1" parent="1" source="n75" target="n77"><mxGeometry relative="1" as="geometry"/></mxCell>
<mxCell id="n79" value="&lt;b&gt;10G/1G MGMT Ping&lt;/b&gt; start → status" style="rounded=1;whiteSpace=wrap;html=1;fillColor=#dae8fc;strokeColor=#6c8ebf;align=left;spacingLeft=8;verticalAlign=middle;fontSize=11;" vertex="1" parent="n57"><mxGeometry x="18" y="624" width="344" height="34" as="geometry"/></mxCell>
<mxCell id="e80" value="" style="edgeStyle=orthogonalEdgeStyle;rounded=0;html=1;exitX=0.5;exitY=1;exitDx=0;exitDy=0;entryX=0.5;entryY=0;entryDx=0;entryDy=0;strokeColor=#4d4d4d;" edge="1" parent="1" source="n77" target="n79"><mxGeometry relative="1" as="geometry"/></mxCell>
<mxCell id="n81" value="&lt;b&gt;NFC Test&lt;/b&gt; start → status" style="rounded=1;whiteSpace=wrap;html=1;fillColor=#dae8fc;strokeColor=#6c8ebf;align=left;spacingLeft=8;verticalAlign=middle;fontSize=11;" vertex="1" parent="n57"><mxGeometry x="18" y="674" width="344" height="34" as="geometry"/></mxCell>
<mxCell id="e82" value="" style="edgeStyle=orthogonalEdgeStyle;rounded=0;html=1;exitX=0.5;exitY=1;exitDx=0;exitDy=0;entryX=0.5;entryY=0;entryDx=0;entryDy=0;strokeColor=#4d4d4d;" edge="1" parent="1" source="n79" target="n81"><mxGeometry relative="1" as="geometry"/></mxCell>
<mxCell id="n83" value="&lt;b&gt;100G Port&lt;/b&gt; lpmode off · config interface startup" style="rounded=1;whiteSpace=wrap;html=1;fillColor=#dae8fc;strokeColor=#6c8ebf;align=left;spacingLeft=8;verticalAlign=middle;fontSize=11;" vertex="1" parent="n57"><mxGeometry x="18" y="724" width="344" height="34" as="geometry"/></mxCell>
<mxCell id="e84" value="" style="edgeStyle=orthogonalEdgeStyle;rounded=0;html=1;exitX=0.5;exitY=1;exitDx=0;exitDy=0;entryX=0.5;entryY=0;entryDx=0;entryDy=0;strokeColor=#4d4d4d;" edge="1" parent="1" source="n81" target="n83"><mxGeometry relative="1" as="geometry"/></mxCell>
<mxCell id="n85" value="&lt;b&gt;100G PRBS&lt;/b&gt; &lt;i&gt;整段註解 — bring-up 中&lt;/i&gt;" style="rounded=1;whiteSpace=wrap;html=1;fillColor=#f5f5f5;strokeColor=#999999;dashed=1;align=left;spacingLeft=8;verticalAlign=middle;fontSize=11;fontColor=#808080;" vertex="1" parent="n57"><mxGeometry x="18" y="774" width="344" height="34" as="geometry"/></mxCell>
<mxCell id="e86" value="" style="edgeStyle=orthogonalEdgeStyle;rounded=0;html=1;exitX=0.5;exitY=1;exitDx=0;exitDy=0;entryX=0.5;entryY=0;entryDx=0;entryDy=0;strokeColor=#4d4d4d;" edge="1" parent="1" source="n83" target="n85"><mxGeometry relative="1" as="geometry"/></mxCell>
<mxCell id="n87" value="&lt;b&gt;Traffic START&lt;/b&gt;&lt;br&gt;ps → init → clear → 15s → show → start&lt;br&gt;&lt;i&gt;⟨SWB_UNIT⟩ 兩邊 / -u 0 / -u 1 / skip&lt;/i&gt;" style="rounded=1;whiteSpace=wrap;html=1;fillColor=#fff2cc;strokeColor=#d6b656;align=left;spacingLeft=8;verticalAlign=middle;fontSize=11;" vertex="1" parent="n57"><mxGeometry x="18" y="824" width="344" height="64" as="geometry"/></mxCell>
<mxCell id="e88" value="" style="edgeStyle=orthogonalEdgeStyle;rounded=0;html=1;exitX=0.5;exitY=1;exitDx=0;exitDy=0;entryX=0.5;entryY=0;entryDx=0;entryDy=0;strokeColor=#4d4d4d;" edge="1" parent="1" source="n85" target="n87"><mxGeometry relative="1" as="geometry"/></mxCell>
<mxCell id="n89" value="&lt;b&gt;while 1 — soak 監控迴圈&lt;/b&gt;&lt;br&gt;setup_pmon.ttl（9 項）&lt;br&gt;bgctl list + jobs&lt;br&gt;&lt;b&gt;pause 60&lt;/b&gt;&lt;br&gt;&lt;i&gt;V1.1.4 起 margin 移到 Script C&lt;/i&gt;" style="rounded=1;whiteSpace=wrap;html=1;fillColor=#d5e8d4;strokeColor=#82b366;align=left;spacingLeft=8;verticalAlign=middle;fontSize=11;" vertex="1" parent="n57"><mxGeometry x="18" y="904" width="344" height="94" as="geometry"/></mxCell>
<mxCell id="e90" value="" style="edgeStyle=orthogonalEdgeStyle;rounded=0;html=1;exitX=0.5;exitY=1;exitDx=0;exitDy=0;entryX=0.5;entryY=0;entryDx=0;entryDy=0;strokeColor=#4d4d4d;" edge="1" parent="1" source="n87" target="n89"><mxGeometry relative="1" as="geometry"/></mxCell>
<mxCell id="n91" value="Script C — Post-test（收尾 / 判定 / 收 log）" style="swimlane;html=1;startSize=34;fillColor=#ffffff;strokeColor=#4d4d4d;fontSize=14;fontStyle=1;horizontal=1;" vertex="1" parent="1"><mxGeometry x="850" y="96" width="380" height="1259" as="geometry"/></mxCell>
<mxCell id="n92" value="&lt;b&gt;include config.ttl&lt;/b&gt;" style="rounded=1;whiteSpace=wrap;html=1;fillColor=#fff2cc;strokeColor=#d6b656;align=left;spacingLeft=8;verticalAlign=middle;fontSize=11;" vertex="1" parent="n91"><mxGeometry x="18" y="44" width="344" height="34" as="geometry"/></mxCell>
<mxCell id="n93" value="&lt;b&gt;Kill Process&lt;/b&gt; utils/kill_all_process.ttl&lt;br&gt;kill $(jobs -p) · bgctl stop --all ×2&lt;br&gt;停 BMC USB service · mgmt_ping stop · &lt;b&gt;nfc stop&lt;/b&gt;" style="rounded=1;whiteSpace=wrap;html=1;fillColor=#f8cecc;strokeColor=#b85450;align=left;spacingLeft=8;verticalAlign=middle;fontSize=11;" vertex="1" parent="n91"><mxGeometry x="18" y="94" width="344" height="64" as="geometry"/></mxCell>
<mxCell id="e94" value="" style="edgeStyle=orthogonalEdgeStyle;rounded=0;html=1;exitX=0.5;exitY=1;exitDx=0;exitDy=0;entryX=0.5;entryY=0;entryDx=0;entryDy=0;strokeColor=#4d4d4d;" edge="1" parent="1" source="n92" target="n93"><mxGeometry relative="1" as="geometry"/></mxCell>
<mxCell id="n95" value="&lt;b&gt;100G PRBS STOP&lt;/b&gt; &lt;i&gt;整段註解&lt;/i&gt;" style="rounded=1;whiteSpace=wrap;html=1;fillColor=#f5f5f5;strokeColor=#999999;dashed=1;align=left;spacingLeft=8;verticalAlign=middle;fontSize=11;fontColor=#808080;" vertex="1" parent="n91"><mxGeometry x="18" y="174" width="344" height="34" as="geometry"/></mxCell>
<mxCell id="e96" value="" style="edgeStyle=orthogonalEdgeStyle;rounded=0;html=1;exitX=0.5;exitY=1;exitDx=0;exitDy=0;entryX=0.5;entryY=0;entryDx=0;entryDy=0;strokeColor=#4d4d4d;" edge="1" parent="1" source="n93" target="n95"><mxGeometry relative="1" as="geometry"/></mxCell>
<mxCell id="n97" value="&lt;b&gt;TAKE DATA&lt;/b&gt; setup_pmon.ttl + show_dmesg.ttl" style="rounded=1;whiteSpace=wrap;html=1;fillColor=#dae8fc;strokeColor=#6c8ebf;align=left;spacingLeft=8;verticalAlign=middle;fontSize=11;" vertex="1" parent="n91"><mxGeometry x="18" y="224" width="344" height="34" as="geometry"/></mxCell>
<mxCell id="e98" value="" style="edgeStyle=orthogonalEdgeStyle;rounded=0;html=1;exitX=0.5;exitY=1;exitDx=0;exitDy=0;entryX=0.5;entryY=0;entryDx=0;entryDy=0;strokeColor=#4d4d4d;" edge="1" parent="1" source="n95" target="n97"><mxGeometry relative="1" as="geometry"/></mxCell>
<mxCell id="n99" value="&lt;b&gt;Check PCIe error counters&lt;/b&gt; ×7（同 Script A）" style="rounded=1;whiteSpace=wrap;html=1;fillColor=#dae8fc;strokeColor=#6c8ebf;align=left;spacingLeft=8;verticalAlign=middle;fontSize=11;" vertex="1" parent="n91"><mxGeometry x="18" y="274" width="344" height="34" as="geometry"/></mxCell>
<mxCell id="e100" value="" style="edgeStyle=orthogonalEdgeStyle;rounded=0;html=1;exitX=0.5;exitY=1;exitDx=0;exitDy=0;entryX=0.5;entryY=0;entryDx=0;entryDy=0;strokeColor=#4d4d4d;" edge="1" parent="1" source="n97" target="n99"><mxGeometry relative="1" as="geometry"/></mxCell>
<mxCell id="n101" value="&lt;b&gt;BMC DDR / BMC Monitor 取值&lt;/b&gt; cat bmc_ddr.log · bmc_poll.log" style="rounded=1;whiteSpace=wrap;html=1;fillColor=#dae8fc;strokeColor=#6c8ebf;align=left;spacingLeft=8;verticalAlign=middle;fontSize=11;" vertex="1" parent="n91"><mxGeometry x="18" y="324" width="344" height="34" as="geometry"/></mxCell>
<mxCell id="e102" value="" style="edgeStyle=orthogonalEdgeStyle;rounded=0;html=1;exitX=0.5;exitY=1;exitDx=0;exitDy=0;entryX=0.5;entryY=0;entryDx=0;entryDy=0;strokeColor=#4d4d4d;" edge="1" parent="1" source="n99" target="n101"><mxGeometry relative="1" as="geometry"/></mxCell>
<mxCell id="n103" value="&lt;b&gt;BMC USB Test result&lt;/b&gt; journalctl" style="rounded=1;whiteSpace=wrap;html=1;fillColor=#dae8fc;strokeColor=#6c8ebf;align=left;spacingLeft=8;verticalAlign=middle;fontSize=11;" vertex="1" parent="n91"><mxGeometry x="18" y="374" width="344" height="34" as="geometry"/></mxCell>
<mxCell id="e104" value="" style="edgeStyle=orthogonalEdgeStyle;rounded=0;html=1;exitX=0.5;exitY=1;exitDx=0;exitDy=0;entryX=0.5;entryY=0;entryDx=0;entryDy=0;strokeColor=#4d4d4d;" edge="1" parent="1" source="n101" target="n103"><mxGeometry relative="1" as="geometry"/></mxCell>
<mxCell id="n105" value="&lt;b&gt;CHECK Stress results&lt;/b&gt;&lt;br&gt;cat mlucas / memtester / ssd / usb log" style="rounded=1;whiteSpace=wrap;html=1;fillColor=#dae8fc;strokeColor=#6c8ebf;align=left;spacingLeft=8;verticalAlign=middle;fontSize=11;" vertex="1" parent="n91"><mxGeometry x="18" y="424" width="344" height="49" as="geometry"/></mxCell>
<mxCell id="e106" value="" style="edgeStyle=orthogonalEdgeStyle;rounded=0;html=1;exitX=0.5;exitY=1;exitDx=0;exitDy=0;entryX=0.5;entryY=0;entryDx=0;entryDy=0;strokeColor=#4d4d4d;" edge="1" parent="1" source="n103" target="n105"><mxGeometry relative="1" as="geometry"/></mxCell>
<mxCell id="n107" value="&lt;b&gt;10G/1G MGMT result&lt;/b&gt; ip -s link show eth0/eth1 · cat log" style="rounded=1;whiteSpace=wrap;html=1;fillColor=#dae8fc;strokeColor=#6c8ebf;align=left;spacingLeft=8;verticalAlign=middle;fontSize=11;" vertex="1" parent="n91"><mxGeometry x="18" y="489" width="344" height="34" as="geometry"/></mxCell>
<mxCell id="e108" value="" style="edgeStyle=orthogonalEdgeStyle;rounded=0;html=1;exitX=0.5;exitY=1;exitDx=0;exitDy=0;entryX=0.5;entryY=0;entryDx=0;entryDy=0;strokeColor=#4d4d4d;" edge="1" parent="1" source="n105" target="n107"><mxGeometry relative="1" as="geometry"/></mxCell>
<mxCell id="n109" value="&lt;b&gt;NFC Test result&lt;/b&gt; nfc_polling.sh report" style="rounded=1;whiteSpace=wrap;html=1;fillColor=#dae8fc;strokeColor=#6c8ebf;align=left;spacingLeft=8;verticalAlign=middle;fontSize=11;" vertex="1" parent="n91"><mxGeometry x="18" y="539" width="344" height="34" as="geometry"/></mxCell>
<mxCell id="e110" value="" style="edgeStyle=orthogonalEdgeStyle;rounded=0;html=1;exitX=0.5;exitY=1;exitDx=0;exitDy=0;entryX=0.5;entryY=0;entryDx=0;entryDy=0;strokeColor=#4d4d4d;" edge="1" parent="1" source="n107" target="n109"><mxGeometry relative="1" as="geometry"/></mxCell>
<mxCell id="n111" value="&lt;b&gt;100G Port&lt;/b&gt; show interfaces status" style="rounded=1;whiteSpace=wrap;html=1;fillColor=#dae8fc;strokeColor=#6c8ebf;align=left;spacingLeft=8;verticalAlign=middle;fontSize=11;" vertex="1" parent="n91"><mxGeometry x="18" y="589" width="344" height="34" as="geometry"/></mxCell>
<mxCell id="e112" value="" style="edgeStyle=orthogonalEdgeStyle;rounded=0;html=1;exitX=0.5;exitY=1;exitDx=0;exitDy=0;entryX=0.5;entryY=0;entryDx=0;entryDy=0;strokeColor=#4d4d4d;" edge="1" parent="1" source="n109" target="n111"><mxGeometry relative="1" as="geometry"/></mxCell>
<mxCell id="n113" value="&lt;b&gt;CHECK Traffic counters&lt;/b&gt;&lt;br&gt;stop → report（per-pair TX/RX + ce0）&lt;br&gt;&lt;i&gt;⟨SWB_UNIT⟩ 兩邊 / -u 0 / -u 1 / skip&lt;/i&gt;" style="rounded=1;whiteSpace=wrap;html=1;fillColor=#fff2cc;strokeColor=#d6b656;align=left;spacingLeft=8;verticalAlign=middle;fontSize=11;" vertex="1" parent="n91"><mxGeometry x="18" y="639" width="344" height="64" as="geometry"/></mxCell>
<mxCell id="e114" value="" style="edgeStyle=orthogonalEdgeStyle;rounded=0;html=1;exitX=0.5;exitY=1;exitDx=0;exitDy=0;entryX=0.5;entryY=0;entryDx=0;entryDy=0;strokeColor=#4d4d4d;" edge="1" parent="1" source="n111" target="n113"><mxGeometry relative="1" as="geometry"/></mxCell>
<mxCell id="n115" value="&lt;b&gt;BER 掃描&lt;/b&gt; blanton_ber.sh&lt;br&gt;init → start → &lt;b&gt;sleep 30&lt;/b&gt; → report → stop → clear&lt;br&gt;&lt;i&gt;⟨SWB_UNIT⟩ · sleep 30 要與 BER_INTERVAL 同步&lt;/i&gt;" style="rounded=1;whiteSpace=wrap;html=1;fillColor=#fff2cc;strokeColor=#d6b656;align=left;spacingLeft=8;verticalAlign=middle;fontSize=11;" vertex="1" parent="n91"><mxGeometry x="18" y="719" width="344" height="64" as="geometry"/></mxCell>
<mxCell id="e116" value="" style="edgeStyle=orthogonalEdgeStyle;rounded=0;html=1;exitX=0.5;exitY=1;exitDx=0;exitDy=0;entryX=0.5;entryY=0;entryDx=0;entryDy=0;strokeColor=#4d4d4d;" edge="1" parent="1" source="n113" target="n115"><mxGeometry relative="1" as="geometry"/></mxCell>
<mxCell id="n117" value="&lt;b&gt;NVMe Err Info&lt;/b&gt; nvme smart-log · smartctl -x" style="rounded=1;whiteSpace=wrap;html=1;fillColor=#dae8fc;strokeColor=#6c8ebf;align=left;spacingLeft=8;verticalAlign=middle;fontSize=11;" vertex="1" parent="n91"><mxGeometry x="18" y="799" width="344" height="34" as="geometry"/></mxCell>
<mxCell id="e118" value="" style="edgeStyle=orthogonalEdgeStyle;rounded=0;html=1;exitX=0.5;exitY=1;exitDx=0;exitDy=0;entryX=0.5;entryY=0;entryDx=0;entryDy=0;strokeColor=#4d4d4d;" edge="1" parent="1" source="n115" target="n117"><mxGeometry relative="1" as="geometry"/></mxCell>
<mxCell id="n119" value="&lt;b&gt;show reboot-cause&lt;/b&gt;" style="rounded=1;whiteSpace=wrap;html=1;fillColor=#dae8fc;strokeColor=#6c8ebf;align=left;spacingLeft=8;verticalAlign=middle;fontSize=11;" vertex="1" parent="n91"><mxGeometry x="18" y="849" width="344" height="34" as="geometry"/></mxCell>
<mxCell id="e120" value="" style="edgeStyle=orthogonalEdgeStyle;rounded=0;html=1;exitX=0.5;exitY=1;exitDx=0;exitDy=0;entryX=0.5;entryY=0;entryDx=0;entryDy=0;strokeColor=#4d4d4d;" edge="1" parent="1" source="n117" target="n119"><mxGeometry relative="1" as="geometry"/></mxCell>
<mxCell id="n121" value="&lt;b&gt;Check Margin&lt;/b&gt; margin_status_all.sh（9 顆）&lt;br&gt;&lt;i&gt;⟨EN_Margin = 1⟩ · V1.1.4 從 Script B 移來&lt;/i&gt;" style="rounded=1;whiteSpace=wrap;html=1;fillColor=#fff2cc;strokeColor=#d6b656;align=left;spacingLeft=8;verticalAlign=middle;fontSize=11;" vertex="1" parent="n91"><mxGeometry x="18" y="899" width="344" height="49" as="geometry"/></mxCell>
<mxCell id="e122" value="" style="edgeStyle=orthogonalEdgeStyle;rounded=0;html=1;exitX=0.5;exitY=1;exitDx=0;exitDy=0;entryX=0.5;entryY=0;entryDx=0;entryDy=0;strokeColor=#4d4d4d;" edge="1" parent="1" source="n119" target="n121"><mxGeometry relative="1" as="geometry"/></mxCell>
<mxCell id="n123" value="&lt;b&gt;show uptime&lt;/b&gt;" style="rounded=1;whiteSpace=wrap;html=1;fillColor=#dae8fc;strokeColor=#6c8ebf;align=left;spacingLeft=8;verticalAlign=middle;fontSize=11;" vertex="1" parent="n91"><mxGeometry x="18" y="964" width="344" height="34" as="geometry"/></mxCell>
<mxCell id="e124" value="" style="edgeStyle=orthogonalEdgeStyle;rounded=0;html=1;exitX=0.5;exitY=1;exitDx=0;exitDy=0;entryX=0.5;entryY=0;entryDx=0;entryDy=0;strokeColor=#4d4d4d;" edge="1" parent="1" source="n121" target="n123"><mxGeometry relative="1" as="geometry"/></mxCell>
<mxCell id="n125" value="&lt;b&gt;Copy Stress Log to USB&lt;/b&gt;&lt;br&gt;usb_target.sh → mount → cp 各 log 進 jobs/&lt;br&gt;→ 帶時戳複製到 /mnt/usb/" style="rounded=1;whiteSpace=wrap;html=1;fillColor=#dae8fc;strokeColor=#6c8ebf;align=left;spacingLeft=8;verticalAlign=middle;fontSize=11;" vertex="1" parent="n91"><mxGeometry x="18" y="1014" width="344" height="64" as="geometry"/></mxCell>
<mxCell id="e126" value="" style="edgeStyle=orthogonalEdgeStyle;rounded=0;html=1;exitX=0.5;exitY=1;exitDx=0;exitDy=0;entryX=0.5;entryY=0;entryDx=0;entryDy=0;strokeColor=#4d4d4d;" edge="1" parent="1" source="n123" target="n125"><mxGeometry relative="1" as="geometry"/></mxCell>
<mxCell id="n127" value="&lt;b&gt;exit&lt;/b&gt; → wait 『Script done』&lt;br&gt;離開 hw-test-session 的 shell" style="rounded=1;whiteSpace=wrap;html=1;fillColor=#dae8fc;strokeColor=#6c8ebf;align=left;spacingLeft=8;verticalAlign=middle;fontSize=11;" vertex="1" parent="n91"><mxGeometry x="18" y="1094" width="344" height="49" as="geometry"/></mxCell>
<mxCell id="e128" value="" style="edgeStyle=orthogonalEdgeStyle;rounded=0;html=1;exitX=0.5;exitY=1;exitDx=0;exitDy=0;entryX=0.5;entryY=0;entryDx=0;entryDy=0;strokeColor=#4d4d4d;" edge="1" parent="1" source="n125" target="n127"><mxGeometry relative="1" as="geometry"/></mxCell>
<mxCell id="n129" value="&lt;b&gt;hw-test-session finish&lt;/b&gt; · bgctl reset --yes" style="rounded=1;whiteSpace=wrap;html=1;fillColor=#dae8fc;strokeColor=#6c8ebf;align=left;spacingLeft=8;verticalAlign=middle;fontSize=11;" vertex="1" parent="n91"><mxGeometry x="18" y="1159" width="344" height="34" as="geometry"/></mxCell>
<mxCell id="e130" value="" style="edgeStyle=orthogonalEdgeStyle;rounded=0;html=1;exitX=0.5;exitY=1;exitDx=0;exitDy=0;entryX=0.5;entryY=0;entryDx=0;entryDy=0;strokeColor=#4d4d4d;" edge="1" parent="1" source="n127" target="n129"><mxGeometry relative="1" as="geometry"/></mxCell>
<mxCell id="n131" value="messagebox 『GOOD JOB! Test Case DONE』" style="rounded=1;whiteSpace=wrap;html=1;fillColor=#ffe6cc;strokeColor=#d79b00;align=center;verticalAlign=middle;fontSize=11;fontStyle=1;" vertex="1" parent="n91"><mxGeometry x="18" y="1209" width="344" height="34" as="geometry"/></mxCell>
<mxCell id="e132" value="" style="edgeStyle=orthogonalEdgeStyle;rounded=0;html=1;exitX=0.5;exitY=1;exitDx=0;exitDy=0;entryX=0.5;entryY=0;entryDx=0;entryDy=0;strokeColor=#4d4d4d;" edge="1" parent="1" source="n129" target="n131"><mxGeometry relative="1" as="geometry"/></mxCell>
<mxCell id="n133" value="Script 4 — Thermal &amp;amp; Safety（獨立跑，不接 A/B/C）" style="swimlane;html=1;startSize=34;fillColor=#ffffff;strokeColor=#4d4d4d;fontSize=14;fontStyle=1;horizontal=1;" vertex="1" parent="1"><mxGeometry x="1260" y="96" width="380" height="929" as="geometry"/></mxCell>
<mxCell id="n134" value="&lt;b&gt;include config.ttl&lt;/b&gt;" style="rounded=1;whiteSpace=wrap;html=1;fillColor=#fff2cc;strokeColor=#d6b656;align=left;spacingLeft=8;verticalAlign=middle;fontSize=11;" vertex="1" parent="n133"><mxGeometry x="18" y="44" width="344" height="34" as="geometry"/></mxCell>
<mxCell id="n135" value="&lt;b&gt;logopen&lt;/b&gt; &lt;i&gt;⟨EN_log = 1⟩&lt;/i&gt;" style="rounded=1;whiteSpace=wrap;html=1;fillColor=#fff2cc;strokeColor=#d6b656;align=left;spacingLeft=8;verticalAlign=middle;fontSize=11;" vertex="1" parent="n133"><mxGeometry x="18" y="94" width="344" height="34" as="geometry"/></mxCell>
<mxCell id="e136" value="" style="edgeStyle=orthogonalEdgeStyle;rounded=0;html=1;exitX=0.5;exitY=1;exitDx=0;exitDy=0;entryX=0.5;entryY=0;entryDx=0;entryDy=0;strokeColor=#4d4d4d;" edge="1" parent="1" source="n134" target="n135"><mxGeometry relative="1" as="geometry"/></mxCell>
<mxCell id="n137" value="&lt;b&gt;Root Login&lt;/b&gt; → sudo -i" style="rounded=1;whiteSpace=wrap;html=1;fillColor=#dae8fc;strokeColor=#6c8ebf;align=left;spacingLeft=8;verticalAlign=middle;fontSize=11;" vertex="1" parent="n133"><mxGeometry x="18" y="144" width="344" height="34" as="geometry"/></mxCell>
<mxCell id="e138" value="" style="edgeStyle=orthogonalEdgeStyle;rounded=0;html=1;exitX=0.5;exitY=1;exitDx=0;exitDy=0;entryX=0.5;entryY=0;entryDx=0;entryDy=0;strokeColor=#4d4d4d;" edge="1" parent="1" source="n135" target="n137"><mxGeometry relative="1" as="geometry"/></mxCell>
<mxCell id="n139" value="&lt;b&gt;Pre Setting&lt;/b&gt; mkdir ./logs · date -s · rm jobs/*" style="rounded=1;whiteSpace=wrap;html=1;fillColor=#dae8fc;strokeColor=#6c8ebf;align=left;spacingLeft=8;verticalAlign=middle;fontSize=11;" vertex="1" parent="n133"><mxGeometry x="18" y="194" width="344" height="34" as="geometry"/></mxCell>
<mxCell id="e140" value="" style="edgeStyle=orthogonalEdgeStyle;rounded=0;html=1;exitX=0.5;exitY=1;exitDx=0;exitDy=0;entryX=0.5;entryY=0;entryDx=0;entryDy=0;strokeColor=#4d4d4d;" edge="1" parent="1" source="n137" target="n139"><mxGeometry relative="1" as="geometry"/></mxCell>
<mxCell id="n141" value="&lt;b&gt;HW Test Session&lt;/b&gt; finish → bgctl reset/stop --all → list&lt;br&gt;→ start → log → status" style="rounded=1;whiteSpace=wrap;html=1;fillColor=#f8cecc;strokeColor=#b85450;align=left;spacingLeft=8;verticalAlign=middle;fontSize=11;" vertex="1" parent="n133"><mxGeometry x="18" y="244" width="344" height="49" as="geometry"/></mxCell>
<mxCell id="e142" value="" style="edgeStyle=orthogonalEdgeStyle;rounded=0;html=1;exitX=0.5;exitY=1;exitDx=0;exitDy=0;entryX=0.5;entryY=0;entryDx=0;entryDy=0;strokeColor=#4d4d4d;" edge="1" parent="1" source="n139" target="n141"><mxGeometry relative="1" as="geometry"/></mxCell>
<mxCell id="n143" value="&lt;b&gt;FAN SPEED&lt;/b&gt; max31790 rebind ×2 → fan-speed-control.sh" style="rounded=1;whiteSpace=wrap;html=1;fillColor=#dae8fc;strokeColor=#6c8ebf;align=left;spacingLeft=8;verticalAlign=middle;fontSize=11;" vertex="1" parent="n133"><mxGeometry x="18" y="309" width="344" height="34" as="geometry"/></mxCell>
<mxCell id="e144" value="" style="edgeStyle=orthogonalEdgeStyle;rounded=0;html=1;exitX=0.5;exitY=1;exitDx=0;exitDy=0;entryX=0.5;entryY=0;entryDx=0;entryDy=0;strokeColor=#4d4d4d;" edge="1" parent="1" source="n141" target="n143"><mxGeometry relative="1" as="geometry"/></mxCell>
<mxCell id="n145" value="&lt;b&gt;Wait DUT Init&lt;/b&gt; utils/wait_init.ttl&lt;br&gt;&lt;i&gt;無逾時出口&lt;/i&gt;" style="rounded=1;whiteSpace=wrap;html=1;fillColor=#fff2cc;strokeColor=#d6b656;align=left;spacingLeft=8;verticalAlign=middle;fontSize=11;" vertex="1" parent="n133"><mxGeometry x="18" y="359" width="344" height="49" as="geometry"/></mxCell>
<mxCell id="e146" value="" style="edgeStyle=orthogonalEdgeStyle;rounded=0;html=1;exitX=0.5;exitY=1;exitDx=0;exitDy=0;entryX=0.5;entryY=0;entryDx=0;entryDy=0;strokeColor=#4d4d4d;" edge="1" parent="1" source="n143" target="n145"><mxGeometry relative="1" as="geometry"/></mxCell>
<mxCell id="n147" value="&lt;b&gt;DUT Info&lt;/b&gt; boot/version/fwutil/system-memory/service&lt;br&gt;syseeprom · ssdhealth · TPM · NVMe" style="rounded=1;whiteSpace=wrap;html=1;fillColor=#dae8fc;strokeColor=#6c8ebf;align=left;spacingLeft=8;verticalAlign=middle;fontSize=11;" vertex="1" parent="n133"><mxGeometry x="18" y="424" width="344" height="49" as="geometry"/></mxCell>
<mxCell id="e148" value="" style="edgeStyle=orthogonalEdgeStyle;rounded=0;html=1;exitX=0.5;exitY=1;exitDx=0;exitDy=0;entryX=0.5;entryY=0;entryDx=0;entryDy=0;strokeColor=#4d4d4d;" edge="1" parent="1" source="n145" target="n147"><mxGeometry relative="1" as="geometry"/></mxCell>
<mxCell id="n149" value="&lt;b&gt;BMC&lt;/b&gt; enroll · version · status" style="rounded=1;whiteSpace=wrap;html=1;fillColor=#dae8fc;strokeColor=#6c8ebf;align=left;spacingLeft=8;verticalAlign=middle;fontSize=11;" vertex="1" parent="n133"><mxGeometry x="18" y="489" width="344" height="34" as="geometry"/></mxCell>
<mxCell id="e150" value="" style="edgeStyle=orthogonalEdgeStyle;rounded=0;html=1;exitX=0.5;exitY=1;exitDx=0;exitDy=0;entryX=0.5;entryY=0;entryDx=0;entryDy=0;strokeColor=#4d4d4d;" edge="1" parent="1" source="n147" target="n149"><mxGeometry relative="1" as="geometry"/></mxCell>
<mxCell id="n151" value="&lt;b&gt;CLEAR PCIe Error&lt;/b&gt; ×7 + ras-mc-ctl --summary" style="rounded=1;whiteSpace=wrap;html=1;fillColor=#dae8fc;strokeColor=#6c8ebf;align=left;spacingLeft=8;verticalAlign=middle;fontSize=11;" vertex="1" parent="n133"><mxGeometry x="18" y="539" width="344" height="34" as="geometry"/></mxCell>
<mxCell id="e152" value="" style="edgeStyle=orthogonalEdgeStyle;rounded=0;html=1;exitX=0.5;exitY=1;exitDx=0;exitDy=0;entryX=0.5;entryY=0;entryDx=0;entryDy=0;strokeColor=#4d4d4d;" edge="1" parent="1" source="n149" target="n151"><mxGeometry relative="1" as="geometry"/></mxCell>
<mxCell id="n153" value="&lt;b&gt;PCIe tree / link / bandwidth&lt;/b&gt;" style="rounded=1;whiteSpace=wrap;html=1;fillColor=#dae8fc;strokeColor=#6c8ebf;align=left;spacingLeft=8;verticalAlign=middle;fontSize=11;" vertex="1" parent="n133"><mxGeometry x="18" y="589" width="344" height="34" as="geometry"/></mxCell>
<mxCell id="e154" value="" style="edgeStyle=orthogonalEdgeStyle;rounded=0;html=1;exitX=0.5;exitY=1;exitDx=0;exitDy=0;entryX=0.5;entryY=0;entryDx=0;entryDy=0;strokeColor=#4d4d4d;" edge="1" parent="1" source="n151" target="n153"><mxGeometry relative="1" as="geometry"/></mxCell>
<mxCell id="n155" value="&lt;b&gt;TAKE DATA&lt;/b&gt; setup_pmon.ttl + show_dmesg.ttl" style="rounded=1;whiteSpace=wrap;html=1;fillColor=#dae8fc;strokeColor=#6c8ebf;align=left;spacingLeft=8;verticalAlign=middle;fontSize=11;" vertex="1" parent="n133"><mxGeometry x="18" y="639" width="344" height="34" as="geometry"/></mxCell>
<mxCell id="e156" value="" style="edgeStyle=orthogonalEdgeStyle;rounded=0;html=1;exitX=0.5;exitY=1;exitDx=0;exitDy=0;entryX=0.5;entryY=0;entryDx=0;entryDy=0;strokeColor=#4d4d4d;" edge="1" parent="1" source="n153" target="n155"><mxGeometry relative="1" as="geometry"/></mxCell>
<mxCell id="n157" value="&lt;b&gt;Full Load — CPU&lt;/b&gt;&lt;br&gt;chmod +x → mlucas-avx2 -s l -cpu 0:15 &amp;amp;" style="rounded=1;whiteSpace=wrap;html=1;fillColor=#dae8fc;strokeColor=#6c8ebf;align=left;spacingLeft=8;verticalAlign=middle;fontSize=11;" vertex="1" parent="n133"><mxGeometry x="18" y="689" width="344" height="49" as="geometry"/></mxCell>
<mxCell id="e158" value="" style="edgeStyle=orthogonalEdgeStyle;rounded=0;html=1;exitX=0.5;exitY=1;exitDx=0;exitDy=0;entryX=0.5;entryY=0;entryDx=0;entryDy=0;strokeColor=#4d4d4d;" edge="1" parent="1" source="n155" target="n157"><mxGeometry relative="1" as="geometry"/></mxCell>
<mxCell id="n159" value="&lt;b&gt;Full Load — 資料面&lt;/b&gt;&lt;br&gt;blanton_tr518.sh start（含 120s settle）" style="rounded=1;whiteSpace=wrap;html=1;fillColor=#f8cecc;strokeColor=#b85450;align=left;spacingLeft=8;verticalAlign=middle;fontSize=11;" vertex="1" parent="n133"><mxGeometry x="18" y="754" width="344" height="49" as="geometry"/></mxCell>
<mxCell id="e160" value="" style="edgeStyle=orthogonalEdgeStyle;rounded=0;html=1;exitX=0.5;exitY=1;exitDx=0;exitDy=0;entryX=0.5;entryY=0;entryDx=0;entryDy=0;strokeColor=#4d4d4d;" edge="1" parent="1" source="n157" target="n159"><mxGeometry relative="1" as="geometry"/></mxCell>
<mxCell id="n161" value="&lt;b&gt;while 1 — 熱 / 安規監控迴圈&lt;/b&gt;&lt;br&gt;setup_pmon.ttl（9 項）&lt;br&gt;TH6_SWB0 / SWB1_power_readback.sh&lt;br&gt;bgctl list + jobs&lt;br&gt;&lt;b&gt;pause 60&lt;/b&gt;" style="rounded=1;whiteSpace=wrap;html=1;fillColor=#d5e8d4;strokeColor=#82b366;align=left;spacingLeft=8;verticalAlign=middle;fontSize=11;" vertex="1" parent="n133"><mxGeometry x="18" y="819" width="344" height="94" as="geometry"/></mxCell>
<mxCell id="e162" value="" style="edgeStyle=orthogonalEdgeStyle;rounded=0;html=1;exitX=0.5;exitY=1;exitDx=0;exitDy=0;entryX=0.5;entryY=0;entryDx=0;entryDy=0;strokeColor=#4d4d4d;" edge="1" parent="1" source="n159" target="n161"><mxGeometry relative="1" as="geometry"/></mxCell>
<mxCell id="e163" value="人工啟動 Script B" style="edgeStyle=orthogonalEdgeStyle;rounded=1;html=1;strokeColor=#d79b00;strokeWidth=2;dashed=1;fontSize=10;fontColor=#d79b00;" edge="1" parent="1" source="n55" target="n58"><mxGeometry relative="1" as="geometry"/></mxCell>
<mxCell id="e164" value="soak 結束後人工中斷，啟動 Script C" style="edgeStyle=orthogonalEdgeStyle;rounded=1;html=1;strokeColor=#d79b00;strokeWidth=2;dashed=1;fontSize=10;fontColor=#d79b00;" edge="1" parent="1" source="n89" target="n92"><mxGeometry relative="1" as="geometry"/></mxCell>
<mxCell id="n165" value="圖例" style="text;html=1;align=left;verticalAlign=middle;fontSize=13;fontStyle=1;" vertex="1" parent="1"><mxGeometry x="30" y="1585" width="200" height="24" as="geometry"/></mxCell>
<mxCell id="n166" value="一般步驟" style="rounded=1;whiteSpace=wrap;html=1;fillColor=#dae8fc;strokeColor=#6c8ebf;align=left;spacingLeft=8;verticalAlign=middle;fontSize=11;" vertex="1" parent="1"><mxGeometry x="30" y="1613" width="230" height="32" as="geometry"/></mxCell>
<mxCell id="n167" value="受 config.ttl 旗標影響" style="rounded=1;whiteSpace=wrap;html=1;fillColor=#fff2cc;strokeColor=#d6b656;align=left;spacingLeft=8;verticalAlign=middle;fontSize=11;" vertex="1" parent="1"><mxGeometry x="280" y="1613" width="230" height="32" as="geometry"/></mxCell>
<mxCell id="n168" value="迴圈 / 持續執行" style="rounded=1;whiteSpace=wrap;html=1;fillColor=#d5e8d4;strokeColor=#82b366;align=left;spacingLeft=8;verticalAlign=middle;fontSize=11;" vertex="1" parent="1"><mxGeometry x="530" y="1613" width="230" height="32" as="geometry"/></mxCell>
<mxCell id="n169" value="目前註解停用" style="rounded=1;whiteSpace=wrap;html=1;fillColor=#f5f5f5;strokeColor=#999999;dashed=1;align=left;spacingLeft=8;verticalAlign=middle;fontSize=11;fontColor=#808080;" vertex="1" parent="1"><mxGeometry x="30" y="1655" width="230" height="32" as="geometry"/></mxCell>
<mxCell id="n170" value="狀態變更 / 需留意" style="rounded=1;whiteSpace=wrap;html=1;fillColor=#f8cecc;strokeColor=#b85450;align=left;spacingLeft=8;verticalAlign=middle;fontSize=11;" vertex="1" parent="1"><mxGeometry x="280" y="1655" width="230" height="32" as="geometry"/></mxCell>
<mxCell id="n171" value="人工交接點" style="rounded=1;whiteSpace=wrap;html=1;fillColor=#ffe6cc;strokeColor=#d79b00;align=center;verticalAlign=middle;fontSize=11;fontStyle=1;" vertex="1" parent="1"><mxGeometry x="530" y="1655" width="230" height="32" as="geometry"/></mxCell>
<mxCell id="n172" value="⚠️ 已知待辦：① 100G PRBS 三支腳本內呼叫仍註解（bring-up 中）　② wait_init.ttl 與風扇確認 wait 沒有逾時出口，起不來會無限等待　③ Script C 的 sleep 30 需與 blanton_ber.sh 的 BER_INTERVAL 同步　④ Script 4 沒有收尾段：中斷後 tr518 留下 port cd lb=mac / l2 learn off / test mode nr=yes，需手動 blanton_tr518.sh stop" style="text;html=1;align=left;verticalAlign=top;fontSize=11;fontColor=#b85450;" vertex="1" parent="1"><mxGeometry x="30" y="1703" width="1610" height="46" as="geometry"/></mxCell>
</root>
</mxGraphModel>
</diagram>
</mxfile>
docs/LTC2980_channel_map.csv
+145
View File
@@ -0,0 +1,145 @@
Board,CONN,Ch,NetName,Vnom
CB,CONN13,CH0,V5P0_ALW,5.0
CB,CONN13,CH1,V3P3_ALW,3.3
CB,CONN13,CH2,PWR_VDD_MISC_ALW,0.75
CB,CONN13,CH3,V1P8_ALW,1.8
CB,CONN13,CH4,PWR_APU_VDDIO_SUS,1.1
CB,CONN13,CH5,PWR_VDD_MISC_RUN,0.75
CB,CONN13,CH6,PWR_APU_VDD_MEM_RUN,0.78
CB,CONN13,CH7,V0P8_PHY2_DVDD,0.816
CB,CONN13,CH8,V0P8_AVDD,0.8
CB,CONN13,CH9,V0P8_PHY,0.8
CB,CONN13,CH10,V1P8_FPGA,1.8
CB,CONN13,CH11,V2P5_FPGA,2.5
CB,CONN13,CH12,V1P1_FPGA,1.1
CB,CONN13,CH13,P5V_STBY,5.0
CB,CONN13,CH14,P3V3_STBY,3.3
CB,CONN13,CH15,V0P8_PHY2_AVDD,0.816
SWB0,CONN13,CH0,P0V75_DVDD_47,0.75
SWB0,CONN13,CH1,P0V75_AVDD_47,0.756
SWB0,CONN13,CH2,P1V5_AVDD_47,1.524
SWB0,CONN13,CH3,P0V9_AVDD_47,0.915
SWB0,CONN13,CH4,P1V8_1,1.816
SWB0,CONN13,CH5,PVDD3_3V_SYNTH_LDO_A3,3.38
SWB0,CONN13,CH6,PVDD3_3V_SYNTH_LDO_B1,3.38
SWB0,CONN13,CH7,P1V8_3,1.816
SWB0,CONN13,CH8,P1V8_DVDDIO_3,1.8
SWB0,CONN13,CH9,P0V75_DVDD_39,0.75
SWB0,CONN13,CH10,P0V75_AVDD_39,0.756
SWB0,CONN13,CH11,P1V5_AVDD_39,1.524
SWB0,CONN13,CH12,P0V9_AVDD_39,0.915
SWB0,CONN13,CH13,PVDD1V5_2,1.5
SWB0,CONN13,CH14,PVDD1V8_DUT,1.8
SWB0,CONN13,CH15,PVDD_MDIO,1.2
SWB0,CONN14,CH0,P0V75_AVDD_7,0.756
SWB0,CONN14,CH1,P1V5_AVDD_7,1.524
SWB0,CONN14,CH2,P0V9_AVDD_7,0.915
SWB0,CONN14,CH3,P1V8_5,1.816
SWB0,CONN14,CH4,P1V8_2,1.816
SWB0,CONN14,CH5,PVDD3_3V_SYNTH_LDO_B2,3.38
SWB0,CONN14,CH6,PVDD3_3V_SYNTH_LDO_A2,3.38
SWB0,CONN14,CH7,PVDD3_3V_SYNTH_LDO_A1,3.38
SWB0,CONN14,CH8,PVDD1V5_TSC,1.516
SWB0,CONN14,CH9,PVDD1V5_ANLG,1.516
SWB0,CONN14,CH10,NC,-
SWB0,CONN14,CH11,NC,-
SWB0,CONN14,CH12,PVDD1V5_1,1.5
SWB0,CONN14,CH13,NC,-
SWB0,CONN14,CH14,P1V8_DVDDIO_1,1.8
SWB0,CONN14,CH15,P0V75_DVDD_7,0.75
SWB0,CONN15,CH0,P1V5_AVDD_55,1.524
SWB0,CONN15,CH1,P0V9_AVDD_55,0.915
SWB0,CONN15,CH2,P0V75_DVDD_63,0.75
SWB0,CONN15,CH3,P0V75_AVDD_63,0.756
SWB0,CONN15,CH4,P1V5_AVDD_63,1.524
SWB0,CONN15,CH5,P0V9_AVDD_63,0.915
SWB0,CONN15,CH6,PVDD3_3V_SYNTH_LDO_B3,3.38
SWB0,CONN15,CH7,PVDD1V5_3,1.5
SWB0,CONN15,CH8,P0V85_STBY,0.85
SWB0,CONN15,CH9,P1V8_STBY,1.8
SWB0,CONN15,CH10,NC,-
SWB0,CONN15,CH11,P3V3_STBY,3.3
SWB0,CONN15,CH12,PVDD0V9_2,0.91
SWB0,CONN15,CH13,P0V75_DVDD_55,0.75
SWB0,CONN15,CH14,P0V75_AVDD_55,0.756
SWB0,CONN15,CH15,P1V8_DVDDIO_4,1.8
SWB0,CONN16,CH0,PVDD1V5_0,1.5
SWB0,CONN16,CH1,P1V8_4,1.816
SWB0,CONN16,CH2,PVDD3_3V_SYNTH_LDO_B5,3.38
SWB0,CONN16,CH3,PVDD3_3V_SYNTH_LDO_A5,3.38
SWB0,CONN16,CH4,PVDD3_3V_SYNTH_LDO_B4,3.38
SWB0,CONN16,CH5,PVDD3_3V_SYNTH_LDO_A4,3.38
SWB0,CONN16,CH6,P3V3,3.327
SWB0,CONN16,CH7,PVDD0_8V_T3,0.82
SWB0,CONN16,CH8,P0V75_DVDD_1,0.75
SWB0,CONN16,CH9,P0V75_AVDD_1,0.756
SWB0,CONN16,CH10,P1V5_AVDD_1,1.524
SWB0,CONN16,CH11,P0V9_AVDD_1,0.915
SWB0,CONN16,CH12,PVDD0V9_0,0.915
SWB0,CONN16,CH13,PVDD0V9_1,0.91
SWB0,CONN16,CH14,PVDD0V9_3,0.915
SWB0,CONN16,CH15,PVDD1V2_T3,1.224
SWB1,CONN13,CH0,P0V75_DVDD_47,0.75
SWB1,CONN13,CH1,P0V75_AVDD_47,0.756
SWB1,CONN13,CH2,P1V5_AVDD_47,1.524
SWB1,CONN13,CH3,P0V9_AVDD_47,0.915
SWB1,CONN13,CH4,P1V8_1,1.816
SWB1,CONN13,CH5,PVDD3_3V_SYNTH_LDO_A3,3.38
SWB1,CONN13,CH6,PVDD3_3V_SYNTH_LDO_B1,3.38
SWB1,CONN13,CH7,P1V8_3,1.816
SWB1,CONN13,CH8,P1V8_DVDDIO_3,1.8
SWB1,CONN13,CH9,P0V75_DVDD_39,0.75
SWB1,CONN13,CH10,P0V75_AVDD_39,0.756
SWB1,CONN13,CH11,P1V5_AVDD_39,1.524
SWB1,CONN13,CH12,P0V9_AVDD_39,0.915
SWB1,CONN13,CH13,PVDD1V5_2,1.5
SWB1,CONN13,CH14,PVDD1V8_DUT,1.8
SWB1,CONN13,CH15,PVDD_MDIO,1.2
SWB1,CONN14,CH0,P0V75_AVDD_7,0.756
SWB1,CONN14,CH1,P1V5_AVDD_7,1.524
SWB1,CONN14,CH2,P0V9_AVDD_7,0.915
SWB1,CONN14,CH3,P1V8_5,1.816
SWB1,CONN14,CH4,P1V8_2,1.816
SWB1,CONN14,CH5,PVDD3_3V_SYNTH_LDO_B2,3.38
SWB1,CONN14,CH6,PVDD3_3V_SYNTH_LDO_A2,3.38
SWB1,CONN14,CH7,PVDD3_3V_SYNTH_LDO_A1,3.38
SWB1,CONN14,CH8,PVDD1V5_TSC,1.516
SWB1,CONN14,CH9,PVDD1V5_ANLG,1.516
SWB1,CONN14,CH10,NC,-
SWB1,CONN14,CH11,NC,-
SWB1,CONN14,CH12,PVDD1V5_1,1.5
SWB1,CONN14,CH13,NC,-
SWB1,CONN14,CH14,P1V8_DVDDIO_1,1.8
SWB1,CONN14,CH15,P0V75_DVDD_7,0.75
SWB1,CONN15,CH0,P1V5_AVDD_55,1.524
SWB1,CONN15,CH1,P0V9_AVDD_55,0.915
SWB1,CONN15,CH2,P0V75_DVDD_63,0.75
SWB1,CONN15,CH3,P0V75_AVDD_63,0.756
SWB1,CONN15,CH4,P1V5_AVDD_63,1.524
SWB1,CONN15,CH5,P0V9_AVDD_63,0.915
SWB1,CONN15,CH6,PVDD3_3V_SYNTH_LDO_B3,3.38
SWB1,CONN15,CH7,PVDD1V5_3,1.5
SWB1,CONN15,CH8,P0V85_STBY,0.85
SWB1,CONN15,CH9,P1V8_STBY,1.8
SWB1,CONN15,CH10,NC,-
SWB1,CONN15,CH11,P3V3_STBY,3.3
SWB1,CONN15,CH12,PVDD0V9_2,0.91
SWB1,CONN15,CH13,P0V75_DVDD_55,0.75
SWB1,CONN15,CH14,P0V75_AVDD_55,0.756
SWB1,CONN15,CH15,P1V8_DVDDIO_4,1.8
SWB1,CONN16,CH0,PVDD1V5_0,1.5
SWB1,CONN16,CH1,P1V8_4,1.816
SWB1,CONN16,CH2,PVDD3_3V_SYNTH_LDO_B5,3.38
SWB1,CONN16,CH3,PVDD3_3V_SYNTH_LDO_A5,3.38
SWB1,CONN16,CH4,PVDD3_3V_SYNTH_LDO_B4,3.38
SWB1,CONN16,CH5,PVDD3_3V_SYNTH_LDO_A4,3.38
SWB1,CONN16,CH6,P3V3,3.327
SWB1,CONN16,CH7,PVDD0_8V_T3,0.82
SWB1,CONN16,CH8,P0V75_DVDD_1,0.75
SWB1,CONN16,CH9,P0V75_AVDD_1,0.756
SWB1,CONN16,CH10,P1V5_AVDD_1,1.524
SWB1,CONN16,CH11,P0V9_AVDD_1,0.915
SWB1,CONN16,CH12,PVDD0V9_0,0.915
SWB1,CONN16,CH13,PVDD0V9_1,0.91
SWB1,CONN16,CH14,PVDD0V9_3,0.915
SWB1,CONN16,CH15,PVDD1V2_T3,1.224
1 Board CONN Ch NetName Vnom
2 CB CONN13 CH0 V5P0_ALW 5.0
3 CB CONN13 CH1 V3P3_ALW 3.3
4 CB CONN13 CH2 PWR_VDD_MISC_ALW 0.75
5 CB CONN13 CH3 V1P8_ALW 1.8
6 CB CONN13 CH4 PWR_APU_VDDIO_SUS 1.1
7 CB CONN13 CH5 PWR_VDD_MISC_RUN 0.75
8 CB CONN13 CH6 PWR_APU_VDD_MEM_RUN 0.78
9 CB CONN13 CH7 V0P8_PHY2_DVDD 0.816
10 CB CONN13 CH8 V0P8_AVDD 0.8
11 CB CONN13 CH9 V0P8_PHY 0.8
12 CB CONN13 CH10 V1P8_FPGA 1.8
13 CB CONN13 CH11 V2P5_FPGA 2.5
14 CB CONN13 CH12 V1P1_FPGA 1.1
15 CB CONN13 CH13 P5V_STBY 5.0
16 CB CONN13 CH14 P3V3_STBY 3.3
17 CB CONN13 CH15 V0P8_PHY2_AVDD 0.816
18 SWB0 CONN13 CH0 P0V75_DVDD_47 0.75
19 SWB0 CONN13 CH1 P0V75_AVDD_47 0.756
20 SWB0 CONN13 CH2 P1V5_AVDD_47 1.524
21 SWB0 CONN13 CH3 P0V9_AVDD_47 0.915
22 SWB0 CONN13 CH4 P1V8_1 1.816
23 SWB0 CONN13 CH5 PVDD3_3V_SYNTH_LDO_A3 3.38
24 SWB0 CONN13 CH6 PVDD3_3V_SYNTH_LDO_B1 3.38
25 SWB0 CONN13 CH7 P1V8_3 1.816
26 SWB0 CONN13 CH8 P1V8_DVDDIO_3 1.8
27 SWB0 CONN13 CH9 P0V75_DVDD_39 0.75
28 SWB0 CONN13 CH10 P0V75_AVDD_39 0.756
29 SWB0 CONN13 CH11 P1V5_AVDD_39 1.524
30 SWB0 CONN13 CH12 P0V9_AVDD_39 0.915
31 SWB0 CONN13 CH13 PVDD1V5_2 1.5
32 SWB0 CONN13 CH14 PVDD1V8_DUT 1.8
33 SWB0 CONN13 CH15 PVDD_MDIO 1.2
34 SWB0 CONN14 CH0 P0V75_AVDD_7 0.756
35 SWB0 CONN14 CH1 P1V5_AVDD_7 1.524
36 SWB0 CONN14 CH2 P0V9_AVDD_7 0.915
37 SWB0 CONN14 CH3 P1V8_5 1.816
38 SWB0 CONN14 CH4 P1V8_2 1.816
39 SWB0 CONN14 CH5 PVDD3_3V_SYNTH_LDO_B2 3.38
40 SWB0 CONN14 CH6 PVDD3_3V_SYNTH_LDO_A2 3.38
41 SWB0 CONN14 CH7 PVDD3_3V_SYNTH_LDO_A1 3.38
42 SWB0 CONN14 CH8 PVDD1V5_TSC 1.516
43 SWB0 CONN14 CH9 PVDD1V5_ANLG 1.516
44 SWB0 CONN14 CH10 NC -
45 SWB0 CONN14 CH11 NC -
46 SWB0 CONN14 CH12 PVDD1V5_1 1.5
47 SWB0 CONN14 CH13 NC -
48 SWB0 CONN14 CH14 P1V8_DVDDIO_1 1.8
49 SWB0 CONN14 CH15 P0V75_DVDD_7 0.75
50 SWB0 CONN15 CH0 P1V5_AVDD_55 1.524
51 SWB0 CONN15 CH1 P0V9_AVDD_55 0.915
52 SWB0 CONN15 CH2 P0V75_DVDD_63 0.75
53 SWB0 CONN15 CH3 P0V75_AVDD_63 0.756
54 SWB0 CONN15 CH4 P1V5_AVDD_63 1.524
55 SWB0 CONN15 CH5 P0V9_AVDD_63 0.915
56 SWB0 CONN15 CH6 PVDD3_3V_SYNTH_LDO_B3 3.38
57 SWB0 CONN15 CH7 PVDD1V5_3 1.5
58 SWB0 CONN15 CH8 P0V85_STBY 0.85
59 SWB0 CONN15 CH9 P1V8_STBY 1.8
60 SWB0 CONN15 CH10 NC -
61 SWB0 CONN15 CH11 P3V3_STBY 3.3
62 SWB0 CONN15 CH12 PVDD0V9_2 0.91
63 SWB0 CONN15 CH13 P0V75_DVDD_55 0.75
64 SWB0 CONN15 CH14 P0V75_AVDD_55 0.756
65 SWB0 CONN15 CH15 P1V8_DVDDIO_4 1.8
66 SWB0 CONN16 CH0 PVDD1V5_0 1.5
67 SWB0 CONN16 CH1 P1V8_4 1.816
68 SWB0 CONN16 CH2 PVDD3_3V_SYNTH_LDO_B5 3.38
69 SWB0 CONN16 CH3 PVDD3_3V_SYNTH_LDO_A5 3.38
70 SWB0 CONN16 CH4 PVDD3_3V_SYNTH_LDO_B4 3.38
71 SWB0 CONN16 CH5 PVDD3_3V_SYNTH_LDO_A4 3.38
72 SWB0 CONN16 CH6 P3V3 3.327
73 SWB0 CONN16 CH7 PVDD0_8V_T3 0.82
74 SWB0 CONN16 CH8 P0V75_DVDD_1 0.75
75 SWB0 CONN16 CH9 P0V75_AVDD_1 0.756
76 SWB0 CONN16 CH10 P1V5_AVDD_1 1.524
77 SWB0 CONN16 CH11 P0V9_AVDD_1 0.915
78 SWB0 CONN16 CH12 PVDD0V9_0 0.915
79 SWB0 CONN16 CH13 PVDD0V9_1 0.91
80 SWB0 CONN16 CH14 PVDD0V9_3 0.915
81 SWB0 CONN16 CH15 PVDD1V2_T3 1.224
82 SWB1 CONN13 CH0 P0V75_DVDD_47 0.75
83 SWB1 CONN13 CH1 P0V75_AVDD_47 0.756
84 SWB1 CONN13 CH2 P1V5_AVDD_47 1.524
85 SWB1 CONN13 CH3 P0V9_AVDD_47 0.915
86 SWB1 CONN13 CH4 P1V8_1 1.816
87 SWB1 CONN13 CH5 PVDD3_3V_SYNTH_LDO_A3 3.38
88 SWB1 CONN13 CH6 PVDD3_3V_SYNTH_LDO_B1 3.38
89 SWB1 CONN13 CH7 P1V8_3 1.816
90 SWB1 CONN13 CH8 P1V8_DVDDIO_3 1.8
91 SWB1 CONN13 CH9 P0V75_DVDD_39 0.75
92 SWB1 CONN13 CH10 P0V75_AVDD_39 0.756
93 SWB1 CONN13 CH11 P1V5_AVDD_39 1.524
94 SWB1 CONN13 CH12 P0V9_AVDD_39 0.915
95 SWB1 CONN13 CH13 PVDD1V5_2 1.5
96 SWB1 CONN13 CH14 PVDD1V8_DUT 1.8
97 SWB1 CONN13 CH15 PVDD_MDIO 1.2
98 SWB1 CONN14 CH0 P0V75_AVDD_7 0.756
99 SWB1 CONN14 CH1 P1V5_AVDD_7 1.524
100 SWB1 CONN14 CH2 P0V9_AVDD_7 0.915
101 SWB1 CONN14 CH3 P1V8_5 1.816
102 SWB1 CONN14 CH4 P1V8_2 1.816
103 SWB1 CONN14 CH5 PVDD3_3V_SYNTH_LDO_B2 3.38
104 SWB1 CONN14 CH6 PVDD3_3V_SYNTH_LDO_A2 3.38
105 SWB1 CONN14 CH7 PVDD3_3V_SYNTH_LDO_A1 3.38
106 SWB1 CONN14 CH8 PVDD1V5_TSC 1.516
107 SWB1 CONN14 CH9 PVDD1V5_ANLG 1.516
108 SWB1 CONN14 CH10 NC -
109 SWB1 CONN14 CH11 NC -
110 SWB1 CONN14 CH12 PVDD1V5_1 1.5
111 SWB1 CONN14 CH13 NC -
112 SWB1 CONN14 CH14 P1V8_DVDDIO_1 1.8
113 SWB1 CONN14 CH15 P0V75_DVDD_7 0.75
114 SWB1 CONN15 CH0 P1V5_AVDD_55 1.524
115 SWB1 CONN15 CH1 P0V9_AVDD_55 0.915
116 SWB1 CONN15 CH2 P0V75_DVDD_63 0.75
117 SWB1 CONN15 CH3 P0V75_AVDD_63 0.756
118 SWB1 CONN15 CH4 P1V5_AVDD_63 1.524
119 SWB1 CONN15 CH5 P0V9_AVDD_63 0.915
120 SWB1 CONN15 CH6 PVDD3_3V_SYNTH_LDO_B3 3.38
121 SWB1 CONN15 CH7 PVDD1V5_3 1.5
122 SWB1 CONN15 CH8 P0V85_STBY 0.85
123 SWB1 CONN15 CH9 P1V8_STBY 1.8
124 SWB1 CONN15 CH10 NC -
125 SWB1 CONN15 CH11 P3V3_STBY 3.3
126 SWB1 CONN15 CH12 PVDD0V9_2 0.91
127 SWB1 CONN15 CH13 P0V75_DVDD_55 0.75
128 SWB1 CONN15 CH14 P0V75_AVDD_55 0.756
129 SWB1 CONN15 CH15 P1V8_DVDDIO_4 1.8
130 SWB1 CONN16 CH0 PVDD1V5_0 1.5
131 SWB1 CONN16 CH1 P1V8_4 1.816
132 SWB1 CONN16 CH2 PVDD3_3V_SYNTH_LDO_B5 3.38
133 SWB1 CONN16 CH3 PVDD3_3V_SYNTH_LDO_A5 3.38
134 SWB1 CONN16 CH4 PVDD3_3V_SYNTH_LDO_B4 3.38
135 SWB1 CONN16 CH5 PVDD3_3V_SYNTH_LDO_A4 3.38
136 SWB1 CONN16 CH6 P3V3 3.327
137 SWB1 CONN16 CH7 PVDD0_8V_T3 0.82
138 SWB1 CONN16 CH8 P0V75_DVDD_1 0.75
139 SWB1 CONN16 CH9 P0V75_AVDD_1 0.756
140 SWB1 CONN16 CH10 P1V5_AVDD_1 1.524
141 SWB1 CONN16 CH11 P0V9_AVDD_1 0.915
142 SWB1 CONN16 CH12 PVDD0V9_0 0.915
143 SWB1 CONN16 CH13 PVDD0V9_1 0.91
144 SWB1 CONN16 CH14 PVDD0V9_3 0.915
145 SWB1 CONN16 CH15 PVDD1V2_T3 1.224
docs/release-notes/v1.0.10.md
+56
View File
@@ -0,0 +1,56 @@
# v1.0.10 — The soak loop stops spinning flat out, and shows you what is still running
## ✨ New features
**Every soak round now reports the background jobs**
* Script B's monitoring loop prints `bgctl list` (platform jobs) and `jobs` (the login shell's own background jobs) on every pass, right after the platform data. A stress job that dies three hours into an overnight soak now shows up as a shorter list on the next round, instead of only being noticed at the end — or not at all.
* The two lists answer different questions and are both worth having: `bgctl` knows about the platform's job runner, `jobs` knows about anything the macro backgrounded in that shell.
**A single table for all 144 margin channels**
* `docs/LTC2980_channel_map.csv` flattens the nine `settings/*.conf` files into one sheet — `Board,CONN,Ch,NetName,Vnom` — so "which board and channel is `PVDD1V5_TSC` on?" is one search instead of opening nine files.
* `tools/gen_channel_map.sh` regenerates it. **The CSV is output, not source**: edit the `.conf` files and re-run the script, never the other way round.
* Unused channels stay in the table as `NC` / `-` rather than being dropped, because the channel number is also the PMBus page (`ch / 8` picks the chip, `ch % 8` picks the page) — filtering the gaps out would shift everything after them.
**The bench command lists that these scripts came from**
* `tools/100G_PRBS.txt`, `tools/TR518.txt` and `tools/fan_ctrl.txt` join the existing `traffic_loopback_*.txt` set: the raw `bcmcmd` / sysfs sequences, kept in the form you can paste into a console when a script is misbehaving and you want to drive the hardware directly.
## 🐛 Bug fixes
**The soak loop ran as fast as the DUT could answer**
* `while 1` had no pause at all, so each round started the moment the previous one finished. Over a long soak that means constant console traffic and a log full of near-identical samples taken seconds apart. The loop now ends each round with `pause 60`.
* Note the gap this leaves: the Status sheet asks for a 10-minute sampling interval, and 60 seconds is still hard-coded rather than configurable. This makes the loop sane, it does not finish the job.
**A comment promised a cadence the code never had**
* The loop was labelled `Get data every 10mins` while running with no delay whatsoever. It now says what it does.
## 📦 Downloads
| File | Contents |
|---|---|
| `Script_ABC_Blanton_V1.0.10.zip` | The full Tera Term working directory, including `Blanton_Script/` to copy onto the DUT |
**After copying to the DUT:**
```bash
chmod +x ~/Blanton_Script/*.sh # see below
grep -rlU $'\r' ~/Blanton_Script # expect no output
```
`mgmt_ping_monitor.sh` and `port_prbs_monitor.sh` launch their workers through `bash`, so those two run without the execute bit. `bmc_monitor.sh` and `usb_target.sh` still need it, and neither git (mode 100644) nor a Windows/USB copy carries it. Without the `chmod`, `start` fails with `Permission denied` and the later `cat` finds nothing: **the section ends up empty and nothing reports an error.**
## ⚠️ Before you run
* **Declare the switch population.** `SWB_UNIT0` / `SWB_UNIT1` in `config.ttl` say which switch units this DUT has; traffic and the readiness gate both follow them.
* **Set `FAN_SPEED`.** It is applied at the start of every run.
* **Management connectivity is in use, not preserved.** Both management NICs are up and pinging — drive the run from the serial console.
* **PRBS is still not wired into the macros.** Run `port_prbs_monitor.sh` by hand if you want it; the calls in A/B/C remain commented out, unchanged from v1.0.9.
* **TR518 and the loopback traffic test cannot both run.** `tools/TR518.txt` sets `port all lb=mac` and `l2 learn off` across the whole unit, which is the same hardware `blanton_traffic_linespeed` is using. Pick one.
* **Two settings persist to `config_db.json`** and survive a reboot: LLDP is left disabled and the 100G uplinks are left configured. Restore them before the DUT moves on.
## 🔗 Links
* [ARCHITECTURE.md](https://etgit.et-wen.com/etwen/Blanton_TTL_Script/src/branch/main/ARCHITECTURE.md) — test flow, data models, constraints
* [CLAUDE.md](https://etgit.et-wen.com/etwen/Blanton_TTL_Script/src/branch/main/CLAUDE.md) — commands and the bench gotchas
* [LTC2980_channel_map.csv](https://etgit.et-wen.com/etwen/Blanton_TTL_Script/src/branch/main/docs/LTC2980_channel_map.csv) — all 144 margin channels
**Full changelog:** [V1.0.9...V1.0.10](https://etgit.et-wen.com/etwen/Blanton_TTL_Script/compare/V1.0.9...V1.0.10)
docs/release-notes/v1.0.11.md
+59
View File
@@ -0,0 +1,59 @@
# v1.0.11 — Saving the margin settings to NVM is now one command, and the command is correct
## ✨ New features
**`margin_save blanton` — all 18 LTC2977 in one go**
* On this platform the CB FPGA's I2C channels are also exposed as ordinary Linux i2c buses, so every margin controller on the box — CB and both switch boards — can be reached with plain `i2cset`. `margin_save blanton` walks all 18 of them from one flat list: no `margin_init`, no FPGA channel setup, no `pcimem`.
* The channel-to-bus mapping it relies on (F3 Ch6 → bus 13, Ch7 → 14, Ch8 → 15, Ch9 → 16; CB is bus 4 as before) is now written down in `ARCHITECTURE.md` and the margin README, not just known at the bench.
* **A partly-populated DUT is a normal build.** Comment out the lines you do not have in `MARGIN_BLANTON_STORE` at the top of `margin.sh` rather than letting the tool talk to boards that are not there.
* Missing bus and unresponsive chip are reported as two different failures. `/dev/i2c-16 does not exist` means the FPGA's i2c adapters did not enumerate; `i2cset failed (NACK/busy)` means the board is absent or the address is wrong. Chasing the second when you have the first wastes an afternoon.
**`margin_save all` — every board in `settings/`**
* Runs `margin_init` + `margin_save` across all nine boards, then puts back whichever board you had loaded, so a following `margin_status` still reports the board you were looking at.
* It does not stop at the first failure: a half-saved set is harder to reason about than a fully-attempted one. The summary names the boards that failed.
Both print a per-chip line and a `N saved, M failed` tally, and both return a non-zero exit code when anything failed.
**The fans now default to full speed**
* `FAN_SPEED` in `config.ttl` is 100 instead of 30. A soak is a thermal test of everything *except* the cooling, so the cooling should not be a variable in it — and a DUT that throttles halfway through a run produces results that look like a different fault. Lower it deliberately if quiet operation is what you are measuring.
## 🐛 Bug fixes
**A failed NVM write still reported success**
* `margin_save` discarded the result of every write, so a NACK printed `Change Saved` exactly like a successful store. For the one operation in this tool that is permanent, that is the worst place to stay quiet. Each store is now checked and named if it fails.
**`STORE_USER_ALL` was sent with a data byte it should not have**
* The command went out as `0x15` followed by a dummy `0x00` — an SMBus write-byte, where `STORE_USER_ALL` is a send-byte. The LTC2977 tolerated it, but tolerance is not correctness. It is now `i2cset ... 0x15 c` on the native path and a no-data `cb_pmbus_write` on the FPGA path.
## 📦 Downloads
| File | Contents |
|---|---|
| `Script_ABC_Blanton_V1.0.11.zip` | The full Tera Term working directory, including `Blanton_Script/` to copy onto the DUT |
**After copying to the DUT:**
```bash
chmod +x ~/Blanton_Script/*.sh # see below
grep -rlU $'\r' ~/Blanton_Script # expect no output
```
`mgmt_ping_monitor.sh` and `port_prbs_monitor.sh` launch their workers through `bash`, so those two run without the execute bit. `bmc_monitor.sh` and `usb_target.sh` still need it, and neither git (mode 100644) nor a Windows/USB copy carries it. Without the `chmod`, `start` fails with `Permission denied` and the later `cat` finds nothing: **the section ends up empty and nothing reports an error.**
## ⚠️ Before you run
* **`margin_save` in any form writes NVM permanently.** A power cycle does not undo it. `margin_save all` and `margin_save blanton` do it to all 18 controllers at once. Run `margin_status_all.sh` first and never call any of them during a test run — the macros do not, and should not be made to.
* **The 18 raw commands were verified on the DUT; the wrapper was not.** `margin_save blanton` issues exactly the sequence that was run by hand at the bench, and the packaging was tested against stubbed hardware, but the function itself has not been run on a DUT yet. Watch the per-chip lines the first time.
* **Declare the switch population.** `SWB_UNIT0` / `SWB_UNIT1` in `config.ttl` say which switch units this DUT has; traffic and the readiness gate both follow them.
* **`FAN_SPEED` is now 100.** It is applied at the start of every run, so this build runs the fans flat out unless you change `config.ttl`. Expect the noise.
* **Management connectivity is in use, not preserved.** Both management NICs are up and pinging — drive the run from the serial console.
* **PRBS is still not wired into the macros.** Run `port_prbs_monitor.sh` by hand if you want it; the calls in A/B/C remain commented out.
* **Two settings persist to `config_db.json`** and survive a reboot: LLDP is left disabled and the 100G uplinks are left configured. Restore them before the DUT moves on.
## 🔗 Links
* [ARCHITECTURE.md](https://etgit.et-wen.com/etwen/Blanton_TTL_Script/src/branch/main/ARCHITECTURE.md) — test flow, data models, constraints
* [CLAUDE.md](https://etgit.et-wen.com/etwen/Blanton_TTL_Script/src/branch/main/CLAUDE.md) — commands and the bench gotchas
* [LTC2980_Margin_Script/README.md](https://etgit.et-wen.com/etwen/Blanton_TTL_Script/src/branch/main/src/Script_ABC_Blanton/Blanton_Script/LTC2980_Margin_Script/README.md) — the three `margin_save` variants and what each one sends
**Full changelog:** [V1.0.10...V1.0.11](https://etgit.et-wen.com/etwen/Blanton_TTL_Script/compare/V1.0.10...V1.0.11)
docs/release-notes/v1.0.7.md
+65
View File
@@ -0,0 +1,65 @@
# v1.0.7 — Management-link ping test, and the fans start where you set them
## ✨ New features
**10G / 1G management port ping test**
* New `mgmt_ping_monitor.sh` exercises both management NICs in one loop: it brings each up with iproute2, waits for the link to settle, then pings that NIC's own target — `eth0` → `192.168.1.30`, `eth1` → `192.168.1.31`.
* Runs detached like the other monitors: `start` / `stop` / `status` / `fg` / `summary`. `start` clears the previous log, so one run means one log.
* Every leg writes a single greppable line — `RESULT 10G eth0 -> 192.168.1.30 tx=10 rx=10 loss=0% rtt_avg=1.743ms nic_tx=10 nic_rx=10 PASS` — so a whole soak can be read with `summary` instead of scrolling.
* `nic_tx` / `nic_rx` are that interface's own counter delta across the burst. If a ping passes but they stay near zero, the traffic left on the *other* NIC and the number does not belong to this one.
* Script A runs one round as a baseline; Script B leaves it running through the soak.
**Fan speed is set at the start of every run**
* `FAN_SPEED` in `config.ttl` (default 30) is applied by Script A, so a run no longer inherits whatever the previous test left the fans doing.
* Both MAX31790 controllers are rebound first, which clears a controller left in an odd state.
**Stress load moved onto the platform's own job runner**
* CPU, DDR, SSD and USB stress now go through `bgctl`, replacing the `~/hammer/tools/stress_*.py` scripts. `bgctl list` shows what is running; Script C stops everything with `bgctl stop --all`.
* BMC DDR stress runs through `bmc-manager`, and a new BMC USB test discovers the `cdc_ncm` interface and pings across it for four hours under `systemd-run`.
**More of the DUT on record**
* Script A now captures the boot image, `show version`, firmware status, system EEPROM, SSD health, TPM version and NVMe SMART data before the test starts.
* PCIe AER now sits next to `ras-mc-ctl --summary`, and Script C closes with NVMe health so a disk that degraded during the soak is visible.
* `dmesg` capture uses human-readable timestamps and one combined error pattern, then clears the ring buffer — so Script C's dmesg shows only what the soak produced, not everything since boot.
* Each run opens with `hw-test-session start` and closes with `finish`; Script C copies the job logs to `/mnt/usb/jobs-<date>_<time>` so they leave the DUT with the run they belong to.
## 🐛 Bug fixes
**Script A no longer hangs waiting for ports that are already up**
* The readiness gate required *more than* 216 ports up, but a fully cabled unit reports exactly 216 — 108 loopback pairs times two. Script A sat in the poll loop forever on the very state it was waiting for. It now proceeds at 216.
* The comments in `wait_init.ttl` still described the old "more than" rule; they now match the code, so the off-by-one cannot be reintroduced by reading the wrong line.
**The macro no longer runs ahead of the DUT during the soak**
* Script B set a 15-second wait cap for the `cdc_ncm` probe and never restored it. In Tera Term that cap is global, so it stayed in force for everything after — including the traffic setup, which walks 108 VLANs per switch unit and takes far longer. A timed-out wait returns without the prompt, leaving every later command issued a step early.
**Fan controller is no longer bound twice**
* One of the two MAX31790 controllers received a second `bind` immediately after the first, which could only fail because the driver was already attached.
## 📦 Downloads
| File | Contents |
|---|---|
| `Script_ABC_Blanton_V1.0.7.zip` | The full Tera Term working directory, including `Blanton_Script/` to copy onto the DUT |
**After copying to the DUT:**
```bash
chmod +x ~/Blanton_Script/*.sh # required -- see below
grep -rlU $'\r' ~/Blanton_Script # expect no output
```
The `chmod +x` is not optional. `mgmt_ping_monitor.sh` is executed rather than sourced and re-execs its own path to daemonise, and neither git (mode 100644) nor a Windows/USB copy carries the execute bit. Without it `start` fails with `Permission denied` and the later `cat` finds nothing — **the section ends up empty and nothing reports an error**.
## ⚠️ Before you run
* **Declare the switch population.** `SWB_UNIT0` / `SWB_UNIT1` in `config.ttl` say which switch units this DUT has. Traffic and the readiness gate both follow them: a single unit gets `-u 0` or `-u 1`, and with neither set the traffic stage is skipped instead of failing against hardware that is not there.
* **Both management NICs stay up.** If they share a subnet, keep `ARP_STRICT=1` — otherwise the target's ARP can be answered by either NIC and a reply may arrive on the one that did not send.
* **Management connectivity is exercised, not preserved.** Drive the run from the serial console.
* **Two settings persist to `config_db.json`** and survive a reboot: LLDP is left disabled, and the 100G uplinks are left configured. Restore them before the DUT moves on.
## 🔗 Links
* [ARCHITECTURE.md](https://etgit.et-wen.com/etwen/Blanton_TTL_Script/src/branch/main/ARCHITECTURE.md) — test flow, data models, constraints
* [CLAUDE.md](https://etgit.et-wen.com/etwen/Blanton_TTL_Script/src/branch/main/CLAUDE.md) — commands and the bench gotchas
**Full changelog:** [V1.0.5...V1.0.7](https://etgit.et-wen.com/etwen/Blanton_TTL_Script/compare/V1.0.5...V1.0.7)
docs/release-notes/v1.0.8.md
+61
View File
@@ -0,0 +1,61 @@
# v1.0.8 — Both management links tested at once, and ARP stops looking like packet loss
## ✨ New features
**Both management NICs are pinged simultaneously and continuously**
* `mgmt_ping_monitor.sh` no longer alternates fixed bursts. `start` configures both NICs, then pings from each at the same time and keeps accumulating until stopped — so a soak-long run is one continuous measurement rather than a series of snapshots.
* `stop` renders a report into the log: the last 20 entries per NIC, each one's ping statistics and PASS/FAIL, then `ip -s link show` for both interfaces.
* Every line is timestamped, and a request that got no reply prints a marker instead of merely being absent — a drop is visible in the tail, not inferred from a gap in the sequence numbers.
* `status` shows both pids and how many replies each NIC has received so far, which is the quick way to see one side is dead without waiting for the report.
**The USB stress target is detected, not assumed**
* New `usb_target.sh` reports an inserted USB device's node, mount point or by-id path. Script B asks it for the node and builds the stress command from the answer, so a stick that enumerates as `sdb` no longer sends a write test at whatever `/dev/sda1` happens to be.
* It excludes whatever disk backs `/` and `/host` — this platform can boot from a USB DOM, which also reports as USB — refuses to guess when several USB disks are present, and when it mounts, verifies the result is actually writable rather than trusting that `mount` succeeded.
**BMC I2C integrity is exercised through the soak**
* `bmc_monitor.sh` is back in the run and now writes two complementary patterns to a BMC scratch register and reads each back. One pattern alone cannot catch a bit stuck the same way it was written; repeating the pair through the soak turns an intermittent I2C fault into something the log records rather than something the tester has to witness.
**Test artefacts leave the DUT with the run**
* Script C copies `bmc_poll.log` and `mgmt_ping.log` into the job directory before it is archived to USB, so the monitors' output travels with the `bgctl` job logs.
* DDR stress now runs continuously instead of stopping after 100 passes, matching the other soak loads.
## 🐛 Bug fixes
**Three FAILs that were not link faults**
* A bench run reported `FAIL=3` with zero NIC errors, zero drops and sub-millisecond replies. Every failure was missing exactly `icmp_seq=1` and nothing else: once the neighbour entry for the target expires, the first echo request is spent resolving ARP and `ping` counts it as loss. A discarded warm-up ping per NIC now absorbs that, which is what lets the loss threshold stay at zero and still mean something. Raising the threshold instead would have hidden genuine single-packet loss.
**Job logs were being cleared before they were collected**
* Script C ran `bgctl reset --yes` while killing processes — before the job directory is copied to USB. Moved to after the archive, so a run's own logs are collected before anything clears them.
**The fan controller was bound twice**
* One of the two MAX31790 controllers received a second `bind` immediately after the first, which could only fail because the driver was already attached.
## 📦 Downloads
| File | Contents |
|---|---|
| `Script_ABC_Blanton_V1.0.8.zip` | The full Tera Term working directory, including `Blanton_Script/` to copy onto the DUT |
**After copying to the DUT:**
```bash
chmod +x ~/Blanton_Script/*.sh # see below
grep -rlU $'\r' ~/Blanton_Script # expect no output
```
`mgmt_ping_monitor.sh` no longer re-execs itself, so `bash mgmt_ping_monitor.sh start` works without the execute bit. `bmc_monitor.sh` and `usb_target.sh` still need it — and neither git (mode 100644) nor a Windows/USB copy carries it. Without the `chmod`, `start` fails with `Permission denied` and the later `cat` finds nothing: **the section ends up empty and nothing reports an error.**
## ⚠️ Before you run
* **Declare the switch population.** `SWB_UNIT0` / `SWB_UNIT1` in `config.ttl` say which switch units this DUT has. Traffic and the readiness gate both follow them; with neither set the traffic stage is skipped rather than failing against hardware that is not there.
* **Set the fan speed you want.** `FAN_SPEED` in `config.ttl` is applied at the start of every run.
* **Management connectivity is in use, not preserved.** Both NICs are up and pinging — drive the run from the serial console.
* **If the two management NICs share a subnet, keep `ARP_STRICT=1`.** Otherwise the target's ARP can be answered by either NIC and a reply may arrive on the one that did not send. Check `nic_tx` / `nic_rx` on the RESULT line: they are that interface's own counter delta.
* **Two settings persist to `config_db.json`** and survive a reboot: LLDP is left disabled and the 100G uplinks are left configured. Restore them before the DUT moves on.
## 🔗 Links
* [ARCHITECTURE.md](https://etgit.et-wen.com/etwen/Blanton_TTL_Script/src/branch/main/ARCHITECTURE.md) — test flow, data models, constraints
* [CLAUDE.md](https://etgit.et-wen.com/etwen/Blanton_TTL_Script/src/branch/main/CLAUDE.md) — commands and the bench gotchas
**Full changelog:** [V1.0.7...V1.0.8](https://etgit.et-wen.com/etwen/Blanton_TTL_Script/compare/V1.0.7...V1.0.8)
docs/release-notes/v1.0.9.md
+63
View File
@@ -0,0 +1,63 @@
# v1.0.9 — 100G PRBS testing, and the job logs actually reach the USB stick
## ✨ New features
**100G uplink PRBS test**
* New `port_prbs_monitor.sh` drives a PRBS test on both 100G uplinks: it clears low-power mode, arms the pattern, then polls `phy diag <phy> prbs get` in the background until stopped. A poll counts as PASS only when the output says `PRBS OK!`; `prbsstat Ber` is captured alongside every poll for the record.
* `stop` runs `prbsstat STOp` and `prbs clear` on each port before rendering the report, so the test does not leave PRBS armed behind it.
* `report` gives the tally the bench actually wants:
```
PORT POLLS PASS FAIL RESULT
Ethernet513 42 42 0 PASS
Ethernet514 42 40 2 FAIL
```
* **One port at a time is a first-class mode.** `start a` or `start b` runs a single uplink, which is how you separate a genuine port fault from the DUT not coping with two PRBS streams at once. A port that was not run reports `SKIP`, not `FAIL`.
* Every command and its full output — setup, each poll, teardown — goes to that port's raw log.
> ⚠️ The script ships in this build and can be run by hand, but **the calls in Script A, B and C are commented out**: PRBS is still under bring-up on this platform.
**USB target detection**
* `usb_target.sh` reports an inserted USB device's node, mount point or by-id path. It excludes whatever disk backs `/` and `/host` — this platform can boot from a USB DOM, which also reports as USB — refuses to guess when several USB disks are present, and when mounting, verifies the result is writable rather than trusting that `mount` succeeded.
* Script B builds the USB stress command from the detected node instead of a hard-coded `/dev/sda1`.
## 🐛 Bug fixes
**The job logs were being written to a path nobody collected**
* Stress output, the monitors' logs and the USB archive disagreed about where the job directory lives. Everything now uses `/host/hw-eval/jobs/`, so what Script B writes is what Script C copies out.
**Script C copied to a USB that was never mounted**
* The archive step assumed `/mnt/usb` was ready. Script C now finds the device and mounts it first, so a run's logs leave the DUT instead of being written into an empty mount point.
**`show interfaces status` right after starting PRBS reads as a failure**
* With PRBS armed the link is out of normal operation and reports DOWN. `port_prbs_monitor.sh` deliberately does not print the port status at `start` — it appears in the report instead, after `prbs clear`, labelled as the recovered state.
## 📦 Downloads
| File | Contents |
|---|---|
| `Script_ABC_Blanton_V1.0.9.zip` | The full Tera Term working directory, including `Blanton_Script/` to copy onto the DUT |
**After copying to the DUT:**
```bash
chmod +x ~/Blanton_Script/*.sh # see below
grep -rlU $'\r' ~/Blanton_Script # expect no output
```
`mgmt_ping_monitor.sh` and `port_prbs_monitor.sh` launch their workers through `bash`, so those two run without the execute bit. `bmc_monitor.sh` and `usb_target.sh` still need it, and neither git (mode 100644) nor a Windows/USB copy carries it. Without the `chmod`, `start` fails with `Permission denied` and the later `cat` finds nothing: **the section ends up empty and nothing reports an error.**
## ⚠️ Before you run
* **Declare the switch population.** `SWB_UNIT0` / `SWB_UNIT1` in `config.ttl` say which switch units this DUT has; traffic and the readiness gate both follow them.
* **Set `FAN_SPEED`.** It is applied at the start of every run.
* **Management connectivity is in use, not preserved.** Both management NICs are up and pinging — drive the run from the serial console.
* **PRBS is not wired into the macros yet.** Run `port_prbs_monitor.sh` by hand if you want it; uncommenting the calls in A/B/C is not supported in this build.
* **Two settings persist to `config_db.json`** and survive a reboot: LLDP is left disabled and the 100G uplinks are left configured. Restore them before the DUT moves on.
## 🔗 Links
* [ARCHITECTURE.md](https://etgit.et-wen.com/etwen/Blanton_TTL_Script/src/branch/main/ARCHITECTURE.md) — test flow, data models, constraints
* [CLAUDE.md](https://etgit.et-wen.com/etwen/Blanton_TTL_Script/src/branch/main/CLAUDE.md) — commands and the bench gotchas
**Full changelog:** [V1.0.8...V1.0.9](https://etgit.et-wen.com/etwen/Blanton_TTL_Script/compare/V1.0.8...V1.0.9)
docs/release-notes/v1.1.0.md
+81
View File
@@ -0,0 +1,81 @@
# v1.1.0 — BER, power under load, and a 100G port that actually keeps sending
## ✨ New features
**Whole-switch SerDes BER sweep**
* New `blanton_ber.sh` runs PRBS across every cabled port and reports the bit error rate lane by lane. `init` → `start` → wait → `report` → `stop` → `clear`, with `-u 0` / `-u 1` for a single switch unit.
* **A lane passes only when its BER is below 1e-6.** Equal to the threshold is a FAIL, not a pass. `-c <ber>` sets a different bar.
* `report` ends with a summary across both units, and each unit's row carries its **worst lane** — so a run where everything passes still tells you how much margin there was:
```
Unit LANES PASS FAIL NA WORST BER WORST LANE RESULT
unit 0 432 432 0 0 1.98e-08 203[0] PASS
unit 1 432 432 0 0 6.34e-10 366[1] PASS
```
* `init` also checks that every lane locked. This matters: an unlocked lane still reports a BER later, and it is a meaningless one. Without the check, a dead lane can report a beautiful number and pass.
* A lane whose reading is not a number is `NA` — counted separately from `FAIL`, because "not measured" and "measured and bad" are different problems.
* Script C runs the sweep after the traffic report, following `SWB_UNIT0` / `SWB_UNIT1` the same way the traffic block does.
**TR518 load test, for measuring power under traffic**
* New `blanton_tr518.sh` puts the cd ports in loopback and runs the built-in `tr 518` packet test, then waits `TR_SETTLE_SEC` (120s by default) before handing back — so the power figures you take afterwards are loaded and settled, not caught mid-ramp.
* `-u 0` / `-u 1` for one unit; no flag runs both.
* `stop` sends `port cd lb=none` and nothing else, which is exactly what the bench procedure does. **L2 learning and test mode are left as `start` set them** — the tool says so on every `stop` rather than quietly leaving the box in a state you did not ask about. `TR_RESTORE_LEARN=1` / `TR_RESTORE_TESTMODE=1` if you want a true inverse.
**Per-rail power readback for both switch boards**
* `TH6_SWB0_power_readback.sh` / `TH6_SWB1_power_readback.sh` report V × I and total power for the 19 rails on each board.
## 🐛 Bug fixes
**The power readback measured every rail at a different moment**
* It ran `show platform voltage` and `show platform current` once *per rail* — 38 invocations of a slow CLI, and 38 different instants. Under load the currents move a lot (`TH6_CORE` was seen going from 186 A to 636 A), so the "total" was a sum of readings taken seconds apart. Both tables are now read once, up front. Same output, one moment.
* A rail missing from the sensor table used to contribute a silent `0.000 V / 0.00 W` to the total. It now says so on stderr; the printed report format is unchanged.
**The 100G port stopped sending after one round trip**
* `ce0` has no loopback partner, and a switch never forwards a frame back out the port it arrived on — so a `tx` burst went out, came back, and was dropped. TX 100, RX 100, silence. That measures the link; it does not exercise it.
* `init` now sets an ingress mirror of `ce0` back to itself. The mirrored copy is not egress-filtered, so each packet keeps lapping and the load is set by how much you inject (`-tx`). **`stop` is what ends it** — removing the VLAN membership does not, because the mirrored copy never consulted the VLAN.
**The 100G verdict was being decided the wrong way**
* `ce0` was treated as a cross-unit check. The bench says otherwise: there is one `ce0` per unit and a burst sent on unit 0 alone came back on unit 0. It is now judged within its own unit. The distinction is invisible while everything works and decisive when it does not — read as cross-unit, *both* links dying still leaves `unit0.TX == unit1.RX` (0 == 0) and reports PASS.
**Every BER lane reported `NA`, and the Port column printed `NA` too**
* `bcmcmd` returns CRLF, and the BER is the last token on its line, so the carriage return stayed glued to the number: it failed the numeric check, and printing it sent the cursor back to column 1 so the RESULT column overwrote the start of the row. Both symptoms, one stray `\r`.
## 📦 Downloads
| File | Contents |
|---|---|
| `Script_ABC_Blanton_V1.1.0.zip` | The full Tera Term working directory, including `Blanton_Script/` to copy onto the DUT |
**After copying to the DUT:**
```bash
chmod +x ~/Blanton_Script/*.sh # see below
grep -rlU $'\r' ~/Blanton_Script # expect no output
```
`blanton_ber.sh` is invoked by Script C as `./Blanton_Script/blanton_ber.sh`, so it joins `bmc_monitor.sh` and `usb_target.sh` in needing the execute bit — and neither git nor a Windows/USB copy carries it reliably. Without the `chmod` the BER section fails with `Permission denied` and the log simply has no BER in it.
## ⚠️ Before you run
* **These three tests cannot share the switch.** `blanton_ber.sh`, `blanton_tr518.sh` and `blanton_traffic_linespeed` all take over port loopback and L2 learning. Run one at a time; Script C already orders BER after the traffic report.
* **PRBS takes the links down.** While `blanton_ber.sh` is armed the ports report DOWN and no traffic passes. That is the test working, not a fault. `clear` releases them.
* **`ce0` keeps running until you stop it.** If a run is interrupted between `start` and `stop`, the 100G port stays saturated with nothing in `show interfaces status` to hint at it. `blanton_traffic_linespeed stop` (or `bcmcmd -n <u> -c 'mirror port ce0 Mode=Off'`) ends it.
* **Two numbers must stay in step**: Script C's `sleep 30` and `blanton_ber.sh`'s `BER_INTERVAL`. Change one without the other and `report` reads an interval that has not finished accumulating — with no warning.
* **`FAN_SPEED` is 100.** This build runs the fans flat out unless you change `config.ttl`.
* **Declare the switch population** with `SWB_UNIT0` / `SWB_UNIT1`; traffic, the readiness gate and now the BER sweep all follow it.
* **PRBS on the two 100G uplinks (`port_prbs_monitor.sh`) is still not wired into the macros.** Unchanged from v1.0.9.
## 🔬 Not yet verified on hardware
Three things in this build were reasoned out rather than measured, and each has a one-command check:
* **The `ce0` ingress mirror.** `mirror port ce0 Mode=Ingress DestPort=ce0` should make the port circulate, but the hardware may refuse a mirror destination equal to its source. Check `show c | grep POK.ce0` twice ten seconds apart — the number must climb. The report cannot tell you: a one-shot burst is also `TX == RX` and also says PASS. Fallback is `tr 518 PortList=268`.
* **The 120s settle in `blanton_tr518.sh`.** If `tr 518`'s traffic is time-limited (its parameters include `runtime=1`, `CheckDataTime=200`), waiting 120s could mean measuring after the load has already dropped. Compare a power readback at 0s, 30s and 120s.
* **`test mode nr=no`** in `blanton_tr518.sh` is the derived inverse of the `nr=yes` that `start` sends; it is not part of the bench-verified sequence, and is off by default.
## 🔗 Links
* [ARCHITECTURE.md](https://etgit.et-wen.com/etwen/Blanton_TTL_Script/src/branch/main/ARCHITECTURE.md) — test flow, data models, constraints
* [CLAUDE.md](https://etgit.et-wen.com/etwen/Blanton_TTL_Script/src/branch/main/CLAUDE.md) — commands and the bench gotchas
**Full changelog:** [V1.0.11...V1.1.0](https://etgit.et-wen.com/etwen/Blanton_TTL_Script/compare/V1.0.11...V1.1.0)
docs/release-notes/v1.1.1.md
+42
View File
@@ -0,0 +1,42 @@
# v1.1.1 — A run no longer inherits the last one's leftovers
## 🐛 Bug fixes
**A previous run's jobs and session survived into the next one**
* Script A now clears the box before it starts: `hw-test-session finish`, `bgctl reset --yes`, `bgctl stop --all`, then `bgctl list` so you can see it came back empty.
* This matters after a run that ended badly — a closed Tera Term window, a DUT reboot mid-soak, a macro stopped by hand. The stress jobs kept running and the session stayed open, so the next run started on a box that was already loaded. Nothing failed; the numbers were just quietly wrong, and the only hint was a `bgctl list` nobody was reading.
* The `bgctl list` at the end is the point of the sequence, not decoration: it is the one line in the log that proves the DUT was idle when the run began.
## 📦 Downloads
| File | Contents |
|---|---|
| `Script_ABC_Blanton_V1.1.1.zip` | The full Tera Term working directory, including `Blanton_Script/` to copy onto the DUT |
**After copying to the DUT:**
```bash
chmod +x ~/Blanton_Script/*.sh # see below
grep -rlU $'\r' ~/Blanton_Script # expect no output
```
`blanton_ber.sh` is invoked by Script C as `./Blanton_Script/blanton_ber.sh`, so it needs the execute bit along with `bmc_monitor.sh` and `usb_target.sh` — and neither git nor a Windows/USB copy carries it reliably. Without the `chmod` the BER section fails with `Permission denied` and the log simply has no BER in it.
## ⚠️ Before you run
* **`hw-test-session finish` at the start will complain if no session is open.** That is expected on a fresh DUT and does not stop the run.
* **These three tests cannot share the switch.** `blanton_ber.sh`, `blanton_tr518.sh` and `blanton_traffic_linespeed` all take over port loopback and L2 learning. Script C already orders BER after the traffic report.
* **PRBS takes the links down** while `blanton_ber.sh` is armed. That is the test working, not a fault.
* **`ce0` keeps running until you stop it.** If a run is interrupted between `start` and `stop`, the 100G port stays saturated with nothing in `show interfaces status` to hint at it.
* **Two numbers must stay in step**: Script C's `sleep 30` and `blanton_ber.sh`'s `BER_INTERVAL`.
* **`FAN_SPEED` is 100** — the fans run flat out unless you change `config.ttl`.
* **Declare the switch population** with `SWB_UNIT0` / `SWB_UNIT1`.
* **PRBS on the two 100G uplinks (`port_prbs_monitor.sh`) is still not wired into the macros.**
* **The three items listed as unverified in v1.1.0 are still unverified**: the `ce0` ingress mirror, the 120s settle in `blanton_tr518.sh`, and `test mode nr=no` on stop. See [v1.1.0](https://etgit.et-wen.com/etwen/Blanton_TTL_Script/releases/tag/V1.1.0) for the one-command check on each.
## 🔗 Links
* [ARCHITECTURE.md](https://etgit.et-wen.com/etwen/Blanton_TTL_Script/src/branch/main/ARCHITECTURE.md) — test flow, data models, constraints
* [CLAUDE.md](https://etgit.et-wen.com/etwen/Blanton_TTL_Script/src/branch/main/CLAUDE.md) — commands and the bench gotchas
**Full changelog:** [V1.1.0...V1.1.1](https://etgit.et-wen.com/etwen/Blanton_TTL_Script/compare/V1.1.0...V1.1.1)
docs/release-notes/v1.1.2.md
+63
View File
@@ -0,0 +1,63 @@
# v1.1.2 — NFC tag reads are now watched for the whole soak, not sampled once
## ✨ New features
**Background NFC polling**
* New `nfc_polling.sh` runs `blantons_nfc_validate.py` over and over in the background and keeps score. `start` / `stop` / `status` / `tail` / `report` / `clear` / `fg`.
* **`report` works while the poll is still running.** It only reads the log, so it never disturbs the run — and it labels itself `RUNNING` so a mid-soak snapshot is not mistaken for the final answer:
```
state : RUNNING (pid=2240323) -- this is a snapshot, the count is still moving
rounds : 240
PASS : 238
FAIL : 2
ERROR : 0 (tool did not produce a verdict)
RESULT : FAIL
--- tags seen ---
046F7BD2142290 238
```
* **`ERROR` is counted apart from `FAIL`.** A round where the tool printed neither `[PASS]` nor `[FAIL]` — it crashed, the file was missing, it hung past the timeout — did not measure anything. That is a different problem from a tag that would not read, and rolling the two together hides whichever one you are not looking for.
* `report` also lists which NFCID1s were seen and how often, and the last ten failures with their timestamps and reasons.
* `start` clears the log first, so a report always describes the run you just did rather than everything since the DUT was built.
* Script A takes a 30-second NFC baseline, Script B starts the poll for the soak, Script C stops it with the other monitors and reports.
## 🐛 Bug fixes
**The NFC log never reached the USB stick**
* Script C copied `nfc_polling.log`; the file is `nfc_poll.log`. The `cp` failed, nothing checked it, and the run finished looking fine — you would only notice back at the desk with a job archive that had no NFC log in it.
## 📦 Downloads
| File | Contents |
|---|---|
| `Script_ABC_Blanton_V1.1.2.zip` | The full Tera Term working directory, including `Blanton_Script/` to copy onto the DUT |
**After copying to the DUT:**
```bash
chmod +x ~/Blanton_Script/*.sh # see below
grep -rlU $'\r' ~/Blanton_Script # expect no output
```
`blanton_ber.sh` and `nfc_polling.sh` are invoked by the macros through `./` or `~/`, so they need the execute bit along with `bmc_monitor.sh` and `usb_target.sh` — neither git nor a Windows/USB copy carries it reliably. `blantons_nfc_validate.py` does **not** need it: `nfc_polling.sh` calls it through `python3` precisely so one more `chmod` cannot be forgotten.
## ⚠️ Before you run
* **`nfc_polling.sh start` clears the log.** Script B starts a fresh poll for the soak, which wipes Script A's baseline log — the baseline numbers are already in the master console log by then, but the file is gone.
* **NFC log path is `~/Blanton_Script/log/nfc_poll.log`** and it is copied into the job directory by Script C for the USB archive.
* **These three tests cannot share the switch.** `blanton_ber.sh`, `blanton_tr518.sh` and `blanton_traffic_linespeed` all take over port loopback and L2 learning. Script C already orders BER after the traffic report.
* **PRBS takes the links down** while `blanton_ber.sh` is armed. That is the test working, not a fault.
* **`ce0` keeps running until you stop it.** An interrupted run leaves the 100G port saturated with nothing in `show interfaces status` to hint at it.
* **Two numbers must stay in step**: Script C's `sleep 30` and `blanton_ber.sh`'s `BER_INTERVAL`.
* **`FAN_SPEED` is 100** — the fans run flat out unless you change `config.ttl`.
* **Declare the switch population** with `SWB_UNIT0` / `SWB_UNIT1`.
* **PRBS on the two 100G uplinks (`port_prbs_monitor.sh`) is still not wired into the macros.**
* **The three items listed as unverified in v1.1.0 are still unverified**: the `ce0` ingress mirror, the 120s settle in `blanton_tr518.sh`, and `test mode nr=no` on stop. See [v1.1.0](https://etgit.et-wen.com/etwen/Blanton_TTL_Script/releases/tag/V1.1.0) for the one-command check on each.
## 🔗 Links
* [ARCHITECTURE.md](https://etgit.et-wen.com/etwen/Blanton_TTL_Script/src/branch/main/ARCHITECTURE.md) — test flow, data models, constraints
* [CLAUDE.md](https://etgit.et-wen.com/etwen/Blanton_TTL_Script/src/branch/main/CLAUDE.md) — commands and the bench gotchas
**Full changelog:** [V1.1.1...V1.1.2](https://etgit.et-wen.com/etwen/Blanton_TTL_Script/compare/V1.1.1...V1.1.2)
docs/release-notes/v1.1.3.md
+59
View File
@@ -0,0 +1,59 @@
# v1.1.3 — Margin now measures against what this platform actually runs at
## ✨ New features
**Per-CONN margin profiles for the switch boards**
* `combo_SWB_CONN13_high` / `_low` through `combo_SWB_CONN16_high` / `_low` replace the old `comboA` / `comboB` pair. Each file's per-channel percentages follow the rails on *that* board, so a CONN13 profile is no longer a rough fit for CONN16.
* SWB0 and SWB1 share a profile per CONN — the two boards carry identical rails and differ only by I2C bus.
* A high pass and a low pass are now the same run with `_high` swapped for `_low`.
* **A profile applied to the wrong CONN margins the wrong rails and says nothing.** The percentages are positional, so nothing detects the mismatch. `margin_apply_profile_all.sh` now names the right profile per board instead of one name for all nine.
## 🐛 Bug fixes
**`VNOM` was the spec value, not what the rails actually sit at**
* 86 of the 144 channels moved up between +0.8% and +2.5% to the measured median for this platform — `PVDD3_3V_SYNTH_LDO_*` 3.3 → 3.38, `P0V9_AVDD_*` 0.9 → 0.915, `PVDD0_8V_T3` 0.8 → 0.82, and so on.
* **This is not a display change.** `VNOM` is the denominator of `margin_status`'s deviation %, *and* the basis `margin_set` derives high / low / OV / UV from. A rail sitting steady at 0.756 V used to read `+0.80%` against a nominal 0.75 and now reads `0.00%`; and asking for `+3%` now lands on a different absolute voltage than it did last week.
* **Margin logs from before and after this build cannot be compared directly.** The numbers moved because the reference moved, not because the hardware did.
**The batch profile script pointed at files that no longer exist**
* `margin_apply_profile_all.sh` still named `comboA` for all nine boards. With `comboA.conf` removed, every board would have stopped at `Profile not found` — a nine-line wall of errors on a script that is normally left to run.
**The channel map CSV was stale**
* `docs/LTC2980_channel_map.csv` is generated from `settings/*.conf`, so all 86 changed rails were wrong in it. Regenerated with `tools/gen_channel_map.sh`. It is output, not source — regenerate it, never hand-edit it.
## 📦 Downloads
| File | Contents |
|---|---|
| `Script_ABC_Blanton_V1.1.3.zip` | The full Tera Term working directory, including `Blanton_Script/` to copy onto the DUT |
**After copying to the DUT:**
```bash
chmod +x ~/Blanton_Script/*.sh # see below
grep -rlU $'\r' ~/Blanton_Script # expect no output
```
`blanton_ber.sh` and `nfc_polling.sh` are invoked by the macros through `./` or `~/`, so they need the execute bit along with `bmc_monitor.sh` and `usb_target.sh` — neither git nor a Windows/USB copy carries it reliably.
## ⚠️ Before you run
* **Re-baseline your margin expectations.** Any pass/fail limits or golden logs derived from the old `VNOM` values need redoing against this build.
* **`margin_save` in any form writes NVM permanently** and now writes margin windows derived from the new reference. Run `margin_status_all.sh` first and never call it during a test.
* **SWB profiles are per-CONN.** Applying `combo_SWB_CONN13_high` to a CONN16 board is silently wrong.
* **These three tests cannot share the switch**: `blanton_ber.sh`, `blanton_tr518.sh` and `blanton_traffic_linespeed`.
* **PRBS takes the links down** while `blanton_ber.sh` is armed.
* **`ce0` keeps running until you stop it.**
* **Two numbers must stay in step**: Script C's `sleep 30` and `blanton_ber.sh`'s `BER_INTERVAL`.
* **`FAN_SPEED` is 100** — the fans run flat out unless you change `config.ttl`.
* **`nfc_polling.sh start` clears the log**, so Script B wipes Script A's NFC baseline file (the numbers are already in the console log).
* **The NFC tool is written for the customer's tag.** It polls Type A / B / F only and parses Type A strictly; a tag of another technology is never discovered and fails as `no RF interface activation notification received`. Without `--expected-id` it does not check identity, so a different tag of the same type still passes.
* **The three items listed as unverified in v1.1.0 are still unverified**: the `ce0` ingress mirror, the 120s settle in `blanton_tr518.sh`, and `test mode nr=no` on stop.
## 🔗 Links
* [ARCHITECTURE.md](https://etgit.et-wen.com/etwen/Blanton_TTL_Script/src/branch/main/ARCHITECTURE.md) — test flow, data models, constraints
* [CLAUDE.md](https://etgit.et-wen.com/etwen/Blanton_TTL_Script/src/branch/main/CLAUDE.md) — commands and the bench gotchas
* [LTC2980_channel_map.csv](https://etgit.et-wen.com/etwen/Blanton_TTL_Script/src/branch/main/docs/LTC2980_channel_map.csv) — all 144 margin channels with the new `VNOM`
**Full changelog:** [V1.1.2...V1.1.3](https://etgit.et-wen.com/etwen/Blanton_TTL_Script/compare/V1.1.2...V1.1.3)
docs/release-notes/v1.1.4.md
+61
View File
@@ -0,0 +1,61 @@
# v1.1.4 — A thermal and safety run that loads the box and watches the rails
## ✨ New features
**`4_Blanton_Script_thermal_safety.ttl`**
* A **standalone** script — it is not part of the A → B → C chain and is not started by any of them. Run it on its own when the question is thermal or safety rather than functional.
* Brings the DUT up the same way Script A does (login, session reset, fan speed, `wait_init`, DUT inventory, BMC, PCIe error clear, `pcie_bus`, PMON, dmesg), then loads it: `mlucas-avx2 -cpu 0:15` in the background and `blanton_tr518.sh start` on the data plane.
* Then loops every minute: platform data, **both switch boards' rail power** via `TH6_SWB0/1_power_readback.sh`, and `bgctl list` / `jobs`. That is the point of the script — power per rail under sustained full load, sampled over hours.
* **It has no teardown.** When you interrupt it the DUT is still in `port cd lb=mac`, `l2 learn off` and `test mode nr=yes`, and `mlucas-avx2` is still running. Run `blanton_tr518.sh stop` and `kill $(jobs -p)` before anything else uses the box — nothing in `show interfaces status` reveals the leftover state.
* **It cannot share a DUT with Script B.** Both take over the `cd` ports.
**Test flow diagram**
* `docs/Blanton_Test_Flow.drawio` draws all four scripts side by side, with the config flags that change each step marked, the one real `goto` in Script B drawn, and the manual handoffs between A → B → C shown as such.
## 🐛 Bug fixes
**The soak loop spent most of its minute reading margin**
* Script B's per-round loop is meant to be a quick sample. `margin_status_all.sh` walks nine LTC2980s over I2C and dominated the round. The scan moved to Script C, which takes it once before `show uptime`.
* **The trade-off is real and worth knowing**: margin is now only measured at the start (Script A) and the end (Script C). Drift that happens *during* the soak is no longer visible.
**`hw-test-session finish` ran from inside the session's own shell**
* Script C now sends `exit` and waits for `Script done` first, so `finish` runs in the login shell that opened the session.
**The new script arrived with LF line endings**
* Every other `.ttl` in the repo is CRLF, and `.gitattributes` marks `*.ttl` as `-text` — whatever is committed is exactly what Tera Term gets. Converted to CRLF to match.
## 📦 Downloads
| File | Contents |
|---|---|
| `Script_ABC_Blanton_V1.1.4.zip` | The full Tera Term working directory, including `Blanton_Script/` to copy onto the DUT |
**After copying to the DUT:**
```bash
chmod +x ~/Blanton_Script/*.sh # see below
grep -rlU $'\r' ~/Blanton_Script # expect no output
```
`blanton_ber.sh`, `nfc_polling.sh`, `blanton_tr518.sh` and the two `TH6_SWB*_power_readback.sh` are invoked through `./` or `~/`, so they need the execute bit along with `bmc_monitor.sh` and `usb_target.sh` — neither git nor a Windows/USB copy carries it reliably.
## ⚠️ Before you run
* **Script 4 leaves the switch loaded and looped back.** Always finish with `blanton_tr518.sh stop`. If the next test starts without it, traffic and BER results are meaningless and nothing warns you.
* **Do not run Script 4 and Script B on the same DUT.** Same ports, same L2 settings.
* **Margin is no longer sampled during the soak** — only Script A (start) and Script C (end).
* **Re-baseline your margin limits if you have not already**: `VNOM` became the measured median in v1.1.3, which moved both the deviation % and the margin window.
* **These three cannot share the switch**: `blanton_ber.sh`, `blanton_tr518.sh`, `blanton_traffic_linespeed`.
* **PRBS takes the links down** while `blanton_ber.sh` is armed.
* **`ce0` keeps circulating until you stop it.**
* **Two numbers must stay in step**: Script C's `sleep 30` and `blanton_ber.sh`'s `BER_INTERVAL`.
* **`FAN_SPEED` is 100** — relevant here more than anywhere: a thermal run at full fan is not the same test as one at 30%.
* **The three items listed as unverified in v1.1.0 are still unverified**: the `ce0` ingress mirror, the 120s settle in `blanton_tr518.sh`, and `test mode nr=no` on stop. The settle matters most for this release — Script 4 depends on `tr 518` still driving traffic minutes after it was started.
## 🔗 Links
* [Blanton_Test_Flow.drawio](https://etgit.et-wen.com/etwen/Blanton_TTL_Script/src/branch/main/docs/Blanton_Test_Flow.drawio) — the four scripts side by side
* [ARCHITECTURE.md](https://etgit.et-wen.com/etwen/Blanton_TTL_Script/src/branch/main/ARCHITECTURE.md) — test flow, data models, constraints
* [CLAUDE.md](https://etgit.et-wen.com/etwen/Blanton_TTL_Script/src/branch/main/CLAUDE.md) — commands and the bench gotchas
**Full changelog:** [V1.1.3...V1.1.4](https://etgit.et-wen.com/etwen/Blanton_TTL_Script/compare/V1.1.3...V1.1.4)
docs/release-notes/v1.1.5.md
+67
View File
@@ -0,0 +1,67 @@
# v1.1.5 — The stress jobs now last the whole soak
## 🐛 Bug fixes
**USB stress ran for sixty seconds of an overnight soak**
* `qfx5252-stress-usb` was started with `--runtime 60`. It finished a minute in and the USB path sat idle for the rest of the night. Nothing failed, nothing said so, and the run looked complete.
* SSD stress had the same shape at `--runtime 3600` — one hour of a soak that usually runs far longer.
* Both are now `--runtime 86400`, and the BMC DDR memtester lost its loop count (`64M 1` → `64M`) so it runs until it is stopped rather than finishing one pass.
* **86400 is 24 hours, not "forever".** A soak longer than a day leaves SSD and USB dead for the remainder. Script B prints `bgctl list` every round (since v1.0.10), so the shorter list is visible there — but nothing raises an alarm.
## ✨ New features
**Multiphase VRM margin**
* New `blanton_multiphase_margin.sh` drives the multiphase controllers on both switch boards over the native i2c buses — SWB0 on `/dev/i2c-13` and `-15`, SWB1 on `-14` and `-16`. 19 rails per board, 38 in all.
* `high3` / `low3` / `comboA` / `comboB` set the voltages and report one line per rail:
```
SWB0_0V9_ANLG0 - 0.930V Configure Done
SWB0_0V75_ANLG0 - 0.775V Configure Done
...
[ OK ] high3: 38 rail(s) configured
```
* `save` commits them. It has no per-rail mapping, so it reports as one operation: `Multiphase Save All`.
* `-u 0` / `-u 1` for a single board; rails belonging to the other board are skipped and counted separately, not failed.
* **`save` writes NVM permanently** (PMBus `STORE_USER_ALL`, and `0x17` on the TH6 core rail). A power cycle does not undo it.
* **These are not the LTC2980s that `margin.sh` drives.** The two tools reach the same rails from different sides and each assumes it is the only writer. There is no interlock — do not run both.
**Traffic bursts carry a random pattern**
* `blanton_traffic_linespeed` v0.7.0 appends `PatternRandom=yes` to every `tx`, `ce0` included. A fixed pattern can sit on a benign bit sequence for an entire run; a changing one is what makes a weak lane show itself.
* `-r no` forces the fixed pattern; `-r ""` leaves the argument off entirely, which is the pre-v0.7.0 wire format if a future SDK rejects it.
* Defaults change from `tx 100 length=512` to `tx 200 length=324`.
* **Counter totals are not comparable across this build**: 64800 bytes per burst instead of 51200, about 27% more. The PASS/FAIL cross-check compares a pair against each other and is unaffected — only absolute figures moved.
## 📦 Downloads
| File | Contents |
|---|---|
| `Script_ABC_Blanton_V1.1.5.zip` | The full Tera Term working directory, including `Blanton_Script/` to copy onto the DUT |
**After copying to the DUT:**
```bash
chmod +x ~/Blanton_Script/*.sh # see below
grep -rlU $'\r' ~/Blanton_Script # expect no output
```
`blanton_ber.sh`, `nfc_polling.sh`, `blanton_tr518.sh`, `blanton_multiphase_margin.sh` and the two `TH6_SWB*_power_readback.sh` are invoked through `./` or `~/`, so they need the execute bit along with `bmc_monitor.sh` and `usb_target.sh` — neither git nor a Windows/USB copy carries it reliably.
## ⚠️ Before you run
* **A soak longer than 24 hours needs the runtimes raised.** `--runtime 86400` is a ceiling; past it, SSD and USB are idle and only a shorter `bgctl list` hints at it.
* **`blanton_multiphase_margin.sh save` is permanent.** Read the rails back before committing, and never run it during a test.
* **Do not mix `blanton_multiphase_margin.sh` and `margin.sh`** — same rails, two different access paths, no interlock.
* **Traffic counters changed scale.** Any absolute thresholds taken from earlier logs need redoing.
* **Script 4 (thermal/safety) has no teardown** — finish with `blanton_tr518.sh stop` and `kill $(jobs -p)`.
* **These three cannot share the switch**: `blanton_ber.sh`, `blanton_tr518.sh`, `blanton_traffic_linespeed`.
* **Margin is only sampled at the start and end of a soak** (since v1.1.4), not during it.
* **`FAN_SPEED` is 100** — the fans run flat out unless you change `config.ttl`.
* **The three items listed as unverified in v1.1.0 are still unverified**: the `ce0` ingress mirror, the 120s settle in `blanton_tr518.sh`, and `test mode nr=no` on stop.
## 🔗 Links
* [Blanton_Test_Flow.drawio](https://etgit.et-wen.com/etwen/Blanton_TTL_Script/src/branch/main/docs/Blanton_Test_Flow.drawio) — the four scripts side by side
* [ARCHITECTURE.md](https://etgit.et-wen.com/etwen/Blanton_TTL_Script/src/branch/main/ARCHITECTURE.md) — test flow, data models, constraints
* [CLAUDE.md](https://etgit.et-wen.com/etwen/Blanton_TTL_Script/src/branch/main/CLAUDE.md) — commands and the bench gotchas
**Full changelog:** [V1.1.4...V1.1.5](https://etgit.et-wen.com/etwen/Blanton_TTL_Script/compare/V1.1.4...V1.1.5)
docs/release-notes/v1.1.6.md
+74
View File
@@ -0,0 +1,74 @@
# v1.1.6 — The PDB bricks were never being asked the right question
## 🐛 Bug fixes
**Every PDB reading was `NA`, and the cause was a page number written in the wrong base**
* The four ADPM12200 bricks put each measurement on its own PMBus PAGE, and the page has to be written before every read. The bring-up spreadsheet listed those page numbers in decimal but with an `0x` prefix, so four of the five selected the wrong page:
| Reading | Datasheet PAGE | Should send | Spreadsheet said |
|---|---|---|---|
| Vin | 9 | `0x09` | `0x00` |
| Iin | 10 | `0x0A` | `0x10` |
| Vout | 2 | `0x02` | `0x02` ✅ |
| Iout | 14 | `0x0E` | `0x14` |
| Temp | 18 | `0x12` | `0x18` |
* Only Vout worked — because 2 reads the same in either base. That is why Iin and Iout answered `0xFFFF` and the temperature answered `0x0000`, and why a Vin scaling had to be invented to make 50 V appear.
* `blanton_pwr_data.sh` sends no page at all (its PDB table has `page "-"`), which is the reason it reports the whole PDB section as `NA`.
## ✨ New features
**`pwr_brick.sh` — the five power bricks, read properly**
* `show` prints Vin / Iin / Vout / Iout / Temp for all five: `SWB0.PU207` (0x62), `SWB0.PU13` (0x63), `SWB1.PU332` (0x60), `SWB1.PU85` (0x61) and `CPB.PU37` (0x26). `-r` adds the raw words.
* Conversions come from the datasheet's DIRECT equation, `X = (1/m)(Y × 10⁻ᴿ − b)`, with Table 3's coefficients: voltage `Y × 8 mV`, current `Y × 0.04 A`, temperature `Y × 0.01 °C`.
* **Cross-checked, not assumed**: `READ_VOUT` returns `0x05D4` → 1492 × 8 = 11936 mV, which is exactly the figure `show platform voltage` reports for that rail from a completely separate sensor path.
* `CPB.PU37` is a different part — no page writes and its own scaling — and is handled separately.
* The datasheet is now in the repo (`docs/ADPM12200CMLZxx_DS_*.pdf`) so the pages and coefficients can be checked without hunting for it.
**Every value is validated before it is printed**
* This bus corrupts the **high byte only**. That turns `11.98 V` into `32.00 V` — positive, plausible in magnitude, and invisible to any "reject 0xFFFF" filter. Each value is re-read (up to `PB_TRIES`, default 8) until it is not `0xFFFF`, not `0x0000`, and lands inside a plausibility window.
* `0x0000` is rejected as a raw word for the same reason: on the temperature register it decodes to a perfectly believable 0 °C.
**Complementary margin profiles per board**
* `comboA` / `comboB` for CB and each SWB CONN. `comboB` is `comboA` with every direction flipped, so running both covers each rail high and low while its neighbours sit the other way.
* NC channels stay at `nominal` in both — there is nothing to margin on an unused rail (CONN14 CH10/11/13, CONN15 CH10).
**The BMC USB service log is captured again — to a file**
* Script C's `journalctl` dump had been commented out, so that service log reached nothing at all. It now runs with `-o short-iso` into `log/bmc_usb_net.log` and is copied into the job directory for the USB archive. The ISO timestamps line up with the other monitor logs, and `rm -f` first keeps the file to one run.
* **It is no longer printed to the console**, so the USB copy is the only copy. If that `cp` fails — and nothing checks it — the service log is gone. Check the job directory before packing up.
## 📦 Downloads
| File | Contents |
|---|---|
| `Script_ABC_Blanton_V1.1.6.zip` | The full Tera Term working directory, including `Blanton_Script/` to copy onto the DUT |
**After copying to the DUT:**
```bash
chmod +x ~/Blanton_Script/*.sh # see below
grep -rlU $'\r' ~/Blanton_Script # expect no output
```
`blanton_ber.sh`, `nfc_polling.sh`, `blanton_tr518.sh`, `blanton_multiphase_margin.sh`, `pwr_brick.sh` and the two `TH6_SWB*_power_readback.sh` are invoked through `./` or `~/`, so they need the execute bit along with `bmc_monitor.sh` and `usb_target.sh` — neither git nor a Windows/USB copy carries it reliably.
## ⚠️ Before you run
* **`READ_VIN` and `READ_IIN` are not in the datasheet's coefficient table.** They are decoded here with the voltage and current coefficients — consistent with a ~50 V input, but not stated by the datasheet. Anything quoting brick Vin should have that confirmed first. `PB_VIN_M` / `PB_IIN_M` are where to change it.
* **The BMC USB service log only exists on the USB stick.** It is not in the master console log any more.
* **`NA` has two meanings**: nothing readable, or read but outside its plausibility window. Use `PB_TRIES=1 ./Blanton_Script/pwr_brick.sh show -r` to see the unretried raw words and tell them apart.
* **Margin profiles are positional.** `comboA_SWB_CONN13` applied to a CONN16 board margins the wrong rails and nothing detects it.
* **`blanton_multiphase_margin.sh save` is permanent**, and it must not be mixed with `margin.sh` — same rails, two access paths, no interlock.
* **A soak longer than 24 hours needs the stress runtimes raised** — `--runtime 86400` is a ceiling.
* **Script 4 (thermal/safety) has no teardown** — finish with `blanton_tr518.sh stop` and `kill $(jobs -p)`.
* **These three cannot share the switch**: `blanton_ber.sh`, `blanton_tr518.sh`, `blanton_traffic_linespeed`.
* **`FAN_SPEED` is 100.**
* **The three items listed as unverified in v1.1.0 are still unverified**: the `ce0` ingress mirror, the 120s settle in `blanton_tr518.sh`, and `test mode nr=no` on stop.
## 🔗 Links
* [ARCHITECTURE.md](https://etgit.et-wen.com/etwen/Blanton_TTL_Script/src/branch/main/ARCHITECTURE.md) — test flow, data models, constraints
* [CLAUDE.md](https://etgit.et-wen.com/etwen/Blanton_TTL_Script/src/branch/main/CLAUDE.md) — commands and the bench gotchas
* [Blanton_Test_Flow.drawio](https://etgit.et-wen.com/etwen/Blanton_TTL_Script/src/branch/main/docs/Blanton_Test_Flow.drawio) — the four scripts side by side
**Full changelog:** [V1.1.5...V1.1.6](https://etgit.et-wen.com/etwen/Blanton_TTL_Script/compare/V1.1.5...V1.1.6)
docs/release-notes/v1.1.7.md
+73
View File
@@ -0,0 +1,73 @@
# v1.1.7 — A way back from a margin, and a reboot cycle that runs itself
## ✨ New features
**`blanton_multiphase_margin.sh normal` — put the rails back without a power cycle**
* `normal` returns all 38 multiphase rails to their nominal set point, with the same per-rail reporting as the margin profiles (`SWB0_0V9_ANLG0 - 0.930V Configure Done`). `-u 0|1|all` as usual.
* Until now the only way out of a margin was to power-cycle the DUT. That mattered more than it sounds: `save` run while the board was still margined would have written the offsets into NVM, where a power cycle does not help either.
* The commands it sends are in `tools/Multiphase_Normal.txt` for anyone driving the bench by hand.
> ⚠️ `TH6_CORE` is 0.8 V nominal but settles near **0.8591 V** once the load line is active. Reading back 0.859 after `normal` is the load line doing its job, not a failed write.
**`5_Blanton_Script_Reboot_Cycle.ttl` — an unattended reboot-cycle run**
* A standalone macro, like Script 4: it does **not** chain to A → B → C and does not use `hw-test-session`. Every cycle is a fresh boot, so there is nothing to carry over and nothing to tear down.
* Each round: login → `sudo -i` → `date -s` → fan speed → `wait_init` → **Check Pt1 … Pt13** → `show uptime` → `reboot` → wait for the next boot. The cycle number is printed in the banner of every round.
| | | | |
|---|---|---|---|
| **Pt1** DUT info | **Pt2** BMC info + tools | **Pt3** mgmt ping | **Pt4** NFC poll |
| **Pt5** SSD stress | **Pt6** USB stress | **Pt7** BMC USB net | **Pt8** port status + 15 s traffic |
| **Pt9** BER sweep | **Pt10** NVMe errors | **Pt11** platform data | **Pt12** dmesg i2c |
| **Pt13** PCIe error counters | | | |
* The USB step takes its device node from `usb_target.sh`, not a hard-coded `/dev/sda1`.
**The SSD and USB stress durations are declared in `config.ttl`**
* `SSD_RUNTIME` / `SSD_COUNT` and `USB_RUNTIME` / `USB_COUNT` replace the values that were hard-coded in Script B, so a site changes them in one place. `COUNT` is passed straight through as `--passes`.
## 🐛 Bug fixes
**Script B left the global `timeout` at 15 s for the rest of the cdc_ncm section**
* The NCM probe sets `timeout = 15` and restored it only at `:skip_ping` — which the *success* path reaches several `wait`s later. Until then every `wait` gave up after 15 s instead of blocking, and a `wait` that returns without eating the prompt puts the whole macro a beat ahead of the DUT. It is now restored on the success path too.
**`goto skip_ping` in the reboot-cycle macro had no label to jump to**
* The probe was copied out of Script B without its `:skip_ping` label. Tera Term does not check labels when it loads a macro — it raises the error only when it actually jumps, which here means only when the NCM interface is missing. The failure mode was an error dialog stopping the whole cycle, on the one run where something was already wrong. The label is there now, and the `timeout` is restored **before** the branch so one line covers both paths.
**Two check points both numbered 12**
* `Dmesg_i2c` and `PCIE Error Counters` both announced themselves as `Check Pt12`. The second is now `Pt13`; Pt1 … Pt13 are unique.
## 📦 Downloads
| File | Contents |
|---|---|
| `Script_ABC_Blanton_V1.1.7.zip` | The full Tera Term working directory, including `Blanton_Script/` to copy onto the DUT |
**After copying to the DUT:**
```bash
chmod +x ~/Blanton_Script/*.sh # see below
grep -rlU $'\r' ~/Blanton_Script # expect no output
```
`blanton_ber.sh`, `nfc_polling.sh`, `blanton_tr518.sh`, `blanton_multiphase_margin.sh`, `pwr_brick.sh` and the two `TH6_SWB*_power_readback.sh` are invoked through `./` or `~/`, so they need the execute bit along with `bmc_monitor.sh` and `usb_target.sh` — neither git nor a Windows/USB copy carries it reliably.
## ⚠️ Before you run
* **`--runtime` is the job's overall limit, not a per-pass one.** `qfx5252-stress-*` stops after `RUNTIME` seconds whatever `--passes` says, so `SSD_RUNTIME=600` is a **10 minute** stress, not 600 × `SSD_COUNT`. For a 24 hour soak set `RUNTIME` to `86400`. The shipped defaults are 600.
* **Script 5 has not been run on hardware yet.** Two things to confirm on the bench: that `wait "Booting in blind mode"` really appears in this build's boot output — it has no `timeout` guard, so a changed string waits forever — and that re-running `bmc-first-enroll` every cycle is safe.
* **Script 5 has no exit condition.** `while 1` with a `reboot` at the end of each round; stop it by closing the Tera Term macro.
* **`blanton_multiphase_margin.sh save` is permanent**, and must not be mixed with `margin.sh` — same rails, two access paths, no interlock. Never run it while the board is margined.
* **`READ_VIN` and `READ_IIN` are still not in the ADPM12200 coefficient table** — `pwr_brick.sh` decodes them with the voltage and current coefficients. Confirm before quoting brick Vin.
* **The BMC USB service log only exists on the USB stick.**
* **Script 4 (thermal/safety) has no teardown** — finish with `blanton_tr518.sh stop` and `kill $(jobs -p)`.
* **These three cannot share the switch**: `blanton_ber.sh`, `blanton_tr518.sh`, `blanton_traffic_linespeed`.
* **`FAN_SPEED` is 100.**
* **Still unverified from v1.1.0**: the `ce0` ingress mirror, the 120 s settle in `blanton_tr518.sh`, and `test mode nr=no` on stop.
## 🔗 Links
* [ARCHITECTURE.md](https://etgit.et-wen.com/etwen/Blanton_TTL_Script/src/branch/main/ARCHITECTURE.md) — test flow, data models, constraints
* [CLAUDE.md](https://etgit.et-wen.com/etwen/Blanton_TTL_Script/src/branch/main/CLAUDE.md) — commands and the bench gotchas
* [Blanton_Test_Flow.drawio](https://etgit.et-wen.com/etwen/Blanton_TTL_Script/src/branch/main/docs/Blanton_Test_Flow.drawio) — the scripts side by side
**Full changelog:** [V1.1.6...V1.1.7](https://etgit.et-wen.com/etwen/Blanton_TTL_Script/compare/V1.1.6...V1.1.7)
docs/release-notes/v1.1.8.md
+71
View File
@@ -0,0 +1,71 @@
# v1.1.8 — The CPU stress no longer dies with your terminal
## ✨ New features
**`mlucas` now runs as a systemd unit, so it survives a lost session**
* The AMD CPU load is started as `systemd-run --unit=mlucas-amm --property=Type=exec --property=Restart=always --property=RestartSec=2`, instead of being backgrounded with `&` in the login shell. Script B and the thermal/safety macro (Script 4) both use it.
* As a shell job it belonged to that one terminal: close Tera Term, drop the console, reconnect on a different session, and the load was gone — while `jobs` from the new session showed nothing to tell you. A multi-day soak could spend most of its length with an idle CPU and produce thermal numbers that looked fine because nothing was loading the part.
* `Restart=always` brings it back if it exits on its own, and the log is appended (`>>`) inside the unit while being truncated (`>`) once before the unit starts, so a restart adds to the run rather than erasing it.
* Script B now prints `systemctl is-active mlucas-amm` beside `jobs`, both in the one-shot check and in every pass of the monitor loop. One word — `active` — tells you the CPU is still loaded.
> The old `&` line is kept commented out directly above the new one, to fall back to if `systemd-run` is not available on a build.
**Script C stops the unit and brings its log home**
* `systemctl stop mlucas-amm` was added next to the existing `kill $(jobs -p)`, and `mlucas_amm_log` is copied into `/host/hw-eval/jobs/` with the other stress logs.
* `kill $(jobs -p)` cannot reach a systemd unit, so without this the load would have run straight through the post-test snapshot and into the next test — every temperature and power reading taken at full load, with nothing in `show interfaces status` to reveal it.
**`EN_timestamp` — turn the per-line log timestamp on or off from `config.ttl`**
* Script A's `logopen` takes its 5th argument from the new flag: `logopen filename 0 1 1 EN_timestamp`. The argument order (`<file> <binary> <append> <PlainText> <timestamp>`) is now spelled out above the call.
**`BMC_USB_RUNTIME` — the BMC USB ping duration is a knob, not a constant**
* It was hard-coded to `-w 14400` (4 hours), which no longer matched the soak lengths the SSD and USB knobs were being set to. The shipped default is `172800` (2 days).
**The shipped stress defaults are now one hour**
* `SSD_RUNTIME` and `USB_RUNTIME` go from 600 to `3600`. v1.1.7 shipped a 10 minute stress by default.
## 🐛 Bug fixes
**`publish.sh` produced a different bundle depending on whose machine it ran on**
* `rsync` copied whatever sat in `src/Script_ABC_Blanton/`, so a developer with the `hammer/` mlucas binaries in their working tree shipped a ~100 MB zip while a fresh clone shipped ~200 KB. `hammer/` is now excluded from the bundle and ignored by git.
* `publish.sh -h` also printed the first lines of code along with the usage text, and would have truncated the usage block as the header grew. It now reads the header up to the first line of code.
## 📦 Downloads
| File | Contents |
|---|---|
| `Script_ABC_Blanton_V1.1.8.zip` | The full Tera Term working directory, including `Blanton_Script/` to copy onto the DUT |
**After copying to the DUT:**
```bash
chmod +x ~/Blanton_Script/*.sh # see below
grep -rlU $'\r' ~/Blanton_Script # expect no output
ls ~/hammer/tools/amd/mlucas-avx2 # must already be there - see below
```
`blanton_ber.sh`, `nfc_polling.sh`, `blanton_tr518.sh`, `blanton_multiphase_margin.sh`, `pwr_brick.sh` and the two `TH6_SWB*_power_readback.sh` are invoked through `./` or `~/`, so they need the execute bit along with `bmc_monitor.sh` and `usb_target.sh` — neither git nor a Windows/USB copy carries it reliably.
## ⚠️ Before you run
* **Replace `config.ttl` along with the macros.** `EN_timestamp` and `BMC_USB_RUNTIME` are new, and Tera Term aborts the macro on an undefined variable rather than treating it as 0 — keeping an old `config.ttl` stops Script A at the `logopen` line.
* **`hammer/` is not in the bundle.** The ~99 MB of mlucas binaries comes with the DUT image, not from this repo. If `~/hammer/tools/amd/mlucas-avx2` is missing, Script B does not stop — it starts a unit that fails and is restarted every 2 seconds. Check for the file before you start.
* **The timestamp format is not in the macro.** `EN_timestamp` only decides whether there is one; the format lives in Tera Term's Setup → Additional settings → Log, stored in that PC's `TERATERM.INI`. Two benches running the same macro can produce differently stamped logs.
* **The three stress durations are deliberately different**: SSD and USB at 1 hour, the BMC USB ping at 2 days. Set each to match the soak you are actually running.
* **`--runtime` is the job's overall limit, not a per-pass one.** `qfx5252-stress-*` stops after `RUNTIME` seconds whatever `--passes` says. For a 24 hour soak set `RUNTIME` to `86400`.
* **`mlucas-amm` has not been run on hardware yet.** The unit resolves `~` through bash's fallback to the passwd entry, because systemd does not set `HOME` for a system service without `User=`. It should land on `/root/hammer`, the same path the interactive shell uses — confirm it on the bench, or change both paths to an absolute `/root/hammer/...`.
* **Script 4 uses the same unit but has no teardown.** The thermal/safety macro now starts `mlucas-amm` the same way Script B does, and it still ends at `while 1` — so stopping it means `blanton_tr518.sh stop` **and** `systemctl stop mlucas-amm`. Closing Tera Term does not stop the CPU load any more.
* **Script 5 (reboot cycle) is still unverified on hardware**, still has no exit condition, and `wait "Booting in blind mode"` still has no `timeout` guard.
* **`blanton_multiphase_margin.sh save` is permanent**, and must not be mixed with `margin.sh` — same rails, two access paths, no interlock.
* **`READ_VIN` and `READ_IIN` are still not in the ADPM12200 coefficient table.**
* **The BMC USB service log only exists on the USB stick.**
* **These three cannot share the switch**: `blanton_ber.sh`, `blanton_tr518.sh`, `blanton_traffic_linespeed`.
* **`FAN_SPEED` is 100.**
* **Still unverified from v1.1.0**: the `ce0` ingress mirror, the 120 s settle in `blanton_tr518.sh`, and `test mode nr=no` on stop.
## 🔗 Links
* [ARCHITECTURE.md](https://etgit.et-wen.com/etwen/Blanton_TTL_Script/src/branch/main/ARCHITECTURE.md) — test flow, data models, constraints
* [CLAUDE.md](https://etgit.et-wen.com/etwen/Blanton_TTL_Script/src/branch/main/CLAUDE.md) — commands and the bench gotchas
* [Blanton_Test_Flow.drawio](https://etgit.et-wen.com/etwen/Blanton_TTL_Script/src/branch/main/docs/Blanton_Test_Flow.drawio) — the scripts side by side
**Full changelog:** [V1.1.7...V1.1.8](https://etgit.et-wen.com/etwen/Blanton_TTL_Script/compare/V1.1.7...V1.1.8)
docs/release-notes/v1.2.0.md
+76
View File
@@ -0,0 +1,76 @@
# v1.2.0 — SerDes DSC capture, and the macro now waits on the DUT
## ✨ New features
**Full-machine SerDes DSC capture, before and after the soak**
* `bcm_dsc_scan.sh` runs `phydiag <port> dsc` through the Broadcom diag shell across the whole port list — one 100G port plus the 200G ranges, about 445 per unit, on both units — and writes the raw log under `Blanton_Script/log/`, then copies it to `/host/hw-eval/jobs/`.
* Script A takes a baseline and Script C takes a closing dump, so the pair brackets the stress run and the two are directly comparable.
* `-u 0` scans one unit, `-f <name>` names the log (`%u` → `u0`/`u1`, `%t` → timestamp), `-F` overwrites, `-n` dry runs, `-C` skips the copy. A name without `%u` gets `_u0` / `_u1` inserted automatically, so unit 1 can never overwrite unit 0.
* Every run ends with `### DSC_SCAN_DONE rc=<n>`. `rc=0` means every port returned a complete dump.
* `phydiag ... dsc` is read-only — it does not change any SerDes setting.
**`bcm_dsc_parse.sh` turns a raw DSC log into two CSVs**
* `<prefix>_lane.csv` — one row per lane: TXEQ, RXFFE, DFE, EYE, SNR and the rest.
* `<prefix>_pm.csv` — one row per `pm_id`: temperature, PLL, lane count, SNR/EYE statistics.
* POSIX `sh` + `awk`, no Python, so it runs on the DUT as happily as on a laptop. Lane rows are read by the order of their bracket groups rather than by fixed column positions, so the SDK re-spacing its output does not break parsing; a row that does not yield 9 groups is reported as `UNPARSED` on stderr instead of being parsed wrongly.
**`EN_TX_FIR` in `config.ttl` — the DSC scan is off by default**
* A full scan is about 10 minutes and both Script A and Script C do one, so the shipped default (`0`) keeps ~20 minutes out of a routine run. Set it to `1` when the SerDes data is what you are after.
**The macro now waits on the DUT instead of on itself**
* Every `pause N` in Scripts A, B and C became `sendln "sleep N"` followed by `wait prompt_sonic_root`.
* `pause` stopped the macro for N seconds without touching the DUT — the shell sat idle and the macro was guessing how long the previous command would take. On a loaded DUT the guess ran short and the next command went out before the previous one had finished, putting the whole run a beat ahead of the switch. Now the wait happens on the DUT and the macro resumes when the prompt actually comes back.
* It also means the wait appears in the console log with a timestamp, so a round that ran long is visible afterwards.
* Timings changed with it: the management-ping sample in Script A is 15 s (was 30), the settle after each traffic `clear` is 5 s (was 15). The traffic run itself stays 15 s and Script B's monitor loop stays 60 s.
## 🐛 Bug fixes
**The DSC scan only ever scanned one port — and reported success**
* The scan loop read its port list on stdin, and `bcmcmd` reads stdin too, so the first call swallowed the rest of the file and the loop ended after a single port.
* Nothing looked wrong. The log held one port marker and one dsc block, the marker-to-dump comparison passed because both numbers shrank together, the exit code was 0, and a 445-port scan simply finished in seconds.
* The loop now reads on file descriptor 3 and `bcmcmd` is given `< /dev/null`, and there is a new check that the number of iterations matches the number of ports in the list — a check that cannot be fooled by the loop ending early.
**Dead call sites removed from Scripts A, B and C**
* The commented-out 100G PRBS calls, a duplicated commented 100G port-status block in Script A, and the stale `bmc_monitor_ddr.sh` block in Script C have been deleted. They had been dead since bring-up.
* `port_prbs_monitor.sh` still ships and still runs by hand — but re-enabling it means writing the calls again, not un-commenting them.
## 🔧 Changes
* **Script C no longer prints the BMC poll log or the mlucas log to the console.** Both files are still copied to `/host/hw-eval/jobs/` and out to the USB stick with everything else; only the master log got shorter.
## 📦 Downloads
| File | Contents |
|---|---|
| `Script_ABC_Blanton_V1.2.0.zip` | The full Tera Term working directory, including `Blanton_Script/` to copy onto the DUT |
**After copying to the DUT:**
```bash
chmod +x ~/Blanton_Script/*.sh # bcm_dsc_scan.sh is invoked as ./Blanton_Script/... and needs it
grep -rlU $'\r' ~/Blanton_Script # expect no output
ls ~/hammer/tools/amd/mlucas-avx2 # must already be there
```
## ⚠️ Before you run
* **Replace `config.ttl` along with the macros.** `EN_TX_FIR` is new, and Tera Term aborts on an undefined variable rather than treating it as 0.
* **`bcm_dsc_scan.sh` needs the execute bit.** Script A and Script C invoke it as `./Blanton_Script/bcm_dsc_scan.sh`. Without `chmod +x` it fails with `Permission denied`, the macro walks straight past it, and Script C's four `cp` lines then each report a missing file.
* **The DSC scan shares the ports with `blanton_ber.sh`, `blanton_traffic_linespeed` and `blanton_tr518.sh`** — do not run it alongside any of them.
* **Script 4 and Script 5 still use `pause`.** Only A, B and C were converted.
* **`--runtime` is the job's overall limit, not a per-pass one.** `--passes` does not extend it; for a 24 hour soak set `RUNTIME` to `86400`.
* **Script 4 has no teardown**: finish it with `blanton_tr518.sh stop` **and** `systemctl stop mlucas-amm`.
* **Script 5 (reboot cycle) is still unverified on hardware**, has no exit condition, and its `wait "Booting in blind mode"` has no `timeout` guard.
* **`blanton_multiphase_margin.sh save` is permanent**, and must not be mixed with `margin.sh`.
* **`READ_VIN` and `READ_IIN` are still not in the ADPM12200 coefficient table.**
* **The BMC USB service log only exists on the USB stick.**
* **`FAN_SPEED` is 100.**
* **Still unverified from v1.1.0**: the `ce0` ingress mirror, the 120 s settle in `blanton_tr518.sh`, and `test mode nr=no` on stop.
## 🔗 Links
* [ARCHITECTURE.md](https://etgit.et-wen.com/etwen/Blanton_TTL_Script/src/branch/main/ARCHITECTURE.md) — test flow, data models, constraints
* [CLAUDE.md](https://etgit.et-wen.com/etwen/Blanton_TTL_Script/src/branch/main/CLAUDE.md) — commands and the bench gotchas
* [Blanton_Test_Flow.drawio](https://etgit.et-wen.com/etwen/Blanton_TTL_Script/src/branch/main/docs/Blanton_Test_Flow.drawio) — the scripts side by side
**Full changelog:** [V1.1.8...V1.2.0](https://etgit.et-wen.com/etwen/Blanton_TTL_Script/compare/V1.1.8...V1.2.0)
publish/publish.sh
+120
View File
@@ -0,0 +1,120 @@
#!/usr/bin/env bash
# =============================================================================
# publish.sh -- package src/Script_ABC_Blanton for delivery
# =============================================================================
# Version History:
# V1.0.0 2026-08-21 Initial. Copies src/Script_ABC_Blanton to
# publish/Script_ABC_Blanton_<Version>, taking <Version>
# from the "; Version : Vx.y.z" header of
# 1_Blanton_Script_A.ttl.
# V1.0.1 2026-09-06 Exclude hammer/ (the mlucas binaries) from the bundle,
# so the output no longer depends on whether the developer
# has them in their working tree.
# =============================================================================
#
# The version is READ FROM Script A rather than passed in, so the folder name
# can never disagree with the header the tester sees when they open the macro.
# Bump Script A's header first, then run this.
#
# Usage:
# ./publish/publish.sh # publish at Script A's version
# ./publish/publish.sh -v V1.0.4 # override the version
# ./publish/publish.sh -f # overwrite an existing output folder
# ./publish/publish.sh -z # also produce a .zip next to it
# ./publish/publish.sh -n # dry run: print what would happen
# =============================================================================
set -u
SCRIPT_DIR="$(cd -- "$(dirname -- "${BASH_SOURCE[0]}")" && pwd)"
REPO_ROOT="$(cd -- "${SCRIPT_DIR}/.." && pwd)"
SRC_DIR="${REPO_ROOT}/src/Script_ABC_Blanton"
OUT_ROOT="${SCRIPT_DIR}"
NAME="Script_ABC_Blanton"
VER=""; FORCE=0; ZIP=0; DRY=0
info() { printf '[\033[34mINFO\033[0m] %s\n' "$*"; }
ok() { printf '[\033[32m OK \033[0m] %s\n' "$*"; }
die() { printf '[\033[31mERR \033[0m] %s\n' "$*" >&2; exit 1; }
# Print the header block above, up to (but not including) the first line of
# code, so adding a Version History entry never truncates the usage text.
usage() { sed -n '2,/^set -u/p' "${BASH_SOURCE[0]}" | sed '$d' | sed 's/^# \{0,1\}//'; exit 0; }
while [ $# -gt 0 ]; do
case "$1" in
-v|--version) VER="${2:-}"; shift 2 ;;
-f|--force) FORCE=1; shift ;;
-z|--zip) ZIP=1; shift ;;
-n|--dry-run) DRY=1; shift ;;
-h|--help) usage ;;
*) die "unknown option '$1' (try -h)" ;;
esac
done
[ -d "${SRC_DIR}" ] || die "source not found: ${SRC_DIR}"
# --- version from Script A's header ------------------------------------------
# The .ttl files are CRLF, so strip the carriage return or it lands in the
# folder name and produces a directory no one can cd into.
if [ -z "${VER}" ]; then
A_TTL="${SRC_DIR}/1_Blanton_Script_A.ttl"
[ -f "${A_TTL}" ] || die "cannot read version: ${A_TTL} missing"
VER=$(grep -m1 -E '^;[[:space:]]*Version[[:space:]]*:' "${A_TTL}" \
| tr -d '\r' | sed -E 's/.*:[[:space:]]*//; s/[[:space:]]+$//')
[ -n "${VER}" ] || die "no '; Version : Vx.y.z' header in $(basename "${A_TTL}")"
info "version from $(basename "${A_TTL}") : ${VER}"
else
info "version (overridden) : ${VER}"
fi
case "${VER}" in
V[0-9]*) ;;
*) die "version '${VER}' does not look like Vx.y.z" ;;
esac
DEST="${OUT_ROOT}/${NAME}_${VER}"
info "source : ${SRC_DIR#${REPO_ROOT}/}"
info "destination : ${DEST#${REPO_ROOT}/}"
if [ -e "${DEST}" ]; then
[ "${FORCE}" = "1" ] || die "${DEST##*/} already exists (use -f to overwrite)"
[ "${DRY}" = "1" ] || rm -rf -- "${DEST}"
info "existing folder removed (-f)"
fi
if [ "${DRY}" = "1" ]; then
info "dry run: nothing copied"
exit 0
fi
# --- copy ---------------------------------------------------------------------
# Captured console logs are per-run and often carry DUT serials, so they are
# never shipped; the empty logs/ directory itself is kept because Script A's
# logopen writes into it.
#
# hammer/ is excluded as well: it is ~99 MB of mlucas ELF binaries that the DUT
# image already carries, and it is gitignored. Without this exclude the bundle
# would depend on whether the developer happened to have the binaries sitting in
# src/ - 100 MB from one machine, 200 KB from a fresh clone.
mkdir -p -- "${DEST}" || die "cannot create ${DEST}"
if command -v rsync >/dev/null 2>&1; then
rsync -a --exclude='*.log' --exclude='hammer/' "${SRC_DIR}/" "${DEST}/" \
|| die "rsync failed"
else
cp -a -- "${SRC_DIR}/." "${DEST}/" || die "cp failed"
find "${DEST}" -type f -name '*.log' -delete
rm -rf -- "${DEST}/hammer"
fi
# Tera Term's logopen target, in case the source tree never had one
mkdir -p -- "${DEST}/logs"
n_files=$(find "${DEST}" -type f | wc -l)
ok "${n_files} files -> ${DEST##*/}"
if [ "${ZIP}" = "1" ]; then
command -v zip >/dev/null 2>&1 || die "zip not installed"
( cd -- "${OUT_ROOT}" && rm -f -- "${NAME}_${VER}.zip" \
&& zip -qr "${NAME}_${VER}.zip" "${NAME}_${VER}" ) || die "zip failed"
ok "$(du -h "${OUT_ROOT}/${NAME}_${VER}.zip" | cut -f1) -> ${NAME}_${VER}.zip"
fi
src/Script_ABC_Blanton/1_Blanton_Script_A.ttl
+729 -12
View File
@@ -1,7 +1,7 @@
; =============================================================================
; Script A for Blanton
; Version : V1.0.2
; Date : 2026-08-17
; Version : V1.2.0
; Date : 2026-09-07
; Author : ETWen
; =============================================================================
; Version History:
@@ -14,7 +14,527 @@
; ScriptB Remove stress_hhmd, stress_pcie
; Blanton_Script Add blanton_traffic_linespeed.sh
; ScriptB/C Add Traffic Test
;
; V1.0.3 2026-08-21 utils/wait_init.ttl Created
; ScriptA Add Wait DUT Ready
; V1.0.4 2026-08-21 utils/wait_init.ttl Wait on bcmcmd port-up, count (both units > 216)
; utils/wait_init.ttl Add WT_UNIT0/WT_UNIT1, skip absent units
; ScriptA Add EEPROM info (hpe-eeprom-tlv --bus 4 --addr 0x50)
; ScriptA Remove empty Check History block
; ScriptA/B Disable lldp + config save before traffic (silent MAC)
; ScriptB Add sfputil lpmode off Ethernet513/514
; V1.0.5 2026-08-21 config.ttl Add SWB_UNIT0/SWB_UNIT1
; utils/wait_init.ttl Follow config.ttl SWB_UNIT0/SWB_UNIT1
; ScriptA/B/C Traffic follows SWB_UNIT: -u 0 / -u 1 / skip
; V1.0.6 2026-08-24 utils/show_dmesg.ttl Edited dmesg grep i2c & clear event
; ScriptA HW Test Session
; ScriptC HW Test Session Finish
; ScriptA bmc-first-enroll, bmc version/status
; ScriptB Stress test DDR, SSD, USB, BMC DDR, BMC USB Stress test
; ScriptC BMC USB Stress test result
; ScriptA DUT Info
; ScriptAC 10G/1G MGMT ping
; ScriptA Edited 100G Port Status
; ScriptA, utils/setup_pmon.ttl Add TPM
; ScriptAC NVME Error Info
; ScriptAC Add PCIe Summary
; V1.0.7 2026-08-25 config.ttl Add FAN_SPEED
; ScriptA Add Fan Ctrl (max31790 rebind + fan-speed-control.sh)
; ScriptA Clear /host/hw-eval/current/jobs before the run
; ScriptC Copy stress jobs log to USB, timestamped
; utils/wait_init.ttl WT_INTERVAL 10 -> 60, fix WT_MIN comments
; ScriptC Disable BMC USB journalctl dump
; V1.0.8 2026-08-25 Blanton_Script/bmc_monitor.sh Add BMC I2C write/read-back pattern test
; ScriptB Re-enable bmc_monitor.sh start
; ScriptC Re-enable bmc_monitor.sh stop + cat bmc_poll.log
; ScriptC Copy bmc_poll.log + mgmt_ping.log into jobs/ before the USB archive
; Blanton_Script/usb_target.sh Created - auto-detect USB device node / mount point
; ScriptB USB stress uses the detected node, not a hard-coded /dev/sda1
; ScriptB DDR memtester runs continuously (drop the 100-pass limit)
; ScriptC Move bgctl reset --yes after the USB archive
; Blanton_Script/mgmt_ping_monitor.sh V3.0.0 - both NICs ping simultaneously, accumulating
; + ARP warm-up so a stale neighbour entry is not counted as loss
; + stop renders last-N per NIC, stats, and both ip -s link show
; .gitignore Ignore monitor *.raw / *.pid / *.state
; ScriptA MGMT ping baseline 45s -> 30s, clear the log afterwards
; ScriptB Show mgmt_ping status after start
; ScriptC Show mgmt_ping status before stop, cat the report after
; V1.0.9 2026-08-26 Blanton_Script/port_prbs_monitor.sh Add 100G Port PRBS test
; start [both|a|b] - single port isolates a port fault from
; the DUT not coping with two PRBS streams at once
; !! TTL calls are commented out in A/B/C - still under bring-up
; ScriptA/B/C Job log path /host/hw-eval/current/jobs -> /host/hw-eval/jobs
; ScriptC Mount the USB (usb_target.sh) before copying the job logs
; ScriptC Reorder results: stress logs, then MGMT ping, then 100G status
; V1.0.10 2026-08-27 ScriptB Monitor loop lists the background jobs every round
; + bgctl list - platform jobs
; + jobs - shell jobs of the login shell
; + pause 60 - the loop used to run with no pause at all
; docs/LTC2980_channel_map.csv Channel / net / Vnom map built from settings/*.conf
; tools/gen_channel_map.sh Regenerates that CSV - the CSV is output, not source
; tools/100G_PRBS.txt Bench command references, kept for hand-run debug
; tools/TR518.txt TR518 = built-in packet test (swutil / bcmcmd tr 518)
; tools/fan_ctrl.txt MAX31790 rebind + fan-speed-control.sh
; V1.0.11 2026-08-28 LTC2980_Margin_Script/margin.sh v2.7.0 - margin_save fixes + two new subcommands
; STORE_USER_ALL (0x15) is now a PMBus send-byte, not
; 0x15 followed by a dummy 0x00 data byte. The LTC2977
; tolerated the old form, but it was the wrong protocol
; i2c: i2cset .. 0x15 c swb: cb_pmbus_write <ch> <addr> 0x15
; + margin_save all - every board in settings/ (9 boards,
; 18 chips), then re-init the one loaded beforehand
; + margin_save blanton - Blanton SONiC shortcut: all 18
; LTC2977 straight over the native i2c buses - no
; margin_init, no FPGA channel setup, no pcimem
; F3 Ch6->bus 13, Ch7->14, Ch8->15, Ch9->16
; board list = MARGIN_BLANTON_STORE at the top of margin.sh
; The store result is now checked - a NACK used to still
; print "Change Saved"
; MARGIN_STORE_SETTLE (0.5s) between stores; nothing in this
; tool polls the part's busy bit
; LTC2980_Margin_Script/README.md What each margin_save variant sends, and the
; FPGA-channel -> i2c-bus map
; LTC2980_Margin_Script/Ref/*.md 0x15 trace note corrected to send-byte
; LTC2980_Margin_Script/script/margin_save_all.sh Point at margin_save all; keep it for subsets
; config.ttl FAN_SPEED 30 -> 100 (full speed by default)
; V1.1.0 2026-08-28 Blanton_Script/blanton_ber.sh Add whole-switch SerDes BER test (PRBS via phydiag)
; init / start / report / stop / clear, -u 0|1|all
; report: one row per lane, PASS when BER < 1e-6, then
; a summary across units carrying the worst lane
; init also checks every lane locked - an unlocked lane
; still reports a BER, and it is a meaningless one
; !! PRBS takes the SerDes out of normal operation:
; links show DOWN, no traffic passes while it runs
; Blanton_Script/blanton_tr518.sh Add TR518 packet test - loads the switch so the rails
; can be measured under traffic
; start [-u 0|1] then settles 120s (TR_SETTLE_SEC), so
; the power read afterwards is loaded, not ramping
; stop = port cd lb=none, exactly what TR518.txt does;
; l2 learn / test mode are NOT put back - stop says so
; Blanton_Script/TH6_SWB{0,1}_power_readback.sh Read the sensor tables ONCE, not once per rail
; 38 'show platform' calls -> 2. The old loop sampled
; each rail at a different instant, so the total was a
; sum of readings seconds apart. Output format unchanged
; A rail missing from the table now warns on stderr
; instead of silently counting as 0 W
; Blanton_Script/blanton_traffic_linespeed.sh Add the 100G uplink (ce0, VLAN 138) to the test
; ce0 has no loopback partner and a switch will not send
; a frame back out its ingress port, so a tx burst was
; one round trip. An INGRESS MIRROR of ce0 back to ce0
; keeps it circulating until stop turns the mirror off
; !! stop MUST run - the loop does not end on its own
; report: ce0 is the last row; a summary at the bottom
; carries every unit's PASS / FAIL / NA totals
; ScriptC Run the BER sweep, after the traffic report so the
; two do not fight over the same ports
; Follows SWB_UNIT0/SWB_UNIT1 like the traffic block:
; -u 0 / -u 1 / skip, so a single-unit DUT is not asked
; for counters from a board it does not have
; tools/BER_Test.txt Bench command references for the two new scripts
; tools/100G_Traffic.txt
; tools/TR518.txt Corrected on the bench: port cd (not *:port all),
; testphase=1, and an explicit stop
; V1.1.1 2026-08-28 ScriptA Clear a leftover session before starting a new run
; hw-test-session finish -> bgctl reset --yes ->
; bgctl stop --all -> bgctl list (must come back empty)
; A run that ended badly leaves jobs holding CPU and a
; session open; the next run used to inherit both, and
; the stress numbers were quietly wrong because of it
; V1.1.2 2026-08-28 Blanton_Script/nfc_polling.sh Add background NFC tag polling
; start / stop / status / tail / report / clear / fg
; wraps blantons_nfc_validate.py; start clears the log
; first, so a report covers this run only
; report works WHILE polling - it only reads the log,
; and says RUNNING so a snapshot is not read as final
; Each round appends a machine-readable RESULT line, so
; the tally never depends on the tool's wording
; PASS / FAIL come from the tool's own summary; ERROR
; means it produced neither, which is a different fault
; from a tag that would not read - counted separately
; tail does NOT follow (tail -f never returns, and a
; macro waiting on the prompt would hang there)
; Runs the .py through python3, not ./ - the file is
; mode 100644 and a USB copy carries no execute bit
; Blanton_Script/blantons_nfc_validate.py Vendor NFC/NCI validation tool (unmodified)
; ScriptA NFC baseline: start -> status -> 30s -> stop -> report
; ScriptB Start NFC polling for the soak, then status
; ScriptC Stop NFC polling with the other monitors, report it
; next to the mgmt ping log, and copy nfc_poll.log to
; the job dir for the USB archive
; Fix: that cp said nfc_polling.log - the file is
; nfc_poll.log, so the NFC log never reached the USB
; V1.1.3 2026-08-30 LTC2980_Margin_Script/settings/*.conf VNOM is now the measured median, not the spec value
; 86 of 144 rails moved up +0.8% .. +2.5%
; (3.3 -> 3.38, 0.9 -> 0.915, 0.8 -> 0.82, ...)
; This is NOT display-only: VNOM is the denominator of
; margin_status deviation % AND the basis margin_set
; derives high/low/OV/UV from, so the whole margin
; window shifts with it
; !! margin logs from before/after cannot be compared
; LTC2980_Margin_Script/profiles/ Add per-CONN SWB profiles, drop comboA/comboB
; combo_SWB_CONN13..16_{high,low} - the percentages
; follow that board rails, so applying one to a
; different CONN margins the wrong things, silently
; SWB0 and SWB1 share a profile per CONN (same rails)
; LTC2980_Margin_Script/script/*.sh Fix: margin_apply_profile_all.sh still pointed every
; board at comboA, which this change deleted - all 9
; boards would have failed with "Profile not found"
; docs/LTC2980_channel_map.csv Regenerated (tools/gen_channel_map.sh) - it is output
; V1.1.4 2026-08-31 4_Blanton_Script_thermal_safety.ttl Add the thermal / safety run - a STANDALONE script,
; not part of the A -> B -> C chain
; Script A style setup (login, session, fan, wait_init,
; DUT info, BMC, PCIe clear, pcie_bus, pmon, dmesg)
; then FULL LOAD: mlucas-avx2 -cpu 0:15 in the
; background + blanton_tr518.sh start
; then while 1: setup_pmon + TH6_SWB0/SWB1 power
; readback + bgctl list + jobs, pause 60
; !! no teardown section: after you interrupt it the
; unit is still on port cd lb=mac / l2 learn off /
; test mode nr=yes - run blanton_tr518.sh stop
; !! it drives the same ports as traffic and BER, so it
; cannot share a DUT with Script B
; ScriptB Drop the margin scan from the soak loop
; The loop is a fast per-minute sample; margin_status
; walks 9 LTC2980 over I2C and dominated the round
; ScriptC Take the margin scan instead, once, before uptime
; Trade-off: no margin drift DURING the soak any more,
; only a start (Script A) and end (Script C) reading
; ScriptC exit + wait "Script done" before hw-test-session
; finish - leaves the session shell first, so finish
; runs in the login shell that opened it
; docs/Blanton_Test_Flow.drawio Add the A/B/C + thermal flow diagram
; V1.1.5 2026-09-01 ScriptB Stress jobs now last the whole soak
; BMC DDR memtester 64M 1 -> 64M (loop count
; dropped = runs until stopped)
; SSD --runtime 3600 -> 86400
; USB --runtime 60 -> 86400
; The USB one finished after 60 SECONDS, so an
; overnight run had USB idle for all but the first
; minute and nothing said so
; !! 86400 is 24h: a soak longer than that leaves SSD
; and USB dead for the remainder - the per-round
; bgctl list (V1.0.10) is where that shows up
; Blanton_Script/blanton_multiphase_margin.sh Add multiphase VRM margin over the native i2c buses
; high3 / low3 / comboA / comboB / save, -u 0|1|all
; 38 rails (19 per SWB), one line each:
; SWB0_0V9_ANLG0 - 0.930V Configure Done
; save has no per-rail map, prints Multiphase Save All
; !! save is STORE_USER_ALL - permanent, survives a
; power cycle
; !! these are NOT the LTC2980s margin.sh drives; the
; two tools reach the same rails from different
; sides - do not run both
; Blanton_Script/blanton_traffic_linespeed.sh v0.7.0 tx gains PatternRandom, defaults change
; tx 100 length=512 -> tx 200 length=324
; every burst now ends PatternRandom=yes, ce0 included
; A fixed pattern can sit on a benign bit sequence for
; a whole run; random is what exposes a weak lane
; -r no forces the fixed pattern, -r "" omits the
; argument entirely (pre-v0.7.0 wire format)
; !! bytes per burst went 51200 -> 64800 (+27%), so
; counter totals are not comparable across this
; build - the PASS/FAIL cross-check is unaffected
; tools/Multiphase_*.txt Bench command references for the new script
; V1.1.6 2026-09-02 Blanton_Script/pwr_brick.sh Add PDB / CPB power brick readings
; 5 devices, Vin / Iin / Vout / Iout / Temp:
; SWB0.PU207 0x62 SWB0.PU13 0x63
; SWB1.PU332 0x60 SWB1.PU85 0x61
; CPB.PU37 0x26
; The four ADPM12200 put each measurement on its own
; PMBus PAGE, so a PAGE write has to precede every
; read - blanton_pwr_data.sh sends none, which is why
; it reports the whole PDB table as NA
; Vin PAGE 9 Iin PAGE 10 Vout PAGE 2
; Iout PAGE 14 Temp PAGE 18
; !! the bring-up spreadsheet wrote those page numbers
; in decimal but with an 0x prefix (10 -> 0x10,
; 14 -> 0x14, 18 -> 0x18). Only Vout worked,
; because 2 reads the same either way
; Conversions are the datasheet DIRECT equation
; X = (1/m)(Y x 10^-R - b), Table 3: voltage Y x 8mV,
; current Y x 0.04A, temperature Y x 0.01C
; Checked: READ_VOUT 0x05D4 -> 11936 mV, the same
; figure show platform reports for that rail
; !! Table 3 does NOT list READ_VIN / READ_IIN; they
; borrow the voltage / current coefficients here
; Each value is re-read until it passes: not 0xFFFF,
; not 0x0000, and inside a plausibility window. This
; bus corrupts the HIGH BYTE only, which turns 11.98 V
; into 32.00 V - a value no all-ones filter catches
; docs/ADPM12200..._Datasheet_2025_12_19.pdf The brick datasheet the pages and coefficients above
; came from
; ScriptC Re-enable the BMC USB service log, and send it to
; a file instead of the console
; journalctl ... -o short-iso > log/bmc_usb_net.log
; then cp it into the job dir for the USB archive
; rm -f first, so the file is this run only
; -o short-iso gives it timestamps that line up with
; the other monitor logs
; !! it no longer appears in the master console log,
; so the USB copy is now the ONLY copy - if that
; cp fails the service log is gone
; LTC2980_Margin_Script/profiles/ Add comboA / comboB per board (CB + SWB CONN13..16)
; Checkerboard pair: comboB is comboA with every
; direction flipped, so running both covers each rail
; high and low while its neighbours sit the other way
; NC channels stay nominal in both (CONN14 CH10/11/13,
; CONN15 CH10) - nothing to margin on an unused rail
; V1.1.7 2026-09-04 Blanton_Script/blanton_multiphase_margin.sh v1.1.0 Add the 'normal' sub-command
; Puts all 38 rails back to their nominal set point,
; from tools/Multiphase_Normal.txt - same rails and the
; same per-rail reporting as the margin profiles
; Until now the only way back from a margin was a power
; cycle, and 'save' run while margined would have
; committed the offsets to NVM, where a power cycle does
; not help either
; !! TH6_CORE is 0.8 V nominal but settles near 0.8591 V
; once the load line is active - reading back 0.859
; after 'normal' is the load line, not a failed write
; tools/Multiphase_Normal.txt Bench command reference for the above
; 5_Blanton_Script_Reboot_Cycle.ttl Created Reboot-cycle run - a STANDALONE script, not
; chained to A -> B -> C and not using hw-test-session:
; every cycle is a fresh boot, so there is nothing to
; carry over and nothing to tear down
; while 1: login -> sudo -i -> date -s -> fans -> wait_init
; -> Check Pt1..Pt13 -> show uptime -> reboot ->
; wait 'Booting in blind mode'
; cnt_cycle is printed in the banner of every round
; Pt1 DUT info (boot/version/fwutil/syseeprom/ssdhealth/
; TPM/NVMe) Pt2 BMC info + source the bash tools
; Pt3 mgmt ping Pt4 NFC poll (20 s)
; Pt5 SSD stress Pt6 USB stress (node from
; usb_target.sh, not a fixed sda1)
; Pt7 BMC USB net Pt8 100G port status + 15 s traffic
; Pt9 BER sweep Pt10 NVMe error info
; Pt11 platform data Pt12 dmesg i2c
; Pt13 PCIe error counters + ras-mc-ctl
; !! there is NO exit condition - the only way to stop it
; is to close the Tera Term macro
; !! NOT verified on hardware yet
; The cdc_ncm probe sets timeout = 15 and restores it to 0
; BEFORE the if, so both branches are covered in one line -
; the ping block below it waits on a 'sleep 10', which is
; already two thirds of the cap on a loaded DUT
; The probe was copied from Script B without its :skip_ping
; label, so 'goto skip_ping' had no target. Tera Term only
; raises that when it actually jumps, i.e. only when the
; NCM interface is missing - the label is now there
; Renumbered the second 'Check Pt12' (PCIe error counters)
; to Pt13; Pt1..Pt13 are now unique
; ScriptB Restore timeout = 0 on the cdc_ncm success path too
; It was only restored at :skip_ping, which the success
; path reaches several waits later - until then every wait
; was capped at 15 s instead of blocking
; .gitignore Ignore tmp/ - scripts not yet verified on hardware
; blanton_reboottest.sh (the bash port of the reboot cycle,
; for running without Tera Term) lives there until it has
; been run on a DUT. Unverified scripts must not reach the
; publish bundle: the tester cannot tell which ones to
; trust once they are side by side in Blanton_Script/
; config.ttl Add SSD_RUNTIME / SSD_COUNT / USB_RUNTIME / USB_COUNT
; The SSD and USB stress durations were hard-coded in
; ScriptB (--runtime 86400 --passes 5 / 1); they are now
; declared in one place per site
; !! --runtime is the job's OVERALL limit, not per pass:
; qfx5252-stress-* stops at RUNTIME seconds whatever
; --passes says. RUNTIME 600 = a 10 minute stress,
; not 600 x COUNT. For a 24 h soak set RUNTIME 86400
; ScriptB Build the SSD / USB stress commands from those knobs
; sprintf2 cmd_ssd ... SSD_RUNTIME SSD_COUNT, and the same
; for USB; the old hard-coded lines are left commented out
; next to them
; V1.1.8 2026-09-06
; ScriptA Drive logopen's timestamp flag from EN_timestamp
; logopen filename 0 1 1 EN_timestamp, with the argument
; order spelled out above the call: <file> <binary>
; <append> <PlainText> <timestamp>
; binary must stay 0. In binary mode Tera Term writes the
; raw stream and both PlainText and the timestamp are
; ignored
; !! EN_timestamp has to exist in config.ttl. An undefined
; variable aborts the macro at logopen, it is not read
; as 0
; !! the timestamp FORMAT lives in TERATERM.INI (Setup >
; Additional settings > Log), so it follows the PC and
; not this script. Two testers can produce differently
; stamped logs from one macro
; ScriptB Run mlucas as a systemd unit, not a shell background job
; systemd-run --unit=mlucas-amm --property=Type=exec
; --property=Restart=always --property=RestartSec=2
; The '&' job belonged to the interactive shell: it died
; with the session, and 'jobs' could not see it from a
; reconnected one, so a soak that lost its terminal quietly
; stopped loading the CPU
; The log is truncated with '>' before the unit starts and
; appended with '>>' inside it, so a restart adds to the
; run instead of erasing it
; 'systemctl is-active mlucas-amm' now sits beside 'jobs',
; both in the one-shot check and in the monitor loop at the
; end
; !! the old '&' line is kept commented out directly above
; it, to fall back to if systemd-run is unavailable
; ScriptB Take the BMC USB ping duration from BMC_USB_RUNTIME
; sprintf2 cmd '... -w %d ...' ncm_if BMC_USB_RUNTIME. It
; was hard-coded to 14400 (4 h), which no longer matched
; the soak the SSD and USB knobs were set for
; ScriptC Stop mlucas-amm and copy its log to the USB stick
; utils/kill_all_process.ttl is only "kill $(jobs -p)", and
; a systemd unit is not a shell job
; ScriptB's change on its own would have left mlucas
; loading all 16 cores through ScriptC and into the next
; run, so every temperature and power reading after it
; would have been taken under load
; cp ~/hammer/tools/amd/mlucas_amm_log /host/hw-eval/jobs/
; joins the other stress logs
; !! ScriptB and ScriptC change together. Whoever moves a
; stress job to systemd owns the matching stop in
; ScriptC
; Script4 Use the same mlucas-amm systemd unit as ScriptB
; The thermal / safety macro started mlucas the same way
; ScriptB used to, with '&', so it had the same failure:
; the load quietly ended when the console went away, in the
; one test where a long steady full load is the whole point
; 'systemctl is-active mlucas-amm' joins 'bgctl list' and
; 'jobs' in the monitor loop
; !! Script4 still has no teardown section, so the matching
; stop is manual: blanton_tr518.sh stop AND systemctl
; stop mlucas-amm. Closing Tera Term no longer stops the
; CPU load, and 'kill $(jobs -p)' never reached a unit
; config.ttl Add EN_timestamp and BMC_USB_RUNTIME, raise stress runtimes
; EN_timestamp = 1 feeds ScriptA's logopen; BMC_USB_RUNTIME
; = 172800 feeds ScriptB's ping unit
; SSD_RUNTIME and USB_RUNTIME 600 -> 3600, so the shipped
; default is a one hour stress rather than the ten minutes
; V1.1.7 went out with
; !! --runtime is still the job's OVERALL limit. RUNTIME
; 3600 = one hour of stress; COUNT does not multiply it.
; For a 2 day soak set RUNTIME 172800
; .gitignore Ignore src/Script_ABC_Blanton/hammer/
; ~99 MB of unstripped mlucas ELF binaries (avx512 / avx2 /
; avx / sse2 / generic-c) that ScriptB and the thermal
; macro chmod and run on the DUT
; !! they are deliberately NOT in git. A binary tree that
; large is permanent once committed and every clone pays
; for it forever; the DUT image already carries hammer/
; publish/publish.sh Exclude hammer/ from the delivery bundle
; rsync copies whatever sits in src/, so a developer who
; happened to have the binaries locally would have shipped
; a 100 MB zip while a clone shipped 200 KB. The bundle is
; now the same either way
; V1.1.9 2026-09-07
; Blanton_Script/bcm_dsc_scan.sh Created V1.2.0 - batch SerDes DSC dump
; Runs bcmcmd -n <unit> -c "dsh -c 'phydiag <port> dsc'"
; over the whole port list (1 x 100G + 445 x 200G ranges),
; both units, and leaves the raw log in <script_dir>/log
; before copying it to /host/hw-eval/jobs
; -f names the log (%u -> u0/u1, %t -> timestamp), -F
; overwrites, -u picks one unit, -n dry runs, -C skips the
; copy. -f takes a filename only; the directory comes from
; -o
; bcmcmd exits 0 even when the diag shell rejects a
; command, so success is judged by counting 'SERDES DISPLAY
; DIAG DATA END' markers, not by the exit code - the same
; trap blanton_traffic_linespeed.sh hit
; Paths come from $0, not $HOME, because Script A runs it
; after sudo -i and a literal ~ would depend on the
; environment. Ends with '### DSC_SCAN_DONE rc=<n>' for a
; TTL wait to key on
; Non-tty output is one line per port instead of a progress
; bar, so it does not flood the Tera Term log
; !! phydiag dsc is read-only and does not change any
; SerDes setting, but a full scan is ~10 min per run.
; ScriptA and ScriptC each do one, so the test is ~20
; min longer than before. Do not set DELAY to 0
; Blanton_Script/bcm_dsc_parse.sh Created V1.0.0 - offline DSC log to CSV
; Host side. -i <raw log> -o <prefix> produces
; <prefix>_lane.csv (one row per lane: TXEQ / RXFFE / DFE /
; EYE / SNR) and <prefix>_pm.csv (one row per pm_id:
; temperature / PLL / lane count / SNR-EYE stats)
; POSIX sh + awk, mawk compatible, no Python. Lane rows are
; read by the order of their bracket groups rather than
; fixed columns, so re-spacing by the SDK does not break
; it; a row whose group count is not 9 is marked UNPARSED
; on stderr instead of being parsed wrongly
; SD / LCK sticky '*' flags are kept as separate columns
; and not interpreted; a BER field of '!chk_en' means the
; checker was off and is passed through unchanged
; ScriptA Collect the SerDes DSC baseline before 'show uptime'
; ./Blanton_Script/bcm_dsc_scan.sh -f
; blanton_dsc_ScriptA.log -F
; The name has no %u, so the script inserts _u0 / _u1
; itself and unit 1 cannot overwrite unit 0 - that is where
; the file names ScriptC copies come from
; ScriptA / ScriptB / ScriptC Remove the commented-out 100G PRBS blocks
; The port_prbs_monitor.sh calls had been commented out in
; all three since bring-up, together with a second copy of
; the 100G port status block in ScriptA and the stale
; bmc_monitor_ddr.sh block in ScriptC
; port_prbs_monitor.sh still ships and still runs by hand;
; only the dead call sites are gone
; ScriptC Collect the closing DSC dump and carry the four logs out
; ./Blanton_Script/bcm_dsc_scan.sh -f
; blanton_dsc_ScriptC.log -F, then cp of
; blanton_dsc_Script{A,C}_u{0,1}.log into
; /host/hw-eval/jobs/
; The scan already copies its own output there; these four
; are a second pass so a failed copy inside the scan still
; leaves the data on the USB stick
; Blanton_Script Both new scripts need the execute bit on the DUT
; !! git records them 100644 like every other .sh here, and
; ScriptA / ScriptC invoke them as
; ./Blanton_Script/bcm_dsc_scan.sh, so they join
; bmc_monitor.sh and friends in the chmod +x line after
; deployment. Without it both scans fail with Permission
; denied and the macro walks straight past it
; V1.2.0 2026-09-07
; Blanton_Script/bcm_dsc_scan.sh v1.3.0 bcmcmd was eating the port list
; The scan loop read the port file on stdin, and bcmcmd
; reads stdin too, so the first call swallowed the rest of
; the file and the loop ended after ONE port
; Nothing looked wrong: the log held one PORT marker and
; one dsc block, markers == dumps, exit code 0. A 445 port
; scan finished in seconds and reported success
; Fixed by reading the loop on fd 3 (done 3< "$PORTFILE")
; and giving bcmcmd < /dev/null
; Added a check that the iteration count equals the port
; list count. The marker / dump comparison cannot catch a
; loop that ends early, because both numbers shrink
; together; the Saved: line now reports dumps out of TOTAL,
; not out of markers
; !! this is the same bcmcmd trap
; blanton_traffic_linespeed.sh hit at v0.3.1, where only
; the first VLAN was configured. Every while ... done <
; file loop that calls bcmcmd needs < /dev/null - assume
; it will read stdin unless proven otherwise
; ScriptA / ScriptB / ScriptC Wait on the DUT with 'sleep', not on the macro with 'pause'
; pause N stops the macro for N seconds without touching
; the DUT: the shell sits idle and the macro is guessing
; how long the last command took. sendln "sleep N" + wait
; prompt_sonic_root moves the wait onto the DUT, so the
; macro resumes when the prompt actually comes back and the
; two cannot drift apart
; It also lands in the console log with a timestamp, so a
; round that ran long is visible afterwards instead of
; invisible
; Durations changed with it: ScriptA mgmt ping 30 -> 15 s;
; the settle after every traffic 'clear' 15 -> 5 s; the
; traffic run itself stays 15 s; ScriptB's monitor loop
; stays 60 s
; !! Script4 and Script5 were NOT converted and still use
; pause. The 'pause 1' at the top of ScriptB / ScriptC
; also stays - it only spaces the log header and runs
; before there is a prompt to wait for
; config.ttl Add EN_TX_FIR to gate the SerDes DSC scan
; EN_TX_FIR = 1 enables bcm_dsc_scan.sh in ScriptA and
; ScriptC, and the four cp lines that carry
; blanton_dsc_Script{A,C}_u{0,1}.log to /host/hw-eval/jobs.
; Default is 0
; A full scan is ~10 min and both scripts do one, so
; leaving it off keeps ~20 min out of a routine run. Turn
; it on when the SerDes data is what you are after
; ScriptC Stop printing the BMC poll and mlucas logs to the console
; cat bmc_poll.log and cat mlucas_amm_log are commented
; out. Both files are still copied to /host/hw-eval/jobs
; and out to the USB stick with everything else, so no data
; is lost - the master log is just shorter
; =============================================================================
include "config.ttl"
@@ -27,7 +547,11 @@ getdir mdir
if EN_log = 1 then
sprintf2 filename '%s\Logs\%s_%s_%s.log' mdir project_name strTestcase str_starttime
logopen filename 0 1 1 1
; logopen <file> <binary> <append> <PlainText> <timestamp>
; binary=0 text mode, so PlainText / timestamp are honoured
; append=1 keep earlier cycles, do not overwrite
; PlainText=1 strip the ANSI colour codes SONiC emits
logopen filename 0 1 1 EN_timestamp
endif
; ========== Root Login ==========
@@ -49,6 +573,86 @@ gettime timestr
sprintf2 cmd 'sudo date -s "%s %s"' datestr timestr
sendln cmd
;Stress log clear
wait prompt_sonic_root
sendln "rm /host/hw-eval/jobs/*"
; ========== HW Test Session ==========
; Clear session
wait prompt_sonic_root
sendln "hw-test-session finish"
wait prompt_sonic_root
sendln "bgctl reset --yes"
wait prompt_sonic_root
sendln "bgctl stop --all"
wait prompt_sonic_root
sendln "bgctl list"
wait prompt_sonic_root
sendln "hw-test-session start"
wait prompt_sonic_root
sendln "hw-test-session log"
wait prompt_sonic_root
sendln "hw-test-session status"
; ========== FAN SPEED ==========
wait prompt_sonic_root
sendln "echo 18-0020 > /sys/bus/i2c/drivers/max31790/unbind"
wait prompt_sonic_root
sendln "sleep .5"
wait prompt_sonic_root
sendln "echo 18-0020 > /sys/bus/i2c/drivers/max31790/bind"
wait prompt_sonic_root
sendln "echo 25-0020 > /sys/bus/i2c/drivers/max31790/unbind"
wait prompt_sonic_root
sendln "sleep .5"
wait prompt_sonic_root
sendln "echo 25-0020 > /sys/bus/i2c/drivers/max31790/bind"
wait prompt_sonic_root
sprintf2 fan_ctrl_cmd 'fan-speed-control.sh %d' FAN_SPEED
sendln fan_ctrl_cmd
wait "Set all configured fan channels to"
sendln "y"
; ========== Wait DUT Init ==========
include "utils/wait_init.ttl"
; ========== DUT Info ==========
wait prompt_sonic_root
sendln "show boot"
wait prompt_sonic_root
sendln "show version"
wait prompt_sonic_root
sendln "fwutil show status"
wait prompt_sonic_root
sendln "show system-memory"
wait prompt_sonic_root
sendln "show service"
wait prompt_sonic_root
sendln "show platform syseeprom"
wait prompt_sonic_root
sendln "show platform ssdhealth"
wait prompt_sonic_root
sendln "qfx5252-tpm-version"
wait prompt_sonic_root
sendln "/usr/sbin/nvme smart-log -H /dev/nvme0"
wait prompt_sonic_root
sendln "/usr/sbin/smartctl -x /dev/nvme0"
; ========== BMC version ==========
;wait prompt_sonic_root
;sendln "bmc-manager run 'cat /etc/issue'"
wait prompt_sonic_root
sendln "bmc-first-enroll"
wait prompt_sonic_root
sendln "bmc-manager version"
wait prompt_sonic_root
sendln "bmc-manager status"
; ========== Load Shell Script ==========
wait prompt_sonic_root
sendln "source ~/Blanton_Script/blanton_fpga_pcimem.sh"
@@ -72,14 +676,13 @@ include "utils/show_pcie_error_reg_DDR.ttl"
include "utils/show_pcie_error_reg_I210.ttl"
include "utils/show_pcie_error_reg_SSD.ttl"
wait prompt_sonic_root
sendln "/usr/sbin/ras-mc-ctl --summary"
; ========== Check PCIE tree + PCIE link status + GET PCIE bandwidth Test ==========
include "utils/pcie_bus.ttl"
; ========== Check History ==========
;wait prompt_sonic_root
;sendln "command"
; ========== Check Margin ==========
if EN_Margin = 1 then
include "utils/show_margin_status.ttl"
@@ -88,16 +691,130 @@ endif
; ========== TAKE DATA ==========
include "utils/setup_pmon.ttl"
include "utils/show_dmesg.ttl"
wait prompt_sonic_root
;include "utils/xxx.ttl"
;wait prompt_sonic_root
;flushrecv
; ========== TRAFFIC-SETUP-STAGE ==========
;sendln "command"
; ========== 10G/1G MGMT Ping Test ==========
wait prompt_sonic_root
sendln "./Blanton_Script/mgmt_ping_monitor.sh start"
wait prompt_sonic_root
sendln "sleep 15"
wait prompt_sonic_root
sendln "~/Blanton_Script/mgmt_ping_monitor.sh stop"
wait prompt_sonic_root
sendln "cat ~/Blanton_Script/log/mgmt_ping.log"
wait prompt_sonic_root
sendln "~/Blanton_Script/mgmt_ping_monitor.sh clear"
; ========== NFC Test ==========
wait prompt_sonic_root
sendln "~/Blanton_Script/nfc_polling.sh start"
wait prompt_sonic_root
sendln "~/Blanton_Script/nfc_polling.sh status"
wait prompt_sonic_root
sendln "sleep 30"
wait prompt_sonic_root
sendln "~/Blanton_Script/nfc_polling.sh stop"
wait prompt_sonic_root
sendln "~/Blanton_Script/nfc_polling.sh report"
; ========== 100G Port Status ==========
wait prompt_sonic_root
sendln "sudo sfputil lpmode off Ethernet513"
wait prompt_sonic_root
sendln "sudo sfputil lpmode off Ethernet514"
wait prompt_sonic_root
sendln "config interface -n asic0 startup Ethernet513"
wait prompt_sonic_root
sendln "config interface -n asic1 startup Ethernet514"
wait prompt_sonic_root
sendln "config save -y"
wait prompt_sonic_root
sendln "show interfaces status Ethernet513,Ethernet514"
; ========== First Traffic Test ==========
; Silent MAC
wait prompt_sonic_root
sendln "config feature state lldp disabled"
wait prompt_sonic_root
sendln "config save -y"
if SWB_UNIT0 = 1 && SWB_UNIT1 = 1 then
wait prompt_sonic_root
sendln "blanton_traffic_linespeed ps"
wait prompt_sonic_root
sendln "blanton_traffic_linespeed init"
wait prompt_sonic_root
sendln "blanton_traffic_linespeed clear"
wait prompt_sonic_root
sendln "sleep 5"
wait prompt_sonic_root
sendln "blanton_traffic_linespeed show"
wait prompt_sonic_root
sendln "blanton_traffic_linespeed start"
wait prompt_sonic_root
sendln "sleep 15"
wait prompt_sonic_root
sendln "blanton_traffic_linespeed stop"
wait prompt_sonic_root
sendln "blanton_traffic_linespeed report"
elseif SWB_UNIT0 = 1 && SWB_UNIT1 = 0 then
wait prompt_sonic_root
sendln "blanton_traffic_linespeed ps -u 0"
wait prompt_sonic_root
sendln "blanton_traffic_linespeed init -u 0"
wait prompt_sonic_root
sendln "blanton_traffic_linespeed clear -u 0"
wait prompt_sonic_root
sendln "sleep 5"
wait prompt_sonic_root
sendln "blanton_traffic_linespeed show -u 0"
wait prompt_sonic_root
sendln "blanton_traffic_linespeed start -u 0"
wait prompt_sonic_root
sendln "sleep 15"
wait prompt_sonic_root
sendln "blanton_traffic_linespeed stop -u 0"
wait prompt_sonic_root
sendln "blanton_traffic_linespeed report -u 0"
elseif SWB_UNIT0 = 0 && SWB_UNIT1 = 1 then
wait prompt_sonic_root
sendln "blanton_traffic_linespeed ps -u 1"
wait prompt_sonic_root
sendln "blanton_traffic_linespeed init -u 1"
wait prompt_sonic_root
sendln "blanton_traffic_linespeed clear -u 1"
wait prompt_sonic_root
sendln "sleep 5"
wait prompt_sonic_root
sendln "blanton_traffic_linespeed show -u 1"
wait prompt_sonic_root
sendln "blanton_traffic_linespeed start -u 1"
wait prompt_sonic_root
sendln "sleep 15"
wait prompt_sonic_root
sendln "blanton_traffic_linespeed stop -u 1"
wait prompt_sonic_root
sendln "blanton_traffic_linespeed report -u 1"
else
endif
if EN_TX_FIR = 1 then
; ========== Collect bcm dsc data ==========
wait prompt_sonic_root
sendln "./Blanton_Script/bcm_dsc_scan.sh -f blanton_dsc_ScriptA.log -F"
endif
; ========== Show Power on uptime ==========
wait prompt_sonic_root
sendln "show uptime"
sendln ""
wait prompt_sonic_root
messagebox 'Start Script B' 'Script A DONE'
src/Script_ABC_Blanton/2_Blanton_Script_B.ttl
+148 -28
View File
@@ -15,57 +15,177 @@ pause 1
;sendln "command"
; ========== AMD CPU STRESS TEST ==========
; Clear the log file first
wait prompt_sonic_root
sendln "> ~/hammer/tools/amd/mlucas_amm_log"
wait prompt_sonic_root
sendln 'chmod +x ~/hammer/tools/amd/mlucas-avx2'
wait prompt_sonic_root
sendln "~/hammer/tools/amd/mlucas-avx2 -s l -cpu 0:15 > ~/hammer/tools/amd/mlucas_amm_log 2>&1 &"
;sendln "~/hammer/tools/amd/mlucas-avx2 -s l -cpu 0:15 > ~/hammer/tools/amd/mlucas_amm_log 2>&1 &"
sendln "systemd-run --unit=mlucas-amm --property=Type=exec --property=Restart=always --property=RestartSec=2 /bin/bash -c '~/hammer/tools/amd/mlucas-avx2 -s l -cpu 0:15 >> ~/hammer/tools/amd/mlucas_amm_log 2>&1'"
; ========== BMC DDR Stress Test ==========
;wait prompt_sonic_root
;sendln "./Blanton_Script/bmc_monitor_ddr.sh start"
;wait prompt_sonic_root
;sendln "./Blanton_Script/bmc_monitor.sh start"
wait prompt_sonic_root
;sendln "bgctl run bmc-manager run '/usr/bin/memtester 64M 1'"
sendln "bgctl run bmc-manager run '/usr/bin/memtester 64M'" ; Continue Execture
; ========== BMC Monitor Test ==========
wait prompt_sonic_root
sendln "./Blanton_Script/bmc_monitor.sh start"
; ========== DDR MEMORY STRESS TEST ==========
;wait prompt_sonic_root
;sendln "bgctl run /usr/sbin/memtester 1G 100"
wait prompt_sonic_root
sendln "python ~/hammer/tools/stress_mem.py &"
wait prompt_sonic_root
sendln "python ~/hammer/tools/stress_mem.py &"
wait prompt_sonic_root
sendln "python ~/hammer/tools/stress_mem.py &"
wait prompt_sonic_root
sendln "python ~/hammer/tools/stress_mem.py &"
wait prompt_sonic_root
sendln "python ~/hammer/tools/stress_mem.py &"
sendln "bgctl run /usr/sbin/memtester 1G" ; Continue Execture
; ========== SSD read/write ==========
sprintf2 cmd_ssd "bgctl run qfx5252-stress-ssd 1G --runtime %d --passes %d --write --force --log /host/hw-eval/jobs/qfx5252-stress-ssd.log" SSD_RUNTIME SSD_COUNT
wait prompt_sonic_root
sendln "python ~/hammer/tools/stress_ssd.py &"
;sendln "bgctl run qfx5252-stress-ssd 1G --runtime 86400 --passes 5 --write --force --log /host/hw-eval/jobs/qfx5252-stress-ssd.log"
sendln cmd_ssd
; ========== USB read/write ==========
; ---- Get USB partition node -> usb_dev ----
usb_dev = ''
wait prompt_sonic_root
sendln "python ~/hammer/tools/stress_usb.py &"
sendln 'D=$(bash ~/Blanton_Script/usb_target.sh -o dev 2>/dev/null); echo "<<D""EV=${D:-NONE}>>"'
waitregex '<<DEV=([^>]*)>>'
usb_dev = groupmatchstr1
wait prompt_sonic_root
;sprintf2 cmd "bgctl run qfx5252-stress-usb %s 256M --runtime 86400 --passes 1 --write --log /host/hw-eval/jobs/qfx5252-stress-usb.log" usb_dev
sprintf2 cmd "bgctl run qfx5252-stress-usb %s 256M --runtime %d --passes %d --write --log /host/hw-eval/jobs/qfx5252-stress-usb.log" usb_dev USB_RUNTIME USB_COUNT
sendln cmd
;wait prompt_sonic_root
;sendln "bgctl run qfx5252-stress-usb /dev/sda1 256M --runtime 60 --passes 1 --write --log /host/hw-eval/qfx5252-stress-usb.log"
; ========== SHOW Background job ==========
wait prompt_sonic_root
sendln "jobs"
wait prompt_sonic_root
sendln "systemctl is-active mlucas-amm"
wait prompt_sonic_root
sendln "bgctl list"
; ========== BMC USB Test ==========
wait prompt_sonic_root
sendln 'echo "NCMIF=$(ls -d /sys/bus/usb/drivers/cdc_ncm/*/net/* 2>/dev/null | head -n 1 | xargs -r basename)"'
timeout = 15
waitregex 'NCMIF=[A-Za-z0-9_-]+'
if result = 0 then
messagebox 'cdc_ncm interface not found. Ping test skipped.' 'ERROR'
goto skip_ping
endif
timeout = 0
strlen matchstr
cut_len = result - 6 ; 'NCMIF=' = 6 chars
strcopy matchstr 7 cut_len ncm_if ; -> ncm_if = "eth2" / "eth3"
sprintf2 cmd 'ip -br link show %s' ncm_if
wait prompt_sonic_root
sendln cmd
wait prompt_sonic_root
sendln 'systemctl stop qfx5252-bmc-usb-net-test.service 2>/dev/null || true'
wait prompt_sonic_root
sendln 'systemctl reset-failed qfx5252-bmc-usb-net-test.service 2>/dev/null || true'
sprintf2 cmd 'systemd-run --unit=qfx5252-bmc-usb-net-test --property=Type=exec /usr/bin/ping -I %s -i 1 -W 2 -w %d 192.168.200.200' ncm_if BMC_USB_RUNTIME
wait prompt_sonic_root
sendln cmd
:skip_ping
; restore the default (no cap): the traffic init below walks 108 VLANs per
; unit and takes far longer than the 15 s set for the NCM probe above.
timeout = 0
; ========== 10G/1G MGMT Ping Test ==========
wait prompt_sonic_root
sendln "./Blanton_Script/mgmt_ping_monitor.sh start"
wait prompt_sonic_root
sendln "sleep 3"
wait prompt_sonic_root
sendln "./Blanton_Script/mgmt_ping_monitor.sh status"
; ========== NFC Test ==========
wait prompt_sonic_root
sendln "~/Blanton_Script/nfc_polling.sh start"
wait prompt_sonic_root
sendln "~/Blanton_Script/nfc_polling.sh status"
; ========== 100G Port ==========
wait prompt_sonic_root
sendln "show interfaces status Ethernet513,Ethernet514"
; ========== Take one round of eye measurement on uplink ports ==========
; ========== Traffic START ==========
; Silent MAC
wait prompt_sonic_root
sendln "blanton_traffic_linespeed ps -u 0"
sendln "config feature state lldp disabled"
wait prompt_sonic_root
sendln "blanton_traffic_linespeed init -u 0"
wait prompt_sonic_root
sendln "blanton_traffic_linespeed clear -u 0"
wait prompt_sonic_root
pause 3
sendln "blanton_traffic_linespeed show -u 0"
wait prompt_sonic_root
sendln "blanton_traffic_linespeed start -u 0"
sendln "config save -y"
if SWB_UNIT0 = 1 && SWB_UNIT1 = 1 then
wait prompt_sonic_root
sendln "blanton_traffic_linespeed ps"
wait prompt_sonic_root
sendln "blanton_traffic_linespeed init"
wait prompt_sonic_root
sendln "blanton_traffic_linespeed clear"
wait prompt_sonic_root
sendln "sleep 5"
wait prompt_sonic_root
sendln "blanton_traffic_linespeed show"
wait prompt_sonic_root
sendln "blanton_traffic_linespeed start"
elseif SWB_UNIT0 = 1 && SWB_UNIT1 = 0 then
wait prompt_sonic_root
sendln "blanton_traffic_linespeed ps -u 0"
wait prompt_sonic_root
sendln "blanton_traffic_linespeed init -u 0"
wait prompt_sonic_root
sendln "blanton_traffic_linespeed clear -u 0"
wait prompt_sonic_root
sendln "sleep 5"
wait prompt_sonic_root
sendln "blanton_traffic_linespeed show -u 0"
wait prompt_sonic_root
sendln "blanton_traffic_linespeed start -u 0"
elseif SWB_UNIT0 = 0 && SWB_UNIT1 = 1 then
wait prompt_sonic_root
sendln "blanton_traffic_linespeed ps -u 1"
wait prompt_sonic_root
sendln "blanton_traffic_linespeed init -u 1"
wait prompt_sonic_root
sendln "blanton_traffic_linespeed clear -u 1"
wait prompt_sonic_root
sendln "sleep 5"
wait prompt_sonic_root
sendln "blanton_traffic_linespeed show -u 1"
wait prompt_sonic_root
sendln "blanton_traffic_linespeed start -u 1"
else
endif
; ========== Get data every 10mins ==========
; ========== Monitor loop: platform data + background jobs (sleep 60s per round) ==========
while 1
include "utils/setup_pmon.ttl"
; ========== Check Margin ==========
if EN_Margin = 1 then
include "utils/show_margin_status.ttl"
endif
endwhile
wait prompt_sonic_root
sendln "bgctl list"
wait prompt_sonic_root
sendln "jobs"
wait prompt_sonic_root
sendln "systemctl is-active mlucas-amm"
wait prompt_sonic_root
sendln "sleep 60"
endwhile
src/Script_ABC_Blanton/3_Blanton_Script_C.ttl
+196 -6
View File
@@ -12,6 +12,27 @@ pause 1
; ========== Kill Process ==========
include "utils/kill_all_process.ttl"
wait prompt_sonic_root
sendln "systemctl is-active mlucas-amm"
wait prompt_sonic_root
sendln "systemctl stop mlucas-amm"
; bgctrl all stop
wait prompt_sonic_root
sendln "bgctl stop --all"
wait prompt_sonic_root
sendln "bgctl stop --all"
; BMC USB Test STOP
wait prompt_sonic_root
sendln "systemctl stop qfx5252-bmc-usb-net-test.service"
; 10G/1G MGMT Test STOP
wait prompt_sonic_root
sendln "~/Blanton_Script/mgmt_ping_monitor.sh status"
wait prompt_sonic_root
sendln "~/Blanton_Script/mgmt_ping_monitor.sh stop"
wait prompt_sonic_root
sendln "~/Blanton_Script/nfc_polling.sh stop"
; ========== TAKE DATA ==========
include "utils/setup_pmon.ttl"
include "utils/show_dmesg.ttl"
@@ -25,17 +46,186 @@ include "utils/show_pcie_error_reg_DDR.ttl"
include "utils/show_pcie_error_reg_I210.ttl"
include "utils/show_pcie_error_reg_SSD.ttl"
wait prompt_sonic_root
sendln "/usr/sbin/ras-mc-ctl --summary"
; ========== BMC Monitor TAKE DATA ==========
wait prompt_sonic_root
sendln "./Blanton_Script/bmc_monitor.sh stop"
; wait prompt_sonic_root
; sendln "cat ./Blanton_Script/log/bmc_poll.log"
; ========== BMC USB Test result ==========
wait prompt_sonic_root
sendln "rm -f ~/Blanton_Script/log/bmc_usb_net.log"
wait prompt_sonic_root
sendln "journalctl -u qfx5252-bmc-usb-net-test.service --no-pager -o short-iso > ~/Blanton_Script/log/bmc_usb_net.log"
; ========== CHECK Stress results ==========
; wait prompt_sonic_root
; sendln "cat ~/hammer/tools/amd/mlucas_amm_log"
wait prompt_sonic_root
sendln "cat ~/hammer/tools/amd/mlucas_amm_log"
sendln "cat /host/hw-eval/jobs/qfx5252-stress-ssd.log"
wait prompt_sonic_root
sendln "cat ~/hammer/tools/log.stress_ssd"
sendln "cat /host/hw-eval/jobs/qfx5252-stress-usb.log"
; ========== 10G/1G MGMT Test result ==========
wait prompt_sonic_root
sendln "cat ~/Blanton_Script/log/mgmt_ping.log"
; ========== NFC Test result ==========
wait prompt_sonic_root
sendln "~/Blanton_Script/nfc_polling.sh report"
; ========== 100G Port ==========
wait prompt_sonic_root
sendln "show interfaces status Ethernet513,Ethernet514"
; ========== CHECK Traffic counters ==========
wait prompt_sonic_root
sendln "blanton_traffic_linespeed stop -u 0"
wait prompt_sonic_root
sendln "blanton_traffic_linespeed report -u 0"
if SWB_UNIT0 = 1 && SWB_UNIT1 = 1 then
wait prompt_sonic_root
sendln "blanton_traffic_linespeed stop"
wait prompt_sonic_root
sendln "blanton_traffic_linespeed report"
elseif SWB_UNIT0 = 1 && SWB_UNIT1 = 0 then
wait prompt_sonic_root
sendln "blanton_traffic_linespeed stop -u 0"
wait prompt_sonic_root
sendln "blanton_traffic_linespeed report -u 0"
elseif SWB_UNIT0 = 0 && SWB_UNIT1 = 1 then
wait prompt_sonic_root
sendln "blanton_traffic_linespeed stop -u 1"
wait prompt_sonic_root
sendln "blanton_traffic_linespeed report -u 1"
else
endif
; ========== BER ==========
; PRBS takes the SerDes out of normal operation, so this runs AFTER the
; traffic report. sleep 30 matches blanton_ber.sh BER_INTERVAL - reporting
; earlier reads an interval that has not finished accumulating.
if SWB_UNIT0 = 1 && SWB_UNIT1 = 1 then
wait prompt_sonic_root
sendln "./Blanton_Script/blanton_ber.sh init"
wait prompt_sonic_root
sendln "./Blanton_Script/blanton_ber.sh start"
wait prompt_sonic_root
sendln "sleep 30"
wait prompt_sonic_root
sendln "./Blanton_Script/blanton_ber.sh report"
wait prompt_sonic_root
sendln "./Blanton_Script/blanton_ber.sh stop"
wait prompt_sonic_root
sendln "./Blanton_Script/blanton_ber.sh clear"
elseif SWB_UNIT0 = 1 && SWB_UNIT1 = 0 then
wait prompt_sonic_root
sendln "./Blanton_Script/blanton_ber.sh init -u 0"
wait prompt_sonic_root
sendln "./Blanton_Script/blanton_ber.sh start -u 0"
wait prompt_sonic_root
sendln "sleep 30"
wait prompt_sonic_root
sendln "./Blanton_Script/blanton_ber.sh report -u 0"
wait prompt_sonic_root
sendln "./Blanton_Script/blanton_ber.sh stop -u 0"
wait prompt_sonic_root
sendln "./Blanton_Script/blanton_ber.sh clear -u 0"
elseif SWB_UNIT0 = 0 && SWB_UNIT1 = 1 then
wait prompt_sonic_root
sendln "./Blanton_Script/blanton_ber.sh init -u 1"
wait prompt_sonic_root
sendln "./Blanton_Script/blanton_ber.sh start -u 1"
wait prompt_sonic_root
sendln "sleep 30"
wait prompt_sonic_root
sendln "./Blanton_Script/blanton_ber.sh report -u 1"
wait prompt_sonic_root
sendln "./Blanton_Script/blanton_ber.sh stop -u 1"
wait prompt_sonic_root
sendln "./Blanton_Script/blanton_ber.sh clear -u 1"
else
endif
if EN_TX_FIR = 1 then
; ========== Collect bcm dsc data ==========
wait prompt_sonic_root
sendln "./Blanton_Script/bcm_dsc_scan.sh -f blanton_dsc_ScriptC.log -F"
endif
; ========== NVME Err Info ==========
wait prompt_sonic_root
sendln "/usr/sbin/nvme smart-log -H /dev/nvme0"
wait prompt_sonic_root
sendln "/usr/sbin/smartctl -x /dev/nvme0"
wait prompt_sonic_root
sendln "show reboot-cause"
; ========== Check Margin ==========
if EN_Margin = 1 then
include "utils/show_margin_status.ttl"
endif
; ========== Show Power on uptime ==========
wait prompt_sonic_root
sendln "show uptime"
; ---- Get USB partition node -> usb_dev ----
usb_dev = ''
wait prompt_sonic_root
sendln 'D=$(bash ~/Blanton_Script/usb_target.sh -o dev 2>/dev/null); echo "<<D""EV=${D:-NONE}>>"'
waitregex '<<DEV=([^>]*)>>'
usb_dev = groupmatchstr1
wait prompt_sonic_root
sendln "sync"
wait prompt_sonic_root
sprintf2 cmd "mount %s /mnt/usb" usb_dev
sendln cmd
; ========== Copy Stress Log to USB ==========
wait prompt_sonic_root
sendln "cp ~/hammer/tools/amd/mlucas_amm_log /host/hw-eval/jobs/"
wait prompt_sonic_root
sendln "cp ./Blanton_Script/log/bmc_usb_net.log /host/hw-eval/jobs/"
wait prompt_sonic_root
sendln "cp ./Blanton_Script/log/bmc_poll.log /host/hw-eval/jobs/"
wait prompt_sonic_root
sendln "cp ./Blanton_Script/log/mgmt_ping.log /host/hw-eval/jobs/"
wait prompt_sonic_root
sendln "cp ./Blanton_Script/log/nfc_poll.log /host/hw-eval/jobs/"
if EN_TX_FIR = 1 then
wait prompt_sonic_root
sendln "cp ./Blanton_Script/log/blanton_dsc_ScriptA_u0.log /host/hw-eval/jobs/"
wait prompt_sonic_root
sendln "cp ./Blanton_Script/log/blanton_dsc_ScriptA_u1.log /host/hw-eval/jobs/"
wait prompt_sonic_root
sendln "cp ./Blanton_Script/log/blanton_dsc_ScriptC_u0.log /host/hw-eval/jobs/"
wait prompt_sonic_root
sendln "cp ./Blanton_Script/log/blanton_dsc_ScriptC_u1.log /host/hw-eval/jobs/"
endif
wait prompt_sonic_root
getdate ts_date "%Y%m%d"
gettime ts_time "%H%M"
sprintf2 usb_dst "/mnt/usb/jobs-%s_%s" ts_date ts_time
sprintf2 cmd "cp -r /host/hw-eval/jobs/ %s" usb_dst
sendln cmd
; ========== HW Test Session ==========
wait prompt_sonic_root
sendln "exit"
wait "Script done"
wait prompt_sonic_root
sendln "hw-test-session finish"
wait prompt_sonic_root
sendln "bgctl reset --yes"
messagebox 'GOOD JOB! Test Case DONE' 'teraterm'
src/Script_ABC_Blanton/4_Blanton_Script_thermal_safety.ttl
+164
View File
@@ -0,0 +1,164 @@
include "config.ttl"
flushrecv
;================================================================
; Log File Creation
;================================================================
gettime str_starttime "%Y%m%d-%H%M%S"
getdir mdir
if EN_log = 1 then
sprintf2 filename '%s\Logs\%s_%s_%s.log' mdir project_name strTestcase str_starttime
logopen filename 0 1 1 1
endif
; ========== Root Login ==========
wait prompt_login
sendln "admin"
wait "Password:"
sendln "YourPaSsWoRd"
wait prompt_sonic
sendln "sudo -i"
; ========== Pre Setting ==========
; Make log directory
wait prompt_sonic_root
sendln "mkdir ./logs"
; Setting System Time
getdate datestr
gettime timestr
sprintf2 cmd 'sudo date -s "%s %s"' datestr timestr
sendln cmd
;Stress log clear
wait prompt_sonic_root
sendln "rm /host/hw-eval/jobs/*"
; ========== HW Test Session ==========
; Clear session
wait prompt_sonic_root
sendln "hw-test-session finish"
wait prompt_sonic_root
sendln "bgctl reset --yes"
wait prompt_sonic_root
sendln "bgctl stop --all"
wait prompt_sonic_root
sendln "bgctl list"
wait prompt_sonic_root
sendln "hw-test-session start"
wait prompt_sonic_root
sendln "hw-test-session log"
wait prompt_sonic_root
sendln "hw-test-session status"
; ========== FAN SPEED ==========
wait prompt_sonic_root
sendln "echo 18-0020 > /sys/bus/i2c/drivers/max31790/unbind"
wait prompt_sonic_root
sendln "sleep .5"
wait prompt_sonic_root
sendln "echo 18-0020 > /sys/bus/i2c/drivers/max31790/bind"
wait prompt_sonic_root
sendln "echo 25-0020 > /sys/bus/i2c/drivers/max31790/unbind"
wait prompt_sonic_root
sendln "sleep .5"
wait prompt_sonic_root
sendln "echo 25-0020 > /sys/bus/i2c/drivers/max31790/bind"
wait prompt_sonic_root
sprintf2 fan_ctrl_cmd 'fan-speed-control.sh %d' FAN_SPEED
sendln fan_ctrl_cmd
wait "Set all configured fan channels to"
sendln "y"
; ========== Wait DUT Init ==========
include "utils/wait_init.ttl"
; ========== DUT Info ==========
wait prompt_sonic_root
sendln "show boot"
wait prompt_sonic_root
sendln "show version"
wait prompt_sonic_root
sendln "fwutil show status"
wait prompt_sonic_root
sendln "show system-memory"
wait prompt_sonic_root
sendln "show service"
wait prompt_sonic_root
sendln "show platform syseeprom"
wait prompt_sonic_root
sendln "show platform ssdhealth"
wait prompt_sonic_root
sendln "qfx5252-tpm-version"
wait prompt_sonic_root
sendln "/usr/sbin/nvme smart-log -H /dev/nvme0"
wait prompt_sonic_root
sendln "/usr/sbin/smartctl -x /dev/nvme0"
; ========== BMC version ==========
;wait prompt_sonic_root
;sendln "bmc-manager run 'cat /etc/issue'"
wait prompt_sonic_root
sendln "bmc-first-enroll"
wait prompt_sonic_root
sendln "bmc-manager version"
wait prompt_sonic_root
sendln "bmc-manager status"
; ========== CLEAR PCIE Error ==========
include "utils/show_pcie_error_reg_TH6_SWB0.ttl"
include "utils/show_pcie_error_reg_TH6_SWB1.ttl"
include "utils/show_pcie_error_reg_FPGA.ttl"
include "utils/show_pcie_error_reg_BMC.ttl"
include "utils/show_pcie_error_reg_DDR.ttl"
include "utils/show_pcie_error_reg_I210.ttl"
include "utils/show_pcie_error_reg_SSD.ttl"
wait prompt_sonic_root
sendln "/usr/sbin/ras-mc-ctl --summary"
; ========== Check PCIE tree + PCIE link status + GET PCIE bandwidth Test ==========
include "utils/pcie_bus.ttl"
; ========== TAKE DATA ==========
include "utils/setup_pmon.ttl"
include "utils/show_dmesg.ttl"
; ========== Full Load ==========
; AMD CPU STRESS TEST
; Clear the log file first
wait prompt_sonic_root
sendln "> ~/hammer/tools/amd/mlucas_amm_log"
wait prompt_sonic_root
sendln 'chmod +x ~/hammer/tools/amd/mlucas-avx2'
wait prompt_sonic_root
;sendln "~/hammer/tools/amd/mlucas-avx2 -s l -cpu 0:15 > ~/hammer/tools/amd/mlucas_amm_log 2>&1 &"
sendln "systemd-run --unit=mlucas-amm --property=Type=exec --property=Restart=always --property=RestartSec=2 /bin/bash -c '~/hammer/tools/amd/mlucas-avx2 -s l -cpu 0:15 >> ~/hammer/tools/amd/mlucas_amm_log 2>&1'"
; TR518 TEST
wait prompt_sonic_root
sendln "~/Blanton_Script/blanton_tr518.sh start"
while 1
; Base info polling
include "utils/setup_pmon.ttl"
; TH6 Power Polling
wait prompt_sonic_root
sendln "~/Blanton_Script/TH6_SWB0_power_readback.sh"
wait prompt_sonic_root
sendln "~/Blanton_Script/TH6_SWB1_power_readback.sh"
; Background jobs Check
wait prompt_sonic_root
sendln "bgctl list"
wait prompt_sonic_root
sendln "jobs"
wait prompt_sonic_root
sendln "systemctl is-active mlucas-amm"
pause 60
endwhile
src/Script_ABC_Blanton/5_Blanton_Script_Reboot_Cycle.ttl
+419
View File
@@ -0,0 +1,419 @@
include "config.ttl"
flushrecv
;================================================================
; Log File Creation
;================================================================
gettime str_starttime "%Y%m%d-%H%M%S"
getdir mdir
if EN_log = 1 then
sprintf2 filename '%s\Logs\%s_%s_%s.log' mdir project_name "Reboot_Cycle" str_starttime
logopen filename 0 1 1 1
endif
cnt_cycle = 0
while 1
cnt_cycle = cnt_cycle + 1
; ========== Root Login ==========
wait prompt_login
sendln "admin"
wait "Password:"
sendln "YourPaSsWoRd"
wait prompt_sonic
sendln "sudo -i"
wait prompt_sonic_root
sendln "sleep 10"
wait prompt_sonic_root
sprintf2 strTitle "echo -e '\033[1;32mReboot Cycle : %d \033[0m'" cnt_cycle
sendln strTitle
; ========== Pre Setting ==========
; Make log directory
wait prompt_sonic_root
sendln "mkdir ./logs"
; Setting System Time
getdate datestr
gettime timestr
sprintf2 cmd 'sudo date -s "%s %s"' datestr timestr
sendln cmd
; ========== FAN SPEED ==========
wait prompt_sonic_root
sendln "echo 18-0020 > /sys/bus/i2c/drivers/max31790/unbind"
wait prompt_sonic_root
sendln "sleep .5"
wait prompt_sonic_root
sendln "echo 18-0020 > /sys/bus/i2c/drivers/max31790/bind"
wait prompt_sonic_root
sendln "echo 25-0020 > /sys/bus/i2c/drivers/max31790/unbind"
wait prompt_sonic_root
sendln "sleep .5"
wait prompt_sonic_root
sendln "echo 25-0020 > /sys/bus/i2c/drivers/max31790/bind"
wait prompt_sonic_root
sprintf2 fan_ctrl_cmd 'fan-speed-control.sh %d' FAN_SPEED
sendln fan_ctrl_cmd
wait "Set all configured fan channels to"
sendln "y"
; ========== Wait DUT Init ==========
include "utils/wait_init.ttl"
; ========== DUT Info ==========
wait prompt_sonic_root
sprintf2 strCKPt1 "echo -e '\033[36mCheck Pt1 : DUT Info\033[0m'"
sendln strCKPt1
wait prompt_sonic_root
sendln "show boot"
wait prompt_sonic_root
sendln "show version"
wait prompt_sonic_root
sendln "fwutil show status"
wait prompt_sonic_root
sendln "show system-memory"
wait prompt_sonic_root
sendln "show service"
wait prompt_sonic_root
sendln "show platform syseeprom"
wait prompt_sonic_root
sendln "show platform ssdhealth"
wait prompt_sonic_root
sendln "qfx5252-tpm-version"
wait prompt_sonic_root
sendln "/usr/sbin/nvme smart-log -H /dev/nvme0"
wait prompt_sonic_root
sendln "/usr/sbin/smartctl -x /dev/nvme0"
; ========== BMC version ==========
wait prompt_sonic_root
sprintf2 strCKPt2 "echo -e '\033[36mCheck Pt2 : BMC Info\033[0m'"
sendln strCKPt2
wait prompt_sonic_root
sendln "bmc-first-enroll"
wait prompt_sonic_root
sendln "bmc-manager version"
wait prompt_sonic_root
sendln "bmc-manager status"
; ========== Load Shell Script ==========
wait prompt_sonic_root
sendln "source ~/Blanton_Script/blanton_fpga_pcimem.sh"
wait prompt_sonic_root
sendln "source ~/Blanton_Script/blanton_cb_i2c.sh"
wait prompt_sonic_root
sendln "source ~/Blanton_Script/blanton_icb_vi2c.sh"
wait prompt_sonic_root
sendln "source ~/Blanton_Script/blanton_pwr_data.sh"
wait prompt_sonic_root
sendln "source ~/Blanton_Script/blanton_traffic_linespeed.sh"
wait prompt_sonic_root
sendln "source ~/Blanton_Script/LTC2980_Margin_Script/margin.sh"
; ========== CLEAR PCIE Error ==========
include "utils/show_pcie_error_reg_TH6_SWB0.ttl"
include "utils/show_pcie_error_reg_TH6_SWB1.ttl"
include "utils/show_pcie_error_reg_FPGA.ttl"
include "utils/show_pcie_error_reg_BMC.ttl"
include "utils/show_pcie_error_reg_DDR.ttl"
include "utils/show_pcie_error_reg_I210.ttl"
include "utils/show_pcie_error_reg_SSD.ttl"
wait prompt_sonic_root
sendln "/usr/sbin/ras-mc-ctl --summary"
; ========== Check PCIE tree + PCIE link status + GET PCIE bandwidth Test ==========
include "utils/pcie_bus.ttl"
; ========== TAKE DATA ==========
include "utils/setup_pmon.ttl"
include "utils/show_dmesg.ttl"
; ========== 10G/1G MGMT Ping Test ==========
wait prompt_sonic_root
sprintf2 strCKPt3 "echo -e '\033[36mCheck Pt3 : Mgmt Ping Test\033[0m'"
sendln strCKPt3
wait prompt_sonic_root
sendln "./Blanton_Script/mgmt_ping_monitor.sh start"
wait prompt_sonic_root
pause 30
sendln "~/Blanton_Script/mgmt_ping_monitor.sh stop"
wait prompt_sonic_root
sendln "cat ~/Blanton_Script/log/mgmt_ping.log"
wait prompt_sonic_root
sendln "~/Blanton_Script/mgmt_ping_monitor.sh clear"
; ========== NFC Test ==========
wait prompt_sonic_root
sprintf2 strCKPt4 "echo -e '\033[36mCheck Pt4 : NFC Test\033[0m'"
sendln strCKPt4
wait prompt_sonic_root
sendln "~/Blanton_Script/nfc_polling.sh start"
wait prompt_sonic_root
sendln "~/Blanton_Script/nfc_polling.sh status"
wait prompt_sonic_root
sendln "sleep 20"
wait prompt_sonic_root
sendln "~/Blanton_Script/nfc_polling.sh stop"
wait prompt_sonic_root
sendln "~/Blanton_Script/nfc_polling.sh report"
; ========== SSD read/write ==========
wait prompt_sonic_root
sprintf2 strCKPt5 "echo -e '\033[36mCheck Pt5 : SSD Test\033[0m'"
sendln strCKPt5
wait prompt_sonic_root
sendln "qfx5252-stress-ssd 1G --runtime 30 --passes 2 --write --force --log /host/hw-eval/jobs/qfx5252-stress-ssd.log"
wait prompt_sonic_root
sendln "cat /host/hw-eval/jobs/qfx5252-stress-ssd.log"
; ========== USB read/write ==========
wait prompt_sonic_root
sprintf2 strCKPt6 "echo -e '\033[36mCheck Pt6 : USB Test\033[0m'"
sendln strCKPt6
; ---- Get USB partition node -> usb_dev ----
usb_dev = ''
wait prompt_sonic_root
sendln 'D=$(bash ~/Blanton_Script/usb_target.sh -o dev 2>/dev/null); echo "<<D""EV=${D:-NONE}>>"'
waitregex '<<DEV=([^>]*)>>'
usb_dev = groupmatchstr1
wait prompt_sonic_root
sprintf2 cmd "qfx5252-stress-usb %s 256M --runtime 30 --passes 2 --write --log /host/hw-eval/jobs/qfx5252-stress-usb.log" usb_dev
sendln cmd
wait prompt_sonic_root
sendln "cat /host/hw-eval/jobs/qfx5252-stress-usb.log"
; ========== BMC USB Test ==========
wait prompt_sonic_root
sprintf2 strCKPt7 "echo -e '\033[36mCheck Pt7 : BMC USB Test\033[0m'"
sendln strCKPt7
wait prompt_sonic_root
sendln 'echo "NCMIF=$(ls -d /sys/bus/usb/drivers/cdc_ncm/*/net/* 2>/dev/null | head -n 1 | xargs -r basename)"'
; timeout is GLOBAL and sticky: left at 15, every 'wait' below gives up after
; 15 s instead of blocking, the macro runs ahead of the DUT and the whole
; cycle desynchronises. Restore it BEFORE the branch so both paths are
; covered - the ping block below waits on 'sleep 10', which is already two
; thirds of the 15 s cap on a loaded DUT.
timeout = 15
waitregex 'NCMIF=[A-Za-z0-9_-]+'
ncm_found = result ; hold it: 'result' is reused below
timeout = 0 ; restore, both paths
if ncm_found = 0 then
messagebox 'cdc_ncm interface not found. Ping test skipped.' 'ERROR'
goto skip_ping
endif
strlen matchstr
cut_len = result - 6 ; 'NCMIF=' = 6 chars
strcopy matchstr 7 cut_len ncm_if ; -> ncm_if = "eth2" / "eth3"
sprintf2 cmd 'ip -br link show %s' ncm_if
wait prompt_sonic_root
sendln cmd
wait prompt_sonic_root
sendln 'systemctl stop qfx5252-bmc-usb-net-test.service 2>/dev/null || true'
wait prompt_sonic_root
sendln 'systemctl reset-failed qfx5252-bmc-usb-net-test.service 2>/dev/null || true'
sprintf2 cmd 'systemd-run --unit=qfx5252-bmc-usb-net-test --property=Type=exec /usr/bin/ping -I %s -i 1 -W 2 -w 14400 192.168.200.200' ncm_if
wait prompt_sonic_root
sendln cmd
wait prompt_sonic_root
sendln "sleep 10"
wait prompt_sonic_root
sendln "systemctl stop qfx5252-bmc-usb-net-test.service"
wait prompt_sonic_root
sendln "journalctl -u qfx5252-bmc-usb-net-test.service --no-pager"
:skip_ping
timeout = 0 ; backstop, same as Script B
; ========== 100G Port Setting ==========
wait prompt_sonic_root
sendln "sudo sfputil lpmode off Ethernet513"
wait prompt_sonic_root
sendln "sudo sfputil lpmode off Ethernet514"
wait prompt_sonic_root
sendln "config interface -n asic0 startup Ethernet513"
wait prompt_sonic_root
sendln "config interface -n asic1 startup Ethernet514"
wait prompt_sonic_root
sendln "config save -y"
; ========== First Traffic Test ==========
; Silent MAC
wait prompt_sonic_root
sendln "config feature state lldp disabled"
wait prompt_sonic_root
sendln "config save -y"
; ========== 100G Port Status ==========
wait prompt_sonic_root
sprintf2 strCKPt8 "echo -e '\033[36mCheck Pt8 : Port Status and 15sec Traffic \033[0m'"
sendln strCKPt8
wait prompt_sonic_root
sendln "show interfaces status Ethernet513,Ethernet514"
; ========== Traffic Test ==========
if SWB_UNIT0 = 1 && SWB_UNIT1 = 1 then
wait prompt_sonic_root
sendln "blanton_traffic_linespeed ps"
wait prompt_sonic_root
sendln "blanton_traffic_linespeed init"
wait prompt_sonic_root
sendln "blanton_traffic_linespeed clear"
wait prompt_sonic_root
sendln "blanton_traffic_linespeed show"
wait prompt_sonic_root
sendln "blanton_traffic_linespeed start"
wait prompt_sonic_root
pause 15
sendln "blanton_traffic_linespeed stop"
wait prompt_sonic_root
sendln "blanton_traffic_linespeed report"
elseif SWB_UNIT0 = 1 && SWB_UNIT1 = 0 then
wait prompt_sonic_root
sendln "blanton_traffic_linespeed ps -u 0"
wait prompt_sonic_root
sendln "blanton_traffic_linespeed init -u 0"
wait prompt_sonic_root
sendln "blanton_traffic_linespeed clear -u 0"
wait prompt_sonic_root
sendln "blanton_traffic_linespeed show -u 0"
wait prompt_sonic_root
sendln "blanton_traffic_linespeed start -u 0"
wait prompt_sonic_root
pause 15
sendln "blanton_traffic_linespeed stop -u 0"
wait prompt_sonic_root
sendln "blanton_traffic_linespeed report -u 0"
elseif SWB_UNIT0 = 0 && SWB_UNIT1 = 1 then
wait prompt_sonic_root
sendln "blanton_traffic_linespeed ps -u 1"
wait prompt_sonic_root
sendln "blanton_traffic_linespeed init -u 1"
wait prompt_sonic_root
sendln "blanton_traffic_linespeed clear -u 1"
wait prompt_sonic_root
sendln "blanton_traffic_linespeed show -u 1"
wait prompt_sonic_root
sendln "blanton_traffic_linespeed start -u 1"
wait prompt_sonic_root
pause 15
sendln "blanton_traffic_linespeed stop -u 1"
wait prompt_sonic_root
sendln "blanton_traffic_linespeed report -u 1"
else
endif
; ========== BER ==========
; PRBS takes the SerDes out of normal operation, so this runs AFTER the
; traffic report. sleep 30 matches blanton_ber.sh BER_INTERVAL - reporting
; earlier reads an interval that has not finished accumulating.
wait prompt_sonic_root
sprintf2 strCKPt8 "echo -e '\033[36mCheck Pt9 : BER Test \033[0m'"
sendln strCKPt8
if SWB_UNIT0 = 1 && SWB_UNIT1 = 1 then
wait prompt_sonic_root
sendln "./Blanton_Script/blanton_ber.sh init"
wait prompt_sonic_root
sendln "./Blanton_Script/blanton_ber.sh start"
wait prompt_sonic_root
sendln "sleep 30"
wait prompt_sonic_root
sendln "./Blanton_Script/blanton_ber.sh report"
wait prompt_sonic_root
sendln "./Blanton_Script/blanton_ber.sh stop"
wait prompt_sonic_root
sendln "./Blanton_Script/blanton_ber.sh clear"
elseif SWB_UNIT0 = 1 && SWB_UNIT1 = 0 then
wait prompt_sonic_root
sendln "./Blanton_Script/blanton_ber.sh init -u 0"
wait prompt_sonic_root
sendln "./Blanton_Script/blanton_ber.sh start -u 0"
wait prompt_sonic_root
sendln "sleep 30"
wait prompt_sonic_root
sendln "./Blanton_Script/blanton_ber.sh report -u 0"
wait prompt_sonic_root
sendln "./Blanton_Script/blanton_ber.sh stop -u 0"
wait prompt_sonic_root
sendln "./Blanton_Script/blanton_ber.sh clear -u 0"
elseif SWB_UNIT0 = 0 && SWB_UNIT1 = 1 then
wait prompt_sonic_root
sendln "./Blanton_Script/blanton_ber.sh init -u 1"
wait prompt_sonic_root
sendln "./Blanton_Script/blanton_ber.sh start -u 1"
wait prompt_sonic_root
sendln "sleep 30"
wait prompt_sonic_root
sendln "./Blanton_Script/blanton_ber.sh report -u 1"
wait prompt_sonic_root
sendln "./Blanton_Script/blanton_ber.sh stop -u 1"
wait prompt_sonic_root
sendln "./Blanton_Script/blanton_ber.sh clear -u 1"
else
endif
; ========== NVME Err Info ==========
wait prompt_sonic_root
sprintf2 strCKPt9 "echo -e '\033[36mCheck Pt10 : NVME Err Info \033[0m'"
sendln strCKPt9
wait prompt_sonic_root
sendln "/usr/sbin/nvme smart-log -H /dev/nvme0"
wait prompt_sonic_root
sendln "/usr/sbin/smartctl -x /dev/nvme0"
; ========== TAKE DATA ==========
wait prompt_sonic_root
sprintf2 strCKPt10 "echo -e '\033[36mCheck Pt11 : Platform Data \033[0m'"
sendln strCKPt10
include "utils/setup_pmon.ttl"
wait prompt_sonic_root
sprintf2 strCKPt12 "echo -e '\033[36mCheck Pt12 : Dmesg_i2c \033[0m'"
sendln strCKPt12
include "utils/show_dmesg.ttl"
; ========== Check PCIE error counters ==========
wait prompt_sonic_root
sprintf2 strCKPt13 "echo -e '\033[36mCheck Pt13 : PCIE Error Counters \033[0m'"
sendln strCKPt13
include "utils/show_pcie_error_reg_TH6_SWB0.ttl"
include "utils/show_pcie_error_reg_TH6_SWB1.ttl"
include "utils/show_pcie_error_reg_FPGA.ttl"
include "utils/show_pcie_error_reg_BMC.ttl"
include "utils/show_pcie_error_reg_DDR.ttl"
include "utils/show_pcie_error_reg_I210.ttl"
include "utils/show_pcie_error_reg_SSD.ttl"
wait prompt_sonic_root
sendln "/usr/sbin/ras-mc-ctl --summary"
; ========== Show Power on uptime ==========
wait prompt_sonic_root
sendln "show uptime"
; ========== Show Power on uptime ==========
wait prompt_sonic_root
sendln "reboot"
wait "Booting in blind mode"
endwhile
src/Script_ABC_Blanton/Blanton_Script/LTC2980_Margin_Script/README.md
+105 -10
View File
@@ -14,6 +14,8 @@
| `margin_operation <ch> <op>` | 只切 OPERATION register |
| `margin_apply_profile <file>` | 批次套用 profile（套用在當前載入的 LTC2980） |
| `margin_save` | 寫入 NVM（當前 LTC2980 的兩個 LTC2977 都寫） |
| `margin_save all` | 對 `settings/` 底下**全部** LTC2980 寫入 NVM，結束後回到原本載入的那顆 |
| `margin_save blanton` | **Blanton SONiC 專用**：18 顆 LTC2977 全部走原生 i2c bus 寫入，不需要 `margin_init` |
| `margin_debug [on\|off]` | 開關 debug 模式（不帶參數則 toggle） |
| `margin_log [on\|off]` | 開關 log 記錄（不帶參數則 toggle，預設開啟） |
@@ -70,16 +72,18 @@ margin_operation 0 high
margin_operation 0 nominal
# 批次套用 profile（套在當前載入的 LTC2980）
margin_apply_profile profiles/comboA.conf
margin_apply_profile profiles/comboB.conf
margin_apply_profile profiles/combo_SWB_CONN13_high.conf
margin_apply_profile profiles/combo_SWB_CONN13_low.conf
margin_apply_profile profiles/all_off.conf
# 切換到另一顆 LTC2980
margin_init Blanton_SWB1_CONN16
margin_apply_profile profiles/comboA.conf
margin_apply_profile profiles/combo_SWB_CONN16_high.conf
# 儲存到 NVM（斷電後保留）
margin_save
margin_save # 只寫當前載入的那顆
margin_save all # settings/ 底下 9 顆全部寫，最後自動切回原本那顆
margin_save blanton # Blanton SONiC 專用捷徑，18 顆一次寫完（見下）
```
## 一次掃所有 LTC2980
@@ -104,7 +108,7 @@ BOARDS=(
## 一次套 profile 到所有 LTC2980
`script/margin_apply_profile_all.sh` 對多顆 LTC2980 依 `BOARDS[i]` 配對
`PROFILES[i]` 套用 profile（預設全部 `comboA`）。
`PROFILES[i]` 套用 profile（預設 SWB 各用自己 CONN 的 `_high`，CB 用 `combo_high3`）。
```bash
source script/margin_apply_profile_all.sh
@@ -120,8 +124,8 @@ BOARDS=(
)
PROFILES=(
"comboA" # Blanton_CB_CONN13
"comboB" # Blanton_SWB0_CONN13 ← 改成 comboB
"combo_high3" # Blanton_CB_CONN13
"combo_SWB_CONN13_high" # Blanton_SWB0_CONN13
...
)
```
@@ -129,18 +133,109 @@ PROFILES=(
`PROFILES` 寫名字即可（不含路徑跟 `.conf`），script 會自動展開成
`profiles/<name>.conf`。兩個陣列長度不一致會直接報錯。
## 一次把所有 LTC2980 寫入 NVM
> ⚠️ **SWB 的 profile 是 per-CONN 的**：每個檔的百分比對應該片板子的軌，
> 套到別的 CONN 會 margin 到錯的東西（而且不會報錯）。這裡不能全部填同一個名字。
> HIGH / LOW 兩輪就是把 `_high` 全換成 `_low` 再跑一次。
`script/margin_save_all.sh` 對 `BOARDS` 列出的每顆 LTC2980 跑 `margin_save`。
## 一次把所有 LTC2980 寫入 NVM
> ⚠️ `margin_save` 會把當前 margin / OV / UV 設定**永久寫入 NVM**，
> 斷電後保留。執行前先用 `margin_status_all.sh` 確認狀態正確。
**全部 9 顆**直接用內建的：
```bash
margin_save all
```
依 `settings/*.conf` 的檔名順序跑，中途某顆失敗**不會停**（半套完成的狀態比全部試完更難查），
最後印出「幾顆成功 / 哪幾顆失敗」的總結，並把 `margin_init` 切回你呼叫前載入的那顆。
**只寫其中幾顆**才需要 `script/margin_save_all.sh`，編 script 頂端的 `BOARDS` 陣列：
```bash
source script/margin_save_all.sh
```
要改寫哪幾顆，編 script 頂端的 `BOARDS` 陣列即可（同前述）。
### 送出去的是什麼
`margin_save` 對每顆 LTC2977 送一次 `STORE_USER_ALL`（PMBus command `0x15`），
**不分 page**（這是整顆晶片的命令），也**不帶 data byte** —— 它是 SMBus send-byte：
```bash
i2cset -y 4 0x5C 0x15 c # CB CONN13（原生 bus 4）
cb_pmbus_write 8 0x5C 0x15 # SWB0 CONN13（CB FPGA F3 Ch8）
```
> v2.7.0 之前送的是 `0x15 0x00`（write-byte）。LTC2977 在 CB 上吃得下去，但那是零件寬容，
> 不是規範。同時 v2.7.0 起會檢查回傳值 —— 以前 NACK 了還是印 `Change Saved`。
每顆之間會 `sleep $MARGIN_STORE_SETTLE`（預設 0.5 秒）。這不是量測值，是保守的保護：
NVM 寫入需要時間，而這支工具**沒有**去 poll 零件的 busy bit。`margin_save all` 連續送 18 次，
這個間隔就是唯一的緩衝。要關掉設成空字串即可。
## `margin_save blanton` — Blanton SONiC 專用
Blanton 這台把 CB FPGA F3 的 I2C 通道**同時掛成了原生 Linux i2c adapter**，
所以 SWB 上的 LTC2977 不必走 `cb_pmbus_*` / pcimem，用 `i2cset` 直接打得到：
| FPGA F3 通道 | Linux bus | 板 / 接頭 |
|---|---|---|
| Ch6 | 13 | SWB0 CONN14 / CONN16 |
| Ch8 | 15 | SWB0 CONN13 / CONN15 |
| Ch7 | 14 | SWB1 CONN14 / CONN16 |
| Ch9 | 16 | SWB1 CONN13 / CONN15 |
| —（原生） | 4 | CB CONN13 |
因此 `margin_save blanton` 就是一張平表跑完 18 顆，**不需要 `margin_init`**、
不做 FPGA 通道初始化、不做 probe，也不會動到你當前載入的那顆板子：
```bash
margin_save blanton
```
```
CB CONN13 bus 4 0x5C : saved
SWB0 CONN13 bus 15 0x5C : saved
...
margin_save blanton: 18 saved, 0 failed
```
送出去的就是這 18 行（2026-08-27 上機驗證）：
```bash
i2cset -f -y 4 0x5C 0x15 ; i2cset -f -y 4 0x5E 0x15 # CB CONN13
i2cset -f -y 15 0x5C 0x15 ; i2cset -f -y 15 0x5E 0x15 # SWB0 CONN13
i2cset -f -y 13 0x5C 0x15 ; i2cset -f -y 13 0x5E 0x15 # SWB0 CONN14
i2cset -f -y 15 0x62 0x15 ; i2cset -f -y 15 0x64 0x15 # SWB0 CONN15
i2cset -f -y 13 0x62 0x15 ; i2cset -f -y 13 0x64 0x15 # SWB0 CONN16
i2cset -f -y 16 0x5C 0x15 ; i2cset -f -y 16 0x5E 0x15 # SWB1 CONN13
i2cset -f -y 14 0x5C 0x15 ; i2cset -f -y 14 0x5E 0x15 # SWB1 CONN14
i2cset -f -y 16 0x62 0x15 ; i2cset -f -y 16 0x64 0x15 # SWB1 CONN15
i2cset -f -y 14 0x62 0x15 ; i2cset -f -y 14 0x64 0x15 # SWB1 CONN16
```
`-f` 是因為這些 bus 上的 LTC2977 可能已被 kernel driver 認走；上機驗證過的指令帶 `-f`，就照原樣保留。
**這台沒裝滿的話**，把 `margin.sh` 頂端 `MARGIN_BLANTON_STORE` 陣列裡對應的行註解掉即可，
不要讓它去打不存在的板子。bus 節點不存在（`/dev/i2c-N` 沒有）與晶片不回應（NACK）
會分別報不同訊息 —— 前者代表 FPGA 的 i2c adapter 根本沒 enumerate，後者才是板子的問題。
## Profile 一覽
| Profile | 適用 | 說明 |
|---|---|---|
| `combo_SWB_CONN13_high` / `_low` | **SWB CONN13 專用** | 每個 channel 依該板的軌給 3% 或 5% |
| `combo_SWB_CONN14_high` / `_low` | **SWB CONN14 專用** | 同上 |
| `combo_SWB_CONN15_high` / `_low` | **SWB CONN15 專用** | 同上 |
| `combo_SWB_CONN16_high` / `_low` | **SWB CONN16 專用** | 同上 |
| `combo_high3` / `combo_low3` | 通用 | 全部 channel ±3% |
| `combo_high5` / `combo_low5` | 通用 | 全部 channel ±5% |
| `combo_normal` | 通用 | 全部回 nominal |
| `all_off` | 通用 | 全部 OPERATION off |
SWB0 和 SWB1 的同號 CONN 共用同一個 profile（兩片板的軌完全相同，
只差 I2C bus）。CB CONN13 沒有專屬 profile，用通用的 `combo_high3` / `combo_low3`。
## Operation 對應
src/Script_ABC_Blanton/Blanton_Script/LTC2980_Margin_Script/Ref/margin_command_trace.md
+25 -2
View File
@@ -1,5 +1,27 @@
# margin.sh 實際下線指令追蹤 (Command Trace)
> ## ⚠️ 過期警告(2026-08-19)
>
> **本文件第 5~7 章的 SWB 指令追蹤已與現況不符,請勿照抄。**
> 上機驗證後 SWB 的 channel 配對與 LTC2977 位址都改了(commit `ababb2c`),
> 但本文件的 1223 條 `cb_pmbus_*` 指令是當時依舊值展開的,其中 487 條用到
> 已不存在的位址(`0x5D` / `0x5F` / `0x63` / `0x65`)。
>
> **正解以 `settings/*.conf` 為準:**
>
> | Channel | 板/接頭 | LTC2977 位址 |
> |---|---|---|
> | Ch6 | SWB0 CONN14 / CONN16 | CONN14 `0x5C`,`0x5E` ; CONN16 `0x62`,`0x64` |
> | Ch8 | SWB0 CONN13 / CONN15 | CONN13 `0x5C`,`0x5E` ; CONN15 `0x62`,`0x64` |
> | Ch7 | SWB1 CONN14 / CONN16 | CONN14 `0x5C`,`0x5E` ; CONN16 `0x62`,`0x64` |
> | Ch9 | SWB1 CONN13 / CONN15 | CONN13 `0x5C`,`0x5E` ; CONN15 `0x62`,`0x64` |
>
> 位址在同一顆 LTC2980 內是 **+2** 遞增(7-bit,由規格書 8-bit 配對除以 2 而來),
> 不是舊文件寫的 +1。原先記錄的 Ch6 上 `0x5E` 相撞問題已隨這次修正消失。
>
> 第 1~4 章(CB / i2c 路徑、暫存器語意、LINEAR16 換算)不受影響,仍然有效。
> 需要正確的 SWB 指令追蹤請重新產生本文件。
對象:`LTC2980_Margin_Script/margin.sh` v2.6.0
產生日期:2026-08-18
用途:紀錄每個 margin 指令在 I2C / PMBus 線上真正下了什麼,方便對照 log、
@@ -402,8 +424,9 @@ SWB debug 指令(margin.sh v2.6.0 新增,皆為 `blanton_cb_i2c.sh` 的薄包裝
`Blanton_SWB0_CONN14.conf` 的第一顆也是 `0:0x5E`。兩個 CONN 現在同在 Ch6,
位址相撞。對照 SWB1 的規律(CONN13=`0x5C/0x5D`、CONN14=`0x5E/0x5F`),
SWB0_CONN13 第二顆推測應為 `0:0x5D` — **尚未修改,待硬體確認**。
- `margin_save` 走 `0x15` + data byte(`i2cset ... 0x15 0x00 b`)。PMBus 規範
STORE_USER_ALL 是 send-byte;CB 上實測可用故保留原樣,swb 路徑沿用同一寫法。
- `margin_save` 走 `0x15` **send-byte**(`i2cset ... 0x15 c` / `cb_pmbus_write <ch> <addr> 0x15`),
不帶 data byte。v2.7.0 之前送的是 `0x15 0x00`(write-byte),CB 上實測可用,
但那是零件寬容而非規範。
---
src/Script_ABC_Blanton/Blanton_Script/LTC2980_Margin_Script/margin.sh
+990 -754
View File
File diff suppressed because it is too large Load Diff
src/Script_ABC_Blanton/Blanton_Script/LTC2980_Margin_Script/profiles/comboA.conf
-22
View File
@@ -1,22 +0,0 @@
# Profile: comboA - alternating high/low (even=high, odd=low)
# Applied to whichever LTC2980 is currently loaded via margin_init
# Format: "channel:operation:change_percent"
PROFILE_CHANNELS=(
"0:high:8"
"1:low:8"
"2:high:8"
"3:low:8"
"4:high:8"
"5:low:8"
"6:high:8"
"7:low:8"
"8:high:8"
"9:low:8"
"10:high:8"
"11:low:8"
"12:high:8"
"13:low:8"
"14:high:8"
"15:low:8"
)
src/Script_ABC_Blanton/Blanton_Script/LTC2980_Margin_Script/profiles/comboA_CB.conf
+26
View File
@@ -0,0 +1,26 @@
# Profile: comboA_CB - checkerboard, the complement of comboB_CB
# Board: CB only. The channel list is positional, so applying this to a
# different board margins the wrong rails and nothing detects it.
# Run comboA then comboB to cover every rail in both directions while its
# neighbours sit the other way.
# Applied to whichever LTC2980 is currently loaded via margin_init
# Format: "channel:operation:change_percent"
PROFILE_CHANNELS=(
"0:low:5"
"1:low:5"
"2:high:5"
"3:low:5"
"4:high:5"
"5:high:5"
"6:high:5"
"7:high:5"
"8:low:5"
"9:high:5"
"10:high:5"
"11:high:5"
"12:low:5"
"13:high:5"
"14:high:5"
"15:low:5"
)
src/Script_ABC_Blanton/Blanton_Script/LTC2980_Margin_Script/profiles/comboA_SWB_CONN13.conf
+26
View File
@@ -0,0 +1,26 @@
# Profile: comboA_SWB_CONN13 - checkerboard, the complement of comboB_SWB_CONN13
# Board: SWB_CONN13 only. The channel list is positional, so applying this to a
# different board margins the wrong rails and nothing detects it.
# Run comboA then comboB to cover every rail in both directions while its
# neighbours sit the other way.
# Applied to whichever LTC2980 is currently loaded via margin_init
# Format: "channel:operation:change_percent"
PROFILE_CHANNELS=(
"0:high:3"
"1:high:3"
"2:low:3"
"3:low:3"
"4:high:5"
"5:low:5"
"6:high:5"
"7:high:5"
"8:high:5"
"9:high:3"
"10:high:3"
"11:low:3"
"12:low:3"
"13:high:3"
"14:high:3"
"15:low:5"
)
src/Script_ABC_Blanton/Blanton_Script/LTC2980_Margin_Script/profiles/comboA_SWB_CONN14.conf
+28
View File
@@ -0,0 +1,28 @@
# Profile: comboA_SWB_CONN14 - checkerboard, the complement of comboB_SWB_CONN14
# Board: SWB_CONN14 only. The channel list is positional, so applying this to a
# different board margins the wrong rails and nothing detects it.
# Run comboA then comboB to cover every rail in both directions while its
# neighbours sit the other way.
# CH 10, 11, 13 stay nominal: they are NC on this board, so there is
# nothing to margin.
# Applied to whichever LTC2980 is currently loaded via margin_init
# Format: "channel:operation:change_percent"
PROFILE_CHANNELS=(
"0:high:3"
"1:low:3"
"2:low:3"
"3:high:5"
"4:high:5"
"5:high:5"
"6:low:5"
"7:low:5"
"8:low:3"
"9:low:3"
"10:nominal:5"
"11:nominal:5"
"12:high:3"
"13:nominal:5"
"14:high:5"
"15:high:3"
)
src/Script_ABC_Blanton/Blanton_Script/LTC2980_Margin_Script/profiles/comboA_SWB_CONN15.conf
+28
View File
@@ -0,0 +1,28 @@
# Profile: comboA_SWB_CONN15 - checkerboard, the complement of comboB_SWB_CONN15
# Board: SWB_CONN15 only. The channel list is positional, so applying this to a
# different board margins the wrong rails and nothing detects it.
# Run comboA then comboB to cover every rail in both directions while its
# neighbours sit the other way.
# CH 10 stay nominal: they are NC on this board, so there is
# nothing to margin.
# Applied to whichever LTC2980 is currently loaded via margin_init
# Format: "channel:operation:change_percent"
PROFILE_CHANNELS=(
"0:low:3"
"1:low:3"
"2:high:3"
"3:high:3"
"4:low:3"
"5:low:3"
"6:high:5"
"7:high:3"
"8:high:5"
"9:low:5"
"10:nominal:5"
"11:low:5"
"12:low:3"
"13:high:3"
"14:high:3"
"15:high:5"
)
src/Script_ABC_Blanton/Blanton_Script/LTC2980_Margin_Script/profiles/comboA_SWB_CONN16.conf
+26
View File
@@ -0,0 +1,26 @@
# Profile: comboA_SWB_CONN16 - checkerboard, the complement of comboB_SWB_CONN16
# Board: SWB_CONN16 only. The channel list is positional, so applying this to a
# different board margins the wrong rails and nothing detects it.
# Run comboA then comboB to cover every rail in both directions while its
# neighbours sit the other way.
# Applied to whichever LTC2980 is currently loaded via margin_init
# Format: "channel:operation:change_percent"
PROFILE_CHANNELS=(
"0:high:3"
"1:high:5"
"2:high:5"
"3:low:5"
"4:high:5"
"5:low:5"
"6:high:5"
"7:high:3"
"8:high:3"
"9:high:3"
"10:low:3"
"11:low:3"
"12:low:3"
"13:low:3"
"14:low:3"
"15:high:3"
)
src/Script_ABC_Blanton/Blanton_Script/LTC2980_Margin_Script/profiles/comboB.conf
-22
View File
@@ -1,22 +0,0 @@
# Profile: comboB - inverse of comboA (even=low, odd=high)
# Applied to whichever LTC2980 is currently loaded via margin_init
# Format: "channel:operation:change_percent"
PROFILE_CHANNELS=(
"0:low:8"
"1:high:8"
"2:low:8"
"3:high:8"
"4:low:8"
"5:high:8"
"6:low:8"
"7:high:8"
"8:low:8"
"9:high:8"
"10:low:8"
"11:high:8"
"12:low:8"
"13:high:8"
"14:low:8"
"15:high:8"
)
src/Script_ABC_Blanton/Blanton_Script/LTC2980_Margin_Script/profiles/comboB_CB.conf
+26
View File
@@ -0,0 +1,26 @@
# Profile: comboB_CB - checkerboard, the complement of comboA_CB
# Board: CB only. The channel list is positional, so applying this to a
# different board margins the wrong rails and nothing detects it.
# Run comboB then comboA to cover every rail in both directions while its
# neighbours sit the other way.
# Applied to whichever LTC2980 is currently loaded via margin_init
# Format: "channel:operation:change_percent"
PROFILE_CHANNELS=(
"0:high:5"
"1:high:5"
"2:low:5"
"3:high:5"
"4:low:5"
"5:low:5"
"6:low:5"
"7:low:5"
"8:high:5"
"9:low:5"
"10:low:5"
"11:low:5"
"12:high:5"
"13:low:5"
"14:low:5"
"15:high:5"
)
src/Script_ABC_Blanton/Blanton_Script/LTC2980_Margin_Script/profiles/comboB_SWB_CONN13.conf
+26
View File
@@ -0,0 +1,26 @@
# Profile: comboB_SWB_CONN13 - checkerboard, the complement of comboA_SWB_CONN13
# Board: SWB_CONN13 only. The channel list is positional, so applying this to a
# different board margins the wrong rails and nothing detects it.
# Run comboB then comboA to cover every rail in both directions while its
# neighbours sit the other way.
# Applied to whichever LTC2980 is currently loaded via margin_init
# Format: "channel:operation:change_percent"
PROFILE_CHANNELS=(
"0:low:3"
"1:low:3"
"2:high:3"
"3:high:3"
"4:low:5"
"5:high:5"
"6:low:5"
"7:low:5"
"8:low:5"
"9:low:3"
"10:low:3"
"11:high:3"
"12:high:3"
"13:low:3"
"14:low:3"
"15:high:5"
)
src/Script_ABC_Blanton/Blanton_Script/LTC2980_Margin_Script/profiles/comboB_SWB_CONN14.conf
+28
View File
@@ -0,0 +1,28 @@
# Profile: comboB_SWB_CONN14 - checkerboard, the complement of comboA_SWB_CONN14
# Board: SWB_CONN14 only. The channel list is positional, so applying this to a
# different board margins the wrong rails and nothing detects it.
# Run comboB then comboA to cover every rail in both directions while its
# neighbours sit the other way.
# CH 10, 11, 13 stay nominal: they are NC on this board, so there is
# nothing to margin.
# Applied to whichever LTC2980 is currently loaded via margin_init
# Format: "channel:operation:change_percent"
PROFILE_CHANNELS=(
"0:low:3"
"1:high:3"
"2:high:3"
"3:low:5"
"4:low:5"
"5:low:5"
"6:high:5"
"7:high:5"
"8:high:3"
"9:high:3"
"10:nominal:5"
"11:nominal:5"
"12:low:3"
"13:nominal:5"
"14:low:5"
"15:low:3"
)
src/Script_ABC_Blanton/Blanton_Script/LTC2980_Margin_Script/profiles/comboB_SWB_CONN15.conf
+28
View File
@@ -0,0 +1,28 @@
# Profile: comboB_SWB_CONN15 - checkerboard, the complement of comboA_SWB_CONN15
# Board: SWB_CONN15 only. The channel list is positional, so applying this to a
# different board margins the wrong rails and nothing detects it.
# Run comboB then comboA to cover every rail in both directions while its
# neighbours sit the other way.
# CH 10 stay nominal: they are NC on this board, so there is
# nothing to margin.
# Applied to whichever LTC2980 is currently loaded via margin_init
# Format: "channel:operation:change_percent"
PROFILE_CHANNELS=(
"0:high:3"
"1:high:3"
"2:low:3"
"3:low:3"
"4:high:3"
"5:high:3"
"6:low:5"
"7:low:3"
"8:low:5"
"9:high:5"
"10:nominal:5"
"11:high:5"
"12:high:3"
"13:low:3"
"14:low:3"
"15:low:5"
)
src/Script_ABC_Blanton/Blanton_Script/LTC2980_Margin_Script/profiles/comboB_SWB_CONN16.conf
+26
View File
@@ -0,0 +1,26 @@
# Profile: comboB_SWB_CONN16 - checkerboard, the complement of comboA_SWB_CONN16
# Board: SWB_CONN16 only. The channel list is positional, so applying this to a
# different board margins the wrong rails and nothing detects it.
# Run comboB then comboA to cover every rail in both directions while its
# neighbours sit the other way.
# Applied to whichever LTC2980 is currently loaded via margin_init
# Format: "channel:operation:change_percent"
PROFILE_CHANNELS=(
"0:low:3"
"1:low:5"
"2:low:5"
"3:high:5"
"4:low:5"
"5:high:5"
"6:low:5"
"7:low:3"
"8:low:3"
"9:low:3"
"10:high:3"
"11:high:3"
"12:high:3"
"13:high:3"
"14:high:3"
"15:low:3"
)
src/Script_ABC_Blanton/Blanton_Script/LTC2980_Margin_Script/profiles/combo_SWB_CONN13_high.conf
+24
View File
@@ -0,0 +1,24 @@
# Profile: combo_SWB_CONN13_high - every channel margin HIGH, per-channel percentage
# For the SWB CONN13 board only: the percentages follow that board's
# rails, so applying it to a different CONN margins the wrong things.
# Applied to whichever LTC2980 is currently loaded via margin_init
# Format: "channel:operation:change_percent"
PROFILE_CHANNELS=(
"0:high:3"
"1:high:3"
"2:high:3"
"3:high:3"
"4:high:5"
"5:high:5"
"6:high:5"
"7:high:5"
"8:high:5"
"9:high:3"
"10:high:3"
"11:high:3"
"12:high:3"
"13:high:3"
"14:high:3"
"15:high:5"
)
src/Script_ABC_Blanton/Blanton_Script/LTC2980_Margin_Script/profiles/combo_SWB_CONN13_low.conf
+24
View File
@@ -0,0 +1,24 @@
# Profile: combo_SWB_CONN13_low - every channel margin LOW, per-channel percentage
# For the SWB CONN13 board only: the percentages follow that board's
# rails, so applying it to a different CONN margins the wrong things.
# Applied to whichever LTC2980 is currently loaded via margin_init
# Format: "channel:operation:change_percent"
PROFILE_CHANNELS=(
"0:low:3"
"1:low:3"
"2:low:3"
"3:low:3"
"4:low:5"
"5:low:5"
"6:low:5"
"7:low:5"
"8:low:5"
"9:low:3"
"10:low:3"
"11:low:3"
"12:low:3"
"13:low:3"
"14:low:3"
"15:low:5"
)
src/Script_ABC_Blanton/Blanton_Script/LTC2980_Margin_Script/profiles/combo_SWB_CONN14_high.conf
+24
View File
@@ -0,0 +1,24 @@
# Profile: combo_SWB_CONN14_high - every channel margin HIGH, per-channel percentage
# For the SWB CONN14 board only: the percentages follow that board's
# rails, so applying it to a different CONN margins the wrong things.
# Applied to whichever LTC2980 is currently loaded via margin_init
# Format: "channel:operation:change_percent"
PROFILE_CHANNELS=(
"0:high:3"
"1:high:3"
"2:high:3"
"3:high:5"
"4:high:5"
"5:high:5"
"6:high:5"
"7:high:5"
"8:high:3"
"9:high:3"
"10:nominal:5"
"11:nominal:5"
"12:high:3"
"13:nominal:5"
"14:high:5"
"15:high:3"
)
src/Script_ABC_Blanton/Blanton_Script/LTC2980_Margin_Script/profiles/combo_SWB_CONN14_low.conf
+24
View File
@@ -0,0 +1,24 @@
# Profile: combo_SWB_CONN14_low - every channel margin LOW, per-channel percentage
# For the SWB CONN14 board only: the percentages follow that board's
# rails, so applying it to a different CONN margins the wrong things.
# Applied to whichever LTC2980 is currently loaded via margin_init
# Format: "channel:operation:change_percent"
PROFILE_CHANNELS=(
"0:low:3"
"1:low:3"
"2:low:3"
"3:low:5"
"4:low:5"
"5:low:5"
"6:low:5"
"7:low:5"
"8:low:3"
"9:low:3"
"10:nominal:5"
"11:nominal:5"
"12:low:3"
"13:nominal:5"
"14:low:5"
"15:low:3"
)
src/Script_ABC_Blanton/Blanton_Script/LTC2980_Margin_Script/profiles/combo_SWB_CONN15_high.conf
+24
View File
@@ -0,0 +1,24 @@
# Profile: combo_SWB_CONN15_high - every channel margin HIGH, per-channel percentage
# For the SWB CONN15 board only: the percentages follow that board's
# rails, so applying it to a different CONN margins the wrong things.
# Applied to whichever LTC2980 is currently loaded via margin_init
# Format: "channel:operation:change_percent"
PROFILE_CHANNELS=(
"0:high:3"
"1:high:3"
"2:high:3"
"3:high:3"
"4:high:3"
"5:high:3"
"6:high:5"
"7:high:3"
"8:high:5"
"9:high:5"
"10:nominal:5"
"11:high:5"
"12:high:3"
"13:high:3"
"14:high:3"
"15:high:5"
)
src/Script_ABC_Blanton/Blanton_Script/LTC2980_Margin_Script/profiles/combo_SWB_CONN15_low.conf
+24
View File
@@ -0,0 +1,24 @@
# Profile: combo_SWB_CONN15_low - every channel margin LOW, per-channel percentage
# For the SWB CONN15 board only: the percentages follow that board's
# rails, so applying it to a different CONN margins the wrong things.
# Applied to whichever LTC2980 is currently loaded via margin_init
# Format: "channel:operation:change_percent"
PROFILE_CHANNELS=(
"0:low:3"
"1:low:3"
"2:low:3"
"3:low:3"
"4:low:3"
"5:low:3"
"6:low:5"
"7:low:3"
"8:low:5"
"9:low:5"
"10:nominal:5"
"11:low:5"
"12:low:3"
"13:low:3"
"14:low:3"
"15:low:5"
)
src/Script_ABC_Blanton/Blanton_Script/LTC2980_Margin_Script/profiles/combo_SWB_CONN16_high.conf
+24
View File
@@ -0,0 +1,24 @@
# Profile: combo_SWB_CONN16_high - every channel margin HIGH, per-channel percentage
# For the SWB CONN16 board only: the percentages follow that board's
# rails, so applying it to a different CONN margins the wrong things.
# Applied to whichever LTC2980 is currently loaded via margin_init
# Format: "channel:operation:change_percent"
PROFILE_CHANNELS=(
"0:high:3"
"1:high:5"
"2:high:5"
"3:high:5"
"4:high:5"
"5:high:5"
"6:high:5"
"7:high:3"
"8:high:3"
"9:high:3"
"10:high:3"
"11:high:3"
"12:high:3"
"13:high:3"
"14:high:3"
"15:high:3"
)
src/Script_ABC_Blanton/Blanton_Script/LTC2980_Margin_Script/profiles/combo_SWB_CONN16_low.conf
+24
View File
@@ -0,0 +1,24 @@
# Profile: combo_SWB_CONN16_low - every channel margin LOW, per-channel percentage
# For the SWB CONN16 board only: the percentages follow that board's
# rails, so applying it to a different CONN margins the wrong things.
# Applied to whichever LTC2980 is currently loaded via margin_init
# Format: "channel:operation:change_percent"
PROFILE_CHANNELS=(
"0:low:3"
"1:low:5"
"2:low:5"
"3:low:5"
"4:low:5"
"5:low:5"
"6:low:5"
"7:low:3"
"8:low:3"
"9:low:3"
"10:low:3"
"11:low:3"
"12:low:3"
"13:low:3"
"14:low:3"
"15:low:3"
)
src/Script_ABC_Blanton/Blanton_Script/LTC2980_Margin_Script/script/margin_apply_profile_all.sh
+17 -10
View File
@@ -17,17 +17,24 @@ BOARDS=(
"Blanton_SWB1_CONN16"
)
# 對應的 profile 名稱（不含路徑與 .conf 副檔名），預設全部 comboA
# 對應的 profile 名稱（不含路徑與 .conf 副檔名）。
#
# SWB 的 profile 是 per-CONN 的：百分比對應該片板子的軌，套到別的 CONN 會 margin
# 到錯的東西，所以這裡不能全部填同一個名字。
#
# 這份預設是 HIGH 那一輪；LOW 那一輪把下面的 _high 全換成 _low 再跑一次
# （或 sed -i 's/_high/_low/' 這個檔）。
# CB 沒有 per-CONN profile，沿用通用的 combo_high3 / combo_low3。
PROFILES=(
"comboA" # Blanton_CB_CONN13
"comboA" # Blanton_SWB0_CONN13
"comboA" # Blanton_SWB0_CONN14
"comboA" # Blanton_SWB0_CONN15
"comboA" # Blanton_SWB0_CONN16
"comboA" # Blanton_SWB1_CONN13
"comboA" # Blanton_SWB1_CONN14
"comboA" # Blanton_SWB1_CONN15
"comboA" # Blanton_SWB1_CONN16
"combo_high3" # Blanton_CB_CONN13 (低壓軌多，用通用 +3%)
"combo_SWB_CONN13_high" # Blanton_SWB0_CONN13
"combo_SWB_CONN14_high" # Blanton_SWB0_CONN14
"combo_SWB_CONN15_high" # Blanton_SWB0_CONN15
"combo_SWB_CONN16_high" # Blanton_SWB0_CONN16
"combo_SWB_CONN13_high" # Blanton_SWB1_CONN13
"combo_SWB_CONN14_high" # Blanton_SWB1_CONN14
"combo_SWB_CONN15_high" # Blanton_SWB1_CONN15
"combo_SWB_CONN16_high" # Blanton_SWB1_CONN16
)
# --- Source margin.sh if not already loaded ---
src/Script_ABC_Blanton/Blanton_Script/LTC2980_Margin_Script/script/margin_save_all.sh
+4
View File
@@ -4,6 +4,10 @@
# ⚠️ margin_save 會把目前的 margin / OV / UV 設定**永久寫入 NVM**，
# 斷電後仍保留。執行前請務必先 margin_status 確認各 channel 狀態正確。
#
# 全部 9 顆請直接用 margin.sh v2.7.0 內建的 `margin_save all` —— 它有成功/失敗總結，
# 跑完還會把 margin_init 切回你原本載入的那顆。這支只在「只想寫其中幾顆」時才需要，
# 編下面的 BOARDS 陣列。
#
# Usage:
# source script/margin_save_all.sh
src/Script_ABC_Blanton/Blanton_Script/LTC2980_Margin_Script/settings/Blanton_CB_CONN13.conf
+52 -52
View File
@@ -1,52 +1,52 @@
# Blanton Channel Settings
# Format: CH<n>_VNOM=voltage CH<n>_NET=net_name
#
# Channel numbering (Script Channel, per Blanton_Margin_List):
# ch_global / 8 -> CHIPS index (0~17)
# ch_global % 8 -> page within LTC2977 (0~7)
# One LTC2980 = two LTC2977 (8ch each), controlled via 2 I2C addresses.
# --- Transport (blank = i2c): CB's LTC2980 is on the native I2C bus, driven by
# i2cset/i2cget. Only SWB boards set TRANSPORT="swb" + CB_I2C_CH=<6|7|8|9>. ---
TRANSPORT=""
CB_I2C_CH=
# --- I2C Configuration ---
# Format: "bus:address" (8 channels per entry / per LTC2977)
CHIPS=(
# chip1: CB (CONN13)
"4:0x5C" # CH0 ~ CH7
"4:0x5E" # CH8 ~ CH15
)
# Pre-commands to run before accessing each chip (empty = none)
# Multiple commands separated by ;
CHIP_PRE_CMD=(
"" # CB CONN13 (lo)
)
# Post-commands to run after accessing each chip (optional, empty = none)
CHIP_POST_CMD=(
"" # CB CONN13 (lo)
)
# ============================================================
# chip1: CB (CONN13)
# ============================================================
CH0_VNOM="5.0"; CH0_NET="V5P0_ALW"
CH1_VNOM="3.3"; CH1_NET="V3P3_ALW"
CH2_VNOM="0.75"; CH2_NET="PWR_VDD_MISC_ALW"
CH3_VNOM="1.8"; CH3_NET="V1P8_ALW"
CH4_VNOM="1.1"; CH4_NET="PWR_APU_VDDIO_SUS"
CH5_VNOM="0.75"; CH5_NET="PWR_VDD_MISC_RUN"
CH6_VNOM="0.78"; CH6_NET="PWR_APU_VDD_MEM_RUN"
CH7_VNOM="0.8"; CH7_NET="V0P8_PHY2_DVDD"
CH8_VNOM="0.8"; CH8_NET="V0P8_AVDD"
CH9_VNOM="0.8"; CH9_NET="V0P8_PHY"
CH10_VNOM="1.8"; CH10_NET="V1P8_FPGA"
CH11_VNOM="2.5"; CH11_NET="V2P5_FPGA"
CH12_VNOM="1.1"; CH12_NET="V1P1_FPGA"
CH13_VNOM="5.0"; CH13_NET="P5V_STBY"
CH14_VNOM="3.3"; CH14_NET="P3V3_STBY"
CH15_VNOM="0.8"; CH15_NET="V0P8_PHY2_AVDD"
# Blanton Channel Settings
# Format: CH<n>_VNOM=voltage CH<n>_NET=net_name
#
# Channel numbering (Script Channel, per Blanton_Margin_List):
# ch_global / 8 -> CHIPS index (0~17)
# ch_global % 8 -> page within LTC2977 (0~7)
# One LTC2980 = two LTC2977 (8ch each), controlled via 2 I2C addresses.
# --- Transport (blank = i2c): CB's LTC2980 is on the native I2C bus, driven by
# i2cset/i2cget. Only SWB boards set TRANSPORT="swb" + CB_I2C_CH=<6|7|8|9>. ---
TRANSPORT=""
CB_I2C_CH=
# --- I2C Configuration ---
# Format: "bus:address" (8 channels per entry / per LTC2977)
CHIPS=(
# chip1: CB (CONN13)
"4:0x5C" # CH0 ~ CH7
"4:0x5E" # CH8 ~ CH15
)
# Pre-commands to run before accessing each chip (empty = none)
# Multiple commands separated by ;
CHIP_PRE_CMD=(
"" # CB CONN13 (lo)
)
# Post-commands to run after accessing each chip (optional, empty = none)
CHIP_POST_CMD=(
"" # CB CONN13 (lo)
)
# ============================================================
# chip1: CB (CONN13)
# ============================================================
CH0_VNOM="5.0"; CH0_NET="V5P0_ALW"
CH1_VNOM="3.3"; CH1_NET="V3P3_ALW"
CH2_VNOM="0.75"; CH2_NET="PWR_VDD_MISC_ALW"
CH3_VNOM="1.8"; CH3_NET="V1P8_ALW"
CH4_VNOM="1.1"; CH4_NET="PWR_APU_VDDIO_SUS"
CH5_VNOM="0.75"; CH5_NET="PWR_VDD_MISC_RUN"
CH6_VNOM="0.78"; CH6_NET="PWR_APU_VDD_MEM_RUN"
CH7_VNOM="0.816"; CH7_NET="V0P8_PHY2_DVDD"
CH8_VNOM="0.8"; CH8_NET="V0P8_AVDD"
CH9_VNOM="0.8"; CH9_NET="V0P8_PHY"
CH10_VNOM="1.8"; CH10_NET="V1P8_FPGA"
CH11_VNOM="2.5"; CH11_NET="V2P5_FPGA"
CH12_VNOM="1.1"; CH12_NET="V1P1_FPGA"
CH13_VNOM="5.0"; CH13_NET="P5V_STBY"
CH14_VNOM="3.3"; CH14_NET="P3V3_STBY"
CH15_VNOM="0.816"; CH15_NET="V0P8_PHY2_AVDD"
src/Script_ABC_Blanton/Blanton_Script/LTC2980_Margin_Script/settings/Blanton_SWB0_CONN13.conf
+52 -52
View File
@@ -1,52 +1,52 @@
# Blanton Channel Settings
# Format: CH<n>_VNOM=voltage CH<n>_NET=net_name
#
# Channel numbering (Script Channel, per Blanton_Margin_List):
# ch_global / 8 -> CHIPS index (0~17)
# ch_global % 8 -> page within LTC2977 (0~7)
# One LTC2980 = two LTC2977 (8ch each), controlled via 2 I2C addresses.
# --- SWB transport (added): this LTC2980 sits behind the CB FPGA F3 I2C; reach
# it with cb_pmbus, not i2cset. CB_I2C_CH = FPGA I2C channel for this CONN. ---
TRANSPORT="swb"
CB_I2C_CH=6 # CB F3 Ch6 = SWB0 CONN13/CONN14 (shared with CONN14, addr must differ)
# --- I2C Configuration ---
# Format: "bus:address" (8 channels per entry / per LTC2977)
CHIPS=(
# chip1: SWB0 (CONN13)
"0:0x5C" # CH0 ~ CH7
"0:0x5E" # CH8 ~ CH15
)
# Pre-commands to run before accessing each chip (empty = none)
# Multiple commands separated by ;
CHIP_PRE_CMD=(
"" # SWB0 CONN13 (lo)
)
# Post-commands to run after accessing each chip (optional, empty = none)
CHIP_POST_CMD=(
"" # SWB0 CONN13 (lo)
)
# ============================================================
# chip1: SWB0 (CONN13)
# ============================================================
CH0_VNOM="0.75"; CH0_NET="P0V75_DVDD_47"
CH1_VNOM="0.75"; CH1_NET="P0V75_AVDD_47"
CH2_VNOM="1.5"; CH2_NET="P1V5_AVDD_47"
CH3_VNOM="0.9"; CH3_NET="P0V9_AVDD_47"
CH4_VNOM="1.8"; CH4_NET="P1V8_1"
CH5_VNOM="3.3"; CH5_NET="PVDD3_3V_SYNTH_LDO_A3"
CH6_VNOM="3.3"; CH6_NET="PVDD3_3V_SYNTH_LDO_B1"
CH7_VNOM="1.8"; CH7_NET="P1V8_3"
CH8_VNOM="1.8"; CH8_NET="P1V8_DVDDIO_3"
CH9_VNOM="0.75"; CH9_NET="P0V75_DVDD_39"
CH10_VNOM="0.75"; CH10_NET="P0V75_AVDD_39"
CH11_VNOM="1.5"; CH11_NET="P1V5_AVDD_39"
CH12_VNOM="0.9"; CH12_NET="P0V9_AVDD_39"
CH13_VNOM="1.5"; CH13_NET="PVDD1V5_2"
CH14_VNOM="1.8"; CH14_NET="PVDD1V8_DUT"
CH15_VNOM="1.2"; CH15_NET="PVDD_MDIO"
# Blanton Channel Settings
# Format: CH<n>_VNOM=voltage CH<n>_NET=net_name
#
# Channel numbering (Script Channel, per Blanton_Margin_List):
# ch_global / 8 -> CHIPS index (0~17)
# ch_global % 8 -> page within LTC2977 (0~7)
# One LTC2980 = two LTC2977 (8ch each), controlled via 2 I2C addresses.
# --- SWB transport (added): this LTC2980 sits behind the CB FPGA F3 I2C; reach
# it with cb_pmbus, not i2cset. CB_I2C_CH = FPGA I2C channel for this CONN. ---
TRANSPORT="swb"
CB_I2C_CH=8 # CB F3 Ch8 = SWB0 CONN13/CONN15 (shared with CONN15, addr must differ)
# --- I2C Configuration ---
# Format: "bus:address" (8 channels per entry / per LTC2977)
CHIPS=(
# chip1: SWB0 (CONN13)
"0:0x5C" # CH0 ~ CH7
"0:0x5E" # CH8 ~ CH15
)
# Pre-commands to run before accessing each chip (empty = none)
# Multiple commands separated by ;
CHIP_PRE_CMD=(
"" # SWB0 CONN13 (lo)
)
# Post-commands to run after accessing each chip (optional, empty = none)
CHIP_POST_CMD=(
"" # SWB0 CONN13 (lo)
)
# ============================================================
# chip1: SWB0 (CONN13)
# ============================================================
CH0_VNOM="0.75"; CH0_NET="P0V75_DVDD_47"
CH1_VNOM="0.756"; CH1_NET="P0V75_AVDD_47"
CH2_VNOM="1.524"; CH2_NET="P1V5_AVDD_47"
CH3_VNOM="0.915"; CH3_NET="P0V9_AVDD_47"
CH4_VNOM="1.816"; CH4_NET="P1V8_1"
CH5_VNOM="3.38"; CH5_NET="PVDD3_3V_SYNTH_LDO_A3"
CH6_VNOM="3.38"; CH6_NET="PVDD3_3V_SYNTH_LDO_B1"
CH7_VNOM="1.816"; CH7_NET="P1V8_3"
CH8_VNOM="1.8"; CH8_NET="P1V8_DVDDIO_3"
CH9_VNOM="0.75"; CH9_NET="P0V75_DVDD_39"
CH10_VNOM="0.756"; CH10_NET="P0V75_AVDD_39"
CH11_VNOM="1.524"; CH11_NET="P1V5_AVDD_39"
CH12_VNOM="0.915"; CH12_NET="P0V9_AVDD_39"
CH13_VNOM="1.5"; CH13_NET="PVDD1V5_2"
CH14_VNOM="1.8"; CH14_NET="PVDD1V8_DUT"
CH15_VNOM="1.2"; CH15_NET="PVDD_MDIO"
src/Script_ABC_Blanton/Blanton_Script/LTC2980_Margin_Script/settings/Blanton_SWB0_CONN14.conf
+52 -52
View File
@@ -1,52 +1,52 @@
# Blanton Channel Settings
# Format: CH<n>_VNOM=voltage CH<n>_NET=net_name
#
# Channel numbering (Script Channel, per Blanton_Margin_List):
# ch_global / 8 -> CHIPS index (0~17)
# ch_global % 8 -> page within LTC2977 (0~7)
# One LTC2980 = two LTC2977 (8ch each), controlled via 2 I2C addresses.
# --- SWB transport (added): this LTC2980 sits behind the CB FPGA F3 I2C; reach
# it with cb_pmbus, not i2cset. CB_I2C_CH = FPGA I2C channel for this CONN. ---
TRANSPORT="swb"
CB_I2C_CH=6 # CB F3 Ch6 = SWB0 CONN13/CONN14 (shared with CONN13, addr must differ)
# --- I2C Configuration ---
# Format: "bus:address" (8 channels per entry / per LTC2977)
CHIPS=(
# chip1: SWB0 (CONN14)
"0:0x5E" # CH0 ~ CH7
"0:0x5F" # CH8 ~ CH15
)
# Pre-commands to run before accessing each chip (empty = none)
# Multiple commands separated by ;
CHIP_PRE_CMD=(
"" # SWB0 CONN14 (lo)
)
# Post-commands to run after accessing each chip (optional, empty = none)
CHIP_POST_CMD=(
"" # SWB0 CONN14 (lo)
)
# ============================================================
# chip1: SWB0 (CONN14)
# ============================================================
CH0_VNOM="0.75"; CH0_NET="P0V75_AVDD_7"
CH1_VNOM="1.5"; CH1_NET="P1V5_AVDD_7"
CH2_VNOM="0.9"; CH2_NET="P0V9_AVDD_7"
CH3_VNOM="1.8"; CH3_NET="P1V8_5"
CH4_VNOM="1.8"; CH4_NET="P1V8_2"
CH5_VNOM="3.3"; CH5_NET="PVDD3_3V_SYNTH_LDO_B2"
CH6_VNOM="3.3"; CH6_NET="PVDD3_3V_SYNTH_LDO_A2"
CH7_VNOM="3.3"; CH7_NET="PVDD3_3V_SYNTH_LDO_A1"
CH8_VNOM="1.5"; CH8_NET="PVDD1V5_TSC"
CH9_VNOM="1.5"; CH9_NET="PVDD1V5_ANLG"
CH10_VNOM="-"; CH10_NET="NC"
CH11_VNOM="-"; CH11_NET="NC"
CH12_VNOM="1.5"; CH12_NET="PVDD1V5_1"
CH13_VNOM="-"; CH13_NET="NC"
CH14_VNOM="1.8"; CH14_NET="P1V8_DVDDIO_1"
CH15_VNOM="0.75"; CH15_NET="P0V75_DVDD_7"
# Blanton Channel Settings
# Format: CH<n>_VNOM=voltage CH<n>_NET=net_name
#
# Channel numbering (Script Channel, per Blanton_Margin_List):
# ch_global / 8 -> CHIPS index (0~17)
# ch_global % 8 -> page within LTC2977 (0~7)
# One LTC2980 = two LTC2977 (8ch each), controlled via 2 I2C addresses.
# --- SWB transport (added): this LTC2980 sits behind the CB FPGA F3 I2C; reach
# it with cb_pmbus, not i2cset. CB_I2C_CH = FPGA I2C channel for this CONN. ---
TRANSPORT="swb"
CB_I2C_CH=6 # CB F3 Ch6 = SWB0 CONN14/CONN16 (shared with CONN16, addr must differ)
# --- I2C Configuration ---
# Format: "bus:address" (8 channels per entry / per LTC2977)
CHIPS=(
# chip1: SWB0 (CONN14)
"0:0x5C" # CH0 ~ CH7
"0:0x5E" # CH8 ~ CH15
)
# Pre-commands to run before accessing each chip (empty = none)
# Multiple commands separated by ;
CHIP_PRE_CMD=(
"" # SWB0 CONN14 (lo)
)
# Post-commands to run after accessing each chip (optional, empty = none)
CHIP_POST_CMD=(
"" # SWB0 CONN14 (lo)
)
# ============================================================
# chip1: SWB0 (CONN14)
# ============================================================
CH0_VNOM="0.756"; CH0_NET="P0V75_AVDD_7"
CH1_VNOM="1.524"; CH1_NET="P1V5_AVDD_7"
CH2_VNOM="0.915"; CH2_NET="P0V9_AVDD_7"
CH3_VNOM="1.816"; CH3_NET="P1V8_5"
CH4_VNOM="1.816"; CH4_NET="P1V8_2"
CH5_VNOM="3.38"; CH5_NET="PVDD3_3V_SYNTH_LDO_B2"
CH6_VNOM="3.38"; CH6_NET="PVDD3_3V_SYNTH_LDO_A2"
CH7_VNOM="3.38"; CH7_NET="PVDD3_3V_SYNTH_LDO_A1"
CH8_VNOM="1.516"; CH8_NET="PVDD1V5_TSC"
CH9_VNOM="1.516"; CH9_NET="PVDD1V5_ANLG"
CH10_VNOM="-"; CH10_NET="NC"
CH11_VNOM="-"; CH11_NET="NC"
CH12_VNOM="1.5"; CH12_NET="PVDD1V5_1"
CH13_VNOM="-"; CH13_NET="NC"
CH14_VNOM="1.8"; CH14_NET="P1V8_DVDDIO_1"
CH15_VNOM="0.75"; CH15_NET="P0V75_DVDD_7"
src/Script_ABC_Blanton/Blanton_Script/LTC2980_Margin_Script/settings/Blanton_SWB0_CONN15.conf
+52 -52
View File
@@ -1,52 +1,52 @@
# Blanton Channel Settings
# Format: CH<n>_VNOM=voltage CH<n>_NET=net_name
#
# Channel numbering (Script Channel, per Blanton_Margin_List):
# ch_global / 8 -> CHIPS index (0~17)
# ch_global % 8 -> page within LTC2977 (0~7)
# One LTC2980 = two LTC2977 (8ch each), controlled via 2 I2C addresses.
# --- SWB transport (added): this LTC2980 sits behind the CB FPGA F3 I2C; reach
# it with cb_pmbus, not i2cset. CB_I2C_CH = FPGA I2C channel for this CONN. ---
TRANSPORT="swb"
CB_I2C_CH=8 # CB F3 Ch8 = SWB0 CONN15/CONN16 (shared with CONN16, addr must differ)
# --- I2C Configuration ---
# Format: "bus:address" (8 channels per entry / per LTC2977)
CHIPS=(
# chip1: SWB0 (CONN15)
"0:0x62" # CH0 ~ CH7
"0:0x63" # CH8 ~ CH15
)
# Pre-commands to run before accessing each chip (empty = none)
# Multiple commands separated by ;
CHIP_PRE_CMD=(
"" # SWB0 CONN15 (lo)
)
# Post-commands to run after accessing each chip (optional, empty = none)
CHIP_POST_CMD=(
"" # SWB0 CONN15 (lo)
)
# ============================================================
# chip1: SWB0 (CONN15)
# ============================================================
CH0_VNOM="1.5"; CH0_NET="P1V5_AVDD_55"
CH1_VNOM="0.9"; CH1_NET="P0V9_AVDD_55"
CH2_VNOM="0.75"; CH2_NET="P0V75_DVDD_63"
CH3_VNOM="0.75"; CH3_NET="P0V75_AVDD_63"
CH4_VNOM="1.5"; CH4_NET="P1V5_AVDD_63"
CH5_VNOM="0.9"; CH5_NET="P0V9_AVDD_63"
CH6_VNOM="3.3"; CH6_NET="PVDD3_3V_SYNTH_LDO_B3"
CH7_VNOM="1.5"; CH7_NET="PVDD1V5_3"
CH8_VNOM="0.85"; CH8_NET="P0V85_STBY"
CH9_VNOM="1.8"; CH9_NET="P1V8_STBY"
CH10_VNOM="-"; CH10_NET="NC"
CH11_VNOM="3.3"; CH11_NET="P3V3_STBY"
CH12_VNOM="0.9"; CH12_NET="PVDD0V9_2"
CH13_VNOM="0.75"; CH13_NET="P0V75_DVDD_55"
CH14_VNOM="0.75"; CH14_NET="P0V75_AVDD_55"
CH15_VNOM="1.8"; CH15_NET="P1V8_DVDDIO_4"
# Blanton Channel Settings
# Format: CH<n>_VNOM=voltage CH<n>_NET=net_name
#
# Channel numbering (Script Channel, per Blanton_Margin_List):
# ch_global / 8 -> CHIPS index (0~17)
# ch_global % 8 -> page within LTC2977 (0~7)
# One LTC2980 = two LTC2977 (8ch each), controlled via 2 I2C addresses.
# --- SWB transport (added): this LTC2980 sits behind the CB FPGA F3 I2C; reach
# it with cb_pmbus, not i2cset. CB_I2C_CH = FPGA I2C channel for this CONN. ---
TRANSPORT="swb"
CB_I2C_CH=8 # CB F3 Ch8 = SWB0 CONN13/CONN15 (shared with CONN13, addr must differ)
# --- I2C Configuration ---
# Format: "bus:address" (8 channels per entry / per LTC2977)
CHIPS=(
# chip1: SWB0 (CONN15)
"0:0x62" # CH0 ~ CH7
"0:0x64" # CH8 ~ CH15
)
# Pre-commands to run before accessing each chip (empty = none)
# Multiple commands separated by ;
CHIP_PRE_CMD=(
"" # SWB0 CONN15 (lo)
)
# Post-commands to run after accessing each chip (optional, empty = none)
CHIP_POST_CMD=(
"" # SWB0 CONN15 (lo)
)
# ============================================================
# chip1: SWB0 (CONN15)
# ============================================================
CH0_VNOM="1.524"; CH0_NET="P1V5_AVDD_55"
CH1_VNOM="0.915"; CH1_NET="P0V9_AVDD_55"
CH2_VNOM="0.75"; CH2_NET="P0V75_DVDD_63"
CH3_VNOM="0.756"; CH3_NET="P0V75_AVDD_63"
CH4_VNOM="1.524"; CH4_NET="P1V5_AVDD_63"
CH5_VNOM="0.915"; CH5_NET="P0V9_AVDD_63"
CH6_VNOM="3.38"; CH6_NET="PVDD3_3V_SYNTH_LDO_B3"
CH7_VNOM="1.5"; CH7_NET="PVDD1V5_3"
CH8_VNOM="0.85"; CH8_NET="P0V85_STBY"
CH9_VNOM="1.8"; CH9_NET="P1V8_STBY"
CH10_VNOM="-"; CH10_NET="NC"
CH11_VNOM="3.3"; CH11_NET="P3V3_STBY"
CH12_VNOM="0.91"; CH12_NET="PVDD0V9_2"
CH13_VNOM="0.75"; CH13_NET="P0V75_DVDD_55"
CH14_VNOM="0.756"; CH14_NET="P0V75_AVDD_55"
CH15_VNOM="1.8"; CH15_NET="P1V8_DVDDIO_4"
src/Script_ABC_Blanton/Blanton_Script/LTC2980_Margin_Script/settings/Blanton_SWB0_CONN16.conf
+52 -52
View File
@@ -1,52 +1,52 @@
# Blanton Channel Settings
# Format: CH<n>_VNOM=voltage CH<n>_NET=net_name
#
# Channel numbering (Script Channel, per Blanton_Margin_List):
# ch_global / 8 -> CHIPS index (0~17)
# ch_global % 8 -> page within LTC2977 (0~7)
# One LTC2980 = two LTC2977 (8ch each), controlled via 2 I2C addresses.
# --- SWB transport (added): this LTC2980 sits behind the CB FPGA F3 I2C; reach
# it with cb_pmbus, not i2cset. CB_I2C_CH = FPGA I2C channel for this CONN. ---
TRANSPORT="swb"
CB_I2C_CH=8 # CB F3 Ch8 = SWB0 CONN15/CONN16 (shared with CONN15, addr must differ)
# --- I2C Configuration ---
# Format: "bus:address" (8 channels per entry / per LTC2977)
CHIPS=(
# chip1: SWB0 (CONN16)
"0:0x64" # CH0 ~ CH7
"0:0x65" # CH8 ~ CH15
)
# Pre-commands to run before accessing each chip (empty = none)
# Multiple commands separated by ;
CHIP_PRE_CMD=(
"" # SWB0 CONN16 (lo)
)
# Post-commands to run after accessing each chip (optional, empty = none)
CHIP_POST_CMD=(
"" # SWB0 CONN16 (lo)
)
# ============================================================
# chip1: SWB0 (CONN16)
# ============================================================
CH0_VNOM="1.5"; CH0_NET="PVDD1V5_0"
CH1_VNOM="1.8"; CH1_NET="P1V8_4"
CH2_VNOM="3.3"; CH2_NET="PVDD3_3V_SYNTH_LDO_B5"
CH3_VNOM="3.3"; CH3_NET="PVDD3_3V_SYNTH_LDO_A5"
CH4_VNOM="3.3"; CH4_NET="PVDD3_3V_SYNTH_LDO_B4"
CH5_VNOM="3.3"; CH5_NET="PVDD3_3V_SYNTH_LDO_A4"
CH6_VNOM="3.3"; CH6_NET="P3V3"
CH7_VNOM="0.8"; CH7_NET="PVDD0_8V_T3"
CH8_VNOM="0.75"; CH8_NET="P0V75_DVDD_1"
CH9_VNOM="0.75"; CH9_NET="P0V75_AVDD_1"
CH10_VNOM="1.5"; CH10_NET="P1V5_AVDD_1"
CH11_VNOM="0.9"; CH11_NET="P0V9_AVDD_1"
CH12_VNOM="0.9"; CH12_NET="PVDD0V9_0"
CH13_VNOM="0.9"; CH13_NET="PVDD0V9_1"
CH14_VNOM="0.9"; CH14_NET="PVDD0V9_3"
CH15_VNOM="1.2"; CH15_NET="PVDD1V2_T3"
# Blanton Channel Settings
# Format: CH<n>_VNOM=voltage CH<n>_NET=net_name
#
# Channel numbering (Script Channel, per Blanton_Margin_List):
# ch_global / 8 -> CHIPS index (0~17)
# ch_global % 8 -> page within LTC2977 (0~7)
# One LTC2980 = two LTC2977 (8ch each), controlled via 2 I2C addresses.
# --- SWB transport (added): this LTC2980 sits behind the CB FPGA F3 I2C; reach
# it with cb_pmbus, not i2cset. CB_I2C_CH = FPGA I2C channel for this CONN. ---
TRANSPORT="swb"
CB_I2C_CH=6 # CB F3 Ch6 = SWB0 CONN14/CONN16 (shared with CONN14, addr must differ)
# --- I2C Configuration ---
# Format: "bus:address" (8 channels per entry / per LTC2977)
CHIPS=(
# chip1: SWB0 (CONN16)
"0:0x62" # CH0 ~ CH7
"0:0x64" # CH8 ~ CH15
)
# Pre-commands to run before accessing each chip (empty = none)
# Multiple commands separated by ;
CHIP_PRE_CMD=(
"" # SWB0 CONN16 (lo)
)
# Post-commands to run after accessing each chip (optional, empty = none)
CHIP_POST_CMD=(
"" # SWB0 CONN16 (lo)
)
# ============================================================
# chip1: SWB0 (CONN16)
# ============================================================
CH0_VNOM="1.5"; CH0_NET="PVDD1V5_0"
CH1_VNOM="1.816"; CH1_NET="P1V8_4"
CH2_VNOM="3.38"; CH2_NET="PVDD3_3V_SYNTH_LDO_B5"
CH3_VNOM="3.38"; CH3_NET="PVDD3_3V_SYNTH_LDO_A5"
CH4_VNOM="3.38"; CH4_NET="PVDD3_3V_SYNTH_LDO_B4"
CH5_VNOM="3.38"; CH5_NET="PVDD3_3V_SYNTH_LDO_A4"
CH6_VNOM="3.327"; CH6_NET="P3V3"
CH7_VNOM="0.82"; CH7_NET="PVDD0_8V_T3"
CH8_VNOM="0.75"; CH8_NET="P0V75_DVDD_1"
CH9_VNOM="0.756"; CH9_NET="P0V75_AVDD_1"
CH10_VNOM="1.524"; CH10_NET="P1V5_AVDD_1"
CH11_VNOM="0.915"; CH11_NET="P0V9_AVDD_1"
CH12_VNOM="0.915"; CH12_NET="PVDD0V9_0"
CH13_VNOM="0.91"; CH13_NET="PVDD0V9_1"
CH14_VNOM="0.915"; CH14_NET="PVDD0V9_3"
CH15_VNOM="1.224"; CH15_NET="PVDD1V2_T3"
src/Script_ABC_Blanton/Blanton_Script/LTC2980_Margin_Script/settings/Blanton_SWB1_CONN13.conf
+52 -52
View File
@@ -1,52 +1,52 @@
# Blanton Channel Settings
# Format: CH<n>_VNOM=voltage CH<n>_NET=net_name
#
# Channel numbering (Script Channel, per Blanton_Margin_List):
# ch_global / 8 -> CHIPS index (0~17)
# ch_global % 8 -> page within LTC2977 (0~7)
# One LTC2980 = two LTC2977 (8ch each), controlled via 2 I2C addresses.
# --- SWB transport (added): this LTC2980 sits behind the CB FPGA F3 I2C; reach
# it with cb_pmbus, not i2cset. CB_I2C_CH = FPGA I2C channel for this CONN. ---
TRANSPORT="swb"
CB_I2C_CH=7 # CB F3 Ch7 = SWB1 CONN13/CONN14 (shared with CONN14, addr must differ)
# --- I2C Configuration ---
# Format: "bus:address" (8 channels per entry / per LTC2977)
CHIPS=(
# chip1: SWB1 (CONN13)
"1:0x5C" # CH0 ~ CH7
"1:0x5D" # CH8 ~ CH15
)
# Pre-commands to run before accessing each chip (empty = none)
# Multiple commands separated by ;
CHIP_PRE_CMD=(
"" # SWB1 CONN13 (lo)
)
# Post-commands to run after accessing each chip (optional, empty = none)
CHIP_POST_CMD=(
"" # SWB1 CONN13 (lo)
)
# ============================================================
# chip1: SWB1 (CONN13)
# ============================================================
CH0_VNOM="0.75"; CH0_NET="P0V75_DVDD_47"
CH1_VNOM="0.75"; CH1_NET="P0V75_AVDD_47"
CH2_VNOM="1.5"; CH2_NET="P1V5_AVDD_47"
CH3_VNOM="0.9"; CH3_NET="P0V9_AVDD_47"
CH4_VNOM="1.8"; CH4_NET="P1V8_1"
CH5_VNOM="3.3"; CH5_NET="PVDD3_3V_SYNTH_LDO_A3"
CH6_VNOM="3.3"; CH6_NET="PVDD3_3V_SYNTH_LDO_B1"
CH7_VNOM="1.8"; CH7_NET="P1V8_3"
CH8_VNOM="1.8"; CH8_NET="P1V8_DVDDIO_3"
CH9_VNOM="0.75"; CH9_NET="P0V75_DVDD_39"
CH10_VNOM="0.75"; CH10_NET="P0V75_AVDD_39"
CH11_VNOM="1.5"; CH11_NET="P1V5_AVDD_39"
CH12_VNOM="0.9"; CH12_NET="P0V9_AVDD_39"
CH13_VNOM="1.5"; CH13_NET="PVDD1V5_2"
CH14_VNOM="1.8"; CH14_NET="PVDD1V8_DUT"
CH15_VNOM="1.2"; CH15_NET="PVDD_MDIO"
# Blanton Channel Settings
# Format: CH<n>_VNOM=voltage CH<n>_NET=net_name
#
# Channel numbering (Script Channel, per Blanton_Margin_List):
# ch_global / 8 -> CHIPS index (0~17)
# ch_global % 8 -> page within LTC2977 (0~7)
# One LTC2980 = two LTC2977 (8ch each), controlled via 2 I2C addresses.
# --- SWB transport (added): this LTC2980 sits behind the CB FPGA F3 I2C; reach
# it with cb_pmbus, not i2cset. CB_I2C_CH = FPGA I2C channel for this CONN. ---
TRANSPORT="swb"
CB_I2C_CH=9 # CB F3 Ch9 = SWB1 CONN13/CONN15 (shared with CONN15, addr must differ)
# --- I2C Configuration ---
# Format: "bus:address" (8 channels per entry / per LTC2977)
CHIPS=(
# chip1: SWB1 (CONN13)
"1:0x5C" # CH0 ~ CH7
"1:0x5E" # CH8 ~ CH15
)
# Pre-commands to run before accessing each chip (empty = none)
# Multiple commands separated by ;
CHIP_PRE_CMD=(
"" # SWB1 CONN13 (lo)
)
# Post-commands to run after accessing each chip (optional, empty = none)
CHIP_POST_CMD=(
"" # SWB1 CONN13 (lo)
)
# ============================================================
# chip1: SWB1 (CONN13)
# ============================================================
CH0_VNOM="0.75"; CH0_NET="P0V75_DVDD_47"
CH1_VNOM="0.756"; CH1_NET="P0V75_AVDD_47"
CH2_VNOM="1.524"; CH2_NET="P1V5_AVDD_47"
CH3_VNOM="0.915"; CH3_NET="P0V9_AVDD_47"
CH4_VNOM="1.816"; CH4_NET="P1V8_1"
CH5_VNOM="3.38"; CH5_NET="PVDD3_3V_SYNTH_LDO_A3"
CH6_VNOM="3.38"; CH6_NET="PVDD3_3V_SYNTH_LDO_B1"
CH7_VNOM="1.816"; CH7_NET="P1V8_3"
CH8_VNOM="1.8"; CH8_NET="P1V8_DVDDIO_3"
CH9_VNOM="0.75"; CH9_NET="P0V75_DVDD_39"
CH10_VNOM="0.756"; CH10_NET="P0V75_AVDD_39"
CH11_VNOM="1.524"; CH11_NET="P1V5_AVDD_39"
CH12_VNOM="0.915"; CH12_NET="P0V9_AVDD_39"
CH13_VNOM="1.5"; CH13_NET="PVDD1V5_2"
CH14_VNOM="1.8"; CH14_NET="PVDD1V8_DUT"
CH15_VNOM="1.2"; CH15_NET="PVDD_MDIO"
src/Script_ABC_Blanton/Blanton_Script/LTC2980_Margin_Script/settings/Blanton_SWB1_CONN14.conf
+52 -52
View File
@@ -1,52 +1,52 @@
# Blanton Channel Settings
# Format: CH<n>_VNOM=voltage CH<n>_NET=net_name
#
# Channel numbering (Script Channel, per Blanton_Margin_List):
# ch_global / 8 -> CHIPS index (0~17)
# ch_global % 8 -> page within LTC2977 (0~7)
# One LTC2980 = two LTC2977 (8ch each), controlled via 2 I2C addresses.
# --- SWB transport (added): this LTC2980 sits behind the CB FPGA F3 I2C; reach
# it with cb_pmbus, not i2cset. CB_I2C_CH = FPGA I2C channel for this CONN. ---
TRANSPORT="swb"
CB_I2C_CH=7 # CB F3 Ch7 = SWB1 CONN13/CONN14 (shared with CONN13, addr must differ)
# --- I2C Configuration ---
# Format: "bus:address" (8 channels per entry / per LTC2977)
CHIPS=(
# chip1: SWB1 (CONN14)
"1:0x5E" # CH0 ~ CH7
"1:0x5F" # CH8 ~ CH15
)
# Pre-commands to run before accessing each chip (empty = none)
# Multiple commands separated by ;
CHIP_PRE_CMD=(
"" # SWB1 CONN14 (lo)
)
# Post-commands to run after accessing each chip (optional, empty = none)
CHIP_POST_CMD=(
"" # SWB1 CONN14 (lo)
)
# ============================================================
# chip1: SWB1 (CONN14)
# ============================================================
CH0_VNOM="0.75"; CH0_NET="P0V75_AVDD_7"
CH1_VNOM="1.5"; CH1_NET="P1V5_AVDD_7"
CH2_VNOM="0.9"; CH2_NET="P0V9_AVDD_7"
CH3_VNOM="1.8"; CH3_NET="P1V8_5"
CH4_VNOM="1.8"; CH4_NET="P1V8_2"
CH5_VNOM="3.3"; CH5_NET="PVDD3_3V_SYNTH_LDO_B2"
CH6_VNOM="3.3"; CH6_NET="PVDD3_3V_SYNTH_LDO_A2"
CH7_VNOM="3.3"; CH7_NET="PVDD3_3V_SYNTH_LDO_A1"
CH8_VNOM="1.5"; CH8_NET="PVDD1V5_TSC"
CH9_VNOM="1.5"; CH9_NET="PVDD1V5_ANLG"
CH10_VNOM="-"; CH10_NET="NC"
CH11_VNOM="-"; CH11_NET="NC"
CH12_VNOM="1.5"; CH12_NET="PVDD1V5_1"
CH13_VNOM="-"; CH13_NET="NC"
CH14_VNOM="1.8"; CH14_NET="P1V8_DVDDIO_1"
CH15_VNOM="0.75"; CH15_NET="P0V75_DVDD_7"
# Blanton Channel Settings
# Format: CH<n>_VNOM=voltage CH<n>_NET=net_name
#
# Channel numbering (Script Channel, per Blanton_Margin_List):
# ch_global / 8 -> CHIPS index (0~17)
# ch_global % 8 -> page within LTC2977 (0~7)
# One LTC2980 = two LTC2977 (8ch each), controlled via 2 I2C addresses.
# --- SWB transport (added): this LTC2980 sits behind the CB FPGA F3 I2C; reach
# it with cb_pmbus, not i2cset. CB_I2C_CH = FPGA I2C channel for this CONN. ---
TRANSPORT="swb"
CB_I2C_CH=7 # CB F3 Ch7 = SWB1 CONN14/CONN16 (shared with CONN16, addr must differ)
# --- I2C Configuration ---
# Format: "bus:address" (8 channels per entry / per LTC2977)
CHIPS=(
# chip1: SWB1 (CONN14)
"1:0x5C" # CH0 ~ CH7
"1:0x5E" # CH8 ~ CH15
)
# Pre-commands to run before accessing each chip (empty = none)
# Multiple commands separated by ;
CHIP_PRE_CMD=(
"" # SWB1 CONN14 (lo)
)
# Post-commands to run after accessing each chip (optional, empty = none)
CHIP_POST_CMD=(
"" # SWB1 CONN14 (lo)
)
# ============================================================
# chip1: SWB1 (CONN14)
# ============================================================
CH0_VNOM="0.756"; CH0_NET="P0V75_AVDD_7"
CH1_VNOM="1.524"; CH1_NET="P1V5_AVDD_7"
CH2_VNOM="0.915"; CH2_NET="P0V9_AVDD_7"
CH3_VNOM="1.816"; CH3_NET="P1V8_5"
CH4_VNOM="1.816"; CH4_NET="P1V8_2"
CH5_VNOM="3.38"; CH5_NET="PVDD3_3V_SYNTH_LDO_B2"
CH6_VNOM="3.38"; CH6_NET="PVDD3_3V_SYNTH_LDO_A2"
CH7_VNOM="3.38"; CH7_NET="PVDD3_3V_SYNTH_LDO_A1"
CH8_VNOM="1.516"; CH8_NET="PVDD1V5_TSC"
CH9_VNOM="1.516"; CH9_NET="PVDD1V5_ANLG"
CH10_VNOM="-"; CH10_NET="NC"
CH11_VNOM="-"; CH11_NET="NC"
CH12_VNOM="1.5"; CH12_NET="PVDD1V5_1"
CH13_VNOM="-"; CH13_NET="NC"
CH14_VNOM="1.8"; CH14_NET="P1V8_DVDDIO_1"
CH15_VNOM="0.75"; CH15_NET="P0V75_DVDD_7"
src/Script_ABC_Blanton/Blanton_Script/LTC2980_Margin_Script/settings/Blanton_SWB1_CONN15.conf
+52 -52
View File
@@ -1,52 +1,52 @@
# Blanton Channel Settings
# Format: CH<n>_VNOM=voltage CH<n>_NET=net_name
#
# Channel numbering (Script Channel, per Blanton_Margin_List):
# ch_global / 8 -> CHIPS index (0~17)
# ch_global % 8 -> page within LTC2977 (0~7)
# One LTC2980 = two LTC2977 (8ch each), controlled via 2 I2C addresses.
# --- SWB transport (added): this LTC2980 sits behind the CB FPGA F3 I2C; reach
# it with cb_pmbus, not i2cset. CB_I2C_CH = FPGA I2C channel for this CONN. ---
TRANSPORT="swb"
CB_I2C_CH=9 # CB F3 Ch9 = SWB1 CONN15/CONN16 (shared with CONN16, addr must differ)
# --- I2C Configuration ---
# Format: "bus:address" (8 channels per entry / per LTC2977)
CHIPS=(
# chip1: SWB1 (CONN15)
"1:0x62" # CH0 ~ CH7
"1:0x63" # CH8 ~ CH15
)
# Pre-commands to run before accessing each chip (empty = none)
# Multiple commands separated by ;
CHIP_PRE_CMD=(
"" # SWB1 CONN15 (lo)
)
# Post-commands to run after accessing each chip (optional, empty = none)
CHIP_POST_CMD=(
"" # SWB1 CONN15 (lo)
)
# ============================================================
# chip1: SWB1 (CONN15)
# ============================================================
CH0_VNOM="1.5"; CH0_NET="P1V5_AVDD_55"
CH1_VNOM="0.9"; CH1_NET="P0V9_AVDD_55"
CH2_VNOM="0.75"; CH2_NET="P0V75_DVDD_63"
CH3_VNOM="0.75"; CH3_NET="P0V75_AVDD_63"
CH4_VNOM="1.5"; CH4_NET="P1V5_AVDD_63"
CH5_VNOM="0.9"; CH5_NET="P0V9_AVDD_63"
CH6_VNOM="3.3"; CH6_NET="PVDD3_3V_SYNTH_LDO_B3"
CH7_VNOM="1.5"; CH7_NET="PVDD1V5_3"
CH8_VNOM="0.85"; CH8_NET="P0V85_STBY"
CH9_VNOM="1.8"; CH9_NET="P1V8_STBY"
CH10_VNOM="-"; CH10_NET="NC"
CH11_VNOM="3.3"; CH11_NET="P3V3_STBY"
CH12_VNOM="0.9"; CH12_NET="PVDD0V9_2"
CH13_VNOM="0.75"; CH13_NET="P0V75_DVDD_55"
CH14_VNOM="0.75"; CH14_NET="P0V75_AVDD_55"
CH15_VNOM="1.8"; CH15_NET="P1V8_DVDDIO_4"
# Blanton Channel Settings
# Format: CH<n>_VNOM=voltage CH<n>_NET=net_name
#
# Channel numbering (Script Channel, per Blanton_Margin_List):
# ch_global / 8 -> CHIPS index (0~17)
# ch_global % 8 -> page within LTC2977 (0~7)
# One LTC2980 = two LTC2977 (8ch each), controlled via 2 I2C addresses.
# --- SWB transport (added): this LTC2980 sits behind the CB FPGA F3 I2C; reach
# it with cb_pmbus, not i2cset. CB_I2C_CH = FPGA I2C channel for this CONN. ---
TRANSPORT="swb"
CB_I2C_CH=9 # CB F3 Ch9 = SWB1 CONN13/CONN15 (shared with CONN13, addr must differ)
# --- I2C Configuration ---
# Format: "bus:address" (8 channels per entry / per LTC2977)
CHIPS=(
# chip1: SWB1 (CONN15)
"1:0x62" # CH0 ~ CH7
"1:0x64" # CH8 ~ CH15
)
# Pre-commands to run before accessing each chip (empty = none)
# Multiple commands separated by ;
CHIP_PRE_CMD=(
"" # SWB1 CONN15 (lo)
)
# Post-commands to run after accessing each chip (optional, empty = none)
CHIP_POST_CMD=(
"" # SWB1 CONN15 (lo)
)
# ============================================================
# chip1: SWB1 (CONN15)
# ============================================================
CH0_VNOM="1.524"; CH0_NET="P1V5_AVDD_55"
CH1_VNOM="0.915"; CH1_NET="P0V9_AVDD_55"
CH2_VNOM="0.75"; CH2_NET="P0V75_DVDD_63"
CH3_VNOM="0.756"; CH3_NET="P0V75_AVDD_63"
CH4_VNOM="1.524"; CH4_NET="P1V5_AVDD_63"
CH5_VNOM="0.915"; CH5_NET="P0V9_AVDD_63"
CH6_VNOM="3.38"; CH6_NET="PVDD3_3V_SYNTH_LDO_B3"
CH7_VNOM="1.5"; CH7_NET="PVDD1V5_3"
CH8_VNOM="0.85"; CH8_NET="P0V85_STBY"
CH9_VNOM="1.8"; CH9_NET="P1V8_STBY"
CH10_VNOM="-"; CH10_NET="NC"
CH11_VNOM="3.3"; CH11_NET="P3V3_STBY"
CH12_VNOM="0.91"; CH12_NET="PVDD0V9_2"
CH13_VNOM="0.75"; CH13_NET="P0V75_DVDD_55"
CH14_VNOM="0.756"; CH14_NET="P0V75_AVDD_55"
CH15_VNOM="1.8"; CH15_NET="P1V8_DVDDIO_4"
src/Script_ABC_Blanton/Blanton_Script/LTC2980_Margin_Script/settings/Blanton_SWB1_CONN16.conf
+52 -52
View File
@@ -1,52 +1,52 @@
# Blanton Channel Settings
# Format: CH<n>_VNOM=voltage CH<n>_NET=net_name
#
# Channel numbering (Script Channel, per Blanton_Margin_List):
# ch_global / 8 -> CHIPS index (0~17)
# ch_global % 8 -> page within LTC2977 (0~7)
# One LTC2980 = two LTC2977 (8ch each), controlled via 2 I2C addresses.
# --- SWB transport (added): this LTC2980 sits behind the CB FPGA F3 I2C; reach
# it with cb_pmbus, not i2cset. CB_I2C_CH = FPGA I2C channel for this CONN. ---
TRANSPORT="swb"
CB_I2C_CH=9 # CB F3 Ch9 = SWB1 CONN15/CONN16 (shared with CONN15, addr must differ)
# --- I2C Configuration ---
# Format: "bus:address" (8 channels per entry / per LTC2977)
CHIPS=(
# chip1: SWB1 (CONN16)
"1:0x64" # CH0 ~ CH7
"1:0x65" # CH8 ~ CH15
)
# Pre-commands to run before accessing each chip (empty = none)
# Multiple commands separated by ;
CHIP_PRE_CMD=(
"" # SWB1 CONN16 (lo)
)
# Post-commands to run after accessing each chip (optional, empty = none)
CHIP_POST_CMD=(
"" # SWB1 CONN16 (lo)
)
# ============================================================
# chip1: SWB1 (CONN16)
# ============================================================
CH0_VNOM="1.5"; CH0_NET="PVDD1V5_0"
CH1_VNOM="1.8"; CH1_NET="P1V8_4"
CH2_VNOM="3.3"; CH2_NET="PVDD3_3V_SYNTH_LDO_B5"
CH3_VNOM="3.3"; CH3_NET="PVDD3_3V_SYNTH_LDO_A5"
CH4_VNOM="3.3"; CH4_NET="PVDD3_3V_SYNTH_LDO_B4"
CH5_VNOM="3.3"; CH5_NET="PVDD3_3V_SYNTH_LDO_A4"
CH6_VNOM="3.3"; CH6_NET="P3V3"
CH7_VNOM="0.8"; CH7_NET="PVDD0_8V_T3"
CH8_VNOM="0.75"; CH8_NET="P0V75_DVDD_1"
CH9_VNOM="0.75"; CH9_NET="P0V75_AVDD_1"
CH10_VNOM="1.5"; CH10_NET="P1V5_AVDD_1"
CH11_VNOM="0.9"; CH11_NET="P0V9_AVDD_1"
CH12_VNOM="0.9"; CH12_NET="PVDD0V9_0"
CH13_VNOM="0.9"; CH13_NET="PVDD0V9_1"
CH14_VNOM="0.9"; CH14_NET="PVDD0V9_3"
CH15_VNOM="1.2"; CH15_NET="PVDD1V2_T3"
# Blanton Channel Settings
# Format: CH<n>_VNOM=voltage CH<n>_NET=net_name
#
# Channel numbering (Script Channel, per Blanton_Margin_List):
# ch_global / 8 -> CHIPS index (0~17)
# ch_global % 8 -> page within LTC2977 (0~7)
# One LTC2980 = two LTC2977 (8ch each), controlled via 2 I2C addresses.
# --- SWB transport (added): this LTC2980 sits behind the CB FPGA F3 I2C; reach
# it with cb_pmbus, not i2cset. CB_I2C_CH = FPGA I2C channel for this CONN. ---
TRANSPORT="swb"
CB_I2C_CH=7 # CB F3 Ch7 = SWB1 CONN14/CONN16 (shared with CONN14, addr must differ)
# --- I2C Configuration ---
# Format: "bus:address" (8 channels per entry / per LTC2977)
CHIPS=(
# chip1: SWB1 (CONN16)
"1:0x62" # CH0 ~ CH7
"1:0x64" # CH8 ~ CH15
)
# Pre-commands to run before accessing each chip (empty = none)
# Multiple commands separated by ;
CHIP_PRE_CMD=(
"" # SWB1 CONN16 (lo)
)
# Post-commands to run after accessing each chip (optional, empty = none)
CHIP_POST_CMD=(
"" # SWB1 CONN16 (lo)
)
# ============================================================
# chip1: SWB1 (CONN16)
# ============================================================
CH0_VNOM="1.5"; CH0_NET="PVDD1V5_0"
CH1_VNOM="1.816"; CH1_NET="P1V8_4"
CH2_VNOM="3.38"; CH2_NET="PVDD3_3V_SYNTH_LDO_B5"
CH3_VNOM="3.38"; CH3_NET="PVDD3_3V_SYNTH_LDO_A5"
CH4_VNOM="3.38"; CH4_NET="PVDD3_3V_SYNTH_LDO_B4"
CH5_VNOM="3.38"; CH5_NET="PVDD3_3V_SYNTH_LDO_A4"
CH6_VNOM="3.327"; CH6_NET="P3V3"
CH7_VNOM="0.82"; CH7_NET="PVDD0_8V_T3"
CH8_VNOM="0.75"; CH8_NET="P0V75_DVDD_1"
CH9_VNOM="0.756"; CH9_NET="P0V75_AVDD_1"
CH10_VNOM="1.524"; CH10_NET="P1V5_AVDD_1"
CH11_VNOM="0.915"; CH11_NET="P0V9_AVDD_1"
CH12_VNOM="0.915"; CH12_NET="PVDD0V9_0"
CH13_VNOM="0.91"; CH13_NET="PVDD0V9_1"
CH14_VNOM="0.915"; CH14_NET="PVDD0V9_3"
CH15_VNOM="1.224"; CH15_NET="PVDD1V2_T3"
src/Script_ABC_Blanton/Blanton_Script/TH6_SWB0_power_readback.sh
+95
View File
@@ -0,0 +1,95 @@
#!/bin/bash
# =============================================================================
# TH6_SWB0_power_readback.sh -- SWB0 rail power from the platform sensors
# =============================================================================
# Version History:
# V1.1.0 2026-08-28 'show platform voltage' and 'show platform current' are
# now read ONCE each instead of once per rail. The old
# loop ran them 19 times apiece (38 invocations of a slow
# Python CLI) and every sample came from a different
# instant, so the rails were never actually measured
# together. Output format is unchanged.
# Rails missing from the tables are reported on stderr
# instead of silently contributing 0.000 V / 0.00 W.
# V1.0.0 2026-08-28 First version.
# =============================================================================
#
# Reads the two platform sensor tables:
# 'show platform voltage' -> <RAIL> in mV
# 'show platform current' -> <RAIL>_CURRENT in mA
# and reports V x I per rail plus the total.
#
# For a loaded reading, start traffic first: blanton_tr518.sh start
# =============================================================================
# --- Rails to report, in output order (edit this list) ---
rails=(
"SWB0_0V9_ANLG0"
"SWB0_0V9_ANLG1"
"SWB0_0V75_ANLG0"
"SWB0_0V75_ANLG1"
"SWB0_PHYTILE_P0"
"SWB0_PHYTILE_P1"
"SWB0_PHYTILE_P2"
"SWB0_PHYTILE_P3"
"SWB0_PHYTILE_P4"
"SWB0_PHYTILE_P5"
"SWB0_PHYTILE_P6"
"SWB0_PHYTILE_P7"
"SWB0_PVDD1V5_CNDR0"
"SWB0_PVDD1V5_CNDR1"
"SWB0_PVDDA_PHYT0"
"SWB0_PVDDA_PHYT1"
"SWB0_PVDDA_PHYT2"
"SWB0_PVDDA_PHYT3"
"SWB0_TH6_CORE"
)
# --- One snapshot of each table ---------------------------------------------
# Both are taken up front, back to back, so every rail below comes from the same
# moment. Under tr 518 the currents move a lot; re-reading per rail meant the
# total was a sum of readings taken seconds apart.
V_TABLE="$(show platform voltage 2>/dev/null)"
C_TABLE="$(show platform current 2>/dev/null)"
if [ -z "$V_TABLE" ] || [ -z "$C_TABLE" ]; then
echo "ERROR: 'show platform voltage/current' returned nothing" >&2
exit 1
fi
# --- Join and report ---------------------------------------------------------
# Sensor name is field 1 and the value field 2 in both tables; header and rule
# lines drop out because their field 2 is not numeric.
{
printf '%s\n' "$V_TABLE"
echo "@@@SPLIT@@@"
printf '%s\n' "$C_TABLE"
} | awk -v rails="${rails[*]}" '
BEGIN { n = split(rails, R, " "); sec = 1 }
/^@@@SPLIT@@@$/ { sec = 2; next }
{
if (NF < 2) next
name = $1; val = $2
if (val !~ /^[0-9]+(\.[0-9]+)?$/) next # header / ---- / blank
if (sec == 2) CUR[name] = val + 0
else VOLT[name] = val + 0
}
END {
total = 0
for (i = 1; i <= n; i++) {
rail = R[i]; cname = rail "_CURRENT"
haveV = (rail in VOLT); haveC = (cname in CUR)
if (!haveV || !haveC)
printf "WARN: %s missing from the sensor table (%s%s%s) -- counted as 0 W\n", \
rail, (haveV ? "" : "no voltage"), \
((!haveV && !haveC) ? ", " : ""), \
(haveC ? "" : "no current") > "/dev/stderr"
v = haveV ? VOLT[rail] : 0
c = haveC ? CUR[cname] : 0
p = sprintf("%.2f", (v/1000)*(c/1000))
printf "%s: Voltage=%.3f V, Current=%.3f A, Power=%.2f W\n", rail, v/1000, c/1000, p
total = sprintf("%.2f", total + p)
}
print "----------------------------------------"
printf "TOTAL POWER: %.2f W\n", total
}'
src/Script_ABC_Blanton/Blanton_Script/TH6_SWB1_power_readback.sh
+95
View File
@@ -0,0 +1,95 @@
#!/bin/bash
# =============================================================================
# TH6_SWB1_power_readback.sh -- SWB1 rail power from the platform sensors
# =============================================================================
# Version History:
# V1.1.0 2026-08-28 'show platform voltage' and 'show platform current' are
# now read ONCE each instead of once per rail. The old
# loop ran them 19 times apiece (38 invocations of a slow
# Python CLI) and every sample came from a different
# instant, so the rails were never actually measured
# together. Output format is unchanged.
# Rails missing from the tables are reported on stderr
# instead of silently contributing 0.000 V / 0.00 W.
# V1.0.0 2026-08-28 First version.
# =============================================================================
#
# Reads the two platform sensor tables:
# 'show platform voltage' -> <RAIL> in mV
# 'show platform current' -> <RAIL>_CURRENT in mA
# and reports V x I per rail plus the total.
#
# For a loaded reading, start traffic first: blanton_tr518.sh start
# =============================================================================
# --- Rails to report, in output order (edit this list) ---
rails=(
"SWB1_0V9_ANLG0"
"SWB1_0V9_ANLG1"
"SWB1_0V75_ANLG0"
"SWB1_0V75_ANLG1"
"SWB1_PHYTILE_P0"
"SWB1_PHYTILE_P1"
"SWB1_PHYTILE_P2"
"SWB1_PHYTILE_P3"
"SWB1_PHYTILE_P4"
"SWB1_PHYTILE_P5"
"SWB1_PHYTILE_P6"
"SWB1_PHYTILE_P7"
"SWB1_PVDD1V5_CNDR0"
"SWB1_PVDD1V5_CNDR1"
"SWB1_PVDDA_PHYT0"
"SWB1_PVDDA_PHYT1"
"SWB1_PVDDA_PHYT2"
"SWB1_PVDDA_PHYT3"
"SWB1_TH6_CORE"
)
# --- One snapshot of each table ---------------------------------------------
# Both are taken up front, back to back, so every rail below comes from the same
# moment. Under tr 518 the currents move a lot; re-reading per rail meant the
# total was a sum of readings taken seconds apart.
V_TABLE="$(show platform voltage 2>/dev/null)"
C_TABLE="$(show platform current 2>/dev/null)"
if [ -z "$V_TABLE" ] || [ -z "$C_TABLE" ]; then
echo "ERROR: 'show platform voltage/current' returned nothing" >&2
exit 1
fi
# --- Join and report ---------------------------------------------------------
# Sensor name is field 1 and the value field 2 in both tables; header and rule
# lines drop out because their field 2 is not numeric.
{
printf '%s\n' "$V_TABLE"
echo "@@@SPLIT@@@"
printf '%s\n' "$C_TABLE"
} | awk -v rails="${rails[*]}" '
BEGIN { n = split(rails, R, " "); sec = 1 }
/^@@@SPLIT@@@$/ { sec = 2; next }
{
if (NF < 2) next
name = $1; val = $2
if (val !~ /^[0-9]+(\.[0-9]+)?$/) next # header / ---- / blank
if (sec == 2) CUR[name] = val + 0
else VOLT[name] = val + 0
}
END {
total = 0
for (i = 1; i <= n; i++) {
rail = R[i]; cname = rail "_CURRENT"
haveV = (rail in VOLT); haveC = (cname in CUR)
if (!haveV || !haveC)
printf "WARN: %s missing from the sensor table (%s%s%s) -- counted as 0 W\n", \
rail, (haveV ? "" : "no voltage"), \
((!haveV && !haveC) ? ", " : ""), \
(haveC ? "" : "no current") > "/dev/stderr"
v = haveV ? VOLT[rail] : 0
c = haveC ? CUR[cname] : 0
p = sprintf("%.2f", (v/1000)*(c/1000))
printf "%s: Voltage=%.3f V, Current=%.3f A, Power=%.2f W\n", rail, v/1000, c/1000, p
total = sprintf("%.2f", total + p)
}
print "----------------------------------------"
printf "TOTAL POWER: %.2f W\n", total
}'
src/Script_ABC_Blanton/Blanton_Script/bcm_dsc_parse.sh
+204
View File
@@ -0,0 +1,204 @@
#!/bin/sh
# =============================================================================
# bcm_dsc_parse_V1.0.0.sh
#
# Author : ETWen
# Date : 20260906
#
# Version History
# V1.0.0 20260906 Initial Version
#
# Description:
# Parse Broadcom diag shell "phydiag <pm_id> dsc" raw log into CSV.
# 支援多個 pm_id 串接在同一份 log,以 "pm_id =" 當 record separator。
#
# Output:
# <prefix>_lane.csv : 每個 lane 一列(TXEQ / RXFFE / DFE / EYE / SNR ...)
# <prefix>_pm.csv : 每個 pm_id 一列(溫度 / PLL / lane 數 / SNR-EYE 統計)
#
# Usage:
# ./bcm_dsc_parse_V1.0.0.sh -i dsc_raw.log [-o out_prefix]
#
# Design notes:
# - 純 POSIX sh + awk(mawk 相容),不依賴 Python。
# - Lane row 採「括號群組出現順序」抽取,而非固定欄位位置,對排版空白
# 變動免疫。SDK 若增減欄位,群組數不等於 9,該列會被標記 UNPARSED
# 並輸出到 stderr,不會靜默解析錯誤。
# - 已知 header 名稱數與資料欄數不一致之處:
# * (P RX, CDRxN, UC_CFG, UC_STS, RST, STP) 6 個名字 / 7 個值
# (RST 實際是 "0,0" 兩欄)
# * TXEQ 尾端多一個逗號
# * AVG_TMON 顯示為 "(11) 66C" 兩個 token
# - SD / LCK 的 "*" 為 sticky 旗標,本版拆成獨立欄位保留,不做判讀。
# - BER 欄若為 "!chk_en" 表示 checker 未開啟,值無效,原樣保留。
# =============================================================================
set -e
IN=""
PREFIX="dsc"
usage() {
echo "Usage: $0 -i <raw_log> [-o <out_prefix>]" >&2
exit 1
}
while getopts "i:o:h" opt; do
case "$opt" in
i) IN="$OPTARG" ;;
o) PREFIX="$OPTARG" ;;
*) usage ;;
esac
done
[ -n "$IN" ] || usage
[ -f "$IN" ] || { echo "ERROR: input not found: $IN" >&2; exit 2; }
LANE_CSV="${PREFIX}_lane.csv"
PM_CSV="${PREFIX}_pm.csv"
# 先去掉 CR(console / telnet log 常帶),再交給 awk
tr -d '\r' < "$IN" | awk -v LANE_CSV="$LANE_CSV" -v PM_CSV="$PM_CSV" '
function trim(s) { sub(/^[ \t]+/, "", s); sub(/[ \t]+$/, "", s); return s }
# 掃描一列,取出所有頂層括號群組到 G[],群組前的英數 prefix 到 P[],
# 其餘純量文字留在 REST。回傳群組數。
function split_groups(line, i, ch, d, buf, ng, rest, prefix) {
split("", G, ":"); split("", P, ":")
ng = 0; d = 0; buf = ""; rest = ""; prefix = ""
for (i = 1; i <= length(line); i++) {
ch = substr(line, i, 1)
if (ch == "(") {
d++
if (d == 1) {
buf = ""; prefix = ""
if (match(rest, /[A-Za-z_]+$/)) {
prefix = substr(rest, RSTART, RLENGTH)
rest = substr(rest, 1, RSTART - 1)
}
continue
}
}
if (ch == ")") {
d--
if (d == 0) { ng++; G[ng] = buf; P[ng] = prefix; rest = rest " "; continue }
}
if (d > 0) { buf = buf ch; continue }
rest = rest ch
}
REST = rest
return ng
}
# 取括號群組的第 n 個子欄位(以逗號分隔)
function gf(idx, n, a, c) {
c = split(G[idx], a, ",")
if (n > c) return ""
return trim(a[n])
}
function is_num(s) { return (s ~ /^[+-]?[0-9]+(\.[0-9]+)?$/) }
function reset_pm() {
core = ""; sdtype = ""; hw_lanes = ""; lane_sel = ""
live_temp = ""; avg_tmon = ""; pll_lock = ""
n_lane = 0; snr_min = ""; snr_max = ""; eye_min = ""; all_lck = 1
}
function flush_pm() {
if (pm == "") return
printf "%s,%s,%s,%s,%s,%s,%s,%s,%s,%s,%s,%s\n",
pm, core, sdtype, hw_lanes, lane_sel, n_lane,
live_temp, avg_tmon, pll_lock,
(snr_min == "" ? "NA" : snr_min),
(eye_min == "" ? "NA" : eye_min),
(n_lane == 0 ? "NA" : (all_lck ? "PASS" : "FAIL")) > PM_CSV
}
BEGIN {
pm = ""; in_lane = 0; core_row = 0; bad = 0
print "pm_id,core,lane,serdes_type,sd,sd_sticky,lck,lck_sticky,rxppm,txppm," \
"txeq_n3,txeq_n2,txeq_n1,txeq_m,txeq_p1,txeq_p2,txeq_sum," \
"rxffe_n3,rxffe_n2,rxffe_n1,rxffe_m,rxffe_p1,rxffe_p2," \
"dfe1,dfe2,pf_m,pf_l,pf_h,vga,dco,tp0,tp1,tp2,flt_m,flt_s," \
"nlc_u,nlc_l,eye_u,eye_m,eye_l,link_time,snr,ber," \
"live_temp,avg_tmon,pll_lock,rx_pol,cdr,uc_cfg,uc_sts,rst,stp" > LANE_CSV
print "pm_id,core,serdes_type,hw_lanes,lane_select,active_lanes," \
"live_temp,avg_tmon,pll_lock,snr_min,eye_min,lck_all" > PM_CSV
}
/^pm_id[ \t]*=/ { flush_pm(); pm = $NF; reset_pm(); in_lane = 0; next }
/^Core[ \t]*=/ { if (match($0, /Core[ \t]*=[ \t]*[0-9]+/)) { core = $0; sub(/.*Core[ \t]*=[ \t]*/, "", core); sub(/[^0-9].*/, "", core) } next }
/^SerDes type[ \t]*=/ { sdtype = $NF; next }
/^Rev ID # Lanes/ { hw_lanes = $NF; next }
/^lane_select[ \t]*=/ { lane_sel = $NF; next }
/^CORE[ \t]+RST_ST/ { core_row = 1; next }
core_row == 1 {
line = $0
gsub(/\([^)]*\)[ \t]*/, "", line) # 去掉 AVG_TMON 的 "(11)"
n = split(trim(line), c, /[ \t]+/)
if (n >= 15) { live_temp = c[9]; avg_tmon = c[10]; pll_lock = c[15] }
core_row = 0
next
}
/^LN[ \t]*\(/ { in_lane = 1; next }
/SERDES DISPLAY DIAG DATA END/ { in_lane = 0; next }
in_lane && /^[0-9]+[ \t]*\(/ {
ng = split_groups($0)
if (ng != 9) {
printf "UNPARSED (groups=%d) pm_id=%s: %s\n", ng, pm, $0 > "/dev/stderr"
bad++
next
}
nr = split(trim(REST), r, /[ \t]+/)
if (nr != 10) {
printf "UNPARSED (scalars=%d) pm_id=%s: %s\n", nr, pm, $0 > "/dev/stderr"
bad++
next
}
lane = r[1]
sd = r[2]; sd_st = (sd ~ /\*/) ? 1 : 0; gsub(/\*/, "", sd)
lck = r[3]; lck_st = (lck ~ /\*/) ? 1 : 0; gsub(/\*/, "", lck)
rxppm = r[4]; vga = r[5]; dco = r[6]; txppm = r[7]
link_time = r[8]; snr = r[9]; ber = r[10]
# TXEQ 六個 tap 與總和(僅在全為數值時計算)
tsum = 0; tok = 1
for (i = 1; i <= 6; i++) {
tq[i] = gf(7, i)
if (is_num(tq[i])) tsum += tq[i]; else tok = 0
}
printf "%s,%s,%s,%s,%s,%s,%s,%s,%s,%s,", pm, core, lane, sdtype, sd, sd_st, lck, lck_st, rxppm, txppm > LANE_CSV
printf "%s,%s,%s,%s,%s,%s,%s,", tq[1], tq[2], tq[3], tq[4], tq[5], tq[6], (tok ? tsum : "NA") > LANE_CSV
printf "%s,%s,%s,%s,%s,%s,", gf(4,1), gf(4,2), gf(4,3), gf(4,4), gf(4,5), gf(4,6) > LANE_CSV
printf "%s,%s,", gf(5,1), gf(5,2) > LANE_CSV
printf "%s,%s,%s,%s,%s,", gf(2,1), gf(2,2), gf(2,3), vga, dco > LANE_CSV
printf "%s,%s,%s,%s,%s,", gf(3,1), gf(3,2), gf(3,3), gf(6,1), gf(6,2) > LANE_CSV
printf "%s,%s,%s,%s,%s,", gf(8,1), gf(8,2), gf(9,1), gf(9,2), gf(9,3) > LANE_CSV
printf "%s,%s,%s,", link_time, snr, ber > LANE_CSV
printf "%s,%s,%s,", live_temp, avg_tmon, pll_lock > LANE_CSV
printf "%s,%s,%s,%s,%s/%s,%s\n", gf(1,1), gf(1,2), gf(1,3), gf(1,4), gf(1,5), gf(1,6), gf(1,7) > LANE_CSV
# per-PM 統計
n_lane++
if (lck != "1" || sd != "1") all_lck = 0
if (is_num(snr)) { if (snr_min == "" || snr + 0 < snr_min + 0) snr_min = snr }
for (i = 1; i <= 3; i++) {
e = gf(9, i)
if (is_num(e)) { if (eye_min == "" || e + 0 < eye_min + 0) eye_min = e }
}
next
}
END {
flush_pm()
if (bad > 0) printf "WARN: %d lane row(s) unparsed\n", bad > "/dev/stderr"
}
'
echo "OK: ${LANE_CSV}, ${PM_CSV}"
src/Script_ABC_Blanton/Blanton_Script/bcm_dsc_scan.sh
+347
View File
@@ -0,0 +1,347 @@
#!/bin/sh
# =============================================================================
# bcm_dsc_scan.sh
#
# Author : ETWen
# Date : 20260906
#
# Version History
# V1.0.0 20260906 Initial Version
# V1.1.0 20260906 Log 預設輸出至 <script_dir>/log,掃描後自動複製到
# /host/hw-eval/jobs/;非 tty 環境改用逐行進度輸出,
# 避免灌爆 Tera Term logopen 的 log
# V1.2.0 20260906 新增 -f 自訂 log 檔名(支援 %u / %t 佔位符)與
# -F 強制覆蓋;預設不覆蓋既有檔案,自動加序號
# V1.3.0 20260907 修正 bcmcmd 讀取 stdin 導致掃描迴圈在第一筆之後
# 提前結束的問題(迴圈改用 fd 3,bcmcmd 導向
# /dev/null);新增實際迭代筆數與清單筆數的檢查
#
# Description:
# 在 Blanton SONiC DUT 上批次執行 Broadcom diag shell 的
# "phydiag <port> dsc",收集 raw log 供離線解析。
#
# 實際下的指令為:
# bcmcmd -n <unit> -c "dsh -c 'phydiag <port> dsc'"
#
# Deployment:
# Script : /root/Blanton_Script/bcm_dsc_scan.sh
# Log : /root/Blanton_Script/log/dsc_raw_u<unit>_<YYYYmmdd_HHMMSS>.log
# Copy : /host/hw-eval/jobs/
#
# Log 檔名可用 -f 覆寫,支援兩個佔位符:
# %u -> u0 / u1
# %t -> YYYYmmdd_HHMMSS
# -f 只接受檔名,不接受路徑;目錄一律由 -o 決定。
# 同時掃兩個 unit 但檔名未含 %u 時,會自動在副檔名前插入 _u<unit>,
# 避免第二個 unit 覆蓋掉第一個。
#
# 路徑由 $0 推導,不依賴 $HOME。Script A 以 sudo -i 執行時 ~ 為 /root,
# 直接寫死 ~ 會有風險,故一律使用絕對路徑。
#
# Usage:
# ./bcm_dsc_scan.sh # unit 0 與 1 都掃,掃完自動複製
# ./bcm_dsc_scan.sh -u 0 # 只掃 unit 0
# ./bcm_dsc_scan.sh -n # dry-run,只列出要掃的 port
# ./bcm_dsc_scan.sh -C # 不複製到 /host/hw-eval/jobs
# ./bcm_dsc_scan.sh -c /other/dir # 指定複製目的地
# ./bcm_dsc_scan.sh -u 0 -f dsc_before_reboot.log
# ./bcm_dsc_scan.sh -f blanton_dsc_%u_%t.log
#
# Exit code:
# 0 = 全部 port 皆取得完整 dump
# 1 = 有 port 未取得完整 dump,或複製失敗
# 2 = 參數 / 路徑錯誤
# 3 = 找不到 bcmcmd
#
# 結束時固定輸出一行 "### DSC_SCAN_DONE rc=<n>",供 TTL 端 wait 判斷。
#
# Design notes:
# - 純 POSIX sh,不依賴 bash / Python。
# - Port 清單以「範圍字串」定義在下方 PORTS_* 變數,展開後去重。
# 100G 清單先展開,故重複的 port 會被判定為 100G(目前僅 port 268)。
# - bcmcmd 即使指令失敗通常仍回傳 0,因此不以 exit code 判斷成功與否;
# 改由 marker 行 + "SERDES DISPLAY DIAG DATA END" 數量比對。
# - 先寫入本機 log 目錄再複製,而非直接寫遠端,避免中途失敗遺失整份資料。
#
# Assumptions:
# - unit 0 與 unit 1 使用相同的 port 清單。
# - phydiag 的參數為此清單中的 port 編號(非 port name)。
# - 由 root 執行(Script A 的 sudo -i 之後),故不呼叫 sudo。
#
# Cautions:
# - 全清單約 445 port x 2 unit,估計 10 分鐘,請勿把 DELAY 設為 0。
# - phydiag ... dsc 為唯讀操作,不會變更 SerDes 設定。
# =============================================================================
set -u
# ----------------------------------------------------------------------------
# Port list (以空白分隔的範圍或單一值)
# ----------------------------------------------------------------------------
PORTS_100G="268"
PORTS_200G="1-24 40-96 112-168 184-240 256-308 310-327 342-380 382-399 414-452 454-471 486-524 526-543 558-565"
# ----------------------------------------------------------------------------
# Paths / defaults
# ----------------------------------------------------------------------------
SCRIPT_DIR=$(CDPATH= cd -- "$(dirname -- "$0")" && pwd) || exit 2
UNITS="0 1"
OUTDIR="${SCRIPT_DIR}/log"
COPYDIR="/host/hw-eval/jobs"
DELAY="0.2"
DRYRUN=0
DOCOPY=1
LOGNAME="" # -f 指定的 log 檔名,空字串表示使用預設命名
FORCE=0 # -F 允許覆蓋既有檔案
PROGRESS_EVERY=50 # 非 tty 環境每 N 筆印一行進度
usage() {
cat >&2 << 'USAGE'
Usage: bcm_dsc_scan.sh [-u <0|1>] [-o <outdir>] [-f <logname>] [-F]
[-c <copydir>] [-C] [-d <sec>] [-n] [-h]
-u <unit> 只掃指定 unit。省略則 unit 0 與 1 都掃。
-o <dir> log 輸出目錄 (default: <script_dir>/log)
-f <name> 自訂 log 檔名(僅檔名,不含路徑)
佔位符: %u -> u0/u1 , %t -> YYYYmmdd_HHMMSS
default: dsc_raw_%u_%t.log
-F 允許覆蓋既有同名檔案 (default: 自動加序號 _1 / _2 ...)
-c <dir> 掃描後複製目的地 (default: /host/hw-eval/jobs)
-C 不複製
-d <sec> 每筆 phydiag 之間的間隔 (default: 0.2)
-n dry-run,列出展開後的 port 清單與指令,不實際執行
-h 顯示此說明
USAGE
exit 1
}
while getopts "u:o:f:Fc:Cd:nh" opt; do
case "$opt" in
u)
case "$OPTARG" in
0|1) UNITS="$OPTARG" ;;
*) echo "ERROR: -u 只接受 0 或 1 (got: $OPTARG)" >&2; exit 2 ;;
esac
;;
o) OUTDIR="$OPTARG" ;;
f)
case "$OPTARG" in
"") echo "ERROR: -f 不可為空" >&2; exit 2 ;;
*/*) echo "ERROR: -f 只接受檔名,路徑請用 -o (got: $OPTARG)" >&2; exit 2 ;;
*) LOGNAME="$OPTARG" ;;
esac
;;
F) FORCE=1 ;;
c) COPYDIR="$OPTARG" ;;
C) DOCOPY=0 ;;
d) DELAY="$OPTARG" ;;
n) DRYRUN=1 ;;
*) usage ;;
esac
done
mkdir -p "$OUTDIR" 2>/dev/null || { echo "ERROR: cannot create outdir: $OUTDIR" >&2; exit 2; }
[ -w "$OUTDIR" ] || { echo "ERROR: outdir not writable: $OUTDIR" >&2; exit 2; }
# ----------------------------------------------------------------------------
# sleep 是否支援小數秒(busybox sleep 可能只吃整數)
# ----------------------------------------------------------------------------
if ! sleep "$DELAY" 2>/dev/null; then
echo "WARN: sleep '$DELAY' 不支援,改用 sleep 1" >&2
DELAY="1"
fi
# ----------------------------------------------------------------------------
# 展開 port 清單。100G 先展開,重複者以 100G 為準。
# 輸出格式: "<port>,<speed>",依 port 數值排序。
# ----------------------------------------------------------------------------
PORTFILE=$(mktemp) || { echo "ERROR: mktemp failed" >&2; exit 2; }
trap 'rm -f "$PORTFILE"' EXIT
trap 'echo "" >&2; echo "### DSC_SCAN_DONE rc=130 (INTERRUPTED)" >&2; rm -f "$PORTFILE"; exit 130' INT TERM
awk -v a="$PORTS_100G" -v b="$PORTS_200G" '
function expand(s, spd, n, i, j, p, k, lo, hi) {
n = split(s, p, /[ \t]+/)
for (i = 1; i <= n; i++) {
if (p[i] == "") continue
if (split(p[i], k, "-") == 2) { lo = k[1] + 0; hi = k[2] + 0 }
else { lo = p[i] + 0; hi = lo }
if (hi < lo) { printf "ERROR: bad range %s\n", p[i] > "/dev/stderr"; continue }
for (j = lo; j <= hi; j++) if (!(j in SPD)) SPD[j] = spd
}
}
BEGIN {
expand(a, "100G") # 先展開 100G,重複的 port 由 100G 取得
expand(b, "200G")
for (p in SPD) print p "," SPD[p]
}' | sort -t, -k1,1n > "$PORTFILE"
TOTAL=$(wc -l < "$PORTFILE" | tr -d ' ')
[ "$TOTAL" -gt 0 ] || { echo "ERROR: port list is empty" >&2; exit 2; }
N100=$(grep -c ',100G$' "$PORTFILE" || true)
N200=$(grep -c ',200G$' "$PORTFILE" || true)
echo "Script dir : $SCRIPT_DIR" >&2
echo "Log dir : $OUTDIR" >&2
echo "Port list : $TOTAL ports (200G x2: $N200, 100G: $N100)" >&2
echo "Units : $UNITS" >&2
echo "Delay : ${DELAY}s" >&2
# ----------------------------------------------------------------------------
# Dry-run
# ----------------------------------------------------------------------------
if [ "$DRYRUN" -eq 1 ]; then
for U in $UNITS; do
echo "--- unit $U ---"
while IFS=, read -r P SPD; do
printf 'bcmcmd -n %s -c "dsh -c '\''phydiag %s dsc'\''" # %s\n' "$U" "$P" "$SPD"
done < "$PORTFILE"
done
echo "### DSC_SCAN_DONE rc=0 (dry-run)" >&2
exit 0
fi
command -v bcmcmd > /dev/null 2>&1 || {
echo "ERROR: bcmcmd not found in PATH" >&2
echo "### DSC_SCAN_DONE rc=3" >&2
exit 3
}
# stderr 是 tty 才用 \r 進度條;被導向檔案(Tera Term logopen)時改逐行輸出
if [ -t 2 ]; then TTY=1; else TTY=0; fi
# ----------------------------------------------------------------------------
# Log 檔名處理
# ----------------------------------------------------------------------------
# 純 POSIX 的字串取代,避免 sed 對檔名中的特殊字元誤判
replace_all() { # $1=haystack $2=needle $3=replacement
_s=$1; _n=$2; _r=$3; _out=""
while :; do
case "$_s" in
*"$_n"*)
_out="${_out}${_s%%"$_n"*}${_r}"
_s=${_s#*"$_n"}
;;
*) _out="${_out}${_s}"; break ;;
esac
done
printf '%s' "$_out"
}
# 依 unit 組出 log 檔名。未指定 -f 時使用預設命名。
build_logname() { # $1=unit
_u=$1
_n=${LOGNAME:-dsc_raw_%u_%t.log}
case "$_n" in *%u*) _has_u=1 ;; *) _has_u=0 ;; esac
_n=$(replace_all "$_n" '%u' "u${_u}")
_n=$(replace_all "$_n" '%t' "$TS")
# 掃兩個 unit 但檔名沒有 %u,第二個 unit 會覆蓋第一個,故自動加上 _u<unit>
if [ "$_has_u" -eq 0 ] && [ "$MULTI" -eq 1 ]; then
case "$_n" in
*.*) _n="${_n%.*}_u${_u}.${_n##*.}" ;;
*) _n="${_n}_u${_u}" ;;
esac
fi
printf '%s' "$_n"
}
# 檔案已存在時自動加序號,避免覆蓋掉先前的掃描結果(-F 可強制覆蓋)
uniquify() { # $1=filename
_f=$1
[ -e "${OUTDIR}/${_f}" ] || { printf '%s' "$_f"; return; }
if [ "$FORCE" -eq 1 ]; then
echo "WARN: 覆蓋既有檔案 ${OUTDIR}/${_f}" >&2
printf '%s' "$_f"; return
fi
case "$_f" in
*.*) _b=${_f%.*}; _e=".${_f##*.}" ;;
*) _b=$_f; _e="" ;;
esac
_i=1
while [ -e "${OUTDIR}/${_b}_${_i}${_e}" ]; do _i=$((_i + 1)); done
echo "WARN: ${_f} 已存在,改用 ${_b}_${_i}${_e}(-F 可強制覆蓋)" >&2
printf '%s' "${_b}_${_i}${_e}"
}
MULTI=0
[ "$(echo "$UNITS" | wc -w | tr -d ' ')" -gt 1 ] && MULTI=1
# ----------------------------------------------------------------------------
# Scan
# ----------------------------------------------------------------------------
TS=$(date +%Y%m%d_%H%M%S)
RC=0
LOGS=""
for U in $UNITS; do
LOG="${OUTDIR}/$(uniquify "$(build_logname "$U")")"
: > "$LOG" || { echo "ERROR: cannot write $LOG" >&2; exit 2; }
LOGS="$LOGS $LOG"
printf '### SCAN_BEGIN unit=%s time=%s total=%s script=bcm_dsc_scan_V1.3.0\n' \
"$U" "$(date '+%Y-%m-%d %H:%M:%S')" "$TOTAL" >> "$LOG"
echo "[unit $U] scanning $TOTAL ports -> $LOG" >&2
SEQ=0
while IFS=, read -r P SPD <&3; do
SEQ=$((SEQ + 1))
printf '### PORT unit=%s port=%s speed=%s seq=%s/%s\n' "$U" "$P" "$SPD" "$SEQ" "$TOTAL" >> "$LOG"
# bcmcmd 會讀取 stdin,若不導成 /dev/null 會把 PORTFILE 剩餘內容吸走,
# 導致迴圈在第一筆之後就讀到 EOF 而提前結束。
bcmcmd -n "$U" -c "dsh -c 'phydiag $P dsc'" >> "$LOG" 2>&1 < /dev/null || RC=1
if [ "$TTY" -eq 1 ]; then
printf '\r[unit %s] %s/%s port=%-5s' "$U" "$SEQ" "$TOTAL" "$P" >&2
elif [ $((SEQ % PROGRESS_EVERY)) -eq 0 ] || [ "$SEQ" -eq "$TOTAL" ]; then
printf '[unit %s] %s/%s port=%s\n' "$U" "$SEQ" "$TOTAL" "$P" >&2
fi
sleep "$DELAY"
done 3< "$PORTFILE"
[ "$TTY" -eq 1 ] && printf '\n' >&2
printf '### SCAN_END unit=%s time=%s\n' "$U" "$(date '+%Y-%m-%d %H:%M:%S')" >> "$LOG"
# 檢查 1:實際迭代筆數是否等於 port 清單筆數。
# 迴圈若因 stdin 被子程序吸走而提前結束,只靠下面的 marker/dump 比對抓不到。
if [ "$SEQ" -ne "$TOTAL" ]; then
echo "ERROR: unit $U 只跑了 $SEQ/$TOTAL 筆,迴圈提前結束" >&2
RC=1
fi
# 檢查 2:每筆 PORT marker 應對應一個 dsc 區塊
MARK=$(grep -c '^### PORT ' "$LOG" || true)
DUMP=$(grep -c 'SERDES DISPLAY DIAG DATA END' "$LOG" || true)
if [ "$MARK" -ne "$DUMP" ]; then
echo "WARN: unit $U markers=$MARK dsc_blocks=$DUMP (有 port 未取得完整 dump)" >&2
RC=1
fi
echo "Saved: $LOG (${DUMP}/${TOTAL} dumps)" >&2
done
# ----------------------------------------------------------------------------
# Copy to job directory
# ----------------------------------------------------------------------------
if [ "$DOCOPY" -eq 1 ]; then
if mkdir -p "$COPYDIR" 2>/dev/null && [ -w "$COPYDIR" ]; then
for L in $LOGS; do
if cp -p "$L" "$COPYDIR/"; then
echo "Copied: $COPYDIR/$(basename "$L")" >&2
else
echo "ERROR: copy failed: $L -> $COPYDIR" >&2
RC=1
fi
done
sync
else
echo "ERROR: copydir not writable: $COPYDIR (log 仍保留在 $OUTDIR)" >&2
RC=1
fi
fi
echo "### DSC_SCAN_DONE rc=${RC}" >&2
exit "$RC"
src/Script_ABC_Blanton/Blanton_Script/blanton_ber.sh
+495
View File
@@ -0,0 +1,495 @@
#!/usr/bin/env bash
# =============================================================================
# blanton_ber.sh -- SerDes BER test over every cabled port (PRBS via phydiag)
# =============================================================================
# Version History:
# V1.0.1 2026-08-28 Fix: every lane reported NA and the Port column showed
# "NA". bcmcmd returns CRLF, and the BER is the last token
# on its line, so the CR stayed glued to the number: it
# failed the numeric test (-> NA) and printing it sent the
# cursor back to column 1, so the RESULT column overwrote
# the start of the row. The parser now strips CR first.
# (The traffic report never hit this -- there the counter
# is followed by a delta, so the CR was trimmed with it.)
# V1.0.0 2026-08-28 First version. Bash port of tools/BER_Test.txt.
# init/clear/start/stop/report, -u 0|1|all (default both).
# report parses 'prbsstat Ber' into a per-lane table with a
# PASS/FAIL against BER_MAX (default 1e-6) and a summary
# across units at the very bottom.
# =============================================================================
#
# This is the WHOLE-SWITCH BER sweep: every cabled port, both lanes, PRBS-31
# through the SerDes. Not to be confused with port_prbs_monitor.sh, which drives
# the two 100G uplinks only and polls them continuously.
#
# Order of operations (matches tools/BER_Test.txt):
# init phydiag <ports> prbs set p=3 arm PRBS on every lane
# phydiag <ports> prbs get confirm every lane locked
# start phydiag <ports> prbsstat STArt Interval=<n>
# ...wait at least one Interval...
# report phydiag <ports> prbsstat Ber read + judge
# stop phydiag <ports> prbsstat STOp
# clear phydiag <ports> prbs clear disarm, release the lanes
#
# ⚠️ 'clear' disarms PRBS -- run 'init' again before another measurement.
# ⚠️ PRBS takes the SerDes out of normal operation: the links report DOWN and no
# traffic passes while it is armed. Do not run this alongside
# blanton_traffic_linespeed or blanton_tr518.
#
# Usage (run directly):
# ./blanton_ber.sh init # both units
# ./blanton_ber.sh start -u 0 # unit 0 only
# ./blanton_ber.sh report
# ./blanton_ber.sh stop
# ./blanton_ber.sh clear
#
# Usage (sourced, like the other blanton_*.sh tools):
# source blanton_ber.sh
# blanton_ber report -u 1
#
# Options:
# -u|--unit <0|1|all|0,1> bcmcmd unit(s). Default: $BER_UNITS ("0 1")
# -c|--criteria <ber> report: PASS threshold (default $BER_MAX)
# -i|--interval <sec> start: prbsstat Interval (default $BER_INTERVAL)
# -p|--ports <list> override the port list
# -F|--fail-only report: list only the lanes that FAIL
# --tsv report: tab-separated (paste into Excel)
# --raw report: also print the raw 'prbsstat Ber' output
# --color|--no-color report: force / disable colours
# -f|--file <log> report: parse a saved console log, do not touch DUT
# -d|--debug print every bcmcmd before running it
# -n|--dry-run print commands only, do not touch the DUT
# -h|--help help
#
# Environment overrides:
# BCMCMD_CMD=bcmcmd BER_UNITS="0 1" BER_MAX=1e-6 BER_INTERVAL=30
# BER_PORTS="1-24,..." BER_POLY=p=3 BER_LOG_DIR=/tmp DEBUG_MODE=1
# =============================================================================
# === Config ==================================================================
BCMCMD_CMD="${BCMCMD_CMD:-bcmcmd}"
BER_UNITS="${BER_UNITS:-0 1}" # one DUT = two switch boards (0 and 1)
# The cabled ports, in bcm logical-port numbering. Same list as
# blanton_traffic_linespeed.sh's TL_PS_PORTS -- kept as one string so it can be
# pasted straight from/into a manual phydiag command.
BER_PORTS="${BER_PORTS:-1-24,40-96,112-168,184-240,256-259,270-308,310-327,342-380,382-399,414-452,454-471,486-524,526-543,558-565}"
BER_POLY="${BER_POLY:-p=3}" # passed to 'prbs set'
BER_INTERVAL="${BER_INTERVAL:-30}" # passed to 'prbsstat STArt Interval='
# PASS threshold. A lane PASSES when its BER is strictly BELOW this.
# 1e-6 is the acceptance figure for this project; the measured lanes sit around
# 1e-13..1e-8, so anything near the threshold is already a real finding.
BER_MAX="${BER_MAX:-1e-6}"
BER_LOG_DIR="${BER_LOG_DIR:-/tmp}" # where the raw 'prbsstat Ber' capture goes
BER_FAIL_ONLY=${BER_FAIL_ONLY:-0}
BER_TSV=${BER_TSV:-0}
BER_RAW=${BER_RAW:-0}
BER_REPORT_FILE="" # -f <log>: parse this instead of the DUT
BER_COLOR="${BER_COLOR:-auto}" # auto|always|never
DEBUG_MODE=${DEBUG_MODE:-0}
BER_DRY_RUN=${BER_DRY_RUN:-0}
# === Logging =================================================================
_ber_info() { echo -e "[\033[34mINFO\033[0m] $*"; }
_ber_ok() { echo -e "[\033[32m OK \033[0m] $*"; }
_ber_warn() { echo -e "[\033[33mWARN\033[0m] $*" >&2; }
_ber_err() { echo -e "[\033[31mERR \033[0m] $*" >&2; }
_ber_dbg() { [ "$DEBUG_MODE" = "1" ] && echo -e "\033[90m[DEBG] $*\033[0m" >&2; return 0; }
# === bcmcmd wrapper ==========================================================
# stdin closed for the same reason as blanton_traffic_linespeed.sh: bcmcmd
# otherwise inherits the caller's stdin and eats what a surrounding loop reads.
#
# bcmcmd exits 0 even when the BCM shell refused the command, so the output is
# pattern-matched as well. And it exits NON-zero on long-running commands whose
# response poll times out while the command is in fact fine -- that one is
# tolerated (the blanton_tr518.sh lesson).
BER_ERR_PAT="${BER_ERR_PAT:-ERROR|Failed to execute|Invalid|Syntax error|Unavailable|Unknown command}"
BER_BENIGN_PAT="${BER_BENIGN_PAT:-polling socket timeout}"
# _ber_bcm <unit> <phydiag args...> -- wraps in dsh -c 'phydiag <ports> ...'
# echoes the DUT output on stdout, returns 0 ok / 1 failed
_ber_bcm() {
local unit="$1"; shift
local inner="phydiag ${BER_PORTS} $*"
local cmd="dsh -c '${inner}'"
_ber_dbg "$BCMCMD_CMD -n $unit -c \"${cmd}\""
if [ "$BER_DRY_RUN" = "1" ]; then
echo "[DRY ] $BCMCMD_CMD -n $unit -c \" ${cmd} \"" >&2
return 0
fi
local out rc
out=$("$BCMCMD_CMD" -n "$unit" -c "$cmd" </dev/null 2>&1); rc=$?
printf '%s\n' "$out"
if echo "$out" | grep -qiE "$BER_ERR_PAT"; then
_ber_err "unit $unit: the BCM shell rejected 'phydiag ... $*'"
return 1
fi
if [ "$rc" -ne 0 ] && ! echo "$out" | grep -qiE "$BER_BENIGN_PAT"; then
_ber_err "unit $unit: bcmcmd exited $rc on 'phydiag ... $*'"
return 1
fi
return 0
}
_ber_units_check() {
local u ok=""
for u in $BER_UNITS; do
case "$u" in
0|1) ok="$ok $u" ;;
*) _ber_err "invalid unit '$u' (use 0, 1 or all)"; return 1 ;;
esac
done
[ -n "$ok" ] || { _ber_err "no unit selected"; return 1; }
BER_UNITS="${ok# }"
return 0
}
_ber_use_color() {
case "$BER_COLOR" in
always|1|yes) return 0 ;;
never|0|no) return 1 ;;
*) [ -t 1 ] && [ "$BER_TSV" != "1" ] ;;
esac
}
# === init ====================================================================
# prbs set + prbs get. The 'get' is not decoration: a lane that did not lock
# still reports a BER later, and it is a meaningless one.
blanton_ber_init() {
_ber_units_check || return 1
local unit out total ok rc=0
for unit in $BER_UNITS; do
_ber_info "unit $unit: prbs set ${BER_POLY} on ${BER_PORTS}"
_ber_bcm "$unit" "prbs set ${BER_POLY}" >/dev/null || { rc=1; continue; }
out=$(_ber_bcm "$unit" "prbs get") || { rc=1; continue; }
[ "$BER_DRY_RUN" = "1" ] && continue
# lines look like: " 185 : PRBS OK!has been unlocked since last call"
total=$(printf '%s\n' "$out" | grep -cE '^[ \t]*[0-9]+[ \t]*:')
ok=$(printf '%s\n' "$out" | grep -cE '^[ \t]*[0-9]+[ \t]*:.*PRBS OK')
if [ "$total" -eq 0 ]; then
_ber_err "unit $unit: 'prbs get' reported no lanes at all"
rc=1
elif [ "$ok" -eq "$total" ]; then
_ber_ok "unit $unit: $ok/$total ports locked"
else
_ber_warn "unit $unit: only $ok/$total ports locked -- the rest will report a meaningless BER:"
printf '%s\n' "$out" | grep -E '^[ \t]*[0-9]+[ \t]*:' | grep -v 'PRBS OK' >&2
rc=2
fi
done
return $rc
}
# === clear ===================================================================
blanton_ber_clear() {
_ber_units_check || return 1
local unit rc=0
for unit in $BER_UNITS; do
_ber_info "unit $unit: prbs clear"
_ber_bcm "$unit" "prbs clear" >/dev/null || rc=1
done
[ "$rc" -eq 0 ] && _ber_ok "PRBS disarmed on unit(s): $BER_UNITS -- run 'init' before measuring again"
return $rc
}
# === start ===================================================================
blanton_ber_start() {
_ber_units_check || return 1
local unit rc=0
for unit in $BER_UNITS; do
_ber_info "unit $unit: prbsstat STArt Interval=${BER_INTERVAL}"
_ber_bcm "$unit" "prbsstat STArt Interval=${BER_INTERVAL}" >/dev/null || rc=1
done
if [ "$rc" -eq 0 ]; then
_ber_ok "BER accumulation running on unit(s): $BER_UNITS"
_ber_info "wait at least ${BER_INTERVAL}s before 'report' -- a shorter run has not accumulated a full interval"
fi
return $rc
}
# === stop ====================================================================
blanton_ber_stop() {
_ber_units_check || return 1
local unit rc=0
for unit in $BER_UNITS; do
_ber_info "unit $unit: prbsstat STOp"
_ber_bcm "$unit" "prbsstat STOp" >/dev/null || rc=1
done
if [ "$rc" -eq 0 ]; then
_ber_ok "BER accumulation stopped on unit(s): $BER_UNITS"
_ber_info "PRBS is still armed -- 'clear' releases the lanes and restores normal operation"
fi
return $rc
}
# === report ==================================================================
# Parses 'prbsstat Ber' output:
# port BER
# ====
# 1[0] : 3.53e-11
# 1[1] : 4.00e-11
# into <port> <lane> <ber> <verdict>, PASS when ber < BER_MAX.
# _ber_render <logfile> [side_file] -> 0 all PASS, 2 any FAIL/NA, 1 parse error
_ber_render() {
local log="$1" side="${2:-/dev/null}" color=0
_ber_use_color && color=1
awk -v MAXBER="$BER_MAX" \
-v FAILONLY="$BER_FAIL_ONLY" \
-v TSV="$BER_TSV" \
-v COLOR="$color" \
-v SIDE="$side" '
function vc(v) {
if (!COLOR) return v
if (v == "PASS") return "\033[32m" v "\033[0m"
if (v == "FAIL") return "\033[31m" v "\033[0m"
return "\033[33m" v "\033[0m"
}
BEGIN {
LIM = MAXBER + 0
NC = 4
HDR[1] = "Port"; AL[1] = 1
HDR[2] = "Lane"; AL[2] = 1
HDR[3] = "BER"; AL[3] = 1
HDR[4] = "RESULT"; AL[4] = 1
worst = -1; worstlane = "-"
}
# bcmcmd hands back CRLF. On the cd/traffic report the counter is followed by
# a delta, so the CR got trimmed with the rest of the line; here the BER is
# the LAST token, so the CR sticks to the number -- it failed the numeric
# test (every lane NA) and, worse, printing it moved the cursor back to
# column 1 so the RESULT column overwrote the start of the row.
{ gsub(/\r/, "") }
{
# " 203[1] : 5.05e-09" (leading spaces vary, "====" separators ignored)
if ($0 !~ /^[ \t]*[0-9]+\[[0-9]+\][ \t]*:/) next
line = $0
sub(/^[ \t]+/, "", line)
p = index(line, "[")
q = index(line, "]")
c = index(line, ":")
port = substr(line, 1, p - 1)
lane = substr(line, p + 1, q - p - 1)
ber = substr(line, c + 1)
gsub(/^[ \t\r]+|[ \t\r]+$/, "", ber)
sub(/[ \t\r].*$/, "", ber)
seen++
n++
PORT[n] = port; LANE[n] = lane; BERS[n] = ber
# a lane that reported something non-numeric has no usable measurement
if (ber ~ /^[0-9]+(\.[0-9]+)?([eE][-+]?[0-9]+)?$/) {
v = ber + 0
if (v < LIM) { V[n] = "PASS"; npass++ }
else { V[n] = "FAIL"; nfail++ }
if (v > worst) { worst = v; worstlane = port "[" lane "]"; worststr = ber }
} else {
V[n] = "NA"; nna++
}
}
END {
if (seen == 0) {
print "error: no \"<port>[<lane>] : <ber>\" line found in the log" > "/dev/stderr"
exit 1
}
# column widths over the rows that will actually be printed
for (c2 = 1; c2 <= NC; c2++) w[c2] = length(HDR[c2])
for (i = 1; i <= n; i++) {
if (FAILONLY && V[i] == "PASS") continue
if (length(PORT[i]) > w[1]) w[1] = length(PORT[i])
if (length(LANE[i]) > w[2]) w[2] = length(LANE[i])
if (length(BERS[i]) > w[3]) w[3] = length(BERS[i])
if (length(V[i]) > w[4]) w[4] = length(V[i])
}
for (c2 = 1; c2 <= NC; c2++) w[c2] += 2
if (TSV) {
print HDR[1] "\t" HDR[2] "\t" HDR[3] "\t" HDR[4]
for (i = 1; i <= n; i++) {
if (FAILONLY && V[i] == "PASS") continue
print PORT[i] "\t" LANE[i] "\t" BERS[i] "\t" V[i]
}
} else {
printf "%*s%*s%*s%*s\n", w[1], HDR[1], w[2], HDR[2], w[3], HDR[3], w[4], HDR[4]
for (i = 1; i <= n; i++) {
if (FAILONLY && V[i] == "PASS") continue
printf "%*s%*s%*s", w[1], PORT[i], w[2], LANE[i], w[3], BERS[i]
# pad on the plain text, then colour, so the columns stay aligned
printf "%*s%s\n", w[4] - length(V[i]), "", vc(V[i])
}
if (FAILONLY && nfail == 0 && nna == 0)
print " (no failing lane)"
}
print ""
printf "# lanes measured : %d\n", n
printf "# %s %d %s %d %s %d (criteria BER < %s)\n", \
vc("PASS"), npass + 0, vc("FAIL"), nfail + 0, vc("NA"), nna + 0, MAXBER
if (worst >= 0)
printf "# worst lane : %s %s\n", worstlane, worststr
if (SIDE != "" && SIDE != "/dev/null")
printf "SUM %d %d %d %d %s %s\n", n, npass + 0, nfail + 0, nna + 0, \
(worst >= 0 ? worststr : "-"), worstlane > SIDE
exit (nfail || nna) ? 2 : 0
}' "$log"
}
# _ber_summary <stamp> -- one table for every unit, printed last
_ber_summary() {
local stamp="$1" unit side g r y n worst=0
g=$'\033[32m'; r=$'\033[31m'; y=$'\033[33m'; n=$'\033[0m'
_ber_use_color || { g=""; r=""; y=""; n=""; }
echo ""
echo "===== summary : all units ====="
printf '%-8s %8s %8s %8s %8s %-12s %-10s %s\n' \
"Unit" "LANES" "PASS" "FAIL" "NA" "WORST BER" "WORST LANE" "RESULT"
local tag lanes pass fail na wber wlane v any=0
for unit in $BER_UNITS; do
side="$BER_LOG_DIR/berside_unit${unit}_${stamp}"
[ -r "$side" ] || continue
read -r tag lanes pass fail na wber wlane < "$side" 2>/dev/null
[ "$tag" = "SUM" ] || continue
any=1
if [ "${fail:-0}" -gt 0 ] || [ "${na:-0}" -gt 0 ]; then
v="${r}FAIL${n}"; worst=2
else
v="${g}PASS${n}"
fi
printf '%-8s %8s %8s %8s %8s %-12s %-10s %b\n' \
"unit $unit" "$lanes" "$pass" "$fail" "$na" "$wber" "$wlane" "$v"
done
[ "$any" = "1" ] || echo " (no unit produced a result)"
echo ""
printf 'criteria: BER < %s\n' "$BER_MAX"
echo ""
return "$worst"
}
blanton_ber_report() {
local unit log side rc worst=0 stamp
# -f <log>: offline, no DUT access, no unit loop -> no cross-unit summary
if [ -n "$BER_REPORT_FILE" ]; then
[ -r "$BER_REPORT_FILE" ] || { _ber_err "cannot read log '$BER_REPORT_FILE'"; return 1; }
_ber_info "report from log: $BER_REPORT_FILE (criteria BER < $BER_MAX)" >&2
_ber_render "$BER_REPORT_FILE"; return $?
fi
_ber_units_check || return 1
if [ "$BER_DRY_RUN" = "1" ]; then
for unit in $BER_UNITS; do _ber_bcm "$unit" "prbsstat Ber" >/dev/null; done
return 0
fi
stamp=$(date +%Y%m%d_%H%M%S 2>/dev/null || echo now)
for unit in $BER_UNITS; do
log="$BER_LOG_DIR/prbsber_unit${unit}_${stamp}.log"
side="$BER_LOG_DIR/berside_unit${unit}_${stamp}"
: > "$side"
if ! _ber_bcm "$unit" "prbsstat Ber" > "$log" 2>&1; then
_ber_err "unit $unit: 'prbsstat Ber' failed (see $log)"; worst=1; continue
fi
[ "$BER_RAW" = "1" ] && { echo "----- unit $unit : raw prbsstat Ber -----"; cat "$log"; }
echo "===== unit $unit : PRBS BER report (raw: $log) ====="
_ber_render "$log" "$side"; rc=$?
[ "$rc" -gt "$worst" ] && worst=$rc
case "$rc" in
0) _ber_ok "unit $unit: every lane below $BER_MAX" ;;
2) _ber_warn "unit $unit: at least one lane FAIL/NA" ;;
*) _ber_err "unit $unit: report parse error" ;;
esac
done
_ber_summary "$stamp"; rc=$?
[ "$rc" -gt "$worst" ] && worst=$rc
rm -f "$BER_LOG_DIR"/berside_unit*_"${stamp}"
return "$worst"
}
# === Help ====================================================================
blanton_ber_help() {
echo -e "\033[1mblanton_ber.sh - SerDes BER test over every cabled port (PRBS via phydiag)\033[0m"
echo ""
echo -e " Units : \033[36m$BER_UNITS\033[0m poly: \033[36m$BER_POLY\033[0m interval: \033[36m${BER_INTERVAL}s\033[0m"
echo -e " Criteria : BER < \033[36m$BER_MAX\033[0m"
echo -e " Ports : \033[36m$BER_PORTS\033[0m"
echo ""
echo -e "\033[1mSubcommands\033[0m"
echo -e " \033[33minit\033[0m prbs set $BER_POLY + prbs get (checks every lane locked)"
echo -e " \033[33mstart\033[0m prbsstat STArt Interval=$BER_INTERVAL"
echo -e " \033[33mreport\033[0m prbsstat Ber -> per-lane table + PASS/FAIL + summary"
echo -e " \033[33mstop\033[0m prbsstat STOp"
echo -e " \033[33mclear\033[0m prbs clear (disarms PRBS -- 'init' again before measuring)"
echo -e " \033[33mhelp\033[0m"
echo ""
echo -e "\033[1mOptions\033[0m"
echo -e " \033[33m-u|--unit\033[0m <0|1|all> bcmcmd unit(s); 'all' = 0 1 (default: $BER_UNITS)"
echo -e " \033[33m-c|--criteria\033[0m <ber> PASS threshold (default $BER_MAX)"
echo -e " \033[33m-i|--interval\033[0m <sec> prbsstat Interval (default $BER_INTERVAL)"
echo -e " \033[33m-p|--ports\033[0m <list> override the port list"
echo -e " \033[33m-F|--fail-only\033[0m report: list only failing lanes"
echo -e " \033[33m--tsv\033[0m report: tab-separated"
echo -e " \033[33m--raw\033[0m report: also print the raw output"
echo -e " \033[33m-f|--file\033[0m <log> report: parse a saved log, do not touch the DUT"
echo -e " \033[33m-d|--debug\033[0m print every bcmcmd"
echo -e " \033[33m-n|--dry-run\033[0m print commands only"
echo ""
echo -e "\033[1mTypical run\033[0m"
echo -e " ./blanton_ber.sh init && ./blanton_ber.sh start"
echo -e " sleep $BER_INTERVAL"
echo -e " ./blanton_ber.sh report"
echo -e " ./blanton_ber.sh stop && ./blanton_ber.sh clear"
echo ""
echo -e "\033[33m PRBS takes the SerDes out of normal operation: links show DOWN and no\033[0m"
echo -e "\033[33m traffic passes. Do not run alongside blanton_traffic_linespeed / blanton_tr518.\033[0m"
}
# === Argument parsing ========================================================
blanton_ber() {
local sub="${1:-help}"; shift 2>/dev/null
while [ $# -gt 0 ]; do
case "$1" in
-u|--unit)
case "$2" in
all|ALL) BER_UNITS="0 1" ;;
*) BER_UNITS="$(echo "$2" | tr ',' ' ')" ;;
esac
shift 2 ;;
-c|--criteria) BER_MAX="$2"; shift 2 ;;
-i|--interval) BER_INTERVAL="$2"; shift 2 ;;
-p|--ports) BER_PORTS="$2"; shift 2 ;;
-f|--file) BER_REPORT_FILE="$2"; shift 2 ;;
-F|--fail-only) BER_FAIL_ONLY=1; shift ;;
--tsv) BER_TSV=1; shift ;;
--raw) BER_RAW=1; shift ;;
--color) BER_COLOR=always; shift ;;
--no-color) BER_COLOR=never; shift ;;
-d|--debug) DEBUG_MODE=1; shift ;;
-n|--dry-run) BER_DRY_RUN=1; shift ;;
-h|--help) blanton_ber_help; return 0 ;;
*) _ber_err "unknown option '$1'"; return 1 ;;
esac
done
case "$sub" in
init) blanton_ber_init ;;
clear) blanton_ber_clear ;;
start) blanton_ber_start ;;
stop) blanton_ber_stop ;;
report) blanton_ber_report ;;
help|-h|--help) blanton_ber_help ;;
*) _ber_err "unknown subcommand '$sub'"; blanton_ber_help; return 1 ;;
esac
}
# Run when executed, define-only when sourced (same as the other blanton_*.sh).
if [ "${BASH_SOURCE[0]}" = "$0" ]; then
blanton_ber "$@"
fi
src/Script_ABC_Blanton/Blanton_Script/blanton_multiphase_margin.sh
+1250
View File
File diff suppressed because it is too large Load Diff
src/Script_ABC_Blanton/Blanton_Script/blanton_tr518.sh
+326
View File
@@ -0,0 +1,326 @@
#!/usr/bin/env bash
# =============================================================================
# blanton_tr518.sh -- TH6 built-in packet test (tr 518) via bcmcmd
# =============================================================================
# Version History:
# V1.0.1 2026-08-28 Fix: start reported ERR on a run that was actually fine.
# bcmcmd exits NON-zero on 'tr 518' because the test
# outlives its response poll ("polling socket timeout:
# Success") -- the command had been accepted and was
# running. The tr 518 step is now judged on a POSITIVE
# marker in the output ("TR 518 TEST PARAMETERS", which
# the shell prints only after it starts the test) instead
# of on bcmcmd's exit status, and "polling socket timeout"
# is tolerated generally. Failures now also say WHICH
# check tripped (shell rejected it / bcmcmd exited N).
# V1.0.0 2026-08-28 First version. Bash port of tools/TR518.txt, command for
# command. start = port cd lb=mac, l2 learn off,
# test mode nr=yes, tr 518 ... testphase=1, then a settle
# wait so a power reading taken afterwards is a loaded and
# stable one rather than a ramping one.
# stop = port cd lb=none (exactly what TR518.txt does).
# -u 0 | -u 1 | -u all (default both).
# =============================================================================
#
# What this is for: tr 518 loads the switch so the power rails can be measured
# under traffic. The usual sequence is
#
# blanton_tr518.sh start # loads both units, waits to settle
# TH6_SWB0_power_readback.sh # now the numbers mean something
# TH6_SWB1_power_readback.sh
# blanton_tr518.sh stop
#
# ⚠️ tr 518 and blanton_traffic_linespeed CANNOT run at the same time. Both take
# over the cd ports and L2 learning; running one while the other is set up
# gives numbers from neither test. Stop one before the other starts.
#
# ⚠️ stop only undoes the loopback -- see TR_RESTORE_* below.
#
# Usage (run directly):
# ./blanton_tr518.sh start # both units
# ./blanton_tr518.sh start -u 0 # unit 0 only
# ./blanton_tr518.sh start -u 1 # unit 1 only
# ./blanton_tr518.sh stop [-u 0|1]
# ./blanton_tr518.sh help
#
# Usage (sourced, like the other blanton_*.sh tools):
# source blanton_tr518.sh
# blanton_tr518 start -u 0
#
# Options:
# -u|--unit <0|1|all|0,1> bcmcmd unit(s). Default: $TR_UNITS ("0 1")
# -w|--wait <sec> start: settle wait after tr 518 (default $TR_SETTLE_SEC)
# --no-wait start: skip the settle wait entirely
# -d|--debug print every bcmcmd and its output
# -n|--dry-run print commands only, do not touch the DUT
# -h|--help help
#
# Environment overrides:
# BCMCMD_CMD=bcmcmd TR_UNITS="0 1" TR_SETTLE_SEC=120 TR_UNIT_GAP_SEC=1
# TR_TEST_ARGS="..." TR_LB_PORTS=cd TR_RESTORE_LEARN=0 TR_RESTORE_TESTMODE=0
# DEBUG_MODE=1
# =============================================================================
# === Config ==================================================================
BCMCMD_CMD="${BCMCMD_CMD:-bcmcmd}"
TR_UNITS="${TR_UNITS:-0 1}" # one DUT = two switch boards (0 and 1)
# Settle wait after tr 518 is issued. The point is NOT the test itself -- it is
# to stop someone reading power while traffic is still ramping and reporting a
# number that is neither idle nor loaded. Lower it only if you know the rails
# have already settled.
TR_SETTLE_SEC="${TR_SETTLE_SEC:-120}"
# Gap between unit 0 and unit 1 (each unit is set up as a complete block, the
# way TR518.txt does it -- the cd ports are in MAC loopback, so a unit does not
# depend on the other one being ready).
TR_UNIT_GAP_SEC="${TR_UNIT_GAP_SEC:-1}"
# Ports put into MAC loopback. 'cd' = the cd port group, per TR518.txt.
TR_LB_PORTS="${TR_LB_PORTS:-cd}"
# The tr 518 argument string, verbatim from tools/TR518.txt. One editable line
# so it can be pasted straight from / into a manual bcmcmd.
# Printed by the BCM shell only after tr 518 has accepted its arguments and
# started. Used as the success marker, because bcmcmd's own exit status is not
# trustworthy for a command that runs longer than its response poll.
TR_TEST_OK_PAT="${TR_TEST_OK_PAT:-TR 518 TEST PARAMETERS}"
TR_TEST_ARGS="${TR_TEST_ARGS:-Scenario=6 Profile=2 Count=260 PktSize=324 PortList=1-259,270-565 rm=ext CheckLinkTime=20 CheckDataTime=200 testphase=1}"
# TR518.txt stops with 'port cd lb=none' and nothing else, so that is the
# default here too. But note what start changed and stop does NOT put back:
# l2 learn off -> the unit keeps learning disabled
# test mode nr=yes -> the unit stays in test mode
# Both persist until something else changes them or the box reboots. Set these
# to 1 if you want stop to be a true inverse; they are off by default because
# they are not in the bench-verified list.
TR_RESTORE_LEARN="${TR_RESTORE_LEARN:-0}"
TR_RESTORE_TESTMODE="${TR_RESTORE_TESTMODE:-0}"
DEBUG_MODE=${DEBUG_MODE:-0}
TR_DRY_RUN=${TR_DRY_RUN:-0}
TR_NO_WAIT=${TR_NO_WAIT:-0}
# === Logging =================================================================
_tr_info() { echo -e "[\033[34mINFO\033[0m] $*"; }
_tr_ok() { echo -e "[\033[32m OK \033[0m] $*"; }
_tr_warn() { echo -e "[\033[33mWARN\033[0m] $*" >&2; }
_tr_err() { echo -e "[\033[31mERR \033[0m] $*" >&2; }
_tr_dbg() { [ "$DEBUG_MODE" = "1" ] && echo -e "\033[90m[DEBG] $*\033[0m" >&2; return 0; }
# === bcmcmd wrapper ==========================================================
# stdin is closed for the same reason as in blanton_traffic_linespeed.sh:
# bcmcmd otherwise inherits the caller's stdin and eats whatever a surrounding
# loop was reading.
#
# bcmcmd exits 0 even when the BCM shell refused the command, so the output is
# pattern-matched as well (the V0.3.1 lesson from blanton_traffic_linespeed.sh).
TR_ERR_PAT="${TR_ERR_PAT:-ERROR|Failed to execute|Invalid|Syntax error|Unavailable|Unknown command}"
# ...and the reverse also happens: bcmcmd exits NON-zero on a command that was
# accepted and is running. 'tr 518' outlives bcmcmd's response poll, so bcmcmd
# gives up with "polling socket timeout: Success" and a non-zero status while
# the test carries on inside the BCM shell. Treating that as a failure is what
# made V1.0.0 report ERR on a run that was actually fine.
TR_BENIGN_PAT="${TR_BENIGN_PAT:-polling socket timeout}"
# _tr_bcm <unit> <cmd> -> 0 ok, 1 failed
# _tr_bcm_ok <unit> <ok_marker> <cmd> -> as above, but if the output contains
# <ok_marker> the command is a success
# regardless of exit status.
#
# The marker is a POSITIVE proof of success ("the shell printed the thing it
# only prints when it accepted this command"), which is far more reliable than
# trying to enumerate every way bcmcmd can look unhappy.
_tr_bcm() { _tr_bcm_ok "$1" "" "${@:2}"; }
_tr_bcm_ok() {
local unit="$1" okpat="$2"; shift 2
local cmd="$*" out rc why=""
_tr_dbg "$BCMCMD_CMD -n $unit -c '$cmd'"
if [ "$TR_DRY_RUN" = "1" ]; then
echo "[DRY ] $BCMCMD_CMD -n $unit -c '$cmd'"
return 0
fi
out=$("$BCMCMD_CMD" -n "$unit" -c "$cmd" </dev/null 2>&1); rc=$?
[ "$DEBUG_MODE" = "1" ] && [ -n "$out" ] && echo "$out"
# 1. positive proof wins over everything else
if [ -n "$okpat" ] && echo "$out" | grep -qF "$okpat"; then
[ "$rc" -ne 0 ] && _tr_dbg "unit $unit: bcmcmd rc=$rc but '$okpat' seen -> accepted"
return 0
fi
# 2. the BCM shell said no
if echo "$out" | grep -qiE "$TR_ERR_PAT"; then
why="the BCM shell rejected it"
# 3. bcmcmd itself was unhappy -- unless it is the known transport artifact
elif [ "$rc" -ne 0 ]; then
if echo "$out" | grep -qiE "$TR_BENIGN_PAT"; then
_tr_dbg "unit $unit: bcmcmd rc=$rc (${TR_BENIGN_PAT}) -> tolerated"
return 0
fi
why="bcmcmd exited $rc"
else
return 0
fi
_tr_err "unit $unit: $why -- '$cmd'"
[ "$DEBUG_MODE" = "1" ] || { [ -n "$out" ] && echo "$out" >&2; }
return 1
}
_tr_units_check() {
local u ok=""
for u in $TR_UNITS; do
case "$u" in
0|1) ok="$ok $u" ;;
*) _tr_err "invalid unit '$u' (use 0, 1 or all)"; return 1 ;;
esac
done
[ -n "$ok" ] || { _tr_err "no unit selected"; return 1; }
TR_UNITS="${ok# }"
return 0
}
_tr_is_uint() { case "$1" in ''|*[!0-9]*) return 1 ;; *) return 0 ;; esac; }
_tr_gap() {
[ "$TR_DRY_RUN" = "1" ] && return 0
[ "$TR_UNIT_GAP_SEC" = "0" ] && return 0
sleep "$TR_UNIT_GAP_SEC"
}
# === start ===================================================================
# One complete block per unit, exactly the order in tools/TR518.txt.
blanton_tr518_start() {
_tr_units_check || return 1
_tr_is_uint "$TR_SETTLE_SEC" || { _tr_err "settle wait '$TR_SETTLE_SEC' is not an integer (-w <sec>)"; return 1; }
local unit fail=0 first=1
_tr_info "TR518 start on unit(s): $TR_UNITS"
for unit in $TR_UNITS; do
[ "$first" = "0" ] && _tr_gap
first=0
_tr_info "unit $unit: port $TR_LB_PORTS lb=mac -> l2 learn off -> test mode nr=yes -> tr 518"
_tr_bcm "$unit" "port $TR_LB_PORTS lb=mac" || fail=$((fail+1))
_tr_bcm "$unit" "l2 learn off" || fail=$((fail+1))
_tr_bcm "$unit" 'dsh -c "test mode nr=yes"' || fail=$((fail+1))
# "TR 518 TEST PARAMETERS" is printed only once the shell has parsed the
# arguments and started the test -- that is the proof we check for.
_tr_bcm_ok "$unit" "$TR_TEST_OK_PAT" "dsh -c \"tr 518 $TR_TEST_ARGS\"" || fail=$((fail+1))
done
if [ "$fail" -ne 0 ]; then
_tr_err "$fail command(s) failed -- traffic may not be running, not waiting"
_tr_warn "the unit(s) may still be in loopback: blanton_tr518.sh stop"
return 1
fi
if [ "$TR_NO_WAIT" = "1" ] || [ "$TR_SETTLE_SEC" = "0" ]; then
_tr_ok "TR518 running on unit(s): $TR_UNITS (settle wait skipped)"
_tr_warn "rails may still be ramping -- a power reading taken now is not a settled one"
return 0
fi
_tr_info "settling ${TR_SETTLE_SEC}s before the rails are worth reading ..."
[ "$TR_DRY_RUN" = "1" ] || sleep "$TR_SETTLE_SEC"
_tr_ok "TR518 running and settled on unit(s): $TR_UNITS"
_tr_info "read power now: TH6_SWB0_power_readback.sh / TH6_SWB1_power_readback.sh"
_tr_info "when finished: blanton_tr518.sh stop"
return 0
}
# === stop ====================================================================
# TR518.txt stops with 'port cd lb=none' only. l2 learning and test mode are
# left as start set them unless TR_RESTORE_* is turned on.
blanton_tr518_stop() {
_tr_units_check || return 1
local unit fail=0 first=1
_tr_info "TR518 stop on unit(s): $TR_UNITS"
for unit in $TR_UNITS; do
[ "$first" = "0" ] && _tr_gap
first=0
_tr_bcm "$unit" "port $TR_LB_PORTS lb=none" || fail=$((fail+1))
[ "$TR_RESTORE_LEARN" = "1" ] && { _tr_bcm "$unit" "l2 learn on" || fail=$((fail+1)); }
[ "$TR_RESTORE_TESTMODE" = "1" ] && { _tr_bcm "$unit" 'dsh -c "test mode nr=no"' || fail=$((fail+1)); }
done
if [ "$fail" -eq 0 ]; then
_tr_ok "unit(s) $TR_UNITS: port $TR_LB_PORTS lb=none"
[ "$TR_RESTORE_LEARN" = "1" ] || \
_tr_info "l2 learning is still off (TR_RESTORE_LEARN=1 to put it back)"
[ "$TR_RESTORE_TESTMODE" = "1" ] || \
_tr_info "test mode is still nr=yes (TR_RESTORE_TESTMODE=1 to put it back)"
else
_tr_warn "$fail command(s) failed -- check the unit is not still in loopback:"
_tr_warn " bcmcmd -n <u> -c 'port $TR_LB_PORTS' | head"
return 1
fi
return 0
}
# === Help ====================================================================
blanton_tr518_help() {
echo -e "\033[1mblanton_tr518.sh - TH6 built-in packet test (tr 518) for power loading\033[0m"
echo ""
echo -e " Units : \033[36m$TR_UNITS\033[0m"
echo -e " Settle wait : \033[36m${TR_SETTLE_SEC}s\033[0m after tr 518 (so power is read loaded, not ramping)"
echo -e " Loopback : \033[36mport $TR_LB_PORTS lb=mac\033[0m"
echo -e " tr 518 args : \033[36m$TR_TEST_ARGS\033[0m"
echo ""
echo -e "\033[1mSubcommands\033[0m"
echo -e " \033[33mstart\033[0m per unit: port $TR_LB_PORTS lb=mac -> l2 learn off -> test mode nr=yes -> tr 518 -> wait"
echo -e " \033[33mstop\033[0m per unit: port $TR_LB_PORTS lb=none"
echo -e " \033[33mhelp\033[0m"
echo ""
echo -e "\033[1mOptions\033[0m"
echo -e " \033[33m-u|--unit\033[0m <0|1|all> bcmcmd unit(s); 'all' = 0 1 (default: $TR_UNITS)"
echo -e " \033[33m-w|--wait\033[0m <sec> start: settle wait (default $TR_SETTLE_SEC)"
echo -e " \033[33m--no-wait\033[0m start: skip the settle wait"
echo -e " \033[33m-d|--debug\033[0m print every bcmcmd and its output"
echo -e " \033[33m-n|--dry-run\033[0m print commands only, do not touch the DUT"
echo ""
echo -e "\033[1mExamples\033[0m"
echo -e " ./blanton_tr518.sh start # both units, then wait ${TR_SETTLE_SEC}s"
echo -e " ./blanton_tr518.sh start -u 0 # unit 0 only"
echo -e " ./blanton_tr518.sh stop -u 1 # release unit 1"
echo -e " ./blanton_tr518.sh start -n # show the bcmcmds, touch nothing"
echo ""
echo -e "\033[33m stop only sends 'port $TR_LB_PORTS lb=none'. l2 learning stays off and test mode\033[0m"
echo -e "\033[33m stays nr=yes -- TR_RESTORE_LEARN=1 / TR_RESTORE_TESTMODE=1 to put them back.\033[0m"
echo -e "\033[33m tr 518 and blanton_traffic_linespeed cannot run together.\033[0m"
}
# === Argument parsing ========================================================
blanton_tr518() {
local sub="${1:-help}"; shift 2>/dev/null
while [ $# -gt 0 ]; do
case "$1" in
-u|--unit)
case "$2" in
all|ALL) TR_UNITS="0 1" ;;
*) TR_UNITS="$(echo "$2" | tr ',' ' ')" ;;
esac
shift 2 ;;
-w|--wait) TR_SETTLE_SEC="$2"; shift 2 ;;
--no-wait) TR_NO_WAIT=1; shift ;;
-d|--debug) DEBUG_MODE=1; shift ;;
-n|--dry-run) TR_DRY_RUN=1; shift ;;
-h|--help) blanton_tr518_help; return 0 ;;
*) _tr_err "unknown option '$1'"; return 1 ;;
esac
done
case "$sub" in
start) blanton_tr518_start ;;
stop) blanton_tr518_stop ;;
help|-h|--help) blanton_tr518_help ;;
*) _tr_err "unknown subcommand '$sub'"; blanton_tr518_help; return 1 ;;
esac
}
# Run when executed, define-only when sourced (same as the other blanton_*.sh).
if [ "${BASH_SOURCE[0]}" = "$0" ]; then
blanton_tr518 "$@"
fi
src/Script_ABC_Blanton/Blanton_Script/blanton_traffic_linespeed.sh
+339 -19
View File
@@ -6,7 +6,7 @@
# V0.1.0 2026-08-17 First version. Bash port of the three Tera Term macros
# utils/traffic_loopback_vlan_setting.ttl (VLAN 30..137,
# port pair cdN <-> cdN+32), utils/traffic_loopback_start.ttl
# (tx 100 length=512 VLantag=<vid>) and
# (tx <count> length=<len> VLantag=<vid>) and
# utils/traffic_loopback_vlan_remove.ttl.
# One DUT = two switch boards -> bcmcmd unit 0 and 1
# (bcmcmd -n <unit>), default both.
@@ -61,6 +61,67 @@
# intentional difference from
# tools/bcm_mibpair_report_V1.1.0.py, which hides NA pairs
# unless -a is given.
# V0.4.1 2026-08-19 Fix: report printed every counter as 2147483647 (INT32_MAX).
# grp() rendered values with sprintf("%d", v); the DUT's awk
# casts to a 32-bit int for %d, so any counter above 2^31-1
# -- i.e. every real line-speed run -- saturated. Values are
# now formatted with %.0f, which stays in awk's double domain
# (exact to 2^53, far above any MIB counter).
# NOTE: the PASS/FAIL verdicts were NEVER affected -- the
# cross-check compares TX[]/RX[] doubles directly and only
# the display path went through grp(). Past reports that said
# PASS were right; only the numbers shown were wrong.
# Same fix applied to the "# FAIL ..." delta line (%+d ->
# %+.0f), which would otherwise saturate when a dead port
# makes the delta the size of the whole counter.
# V0.5.0 2026-08-28 Add: the 100G uplink (ce0, VLAN 138) joins init / start /
# stop / report, from tools/100G_Traffic.txt.
# ce0 is NOT a loopback pair: there is one per unit and the
# two are cabled to each other, so its verdict is a
# CROSS-UNIT check and cannot be decided from one unit's
# counters. It therefore appears as the LAST row of each
# unit table with the verdict DEFER, and is judged in a new
# summary printed once at the very bottom, after every
# unit -- which also carries the per-unit PASS/FAIL/NA
# totals ("all Results" in one place).
# TL_CE_MODE=cross (default) | self picks the topology;
# it is a plain editable flag, NOT auto-detected, because
# a non-zero RX cannot tell the two cablings apart.
# With only one unit selected the summary reports
# UNDECIDED (exit 3) instead of guessing.
# TL_CE_ENABLE=0 restores the old cd-pairs-only behaviour.
# V0.7.0 2026-09-01 Change: tx bursts carry PatternRandom=yes and the defaults
# become tx 200 length=324 (were 100 / 512).
# Random payload keeps the bit pattern changing instead of
# repeating, which is what makes a marginal lane show up;
# a fixed pattern can sit on a benign sequence all run.
# TL_TX_RANDOM=no forces the fixed pattern, "" leaves the
# argument off entirely (pre-V0.7.0 wire format).
# NOTE: counters scale with count x length, so totals from
# before this build are not comparable - 200x324 moves
# about 27% more bytes per burst than 100x512.
# V0.6.0 2026-08-28 Add: ce0 traffic is now SUSTAINED, not a single burst.
# A cd pair keeps its packets circulating because they
# flood to the partner port; ce0 has no partner and a
# switch will not send a frame back out its ingress port,
# so 'tx 100' was exactly one round trip (TX 100/RX 100)
# and then silence. init now sets an INGRESS MIRROR of ce0
# back to ce0 -- the mirrored copy is not egress-filtered,
# so each packet keeps lapping until stop turns it off.
# init : mirror init; mirror port ce0 Mode=Ingress
# DestPort=ce0; vlan create/add
# stop : mirror port ce0 Mode=Off (FIRST -- this is what
# breaks the loop), then vlan remove
# Bench-verified command set. TL_CE_MIRROR=0 goes back to
# the one-shot burst.
# Change: TL_CE_MODE now defaults to 'self'. 'ps ce' shows
# one ce port per unit and a unit-0-only burst returned on
# unit 0, so the cross-unit reading was wrong.
# V0.5.1 2026-08-28 Add: TL_CE_COUNTER selects which counter judges the ce
# port -- packets (MIB_TPOK/MIB_RPOK, default, same as the
# cd rows) or bytes (MIB_TBYT/MIB_RBYT). The report prints
# which one it used under the table, so a byte figure is
# never mistaken for a packet count next to the cd rows.
# =============================================================================
#
# The VLAN/port table below is copied verbatim from
@@ -91,6 +152,8 @@
# aliases: -tx | --tx
# -l|--length <n> tx packet length (default $TL_TX_LENGTH)
# aliases: -length | --len
# -r|--random <yes|no> tx PatternRandom (default $TL_TX_RANDOM;
# empty string omits the argument)
# -p|--ports <list|all> ps: port list ('all' = plain 'ps', every port)
# -T|--tolerance <n> report: allowed |delta| in packets (default 0;
# -T 1 absorbs the normal snapshot skew)
@@ -110,7 +173,8 @@
# -h|--help help
#
# Environment overrides:
# BCMCMD_CMD=bcmcmd TL_UNITS="0 1" TL_TX_COUNT=100 TL_TX_LENGTH=512
# BCMCMD_CMD=bcmcmd TL_UNITS="0 1" TL_TX_COUNT=200 TL_TX_LENGTH=324
# TL_TX_RANDOM=yes
# TL_PS_PORTS="1-24,40-96,..." TL_TOLERANCE=0 TL_LOG_DIR=/tmp
# DEBUG_MODE=1
#
@@ -122,8 +186,14 @@
# === Config ==================================================================
BCMCMD_CMD="${BCMCMD_CMD:-bcmcmd}"
TL_UNITS="${TL_UNITS:-0 1}" # one DUT = two switch boards (0 and 1)
TL_TX_COUNT="${TL_TX_COUNT:-100}"
TL_TX_LENGTH="${TL_TX_LENGTH:-512}"
TL_TX_COUNT="${TL_TX_COUNT:-200}"
TL_TX_LENGTH="${TL_TX_LENGTH:-324}"
# PatternRandom=yes|no is appended to every tx burst. Random payload exercises
# the SerDes with changing bit patterns instead of the repeating one a fixed
# pattern produces, which is what makes a marginal lane show up.
# Set to "" to leave the argument off entirely (pre-V0.7.0 behaviour).
TL_TX_RANDOM="${TL_TX_RANDOM:-yes}"
TL_DEFAULT_VLAN="${TL_DEFAULT_VLAN:-1}"
TL_DEFAULT_VLAN_PBM="${TL_DEFAULT_VLAN_PBM:-cd}"
@@ -132,6 +202,56 @@ TL_DEFAULT_VLAN_PBM="${TL_DEFAULT_VLAN_PBM:-cd}"
# pasted straight from/into a manual "bcmcmd -n 0 -c 'ps <list>'".
TL_PS_PORTS="${TL_PS_PORTS:-1-24,40-96,112-168,184-240,256-259,270-308,310-327,342-380,382-399,414-452,454-471,486-524,526-543,558-565}"
# --- 100G uplink (ce0) ------------------------------------------------------
# The cd pairs above are loopback pairs WITHIN one switch unit (cdN <-> cdN+32).
# ce0 is not a pair: 'ps ce' shows exactly one ce port per unit, and it is looped
# back on itself. Bench-confirmed 2026-08-28 -- a tx burst on unit 0 alone came
# back on unit 0 (TPOK +100 AND RPOK +100), which only happens on a self loop.
#
# TL_CE_MODE=self ce0 loops back on itself (default, matches bench)
# verdict: TX == RX within the unit, decided in its own table
# TL_CE_MODE=cross unit0.ce0 <-> unit1.ce0 cabled together
# verdict: unit0.TX == unit1.RX and unit0.RX == unit1.TX,
# decided in the summary; needs BOTH units
#
# If the bench cabling changes, edit TL_CE_MODE -- it is not auto-detected,
# because "RX happens to be non-zero" cannot tell the two topologies apart.
# Note the two modes agree whenever both units send the same amount, so a wrong
# setting looks fine until something actually breaks: with a self loop read as
# cross, BOTH links dying still leaves unit0.TX == unit1.RX (0 == 0) -> PASS.
TL_CE_ENABLE=${TL_CE_ENABLE:-1} # 0 = skip ce0 entirely (cd pairs only)
TL_CE_VLAN="${TL_CE_VLAN:-138}" # one past the cd range (30..137)
TL_CE_PORT="${TL_CE_PORT:-ce0}" # bcm port name, same on both units
TL_CE_MODE="${TL_CE_MODE:-self}" # cross | self -- see above
# --- Why ce0 needs an ingress mirror -----------------------------------------
# A cd pair sustains itself: the packet floods to the OTHER member, goes out the
# cable, comes back on the partner, floods to the other member again -- forever.
# ce0 has no partner. A switch never forwards a frame back out the port it
# arrived on (source-port knockout), so with ce0 as the only VLAN member the
# returning packet is dropped and one 'tx' burst is exactly one round trip:
# TX 100, RX 100, done. That measures the link, it does not load it.
#
# An INGRESS MIRROR of ce0 back to ce0 is the way round it: the mirrored copy is
# not subject to the egress filter, so it does leave the port it came in on.
# Each circulating packet makes exactly one copy per lap -- 1:1, not amplifying,
# so the load is set by how many packets 'start' injects, and it runs until
# 'stop' turns the mirror off.
#
# ⚠️ The loop does NOT stop on its own. Unlike the cd pairs, removing the VLAN
# membership is not enough -- 'stop' must set Mode=Off, or the port keeps
# running flat out with nothing in 'show interfaces status' to hint at it.
# ⚠️ 'mirror init' resets the mirror module. Anything else using mirroring on
# this box (ERSPAN, monitoring) is cleared. Set TL_CE_MIRROR=0 to skip it.
TL_CE_MIRROR=${TL_CE_MIRROR:-1} # 0 = no mirror (one-shot burst, as before)
# Which counter the ce port is judged on. Packets by default, the same counter
# as the cd pairs, so every row of the table is in the same unit.
# packets -> MIB_TPOK / MIB_RPOK (default, same as the cd rows)
# bytes -> MIB_TBYT / MIB_RBYT
# Either way the report prints which one it used under the table.
TL_CE_COUNTER="${TL_CE_COUNTER:-packets}"
# --- report (pair cross-check) defaults -------------------------------------
TL_TOLERANCE="${TL_TOLERANCE:-0}" # allowed |delta| in packets before FAIL
TL_LOG_DIR="${TL_LOG_DIR:-/tmp}" # where the raw 'show c' capture is kept
@@ -365,6 +485,21 @@ traffic_linespeed_init() {
_tl_bcm_q "$unit" "vlan add $vid pbm=$pa,$pb" || fail=$((fail+1))
n=$((n+1))
done 3<<< "$TL_PAIRS"
# 100G uplink: one port, its own VLAN, added last so it is easy to skip.
# The mirror goes up BEFORE the VLAN so the loop is armed the moment the
# first packet is injected.
if [ "$TL_CE_ENABLE" = "1" ]; then
if [ "$TL_CE_MIRROR" = "1" ]; then
_tl_bcm_q "$unit" "mirror init" || fail=$((fail+1))
_tl_bcm_q "$unit" "mirror port $TL_CE_PORT Mode=Ingress DestPort=$TL_CE_PORT" \
|| fail=$((fail+1))
fi
_tl_bcm_run "$unit" "$TL_BENIGN_CREATE" "vlan create $TL_CE_VLAN"; rc=$?
[ "$rc" = "1" ] && fail=$((fail+1))
[ "$rc" = "2" ] && exist=$((exist+1))
_tl_bcm_q "$unit" "vlan add $TL_CE_VLAN pbm=$TL_CE_PORT" || fail=$((fail+1))
n=$((n+1))
fi
if [ "$fail" -eq 0 ]; then
_tl_ok "unit $unit: $n VLANs configured$([ "$exist" -gt 0 ] && echo " ($exist already existed)"), port pairs added"
else
@@ -399,17 +534,29 @@ traffic_linespeed_start() {
_tl_units_check || return 1
_tl_is_uint "$TL_TX_COUNT" || { _tl_err "tx count '$TL_TX_COUNT' is not a positive integer (-tx|-c <n>)"; return 1; }
_tl_is_uint "$TL_TX_LENGTH" || { _tl_err "tx length '$TL_TX_LENGTH' is not a positive integer (-length|-l <n>)"; return 1; }
local rnd=""
case "$TL_TX_RANDOM" in
yes|no) rnd=" PatternRandom=$TL_TX_RANDOM" ;;
"") rnd="" ;;
*) _tl_err "PatternRandom '$TL_TX_RANDOM' must be yes, no or empty (-r|--random)"; return 1 ;;
esac
local unit vid pa pb n fail
for unit in $TL_UNITS; do
n=0; fail=0
_tl_info "unit $unit: tx $TL_TX_COUNT length=$TL_TX_LENGTH per VLAN 30..137"
_tl_info "unit $unit: tx $TL_TX_COUNT length=$TL_TX_LENGTH${rnd} per VLAN 30..137"
while read -r vid pa pb <&3; do
[ -z "$vid" ] && continue
_tl_bcm_q "$unit" "tx $TL_TX_COUNT length=$TL_TX_LENGTH VLantag=$vid" || fail=$((fail+1))
_tl_bcm_q "$unit" "tx $TL_TX_COUNT length=$TL_TX_LENGTH VLantag=$vid${rnd}" || fail=$((fail+1))
n=$((n+1))
done 3<<< "$TL_PAIRS"
if [ "$TL_CE_ENABLE" = "1" ]; then
_tl_bcm_q "$unit" "tx $TL_TX_COUNT length=$TL_TX_LENGTH VLantag=$TL_CE_VLAN${rnd}" || fail=$((fail+1))
n=$((n+1))
fi
if [ "$fail" -eq 0 ]; then
_tl_ok "unit $unit: $n bursts sent ($((n * TL_TX_COUNT)) packets, ${TL_TX_LENGTH}B each)"
[ "$TL_CE_ENABLE" = "1" ] && [ "$TL_CE_MIRROR" = "1" ] && \
_tl_info "unit $unit: ${TL_CE_PORT} is now circulating and will keep running until 'stop'"
else
_tl_warn "unit $unit: $n bursts attempted, $fail failed"
fi
@@ -433,6 +580,25 @@ traffic_linespeed_stop() {
fi
n=$((n+1))
done 3<<< "$TL_PAIRS"
if [ "$TL_CE_ENABLE" = "1" ]; then
# Mirror OFF first: that is what actually breaks the loop. Removing
# the VLAN membership does not -- the mirrored copy never consulted
# the VLAN in the first place.
if [ "$TL_CE_MIRROR" = "1" ]; then
_tl_bcm_q "$unit" "mirror port $TL_CE_PORT Mode=Off" || {
fail=$((fail+1))
_tl_err "unit $unit: ${TL_CE_PORT} mirror still ON -- the loop is STILL RUNNING"
_tl_err " stop it by hand: ${BCMCMD_CMD} -n $unit -c 'mirror port $TL_CE_PORT Mode=Off'"
}
fi
_tl_bcm_run "$unit" "$TL_BENIGN_REMOVE" "vlan remove $TL_CE_VLAN pbm=$TL_CE_PORT"
[ "$?" = "1" ] && fail=$((fail+1))
if [ "$TL_DESTROY" = "1" ]; then
_tl_bcm_run "$unit" "$TL_BENIGN_REMOVE" "vlan destroy $TL_CE_VLAN"
[ "$?" = "1" ] && fail=$((fail+1))
fi
n=$((n+1))
fi
if [ "$fail" -eq 0 ]; then
_tl_ok "unit $unit: $n VLANs cleaned$([ "$TL_DESTROY" = "1" ] && echo " and destroyed")"
else
@@ -467,8 +633,11 @@ traffic_linespeed_ps() {
# (a cd port absent from 'show c' means the counter is zero or the
# console scrolled -- cross-check with 'ps' before blaming the port).
# _tl_pair_report <logfile> -> 0 all PASS, 2 any FAIL/NA, 1 parse error
# _tl_pair_report <logfile> [side_file]
# side_file (optional) receives machine-readable lines for the cross-unit
# summary: SUM <npass> <nfail> <nna> CE <tx> <rx> (CE omitted if absent)
_tl_pair_report() {
local log="$1" color=0
local log="$1" side="${2:-/dev/null}" color=0
# PASS green / FAIL red / NA yellow. auto = only when stdout is a terminal,
# so redirecting to a file or piping into grep/diff stays plain text.
case "$TL_COLOR" in
@@ -484,9 +653,13 @@ _tl_pair_report() {
-v WITHPORT="$TL_REPORT_WITHPORT" \
-v QUIET="$TL_REPORT_QUIET" \
-v TSV="$TL_REPORT_TSV" \
-v COLOR="$color" '
-v COLOR="$color" \
-v CEPORT="$([ "$TL_CE_ENABLE" = "1" ] && echo "$TL_CE_PORT")" \
-v CEMODE="$TL_CE_MODE" \
-v CECOUNTER="$TL_CE_COUNTER" \
-v SIDE="$side" '
function grp(v, s,out,l,i) {
s = sprintf("%d", v)
s = sprintf("%.0f", v)
if (!GROUPED) return s
out = ""; l = length(s)
for (i = 1; i <= l; i++) {
@@ -500,8 +673,9 @@ _tl_pair_report() {
# colour the verdict token: PASS green, FAIL red, NA yellow
function vc(v) {
if (!COLOR) return v
if (v == "PASS") return "\033[32m" v "\033[0m"
if (v == "FAIL") return "\033[31m" v "\033[0m"
if (v == "PASS") return "\033[32m" v "\033[0m"
if (v == "FAIL") return "\033[31m" v "\033[0m"
if (v == "DEFER") return "\033[36m" v "\033[0m" # cyan: judged in the summary
return "\033[33m" v "\033[0m"
}
function redl(s) { return COLOR ? "\033[31m" s "\033[0m" : s }
@@ -522,11 +696,12 @@ _tl_pair_report() {
if (idx == 0) next
s = substr($0, idx)
kind = substr(s, 5, 4)
if (kind != "TPOK" && kind != "RPOK") next
# POK = packets (the cd pairs), BYT = bytes (used for the ce port)
if (kind != "TPOK" && kind != "RPOK" && kind != "TBYT" && kind != "RBYT") next
p1 = index(s, "."); p2 = index(s, "("); p3 = index(s, ")"); p4 = index(s, ":")
if (p1 == 0 || p2 == 0 || p3 == 0 || p4 == 0 || p2 < p1 || p4 < p3) next
cd = substr(s, p1 + 1, p2 - p1 - 1)
if (cd !~ /^cd[0-9]+$/) next
if (cd !~ /^(cd|ce)[0-9]+$/) next
lp = substr(s, p2 + 1, p3 - p2 - 1)
val = substr(s, p4 + 1)
sub(/^[ \t]+/, "", val)
@@ -534,7 +709,10 @@ _tl_pair_report() {
sub(/[ \t].*$/, "", val)
gsub(/,/, "", val)
LP[cd] = lp
if (kind == "TPOK") { TX[cd] = val + 0; HTX[cd] = 1 } else { RX[cd] = val + 0; HRX[cd] = 1 }
if (kind == "TPOK") { TX[cd] = val + 0; HTX[cd] = 1 }
else if (kind == "RPOK") { RX[cd] = val + 0; HRX[cd] = 1 }
else if (kind == "TBYT") { TXB[cd] = val + 0; HTXB[cd] = 1 }
else { RXB[cd] = val + 0; HRXB[cd] = 1 }
seen++
}
END {
@@ -557,7 +735,7 @@ _tl_pair_report() {
if (d <= TOL + 0) { v = "PASS"; npass++ }
else {
v = "FAIL"; nfail++
FL[++nf] = sprintf("# FAIL %s/%s: %s.TX-%s.RX=%+d %s.RX-%s.TX=%+d", \
FL[++nf] = sprintf("# FAIL %s/%s: %s.TX-%s.RX=%+.0f %s.RX-%s.TX=%+.0f", \
a, b, a, b, dtx, a, b, drx)
}
ta = grp(TX[a]); ra = grp(RX[a]); tb = grp(TX[b]); rb = grp(RX[b])
@@ -567,6 +745,41 @@ _tl_pair_report() {
nrow++; CELL[nrow,1] = pname(b); CELL[nrow,2] = tb; CELL[nrow,3] = rb; CELL[nrow,4] = v
}
# --- 100G uplink, appended LAST so it sits at the bottom of the table ---
# It is a single port, not a pair, so it gets one row. In cross mode the
# verdict needs the OTHER unit counters and is decided in the summary;
# DEFER says "not judged here", which is not the same as NA ("no data").
cev = ""; ceunit = ""
if (CEPORT != "") {
if (CECOUNTER == "packets") {
ceunit = "packets"
haveT = (CEPORT in HTX); haveR = (CEPORT in HRX)
cetv = TX[CEPORT]; cerv = RX[CEPORT]
} else {
ceunit = "bytes"
haveT = (CEPORT in HTXB); haveR = (CEPORT in HRXB)
cetv = TXB[CEPORT]; cerv = RXB[CEPORT]
}
cet = haveT ? grp(cetv) : MISSING
cer = haveR ? grp(cerv) : MISSING
if (!(haveT && haveR)) {
cev = "NA"; nna++
} else if (CEMODE == "self") {
if (absd(cetv - cerv) <= TOL + 0) { cev = "PASS"; npass++ }
else {
cev = "FAIL"; nfail++
FL[++nf] = sprintf("# FAIL %s: TX-RX=%+.0f %s (self loopback)", \
CEPORT, cetv - cerv, ceunit)
}
} else {
cev = "DEFER"
}
nrep++
nrow++; CELL[nrow,1] = pname(CEPORT); CELL[nrow,2] = cet; CELL[nrow,3] = cer; CELL[nrow,4] = cev
if (SIDE != "" && SIDE != "/dev/null" && haveT && haveR)
printf "CE %.0f %.0f\n", cetv, cerv > SIDE
}
if (TSV) {
line = HDR[1]
for (c = 2; c <= NC; c++) line = line "\t" HDR[c]
@@ -603,13 +816,103 @@ _tl_pair_report() {
printf "# pairs reported : %d\n", nrep
printf "# %s %d %s %d %s %d (tolerance %d)\n", \
vc("PASS"), npass, vc("FAIL"), nfail, vc("NA"), nna, TOL + 0
if (CEPORT != "" && ceunit != "")
printf "# %s TX/RX are %s (MIB_%s/MIB_%s); the cd rows are packets\n", \
CEPORT, ceunit, \
(ceunit == "bytes" ? "TBYT" : "TPOK"), \
(ceunit == "bytes" ? "RBYT" : "RPOK")
if (cev == "DEFER")
printf "# %s is judged across units -- see the summary at the end\n", CEPORT
# every NA pair is a visible row -> no long "no counters" list needed
for (i = 1; i <= nf; i++) print redl(FL[i])
}
if (SIDE != "" && SIDE != "/dev/null")
printf "SUM %d %d %d\n", npass, nfail, nna > SIDE
exit (nfail || nna) ? 2 : 0
}' "$log"
}
# _tl_ce_summary -- the cross-unit ce0 verdict + the per-unit totals.
# Printed once, at the very bottom, after every unit's table.
# Args: <stamp> (side files are $TL_LOG_DIR/tlside_unit<N>_<stamp>)
# Returns 0 all PASS, 2 any FAIL/NA, 3 could not be decided.
_tl_ce_summary() {
local stamp="$1" unit side c g y n r
c=$'\033[36m'; g=$'\033[32m'; y=$'\033[33m'; r=$'\033[31m'; n=$'\033[0m'
case "$TL_COLOR" in
never|0|no) c=""; g=""; y=""; r=""; n="" ;;
always|1|yes) ;;
*) [ -t 1 ] || { c=""; g=""; y=""; r=""; n=""; } ;;
esac
local u tx rx pass fail na have=""
local -A CETX CERX UPASS UFAIL UNA
for unit in $TL_UNITS; do
side="$TL_LOG_DIR/tlside_unit${unit}_${stamp}"
[ -r "$side" ] || continue
while read -r tag a b cc; do
case "$tag" in
CE) CETX[$unit]="$a"; CERX[$unit]="$b" ;;
SUM) UPASS[$unit]="$a"; UFAIL[$unit]="$b"; UNA[$unit]="$cc" ;;
esac
done < "$side"
have="$have $unit"
done
echo ""
echo "===== summary : all units ====="
printf '%-8s %8s %8s %8s %s\n' "Unit" "PASS" "FAIL" "NA" "RESULT"
local worst=0 v
for unit in $have; do
pass="${UPASS[$unit]:-0}"; fail="${UFAIL[$unit]:-0}"; na="${UNA[$unit]:-0}"
if [ "$fail" -gt 0 ] || [ "$na" -gt 0 ]; then v="${r}FAIL${n}"; worst=2
else v="${g}PASS${n}"; fi
printf '%-8s %8s %8s %8s %b\n' "unit $unit" "$pass" "$fail" "$na" "$v"
done
[ "$TL_CE_ENABLE" = "1" ] || { echo ""; return "$worst"; }
echo ""
echo "----- ${TL_CE_PORT} (100G uplink, VLAN ${TL_CE_VLAN}, mode=${TL_CE_MODE}, counter=${TL_CE_COUNTER}) -----"
if [ "$TL_CE_MODE" != "cross" ]; then
echo "# mode=self: the verdict is in each unit's table above"
echo ""
return "$worst"
fi
# cross mode needs both units' counters
if [ -z "${CETX[0]}" ] || [ -z "${CETX[1]}" ]; then
printf '%b\n' "${y}UNDECIDED${n} ${TL_CE_PORT} is a cross-unit check and needs unit 0 AND unit 1;"
echo " this run had TL_UNITS=\"$TL_UNITS\" (counters seen for:${have:-none})."
echo " Re-run with -u all, or set TL_CE_MODE=self if the cabling is a self loopback."
echo ""
[ "$worst" -lt 3 ] && worst=3
return "$worst"
fi
local cu="bytes"; [ "$TL_CE_COUNTER" = "packets" ] && cu="packets"
printf '%-22s %18s %18s\n' "Direction" "TX ($cu)" "RX ($cu)"
printf '%-22s %18s %18s\n' "unit0.${TL_CE_PORT}" "${CETX[0]}" "${CERX[0]}"
printf '%-22s %18s %18s\n' "unit1.${TL_CE_PORT}" "${CETX[1]}" "${CERX[1]}"
local d1 d2 v1 v2
d1=$(awk -v a="${CETX[0]}" -v b="${CERX[1]}" 'BEGIN{printf "%.0f", a-b}')
d2=$(awk -v a="${CETX[1]}" -v b="${CERX[0]}" 'BEGIN{printf "%.0f", a-b}')
v1=$(awk -v d="$d1" -v t="$TL_TOLERANCE" 'BEGIN{print (d<0?-d:d)<=t ? "PASS" : "FAIL"}')
v2=$(awk -v d="$d2" -v t="$TL_TOLERANCE" 'BEGIN{print (d<0?-d:d)<=t ? "PASS" : "FAIL"}')
echo ""
printf 'unit0.TX -> unit1.RX delta %+d %b\n' "$d1" "$([ "$v1" = PASS ] && echo "${g}PASS${n}" || echo "${r}FAIL${n}")"
printf 'unit1.TX -> unit0.RX delta %+d %b\n' "$d2" "$([ "$v2" = PASS ] && echo "${g}PASS${n}" || echo "${r}FAIL${n}")"
if [ "$v1" = PASS ] && [ "$v2" = PASS ]; then
printf '%-22s %b\n' "${TL_CE_PORT} RESULT" "${g}PASS${n}"
else
printf '%-22s %b\n' "${TL_CE_PORT} RESULT" "${r}FAIL${n}"
worst=2
fi
echo ""
return "$worst"
}
# traffic_linespeed_report -- 'show c' per unit, keep the raw log, render the table
traffic_linespeed_report() {
local unit log rc worst=0 stamp
@@ -628,14 +931,17 @@ traffic_linespeed_report() {
fi
stamp=$(date +%Y%m%d_%H%M%S 2>/dev/null || echo now)
local side
for unit in $TL_UNITS; do
log="$TL_LOG_DIR/showc_unit${unit}_${stamp}.log"
side="$TL_LOG_DIR/tlside_unit${unit}_${stamp}"
: > "$side"
if ! _tl_bcm "$unit" "show c" > "$log" 2>&1; then
_tl_err "unit $unit: show c failed (see $log)"; return 1
fi
[ "$TL_REPORT_RAW" = "1" ] && { echo "----- unit $unit : raw show c -----"; cat "$log"; }
echo "===== unit $unit : loopback pair counter report (raw: $log) ====="
_tl_pair_report "$log"; rc=$?
_tl_pair_report "$log" "$side"; rc=$?
[ "$rc" -gt "$worst" ] && worst=$rc
case "$rc" in
0) _tl_ok "unit $unit: all pairs PASS" ;;
@@ -643,6 +949,12 @@ traffic_linespeed_report() {
*) _tl_err "unit $unit: report parse error" ;;
esac
done
# Summary last, after every unit's table -- this is where the cross-unit
# ce0 verdict can finally be decided.
_tl_ce_summary "$stamp"; rc=$?
[ "$rc" -gt "$worst" ] && worst=$rc
rm -f "$TL_LOG_DIR"/tlside_unit*_"${stamp}"
return "$worst"
}
@@ -662,17 +974,22 @@ traffic_linespeed_run() {
blanton_traffic_linespeed_help() {
echo -e "\033[1mblanton_traffic_linespeed.sh - SWB loopback line-speed traffic (bcmcmd)\033[0m"
echo ""
echo -e " Units: \033[36m$TL_UNITS\033[0m tx: \033[36m$TL_TX_COUNT pkt x ${TL_TX_LENGTH}B\033[0m"
echo -e " Units: \033[36m$TL_UNITS\033[0m tx: \033[36m$TL_TX_COUNT pkt x ${TL_TX_LENGTH}B\033[0m PatternRandom: \033[36m${TL_TX_RANDOM:-（不加）}\033[0m"
echo -e " VLANs: 30..137 ($(_tl_pair_count) loopback pairs, cdN <-> cdN+32)"
[ "$TL_CE_ENABLE" = "1" ] && \
echo -e " 100G : VLAN \033[36m$TL_CE_VLAN\033[0m port \033[36m$TL_CE_PORT\033[0m mode=\033[36m$TL_CE_MODE\033[0m (cross = unit0.$TL_CE_PORT <-> unit1.$TL_CE_PORT cabled)"
echo ""
echo -e "\033[1mSubcommands\033[0m"
echo -e " \033[33minit\033[0m step 1 vlan remove 1 pbm=cd, vlan create/add each pair"
echo -e " \033[33mclear\033[0m step 2 clear c"
echo -e " \033[33mshow\033[0m step 3/6 show c (run before and after traffic)"
echo -e " \033[33mstart\033[0m step 4 tx <count> length=<len> VLantag=<vid> per VLAN"
echo -e " \033[33mstart\033[0m step 4 tx <count> length=<len> VLantag=<vid> [PatternRandom=<yes|no>] per VLAN"
echo -e " \033[33mstop\033[0m step 5 vlan remove <vid> pbm=<pair> [--destroy also destroys]"
[ "$TL_CE_ENABLE" = "1" ] && [ "$TL_CE_MIRROR" = "1" ] && \
echo -e " \033[33m^ also turns the $TL_CE_PORT mirror off -- without it the 100G loop keeps running\033[0m"
echo -e " \033[33mps\033[0m ps <portlist> port status (link/speed) of the cabled ports"
echo -e " \033[33mreport\033[0m show c -> per-port TX/RX per pair + PASS/FAIL/NA cross-check"
echo -e " ${TL_CE_PORT} is the last row (DEFER), judged in the summary at the bottom"
echo -e " \033[33mrun\033[0m ps -> init -> clear -> start -> report"
echo -e " \033[33mhelp\033[0m"
echo ""
@@ -680,6 +997,7 @@ blanton_traffic_linespeed_help() {
echo -e " \033[33m-u|--unit\033[0m <0|1|all> bcmcmd unit(s); 'all' = 0 1 (default: $TL_UNITS)"
echo -e " \033[33m-c|--count|-tx\033[0m <n> tx packet count (default $TL_TX_COUNT)"
echo -e " \033[33m-l|--length|-length\033[0m <n> tx packet length (default $TL_TX_LENGTH)"
echo -e " \033[33m-r|--random\033[0m <yes|no> tx PatternRandom (default $TL_TX_RANDOM; \"\" 完全不加)"
echo -e " \033[33m-p|--ports\033[0m <list> ps port list, or 'all' for every port"
echo -e " \033[33m-T|--tolerance\033[0m <n> report: allowed |delta| pkts (default $TL_TOLERANCE; -T 1 = snapshot skew)"
echo -e " \033[33m-a|--all\033[0m report: kept for compatibility (all pairs are listed)"
@@ -703,7 +1021,8 @@ blanton_traffic_linespeed_help() {
echo -e " blanton_traffic_linespeed report -u 1 -q | grep -v PASS"
echo -e " blanton_traffic_linespeed report -f /tmp/showc_unit1_*.log -a"
echo -e " blanton_traffic_linespeed show -u 1 | grep -iE 'error|discard|drop'"
echo -e " blanton_traffic_linespeed start -u 0 -tx 100 -length 512"
echo -e " blanton_traffic_linespeed start -u 0 -tx 200 -length 324"
echo -e " blanton_traffic_linespeed start -r no # 固定樣式，不隨機"
echo -e " blanton_traffic_linespeed start -tx 100000 -length 9216 -d"
echo -e " blanton_traffic_linespeed stop --destroy"
echo ""
@@ -727,6 +1046,7 @@ blanton_traffic_linespeed() {
shift 2 ;;
-c|--count|-tx|--tx) TL_TX_COUNT="$2"; shift 2 ;;
-l|-length|--length|--len) TL_TX_LENGTH="$2"; shift 2 ;;
-r|--random|-PatternRandom|--pattern-random) TL_TX_RANDOM="$2"; shift 2 ;;
-p|--ports) TL_PS_PORTS="$2"; shift 2 ;;
-T|--tolerance) TL_TOLERANCE="$2"; shift 2 ;;
-f|--file) TL_REPORT_FILE="$2"; shift 2 ;;
src/Script_ABC_Blanton/Blanton_Script/blantons_nfc_validate.py
+1338
View File
File diff suppressed because it is too large Load Diff
src/Script_ABC_Blanton/Blanton_Script/bmc_monitor.sh
+344
View File
@@ -0,0 +1,344 @@
#!/bin/bash
###############################################################################
# bmc_monitor.sh
#
# Version : V1.1.0
# Author : ETWen
# Date : 20260820
#
# Purpose : Periodically execute a list of commands on the BMC through
# `bmc-manager run "<cmd>"` from the SONiC host side, and append all
# output to a rotating log file. Designed to run detached in the
# background so no interactive SSH session to the BMC is required.
#
# Notes : - Everything runs on the HOST. Nothing is deployed to the BMC, so
# the BMC busybox toolchain (no base64 / no setsid ...) is a
# non-issue.
# - `bmc-manager run` prints the remote command output on stdout and
# its own banner on stderr; the two streams are captured separately
# so the log stays clean.
#
# Version History
# V1.0.0 20260820 Initial Version
# V1.1.0 20260820 `start` clears the previous log by default
# (START_LOG_MODE: new / archive / append)
###############################################################################
set -u
###############################################################################
# User Configurable Section -- normally this is the only part you need to edit
###############################################################################
# Commands executed on the BMC, one per line, in this order.
# Add a line to add a command; comment it out to disable it.
COMMANDS=(
"free -m"
"i2ctransfer -f -y 1 w6@0x41 0x00 0xC0 0x55 0xAA 0x55 0xAA"
"i2ctransfer -f -y 1 w2@0x41 0x00 0xC0 r4"
"i2ctransfer -f -y 1 w6@0x41 0x00 0xC0 0xAA 0x55 0xAA 0x55"
"i2ctransfer -f -y 1 w2@0x41 0x00 0xC0 r4"
#"uptime"
#"cat /proc/loadavg"
#"cat /proc/meminfo"
#"df -h /tmp"
#"dmesg | tail -n 30"
)
# Seconds to wait after a full round (all COMMANDS executed) before the next one
INTERVAL_SEC=10
# Seconds to wait between two commands inside the same round (0 = no wait)
INTER_CMD_DELAY_SEC=0
# Per-command timeout in seconds; prevents a hung bmc-manager from freezing the
# whole loop. Set to 0 to disable.
CMD_TIMEOUT_SEC=30
# Stop after this many rounds. 0 = run until stopped manually.
MAX_ROUNDS=0
# Command runner. Final invocation is:
# "$RUNNER_BIN" "${RUNNER_ARGS[@]}" "<command string>"
# BMC side : RUNNER_BIN="bmc-manager" ; RUNNER_ARGS=(run)
# BMC by IP : RUNNER_BIN="bmc-manager" ; RUNNER_ARGS=(--ip 192.168.200.200 run)
# Host side : RUNNER_BIN="bash" ; RUNNER_ARGS=(-c)
RUNNER_BIN="bmc-manager"
RUNNER_ARGS=(run)
# stderr handling of the runner (bmc-manager banner lives here)
# 0 = log stderr only when the command fails (recommended, keeps log clean)
# 1 = always log stderr
LOG_STDERR=0
# Logging
LOG_DIR="" # empty = <script directory>/log
LOG_NAME="bmc_poll.log"
MAX_LOG_SIZE_MB=100 # rotate above this size; 0 = never rotate
MAX_LOG_KEEP=5 # keep .1 .. .N
# What `start` does with the log left behind by the previous run:
# new = begin with an empty log; previous content and rotated copies are
# discarded (default -- one run, one log)
# archive = rename the previous log to <log>.YYYYmmdd-HHMMSS, then begin empty
# append = keep appending to the existing log
START_LOG_MODE="new"
###############################################################################
# Internal
###############################################################################
SCRIPT_NAME="$(basename -- "${BASH_SOURCE[0]}")"
SCRIPT_PATH="$(cd -- "$(dirname -- "${BASH_SOURCE[0]}")" && pwd)/${SCRIPT_NAME}"
[ -n "${LOG_DIR}" ] || LOG_DIR="$(dirname -- "${SCRIPT_PATH}")/log"
LOG_FILE="${LOG_DIR}/${LOG_NAME}"
PID_FILE="${LOG_DIR}/${LOG_NAME%.log}.pid"
LOG_TO_FILE=0
STOP=0
SLEEP_PID=""
ts() { date '+%Y-%m-%d %H:%M:%S'; }
die() { printf '[ERROR] %s\n' "$*" >&2; exit 1; }
on_signal() {
STOP=1
[ -n "${SLEEP_PID}" ] && kill "${SLEEP_PID}" 2>/dev/null
}
# sleep that can be aborted immediately by SIGTERM/SIGINT
interruptible_sleep() {
local sec="$1"
[ "${sec}" -gt 0 ] 2>/dev/null || return 0
sleep "${sec}" &
SLEEP_PID=$!
wait "${SLEEP_PID}" 2>/dev/null
SLEEP_PID=""
}
# echo the pid and return 0 when a live instance is found
is_running() {
local pid
[ -f "${PID_FILE}" ] || return 1
pid="$(cat "${PID_FILE}" 2>/dev/null)"
[[ "${pid}" =~ ^[0-9]+$ ]] || return 1
kill -0 "${pid}" 2>/dev/null || return 1
grep -qa "${SCRIPT_NAME}" "/proc/${pid}/cmdline" 2>/dev/null || return 1
printf '%s' "${pid}"
return 0
}
rotate_log_if_needed() {
local max_bytes size i
[ "${LOG_TO_FILE}" -eq 1 ] || return 0
[ "${MAX_LOG_SIZE_MB}" -gt 0 ] || return 0
[ -f "${LOG_FILE}" ] || return 0
max_bytes=$(( MAX_LOG_SIZE_MB * 1024 * 1024 ))
size="$(stat -c %s "${LOG_FILE}" 2>/dev/null || echo 0)"
[ "${size}" -ge "${max_bytes}" ] || return 0
for (( i = MAX_LOG_KEEP - 1; i >= 1; i-- )); do
[ -f "${LOG_FILE}.${i}" ] && mv -f "${LOG_FILE}.${i}" "${LOG_FILE}.$(( i + 1 ))"
done
mv -f "${LOG_FILE}" "${LOG_FILE}.1"
exec >>"${LOG_FILE}" 2>&1 # re-bind stdout/stderr to the new file
printf '[%s] INFO : log rotated at %s MB\n' "$(ts)" "${MAX_LOG_SIZE_MB}"
}
# Remove the rotated copies (.1 .. .N) only. Timestamped archives are kept.
remove_rotated_logs() {
local i
for (( i = 1; i <= MAX_LOG_KEEP + 1; i++ )); do
rm -f "${LOG_FILE}.${i}"
done
}
# Apply START_LOG_MODE just before a background run is launched.
prepare_log_on_start() {
local stamp
case "${START_LOG_MODE}" in
append)
return 0
;;
archive)
if [ -s "${LOG_FILE}" ]; then
stamp="$(date '+%Y%m%d-%H%M%S')"
mv -f "${LOG_FILE}" "${LOG_FILE}.${stamp}" \
|| die "cannot archive ${LOG_FILE}"
printf 'previous log archived: %s.%s\n' "${LOG_FILE}" "${stamp}"
fi
remove_rotated_logs
;;
new)
# Truncate rather than unlink: the inode is preserved, so a `tail -f`
# that is already attached keeps following the new run.
if [ -f "${LOG_FILE}" ]; then
: > "${LOG_FILE}" || die "cannot truncate ${LOG_FILE}"
fi
remove_rotated_logs
;;
*)
die "invalid START_LOG_MODE: ${START_LOG_MODE}"
;;
esac
}
run_one_command() {
local cmd="$1"
local out err rc t0 elapsed err_file
err_file="$(mktemp)"
t0=${SECONDS}
if [ "${CMD_TIMEOUT_SEC}" -gt 0 ]; then
out="$(timeout "${CMD_TIMEOUT_SEC}" \
"${RUNNER_BIN}" "${RUNNER_ARGS[@]}" "${cmd}" 2>"${err_file}")"
else
out="$("${RUNNER_BIN}" "${RUNNER_ARGS[@]}" "${cmd}" 2>"${err_file}")"
fi
rc=$?
elapsed=$(( SECONDS - t0 ))
err="$(cat "${err_file}" 2>/dev/null)"
rm -f "${err_file}"
printf '===== [%s] CMD: %s | rc=%d | %ds =====\n' "$(ts)" "${cmd}" "${rc}" "${elapsed}"
printf '%s\n' "${out}"
if [ "${rc}" -eq 124 ]; then
printf '[%s] WARN : timeout after %ds\n' "$(ts)" "${CMD_TIMEOUT_SEC}"
fi
if [ -n "${err}" ] && { [ "${LOG_STDERR}" -eq 1 ] || [ "${rc}" -ne 0 ]; }; then
printf -- '--- stderr ---\n%s\n' "${err}"
fi
printf '\n'
}
main_loop() {
local round=0 cmd
[ "${#COMMANDS[@]}" -gt 0 ] || die "COMMANDS is empty"
command -v "${RUNNER_BIN}" >/dev/null 2>&1 || die "runner not found: ${RUNNER_BIN}"
trap on_signal INT TERM
printf '#############################################################\n'
printf '[%s] START: pid=%d interval=%ds timeout=%ds cmds=%d\n' \
"$(ts)" "$$" "${INTERVAL_SEC}" "${CMD_TIMEOUT_SEC}" "${#COMMANDS[@]}"
printf '#############################################################\n'
while [ "${STOP}" -eq 0 ]; do
round=$(( round + 1 ))
printf -- '---------- ROUND %d @ %s ----------\n' "${round}" "$(ts)"
for cmd in "${COMMANDS[@]}"; do
[ "${STOP}" -eq 0 ] || break
run_one_command "${cmd}"
[ "${INTER_CMD_DELAY_SEC}" -gt 0 ] && interruptible_sleep "${INTER_CMD_DELAY_SEC}"
done
rotate_log_if_needed
if [ "${MAX_ROUNDS}" -gt 0 ] && [ "${round}" -ge "${MAX_ROUNDS}" ]; then
break
fi
# Fixed gap between rounds. For a fixed cadence instead, replace with:
# interruptible_sleep $(( INTERVAL_SEC - round_elapsed ))
[ "${STOP}" -eq 0 ] && interruptible_sleep "${INTERVAL_SEC}"
done
printf '[%s] STOP : pid=%d after %d round(s)\n' "$(ts)" "$$" "${round}"
}
###############################################################################
# Sub-commands
###############################################################################
do_start() {
local pid
pid="$(is_running)" && die "already running (pid=${pid})"
mkdir -p "${LOG_DIR}" || die "cannot create ${LOG_DIR}"
prepare_log_on_start
if command -v setsid >/dev/null 2>&1; then
setsid "${SCRIPT_PATH}" __daemon >/dev/null 2>&1 &
else
nohup "${SCRIPT_PATH}" __daemon >/dev/null 2>&1 &
disown 2>/dev/null
fi
sleep 1
pid="$(is_running)" || die "start failed, check ${LOG_FILE}"
printf 'started (pid=%s)\nlog: %s\n' "${pid}" "${LOG_FILE}"
}
do_daemon() {
mkdir -p "${LOG_DIR}" || die "cannot create ${LOG_DIR}"
LOG_TO_FILE=1
exec >>"${LOG_FILE}" 2>&1
printf '%d\n' "$$" > "${PID_FILE}"
trap 'rm -f "${PID_FILE}"' EXIT
main_loop
}
do_stop() {
local pid i
pid="$(is_running)" || { printf 'not running\n'; rm -f "${PID_FILE}"; return 0; }
kill -TERM -"${pid}" 2>/dev/null || kill -TERM "${pid}" 2>/dev/null
for (( i = 0; i < 20; i++ )); do
kill -0 "${pid}" 2>/dev/null || break
sleep 0.5
done
if kill -0 "${pid}" 2>/dev/null; then
printf 'SIGTERM ignored, sending SIGKILL\n'
kill -KILL -"${pid}" 2>/dev/null || kill -KILL "${pid}" 2>/dev/null
fi
rm -f "${PID_FILE}"
printf 'stopped (pid=%s)\n' "${pid}"
}
do_status() {
local pid
if pid="$(is_running)"; then
printf 'status : running (pid=%s)\n' "${pid}"
else
printf 'status : stopped\n'
fi
printf 'log : %s\n' "${LOG_FILE}"
[ -f "${LOG_FILE}" ] && printf 'size : %s\n' "$(du -h "${LOG_FILE}" | cut -f1)"
printf 'cmds : %d, interval=%ds\n' "${#COMMANDS[@]}" "${INTERVAL_SEC}"
}
usage() {
cat <<EOF
Usage: ${SCRIPT_NAME} {start|stop|status|fg|tail|clear}
start Run detached in the background; the previous log is discarded first
(see START_LOG_MODE)
stop Stop the background instance
status Show pid / log path / log size
fg Run in the foreground, output to the terminal (for a quick check)
tail tail -f the log file
clear Remove the log file and all rotated copies (must be stopped first)
Log file : ${LOG_FILE}
To add a command, edit the COMMANDS array at the top of this script.
EOF
}
###############################################################################
# Entry point
###############################################################################
case "${1:-}" in
start) do_start ;;
stop) do_stop ;;
status) do_status ;;
fg) LOG_TO_FILE=0; main_loop ;;
tail) tail -n 50 -f "${LOG_FILE}" ;;
clear)
is_running >/dev/null && die "still running, stop it first"
rm -f "${LOG_FILE}" "${LOG_FILE}".[0-9]*
printf 'log cleared\n'
;;
__daemon) do_daemon ;;
-h|--help|"") usage ;;
*) printf '[ERROR] unknown sub-command: %s\n\n' "$1" >&2; usage; exit 1 ;;
esac
src/Script_ABC_Blanton/Blanton_Script/bmc_monitor_ddr.sh
+340
View File
@@ -0,0 +1,340 @@
#!/bin/bash
###############################################################################
# bmc_monitor_ddr.sh
#
# Version : V1.1.0
# Author : ETWen
# Date : 20260820
#
# Purpose : Periodically execute a list of commands on the BMC through
# `bmc-manager run "<cmd>"` from the SONiC host side, and append all
# output to a rotating log file. Designed to run detached in the
# background so no interactive SSH session to the BMC is required.
#
# Notes : - Everything runs on the HOST. Nothing is deployed to the BMC, so
# the BMC busybox toolchain (no base64 / no setsid ...) is a
# non-issue.
# - `bmc-manager run` prints the remote command output on stdout and
# its own banner on stderr; the two streams are captured separately
# so the log stays clean.
#
# Version History
# V1.0.0 20260820 Initial Version
# V1.1.0 20260820 `start` clears the previous log by default
# (START_LOG_MODE: new / archive / append)
###############################################################################
set -u
###############################################################################
# User Configurable Section -- normally this is the only part you need to edit
###############################################################################
# Commands executed on the BMC, one per line, in this order.
# Add a line to add a command; comment it out to disable it.
COMMANDS=(
"memtester 500M 1"
#"uptime"
#"cat /proc/loadavg"
#"cat /proc/meminfo"
#"df -h /tmp"
#"dmesg | tail -n 30"
)
# Seconds to wait after a full round (all COMMANDS executed) before the next one
INTERVAL_SEC=5
# Seconds to wait between two commands inside the same round (0 = no wait)
INTER_CMD_DELAY_SEC=0
# Per-command timeout in seconds; prevents a hung bmc-manager from freezing the
# whole loop. Set to 0 to disable.
CMD_TIMEOUT_SEC=3600
# Stop after this many rounds. 0 = run until stopped manually.
MAX_ROUNDS=0
# Command runner. Final invocation is:
# "$RUNNER_BIN" "${RUNNER_ARGS[@]}" "<command string>"
# BMC side : RUNNER_BIN="bmc-manager" ; RUNNER_ARGS=(run)
# BMC by IP : RUNNER_BIN="bmc-manager" ; RUNNER_ARGS=(--ip 192.168.200.200 run)
# Host side : RUNNER_BIN="bash" ; RUNNER_ARGS=(-c)
RUNNER_BIN="bmc-manager"
RUNNER_ARGS=(run)
# stderr handling of the runner (bmc-manager banner lives here)
# 0 = log stderr only when the command fails (recommended, keeps log clean)
# 1 = always log stderr
LOG_STDERR=0
# Logging
LOG_DIR="" # empty = <script directory>/log
LOG_NAME="bmc_ddr.log"
MAX_LOG_SIZE_MB=100 # rotate above this size; 0 = never rotate
MAX_LOG_KEEP=5 # keep .1 .. .N
# What `start` does with the log left behind by the previous run:
# new = begin with an empty log; previous content and rotated copies are
# discarded (default -- one run, one log)
# archive = rename the previous log to <log>.YYYYmmdd-HHMMSS, then begin empty
# append = keep appending to the existing log
START_LOG_MODE="new"
###############################################################################
# Internal
###############################################################################
SCRIPT_NAME="$(basename -- "${BASH_SOURCE[0]}")"
SCRIPT_PATH="$(cd -- "$(dirname -- "${BASH_SOURCE[0]}")" && pwd)/${SCRIPT_NAME}"
[ -n "${LOG_DIR}" ] || LOG_DIR="$(dirname -- "${SCRIPT_PATH}")/log"
LOG_FILE="${LOG_DIR}/${LOG_NAME}"
PID_FILE="${LOG_DIR}/${LOG_NAME%.log}.pid"
LOG_TO_FILE=0
STOP=0
SLEEP_PID=""
ts() { date '+%Y-%m-%d %H:%M:%S'; }
die() { printf '[ERROR] %s\n' "$*" >&2; exit 1; }
on_signal() {
STOP=1
[ -n "${SLEEP_PID}" ] && kill "${SLEEP_PID}" 2>/dev/null
}
# sleep that can be aborted immediately by SIGTERM/SIGINT
interruptible_sleep() {
local sec="$1"
[ "${sec}" -gt 0 ] 2>/dev/null || return 0
sleep "${sec}" &
SLEEP_PID=$!
wait "${SLEEP_PID}" 2>/dev/null
SLEEP_PID=""
}
# echo the pid and return 0 when a live instance is found
is_running() {
local pid
[ -f "${PID_FILE}" ] || return 1
pid="$(cat "${PID_FILE}" 2>/dev/null)"
[[ "${pid}" =~ ^[0-9]+$ ]] || return 1
kill -0 "${pid}" 2>/dev/null || return 1
grep -qa "${SCRIPT_NAME}" "/proc/${pid}/cmdline" 2>/dev/null || return 1
printf '%s' "${pid}"
return 0
}
rotate_log_if_needed() {
local max_bytes size i
[ "${LOG_TO_FILE}" -eq 1 ] || return 0
[ "${MAX_LOG_SIZE_MB}" -gt 0 ] || return 0
[ -f "${LOG_FILE}" ] || return 0
max_bytes=$(( MAX_LOG_SIZE_MB * 1024 * 1024 ))
size="$(stat -c %s "${LOG_FILE}" 2>/dev/null || echo 0)"
[ "${size}" -ge "${max_bytes}" ] || return 0
for (( i = MAX_LOG_KEEP - 1; i >= 1; i-- )); do
[ -f "${LOG_FILE}.${i}" ] && mv -f "${LOG_FILE}.${i}" "${LOG_FILE}.$(( i + 1 ))"
done
mv -f "${LOG_FILE}" "${LOG_FILE}.1"
exec >>"${LOG_FILE}" 2>&1 # re-bind stdout/stderr to the new file
printf '[%s] INFO : log rotated at %s MB\n' "$(ts)" "${MAX_LOG_SIZE_MB}"
}
# Remove the rotated copies (.1 .. .N) only. Timestamped archives are kept.
remove_rotated_logs() {
local i
for (( i = 1; i <= MAX_LOG_KEEP + 1; i++ )); do
rm -f "${LOG_FILE}.${i}"
done
}
# Apply START_LOG_MODE just before a background run is launched.
prepare_log_on_start() {
local stamp
case "${START_LOG_MODE}" in
append)
return 0
;;
archive)
if [ -s "${LOG_FILE}" ]; then
stamp="$(date '+%Y%m%d-%H%M%S')"
mv -f "${LOG_FILE}" "${LOG_FILE}.${stamp}" \
|| die "cannot archive ${LOG_FILE}"
printf 'previous log archived: %s.%s\n' "${LOG_FILE}" "${stamp}"
fi
remove_rotated_logs
;;
new)
# Truncate rather than unlink: the inode is preserved, so a `tail -f`
# that is already attached keeps following the new run.
if [ -f "${LOG_FILE}" ]; then
: > "${LOG_FILE}" || die "cannot truncate ${LOG_FILE}"
fi
remove_rotated_logs
;;
*)
die "invalid START_LOG_MODE: ${START_LOG_MODE}"
;;
esac
}
run_one_command() {
local cmd="$1"
local out err rc t0 elapsed err_file
err_file="$(mktemp)"
t0=${SECONDS}
if [ "${CMD_TIMEOUT_SEC}" -gt 0 ]; then
out="$(timeout "${CMD_TIMEOUT_SEC}" \
"${RUNNER_BIN}" "${RUNNER_ARGS[@]}" "${cmd}" 2>"${err_file}")"
else
out="$("${RUNNER_BIN}" "${RUNNER_ARGS[@]}" "${cmd}" 2>"${err_file}")"
fi
rc=$?
elapsed=$(( SECONDS - t0 ))
err="$(cat "${err_file}" 2>/dev/null)"
rm -f "${err_file}"
printf '===== [%s] CMD: %s | rc=%d | %ds =====\n' "$(ts)" "${cmd}" "${rc}" "${elapsed}"
printf '%s\n' "${out}"
if [ "${rc}" -eq 124 ]; then
printf '[%s] WARN : timeout after %ds\n' "$(ts)" "${CMD_TIMEOUT_SEC}"
fi
if [ -n "${err}" ] && { [ "${LOG_STDERR}" -eq 1 ] || [ "${rc}" -ne 0 ]; }; then
printf -- '--- stderr ---\n%s\n' "${err}"
fi
printf '\n'
}
main_loop() {
local round=0 cmd
[ "${#COMMANDS[@]}" -gt 0 ] || die "COMMANDS is empty"
command -v "${RUNNER_BIN}" >/dev/null 2>&1 || die "runner not found: ${RUNNER_BIN}"
trap on_signal INT TERM
printf '#############################################################\n'
printf '[%s] START: pid=%d interval=%ds timeout=%ds cmds=%d\n' \
"$(ts)" "$$" "${INTERVAL_SEC}" "${CMD_TIMEOUT_SEC}" "${#COMMANDS[@]}"
printf '#############################################################\n'
while [ "${STOP}" -eq 0 ]; do
round=$(( round + 1 ))
printf -- '---------- ROUND %d @ %s ----------\n' "${round}" "$(ts)"
for cmd in "${COMMANDS[@]}"; do
[ "${STOP}" -eq 0 ] || break
run_one_command "${cmd}"
[ "${INTER_CMD_DELAY_SEC}" -gt 0 ] && interruptible_sleep "${INTER_CMD_DELAY_SEC}"
done
rotate_log_if_needed
if [ "${MAX_ROUNDS}" -gt 0 ] && [ "${round}" -ge "${MAX_ROUNDS}" ]; then
break
fi
# Fixed gap between rounds. For a fixed cadence instead, replace with:
# interruptible_sleep $(( INTERVAL_SEC - round_elapsed ))
[ "${STOP}" -eq 0 ] && interruptible_sleep "${INTERVAL_SEC}"
done
printf '[%s] STOP : pid=%d after %d round(s)\n' "$(ts)" "$$" "${round}"
}
###############################################################################
# Sub-commands
###############################################################################
do_start() {
local pid
pid="$(is_running)" && die "already running (pid=${pid})"
mkdir -p "${LOG_DIR}" || die "cannot create ${LOG_DIR}"
prepare_log_on_start
if command -v setsid >/dev/null 2>&1; then
setsid "${SCRIPT_PATH}" __daemon >/dev/null 2>&1 &
else
nohup "${SCRIPT_PATH}" __daemon >/dev/null 2>&1 &
disown 2>/dev/null
fi
sleep 1
pid="$(is_running)" || die "start failed, check ${LOG_FILE}"
printf 'started (pid=%s)\nlog: %s\n' "${pid}" "${LOG_FILE}"
}
do_daemon() {
mkdir -p "${LOG_DIR}" || die "cannot create ${LOG_DIR}"
LOG_TO_FILE=1
exec >>"${LOG_FILE}" 2>&1
printf '%d\n' "$$" > "${PID_FILE}"
trap 'rm -f "${PID_FILE}"' EXIT
main_loop
}
do_stop() {
local pid i
pid="$(is_running)" || { printf 'not running\n'; rm -f "${PID_FILE}"; return 0; }
kill -TERM -"${pid}" 2>/dev/null || kill -TERM "${pid}" 2>/dev/null
for (( i = 0; i < 20; i++ )); do
kill -0 "${pid}" 2>/dev/null || break
sleep 0.5
done
if kill -0 "${pid}" 2>/dev/null; then
printf 'SIGTERM ignored, sending SIGKILL\n'
kill -KILL -"${pid}" 2>/dev/null || kill -KILL "${pid}" 2>/dev/null
fi
rm -f "${PID_FILE}"
printf 'stopped (pid=%s)\n' "${pid}"
}
do_status() {
local pid
if pid="$(is_running)"; then
printf 'status : running (pid=%s)\n' "${pid}"
else
printf 'status : stopped\n'
fi
printf 'log : %s\n' "${LOG_FILE}"
[ -f "${LOG_FILE}" ] && printf 'size : %s\n' "$(du -h "${LOG_FILE}" | cut -f1)"
printf 'cmds : %d, interval=%ds\n' "${#COMMANDS[@]}" "${INTERVAL_SEC}"
}
usage() {
cat <<EOF
Usage: ${SCRIPT_NAME} {start|stop|status|fg|tail|clear}
start Run detached in the background; the previous log is discarded first
(see START_LOG_MODE)
stop Stop the background instance
status Show pid / log path / log size
fg Run in the foreground, output to the terminal (for a quick check)
tail tail -f the log file
clear Remove the log file and all rotated copies (must be stopped first)
Log file : ${LOG_FILE}
To add a command, edit the COMMANDS array at the top of this script.
EOF
}
###############################################################################
# Entry point
###############################################################################
case "${1:-}" in
start) do_start ;;
stop) do_stop ;;
status) do_status ;;
fg) LOG_TO_FILE=0; main_loop ;;
tail) tail -n 50 -f "${LOG_FILE}" ;;
clear)
is_running >/dev/null && die "still running, stop it first"
rm -f "${LOG_FILE}" "${LOG_FILE}".[0-9]*
printf 'log cleared\n'
;;
__daemon) do_daemon ;;
-h|--help|"") usage ;;
*) printf '[ERROR] unknown sub-command: %s\n\n' "$1" >&2; usage; exit 1 ;;
esac
src/Script_ABC_Blanton/Blanton_Script/mgmt_ping_monitor.sh
+403
View File
@@ -0,0 +1,403 @@
#!/bin/bash
###############################################################################
# mgmt_ping_monitor.sh
#
# Version : V3.0.0
# Author : ETWen
# Date : 20260826
#
# Purpose : Ping from BOTH management NICs at the same time, continuously, and
# keep accumulating until stopped:
#
# 10G (eth0) -> TARGET_10G
# 1G (eth1) -> TARGET_1G
#
# `stop` renders a report into the log: the last TAIL_LINES entries
# per NIC, each one's ping statistics and verdict, then
# `ip -s link show` for both interfaces.
#
# Notes : - Both NICs are configured with iproute2 `replace`, which is
# idempotent, and both are left up. On a shared subnet the target's
# ARP can be answered by either NIC, so ARP_STRICT keeps each one
# to its own address.
# - ARP WARM-UP: the first packet after a neighbour entry expires is
# spent resolving ARP and is counted as loss. On the bench this
# produced three FAILs whose only missing packet was icmp_seq=1,
# every time, with zero NIC errors or drops. One discarded ping
# before the measured run removes that artefact, which is what lets
# MAX_LOSS_PCT stay at 0 and still mean something.
# - MANAGEMENT CONNECTIVITY IS IN USE while this runs. Drive it from
# the serial console.
#
# Version History
# V1.0.0 20260824 Initial Version (ifconfig, one NIC at a time)
# V2.0.0 20260824 iproute2; both NICs stay up; per-NIC target;
# ip -s link show + TX/RX delta per leg
# V3.0.0 20260826 Both NICs ping SIMULTANEOUSLY and continuously instead
# of alternating fixed bursts. Add the ARP warm-up.
# `stop` renders last-N per NIC + statistics + both
# ip -s link outputs into the log.
###############################################################################
set -u
###############################################################################
# User Configurable Section -- normally this is the only part you need to edit
###############################################################################
# --- 10G management port ---
IF_10G="eth0"
IP_10G="192.168.1.99"
TARGET_10G="192.168.1.30" # host this NIC pings
PLEN_10G=24 # prefix length, e.g. 24 = /24
GW_10G="" # default gateway; empty = do not touch routing
METRIC_10G=100 # lower metric wins for off-subnet traffic
# --- 1G management port ---
IF_1G="eth1"
IP_1G="192.168.1.101"
TARGET_1G="192.168.1.31"
PLEN_1G=24
GW_1G=""
METRIC_1G=200
# --- ping ---
PING_INTERVAL_SEC=1 # seconds between echo requests (ping -i)
MAX_LOSS_PCT=0 # loss above this marks the NIC FAIL
TAIL_LINES=20 # how many recent entries per NIC the report shows
# Extra ping flags. -D timestamps every line, -O prints a marker for a request
# that got no reply, so a drop is visible in the tail instead of just missing.
# Clear this if the platform's ping does not accept them.
PING_EXTRA_OPTS="-D -O"
# One discarded ping per NIC before the measured run, to resolve ARP. Without
# it the first packet of the run is lost to neighbour resolution and looks
# exactly like a link fault. 0 disables.
ARP_WARMUP=1
ARP_WARMUP_TIMEOUT=2 # seconds to wait for the warm-up reply
# Both NICs stay up. If they share a subnet the target's ARP can be answered by
# either one, so a reply may arrive on the NIC that did not send. This applies
# arp_ignore=1 / arp_announce=2 to both. RAM only -- reverts on reboot.
ARP_STRICT=1
# Prefix for the ip commands; empty because this already runs as root.
SUDO=""
# Seconds to wait after bringing a link up before pinging.
LINK_SETTLE_SEC=5
# Logging
LOG_DIR="" # empty = <script directory>/log
LOG_NAME="mgmt_ping.log"
# What `start` does with the log left behind by the previous run:
# new = discard it (default -- one run, one log)
# archive = rename it to <log>.YYYYmmdd-HHMMSS first
# append = keep it
START_LOG_MODE="new"
###############################################################################
# Internal
###############################################################################
SCRIPT_NAME="$(basename -- "${BASH_SOURCE[0]}")"
SCRIPT_DIR="$(cd -- "$(dirname -- "${BASH_SOURCE[0]}")" && pwd)"
[ -n "${LOG_DIR}" ] || LOG_DIR="${SCRIPT_DIR}/log"
LOG_FILE="${LOG_DIR}/${LOG_NAME}"
BASE="${LOG_DIR}/${LOG_NAME%.log}"
PID_FILE="${BASE}.pid"
STATE_FILE="${BASE}.state"
RAW_10G="${BASE}_${IF_10G}.raw"
RAW_1G="${BASE}_${IF_1G}.raw"
ts() { date '+%Y-%m-%d %H:%M:%S'; }
die() { printf '[ERROR] %s\n' "$*" >&2; exit 1; }
# "<rx_packets> <tx_packets>" for an interface. ip -s link orders the columns
# "bytes packets errors ...", so packets is $2, not $1.
if_counters() {
${SUDO} ip -s link show "$1" 2>/dev/null | awk '
/RX:/ { getline; rx = $2 }
/TX:/ { getline; tx = $2 }
END { printf "%s %s", (rx == "" ? 0 : rx), (tx == "" ? 0 : tx) }'
}
# Bring the NIC up and (re)apply its address and default route.
setup_iface() {
local iface="$1" ipaddr="$2" plen="$3" gw="$4" metric="$5"
${SUDO} ip link set "${iface}" up 2>&1 || return 1
${SUDO} ip address replace "${ipaddr}/${plen}" dev "${iface}" 2>&1 || return 1
if [ -n "${gw}" ]; then
${SUDO} ip route replace default via "${gw}" dev "${iface}" \
metric "${metric}" 2>&1 || return 1
fi
return 0
}
apply_arp_strict() {
local i
[ "${ARP_STRICT}" -eq 1 ] || return 0
for i in "${IF_10G}" "${IF_1G}"; do
${SUDO} sysctl -qw "net.ipv4.conf.${i}.arp_ignore=1" 2>/dev/null
${SUDO} sysctl -qw "net.ipv4.conf.${i}.arp_announce=2" 2>/dev/null
done
}
# Resolve the neighbour so the measured run does not spend its first packet on
# ARP. Result is deliberately discarded.
arp_warmup() {
local iface="$1" target="$2"
[ "${ARP_WARMUP}" -eq 1 ] || return 0
ping -I "${iface}" -c 1 -W "${ARP_WARMUP_TIMEOUT}" "${target}" >/dev/null 2>&1
return 0
}
# echo "pid_10g pid_1g" and return 0 when both are alive
is_running() {
local p0 p1
[ -f "${PID_FILE}" ] || return 1
p0="$(sed -n '1p' "${PID_FILE}" 2>/dev/null)"
p1="$(sed -n '2p' "${PID_FILE}" 2>/dev/null)"
[[ "${p0}" =~ ^[0-9]+$ ]] || return 1
[[ "${p1}" =~ ^[0-9]+$ ]] || return 1
kill -0 "${p0}" 2>/dev/null || kill -0 "${p1}" 2>/dev/null || return 1
printf '%s %s' "${p0}" "${p1}"
return 0
}
###############################################################################
# Report
###############################################################################
# The recent entries for one NIC: replies and, thanks to -O, the requests that
# got none.
tail_entries() {
grep -aE 'bytes from|no answer|Unreachable|Time to live' "$1" 2>/dev/null \
| tail -n "${TAIL_LINES}"
}
# The trailing "--- x ping statistics ---" block.
stats_block() {
sed -n '/ping statistics ---/,$p' "$1" 2>/dev/null
}
# render_leg <label> <iface> <target> <raw> <rx0> <tx0>
render_leg() {
local label="$1" iface="$2" target="$3" raw="$4" rx0="$5" tx0="$6"
local st tx rx loss avg verdict c1 rx1 tx1 drx dtx
printf -- '----- %s : %s -> %s : last %s entries -----\n' \
"${label}" "${iface}" "${target}" "${TAIL_LINES}"
tail_entries "${raw}"
printf '\n'
st="$(stats_block "${raw}")"
printf '%s\n' "${st}"
tx="$(printf '%s' "${st}" | sed -n 's/^\([0-9]\+\) packets transmitted.*/\1/p' | tail -1)"
rx="$(printf '%s' "${st}" | sed -n 's/.*[, ]\([0-9]\+\) received.*/\1/p' | tail -1)"
loss="$(printf '%s' "${st}" | sed -n 's/.*[, ]\([0-9]\+\)% packet loss.*/\1/p' | tail -1)"
avg="$(printf '%s' "${st}" | sed -n 's|.*= [0-9.]*/\([0-9.]*\)/.*|\1|p' | tail -1)"
[ -n "${tx}" ] || tx=0
[ -n "${rx}" ] || rx=0
[ -n "${loss}" ] || loss=100
[ -n "${avg}" ] || avg="-"
c1="$(if_counters "${iface}")"; rx1="${c1% *}"; tx1="${c1#* }"
drx=$(( rx1 - rx0 )); dtx=$(( tx1 - tx0 ))
if [ "${loss}" -le "${MAX_LOSS_PCT}" ] && [ "${tx}" -gt 0 ]; then
verdict="PASS"
else
verdict="FAIL"
fi
# nic_tx/nic_rx are this interface's own counter delta over the whole run.
# A pass with nic_tx near zero means the traffic left on the other NIC.
printf '[%s] RESULT %-3s %-6s -> %-15s tx=%s rx=%s loss=%s%% rtt_avg=%sms nic_tx=%s nic_rx=%s %s\n\n' \
"$(ts)" "${label}" "${iface}" "${target}" "${tx}" "${rx}" "${loss}" "${avg}" \
"${dtx}" "${drx}" "${verdict}"
}
write_report() {
local rx0_10g tx0_10g rx0_1g tx0_1g started
started="$(sed -n '1p' "${STATE_FILE}" 2>/dev/null)"
rx0_10g="$(sed -n '2p' "${STATE_FILE}" 2>/dev/null)"; rx0_10g="${rx0_10g:-0}"
tx0_10g="$(sed -n '3p' "${STATE_FILE}" 2>/dev/null)"; tx0_10g="${tx0_10g:-0}"
rx0_1g="$(sed -n '4p' "${STATE_FILE}" 2>/dev/null)"; rx0_1g="${rx0_1g:-0}"
tx0_1g="$(sed -n '5p' "${STATE_FILE}" 2>/dev/null)"; tx0_1g="${tx0_1g:-0}"
{
printf '#############################################################\n'
printf '[%s] mgmt ping report\n' "$(ts)"
printf ' started : %s\n' "${started:-unknown}"
printf ' stopped : %s\n' "$(ts)"
printf ' 10G : %s %s/%s -> %s (metric %s)\n' \
"${IF_10G}" "${IP_10G}" "${PLEN_10G}" "${TARGET_10G}" "${METRIC_10G}"
printf ' 1G : %s %s/%s -> %s (metric %s)\n' \
"${IF_1G}" "${IP_1G}" "${PLEN_1G}" "${TARGET_1G}" "${METRIC_1G}"
printf ' ping : -i %s %s, max loss %s%%\n' \
"${PING_INTERVAL_SEC}" "${PING_EXTRA_OPTS}" "${MAX_LOSS_PCT}"
printf '#############################################################\n\n'
render_leg "10G" "${IF_10G}" "${TARGET_10G}" "${RAW_10G}" "${rx0_10g}" "${tx0_10g}"
render_leg "1G" "${IF_1G}" "${TARGET_1G}" "${RAW_1G}" "${rx0_1g}" "${tx0_1g}"
printf -- '--- ip -s link show %s ---\n' "${IF_10G}"
${SUDO} ip -s link show "${IF_10G}" 2>&1
printf '\n'
printf -- '--- ip -s link show %s ---\n' "${IF_1G}"
${SUDO} ip -s link show "${IF_1G}" 2>&1
} >> "${LOG_FILE}"
}
###############################################################################
# Sub-commands
###############################################################################
prepare_log_on_start() {
local stamp
case "${START_LOG_MODE}" in
append) return 0 ;;
archive)
if [ -s "${LOG_FILE}" ]; then
stamp="$(date '+%Y%m%d-%H%M%S')"
mv -f "${LOG_FILE}" "${LOG_FILE}.${stamp}" || die "cannot archive ${LOG_FILE}"
printf 'previous log archived: %s.%s\n' "${LOG_FILE}" "${stamp}"
fi
;;
new)
# Truncate rather than unlink, so a tail -f already attached keeps
# following the new run.
[ -f "${LOG_FILE}" ] && { : > "${LOG_FILE}" || die "cannot truncate ${LOG_FILE}"; }
;;
*) die "invalid START_LOG_MODE: ${START_LOG_MODE}" ;;
esac
}
do_start() {
local pids p0 p1 c
pids="$(is_running)" && die "already running (pids=${pids})"
command -v ip >/dev/null 2>&1 || die "ip (iproute2) not found"
command -v ping >/dev/null 2>&1 || die "ping not found"
mkdir -p "${LOG_DIR}" || die "cannot create ${LOG_DIR}"
prepare_log_on_start
: > "${RAW_10G}"
: > "${RAW_1G}"
setup_iface "${IF_10G}" "${IP_10G}" "${PLEN_10G}" "${GW_10G}" "${METRIC_10G}" \
|| die "cannot configure ${IF_10G}"
setup_iface "${IF_1G}" "${IP_1G}" "${PLEN_1G}" "${GW_1G}" "${METRIC_1G}" \
|| die "cannot configure ${IF_1G}"
apply_arp_strict
sleep "${LINK_SETTLE_SEC}"
# Spend the ARP resolution here, not on the first measured packet.
arp_warmup "${IF_10G}" "${TARGET_10G}"
arp_warmup "${IF_1G}" "${TARGET_1G}"
# Counter baseline, taken after the warm-up so its packets are excluded.
{ c="$(if_counters "${IF_10G}")"
printf '%s\n%s\n%s\n' "$(ts)" "${c% *}" "${c#* }"
c="$(if_counters "${IF_1G}")"
printf '%s\n%s\n' "${c% *}" "${c#* }"
} > "${STATE_FILE}"
# Both NICs ping at the same time and keep accumulating until stopped.
nohup ping -I "${IF_10G}" -i "${PING_INTERVAL_SEC}" ${PING_EXTRA_OPTS} \
"${TARGET_10G}" >> "${RAW_10G}" 2>&1 &
p0=$!
nohup ping -I "${IF_1G}" -i "${PING_INTERVAL_SEC}" ${PING_EXTRA_OPTS} \
"${TARGET_1G}" >> "${RAW_1G}" 2>&1 &
p1=$!
disown "${p0}" 2>/dev/null
disown "${p1}" 2>/dev/null
printf '%s\n%s\n' "${p0}" "${p1}" > "${PID_FILE}"
sleep 1
kill -0 "${p0}" 2>/dev/null || die "10G ping failed to start, see ${RAW_10G}"
kill -0 "${p1}" 2>/dev/null || die "1G ping failed to start, see ${RAW_1G}"
printf 'started (10G pid=%s, 1G pid=%s)\nlog: %s\n' "${p0}" "${p1}" "${LOG_FILE}"
}
do_stop() {
local pids p0 p1 i
pids="$(is_running)" || {
printf 'not running\n'
rm -f "${PID_FILE}"
return 0
}
p0="${pids% *}"; p1="${pids#* }"
# SIGINT, not SIGTERM: ping prints its statistics block on interrupt, and
# that block is what the report parses.
kill -INT "${p0}" 2>/dev/null
kill -INT "${p1}" 2>/dev/null
for (( i = 0; i < 20; i++ )); do
kill -0 "${p0}" 2>/dev/null || kill -0 "${p1}" 2>/dev/null || break
sleep 0.5
done
kill -KILL "${p0}" 2>/dev/null
kill -KILL "${p1}" 2>/dev/null
write_report
rm -f "${PID_FILE}"
printf 'stopped (10G pid=%s, 1G pid=%s)\nreport: %s\n' "${p0}" "${p1}" "${LOG_FILE}"
}
do_status() {
local pids
if pids="$(is_running)"; then
printf 'status : running (10G pid=%s, 1G pid=%s)\n' "${pids% *}" "${pids#* }"
else
printf 'status : stopped\n'
fi
printf 'log : %s\n' "${LOG_FILE}"
printf '10G : %s %s/%s -> %s\n' "${IF_10G}" "${IP_10G}" "${PLEN_10G}" "${TARGET_10G}"
printf '1G : %s %s/%s -> %s\n' "${IF_1G}" "${IP_1G}" "${PLEN_1G}" "${TARGET_1G}"
[ -f "${RAW_10G}" ] && printf '10G recv: %s\n' "$(grep -ac 'bytes from' "${RAW_10G}")"
[ -f "${RAW_1G}" ] && printf '1G recv: %s\n' "$(grep -ac 'bytes from' "${RAW_1G}")"
}
usage() {
cat <<EOF
Usage: ${SCRIPT_NAME} {start|stop|status|summary|clear}
start Configure both NICs, warm up ARP, then ping from BOTH at the same
time and keep accumulating. The previous log is discarded first.
stop Stop both pings and render the report into the log
status Show pids, configured NICs and replies received so far
summary Print just the RESULT lines from the log
clear Remove the log and the raw captures (must be stopped first)
Log file : ${LOG_FILE}
The report holds, per NIC, the last ${TAIL_LINES} entries and the ping
statistics, then "ip -s link show" for both interfaces.
Both NICs are used at once, so management connectivity is in play -- drive
this from the serial console. Edit the User Configurable Section at the top
to change interfaces, addresses, targets or the ping options.
EOF
}
###############################################################################
# Entry point
###############################################################################
case "${1:-}" in
start) do_start ;;
stop) do_stop ;;
status) do_status ;;
summary) grep -a 'RESULT' "${LOG_FILE}" 2>/dev/null || printf 'no results in %s\n' "${LOG_FILE}" ;;
clear)
is_running >/dev/null && die "still running, stop it first"
rm -f "${LOG_FILE}" "${LOG_FILE}".[0-9]* "${RAW_10G}" "${RAW_1G}" "${STATE_FILE}"
printf 'log cleared\n'
;;
-h|--help|"") usage ;;
*) printf '[ERROR] unknown sub-command: %s\n\n' "$1" >&2; usage; exit 1 ;;
esac
src/Script_ABC_Blanton/Blanton_Script/nfc_polling.sh
+314
View File
@@ -0,0 +1,314 @@
#!/usr/bin/env bash
# =============================================================================
# nfc_polling.sh -- keep reading the NFC tag in the background, and tally it
# =============================================================================
# Version History:
# V1.0.0 2026-08-28 First version. start/stop/status/tail/report/clear/fg,
# wraps blantons_nfc_validate.py. 'report' works while the
# poll is still running.
# =============================================================================
#
# Each round runs blantons_nfc_validate.py once and appends a machine-readable
# verdict line, so 'report' never has to parse the tool's prose:
#
# [2026-08-28 15:04:11] NFC poll #000001 START
# ... the tool's own output ...
# [2026-08-28 15:04:14] NFC poll #000001 RESULT=PASS tag=046F7BD2142290
#
# The verdict comes from the tool's own [PASS] / [FAIL] summary line. If neither
# appears the round is ERROR, not FAIL -- "the tool did not run" and "the tag was
# not read" are different problems and get counted separately.
#
# Usage:
# ./nfc_polling.sh start # background, CLEARS the log first
# ./nfc_polling.sh status # running? pid, rounds so far, log size
# ./nfc_polling.sh tail [n] # last n lines (default 50) -- does NOT follow
# ./nfc_polling.sh report # PASS/FAIL tally; safe to run WHILE polling
# ./nfc_polling.sh stop
# ./nfc_polling.sh clear # delete the log (must be stopped)
# ./nfc_polling.sh fg # run in the foreground, Ctrl-C to stop
#
# Environment overrides:
# NFC_INTERVAL_SEC=10 NFC_TIMEOUT_SEC=60 NFC_MAX_ROUNDS=0 (0 = forever)
# NFC_ARGS="test --debug" NFC_LOG_DIR=<dir> NFC_BIN=<python3>
# =============================================================================
# --- User Configurable Section ----------------------------------------------
NFC_INTERVAL_SEC="${NFC_INTERVAL_SEC:-10}" # gap between rounds
NFC_TIMEOUT_SEC="${NFC_TIMEOUT_SEC:-60}" # kill a round that hangs (0 = never)
NFC_MAX_ROUNDS="${NFC_MAX_ROUNDS:-0}" # 0 = until 'stop'
# Called through python3 on purpose: blantons_nfc_validate.py arrives from git
# (mode 100644) and a Windows/USB copy does not carry the execute bit either, so
# "./blantons_nfc_validate.py" would fail with Permission denied on a fresh DUT.
NFC_PY="${NFC_PY:-python3}"
NFC_SCRIPT_NAME="${NFC_SCRIPT_NAME:-blantons_nfc_validate.py}"
# --debug is kept because that is the output that has been seen on the bench.
# It costs ~1.5 KB per round (~13 MB/day at a 10s interval), which is fine for a
# soak; drop it to "test" if you want a smaller log.
NFC_ARGS="${NFC_ARGS:-test --debug}"
NFC_LOG_DIR="${NFC_LOG_DIR:-}" # empty = <script dir>/log
NFC_LOG_NAME="${NFC_LOG_NAME:-nfc_poll.log}"
# -----------------------------------------------------------------------------
SCRIPT_NAME="$(basename -- "${BASH_SOURCE[0]}")"
SCRIPT_DIR="$(cd -- "$(dirname -- "${BASH_SOURCE[0]}")" && pwd)"
SCRIPT_PATH="${SCRIPT_DIR}/${SCRIPT_NAME}"
NFC_SCRIPT="${NFC_SCRIPT:-${SCRIPT_DIR}/${NFC_SCRIPT_NAME}}"
[ -n "${NFC_LOG_DIR}" ] || NFC_LOG_DIR="${SCRIPT_DIR}/log"
LOG_FILE="${NFC_LOG_DIR}/${NFC_LOG_NAME}"
PID_FILE="${NFC_LOG_DIR}/${NFC_LOG_NAME%.log}.pid"
STOP=0
SLEEP_PID=""
ts() { date '+%Y-%m-%d %H:%M:%S'; }
die() { printf '[ERROR] %s\n' "$*" >&2; exit 1; }
on_signal() {
STOP=1
[ -n "${SLEEP_PID}" ] && kill "${SLEEP_PID}" 2>/dev/null
return 0
}
# sleep that a signal can cut short, so 'stop' does not wait out the interval
interruptible_sleep() {
local sec="$1"
[ "${sec}" -le 0 ] 2>/dev/null && return 0
sleep "${sec}" &
SLEEP_PID=$!
wait "${SLEEP_PID}" 2>/dev/null
SLEEP_PID=""
return 0
}
is_running() {
local pid
[ -f "${PID_FILE}" ] || return 1
pid="$(cat "${PID_FILE}" 2>/dev/null)"
[ -n "${pid}" ] || return 1
kill -0 "${pid}" 2>/dev/null || return 1
printf '%s' "${pid}"
return 0
}
# --- one round ---------------------------------------------------------------
# Appends START, the tool output, then a RESULT line. Everything about a round
# lands in the log even when the tool dies, so 'report' can still account for it.
run_one_round() {
local n="$1" out rc verdict tag reason
printf '[%s] NFC poll #%06d START\n' "$(ts)" "${n}"
if [ -n "${NFC_TIMEOUT_SEC}" ] && [ "${NFC_TIMEOUT_SEC}" -gt 0 ] 2>/dev/null \
&& command -v timeout >/dev/null 2>&1; then
out="$(timeout "${NFC_TIMEOUT_SEC}" "${NFC_PY}" "${NFC_SCRIPT}" ${NFC_ARGS} 2>&1)"; rc=$?
else
out="$("${NFC_PY}" "${NFC_SCRIPT}" ${NFC_ARGS} 2>&1)"; rc=$?
fi
printf '%s\n' "${out}"
# The tool's own summary decides. Exit status is only the fallback, because
# a tool that never printed a summary did not measure anything.
if printf '%s\n' "${out}" | grep -q '^\[PASS\]'; then
verdict="PASS"
elif printf '%s\n' "${out}" | grep -q '^\[FAIL\]'; then
verdict="FAIL"
elif [ "${rc}" -eq 124 ]; then
verdict="ERROR"; reason="round exceeded NFC_TIMEOUT_SEC=${NFC_TIMEOUT_SEC}s"
else
verdict="ERROR"; reason="no [PASS]/[FAIL] summary, exit=${rc}"
fi
tag="$(printf '%s\n' "${out}" | sed -n 's/.*NFCID1=\([0-9A-Fa-f]*\).*/\1/p' | tail -1)"
[ -n "${reason}" ] || reason="$(printf '%s\n' "${out}" | grep -m1 '^\[\(PASS\|FAIL\)\]' | cut -c8-)"
printf '[%s] NFC poll #%06d RESULT=%s tag=%s reason=%s\n' \
"$(ts)" "${n}" "${verdict}" "${tag:--}" "${reason:--}"
}
main_loop() {
local n=0
trap on_signal INT TERM
printf '[%s] ===== nfc_polling start : %s %s (interval %ss) =====\n' \
"$(ts)" "${NFC_PY}" "${NFC_SCRIPT}" "${NFC_INTERVAL_SEC}"
while [ "${STOP}" -eq 0 ]; do
n=$(( n + 1 ))
run_one_round "${n}"
if [ "${NFC_MAX_ROUNDS}" -gt 0 ] 2>/dev/null && [ "${n}" -ge "${NFC_MAX_ROUNDS}" ]; then
break
fi
[ "${STOP}" -eq 0 ] && interruptible_sleep "${NFC_INTERVAL_SEC}"
done
printf '[%s] ===== nfc_polling stop : %d round(s) =====\n' "$(ts)" "${n}"
}
# --- sub-commands ------------------------------------------------------------
do_start() {
local pid
pid="$(is_running)" && die "already running (pid=${pid})"
[ -r "${NFC_SCRIPT}" ] || die "cannot read ${NFC_SCRIPT}"
command -v "${NFC_PY}" >/dev/null 2>&1 || die "${NFC_PY} not found"
mkdir -p "${NFC_LOG_DIR}" || die "cannot create ${NFC_LOG_DIR}"
# start always begins a fresh log, so a report is about THIS run only
: > "${LOG_FILE}" || die "cannot write ${LOG_FILE}"
if command -v setsid >/dev/null 2>&1; then
setsid "${SCRIPT_PATH}" __daemon >/dev/null 2>&1 &
else
nohup "${SCRIPT_PATH}" __daemon >/dev/null 2>&1 &
disown 2>/dev/null
fi
sleep 1
pid="$(is_running)" || die "start failed, check ${LOG_FILE}"
printf 'started (pid=%s)\nlog: %s\n' "${pid}" "${LOG_FILE}"
}
do_daemon() {
mkdir -p "${NFC_LOG_DIR}" || die "cannot create ${NFC_LOG_DIR}"
exec >>"${LOG_FILE}" 2>&1
printf '%d\n' "$$" > "${PID_FILE}"
trap 'rm -f "${PID_FILE}"' EXIT
main_loop
}
do_stop() {
local pid i
pid="$(is_running)" || { printf 'not running\n'; rm -f "${PID_FILE}"; return 0; }
kill -TERM -"${pid}" 2>/dev/null || kill -TERM "${pid}" 2>/dev/null
for (( i = 0; i < 20; i++ )); do
kill -0 "${pid}" 2>/dev/null || break
sleep 0.5
done
if kill -0 "${pid}" 2>/dev/null; then
printf 'SIGTERM ignored, sending SIGKILL\n'
kill -KILL -"${pid}" 2>/dev/null || kill -KILL "${pid}" 2>/dev/null
fi
rm -f "${PID_FILE}"
printf 'stopped (pid=%s)\n' "${pid}"
}
# counts straight out of the log, so it is the same answer running or stopped
_tally() {
local f="$1"
[ -r "${f}" ] || { printf '0 0 0 0\n'; return; }
awk '
/RESULT=PASS/ { p++ }
/RESULT=FAIL/ { f++ }
/RESULT=ERROR/ { e++ }
/ START$/ { s++ }
END { printf "%d %d %d %d\n", s+0, p+0, f+0, e+0 }
' "${f}"
}
do_status() {
local pid started passed failed errored size
if pid="$(is_running)"; then
printf 'status : running (pid=%s)\n' "${pid}"
else
printf 'status : stopped\n'
fi
printf 'log : %s\n' "${LOG_FILE}"
if [ -r "${LOG_FILE}" ]; then
size="$(du -h "${LOG_FILE}" 2>/dev/null | cut -f1)"
read -r started passed failed errored <<< "$(_tally "${LOG_FILE}")"
printf 'size : %s\n' "${size:-?}"
printf 'rounds : %s started (PASS %s / FAIL %s / ERROR %s)\n' \
"${started}" "${passed}" "${failed}" "${errored}"
printf 'last : %s\n' "$(grep -a 'RESULT=' "${LOG_FILE}" | tail -1)"
else
printf 'size : (no log yet)\n'
fi
}
do_report() {
local pid started passed failed errored inflight verdict first last
[ -r "${LOG_FILE}" ] || die "no log at ${LOG_FILE} -- has it been started?"
read -r started passed failed errored <<< "$(_tally "${LOG_FILE}")"
inflight=$(( started - passed - failed - errored ))
echo "===== NFC polling report ====="
printf 'log : %s\n' "${LOG_FILE}"
if pid="$(is_running)"; then
printf 'state : RUNNING (pid=%s) -- this is a snapshot, the count is still moving\n' "${pid}"
else
printf 'state : stopped\n'
fi
first="$(grep -a -m1 ' START$' "${LOG_FILE}" | sed -n 's/^\[\([^]]*\)\].*/\1/p')"
last="$(grep -a 'RESULT=' "${LOG_FILE}" | tail -1 | sed -n 's/^\[\([^]]*\)\].*/\1/p')"
printf 'window : %s -> %s\n' "${first:-?}" "${last:-?}"
echo ""
printf 'rounds : %d\n' "${started}"
printf 'PASS : %d\n' "${passed}"
printf 'FAIL : %d\n' "${failed}"
printf 'ERROR : %d (tool did not produce a verdict)\n' "${errored}"
[ "${inflight}" -gt 0 ] && printf 'in flight: %d (round started, no result yet)\n' "${inflight}"
if [ "${started}" -eq 0 ]; then
verdict="NO DATA"
elif [ "${failed}" -gt 0 ] || [ "${errored}" -gt 0 ]; then
verdict="FAIL"
else
verdict="PASS"
fi
printf 'RESULT : %s\n' "${verdict}"
echo ""
echo "--- tags seen ---"
grep -a 'RESULT=PASS' "${LOG_FILE}" \
| sed -n 's/.* tag=\([0-9A-Fa-f]*\) .*/\1/p' \
| sort | uniq -c | sort -rn | awk '{printf " %-20s %s\n", $2, $1}'
grep -aq 'RESULT=PASS.* tag=[0-9A-Fa-f]' "${LOG_FILE}" || echo " (none)"
if [ "$(( failed + errored ))" -gt 0 ]; then
echo ""
echo "--- last 10 FAIL / ERROR ---"
grep -aE 'RESULT=(FAIL|ERROR)' "${LOG_FILE}" | tail -10 | sed 's/^/ /'
fi
echo ""
[ "${verdict}" = "FAIL" ] && return 2
return 0
}
usage() {
cat <<USAGE
${SCRIPT_NAME} - background NFC tag polling (wraps ${NFC_SCRIPT_NAME})
start run in the background; CLEARS the log first
stop stop it
status running? pid, rounds so far, last result
tail [n] last n lines of the log (default 50) -- does NOT follow
report PASS/FAIL tally -- safe to run WHILE polling
clear delete the log (must be stopped)
fg run in the foreground, Ctrl-C to stop
interval ${NFC_INTERVAL_SEC}s per-round timeout ${NFC_TIMEOUT_SEC}s rounds ${NFC_MAX_ROUNDS} (0 = forever)
log ${LOG_FILE}
A round is PASS or FAIL from the tool's own summary line; ERROR means it
produced neither, which is a different problem from a tag that would not read.
USAGE
}
case "${1:-}" in
start) do_start ;;
stop) do_stop ;;
status) do_status ;;
report) do_report ;;
# deliberately NOT 'tail -f': that never returns, and a TTL macro waiting on
# the prompt would hang there forever.
tail) [ -r "${LOG_FILE}" ] || die "no log at ${LOG_FILE}"
tail -n "${2:-50}" "${LOG_FILE}" ;;
clear)
is_running >/dev/null && die "still running, stop it first"
rm -f "${LOG_FILE}"
printf 'log cleared\n'
;;
fg) main_loop ;;
__daemon) do_daemon ;;
-h|--help|"") usage ;;
*) printf '[ERROR] unknown sub-command: %s\n\n' "$1" >&2; usage; exit 1 ;;
esac
src/Script_ABC_Blanton/Blanton_Script/port_prbs_monitor.sh
+431
View File
@@ -0,0 +1,431 @@
#!/bin/bash
###############################################################################
# port_prbs_monitor.sh
#
# Version : V1.0.0
# Author : ETWen
# Date : 20260826
#
# Purpose : Run a PRBS test on the two 100G uplinks AT THE SAME TIME and keep
# polling until stopped. Each port gets its own background worker:
#
# setup : sfputil lpmode off <port>
# phy diag <phy> prbs set <poly>
# phy diag <phy> prbsstat STArt Interval=<n>
# poll : phy diag <phy> prbs get <- PASS/FAIL comes from here
# phydiag <phy> prbsstat Ber <- recorded only
# stop : phydiag <phy> prbsstat STOp
# phydiag <phy> prbs clear
#
# Every command and its full output goes to that port's raw log.
# `stop` tears the test down and renders the report; `report`
# prints the PASS/FAIL tally per port.
#
# Notes : - A poll counts as PASS only when the output contains "PRBS OK!".
# bcmcmd exits 0 even when the BCM shell rejects a command, so the
# exit status cannot be used -- only the output can.
# - bcmcmd is always run with </dev/null. Without it, it inherits the
# polling loop's stdin and eats it, and the loop runs once.
#
# Version History
# V1.0.0 20260826 Initial Version
###############################################################################
set -u
###############################################################################
# User Configurable Section -- normally this is the only part you need to edit
###############################################################################
# --- port A ---
PORT_A_NAME="Ethernet513"
PORT_A_UNIT=0 # bcmcmd -n <unit>
PORT_A_PHY=268 # phy diag <phy>
# --- port B ---
PORT_B_NAME="Ethernet514"
PORT_B_UNIT=1
PORT_B_PHY=268
# Which ports `start` runs when no argument is given: both | a | b
# Override per run: start a / start b / start both
# Running one at a time is how you tell a genuine port fault from the DUT not
# coping with two PRBS streams at once.
PORTS="both"
# --- PRBS ---
PRBS_POLY="p=3" # passed to "prbs set"
PRBS_STAT_INTERVAL=5 # passed to "prbsstat STArt Interval="
POLL_INTERVAL_SEC=10 # seconds between polls
PASS_PATTERN="PRBS OK!" # a poll is PASS only if the output contains this
# Seconds to wait after the setup commands before the first poll, so the link
# has settled and the counters mean something.
SETTLE_SEC=10
# Stop after this many polls per port. 0 = run until stopped manually.
MAX_POLLS=0
# How many recent poll blocks the report shows per port.
TAIL_ENTRIES=20
# Prefix for privileged commands; empty because this already runs as root.
SUDO=""
BCMCMD="bcmcmd"
# Logging
LOG_DIR="" # empty = <script directory>/log
LOG_NAME="port_prbs.log"
# What `start` does with the log left behind by the previous run:
# new | archive | append
START_LOG_MODE="new"
###############################################################################
# Internal
###############################################################################
SCRIPT_NAME="$(basename -- "${BASH_SOURCE[0]}")"
SCRIPT_DIR="$(cd -- "$(dirname -- "${BASH_SOURCE[0]}")" && pwd)"
SCRIPT_PATH="${SCRIPT_DIR}/${SCRIPT_NAME}"
[ -n "${LOG_DIR}" ] || LOG_DIR="${SCRIPT_DIR}/log"
LOG_FILE="${LOG_DIR}/${LOG_NAME}"
BASE="${LOG_DIR}/${LOG_NAME%.log}"
PID_FILE="${BASE}.pid"
STATE_FILE="${BASE}.state"
RAW_A="${BASE}_${PORT_A_NAME}.raw"
RAW_B="${BASE}_${PORT_B_NAME}.raw"
ts() { date '+%Y-%m-%d %H:%M:%S'; }
# port_tally <name> <raw> -> "<polls> <pass> <fail> <verdict>"
# A raw without a "PRBS START" line means the port was not run this session,
# which is SKIP -- reporting it as FAIL would make a deliberate single-port
# run look like half the hardware is broken.
port_tally() {
local name="$1" raw="$2" pass fail polls verdict
if [ ! -s "${raw}" ] || ! grep -aq "PRBS START ${name}" "${raw}" 2>/dev/null; then
printf '0 0 0 SKIP'; return 0
fi
pass=$(grep -ac "PRBS ${name} poll=[0-9]* PASS" "${raw}" 2>/dev/null); pass=${pass:-0}
fail=$(grep -ac "PRBS ${name} poll=[0-9]* FAIL" "${raw}" 2>/dev/null); fail=${fail:-0}
polls=$(( pass + fail ))
if [ "${polls}" -gt 0 ] && [ "${fail}" -eq 0 ]; then verdict=PASS; else verdict=FAIL; fi
printf '%s %s %s %s' "${polls}" "${pass}" "${fail}" "${verdict}"
}
die() { printf '[ERROR] %s\n' "$*" >&2; exit 1; }
# bcm <unit> <dsh command> -- output on stdout, never trusts the exit status.
# </dev/null so it cannot consume the caller's stdin.
bcm() {
local unit="$1" cmd="$2"
${SUDO} "${BCMCMD}" -n "${unit}" -c "dsh -c \"${cmd}\"" </dev/null 2>&1
}
# run_step <unit> <dsh command>
# The command and its full output are written to the LOG via stderr, because
# the worker has stderr pointed at the raw file. Only the output itself goes to
# stdout, so `out="$(run_step ...)"` captures the output without swallowing the
# log lines -- writing both to stdout would have put the whole record inside
# the variable and left the log with nothing but the poll verdicts.
run_step() {
local unit="$1" cmd="$2" out
out="$(bcm "${unit}" "${cmd}")"
{
printf '[%s] CMD : bcmcmd -n %s -c '\''dsh -c "%s"'\''\n' "$(ts)" "${unit}" "${cmd}"
printf '%s\n' "${out}"
} >&2
printf '%s' "${out}"
}
# Echo "<pid_a> <pid_b>" and return 0 while at least one worker is alive. A
# port that was not started this run is recorded as "-", so a single-port run
# is a first-class case rather than a half-broken two-port one.
is_running() {
local pa pb alive=0
[ -f "${PID_FILE}" ] || return 1
pa="$(sed -n '1p' "${PID_FILE}" 2>/dev/null)"; pa="${pa:--}"
pb="$(sed -n '2p' "${PID_FILE}" 2>/dev/null)"; pb="${pb:--}"
[[ "${pa}" =~ ^[0-9]+$ ]] && kill -0 "${pa}" 2>/dev/null && alive=1
[[ "${pb}" =~ ^[0-9]+$ ]] && kill -0 "${pb}" 2>/dev/null && alive=1
[ "${alive}" -eq 1 ] || return 1
printf '%s %s' "${pa}" "${pb}"
return 0
}
###############################################################################
# Worker -- one per port, launched by `start`
###############################################################################
WORKER_STOP=0
worker_on_signal() { WORKER_STOP=1; }
# __worker <name> <unit> <phy> <rawfile>
do_worker() {
local name="$1" unit="$2" phy="$3" raw="$4"
local n=0 pass=0 fail=0 out
exec >>"${raw}" 2>&1
trap worker_on_signal INT TERM
printf '#############################################################\n'
printf '[%s] PRBS START %s (unit %s, phy %s) poly=%s interval=%ss poll=%ss\n' \
"$(ts)" "${name}" "${unit}" "${phy}" "${PRBS_POLY}" \
"${PRBS_STAT_INTERVAL}" "${POLL_INTERVAL_SEC}"
printf '#############################################################\n'
# --- setup ---
printf '[%s] CMD : sfputil lpmode off %s\n' "$(ts)" "${name}"
${SUDO} sfputil lpmode off "${name}" </dev/null 2>&1
run_step "${unit}" "phy diag ${phy} prbs set ${PRBS_POLY}" >/dev/null
run_step "${unit}" "phy diag ${phy} prbsstat STArt Interval=${PRBS_STAT_INTERVAL}" >/dev/null
sleep "${SETTLE_SEC}"
# --- poll ---
while [ "${WORKER_STOP}" -eq 0 ]; do
n=$(( n + 1 ))
printf -- '---------- %s POLL %d @ %s ----------\n' "${name}" "${n}" "$(ts)"
out="$(run_step "${unit}" "phy diag ${phy} prbs get")"
# Ber is recorded for the log only; it does not decide the verdict.
run_step "${unit}" "phydiag ${phy} prbsstat Ber" >/dev/null
if printf '%s' "${out}" | grep -qF "${PASS_PATTERN}"; then
pass=$(( pass + 1 ))
printf '[%s] PRBS %s poll=%d PASS\n' "$(ts)" "${name}" "${n}"
else
fail=$(( fail + 1 ))
printf '[%s] PRBS %s poll=%d FAIL\n' "$(ts)" "${name}" "${n}"
fi
[ "${MAX_POLLS}" -gt 0 ] && [ "${n}" -ge "${MAX_POLLS}" ] && break
[ "${WORKER_STOP}" -eq 0 ] || break
sleep "${POLL_INTERVAL_SEC}"
done
# --- teardown ---
run_step "${unit}" "phydiag ${phy} prbsstat STOp" >/dev/null
run_step "${unit}" "phydiag ${phy} prbs clear" >/dev/null
printf '[%s] PRBS STOP %s polls=%d PASS=%d FAIL=%d\n' \
"$(ts)" "${name}" "${n}" "${pass}" "${fail}"
}
###############################################################################
# Report
###############################################################################
# render_port <name> <unit> <phy> <raw>
render_port() {
local name="$1" unit="$2" phy="$3" raw="$4"
local t polls pass fail verdict
t="$(port_tally "${name}" "${raw}")"
polls="$(printf '%s' "${t}" | awk '{print $1}')"
pass="$(printf '%s' "${t}" | awk '{print $2}')"
fail="$(printf '%s' "${t}" | awk '{print $3}')"
verdict="$(printf '%s' "${t}" | awk '{print $4}')"
if [ "${verdict}" = "SKIP" ]; then
printf -- '----- %s (unit %s, phy %s) : not run this session -----\n\n' \
"${name}" "${unit}" "${phy}"
printf '[%s] RESULT %-12s polls=%-4s PASS=%-4s FAIL=%-4s %s\n\n' \
"$(ts)" "${name}" "${polls}" "${pass}" "${fail}" "${verdict}"
return 0
fi
printf -- '----- %s (unit %s, phy %s) : last %s poll blocks -----\n' \
"${name}" "${unit}" "${phy}" "${TAIL_ENTRIES}"
grep -aE "^-{10} ${name} POLL|PRBS ${name} poll=|prbsstat Ber|^ *[0-9]+ *: " "${raw}" 2>/dev/null \
| tail -n $(( TAIL_ENTRIES * 3 ))
printf '\n'
printf '[%s] RESULT %-12s polls=%-4s PASS=%-4s FAIL=%-4s %s\n\n' \
"$(ts)" "${name}" "${polls}" "${pass}" "${fail}" "${verdict}"
}
write_report() {
local started
started="$(sed -n '1p' "${STATE_FILE}" 2>/dev/null)"
{
printf '#############################################################\n'
printf '[%s] 100G PRBS report\n' "$(ts)"
printf ' started : %s\n' "${started:-unknown}"
printf ' stopped : %s\n' "$(ts)"
printf ' %s : unit %s, phy %s\n' "${PORT_A_NAME}" "${PORT_A_UNIT}" "${PORT_A_PHY}"
printf ' %s : unit %s, phy %s\n' "${PORT_B_NAME}" "${PORT_B_UNIT}" "${PORT_B_PHY}"
printf ' poly=%s prbsstat Interval=%s poll every %ss\n' \
"${PRBS_POLY}" "${PRBS_STAT_INTERVAL}" "${POLL_INTERVAL_SEC}"
printf ' a poll is PASS only when the output contains "%s"\n' "${PASS_PATTERN}"
printf '#############################################################\n\n'
render_port "${PORT_A_NAME}" "${PORT_A_UNIT}" "${PORT_A_PHY}" "${RAW_A}"
render_port "${PORT_B_NAME}" "${PORT_B_UNIT}" "${PORT_B_PHY}" "${RAW_B}"
# Taken after prbsstat STOp + prbs clear, so this is the recovered
# state. During the test the same command would have reported DOWN.
printf -- '--- show interfaces status %s,%s (after prbsstat STOp + prbs clear) ---\n' \
"${PORT_A_NAME}" "${PORT_B_NAME}"
${SUDO} show interfaces status "${PORT_A_NAME},${PORT_B_NAME}" </dev/null 2>&1
} >> "${LOG_FILE}"
}
###############################################################################
# Sub-commands
###############################################################################
prepare_log_on_start() {
local stamp
case "${START_LOG_MODE}" in
append) return 0 ;;
archive)
if [ -s "${LOG_FILE}" ]; then
stamp="$(date '+%Y%m%d-%H%M%S')"
mv -f "${LOG_FILE}" "${LOG_FILE}.${stamp}" || die "cannot archive ${LOG_FILE}"
fi ;;
new)
[ -f "${LOG_FILE}" ] && { : > "${LOG_FILE}" || die "cannot truncate ${LOG_FILE}"; } ;;
*) die "invalid START_LOG_MODE: ${START_LOG_MODE}" ;;
esac
}
# do_start [both|a|b|<port name>]
do_start() {
local which="${1:-${PORTS}}" pids pa="-" pb="-" run_a=0 run_b=0
case "${which}" in
both|BOTH|all) run_a=1; run_b=1 ;;
a|A|"${PORT_A_NAME}") run_a=1 ;;
b|B|"${PORT_B_NAME}") run_b=1 ;;
*) die "unknown port selector '${which}' (use: both | a | b | ${PORT_A_NAME} | ${PORT_B_NAME})" ;;
esac
pids="$(is_running)" && die "already running (pids=${pids})"
command -v "${BCMCMD}" >/dev/null 2>&1 || die "${BCMCMD} not found"
mkdir -p "${LOG_DIR}" || die "cannot create ${LOG_DIR}"
prepare_log_on_start
# Only the selected ports are truncated. A raw with no "PRBS START" line is
# what the report uses to tell "not run this session" from "ran and failed".
[ "${run_a}" -eq 1 ] && : > "${RAW_A}"
[ "${run_b}" -eq 1 ] && : > "${RAW_B}"
printf '%s\n' "$(ts)" > "${STATE_FILE}"
# One worker per selected port; with both, they run at the same time.
# Invoked through bash so the file does not need the execute bit.
if [ "${run_a}" -eq 1 ]; then
setsid bash "${SCRIPT_PATH}" __worker \
"${PORT_A_NAME}" "${PORT_A_UNIT}" "${PORT_A_PHY}" "${RAW_A}" >/dev/null 2>&1 &
pa=$!
disown "${pa}" 2>/dev/null
fi
if [ "${run_b}" -eq 1 ]; then
setsid bash "${SCRIPT_PATH}" __worker \
"${PORT_B_NAME}" "${PORT_B_UNIT}" "${PORT_B_PHY}" "${RAW_B}" >/dev/null 2>&1 &
pb=$!
disown "${pb}" 2>/dev/null
fi
printf '%s\n%s\n' "${pa}" "${pb}" > "${PID_FILE}"
sleep 1
[ "${run_a}" -eq 1 ] && { kill -0 "${pa}" 2>/dev/null || die "${PORT_A_NAME} worker failed, see ${RAW_A}"; }
[ "${run_b}" -eq 1 ] && { kill -0 "${pb}" 2>/dev/null || die "${PORT_B_NAME} worker failed, see ${RAW_B}"; }
printf 'started (%s pid=%s, %s pid=%s)\nlog: %s\n' \
"${PORT_A_NAME}" "${pa}" "${PORT_B_NAME}" "${pb}" "${LOG_FILE}"
# Deliberately NOT printing "show interfaces status" here. With PRBS armed
# the link is out of normal operation and reports DOWN, which reads as a
# failure to anyone glancing at the console. The status is shown in the
# report instead, once PRBS has been cleared.
}
do_stop() {
local pids pa pb i
pids="$(is_running)" || { printf 'not running\n'; rm -f "${PID_FILE}"; return 0; }
pa="${pids% *}"; pb="${pids#* }"
# TERM lets each worker finish its poll and run prbsstat STOp / prbs clear.
[[ "${pa}" =~ ^[0-9]+$ ]] && kill -TERM "${pa}" 2>/dev/null
[[ "${pb}" =~ ^[0-9]+$ ]] && kill -TERM "${pb}" 2>/dev/null
for (( i = 0; i < 120; i++ )); do
kill -0 "${pa}" 2>/dev/null || kill -0 "${pb}" 2>/dev/null || break
sleep 0.5
done
if kill -0 "${pa}" 2>/dev/null || kill -0 "${pb}" 2>/dev/null; then
printf 'workers did not exit in time, sending SIGKILL (PRBS may be left running)\n' >&2
kill -KILL "${pa}" 2>/dev/null
kill -KILL "${pb}" 2>/dev/null
fi
write_report
rm -f "${PID_FILE}"
printf 'stopped\nreport: %s\n' "${LOG_FILE}"
}
do_report() {
local name raw pass fail polls verdict
printf '%-14s %-8s %-8s %-8s %s\n' PORT POLLS PASS FAIL RESULT
printf '%-14s %-8s %-8s %-8s %s\n' -------------- -------- -------- -------- ------
for spec in "${PORT_A_NAME}:${RAW_A}" "${PORT_B_NAME}:${RAW_B}"; do
name="${spec%%:*}"; raw="${spec#*:}"
set -- $(port_tally "${name}" "${raw}")
printf '%-14s %-8s %-8s %-8s %s\n' "${name}" "$1" "$2" "$3" "$4"
done
}
do_status() {
local pids
if pids="$(is_running)"; then
printf 'status : running (%s pid=%s, %s pid=%s)\n' \
"${PORT_A_NAME}" "${pids% *}" "${PORT_B_NAME}" "${pids#* }"
else
printf 'status : stopped\n'
fi
printf 'log : %s\n' "${LOG_FILE}"
do_report
}
usage() {
cat <<EOF
Usage: ${SCRIPT_NAME} {start [both|a|b]|stop|status|report|clear}
start Set up PRBS and poll in the background. With no argument it runs
\$PORTS (currently "${PORTS}"); "a" or "b" runs that port alone,
which is how you tell a genuine port fault from the DUT not coping
with two PRBS streams at once.
start both ports at the same time
start a ${PORT_A_NAME} only
start b ${PORT_B_NAME} only
Port status is NOT shown here: with PRBS armed the link reports
DOWN, which looks like a failure. See the report instead.
stop Stop polling, run prbsstat STOp + prbs clear on both ports, and
render the report into the log
report Print the PASS/FAIL tally per port
status Show worker pids plus the current tally
clear Remove the log and raw captures (must be stopped first)
Log file : ${LOG_FILE}
Raw : ${RAW_A}
${RAW_B}
A poll is PASS only when "phy diag <phy> prbs get" reports "${PASS_PATTERN}".
prbsstat Ber is captured alongside every poll but does not decide the verdict.
A port that was not run in this session reports SKIP, not FAIL.
EOF
}
###############################################################################
# Entry point
###############################################################################
case "${1:-}" in
start) shift; do_start "${1:-${PORTS}}" ;;
stop) do_stop ;;
status) do_status ;;
report) do_report ;;
clear)
is_running >/dev/null && die "still running, stop it first"
rm -f "${LOG_FILE}" "${LOG_FILE}".[0-9]* "${RAW_A}" "${RAW_B}" "${STATE_FILE}"
printf 'log cleared\n' ;;
__worker)
shift
do_worker "$1" "$2" "$3" "$4" ;;
-h|--help|"") usage ;;
*) printf '[ERROR] unknown sub-command: %s\n\n' "$1" >&2; usage; exit 1 ;;
esac
src/Script_ABC_Blanton/Blanton_Script/pwr_brick.sh
+241
View File
@@ -0,0 +1,241 @@
#!/usr/bin/env bash
# =============================================================================
# pwr_brick.sh -- PDB / CPB power brick Vin / Iin / Vout / Iout / Temp
# =============================================================================
# Version History:
# V1.1.0 2026-09-02 PAGE values and conversions taken from the ADPM12200
# datasheet instead of the bring-up spreadsheet.
# The spreadsheet wrote every PAGE in decimal but with an
# 0x prefix, so four of the five selected the wrong page:
# Vin PAGE 9 -> it said 0x00 (should be 0x09)
# Iin PAGE 10 -> it said 0x10 (should be 0x0A)
# Vout PAGE 2 -> it said 0x02 correct by luck
# Iout PAGE 14 -> it said 0x14 (should be 0x0E)
# Temp PAGE 18 -> it said 0x18 (should be 0x12)
# Only Vout worked, because 2 reads the same either way.
# That is why Iin/Iout answered 0xFFFF and Temp 0x0000.
# Conversions now use the datasheet DIRECT equation; the
# reverse-engineered BRICK_VIN_LSB is gone.
# V1.0.0 2026-09-02 First version.
# =============================================================================
#
# Path: CB FPGA F3 VI2C ch4 -> TCA954x mux 0x72 ch0 -> the bricks
#
# The four ADPM12200 modules put each measurement on its own PMBus PAGE, so a
# PAGE write has to precede every read. blanton_pwr_data.sh does not send one
# at all (its PDB table has page "-"), which is why it reports them as NA.
#
# READ_VIN 0x88 PAGE 9
# READ_IIN 0x89 PAGE 10
# READ_VOUT 0x8B PAGE 2
# READ_IOUT 0x8C PAGE 14
# READ_TEMPERATURE_1 0x8D PAGE 18
#
# DIRECT format, datasheet Table 3 ("PMBus Command Code Coefficients"):
#
# X = (1/m) x (Y x 10^-R - b) Y = the 2-byte two's complement word
#
# Voltage m=0.125 b=0 R=0 units mV -> X = Y x 8 mV
# Current m=0.25 b=0 R=2 units A -> X = Y x 0.04 A
# Temperature m=1 b=0 R=2 units degC -> X = Y x 0.01 degC
#
# Sanity check: READ_VOUT 0x05D4 = 1492 -> 1492 x 8 = 11936 mV, which is exactly
# what PDB_IBC_SWB1_A_VOUT reports in 'show platform voltage'.
#
# ⚠️ Table 3 does not list READ_VIN or READ_IIN. They are decoded here with the
# Voltage and Current coefficients respectively - reasonable, and consistent
# with a ~50 V input, but not stated by the datasheet. PB_VIN_M / PB_IIN_M
# below are where to change that if the part turns out to differ.
#
# ⚠️ CPB.PU37 (0x26) is a DIFFERENT part: no PAGE writes, and its own scaling
# (Vin 0.25 V, Vout 2^-11 V, Iout 0.5 A per count of the mantissa). Those
# three were confirmed against words this DUT returns.
#
# Usage:
# ./pwr_brick.sh show # the table
# ./pwr_brick.sh show -r # add the raw words
# ./pwr_brick.sh help
# =============================================================================
# --- User Configurable Section ----------------------------------------------
PB_CH="${PB_CH:-4}" # ICB VI2C channel
PB_MUX="${PB_MUX:-0x72}" # TCA954x address
PB_MUX_SEL="${PB_MUX_SEL:-0x01}" # control byte: bit0 = channel 0
PB_TRIES="${PB_TRIES:-8}" # reads per value before giving up
# PMBus PAGE per measurement (ADPM12200). Decimal page numbers written in hex.
PB_PAGE_VIN="${PB_PAGE_VIN:-0x09}" # 9
PB_PAGE_IIN="${PB_PAGE_IIN:-0x0A}" # 10
PB_PAGE_VOUT="${PB_PAGE_VOUT:-0x02}" # 2
PB_PAGE_IOUT="${PB_PAGE_IOUT:-0x0E}" # 14
PB_PAGE_TEMP="${PB_PAGE_TEMP:-0x12}" # 18
# DIRECT coefficients: m, R, and the divisor that takes the datasheet unit to
# the displayed unit (mV -> V is 1000; A and degC are already right).
PB_VOUT_M="${PB_VOUT_M:-0.125}"; PB_VOUT_R="${PB_VOUT_R:-0}"; PB_VOUT_DIV="${PB_VOUT_DIV:-1000}"
PB_VIN_M="${PB_VIN_M:-0.125}"; PB_VIN_R="${PB_VIN_R:-0}"; PB_VIN_DIV="${PB_VIN_DIV:-1000}"
PB_IOUT_M="${PB_IOUT_M:-0.25}"; PB_IOUT_R="${PB_IOUT_R:-2}"; PB_IOUT_DIV="${PB_IOUT_DIV:-1}"
PB_IIN_M="${PB_IIN_M:-0.25}"; PB_IIN_R="${PB_IIN_R:-2}"; PB_IIN_DIV="${PB_IIN_DIV:-1}"
PB_TEMP_M="${PB_TEMP_M:-1}"; PB_TEMP_R="${PB_TEMP_R:-2}"; PB_TEMP_DIV="${PB_TEMP_DIV:-1}"
# CPB.PU37 only (different part, no PAGE, mantissa-based)
CPB_VIN_LSB="${CPB_VIN_LSB:-0.25}" # V per count of the mantissa
CPB_IOUT_LSB="${CPB_IOUT_LSB:-0.5}" # A per count of the mantissa
# Plausibility windows. A decoded value outside its window is discarded and the
# read retried; this is what rejects the corrupted words this bus produces - a
# bad high byte turns 11.98 V into 32.00 V, which "reject 0xFFFF" never catches.
PB_VIN_LO="${PB_VIN_LO:-30}"; PB_VIN_HI="${PB_VIN_HI:-70}"
PB_VOUT_LO="${PB_VOUT_LO:-8}"; PB_VOUT_HI="${PB_VOUT_HI:-14}"
PB_IIN_LO="${PB_IIN_LO:-0}"; PB_IIN_HI="${PB_IIN_HI:-100}"
PB_IOUT_LO="${PB_IOUT_LO:-0}"; PB_IOUT_HI="${PB_IOUT_HI:-300}"
PB_TEMP_LO="${PB_TEMP_LO:-0}"; PB_TEMP_HI="${PB_TEMP_HI:-125}"
# All-ones and all-zeros are the two ways this bus says "nobody answered", and
# both can decode into a value that sits inside its window - 0x0000 on the
# temperature register reads as a perfectly plausible 0 C. Rejected as raw
# words, before any conversion, so no window has to be bent to catch them.
PB_REJECT_FFFF="${PB_REJECT_FFFF:-1}"
PB_REJECT_0000="${PB_REJECT_0000:-1}"
# "location:bricks:slave:netname:kind" kind = adpm (PAGE per read) | cpb
PB_DEVS=(
"SWB0.PU207:BRICKS1:0x62:P12V_SWB0_L:adpm"
"SWB0.PU13:BRICKS2:0x63:P12V_SWB0_L:adpm"
"SWB1.PU332:BRICKS1:0x60:P12V_SWB1_R:adpm"
"SWB1.PU85:BRICKS2:0x61:P12V_SWB1_R:adpm"
"CPB.PU37:BRICK:0x26:P12V_STBY:cpb"
)
# -----------------------------------------------------------------------------
PB_NA="NA"
PB_RAW=0
PB_DIR="$(cd "$(dirname "${BASH_SOURCE[0]}")" 2>/dev/null && pwd)"
_pb_err() { echo -e "[\033[31mERR \033[0m] $*" >&2; }
# --- backend -----------------------------------------------------------------
if ! declare -F vi2c_read >/dev/null 2>&1; then
if [ -r "$PB_DIR/blanton_icb_vi2c.sh" ]; then
# shellcheck source=/dev/null
source "$PB_DIR/blanton_icb_vi2c.sh" >/dev/null 2>&1
else
_pb_err "blanton_icb_vi2c.sh not found next to this script"; exit 1
fi
fi
declare -F vi2c_read >/dev/null 2>&1 || { _pb_err "vi2c_read() still undefined"; exit 1; }
# --- decoders ----------------------------------------------------------------
# DIRECT: X = (1/m) x (Y x 10^-R - b), b = 0. Y is two's complement, so a word
# above 0x7FFF is negative - that matters for temperature, not for the rails.
_pb_direct() {
awk -v w=$(( $1 )) -v m="$2" -v r="$3" -v d="$4" 'BEGIN{
if (w > 32767) w -= 65536
printf "%.3f", ((w * (10 ^ -r)) / m) / d
}'
}
# SLINEAR11 mantissa only (bits[10:0], two's complement) - CPB.PU37 path.
_pb_mant() { awk -v w=$(( $1 )) 'BEGIN{ m = w % 2048; if (m > 1023) m -= 2048; print m }'; }
_pb_mul() { awk -v a="$1" -v b="$2" 'BEGIN{ printf "%.3f", a * b }'; }
_pb_lin11() { awk -v w=$(( $1 )) 'BEGIN{ printf "%.4f", w * (2.0 ^ -11) }'; }
_pb_in() { awk -v x="$1" -v lo="$2" -v hi="$3" 'BEGIN{ exit !(x >= lo && x <= hi) }'; }
# _pb_word <slave> <page|-> <reg> -> "0xWWWW"
_pb_word() {
local slave="$1" page="$2" reg="$3" out
[ "$page" != "-" ] && vi2c_write "$PB_CH" "$slave" 0x00 "$page" >/dev/null 2>&1
out=$(vi2c_read "$PB_CH" "$slave" "$reg" 2 2>/dev/null \
| sed -n 's/.*\[0x\(..\) 0x\(..\)\].*/0x\2\1/p')
[ -n "$out" ] && echo "$out"
}
# _pb_val <slave> <page|-> <reg> <decoder> <a1> <a2> <a3> <lo> <hi>
# Retries until the decoded value lands inside the window; echoes "value raw".
_pb_val() {
local slave="$1" page="$2" reg="$3" dec="$4" a1="$5" a2="$6" a3="$7" lo="$8" hi="$9"
local i w v
for (( i = 0; i < PB_TRIES; i++ )); do
w=$(_pb_word "$slave" "$page" "$reg") || continue
[ -z "$w" ] && continue
[ "$PB_REJECT_FFFF" = "1" ] && [ "$(( w ))" -eq 65535 ] && continue
[ "$PB_REJECT_0000" = "1" ] && [ "$(( w ))" -eq 0 ] && continue
case "$dec" in
direct) v=$(_pb_direct "$w" "$a1" "$a2" "$a3") ;;
mant) v=$(_pb_mul "$(_pb_mant "$w")" "$a1") ;;
lin11) v=$(_pb_lin11 "$w") ;;
esac
_pb_in "$v" "$lo" "$hi" || continue
echo "$v $w"; return 0
done
echo "$PB_NA -"; return 1
}
_pb_mux_open() {
# The mux takes a bare control byte and vi2c_write always sends a register
# first, so passing 0x01 as both makes the part latch 0x01 either way.
vi2c_init "$PB_CH" >/dev/null 2>&1
vi2c_write "$PB_CH" "$PB_MUX" "$PB_MUX_SEL" "$PB_MUX_SEL" >/dev/null 2>&1
return 0
}
# --- show --------------------------------------------------------------------
pwr_brick_show() {
_pb_mux_open
echo "==== PDB / CPB power bricks (VI2C ch${PB_CH} -> mux ${PB_MUX} ch0) ===="
printf '%-3s %-12s %-8s %-7s %-14s %10s %10s %10s %10s %9s\n' \
"No." "Location" "Bricks" "SlaveID" "Netname" \
"Vin(V)" "Iin(A)" "Vout(V)" "Iout(A)" "Temp(C)"
printf '%s\n' "--------------------------------------------------------------------------------------------------------------"
local n=0 entry loc bk slave net kind vi ii vo io tp
for entry in "${PB_DEVS[@]}"; do
IFS=':' read -r loc bk slave net kind <<< "$entry"
n=$(( n + 1 ))
if [ "$kind" = "cpb" ]; then
vi=$(_pb_val "$slave" - 0x88 mant "$CPB_VIN_LSB" "" "" "$PB_VIN_LO" "$PB_VIN_HI")
ii="$PB_NA -" # no input current on this part
vo=$(_pb_val "$slave" - 0x8B lin11 "" "" "" "$PB_VOUT_LO" "$PB_VOUT_HI")
io=$(_pb_val "$slave" - 0x8C mant "$CPB_IOUT_LSB" "" "" "$PB_IOUT_LO" "$PB_IOUT_HI")
tp=$(_pb_val "$slave" - 0x8D direct 1 2 1 "$PB_TEMP_LO" "$PB_TEMP_HI")
else
vi=$(_pb_val "$slave" "$PB_PAGE_VIN" 0x88 direct "$PB_VIN_M" "$PB_VIN_R" "$PB_VIN_DIV" "$PB_VIN_LO" "$PB_VIN_HI")
ii=$(_pb_val "$slave" "$PB_PAGE_IIN" 0x89 direct "$PB_IIN_M" "$PB_IIN_R" "$PB_IIN_DIV" "$PB_IIN_LO" "$PB_IIN_HI")
vo=$(_pb_val "$slave" "$PB_PAGE_VOUT" 0x8B direct "$PB_VOUT_M" "$PB_VOUT_R" "$PB_VOUT_DIV" "$PB_VOUT_LO" "$PB_VOUT_HI")
io=$(_pb_val "$slave" "$PB_PAGE_IOUT" 0x8C direct "$PB_IOUT_M" "$PB_IOUT_R" "$PB_IOUT_DIV" "$PB_IOUT_LO" "$PB_IOUT_HI")
tp=$(_pb_val "$slave" "$PB_PAGE_TEMP" 0x8D direct "$PB_TEMP_M" "$PB_TEMP_R" "$PB_TEMP_DIV" "$PB_TEMP_LO" "$PB_TEMP_HI")
fi
printf '%-3s %-12s %-8s %-7s %-14s %10s %10s %10s %10s %9s\n' \
"$n" "$loc" "$bk" "$slave" "$net" \
"${vi%% *}" "${ii%% *}" "${vo%% *}" "${io%% *}" "${tp%% *}"
[ "$PB_RAW" = "1" ] && printf '%-3s %-12s %-8s %-7s %-14s %10s %10s %10s %10s %9s\n' \
"" "" "" "" "raw" "${vi##* }" "${ii##* }" "${vo##* }" "${io##* }" "${tp##* }"
done
# No trailing notes on stdout: this table gets pasted into reports and
# captured into the master console log, and a caveat printed every run stops
# being read after the second time. The caveats live in the file header -
# the one that still matters is that READ_VIN / READ_IIN are not in the
# datasheet coefficient table and borrow the Voltage / Current sets.
}
pwr_brick_help() {
echo -e "\033[1mpwr_brick.sh - PDB / CPB power brick readings\033[0m"
echo ""
echo -e " \033[33mshow\033[0m [-r] Vin / Iin / Vout / Iout / Temp for all 5 bricks (-r adds raw)"
echo -e " \033[33mhelp\033[0m"
echo ""
echo -e " Path : VI2C ch$PB_CH -> mux $PB_MUX ch0"
echo -e " The four ADPM12200 modules need a PMBus PAGE per measurement:"
echo -e " Vin $PB_PAGE_VIN(9) Iin $PB_PAGE_IIN(10) Vout $PB_PAGE_VOUT(2) Iout $PB_PAGE_IOUT(14) Temp $PB_PAGE_TEMP(18)"
echo -e " DIRECT format, datasheet Table 3: X = (1/m) x (Y x 10^-R - b)"
echo -e " CPB.PU37 (0x26) is a different part - no PAGE, its own scaling."
echo -e " \033[33mREAD_VIN / READ_IIN are not in Table 3; they borrow Voltage / Current.\033[0m"
}
case "${1:-help}" in
show)
shift 2>/dev/null
[ "${1:-}" = "-r" ] && PB_RAW=1
pwr_brick_show ;;
help|-h|--help) pwr_brick_help ;;
*) _pb_err "unknown sub-command: $1"; pwr_brick_help; exit 1 ;;
esac
src/Script_ABC_Blanton/Blanton_Script/usb_target.sh
+203
View File
@@ -0,0 +1,203 @@
#!/bin/bash
###############################################################################
# usb_target.sh
#
# Version : V1.1.0
# Author : ETWen
# Date : 20260825
# Purpose : Auto-detect an inserted USB mass-storage device and report either
# its device node, its mount point, or both.
#
# stdout : requested value(s) only, for $(...) capture
# stderr : diagnostic messages
#
# Usage : usb_target.sh [-o dev|mnt|both|id] [-n] [-r seconds]
#
# -o dev print partition device node (e.g. /dev/sda1)
# -o mnt print mount point (e.g. /mnt/usb) [default]
# -o both print "<dev> <mnt>" on one line
# -o id print stable by-id path (/dev/disk/by-id/...)
# -n detect only, do not mount
# -r sec udev enumeration wait, default 15
#
# Exit : 0 success
# 1 no USB mass-storage found
# 2 multiple USB disks detected (refuse to guess)
# 3 no usable filesystem on the device
# 4 mount failed
# 5 mounted but not writable
#
# Version History
# V1.0.0 20260825 Initial Version
# V1.1.0 20260825 Add -o/-n/-r options; expose device node and by-id path
###############################################################################
set -u
MNT_BASE="/mnt/usb"
RETRY=15
OUTPUT="mnt"
DO_MOUNT=1
log() { echo "[usb] $*" >&2; } # diagnostics go to stderr; stdout stays clean
while getopts "o:nr:h" opt; do
case "$opt" in
o) OUTPUT="$OPTARG" ;;
n) DO_MOUNT=0 ;;
r) RETRY="$OPTARG" ;;
h) sed -n '3,30p' "$0" >&2; exit 0 ;;
*) log "invalid option"; exit 1 ;;
esac
done
shift $((OPTIND - 1))
case "$OUTPUT" in
dev|mnt|both|id) ;;
*) log "invalid -o value: $OUTPUT"; exit 1 ;;
esac
# "-o dev" / "-o id" alone does not require mounting.
[ "$OUTPUT" = "dev" ] && [ "$DO_MOUNT" = "1" ] && DO_MOUNT=0
[ "$OUTPUT" = "id" ] && [ "$DO_MOUNT" = "1" ] && DO_MOUNT=0
#------------------------------------------------------------------------------
# Identify the physical disk(s) backing rootfs / /host so they can be excluded.
# Needed because some platforms boot from a USB DOM, which also reports TRAN=usb.
#------------------------------------------------------------------------------
get_system_disk() {
local src
for mp in /host / ; do
src=$(findmnt -no SOURCE "$mp" 2>/dev/null) || continue
lsblk -no PKNAME "$src" 2>/dev/null | head -1
done | sort -u
}
#------------------------------------------------------------------------------
# List candidate USB disks (whole devices, not partitions).
#------------------------------------------------------------------------------
find_usb_disks() {
local sysdisks; sysdisks=$(get_system_disk)
lsblk -dn -o NAME,TYPE,TRAN,RM 2>/dev/null | while read -r name type tran rm; do
[ "$type" = "disk" ] || continue
case "$name" in loop*|ram*|dm-*|sr*|zram*) continue ;; esac
# Older util-linux may not expose the TRAN column; fall back to sysfs.
if [ "$tran" != "usb" ]; then
readlink -f "/sys/block/$name/device" 2>/dev/null | grep -q '/usb[0-9]' || continue
[ "$rm" = "1" ] || continue
fi
echo "$sysdisks" | grep -qx "$name" && { log "skip $name (system disk)"; continue; }
echo "/dev/$name"
done
}
#------------------------------------------------------------------------------
# Pick a mountable partition from a disk; fall back to the whole device for
# superfloppy layouts (filesystem written directly, no partition table).
#------------------------------------------------------------------------------
pick_partition() {
local disk="$1" p
p=$(lsblk -ln -o NAME,TYPE,FSTYPE "$disk" | \
awk '$2=="part" && $3!="" {print "/dev/"$1; exit}')
[ -n "$p" ] && { echo "$p"; return; }
[ -n "$(lsblk -dn -o FSTYPE "$disk")" ] && echo "$disk"
}
#------------------------------------------------------------------------------
# Resolve a device node to a stable /dev/disk/by-id path, if one exists.
#------------------------------------------------------------------------------
resolve_by_id() {
local dev="$1" real link
real=$(readlink -f "$dev")
for link in /dev/disk/by-id/*; do
[ -e "$link" ] || continue
case "$link" in *-part*|*) ;; esac
[ "$(readlink -f "$link")" = "$real" ] && { echo "$link"; return 0; }
done
return 1
}
#------------------------------------------------------------------------------
# Main
#------------------------------------------------------------------------------
disks=""
for i in $(seq 1 "$RETRY"); do
disks=$(find_usb_disks)
[ -n "$disks" ] && break
sleep 1
done
[ -z "$disks" ] && { log "no USB mass-storage found"; exit 1; }
n=$(echo "$disks" | wc -l)
if [ "$n" -gt 1 ]; then
log "multiple USB disks detected, refuse to guess:"
log "$disks"
exit 2
fi
disk="$disks"
part=$(pick_partition "$disk")
[ -z "$part" ] && { log "$disk has no usable filesystem"; exit 3; }
fstype=$(lsblk -no FSTYPE "$part")
log "found $part (disk=$disk fstype=$fstype)"
# --- device-node only: no mount needed ---------------------------------------
if [ "$OUTPUT" = "dev" ]; then
echo "$part"
exit 0
fi
if [ "$OUTPUT" = "id" ]; then
if byid=$(resolve_by_id "$part"); then
echo "$byid"
exit 0
fi
log "no by-id path for $part, falling back to device node"
echo "$part"
exit 0
fi
# --- mount point required ----------------------------------------------------
mp=$(lsblk -no MOUNTPOINT "$part" | head -1)
if [ -z "$mp" ] && [ "$DO_MOUNT" = "0" ]; then
log "$part is not mounted and -n was given"
exit 4
fi
if [ -z "$mp" ]; then
log "mounting $part -> $MNT_BASE"
mkdir -p "$MNT_BASE"
# exfat/ntfs are not always built into the platform kernel.
case "$fstype" in
exfat) grep -qw exfat /proc/filesystems || modprobe exfat 2>/dev/null ;;
ntfs) grep -qw ntfs3 /proc/filesystems || modprobe ntfs3 2>/dev/null ;;
esac
if ! mount -o rw,noatime "$part" "$MNT_BASE" 2>/dev/null; then
log "mount failed (fstype=$fstype)"
exit 4
fi
mp="$MNT_BASE"
# Verify it is actually writable (read-only media, dirty FAT, or full device).
if ! touch "$mp/.wtest" 2>/dev/null; then
log "mounted read-only or no space left"
umount "$mp"
exit 5
fi
rm -f "$mp/.wtest"
else
log "$part already mounted at $mp"
fi
if [ "$OUTPUT" = "both" ]; then
echo "$part $mp"
else
echo "$mp"
fi
exit 0
src/Script_ABC_Blanton/config.ttl
+24 -2
View File
@@ -1,12 +1,34 @@
;================================================================
; User Configuration
;================================================================
strTestcase="Margin"
project_name = "Blanton"
strTestcase="ENV" ;ENV,EMC,Margin...etc
EN_Margin = 1 ; 1: Enable Margin Test, 0: Disable Margin Test
EN_Margin = 0 ; 1: Enable Margin Test, 0: Disable Margin Test
EN_TX_FIR = 0 ; 1: Enable bcm_dsc_scan.sh collect port TX_FIR, 0: Disable (saves ~20 min: ScriptA and ScriptC each scan for ~10 min)
EN_log = 1 ; 1: Enable log, 0: Disable log
EN_timestamp = 1 ; 1: Enable timestamp in log, 0: Disable timestamp in log
;================================================================
; FAN_SPEED
;================================================================
FAN_SPEED = 100
;================================================================
; Switch Unit Population
;================================================================
SWB_UNIT0 = 1 ; 1 = this DUT has switch unit 0, wait for it ; 0 = skip
SWB_UNIT1 = 1 ; 1 = this DUT has switch unit 1, wait for it ; 0 = skip
;================================================================
; Stress_Test
;================================================================
SSD_RUNTIME = 3600 ; Unit seconds, 3600 = 1 hour
SSD_COUNT = 240 ; Total time = SSD_RUNTIME * SSD_COUNT
USB_RUNTIME = 3600 ; Unit seconds, 3600 = 1 hour
USB_COUNT = 240 ; Total time = USB_RUNTIME * USB_COUNT
BMC_USB_RUNTIME = 172800 ; Unit seconds, 172800 = 2 days
;================================================================
; Prompt Definitions
;================================================================
src/Script_ABC_Blanton/utils/setup_pmon.ttl
+6 -1
View File
@@ -15,4 +15,9 @@ sendln "show platform ssdhealth"
wait prompt_sonic_root
sendln "show platform leak status"
wait prompt_sonic_root
sendln "show platform leak channels"
sendln "show platform leak channels"
wait prompt_sonic_root
sendln "tpm-dut-test fru"
wait prompt_sonic_root
sendln "tpm-dut-test tpm-read"
src/Script_ABC_Blanton/utils/show_dmesg.ttl
+8 -5
View File
@@ -1,8 +1,11 @@
; All Event
wait prompt_sonic_root
sendln "date"
sendln "dmesg -T | grep -Ei 'error|fail(ed|ure)?|fault|critical|panic|timeout'"
; i2c event
wait prompt_sonic_root
sendln "dmesg | grep -i error"
sendln "dmesg -T | grep -Ei 'error|fail(ed|ure)?|fault|critical|panic|timeout' | grep -i i2c"
; Clear Event
wait prompt_sonic_root
sendln "dmesg | grep -i fail"
wait prompt_sonic_root
sendln "dmesg | grep -i warning"
sendln "dmesg -C"
src/Script_ABC_Blanton/utils/wait_init.ttl
+105
View File
@@ -0,0 +1,105 @@
; =============================================================================
; File : utils/wait_init.ttl
; Version : V3.0.0
; Date : 2026-08-21
; Author : ETWen
; =============================================================================
; Wait until every switch unit ENABLED below reports at least WT_MIN ports up:
; bcmcmd -n <u> -c ps | grep -w up | wc -l
;
; The DUT is not always fully populated. Which units exist is declared ONCE in
; config.ttl, so the traffic blocks in Script A/B/C and this wait agree:
; both units -> SWB_UNIT0 = 1 , SWB_UNIT1 = 1
; unit 0 only -> SWB_UNIT0 = 1 , SWB_UNIT1 = 0
; unit 1 only -> SWB_UNIT0 = 0 , SWB_UNIT1 = 1
; no unit -> SWB_UNIT0 = 0 , SWB_UNIT1 = 0 (bypass, returns immediately)
;
; Enter : prompt of the previous command is NOT consumed.
; Exit : a command has been sent, prompt NOT consumed (caller does the wait).
;
; Why the "PORTS0=" marker: TTL can only test for a string, so reading a count
; means capturing it. Wrapping the number in an echo gives waitregex a unique
; anchor, and the ECHO of the command cannot false-match -- it reads
; "PORTS0=$(bcmcmd ..." and the pattern requires a digit right after the "=".
;
; Version History:
; V1.0.0 2026-08-21 Initial Version (waited on "show platform temperature"
; until it stopped reporting "Thermal Not detected")
; V2.0.0 2026-08-21 Wait on the bcmcmd port-up count of BOTH switch units
; instead of the thermal sensors; proceed only when both
; are greater than WT_MIN (216).
; V3.0.0 2026-08-21 Add WT_UNIT0 / WT_UNIT1 so a partly populated DUT can
; be declared: wait on the enabled units only, and bypass
; entirely when neither is set.
; V3.1.0 2026-08-21 Take the population from SWB_UNIT0 / SWB_UNIT1 in
; config.ttl instead of local copies, so this wait and the
; traffic blocks cannot drift apart.
; V3.1.1 2026-08-25 WT_INTERVAL 10 -> 60. Fix the WT_MIN comments: the test
; has been `< WT_MIN` (at least) since the threshold was
; corrected, but the text still said "more than", which is
; the off-by-one that once hung Script A.
; =============================================================================
; ---- which units to wait for: SWB_UNIT0 / SWB_UNIT1, set in config.ttl ------
WT_MIN = 216 ; an enabled unit must report AT LEAST this many ports up
; (216 = 108 loopback pairs x 2, i.e. every cabled port)
WT_INTERVAL = 60 ; seconds between polls
; -----------------------------------------------------------------------------
timeout = 60 ; per-wait cap; bcmcmd ps is not instant
wait prompt_sonic_root
; nothing declared -> bypass
if SWB_UNIT0 = 0 then
if SWB_UNIT1 = 0 then
goto NO_UNITS
endif
endif
:WAIT_PORTS
wt_ok = 1
if SWB_UNIT0 = 1 then
wt_up0 = 0
sendln "echo PORTS0=$(bcmcmd -n 0 -c ps | grep -w up | wc -l)"
waitregex "PORTS0=[ ]*([0-9]+)"
if result = 1 then
str2int wt_up0 groupmatchstr1
endif
wait prompt_sonic_root
if wt_up0 < WT_MIN then
wt_ok = 0
endif
endif
if SWB_UNIT1 = 1 then
wt_up1 = 0
sendln "echo PORTS1=$(bcmcmd -n 1 -c ps | grep -w up | wc -l)"
waitregex "PORTS1=[ ]*([0-9]+)"
if result = 1 then
str2int wt_up1 groupmatchstr1
endif
wait prompt_sonic_root
if wt_up1 < WT_MIN then
wt_ok = 0
endif
endif
if wt_ok = 1 then
goto PORTS_OK
endif
pause WT_INTERVAL
goto WAIT_PORTS
; ---- exits ------------------------------------------------------------------
; Both leave exactly one prompt unconsumed, so the caller's next
; "wait prompt_sonic_root" has something to match.
:NO_UNITS
sendln "echo wait_init:no-switch-unit-declared,bypassing-port-wait"
goto DONE
:PORTS_OK
sendln ""
:DONE
timeout = 0
tools/100G_PRBS.txt
+63
View File
@@ -0,0 +1,63 @@
echo PORTS0=$(bcmcmd -n 0 -c ps | grep -w up | wc -l)
echo PORTS0=$(bcmcmd -n 1 -c ps | grep -w up | wc -l)
show interfaces status Ethernet513,Ethernet514
//100G Port 513
sudo sfputil lpmode off Ethernet513
bcmcmd -n 0 -c 'dsh -c "phy diag 268 prbs set p=3"'
bcmcmd -n 0 -c 'dsh -c "phy diag 268 prbsstat STArt Interval=5"'
bcmcmd -n 0 -c 'dsh -c "phy diag 268 prbs get"'
bcmcmd -n 0 -c 'dsh -c "phydiag 268 prbsstat Ber"'
bcmcmd -n 0 -c 'dsh -c "phydiag 268 prbsstat STOp"'
bcmcmd -n 0 -c 'dsh -c "phydiag 268 prbs clear"'
//100G Port 514
sudo sfputil lpmode off Ethernet514
bcmcmd -n 1 -c 'dsh -c "phy diag 268 prbs set p=3"'
bcmcmd -n 1 -c 'dsh -c "phy diag 268 prbsstat STArt Interval=5"'
bcmcmd -n 1 -c 'dsh -c "phy diag 268 prbs get"'
bcmcmd -n 1 -c 'dsh -c "phydiag 268 prbsstat Ber"'
bcmcmd -n 1 -c 'dsh -c "phydiag 268 prbsstat STOp"'
bcmcmd -n 1 -c 'dsh -c "phydiag 268 prbs clear"'
//100G Port 513
sudo sfputil lpmode off Ethernet513
sudo sfputil lpmode off Ethernet514
bcmcmd -n 0 -c 'dsh -c "phy diag 268 prbs set p=3"'
sleep 1
bcmcmd -n 1 -c 'dsh -c "phy diag 268 prbs set p=3"'
bcmcmd -n 0 -c 'dsh -c "phy diag 268 prbsstat STArt Interval=5"'
sleep 1
bcmcmd -n 1 -c 'dsh -c "phy diag 268 prbsstat STArt Interval=5"'
bcmcmd -n 0 -c 'dsh -c "phy diag 268 prbs get"'
sleep 1
bcmcmd -n 1 -c 'dsh -c "phy diag 268 prbs get"'
bcmcmd -n 0 -c 'dsh -c "phydiag 268 prbsstat Ber"'
sleep 1
bcmcmd -n 1 -c 'dsh -c "phydiag 268 prbsstat Ber"'
bcmcmd -n 0 -c 'dsh -c "phydiag 268 prbsstat STOp"'
sleep 1
bcmcmd -n 1 -c 'dsh -c "phydiag 268 prbsstat STOp"'
bcmcmd -n 0 -c 'dsh -c "phydiag 268 prbs clear"'
sleep 1
bcmcmd -n 1 -c 'dsh -c "phydiag 268 prbs clear"'
tools/100G_Traffic.txt
+12
View File
@@ -0,0 +1,12 @@
//Init
bcmcmd -n 0 -c 'mirror init'
bcmcmd -n 0 -c 'mirror port ce0 Mode=Ingress DestPort=ce0'
bcmcmd -n 0 -c 'vlan create 138'
bcmcmd -n 0 -c 'vlan add 138 pbm=ce0'
//Start
bcmcmd -n 0 -c 'tx 100 length=512 VLantag=138'
//stop
bcmcmd -n 0 -c 'mirror port ce0 Mode=Off'
bcmcmd -n 0 -c 'vlan remove 138 pbm=ce0'
tools/BER_Test.txt
+900
View File
@@ -0,0 +1,900 @@
bcmcmd -n 0 -c " dsh -c 'phydiag 1-24,40-96,112-168,184-240,256-259,270-308,310-327,342-380,382-399,414-452,454-471,486-524,526-543,558-565 prbs set p=3' "
bcmcmd -n 0 -c " dsh -c 'phydiag 1-24,40-96,112-168,184-240,256-259,270-308,310-327,342-380,382-399,414-452,454-471,486-524,526-543,558-565 prbs get' "
bcmcmd -n 0 -c " dsh -c 'phydiag 1-24,40-96,112-168,184-240,256-259,270-308,310-327,342-380,382-399,414-452,454-471,486-524,526-543,558-565 prbsstat STArt Interval=30' "
bcmcmd -n 0 -c " dsh -c 'phydiag 1-24,40-96,112-168,184-240,256-259,270-308,310-327,342-380,382-399,414-452,454-471,486-524,526-543,558-565 prbsstat Ber' "
bcmcmd -n 0 -c " dsh -c 'phydiag 1-24,40-96,112-168,184-240,256-259,270-308,310-327,342-380,382-399,414-452,454-471,486-524,526-543,558-565 prbsstat STOp' "
bcmcmd -n 0 -c " dsh -c 'phydiag 1-24,40-96,112-168,184-240,256-259,270-308,310-327,342-380,382-399,414-452,454-471,486-524,526-543,558-565 prbs clear' "
root@sonic:~# bcmcmd -n 0 -c " dsh -c 'phydiag 1-24,40-96,112-168,184-240,256-259,270-308,310-327,342-380,382-399,414-452,454-471,486-524,526-543,558-565 prbs set p=3' "
dsh -c 'phydiag 1-24,40-96,112-168,184-240,256-259,270-308,310-327,342-380,382-399,414-452,454-471,486-524,526-543,558-565 prbs set p=3'
drivshell>
root@sonic:~# bcmcmd -n 0 -c " dsh -c 'phydiag 1-24,40-96,112-168,184-240,256-259,270-308,310-327,342-380,382-399,414-452,454-471,486-524,526-543,558-565 prbs get' "
dsh -c 'phydiag 1-24,40-96,112-168,184-240,256-259,270-308,310-327,342-380,382-399,414-452,454-471,486-524,526-543,558-565 prbs get'
1 : PRBS OK!has been unlocked since last call
2 : PRBS OK!has been unlocked since last call
3 : PRBS OK!has been unlocked since last call
4 : PRBS OK!has been unlocked since last call
5 : PRBS OK!has been unlocked since last call
6 : PRBS OK!has been unlocked since last call
7 : PRBS OK!has been unlocked since last call
8 : PRBS OK!has been unlocked since last call
18 : PRBS OK!has been unlocked since last call
19 : PRBS OK!has been unlocked since last call
20 : PRBS OK!has been unlocked since last call
21 : PRBS OK!has been unlocked since last call
22 : PRBS OK!has been unlocked since last call
23 : PRBS OK!has been unlocked since last call
24 : PRBS OK!has been unlocked since last call
40 : PRBS OK!has been unlocked since last call
41 : PRBS OK!has been unlocked since last call
42 : PRBS OK!has been unlocked since last call
43 : PRBS OK!has been unlocked since last call
54 : PRBS OK!has been unlocked since last call
55 : PRBS OK!has been unlocked since last call
56 : PRBS OK!has been unlocked since last call
57 : PRBS OK!has been unlocked since last call
58 : PRBS OK!has been unlocked since last call
59 : PRBS OK!has been unlocked since last call
60 : PRBS OK!has been unlocked since last call
61 : PRBS OK!has been unlocked since last call
72 : PRBS OK!has been unlocked since last call
73 : PRBS OK!has been unlocked since last call
74 : PRBS OK!has been unlocked since last call
75 : PRBS OK!has been unlocked since last call
76 : PRBS OK!has been unlocked since last call
77 : PRBS OK!has been unlocked since last call
78 : PRBS OK!has been unlocked since last call
79 : PRBS OK!has been unlocked since last call
90 : PRBS OK!has been unlocked since last call
91 : PRBS OK!has been unlocked since last call
92 : PRBS OK!has been unlocked since last call
93 : PRBS OK!has been unlocked since last call
94 : PRBS OK!has been unlocked since last call
95 : PRBS OK!has been unlocked since last call
96 : PRBS OK!has been unlocked since last call
112 : PRBS OK!has been unlocked since last call
113 : PRBS OK!has been unlocked since last call
114 : PRBS OK!has been unlocked since last call
115 : PRBS OK!has been unlocked since last call
126 : PRBS OK!has been unlocked since last call
127 : PRBS OK!has been unlocked since last call
128 : PRBS OK!has been unlocked since last call
129 : PRBS OK!has been unlocked since last call
130 : PRBS OK!has been unlocked since last call
131 : PRBS OK!has been unlocked since last call
132 : PRBS OK!has been unlocked since last call
133 : PRBS OK!has been unlocked since last call
144 : PRBS OK!has been unlocked since last call
145 : PRBS OK!has been unlocked since last call
146 : PRBS OK!has been unlocked since last call
147 : PRBS OK!has been unlocked since last call
148 : PRBS OK!has been unlocked since last call
149 : PRBS OK!has been unlocked since last call
150 : PRBS OK!has been unlocked since last call
151 : PRBS OK!has been unlocked since last call
162 : PRBS OK!has been unlocked since last call
163 : PRBS OK!has been unlocked since last call
164 : PRBS OK!has been unlocked since last call
165 : PRBS OK!has been unlocked since last call
166 : PRBS OK!has been unlocked since last call
167 : PRBS OK!has been unlocked since last call
168 : PRBS OK!has been unlocked since last call
184 : PRBS OK!has been unlocked since last call
185 : PRBS OK!has been unlocked since last call
186 : PRBS OK!has been unlocked since last call
187 : PRBS OK!has been unlocked since last call
198 : PRBS OK!has been unlocked since last call
199 : PRBS OK!has been unlocked since last call
200 : PRBS OK!has been unlocked since last call
201 : PRBS OK!has been unlocked since last call
202 : PRBS OK!has been unlocked since last call
203 : PRBS OK!has been unlocked since last call
204 : PRBS OK!has been unlocked since last call
205 : PRBS OK!has been unlocked since last call
216 : PRBS OK!has been unlocked since last call
217 : PRBS OK!has been unlocked since last call
218 : PRBS OK!has been unlocked since last call
219 : PRBS OK!has been unlocked since last call
220 : PRBS OK!has been unlocked since last call
221 : PRBS OK!has been unlocked since last call
222 : PRBS OK!has been unlocked since last call
223 : PRBS OK!has been unlocked since last call
234 : PRBS OK!has been unlocked since last call
235 : PRBS OK!has been unlocked since last call
236 : PRBS OK!has been unlocked since last call
237 : PRBS OK!has been unlocked since last call
238 : PRBS OK!has been unlocked since last call
239 : PRBS OK!has been unlocked since last call
240 : PRBS OK!has been unlocked since last call
256 : PRBS OK!has been unlocked since last call
257 : PRBS OK!has been unlocked since last call
258 : PRBS OK!has been unlocked since last call
259 : PRBS OK!has been unlocked since last call
270 : PRBS OK!has been unlocked since last call
271 : PRBS OK!has been unlocked since last call
272 : PRBS OK!has been unlocked since last call
273 : PRBS OK!has been unlocked since last call
274 : PRBS OK!has been unlocked since last call
275 : PRBS OK!has been unlocked since last call
276 : PRBS OK!has been unlocked since last call
277 : PRBS OK!has been unlocked since last call
288 : PRBS OK!has been unlocked since last call
289 : PRBS OK!has been unlocked since last call
290 : PRBS OK!has been unlocked since last call
291 : PRBS OK!has been unlocked since last call
292 : PRBS OK!has been unlocked since last call
293 : PRBS OK!has been unlocked since last call
294 : PRBS OK!has been unlocked since last call
295 : PRBS OK!has been unlocked since last call
306 : PRBS OK!has been unlocked since last call
307 : PRBS OK!has been unlocked since last call
308 : PRBS OK!has been unlocked since last call
310 : PRBS OK!has been unlocked since last call
311 : PRBS OK!has been unlocked since last call
312 : PRBS OK!has been unlocked since last call
313 : PRBS OK!has been unlocked since last call
324 : PRBS OK!has been unlocked since last call
325 : PRBS OK!has been unlocked since last call
326 : PRBS OK!has been unlocked since last call
327 : PRBS OK!has been unlocked since last call
342 : PRBS OK!has been unlocked since last call
343 : PRBS OK!has been unlocked since last call
344 : PRBS OK!has been unlocked since last call
345 : PRBS OK!has been unlocked since last call
346 : PRBS OK!has been unlocked since last call
347 : PRBS OK!has been unlocked since last call
348 : PRBS OK!has been unlocked since last call
349 : PRBS OK!has been unlocked since last call
360 : PRBS OK!has been unlocked since last call
361 : PRBS OK!has been unlocked since last call
362 : PRBS OK!has been unlocked since last call
363 : PRBS OK!has been unlocked since last call
364 : PRBS OK!has been unlocked since last call
365 : PRBS OK!has been unlocked since last call
366 : PRBS OK!has been unlocked since last call
367 : PRBS OK!has been unlocked since last call
378 : PRBS OK!has been unlocked since last call
379 : PRBS OK!has been unlocked since last call
380 : PRBS OK!has been unlocked since last call
382 : PRBS OK!has been unlocked since last call
383 : PRBS OK!has been unlocked since last call
384 : PRBS OK!has been unlocked since last call
385 : PRBS OK!has been unlocked since last call
396 : PRBS OK!has been unlocked since last call
397 : PRBS OK!has been unlocked since last call
398 : PRBS OK!has been unlocked since last call
399 : PRBS OK!has been unlocked since last call
414 : PRBS OK!has been unlocked since last call
415 : PRBS OK!has been unlocked since last call
416 : PRBS OK!has been unlocked since last call
417 : PRBS OK!has been unlocked since last call
418 : PRBS OK!has been unlocked since last call
419 : PRBS OK!has been unlocked since last call
420 : PRBS OK!has been unlocked since last call
421 : PRBS OK!has been unlocked since last call
432 : PRBS OK!has been unlocked since last call
433 : PRBS OK!has been unlocked since last call
434 : PRBS OK!has been unlocked since last call
435 : PRBS OK!has been unlocked since last call
436 : PRBS OK!has been unlocked since last call
437 : PRBS OK!has been unlocked since last call
438 : PRBS OK!has been unlocked since last call
439 : PRBS OK!has been unlocked since last call
450 : PRBS OK!has been unlocked since last call
451 : PRBS OK!has been unlocked since last call
452 : PRBS OK!has been unlocked since last call
454 : PRBS OK!has been unlocked since last call
455 : PRBS OK!has been unlocked since last call
456 : PRBS OK!has been unlocked since last call
457 : PRBS OK!has been unlocked since last call
468 : PRBS OK!has been unlocked since last call
469 : PRBS OK!has been unlocked since last call
470 : PRBS OK!has been unlocked since last call
471 : PRBS OK!has been unlocked since last call
486 : PRBS OK!has been unlocked since last call
487 : PRBS OK!has been unlocked since last call
488 : PRBS OK!has been unlocked since last call
489 : PRBS OK!has been unlocked since last call
490 : PRBS OK!has been unlocked since last call
491 : PRBS OK!has been unlocked since last call
492 : PRBS OK!has been unlocked since last call
493 : PRBS OK!has been unlocked since last call
504 : PRBS OK!has been unlocked since last call
505 : PRBS OK!has been unlocked since last call
506 : PRBS OK!has been unlocked since last call
507 : PRBS OK!has been unlocked since last call
508 : PRBS OK!has been unlocked since last call
509 : PRBS OK!has been unlocked since last call
510 : PRBS OK!has been unlocked since last call
511 : PRBS OK!has been unlocked since last call
522 : PRBS OK!has been unlocked since last call
523 : PRBS OK!has been unlocked since last call
524 : PRBS OK!has been unlocked since last call
526 : PRBS OK!has been unlocked since last call
527 : PRBS OK!has been unlocked since last call
528 : PRBS OK!has been unlocked since last call
529 : PRBS OK!has been unlocked since last call
540 : PRBS OK!has been unlocked since last call
541 : PRBS OK!has been unlocked since last call
542 : PRBS OK!has been unlocked since last call
543 : PRBS OK!has been unlocked since last call
558 : PRBS OK!has been unlocked since last call
559 : PRBS OK!has been unlocked since last call
560 : PRBS OK!has been unlocked since last call
561 : PRBS OK!has been unlocked since last call
562 : PRBS OK!has been unlocked since last call
563 : PRBS OK!has been unlocked since last call
564 : PRBS OK!has been unlocked since last call
565 : PRBS OK!has been unlocked since last call
drivshell>
root@sonic:~#
root@sonic:~#
root@sonic:~#
root@sonic:~# bcmcmd -n 0 -c " dsh -c 'phydiag 1-24,40-96,112-168,184-240,256-259,270-308,310-327,342-380,382-399,414-452,454-471,486-524,526-543,558-565 prbssat STArt Interval=30' "
dsh -c 'phydiag 1-24,40-96,112-168,184-240,256-259,270-308,310-327,342-380,382-399,414-452,454-471,486-524,526-543,558-565 prbsstat STArt Interval=30'
PRBSStat thread started ...
drivshell>
root@sonic:~# sleep 30
root@sonic:~# bcmcmd -n 0 -c " dsh -c 'phydiag 1-24,40-96,112-168,184-240,256-259,270-308,310-327,342-380,382-399,414-452,454-471,486-524,526-543,558-565 prbsstat Ber' "
dsh -c 'phydiag 1-24,40-96,112-168,184-240,256-259,270-308,310-327,342-380,382-399,414-452,454-471,486-524,526-543,558-565 prbsstat Ber'
port BER
====
1[0] : 3.53e-11
1[1] : 4.00e-11
====
2[0] : 1.64e-10
2[1] : 8.80e-11
====
3[0] : 6.01e-11
3[1] : 3.45e-12
====
4[0] : 7.69e-11
4[1] : 2.60e-11
====
5[0] : 9.41e-13
5[1] : 6.27e-13
====
6[0] : 3.14e-13
6[1] : 6.27e-13
====
7[0] : 2.98e-12
7[1] : 2.20e-12
====
8[0] : 4.24e-12
8[1] : 9.41e-13
====
18[0] : 7.84e-13
18[1] : 2.04e-12
====
19[0] : 1.57e-13
19[1] : 1.73e-12
====
20[0] : 1.19e-11
20[1] : 1.41e-12
====
21[0] : 5.65e-12
21[1] : 7.69e-12
====
22[0] : 1.54e-11
22[1] : 7.84e-13
====
23[0] : 1.10e-12
23[1] : 2.35e-12
====
24[0] : 2.51e-12
24[1] : 1.41e-12
====
40[0] : 2.23e-11
40[1] : 2.35e-11
====
41[0] : 3.76e-12
41[1] : 4.55e-12
====
42[0] : 7.84e-12
42[1] : 3.76e-12
====
43[0] : 5.02e-12
43[1] : 1.35e-11
====
54[0] : 7.84e-13
54[1] : 6.27e-13
====
55[0] : 1.57e-13
55[1] : 1.57e-13
====
56[0] : 3.14e-13
56[1] : 4.71e-13
====
57[0] : 4.71e-12
57[1] : 6.27e-13
====
58[0] : 5.80e-12
58[1] : 4.24e-11
====
59[0] : 6.90e-12
59[1] : 7.84e-13
====
60[0] : 1.13e-11
60[1] : 1.10e-12
====
61[0] : 2.35e-12
61[1] : 5.49e-12
====
72[0] : 4.39e-11
72[1] : 5.49e-12
====
73[0] : 7.22e-12
73[1] : 8.00e-12
====
74[0] : 3.29e-12
74[1] : 1.25e-12
====
75[0] : 5.96e-12
75[1] : 3.45e-12
====
76[0] : 1.57e-13
76[1] : 1.41e-12
====
77[0] : 2.20e-12
77[1] : 1.57e-13
====
78[0] : 2.67e-12
78[1] : 1.41e-12
====
79[0] : 6.27e-13
79[1] : 3.14e-13
====
90[0] : 3.61e-12
90[1] : 1.91e-11
====
91[0] : 1.88e-12
91[1] : 4.24e-12
====
92[0] : 8.47e-12
92[1] : 4.08e-12
====
93[0] : 3.92e-12
93[1] : 1.82e-11
====
94[0] : 1.57e-13
94[1] : 1.41e-12
====
95[0] : 1.57e-13
95[1] : 1.57e-13
====
96[0] : 1.57e-13
96[1] : 4.71e-13
====
112[0] : 4.08e-12
112[1] : 2.04e-12
====
113[0] : 4.08e-12
113[1] : 3.29e-12
====
114[0] : 7.84e-13
114[1] : 9.41e-13
====
115[0] : 6.27e-13
115[1] : 1.88e-12
====
126[0] : 2.82e-12
126[1] : 1.57e-13
====
127[0] : 1.57e-13
127[1] : 4.71e-13
====
128[0] : 3.45e-12
128[1] : 3.14e-13
====
129[0] : 4.71e-13
129[1] : 6.27e-13
====
130[0] : 2.67e-12
130[1] : 1.57e-12
====
131[0] : 2.35e-12
131[1] : 6.12e-12
====
132[0] : 3.33e-11
132[1] : 5.02e-12
====
133[0] : 9.88e-12
133[1] : 6.90e-12
====
144[0] : 7.84e-13
144[1] : 7.22e-12
====
145[0] : 3.29e-12
145[1] : 6.12e-12
====
146[0] : 1.02e-11
146[1] : 1.57e-12
====
147[0] : 1.57e-12
147[1] : 3.92e-12
====
148[0] : 1.57e-13
148[1] : 1.25e-12
====
149[0] : 1.57e-13
149[1] : 1.57e-13
====
150[0] : 6.27e-13
150[1] : 1.57e-13
====
151[0] : 6.27e-13
151[1] : 3.14e-13
====
162[0] : 1.57e-13
162[1] : 6.27e-13
====
163[0] : 3.14e-13
163[1] : 1.57e-12
====
164[0] : 1.25e-12
164[1] : 2.20e-12
====
165[0] : 4.71e-13
165[1] : 2.67e-12
====
166[0] : 1.57e-13
166[1] : 3.14e-13
====
167[0] : 1.57e-13
167[1] : 1.57e-12
====
168[0] : 4.71e-13
168[1] : 1.57e-13
====
184[0] : 4.11e-10
184[1] : 3.12e-10
====
185[0] : 1.71e-08
185[1] : 3.13e-09
====
186[0] : 2.05e-10
186[1] : 2.27e-09
====
187[0] : 3.94e-11
187[1] : 2.97e-09
====
198[0] : 3.44e-11
198[1] : 3.29e-11
====
199[0] : 7.53e-10
199[1] : 1.66e-10
====
200[0] : 4.38e-11
200[1] : 3.81e-11
====
201[0] : 5.43e-11
201[1] : 1.95e-11
====
202[0] : 1.82e-10
202[1] : 5.74e-09
====
203[0] : 1.98e-08
203[1] : 5.05e-09
====
204[0] : 2.09e-10
204[1] : 5.71e-11
====
205[0] : 6.59e-11
205[1] : 5.21e-11
====
216[0] : 4.71e-13
216[1] : 6.27e-13
====
217[0] : 1.57e-12
217[1] : 6.27e-13
====
218[0] : 3.14e-13
218[1] : 1.57e-13
====
219[0] : 1.41e-12
219[1] : 1.41e-12
====
220[0] : 1.57e-13
220[1] : 1.57e-13
====
221[0] : 1.57e-13
221[1] : 1.57e-13
====
222[0] : 1.57e-13
222[1] : 3.14e-13
====
223[0] : 9.41e-13
223[1] : 1.57e-13
====
234[0] : 1.57e-13
234[1] : 4.71e-13
====
235[0] : 3.14e-13
235[1] : 1.25e-12
====
236[0] : 4.71e-13
236[1] : 1.57e-13
====
237[0] : 3.14e-13
237[1] : 1.57e-13
====
238[0] : 1.57e-13
238[1] : 1.57e-13
====
239[0] : 3.14e-13
239[1] : 3.14e-13
====
240[0] : 2.35e-12
240[1] : 1.57e-13
====
256[0] : 4.24e-12
256[1] : 7.37e-12
====
257[0] : 4.71e-13
257[1] : 7.69e-12
====
258[0] : 1.09e-09
258[1] : 6.25e-09
====
259[0] : 1.66e-11
259[1] : 1.02e-10
====
270[0] : 1.10e-12
270[1] : 9.25e-12
====
271[0] : 5.33e-12
271[1] : 1.62e-11
====
272[0] : 1.37e-10
272[1] : 9.15e-10
====
273[0] : 9.41e-12
273[1] : 1.90e-11
====
274[0] : 1.57e-13
274[1] : 2.04e-12
====
275[0] : 1.73e-12
275[1] : 2.20e-12
====
276[0] : 1.30e-10
276[1] : 1.36e-10
====
277[0] : 1.41e-12
277[1] : 2.04e-12
====
288[0] : 4.71e-13
288[1] : 4.71e-13
====
289[0] : 3.14e-13
289[1] : 2.20e-12
====
290[0] : 3.14e-13
290[1] : 1.57e-13
====
291[0] : 3.29e-11
291[1] : 1.08e-11
====
292[0] : 3.14e-13
292[1] : 6.27e-13
====
293[0] : 1.57e-13
293[1] : 5.80e-12
====
294[0] : 5.96e-12
294[1] : 1.88e-12
====
295[0] : 1.27e-11
295[1] : 1.21e-11
====
306[0] : 4.71e-13
306[1] : 1.10e-12
====
307[0] : 7.84e-13
307[1] : 5.02e-12
====
308[0] : 3.92e-12
308[1] : 2.67e-12
====
310[0] : 3.92e-12
310[1] : 1.25e-12
====
311[0] : 2.51e-12
311[1] : 6.27e-13
====
312[0] : 2.20e-12
312[1] : 6.75e-12
====
313[0] : 5.43e-11
313[1] : 2.18e-10
====
324[0] : 1.46e-11
324[1] : 1.27e-11
====
325[0] : 2.67e-12
325[1] : 7.94e-11
====
326[0] : 5.35e-11
326[1] : 2.35e-12
====
327[0] : 7.15e-11
327[1] : 1.11e-11
====
342[0] : 2.04e-12
342[1] : 1.41e-12
====
343[0] : 3.14e-13
343[1] : 3.61e-12
====
344[0] : 1.41e-12
344[1] : 1.57e-13
====
345[0] : 1.25e-12
345[1] : 1.41e-12
====
346[0] : 3.14e-13
346[1] : 1.57e-13
====
347[0] : 1.57e-13
347[1] : 3.14e-13
====
348[0] : 1.57e-13
348[1] : 3.14e-13
====
349[0] : 1.73e-12
349[1] : 2.21e-11
====
360[0] : 8.78e-12
360[1] : 1.24e-11
====
361[0] : 7.22e-12
361[1] : 1.87e-11
====
362[0] : 1.30e-11
362[1] : 1.74e-11
====
363[0] : 1.51e-10
363[1] : 2.85e-11
====
364[0] : 1.38e-11
364[1] : 1.17e-10
====
365[0] : 3.95e-11
365[1] : 2.67e-12
====
366[0] : 4.24e-12
366[1] : 5.49e-12
====
367[0] : 1.71e-10
367[1] : 1.40e-11
====
378[0] : 1.41e-11
378[1] : 3.50e-11
====
379[0] : 7.67e-11
379[1] : 1.03e-09
====
380[0] : 2.16e-11
380[1] : 1.62e-11
====
382[0] : 4.35e-11
382[1] : 1.81e-10
====
383[0] : 2.28e-10
383[1] : 1.41e-10
====
384[0] : 7.22e-12
384[1] : 5.71e-11
====
385[0] : 3.36e-11
385[1] : 2.16e-11
====
396[0] : 2.82e-12
396[1] : 4.55e-12
====
397[0] : 1.27e-11
397[1] : 1.41e-11
====
398[0] : 2.99e-10
398[1] : 5.80e-11
====
399[0] : 2.51e-11
399[1] : 1.11e-11
====
414[0] : 4.55e-12
414[1] : 8.31e-12
====
415[0] : 1.57e-13
415[1] : 9.41e-13
====
416[0] : 6.27e-12
416[1] : 5.96e-12
====
417[0] : 2.20e-12
417[1] : 1.88e-12
====
418[0] : 6.27e-13
418[1] : 1.25e-12
====
419[0] : 1.57e-13
419[1] : 1.41e-12
====
420[0] : 3.14e-13
420[1] : 2.82e-12
====
421[0] : 4.39e-12
421[1] : 1.16e-11
====
432[0] : 4.71e-13
432[1] : 6.27e-13
====
433[0] : 4.71e-13
433[1] : 1.57e-12
====
434[0] : 4.71e-13
434[1] : 1.57e-13
====
435[0] : 1.25e-12
435[1] : 1.57e-13
====
436[0] : 1.57e-13
436[1] : 1.57e-13
====
437[0] : 1.57e-13
437[1] : 4.71e-13
====
438[0] : 7.84e-13
438[1] : 1.41e-12
====
439[0] : 1.41e-12
439[1] : 1.10e-12
====
450[0] : 6.27e-13
450[1] : 4.71e-13
====
451[0] : 1.57e-13
451[1] : 1.25e-12
====
452[0] : 1.10e-12
452[1] : 7.84e-13
====
454[0] : 1.10e-12
454[1] : 1.88e-12
====
455[0] : 6.27e-13
455[1] : 1.57e-12
====
456[0] : 1.88e-12
456[1] : 9.41e-13
====
457[0] : 7.84e-13
457[1] : 4.71e-13
====
468[0] : 6.27e-13
468[1] : 9.41e-13
====
469[0] : 2.67e-12
469[1] : 4.08e-12
====
470[0] : 3.14e-13
470[1] : 4.71e-13
====
471[0] : 3.14e-13
471[1] : 7.84e-13
====
486[0] : 1.73e-12
486[1] : 1.57e-12
====
487[0] : 1.10e-12
487[1] : 2.82e-12
====
488[0] : 4.71e-13
488[1] : 4.71e-13
====
489[0] : 9.41e-13
489[1] : 3.14e-13
====
490[0] : 1.57e-13
490[1] : 3.14e-13
====
491[0] : 3.14e-13
491[1] : 1.57e-13
====
492[0] : 9.41e-13
492[1] : 1.10e-12
====
493[0] : 7.84e-13
493[1] : 2.98e-12
====
504[0] : 4.71e-13
504[1] : 3.14e-13
====
505[0] : 1.57e-13
505[1] : 7.84e-13
====
506[0] : 4.71e-13
506[1] : 1.57e-13
====
507[0] : 3.14e-13
507[1] : 1.57e-13
====
508[0] : 2.04e-12
508[1] : 1.41e-12
====
509[0] : 9.41e-13
509[1] : 7.84e-13
====
510[0] : 1.57e-13
510[1] : 6.27e-13
====
511[0] : 6.27e-13
511[1] : 4.71e-13
====
522[0] : 2.35e-12
522[1] : 1.57e-13
====
523[0] : 3.14e-13
523[1] : 6.27e-13
====
524[0] : 7.84e-13
524[1] : 1.57e-13
====
526[0] : 7.84e-13
526[1] : 3.14e-13
====
527[0] : 1.41e-12
527[1] : 4.71e-13
====
528[0] : 3.14e-13
528[1] : 9.41e-13
====
529[0] : 4.71e-13
529[1] : 1.57e-13
====
540[0] : 6.27e-13
540[1] : 1.25e-12
====
541[0] : 3.14e-13
541[1] : 1.10e-12
====
542[0] : 2.98e-12
542[1] : 6.27e-13
====
543[0] : 2.98e-12
543[1] : 3.14e-13
====
558[0] : 9.41e-13
558[1] : 1.10e-12
====
559[0] : 3.29e-12
559[1] : 2.04e-12
====
560[0] : 1.57e-13
560[1] : 1.57e-13
====
561[0] : 2.35e-12
561[1] : 4.71e-13
====
562[0] : 1.57e-13
562[1] : 1.57e-13
====
563[0] : 1.57e-13
563[1] : 4.71e-13
====
564[0] : 1.41e-12
564[1] : 7.84e-13
====
565[0] : 4.55e-12
565[1] : 1.57e-13
====
drivshell>
root@sonic:~# bcmcmd -n 0 -c " dsh -c 'phydiag 1-24,40-96,112-168,184-240,256-259,270-308,310-327,342-380,382-399,414-452,454-471,486-524,526-543,558-565 prbssat STOp' "
dsh -c 'phydiag 1-24,40-96,112-168,184-240,256-259,270-308,310-327,342-380,382-399,414-452,454-471,486-524,526-543,558-565 prbsstat STOp'
Stopping PRBSStat thread
drivshell>
root@sonic:~# bcmcmd -n 0 -c " dsh -c 'phydiag 1-24,40-96,112-168,184-240,256-259,270-308,310-327,342-380,382-399,414-452,454-471,486-524,526-543,558-565 prbs clear' "
dsh -c 'phydiag 1-24,40-96,112-168,184-240,256-259,270-308,310-327,342-380,382-399,414-452,454-471,486-524,526-543,558-565 prbs clear'
drivshell>
root@sonic:~#
tools/Multiphase_Netname
+40
View File
@@ -0,0 +1,40 @@
SWB0_0V9_ANLG0
SWB0_0V9_ANLG1
SWB0_0V75_ANLG0
SWB0_0V75_ANLG1
SWB0_PHYTILE_P0
SWB0_PHYTILE_P1
SWB0_PHYTILE_P2
SWB0_PHYTILE_P3
SWB0_PHYTILE_P4
SWB0_PHYTILE_P5
SWB0_PHYTILE_P6
SWB0_PHYTILE_P7
SWB0_PVDD1V5_CNDR0
SWB0_PVDD1V5_CNDR1
SWB0_PVDDA_PHYT0
SWB0_PVDDA_PHYT1
SWB0_PVDDA_PHYT2
SWB0_PVDDA_PHYT3
SWB0_TH6_CORE
SWB1_0V9_ANLG0
SWB1_0V9_ANLG1
SWB1_0V75_ANLG0
SWB1_0V75_ANLG1
SWB1_PHYTILE_P0
SWB1_PHYTILE_P1
SWB1_PHYTILE_P2
SWB1_PHYTILE_P3
SWB1_PHYTILE_P4
SWB1_PHYTILE_P5
SWB1_PHYTILE_P6
SWB1_PHYTILE_P7
SWB1_PVDD1V5_CNDR0
SWB1_PVDD1V5_CNDR1
SWB1_PVDDA_PHYT0
SWB1_PVDDA_PHYT1
SWB1_PVDDA_PHYT2
SWB1_PVDDA_PHYT3
SWB1_TH6_CORE
tools/Multiphase_Normal.txt
+188
View File
@@ -0,0 +1,188 @@
//0.900V (nominal)
i2cset -f -y 13 0x25 0x00 0
i2ctransfer -f -y 13 w3@0x25 0x21 0x83 0x00
i2cset -f -y 13 0x25 0x00 2
i2ctransfer -f -y 13 w3@0x25 0x0D 0x74 0x10
//0.900V (nominal)
i2cset -f -y 15 0x26 0x00 0
i2ctransfer -f -y 15 w3@0x26 0x21 0x83 0x00
i2cset -f -y 15 0x26 0x00 2
i2ctransfer -f -y 15 w3@0x26 0x0D 0x74 0x10
//0.75V (nominal)
i2cset -f -y 13 0x25 0x00 1
i2ctransfer -f -y 13 w3@0x25 0x21 0x65 0x00
i2cset -f -y 13 0x25 0x00 2
i2ctransfer -f -y 13 w3@0x25 0x1D 0x5A 0x06
//0.75V (nominal)
i2cset -f -y 15 0x26 0x00 1
i2ctransfer -f -y 15 w3@0x26 0x21 0x65 0x00
i2cset -f -y 15 0x26 0x00 2
i2ctransfer -f -y 15 w3@0x26 0x1D 0x5A 0x06
//0.75V (nominal)
i2cset -f -y 13 0x21 0x00 0
i2ctransfer -f -y 13 w3@0x21 0x21 0x65 0x00
i2cset -f -y 13 0x21 0x00 2
i2ctransfer -f -y 13 w3@0x21 0x0D 0xB2 0x0C
//0.75V (nominal)
i2cset -f -y 13 0x21 0x00 1
i2ctransfer -f -y 13 w3@0x21 0x21 0x65 0x00
i2cset -f -y 13 0x21 0x00 2
i2ctransfer -f -y 13 w3@0x21 0x1D 0x5A 0x06
//0.75V (nominal)
i2cset -f -y 13 0x22 0x00 0
i2ctransfer -f -y 13 w3@0x22 0x21 0x65 0x00
i2cset -f -y 13 0x22 0x00 2
i2ctransfer -f -y 13 w3@0x22 0x0D 0xB2 0x0C
//0.75V (nominal)
i2cset -f -y 13 0x22 0x00 1
i2ctransfer -f -y 13 w3@0x22 0x21 0x65 0x00
i2cset -f -y 13 0x22 0x00 2
i2ctransfer -f -y 13 w3@0x22 0x1D 0x5A 0x06
//0.75V (nominal)
i2cset -f -y 15 0x23 0x00 0
i2ctransfer -f -y 15 w3@0x23 0x21 0x65 0x00
i2cset -f -y 15 0x23 0x00 2
i2ctransfer -f -y 15 w3@0x23 0x0D 0xB2 0x0C
//0.75V (nominal)
i2cset -f -y 15 0x23 0x00 1
i2ctransfer -f -y 15 w3@0x23 0x21 0x65 0x00
i2cset -f -y 15 0x23 0x00 2
i2ctransfer -f -y 15 w3@0x23 0x1D 0x5A 0x06
//0.75V (nominal)
i2cset -f -y 15 0x24 0x00 0
i2ctransfer -f -y 15 w3@0x24 0x21 0x65 0x00
i2cset -f -y 15 0x24 0x00 2
i2ctransfer -f -y 15 w3@0x24 0x0D 0xB2 0x0C
//0.75V (nominal)
i2cset -f -y 15 0x24 0x00 1
i2ctransfer -f -y 15 w3@0x24 0x21 0x65 0x00
i2cset -f -y 15 0x24 0x00 2
i2ctransfer -f -y 15 w3@0x24 0x1D 0x5A 0x06
//1.5V (nominal)
i2cset -f -y 13 0x29 0x00 0
i2ctransfer -f -y 13 w3@0x29 0x21 0xFB 0x00
i2cset -f -y 13 0x29 0x00 2
i2ctransfer -f -y 13 w3@0x29 0x0D 0x71 0x1F
//1.5V (nominal)
i2cset -f -y 13 0x29 0x00 1
i2ctransfer -f -y 13 w3@0x29 0x21 0xFB 0x00
i2cset -f -y 13 0x29 0x00 2
i2ctransfer -f -y 13 w3@0x29 0x1D 0xB9 0x0F
//0.720V
i2cset -f -y 13 0x27 0x00 0
i2ctransfer -f -y 13 w3@0x27 0x21 0x5F 0x00
i2cset -f -y 13 0x27 0x00 2
i2ctransfer -f -y 13 w3@0x27 0x0D 0xF4 0x0B
//0.720V
i2cset -f -y 13 0x27 0x00 1
i2ctransfer -f -y 13 w3@0x27 0x21 0x5F 0x00
i2cset -f -y 13 0x27 0x00 2
i2ctransfer -f -y 13 w3@0x27 0x1D 0xFC 0x05
//0.720V
i2cset -f -y 15 0x28 0x00 0
i2ctransfer -f -y 15 w3@0x28 0x21 0x5F 0x00
i2cset -f -y 15 0x28 0x00 2
i2ctransfer -f -y 15 w3@0x28 0x0D 0xF4 0x0B
//0.720V
i2cset -f -y 15 0x28 0x00 1
i2ctransfer -f -y 15 w3@0x28 0x21 0x5F 0x00
i2cset -f -y 15 0x28 0x00 2
i2ctransfer -f -y 15 w3@0x28 0x1D 0xFC 0x05
//0.8V(nominal) , 0.8591V with load line
i2cset -f -y 13 0x20 0x00 0
i2ctransfer -f -y 13 w3@0x20 0x21 0x57 0x01
//0.900V (nominal)
i2cset -f -y 14 0x25 0x00 0
i2ctransfer -f -y 14 w3@0x25 0x21 0x83 0x00
i2cset -f -y 14 0x25 0x00 2
i2ctransfer -f -y 14 w3@0x25 0x0D 0x74 0x10
//0.900V (nominal)
i2cset -f -y 16 0x26 0x00 0
i2ctransfer -f -y 16 w3@0x26 0x21 0x83 0x00
i2cset -f -y 16 0x26 0x00 2
i2ctransfer -f -y 16 w3@0x26 0x0D 0x74 0x10
//0.75V (nominal)
i2cset -f -y 14 0x25 0x00 1
i2ctransfer -f -y 14 w3@0x25 0x21 0x65 0x00
i2cset -f -y 14 0x25 0x00 2
i2ctransfer -f -y 14 w3@0x25 0x1D 0x5A 0x06
//0.75V (nominal)
i2cset -f -y 16 0x26 0x00 1
i2ctransfer -f -y 16 w3@0x26 0x21 0x65 0x00
i2cset -f -y 16 0x26 0x00 2
i2ctransfer -f -y 16 w3@0x26 0x1D 0x5A 0x06
//0.75V (nominal)
i2cset -f -y 14 0x21 0x00 0
i2ctransfer -f -y 14 w3@0x21 0x21 0x65 0x00
i2cset -f -y 14 0x21 0x00 2
i2ctransfer -f -y 14 w3@0x21 0x0D 0xB2 0x0C
//0.75V (nominal)
i2cset -f -y 14 0x21 0x00 1
i2ctransfer -f -y 14 w3@0x21 0x21 0x65 0x00
i2cset -f -y 14 0x21 0x00 2
i2ctransfer -f -y 14 w3@0x21 0x1D 0x5A 0x06
//0.75V (nominal)
i2cset -f -y 14 0x22 0x00 0
i2ctransfer -f -y 14 w3@0x22 0x21 0x65 0x00
i2cset -f -y 14 0x22 0x00 2
i2ctransfer -f -y 14 w3@0x22 0x0D 0xB2 0x0C
//0.75V (nominal)
i2cset -f -y 14 0x22 0x00 1
i2ctransfer -f -y 14 w3@0x22 0x21 0x65 0x00
i2cset -f -y 14 0x22 0x00 2
i2ctransfer -f -y 14 w3@0x22 0x1D 0x5A 0x06
//0.75V (nominal)
i2cset -f -y 16 0x23 0x00 0
i2ctransfer -f -y 16 w3@0x23 0x21 0x65 0x00
i2cset -f -y 16 0x23 0x00 2
i2ctransfer -f -y 16 w3@0x23 0x0D 0xB2 0x0C
//0.75V (nominal)
i2cset -f -y 16 0x23 0x00 1
i2ctransfer -f -y 16 w3@0x23 0x21 0x65 0x00
i2cset -f -y 16 0x23 0x00 2
i2ctransfer -f -y 16 w3@0x23 0x1D 0x5A 0x06
//0.75V (nominal)
i2cset -f -y 16 0x24 0x00 0
i2ctransfer -f -y 16 w3@0x24 0x21 0x65 0x00
i2cset -f -y 16 0x24 0x00 2
i2ctransfer -f -y 16 w3@0x24 0x0D 0xB2 0x0C
//0.75V (nominal)
i2cset -f -y 16 0x24 0x00 1
i2ctransfer -f -y 16 w3@0x24 0x21 0x65 0x00
i2cset -f -y 16 0x24 0x00 2
i2ctransfer -f -y 16 w3@0x24 0x1D 0x5A 0x06
//1.5V (nominal)
i2cset -f -y 14 0x29 0x00 0
i2ctransfer -f -y 14 w3@0x29 0x21 0xFB 0x00
i2cset -f -y 14 0x29 0x00 2
i2ctransfer -f -y 14 w3@0x29 0x0D 0x71 0x1F
//1.5V (nominal)
i2cset -f -y 14 0x29 0x00 1
i2ctransfer -f -y 14 w3@0x29 0x21 0xFB 0x00
i2cset -f -y 14 0x29 0x00 2
i2ctransfer -f -y 14 w3@0x29 0x1D 0xB9 0x0F
//0.720V (nominal)
i2cset -f -y 14 0x27 0x00 0
i2ctransfer -f -y 14 w3@0x27 0x21 0x5F 0x00
i2cset -f -y 14 0x27 0x00 2
i2ctransfer -f -y 14 w3@0x27 0x0D 0xF4 0x0B
//0.720V (nominal)
i2cset -f -y 14 0x27 0x00 1
i2ctransfer -f -y 14 w3@0x27 0x21 0x5F 0x00
i2cset -f -y 14 0x27 0x00 2
i2ctransfer -f -y 14 w3@0x27 0x1D 0xFC 0x05
//0.720V (nominal)
i2cset -f -y 16 0x28 0x00 0
i2ctransfer -f -y 16 w3@0x28 0x21 0x5F 0x00
i2cset -f -y 16 0x28 0x00 2
i2ctransfer -f -y 16 w3@0x28 0x0D 0xF4 0x0B
//0.720V (nominal)
i2cset -f -y 16 0x28 0x00 1
i2ctransfer -f -y 16 w3@0x28 0x21 0x5F 0x00
i2cset -f -y 16 0x28 0x00 2
i2ctransfer -f -y 16 w3@0x28 0x1D 0xFC 0x05
//0.8V(nominal) , 0.8591V with load line
i2cset -f -y 14 0x20 0x00 0
i2ctransfer -f -y 14 w3@0x20 0x21 0x57 0x01
tools/Multiphase_Save.txt
+48
View File
@@ -0,0 +1,48 @@
i2cset -f -y 13 0x25 0x00 0
i2cset -f -y 13 0x25 0x15
i2cset -f -y 15 0x26 0x00 0
i2cset -f -y 15 0x26 0x15
i2cset -f -y 13 0x25 0x00 0
i2cset -f -y 13 0x25 0x15
i2cset -f -y 15 0x26 0x00 0
i2cset -f -y 15 0x26 0x15
i2cset -f -y 13 0x21 0x00 0
i2cset -f -y 13 0x21 0x15
i2cset -f -y 13 0x22 0x00 0
i2cset -f -y 13 0x22 0x15
i2cset -f -y 15 0x23 0x00 0
i2cset -f -y 15 0x23 0x15
i2cset -f -y 15 0x24 0x00 0
i2cset -f -y 15 0x24 0x15
i2cset -f -y 13 0x29 0x00 0
i2cset -f -y 13 0x29 0x15
i2cset -f -y 13 0x27 0x00 0
i2cset -f -y 13 0x27 0x15
i2cset -f -y 15 0x28 0x00 0
i2cset -f -y 15 0x28 0x15
i2cset -f -y 13 0x20 0x00 0
i2cset -f -y 13 0x20 0x17
i2cset -f -y 14 0x25 0x00 0
i2cset -f -y 14 0x25 0x15
i2cset -f -y 16 0x26 0x00 0
i2cset -f -y 16 0x26 0x15
i2cset -f -y 14 0x25 0x00 0
i2cset -f -y 14 0x25 0x15
i2cset -f -y 16 0x26 0x00 0
i2cset -f -y 16 0x26 0x15
i2cset -f -y 14 0x21 0x00 0
i2cset -f -y 14 0x21 0x15
i2cset -f -y 14 0x22 0x00 0
i2cset -f -y 14 0x22 0x15
i2cset -f -y 16 0x23 0x00 0
i2cset -f -y 16 0x23 0x15
i2cset -f -y 16 0x24 0x00 0
i2cset -f -y 16 0x24 0x15
i2cset -f -y 14 0x29 0x00 0
i2cset -f -y 14 0x29 0x15
i2cset -f -y 14 0x27 0x00 0
i2cset -f -y 14 0x27 0x15
i2cset -f -y 16 0x28 0x00 0
i2cset -f -y 16 0x28 0x15
i2cset -f -y 14 0x20 0x00 0
i2cset -f -y 14 0x20 0x17
tools/Multiphase_comboA.txt
+188
View File
@@ -0,0 +1,188 @@
//0.930V
i2cset -f -y 13 0x25 0x00 0
i2ctransfer -f -y 13 w3@0x25 0x21 0x89 0x00
i2cset -f -y 13 0x25 0x00 2
i2ctransfer -f -y 13 w3@0x25 0x0D 0x34 0x11
//0.930V
i2cset -f -y 15 0x26 0x00 0
i2ctransfer -f -y 15 w3@0x26 0x21 0x89 0x00
i2cset -f -y 15 0x26 0x00 2
i2ctransfer -f -y 15 w3@0x26 0x0D 0x34 0x11
//0.725V
i2cset -f -y 13 0x25 0x00 1
i2ctransfer -f -y 13 w3@0x25 0x21 0x60 0x00
i2cset -f -y 13 0x25 0x00 2
i2ctransfer -f -y 13 w3@0x25 0x1D 0x0A 0x06
//0.725V
i2cset -f -y 15 0x26 0x00 1
i2ctransfer -f -y 15 w3@0x26 0x21 0x60 0x00
i2cset -f -y 15 0x26 0x00 2
i2ctransfer -f -y 15 w3@0x26 0x1D 0x0A 0x06
//0.725V
i2cset -f -y 13 0x21 0x00 0
i2ctransfer -f -y 13 w3@0x21 0x21 0x60 0x00
i2cset -f -y 13 0x21 0x00 2
i2ctransfer -f -y 13 w3@0x21 0x0D 0x12 0x0C
//0.725V
i2cset -f -y 13 0x21 0x00 1
i2ctransfer -f -y 13 w3@0x21 0x21 0x60 0x00
i2cset -f -y 13 0x21 0x00 2
i2ctransfer -f -y 13 w3@0x21 0x1D 0x0A 0x06
//0.725V
i2cset -f -y 13 0x22 0x00 0
i2ctransfer -f -y 13 w3@0x22 0x21 0x60 0x00
i2cset -f -y 13 0x22 0x00 2
i2ctransfer -f -y 13 w3@0x22 0x0D 0x12 0x0C
//0.725V
i2cset -f -y 13 0x22 0x00 1
i2ctransfer -f -y 13 w3@0x22 0x21 0x60 0x00
i2cset -f -y 13 0x22 0x00 2
i2ctransfer -f -y 13 w3@0x22 0x1D 0x0A 0x06
//0.725V
i2cset -f -y 15 0x23 0x00 0
i2ctransfer -f -y 15 w3@0x23 0x21 0x60 0x00
i2cset -f -y 15 0x23 0x00 2
i2ctransfer -f -y 15 w3@0x23 0x0D 0x12 0x0C
//0.725V
i2cset -f -y 15 0x23 0x00 1
i2ctransfer -f -y 15 w3@0x23 0x21 0x60 0x00
i2cset -f -y 15 0x23 0x00 2
i2ctransfer -f -y 15 w3@0x23 0x1D 0x0A 0x06
//0.725V
i2cset -f -y 15 0x24 0x00 0
i2ctransfer -f -y 15 w3@0x24 0x21 0x60 0x00
i2cset -f -y 15 0x24 0x00 2
i2ctransfer -f -y 15 w3@0x24 0x0D 0x12 0x0C
//0.725V
i2cset -f -y 15 0x24 0x00 1
i2ctransfer -f -y 15 w3@0x24 0x21 0x60 0x00
i2cset -f -y 15 0x24 0x00 2
i2ctransfer -f -y 15 w3@0x24 0x1D 0x0A 0x06
//1.545V
i2cset -f -y 13 0x29 0x00 0
i2ctransfer -f -y 13 w3@0x29 0x21 0x04 0x01
i2cset -f -y 13 0x29 0x00 2
i2ctransfer -f -y 13 w3@0x29 0x0D 0x91 0x20
//1.545V
i2cset -f -y 13 0x29 0x00 1
i2ctransfer -f -y 13 w3@0x29 0x21 0x04 0x01
i2cset -f -y 13 0x29 0x00 2
i2ctransfer -f -y 13 w3@0x29 0x1D 0x49 0x10
//0.745V
i2cset -f -y 13 0x27 0x00 0
i2ctransfer -f -y 13 w3@0x27 0x21 0x64 0x00
i2cset -f -y 13 0x27 0x00 2
i2ctransfer -f -y 13 w3@0x27 0x0D 0x94 0x0C
//0.745V
i2cset -f -y 13 0x27 0x00 1
i2ctransfer -f -y 13 w3@0x27 0x21 0x64 0x00
i2cset -f -y 13 0x27 0x00 2
i2ctransfer -f -y 13 w3@0x27 0x1D 0x4C 0x06
//0.745V
i2cset -f -y 15 0x28 0x00 0
i2ctransfer -f -y 15 w3@0x28 0x21 0x64 0x00
i2cset -f -y 15 0x28 0x00 2
i2ctransfer -f -y 15 w3@0x28 0x0D 0x94 0x0C
//0.745V
i2cset -f -y 15 0x28 0x00 1
i2ctransfer -f -y 15 w3@0x28 0x21 0x64 0x00
i2cset -f -y 15 0x28 0x00 2
i2ctransfer -f -y 15 w3@0x28 0x1D 0x4C 0x06
//0.885V
i2cset -f -y 13 0x20 0x00 0
i2ctransfer -f -y 13 w3@0x20 0x21 0x62 0x01
//0.930V
i2cset -f -y 14 0x25 0x00 0
i2ctransfer -f -y 14 w3@0x25 0x21 0x89 0x00
i2cset -f -y 14 0x25 0x00 2
i2ctransfer -f -y 14 w3@0x25 0x0D 0x34 0x11
//0.930V
i2cset -f -y 16 0x26 0x00 0
i2ctransfer -f -y 16 w3@0x26 0x21 0x89 0x00
i2cset -f -y 16 0x26 0x00 2
i2ctransfer -f -y 16 w3@0x26 0x0D 0x34 0x11
//0.725V
i2cset -f -y 14 0x25 0x00 1
i2ctransfer -f -y 14 w3@0x25 0x21 0x60 0x00
i2cset -f -y 14 0x25 0x00 2
i2ctransfer -f -y 14 w3@0x25 0x1D 0x0A 0x06
//0.725V
i2cset -f -y 16 0x26 0x00 1
i2ctransfer -f -y 16 w3@0x26 0x21 0x60 0x00
i2cset -f -y 16 0x26 0x00 2
i2ctransfer -f -y 16 w3@0x26 0x1D 0x0A 0x06
//0.725V
i2cset -f -y 14 0x21 0x00 0
i2ctransfer -f -y 14 w3@0x21 0x21 0x60 0x00
i2cset -f -y 14 0x21 0x00 2
i2ctransfer -f -y 14 w3@0x21 0x0D 0x12 0x0C
//0.725V
i2cset -f -y 14 0x21 0x00 1
i2ctransfer -f -y 14 w3@0x21 0x21 0x60 0x00
i2cset -f -y 14 0x21 0x00 2
i2ctransfer -f -y 14 w3@0x21 0x1D 0x0A 0x06
//0.725V
i2cset -f -y 14 0x22 0x00 0
i2ctransfer -f -y 14 w3@0x22 0x21 0x60 0x00
i2cset -f -y 14 0x22 0x00 2
i2ctransfer -f -y 14 w3@0x22 0x0D 0x12 0x0C
//0.725V
i2cset -f -y 14 0x22 0x00 1
i2ctransfer -f -y 14 w3@0x22 0x21 0x60 0x00
i2cset -f -y 14 0x22 0x00 2
i2ctransfer -f -y 14 w3@0x22 0x1D 0x0A 0x06
//0.725V
i2cset -f -y 16 0x23 0x00 0
i2ctransfer -f -y 16 w3@0x23 0x21 0x60 0x00
i2cset -f -y 16 0x23 0x00 2
i2ctransfer -f -y 16 w3@0x23 0x0D 0x12 0x0C
//0.725V
i2cset -f -y 16 0x23 0x00 1
i2ctransfer -f -y 16 w3@0x23 0x21 0x60 0x00
i2cset -f -y 16 0x23 0x00 2
i2ctransfer -f -y 16 w3@0x23 0x1D 0x0A 0x06
//0.725V
i2cset -f -y 16 0x24 0x00 0
i2ctransfer -f -y 16 w3@0x24 0x21 0x60 0x00
i2cset -f -y 16 0x24 0x00 2
i2ctransfer -f -y 16 w3@0x24 0x0D 0x12 0x0C
//0.725V
i2cset -f -y 16 0x24 0x00 1
i2ctransfer -f -y 16 w3@0x24 0x21 0x60 0x00
i2cset -f -y 16 0x24 0x00 2
i2ctransfer -f -y 16 w3@0x24 0x1D 0x0A 0x06
//1.545V
i2cset -f -y 14 0x29 0x00 0
i2ctransfer -f -y 14 w3@0x29 0x21 0x04 0x01
i2cset -f -y 14 0x29 0x00 2
i2ctransfer -f -y 14 w3@0x29 0x0D 0x91 0x20
//1.545V
i2cset -f -y 14 0x29 0x00 1
i2ctransfer -f -y 14 w3@0x29 0x21 0x04 0x01
i2cset -f -y 14 0x29 0x00 2
i2ctransfer -f -y 14 w3@0x29 0x1D 0x49 0x10
//0.745V
i2cset -f -y 14 0x27 0x00 0
i2ctransfer -f -y 14 w3@0x27 0x21 0x64 0x00
i2cset -f -y 14 0x27 0x00 2
i2ctransfer -f -y 14 w3@0x27 0x0D 0x94 0x0C
//0.745V
i2cset -f -y 14 0x27 0x00 1
i2ctransfer -f -y 14 w3@0x27 0x21 0x64 0x00
i2cset -f -y 14 0x27 0x00 2
i2ctransfer -f -y 14 w3@0x27 0x1D 0x4C 0x06
//0.745V
i2cset -f -y 16 0x28 0x00 0
i2ctransfer -f -y 16 w3@0x28 0x21 0x64 0x00
i2cset -f -y 16 0x28 0x00 2
i2ctransfer -f -y 16 w3@0x28 0x0D 0x94 0x0C
//0.745V
i2cset -f -y 16 0x28 0x00 1
i2ctransfer -f -y 16 w3@0x28 0x21 0x64 0x00
i2cset -f -y 16 0x28 0x00 2
i2ctransfer -f -y 16 w3@0x28 0x1D 0x4C 0x06
//0.885V
i2cset -f -y 14 0x20 0x00 0
i2ctransfer -f -y 14 w3@0x20 0x21 0x62 0x01
tools/Multiphase_comboB.txt
+188
View File
@@ -0,0 +1,188 @@
//0.870V
i2cset -f -y 13 0x25 0x00 0
i2ctransfer -f -y 13 w3@0x25 0x21 0x7D 0x00
i2cset -f -y 13 0x25 0x00 2
i2ctransfer -f -y 13 w3@0x25 0x0D 0xB4 0x0F
//0.870V
i2cset -f -y 15 0x26 0x00 0
i2ctransfer -f -y 15 w3@0x26 0x21 0x7D 0x00
i2cset -f -y 15 0x26 0x00 2
i2ctransfer -f -y 15 w3@0x26 0x0D 0xB4 0x0F
//0.775V
i2cset -f -y 13 0x25 0x00 1
i2ctransfer -f -y 13 w3@0x25 0x21 0x6A 0x00
i2cset -f -y 13 0x25 0x00 2
i2ctransfer -f -y 13 w3@0x25 0x1D 0xAA 0x06
//0.775V
i2cset -f -y 15 0x26 0x00 1
i2ctransfer -f -y 15 w3@0x26 0x21 0x6A 0x00
i2cset -f -y 15 0x26 0x00 2
i2ctransfer -f -y 15 w3@0x26 0x1D 0xAA 0x06
//0.775V
i2cset -f -y 13 0x21 0x00 0
i2ctransfer -f -y 13 w3@0x21 0x21 0x6A 0x00
i2cset -f -y 13 0x21 0x00 2
i2ctransfer -f -y 13 w3@0x21 0x0D 0x52 0x0D
//0.775V
i2cset -f -y 13 0x21 0x00 1
i2ctransfer -f -y 13 w3@0x21 0x21 0x6A 0x00
i2cset -f -y 13 0x21 0x00 2
i2ctransfer -f -y 13 w3@0x21 0x1D 0xAA 0x06
//0.775V
i2cset -f -y 13 0x22 0x00 0
i2ctransfer -f -y 13 w3@0x22 0x21 0x6A 0x00
i2cset -f -y 13 0x22 0x00 2
i2ctransfer -f -y 13 w3@0x22 0x0D 0x52 0x0D
//0.775V
i2cset -f -y 13 0x22 0x00 1
i2ctransfer -f -y 13 w3@0x22 0x21 0x6A 0x00
i2cset -f -y 13 0x22 0x00 2
i2ctransfer -f -y 13 w3@0x22 0x1D 0xAA 0x06
//0.775V
i2cset -f -y 15 0x23 0x00 0
i2ctransfer -f -y 15 w3@0x23 0x21 0x6A 0x00
i2cset -f -y 15 0x23 0x00 2
i2ctransfer -f -y 15 w3@0x23 0x0D 0x52 0x0D
//0.775V
i2cset -f -y 15 0x23 0x00 1
i2ctransfer -f -y 15 w3@0x23 0x21 0x6A 0x00
i2cset -f -y 15 0x23 0x00 2
i2ctransfer -f -y 15 w3@0x23 0x1D 0xAA 0x06
//0.775V
i2cset -f -y 15 0x24 0x00 0
i2ctransfer -f -y 15 w3@0x24 0x21 0x6A 0x00
i2cset -f -y 15 0x24 0x00 2
i2ctransfer -f -y 15 w3@0x24 0x0D 0x52 0x0D
//0.775V
i2cset -f -y 15 0x24 0x00 1
i2ctransfer -f -y 15 w3@0x24 0x21 0x6A 0x00
i2cset -f -y 15 0x24 0x00 2
i2ctransfer -f -y 15 w3@0x24 0x1D 0xAA 0x06
//1.455V
i2cset -f -y 13 0x29 0x00 0
i2ctransfer -f -y 13 w3@0x29 0x21 0xF2 0x00
i2cset -f -y 13 0x29 0x00 2
i2ctransfer -f -y 13 w3@0x29 0x0D 0x51 0x1E
//1.455V
i2cset -f -y 13 0x29 0x00 1
i2ctransfer -f -y 13 w3@0x29 0x21 0xF2 0x00
i2cset -f -y 13 0x29 0x00 2
i2ctransfer -f -y 13 w3@0x29 0x1D 0x29 0x0F
//0.695V
i2cset -f -y 13 0x27 0x00 0
i2ctransfer -f -y 13 w3@0x27 0x21 0x5A 0x00
i2cset -f -y 13 0x27 0x00 2
i2ctransfer -f -y 13 w3@0x27 0x0D 0x54 0x0B
//0.695V
i2cset -f -y 13 0x27 0x00 1
i2ctransfer -f -y 13 w3@0x27 0x21 0x5A 0x00
i2cset -f -y 13 0x27 0x00 2
i2ctransfer -f -y 13 w3@0x27 0x1D 0xAC 0x05
//0.695V
i2cset -f -y 15 0x28 0x00 0
i2ctransfer -f -y 15 w3@0x28 0x21 0x5A 0x00
i2cset -f -y 15 0x28 0x00 2
i2ctransfer -f -y 15 w3@0x28 0x0D 0x54 0x0B
//0.695V
i2cset -f -y 15 0x28 0x00 1
i2ctransfer -f -y 15 w3@0x28 0x21 0x5A 0x00
i2cset -f -y 15 0x28 0x00 2
i2ctransfer -f -y 15 w3@0x28 0x1D 0xAC 0x05
//0.753V
i2cset -f -y 13 0x20 0x00 0
i2ctransfer -f -y 13 w3@0x20 0x21 0x2D 0x01
//0.870V
i2cset -f -y 14 0x25 0x00 0
i2ctransfer -f -y 14 w3@0x25 0x21 0x7D 0x00
i2cset -f -y 14 0x25 0x00 2
i2ctransfer -f -y 14 w3@0x25 0x0D 0xB4 0x0F
//0.870V
i2cset -f -y 16 0x26 0x00 0
i2ctransfer -f -y 16 w3@0x26 0x21 0x7D 0x00
i2cset -f -y 16 0x26 0x00 2
i2ctransfer -f -y 16 w3@0x26 0x0D 0xB4 0x0F
//0.775V
i2cset -f -y 14 0x25 0x00 1
i2ctransfer -f -y 14 w3@0x25 0x21 0x6A 0x00
i2cset -f -y 14 0x25 0x00 2
i2ctransfer -f -y 14 w3@0x25 0x1D 0xAA 0x06
//0.775V
i2cset -f -y 16 0x26 0x00 1
i2ctransfer -f -y 16 w3@0x26 0x21 0x6A 0x00
i2cset -f -y 16 0x26 0x00 2
i2ctransfer -f -y 16 w3@0x26 0x1D 0xAA 0x06
//0.775V
i2cset -f -y 14 0x21 0x00 0
i2ctransfer -f -y 14 w3@0x21 0x21 0x6A 0x00
i2cset -f -y 14 0x21 0x00 2
i2ctransfer -f -y 14 w3@0x21 0x0D 0x52 0x0D
//0.775V
i2cset -f -y 14 0x21 0x00 1
i2ctransfer -f -y 14 w3@0x21 0x21 0x6A 0x00
i2cset -f -y 14 0x21 0x00 2
i2ctransfer -f -y 14 w3@0x21 0x1D 0xAA 0x06
//0.775V
i2cset -f -y 14 0x22 0x00 0
i2ctransfer -f -y 14 w3@0x22 0x21 0x6A 0x00
i2cset -f -y 14 0x22 0x00 2
i2ctransfer -f -y 14 w3@0x22 0x0D 0x52 0x0D
//0.775V
i2cset -f -y 14 0x22 0x00 1
i2ctransfer -f -y 14 w3@0x22 0x21 0x6A 0x00
i2cset -f -y 14 0x22 0x00 2
i2ctransfer -f -y 14 w3@0x22 0x1D 0xAA 0x06
//0.775V
i2cset -f -y 16 0x23 0x00 0
i2ctransfer -f -y 16 w3@0x23 0x21 0x6A 0x00
i2cset -f -y 16 0x23 0x00 2
i2ctransfer -f -y 16 w3@0x23 0x0D 0x52 0x0D
//0.775V
i2cset -f -y 16 0x23 0x00 1
i2ctransfer -f -y 16 w3@0x23 0x21 0x6A 0x00
i2cset -f -y 16 0x23 0x00 2
i2ctransfer -f -y 16 w3@0x23 0x1D 0xAA 0x06
//0.775V
i2cset -f -y 16 0x24 0x00 0
i2ctransfer -f -y 16 w3@0x24 0x21 0x6A 0x00
i2cset -f -y 16 0x24 0x00 2
i2ctransfer -f -y 16 w3@0x24 0x0D 0x52 0x0D
//0.775V
i2cset -f -y 16 0x24 0x00 1
i2ctransfer -f -y 16 w3@0x24 0x21 0x6A 0x00
i2cset -f -y 16 0x24 0x00 2
i2ctransfer -f -y 16 w3@0x24 0x1D 0xAA 0x06
//1.455V
i2cset -f -y 14 0x29 0x00 0
i2ctransfer -f -y 14 w3@0x29 0x21 0xF2 0x00
i2cset -f -y 14 0x29 0x00 2
i2ctransfer -f -y 14 w3@0x29 0x0D 0x51 0x1E
//1.455V
i2cset -f -y 14 0x29 0x00 1
i2ctransfer -f -y 14 w3@0x29 0x21 0xF2 0x00
i2cset -f -y 14 0x29 0x00 2
i2ctransfer -f -y 14 w3@0x29 0x1D 0x29 0x0F
//0.695V
i2cset -f -y 14 0x27 0x00 0
i2ctransfer -f -y 14 w3@0x27 0x21 0x5A 0x00
i2cset -f -y 14 0x27 0x00 2
i2ctransfer -f -y 14 w3@0x27 0x0D 0x54 0x0B
//0.695V
i2cset -f -y 14 0x27 0x00 1
i2ctransfer -f -y 14 w3@0x27 0x21 0x5A 0x00
i2cset -f -y 14 0x27 0x00 2
i2ctransfer -f -y 14 w3@0x27 0x1D 0xAC 0x05
//0.695V
i2cset -f -y 16 0x28 0x00 0
i2ctransfer -f -y 16 w3@0x28 0x21 0x5A 0x00
i2cset -f -y 16 0x28 0x00 2
i2ctransfer -f -y 16 w3@0x28 0x0D 0x54 0x0B
//0.695V
i2cset -f -y 16 0x28 0x00 1
i2ctransfer -f -y 16 w3@0x28 0x21 0x5A 0x00
i2cset -f -y 16 0x28 0x00 2
i2ctransfer -f -y 16 w3@0x28 0x1D 0xAC 0x05
//0.753V
i2cset -f -y 14 0x20 0x00 0
i2ctransfer -f -y 14 w3@0x20 0x21 0x2D 0x01
tools/Multiphase_high3.txt
+188
View File
@@ -0,0 +1,188 @@
//0.930V
i2cset -f -y 13 0x25 0x00 0
i2ctransfer -f -y 13 w3@0x25 0x21 0x89 0x00
i2cset -f -y 13 0x25 0x00 2
i2ctransfer -f -y 13 w3@0x25 0x0D 0x34 0x11
//0.930V
i2cset -f -y 15 0x26 0x00 0
i2ctransfer -f -y 15 w3@0x26 0x21 0x89 0x00
i2cset -f -y 15 0x26 0x00 2
i2ctransfer -f -y 15 w3@0x26 0x0D 0x34 0x11
//0.775V
i2cset -f -y 13 0x25 0x00 1
i2ctransfer -f -y 13 w3@0x25 0x21 0x6A 0x00
i2cset -f -y 13 0x25 0x00 2
i2ctransfer -f -y 13 w3@0x25 0x1D 0xAA 0x06
//0.775V
i2cset -f -y 15 0x26 0x00 1
i2ctransfer -f -y 15 w3@0x26 0x21 0x6A 0x00
i2cset -f -y 15 0x26 0x00 2
i2ctransfer -f -y 15 w3@0x26 0x1D 0xAA 0x06
//0.775V
i2cset -f -y 13 0x21 0x00 0
i2ctransfer -f -y 13 w3@0x21 0x21 0x6A 0x00
i2cset -f -y 13 0x21 0x00 2
i2ctransfer -f -y 13 w3@0x21 0x0D 0x52 0x0D
//0.775V
i2cset -f -y 13 0x21 0x00 1
i2ctransfer -f -y 13 w3@0x21 0x21 0x6A 0x00
i2cset -f -y 13 0x21 0x00 2
i2ctransfer -f -y 13 w3@0x21 0x1D 0xAA 0x06
//0.775V
i2cset -f -y 13 0x22 0x00 0
i2ctransfer -f -y 13 w3@0x22 0x21 0x6A 0x00
i2cset -f -y 13 0x22 0x00 2
i2ctransfer -f -y 13 w3@0x22 0x0D 0x52 0x0D
//0.775V
i2cset -f -y 13 0x22 0x00 1
i2ctransfer -f -y 13 w3@0x22 0x21 0x6A 0x00
i2cset -f -y 13 0x22 0x00 2
i2ctransfer -f -y 13 w3@0x22 0x1D 0xAA 0x06
//0.775V
i2cset -f -y 15 0x23 0x00 0
i2ctransfer -f -y 15 w3@0x23 0x21 0x6A 0x00
i2cset -f -y 15 0x23 0x00 2
i2ctransfer -f -y 15 w3@0x23 0x0D 0x52 0x0D
//0.775V
i2cset -f -y 15 0x23 0x00 1
i2ctransfer -f -y 15 w3@0x23 0x21 0x6A 0x00
i2cset -f -y 15 0x23 0x00 2
i2ctransfer -f -y 15 w3@0x23 0x1D 0xAA 0x06
//0.775V
i2cset -f -y 15 0x24 0x00 0
i2ctransfer -f -y 15 w3@0x24 0x21 0x6A 0x00
i2cset -f -y 15 0x24 0x00 2
i2ctransfer -f -y 15 w3@0x24 0x0D 0x52 0x0D
//0.775V
i2cset -f -y 15 0x24 0x00 1
i2ctransfer -f -y 15 w3@0x24 0x21 0x6A 0x00
i2cset -f -y 15 0x24 0x00 2
i2ctransfer -f -y 15 w3@0x24 0x1D 0xAA 0x06
//1.545V
i2cset -f -y 13 0x29 0x00 0
i2ctransfer -f -y 13 w3@0x29 0x21 0x04 0x01
i2cset -f -y 13 0x29 0x00 2
i2ctransfer -f -y 13 w3@0x29 0x0D 0x91 0x20
//1.545V
i2cset -f -y 13 0x29 0x00 1
i2ctransfer -f -y 13 w3@0x29 0x21 0x04 0x01
i2cset -f -y 13 0x29 0x00 2
i2ctransfer -f -y 13 w3@0x29 0x1D 0x49 0x10
//0.745V
i2cset -f -y 13 0x27 0x00 0
i2ctransfer -f -y 13 w3@0x27 0x21 0x64 0x00
i2cset -f -y 13 0x27 0x00 2
i2ctransfer -f -y 13 w3@0x27 0x0D 0x94 0x0C
//0.745V
i2cset -f -y 13 0x27 0x00 1
i2ctransfer -f -y 13 w3@0x27 0x21 0x64 0x00
i2cset -f -y 13 0x27 0x00 2
i2ctransfer -f -y 13 w3@0x27 0x1D 0x4C 0x06
//0.745V
i2cset -f -y 15 0x28 0x00 0
i2ctransfer -f -y 15 w3@0x28 0x21 0x64 0x00
i2cset -f -y 15 0x28 0x00 2
i2ctransfer -f -y 15 w3@0x28 0x0D 0x94 0x0C
//0.745V
i2cset -f -y 15 0x28 0x00 1
i2ctransfer -f -y 15 w3@0x28 0x21 0x64 0x00
i2cset -f -y 15 0x28 0x00 2
i2ctransfer -f -y 15 w3@0x28 0x1D 0x4C 0x06
//0.885V
i2cset -f -y 13 0x20 0x00 0
i2ctransfer -f -y 13 w3@0x20 0x21 0x62 0x01
//0.930V
i2cset -f -y 14 0x25 0x00 0
i2ctransfer -f -y 14 w3@0x25 0x21 0x89 0x00
i2cset -f -y 14 0x25 0x00 2
i2ctransfer -f -y 14 w3@0x25 0x0D 0x34 0x11
//0.930V
i2cset -f -y 16 0x26 0x00 0
i2ctransfer -f -y 16 w3@0x26 0x21 0x89 0x00
i2cset -f -y 16 0x26 0x00 2
i2ctransfer -f -y 16 w3@0x26 0x0D 0x34 0x11
//0.775V
i2cset -f -y 14 0x25 0x00 1
i2ctransfer -f -y 14 w3@0x25 0x21 0x6A 0x00
i2cset -f -y 14 0x25 0x00 2
i2ctransfer -f -y 14 w3@0x25 0x1D 0xAA 0x06
//0.775V
i2cset -f -y 16 0x26 0x00 1
i2ctransfer -f -y 16 w3@0x26 0x21 0x6A 0x00
i2cset -f -y 16 0x26 0x00 2
i2ctransfer -f -y 16 w3@0x26 0x1D 0xAA 0x06
//0.775V
i2cset -f -y 14 0x21 0x00 0
i2ctransfer -f -y 14 w3@0x21 0x21 0x6A 0x00
i2cset -f -y 14 0x21 0x00 2
i2ctransfer -f -y 14 w3@0x21 0x0D 0x52 0x0D
//0.775V
i2cset -f -y 14 0x21 0x00 1
i2ctransfer -f -y 14 w3@0x21 0x21 0x6A 0x00
i2cset -f -y 14 0x21 0x00 2
i2ctransfer -f -y 14 w3@0x21 0x1D 0xAA 0x06
//0.775V
i2cset -f -y 14 0x22 0x00 0
i2ctransfer -f -y 14 w3@0x22 0x21 0x6A 0x00
i2cset -f -y 14 0x22 0x00 2
i2ctransfer -f -y 14 w3@0x22 0x0D 0x52 0x0D
//0.775V
i2cset -f -y 14 0x22 0x00 1
i2ctransfer -f -y 14 w3@0x22 0x21 0x6A 0x00
i2cset -f -y 14 0x22 0x00 2
i2ctransfer -f -y 14 w3@0x22 0x1D 0xAA 0x06
//0.775V
i2cset -f -y 16 0x23 0x00 0
i2ctransfer -f -y 16 w3@0x23 0x21 0x6A 0x00
i2cset -f -y 16 0x23 0x00 2
i2ctransfer -f -y 16 w3@0x23 0x0D 0x52 0x0D
//0.775V
i2cset -f -y 16 0x23 0x00 1
i2ctransfer -f -y 16 w3@0x23 0x21 0x6A 0x00
i2cset -f -y 16 0x23 0x00 2
i2ctransfer -f -y 16 w3@0x23 0x1D 0xAA 0x06
//0.775V
i2cset -f -y 16 0x24 0x00 0
i2ctransfer -f -y 16 w3@0x24 0x21 0x6A 0x00
i2cset -f -y 16 0x24 0x00 2
i2ctransfer -f -y 16 w3@0x24 0x0D 0x52 0x0D
//0.775V
i2cset -f -y 16 0x24 0x00 1
i2ctransfer -f -y 16 w3@0x24 0x21 0x6A 0x00
i2cset -f -y 16 0x24 0x00 2
i2ctransfer -f -y 16 w3@0x24 0x1D 0xAA 0x06
//1.545V
i2cset -f -y 14 0x29 0x00 0
i2ctransfer -f -y 14 w3@0x29 0x21 0x04 0x01
i2cset -f -y 14 0x29 0x00 2
i2ctransfer -f -y 14 w3@0x29 0x0D 0x91 0x20
//1.545V
i2cset -f -y 14 0x29 0x00 1
i2ctransfer -f -y 14 w3@0x29 0x21 0x04 0x01
i2cset -f -y 14 0x29 0x00 2
i2ctransfer -f -y 14 w3@0x29 0x1D 0x49 0x10
//0.745V
i2cset -f -y 14 0x27 0x00 0
i2ctransfer -f -y 14 w3@0x27 0x21 0x64 0x00
i2cset -f -y 14 0x27 0x00 2
i2ctransfer -f -y 14 w3@0x27 0x0D 0x94 0x0C
//0.745V
i2cset -f -y 14 0x27 0x00 1
i2ctransfer -f -y 14 w3@0x27 0x21 0x64 0x00
i2cset -f -y 14 0x27 0x00 2
i2ctransfer -f -y 14 w3@0x27 0x1D 0x4C 0x06
//0.745V
i2cset -f -y 16 0x28 0x00 0
i2ctransfer -f -y 16 w3@0x28 0x21 0x64 0x00
i2cset -f -y 16 0x28 0x00 2
i2ctransfer -f -y 16 w3@0x28 0x0D 0x94 0x0C
//0.745V
i2cset -f -y 16 0x28 0x00 1
i2ctransfer -f -y 16 w3@0x28 0x21 0x64 0x00
i2cset -f -y 16 0x28 0x00 2
i2ctransfer -f -y 16 w3@0x28 0x1D 0x4C 0x06
//0.885V
i2cset -f -y 14 0x20 0x00 0
i2ctransfer -f -y 14 w3@0x20 0x21 0x62 0x01
tools/Multiphase_low3.txt
+188
View File
@@ -0,0 +1,188 @@
//0.870V
i2cset -f -y 13 0x25 0x00 0
i2ctransfer -f -y 13 w3@0x25 0x21 0x7D 0x00
i2cset -f -y 13 0x25 0x00 2
i2ctransfer -f -y 13 w3@0x25 0x0D 0xB4 0x0F
//0.870V
i2cset -f -y 15 0x26 0x00 0
i2ctransfer -f -y 15 w3@0x26 0x21 0x7D 0x00
i2cset -f -y 15 0x26 0x00 2
i2ctransfer -f -y 15 w3@0x26 0x0D 0xB4 0x0F
//0.725V
i2cset -f -y 13 0x25 0x00 1
i2ctransfer -f -y 13 w3@0x25 0x21 0x60 0x00
i2cset -f -y 13 0x25 0x00 2
i2ctransfer -f -y 13 w3@0x25 0x1D 0x0A 0x06
//0.725V
i2cset -f -y 15 0x26 0x00 1
i2ctransfer -f -y 15 w3@0x26 0x21 0x60 0x00
i2cset -f -y 15 0x26 0x00 2
i2ctransfer -f -y 15 w3@0x26 0x1D 0x0A 0x06
//0.725V
i2cset -f -y 13 0x21 0x00 0
i2ctransfer -f -y 13 w3@0x21 0x21 0x60 0x00
i2cset -f -y 13 0x21 0x00 2
i2ctransfer -f -y 13 w3@0x21 0x0D 0x12 0x0C
//0.725V
i2cset -f -y 13 0x21 0x00 1
i2ctransfer -f -y 13 w3@0x21 0x21 0x60 0x00
i2cset -f -y 13 0x21 0x00 2
i2ctransfer -f -y 13 w3@0x21 0x1D 0x0A 0x06
//0.725V
i2cset -f -y 13 0x22 0x00 0
i2ctransfer -f -y 13 w3@0x22 0x21 0x60 0x00
i2cset -f -y 13 0x22 0x00 2
i2ctransfer -f -y 13 w3@0x22 0x0D 0x12 0x0C
//0.725V
i2cset -f -y 13 0x22 0x00 1
i2ctransfer -f -y 13 w3@0x22 0x21 0x60 0x00
i2cset -f -y 13 0x22 0x00 2
i2ctransfer -f -y 13 w3@0x22 0x1D 0x0A 0x06
//0.725V
i2cset -f -y 15 0x23 0x00 0
i2ctransfer -f -y 15 w3@0x23 0x21 0x60 0x00
i2cset -f -y 15 0x23 0x00 2
i2ctransfer -f -y 15 w3@0x23 0x0D 0x12 0x0C
//0.725V
i2cset -f -y 15 0x23 0x00 1
i2ctransfer -f -y 15 w3@0x23 0x21 0x60 0x00
i2cset -f -y 15 0x23 0x00 2
i2ctransfer -f -y 15 w3@0x23 0x1D 0x0A 0x06
//0.725V
i2cset -f -y 15 0x24 0x00 0
i2ctransfer -f -y 15 w3@0x24 0x21 0x60 0x00
i2cset -f -y 15 0x24 0x00 2
i2ctransfer -f -y 15 w3@0x24 0x0D 0x12 0x0C
//0.725V
i2cset -f -y 15 0x24 0x00 1
i2ctransfer -f -y 15 w3@0x24 0x21 0x60 0x00
i2cset -f -y 15 0x24 0x00 2
i2ctransfer -f -y 15 w3@0x24 0x1D 0x0A 0x06
//1.455V
i2cset -f -y 13 0x29 0x00 0
i2ctransfer -f -y 13 w3@0x29 0x21 0xF2 0x00
i2cset -f -y 13 0x29 0x00 2
i2ctransfer -f -y 13 w3@0x29 0x0D 0x51 0x1E
//1.455V
i2cset -f -y 13 0x29 0x00 1
i2ctransfer -f -y 13 w3@0x29 0x21 0xF2 0x00
i2cset -f -y 13 0x29 0x00 2
i2ctransfer -f -y 13 w3@0x29 0x1D 0x29 0x0F
//0.695V
i2cset -f -y 13 0x27 0x00 0
i2ctransfer -f -y 13 w3@0x27 0x21 0x5A 0x00
i2cset -f -y 13 0x27 0x00 2
i2ctransfer -f -y 13 w3@0x27 0x0D 0x54 0x0B
//0.695V
i2cset -f -y 13 0x27 0x00 1
i2ctransfer -f -y 13 w3@0x27 0x21 0x5A 0x00
i2cset -f -y 13 0x27 0x00 2
i2ctransfer -f -y 13 w3@0x27 0x1D 0xAC 0x05
//0.695V
i2cset -f -y 15 0x28 0x00 0
i2ctransfer -f -y 15 w3@0x28 0x21 0x5A 0x00
i2cset -f -y 15 0x28 0x00 2
i2ctransfer -f -y 15 w3@0x28 0x0D 0x54 0x0B
//0.695V
i2cset -f -y 15 0x28 0x00 1
i2ctransfer -f -y 15 w3@0x28 0x21 0x5A 0x00
i2cset -f -y 15 0x28 0x00 2
i2ctransfer -f -y 15 w3@0x28 0x1D 0xAC 0x05
//0.753V
i2cset -f -y 13 0x20 0x00 0
i2ctransfer -f -y 13 w3@0x20 0x21 0x2D 0x01
//0.870V
i2cset -f -y 14 0x25 0x00 0
i2ctransfer -f -y 14 w3@0x25 0x21 0x7D 0x00
i2cset -f -y 14 0x25 0x00 2
i2ctransfer -f -y 14 w3@0x25 0x0D 0xB4 0x0F
//0.870V
i2cset -f -y 16 0x26 0x00 0
i2ctransfer -f -y 16 w3@0x26 0x21 0x7D 0x00
i2cset -f -y 16 0x26 0x00 2
i2ctransfer -f -y 16 w3@0x26 0x0D 0xB4 0x0F
//0.725V
i2cset -f -y 14 0x25 0x00 1
i2ctransfer -f -y 14 w3@0x25 0x21 0x60 0x00
i2cset -f -y 14 0x25 0x00 2
i2ctransfer -f -y 14 w3@0x25 0x1D 0x0A 0x06
//0.725V
i2cset -f -y 16 0x26 0x00 1
i2ctransfer -f -y 16 w3@0x26 0x21 0x60 0x00
i2cset -f -y 16 0x26 0x00 2
i2ctransfer -f -y 16 w3@0x26 0x1D 0x0A 0x06
//0.725V
i2cset -f -y 14 0x21 0x00 0
i2ctransfer -f -y 14 w3@0x21 0x21 0x60 0x00
i2cset -f -y 14 0x21 0x00 2
i2ctransfer -f -y 14 w3@0x21 0x0D 0x12 0x0C
//0.725V
i2cset -f -y 14 0x21 0x00 1
i2ctransfer -f -y 14 w3@0x21 0x21 0x60 0x00
i2cset -f -y 14 0x21 0x00 2
i2ctransfer -f -y 14 w3@0x21 0x1D 0x0A 0x06
//0.725V
i2cset -f -y 14 0x22 0x00 0
i2ctransfer -f -y 14 w3@0x22 0x21 0x60 0x00
i2cset -f -y 14 0x22 0x00 2
i2ctransfer -f -y 14 w3@0x22 0x0D 0x12 0x0C
//0.725V
i2cset -f -y 14 0x22 0x00 1
i2ctransfer -f -y 14 w3@0x22 0x21 0x60 0x00
i2cset -f -y 14 0x22 0x00 2
i2ctransfer -f -y 14 w3@0x22 0x1D 0x0A 0x06
//0.725V
i2cset -f -y 16 0x23 0x00 0
i2ctransfer -f -y 16 w3@0x23 0x21 0x60 0x00
i2cset -f -y 16 0x23 0x00 2
i2ctransfer -f -y 16 w3@0x23 0x0D 0x12 0x0C
//0.725V
i2cset -f -y 16 0x23 0x00 1
i2ctransfer -f -y 16 w3@0x23 0x21 0x60 0x00
i2cset -f -y 16 0x23 0x00 2
i2ctransfer -f -y 16 w3@0x23 0x1D 0x0A 0x06
//0.725V
i2cset -f -y 16 0x24 0x00 0
i2ctransfer -f -y 16 w3@0x24 0x21 0x60 0x00
i2cset -f -y 16 0x24 0x00 2
i2ctransfer -f -y 16 w3@0x24 0x0D 0x12 0x0C
//0.725V
i2cset -f -y 16 0x24 0x00 1
i2ctransfer -f -y 16 w3@0x24 0x21 0x60 0x00
i2cset -f -y 16 0x24 0x00 2
i2ctransfer -f -y 16 w3@0x24 0x1D 0x0A 0x06
//1.455V
i2cset -f -y 14 0x29 0x00 0
i2ctransfer -f -y 14 w3@0x29 0x21 0xF2 0x00
i2cset -f -y 14 0x29 0x00 2
i2ctransfer -f -y 14 w3@0x29 0x0D 0x51 0x1E
//1.455V
i2cset -f -y 14 0x29 0x00 1
i2ctransfer -f -y 14 w3@0x29 0x21 0xF2 0x00
i2cset -f -y 14 0x29 0x00 2
i2ctransfer -f -y 14 w3@0x29 0x1D 0x29 0x0F
//0.695V
i2cset -f -y 14 0x27 0x00 0
i2ctransfer -f -y 14 w3@0x27 0x21 0x5A 0x00
i2cset -f -y 14 0x27 0x00 2
i2ctransfer -f -y 14 w3@0x27 0x0D 0x54 0x0B
//0.695V
i2cset -f -y 14 0x27 0x00 1
i2ctransfer -f -y 14 w3@0x27 0x21 0x5A 0x00
i2cset -f -y 14 0x27 0x00 2
i2ctransfer -f -y 14 w3@0x27 0x1D 0xAC 0x05
//0.695V
i2cset -f -y 16 0x28 0x00 0
i2ctransfer -f -y 16 w3@0x28 0x21 0x5A 0x00
i2cset -f -y 16 0x28 0x00 2
i2ctransfer -f -y 16 w3@0x28 0x0D 0x54 0x0B
//0.695V
i2cset -f -y 16 0x28 0x00 1
i2ctransfer -f -y 16 w3@0x28 0x21 0x5A 0x00
i2cset -f -y 16 0x28 0x00 2
i2ctransfer -f -y 16 w3@0x28 0x1D 0xAC 0x05
//0.753V
i2cset -f -y 14 0x20 0x00 0
i2ctransfer -f -y 14 w3@0x20 0x21 0x2D 0x01
tools/TR518.txt
+17
View File
@@ -0,0 +1,17 @@
//Start Unit0 Tr518
bcmcmd -n 0 -c 'port cd lb=mac'
bcmcmd -n 0 -c 'l2 learn off'
bcmcmd -n 0 -c 'dsh -c "test mode nr=yes"'
bcmcmd -n 0 -c 'dsh -c "tr 518 Scenario=6 Profile=2 Count=260 PktSize=324 PortList=1-259,270-565 rm=ext CheckLinkTime=20 CheckDataTime=200 testphase=1"'
//Stop Unit0 Tr518
bcmcmd -n 0 -c 'port cd lb=none'
//Start Unit1 Tr518
bcmcmd -n 1 -c 'port cd lb=mac'
bcmcmd -n 1 -c 'l2 learn off'
bcmcmd -n 1 -c 'dsh -c "test mode nr=yes"'
bcmcmd -n 1 -c 'dsh -c "tr 518 Scenario=6 Profile=2 Count=260 PktSize=324 PortList=1-259,270-565 rm=ext CheckLinkTime=20 CheckDataTime=200 testphase=1"'
//Stop Unit1 Tr518
bcmcmd -n 1 -c 'port cd lb=none'
tools/fan_ctrl.txt
+7
View File
@@ -0,0 +1,7 @@
echo 18-0020 > /sys/bus/i2c/drivers/max31790/unbind
sleep .5
echo 18-0020 > /sys/bus/i2c/drivers/max31790/bind
echo 25-0020 > /sys/bus/i2c/drivers/max31790/unbind
sleep .5
echo 25-0020 > /sys/bus/i2c/drivers/max31790/bind
fan-speed-control.sh 30
tools/gen_channel_map.sh
+59
View File
@@ -0,0 +1,59 @@
#!/bin/bash
# =============================================================================
# gen_channel_map.sh - Build docs/LTC2980_channel_map.csv from settings/*.conf
# Version : V1.0.0
# Date : 2026-08-27
# Author : ETWen
# =============================================================================
# Runs on the DEV machine, not the DUT. Reads every LTC2980 margin settings
# file and flattens CH<n>_VNOM / CH<n>_NET into one CSV:
#
# Board,CONN,Ch,NetName,Vnom
# CB,CONN13,CH0,V5P0_ALW,5.0
#
# NC channels keep their literal NC / "-" so the page numbering still lines up
# (ch/8 -> CHIPS[] index, ch%8 -> LTC2977 PAGE). Do not filter them out.
#
# Usage:
# tools/gen_channel_map.sh # write docs/LTC2980_channel_map.csv
# tools/gen_channel_map.sh - # write to stdout
# =============================================================================
set -eu
REPO_ROOT="$(cd "$(dirname "$0")/.." && pwd)"
SET_DIR="${REPO_ROOT}/src/Script_ABC_Blanton/Blanton_Script/LTC2980_Margin_Script/settings"
OUT="${1:-${REPO_ROOT}/docs/LTC2980_channel_map.csv}"
[ -d "${SET_DIR}" ] || { echo "settings dir not found: ${SET_DIR}" >&2; exit 1; }
# 3-argument match(str, regex, array) is a gawk extension. Under mawk it is a
# syntax error at best and an empty CSV at worst - fail loudly instead.
awk 'BEGIN { if (match("a", /a/, m) != 1) exit 1 }' 2>/dev/null \
|| { echo "need gawk (3-arg match); this awk is: $(awk --version 2>&1 | head -1)" >&2; exit 1; }
gen() {
printf 'Board,CONN,Ch,NetName,Vnom\n'
# CB first, then SWB0/SWB1 CONN13..CONN16 - matches the physical walk order.
for f in "${SET_DIR}"/Blanton_CB_CONN*.conf \
"${SET_DIR}"/Blanton_SWB0_CONN*.conf \
"${SET_DIR}"/Blanton_SWB1_CONN*.conf ; do
[ -f "${f}" ] || continue
base="$(basename "${f}" .conf)" # Blanton_SWB0_CONN13
board="$(echo "${base}" | cut -d_ -f2)" # SWB0
conn="$(echo "${base}" | cut -d_ -f3)" # CONN13
# .conf files are LF per .gitattributes, but strip CR anyway - a stray
# CR would land inside the net name and travel into the CSV unseen.
sed 's/\r$//' "${f}" | awk -v b="${board}" -v c="${conn}" '
match($0, /^CH([0-9]+)_VNOM="([^"]*)"[^"]*CH[0-9]+_NET="([^"]*)"/, m) {
printf "%s,%s,CH%s,%s,%s\n", b, c, m[1], m[3], m[2]
}'
done
}
if [ "${OUT}" = "-" ]; then
gen
else
gen > "${OUT}"
echo "wrote ${OUT} ($(($(wc -l < "${OUT}") - 1)) channels)"
fi